KASPER KOVO water treatment systems product range includes devices for various applications, which are mainly used for power generation and industrial production. It includes technological processing from the source of raw water until heating. The main parts of this process are clarification, filtration, softening, decarbonisation, demineralization and degassing. There are also solutions for the technology of liquids and solids storage, and heat exchangers for the cooling towers water treatment equipment. Production is carried out in accordance with European and other international standards ES/97/23, ASME VIII, GOST, HP AD 2000.
We can supply equipment to the diameter of 4,500 mm and the volume of 150 m3. Special devices are designed for a variety of media and use according to the project specification or customer requirements.
According to your request we will prepare a specific offer for your project and also atypical appliances out of the specified product line.
The manufactured products are supplied with complete accompanying technical documentation including all authorizations, inspection, test steps and test reports.
Tanks are mainly used in boiler plants for storage of incoming water, condensate and demineralised water, or various chemical solutions.
The right type and modification of the tank is chosen depending on the type of the stored liquid and its operating pressure and temperature.
The tanks are cylindrical in shape, enclosed by shaped bottoms. To check the inside, they are fitted with one or two man-holes. According to the positioning, there are horizontal or vertical types. The basic equipment of tanks is: one neck for discharging and one neck for venting (Necks PN 16).
Standard accessories vary for different tank types and designs as described below. Other required accessories (operating necks, heating, etc.) are to be specified separately.
Tanks are divided according to the type:
• Horizontal;
• Vertical.
Pressure range is as stated in the project specification.
The tanks are coated as per customer requirement.
Type and modification of the tank are marked with letters
• H – Horizontal tank;
• V – Vertical tank.
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008

Neck sizes, their number and location can be changed based on customer requirements. Similarly, you can specify any special requirements for man-holes or other additional equipment of the tank.
Průlez DN 600 = Man-hole DN 600
Construction dimensions of all types of containers are designed in the offer according to the specific requirement.
Upon your request, we can also produce steel tanks with higher working pressure and different volume.
________________________________________
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008

Tanks are mainly used in boiler plants for storage of aggressive chemical solutions. The right type and modification of the tank and its inner surface treatment is chosen depending on the type of the stored liquid, its operating pressure and temperature.
The tanks are cylindrical in shape, enclosed by shaped bottoms. To check the inside, they are fitted with one or two man-holes. According to the positioning, there are horizontal or vertical types.
Rubber-coated – a different type of anti-corrosive protection can be agreed upon instead of rubber-coating.
Type and modification of the tank are marked with letters:
• HG – Horizontal rubber-coated tank;
• VG – Vertical rubber-coated tank.
Neck sizes, their number and location can be changed according to customer requirements. Similarly, you can specify any special requirements for man-holes or other additional equipment of the tank.
Upon your request, we can also produce rubber-coated tanks with higher working pressure and different volume.
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008

Tanks for chemical solutions are used for the preparation and measurement of regeneration chemicals, but they may also be used for the storage of chemical solutions and so on. Tanks in the standard modification can not be used for sulphuric acid. Combining the necessary accessories, such as dissolving basket, bag tippler, equipment for mechanical mixing, heating element or distribution of compressed air can be used to modify tanks for various applications.
Tanks for chemical solutions are designed as pressure-free, cylindrical containers, with a flat bottom at the top, which is for all sizes, excluding 0.4 m3, rigidly welded to the shell. Steel tank inner surface is not chemically treated. Outside surface of all the tanks is primed or treated according to the customer requirement.
• 1pc – Level gauge
• 1pc – Mixing equipment
• 1pc – Sampling
• 1pc – Sampling neck – supplied either loose or welded to the tank
• 1pc – Overflow pipe
• Dissolving basket
• Heating element – welded on the shop floor
• Thermometer
Topný článek = Heating element
Rozpouštěcí koš = Dissolving basket
Upon your request, we can also produce tanks of different sizes and modifications.
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008

Tanks for chemical solutions are used for the preparation and measurement of regeneration chemicals, but may also be used for the storage of chemical solutions and so on. Tanks in the standard version can not be used for sulphuric acid. Combining the necessary accessories, such as dissolving basket, bag tippler, equipment for mechanical mixing, heating element or distribution of compressed air can be used to modify tanks for various applications.
Tanks for chemical solutions as shown in the picture are designed as pressure-free, cylindrical containers, with a flat bottom at the top, which is for all sizes, excluding 0.4 m3, rigidly welded to the shell. The inner surface of the tank is rubber-coated with a flat removable bottom. Outside surface of all the tanks is primed.
Tanks are delivered without packaging, in bulk. Small removable parts are supplied separately in crates. Tanks for chemical solutions must be stored so as to prevent mechanical damage and to protect them from the elements.
• 1pc – Level gauge
• 1pc – Sampling
• 1pc – Mixing equipment
• Dissolving basket
• Heating element including thermometer
• Neck including the remote level gauge probe
Vstupy
Rozpouštěcí koš - heating element
Topný článek
- inlets
- dissolving basket
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008

Rozpouštěcí koš - dissolving basket
Vzduch
Topný článek
Přepad
- air
- heating element
- overflow
Upon your request, we can also produce rubber-coated tanks with higher working pressure and different volume.
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008

KS Deaerators (hereinafter referred to as deaerators) are used for physical degassing of water supply. The purpose of degassing is the reduction of O2 and
CO2 gases, in particular in the in-feed water of boilers to prevent corrosion.
The deaerator is a vertical cylindrical vessel, closed at the top with a dished bottom with a man-hole and with a built-in vapour drain. On the shell of the deaerator there is a neck for water inlet and a pressure-vacuum gauge. The lower cylindrical part of the deaerator is welded to the degassed water tank. The built-in inner assembly is designed to create the conditions for effective separation of gases from the incoming water. Heating steam for the deaerator is fed into the degassed water tank above the maximum level. Both saturated and superheated steam can be used, taking into account the maximum calculated wall temperature of the deaerator of 200ºC. The maximum operating pressure of deaerators can be 0.07 MPa. The outer surface of the deaerator is primed.
After entering the deaerator, water is fed into the spray section where it is dispersed through the special nozzles and then it goes through the shower section. The heating steam for the deaerator is fed into the tank above the maximum water level. It is desired that the neck for the heating steam is as far from the deaerator as possible and thus supports the flow of steam above the feeding water. Steam may also be fed into boiling barbotage, which is required to achieve the residual oxygen content below 10 uq/l of degassed water.
Barbotage is available upon request as the tank accessory. Design of the deaerators is shown in the figures below.
Deaerators are designed for use with heating steam both saturated and superheated. In case of using superheated steam, the highest design temperature and the operating temperature of the wall of 200ºC have to be considered. The maximum operating pressure of deaerators can be 0.07 MPa. For proper operation of the deaerator it is necessary to maintain a constant pressure inside the deaerator.
The rate of linear pressure increase or decrease must not be greater than 20 kPa/min.
• Water flow rate (maximum and minimum);
• The maximum required heating of water in the deaerator;
• The maximum operating pressure in the deaerator;
• Temperature and pressure of the heating steam;
• Desired value of the residual oxygen content, or the type and parameters of the boiler.
Deaerators are delivered to the site assembled as a whole, without packaging.
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008

Odplyňovač KS 400
Odplyňovač KS 800 – 1000
Odplyňovač KS 1400 – 2500
-
-
-
Deaerator KS 400
Deaerator KS 800 – 1000
Deaerator KS 1400 – 2500
KASPER kovo S.R.O.
TEL.: +420 499 827 111 fax: +420 499 827 115 email: info@kasperkovo.cz
web: www.kasperkovo.cz
address: KASPER KOVO s.r.o.
Žitná 476
CZ-541 03 Trutnov ič: 46508465 dič: CZ46508465 or: Hradec Králové, C/2220 bank: UniCredit Bank Czech Republic, a.s.
čú: 1002430707/2070 iso: EN ISO 9001:2009
EN ISO 14001:2005
EN ISO 18001:2008