PELCO® MINI HOT VAC DESICCATOR
Vacuum and Heat; Functions as a Desiccator or Mini Drying Station
Vacuum Gauge
Vacuum Valve
Glass Bell Jar
1/4” Barbed Fitting
Viton® O-Ring
Vacuum Plate
Temperature Gauge
An efficient way to warm embedding plastics while removing gas bubbles. The aluminum base is placed
on a laboratory heating plate (optional). A vacuum can be drawn through a provided porthole in the baseplate using an optional vacuum pump. A digital thermometer (included) measures the plate temperature.
Can be used up to 120°C (248°F). Bell jar made out of glass, Silicone o-ring seal. Vacuum gauge (showing inches of mercury), 3-way valve with filtered vent with a 1/2” Hose Connection (standard) to connect
vacuum systems with a 1/2” ID vacuum hose. A 3/8” Hose Connection is also included for 3/8” or 1/4” ID
hose. Inside dimensions are 6” Dia. x 3” H (15.3 x 7.6cm).
2245PELCO® Mini Hot Vac Vacuum Desiccator................................................................................................... each
©Ted Pella, Inc. 2-25-2015, Printed in U.S.A.
TED PELLA, INC.
Microscopy Products for Science and Industry
www.tedpella.com
sales@tedpella.com
800-237-3526