NTM-6630 (HID CMH Track Head)

advertisement
NTM-6630 (HID CMH Track Head)
Slim Ballast Reflector Shroud HID CMH Track Fixture
Lamp: CDM 39W-70W PAR30 CMH (Not Included)
PRODUCT DESCRIPTION
Ceramic Metal Halide (CMH) Shroud fixture accepts either a PAR reflector light source or
comes equipped with a faceted reflector to efficiently project light from a CMH ED17 source.
Electronic ballast is encased in unique slim ballast casing and is suitable for use with high
CRI ceramic-type PAR metal halide light sources
Type
Project
Catalog No.
Lamp/Wattage
Dimensions
NTM-6630
Features
• Solid State Electronic Ballast in Slim Die Cast Aluminum Casing.
• Integral On/Off Switch.
• Deep drawn one-piece steel socket cup & reflector shroud.
• One or two circuit track capable.
Construction
Housing and Socket and Reflector Shroud
.060 Deep drawn steel construction with softened edges. Conical face completely houses
faceted reflector and lamp. L-Bracket provides firm friction hold for accurate aiming
Shield
.11 Tempered shield reduces UV radiation and provides protection in case of ED-17 light
source failure/shattering.
Diameter: 4-3/8"
Length: 6-3/4"
Max. Extension: 11"
Electrical System
Wiring
Teflon coated wire lead connects socket and housing to ballast. Teflon sleeve is durable and
resists heat degradation from lamp and housing radiation.
Socket
4KV 660VA/600V Porcelain jacketed aluminum screw thread medium-base socket.
Ballast Housing
Integral high power factor electronic solid state Type-1 ballast housed in .11 low profile
slim die cast enclosure. Enclosure features die cast construction, artistic finishing detail,
secure locking to track, interchangeability with other fixtures, and on/off switch allowing
individual fixture to be switched off without removing from track. Ballast provides automatic
termination upon end of lamp life. i.e. “End of Life” protection.
Input Voltage: Power Factor: Sound Rating: Frequency: Min. Starting Temp.: Total Harmonic Distortion: Ballast Life Expectancy: Input Power: Input Watts: Operating Amps: Labels and Listings
UL Listed.
120V
>95%
A
170 Hz (square wave)
5˚F (-15˚C)
<10%
56,000 hours (at 75˚C)
39W
70W
44
78
.37
.67
Contact head assembly
Three .030 stainless steel contacts mounted in high heat rated plastic housing.
Finishes
Powder coated finishes available (Black, Silver and White). Custom finishes are available,
please contact factory.
Slim Ballast Reflector Shroud HID CMH Track fixture
Catalog No.
Wattage
Finish
Style
NTM-6630
/35W
B = Black
(Blank) = H-Style
/70W
S = Silver
/J = J-Style
W = White
/L = L-Style
Create a complete track head number:
Example: N T M - 6 6 3 0 / 3 5 B
6505 Gayhart St., Commerce, CA 90040 • Phone: 800.686.6672 • FAX: 800.500.9955 • www.noralighting.com
e-mail: nora@noralighting.com • Specifications subject to change without notice. © 2014
Download