3M Telecommunications
Solutions for Networks
Solutions for
Optical
Fibre
Telecommunications
Networks
Product Catalogue
Solutions for
Fibre
Optics
Optical fibres are fibres made of glass which transport a signal containing
several types of information at very high speeds in the form of pulses of light.
This technology allows very high data flows to be achieved, up to several tens of
Gigabits/second.
The use of optical fibre technology allows networks to be fed over long
distances with minimum losses. It also offers the advantage of being insensitive
to electromagnetic interference.
3M offer fibre optic solutions for the main types of networks for the longand short-distance markets:
FTTH : With its extensive experience in FTTH, 3M offers a complete solution
from the fibre optic node (exchange) up to the subscriber point (interior
distribution device).
LAN : The equivalent of the VDI product for copper with RJ45 Keystone jacks,
3M lists a full fibreoptics range for your LAN networks.
Security Video : 3M offers solutions to meet the installation needs of
your Security Video systems. The products can be installed quickly and are easy
to use.
DATACENTER : 3M offers solutions for Meet Me Room (Copper and Fibre).
3
Fibre optic Solutions
FTTX Solutions
Content
Page
Description of the FTTH Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Optical Node . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Transport network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
FTTH access and distribution network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Distribution solutions for buildings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Summary table of splice protection enclosures . . . . . . . . . . . . . . . . . . . 8-9
1 Exchange Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
RFO NG Optical Distribution Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
MODF 19’’ Optical Distribution Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
2 Transport Access Network Solution . . . . . . . . . . . . . . . . . . . . . . . 14-18
BPEO Size 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
BPEO Size 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16
BPEO Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18
3 Distribution Access Network Solutions . . . . . . . . . . . . . . . . . 19-23
3.1 Underground distribution network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-23
BPEO Size 1,5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20
BPEO Size 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22
µQODC (Quick Optic Derivation Closure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.2 Under- and above ground distribution network. . . . . . . . . . 24-26
BPEO Size 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25
OSSC-OSLC-OSC30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3.3 Wall and Pole distribution network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28
PBO Size 1 NG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
FTB (Fibre Terminal Box). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4
Page
4 Solutions for Building Distribution . . . . . . . . . . . . . . . . . . . . . . . . . .29-37
4.1 Building Entry Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
PBO Size 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
eDB² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
4.2 Building Floor Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32
PBPO 24 NG Symetric. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
PBPO/C NG Symetric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.3 Solutions for Living Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-35
Wall Outlet 4 Fibres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-34
Wall Outlet 2 Fibres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4.4 FTTH Wall Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37
3M™ 8686 FTTH Wall Outlet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3M™ VOL-0256-C FTTH Wall Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5 FTTH Connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-47
5.1 NPC Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
3M™ No Polish Connectors (NPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
3M™ No Polish Connector Termination Kit 8865
and 8865-C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3M™ Angle Splicing Kit 2565 for NPC Connectors
and Fibrlok Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.2 Crimplok + Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41
3M™ Crimplok + Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3M™ Crimplok + Terminations Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5.3 Fibrlok™ Mechanical Splices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3M™ Fibrlok™ Mechanical Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.4 Fibrlok™ Indoor FRP Splice Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3M™ 2569 Indoor FRP Splice Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.5 3M™ One Pass Mini Fibre Pathway LSZH . . . . . . . . . . . . . . . . . . . 44-47
3M™ One Pass Mini Fibre Pathway Duct . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3M™ One Pass Mini Fibre Pathway Product Accessories . . . . . . . 47
5
Fibre optic Solutions
FTTX Solutions
Description of the FTTH Network
ON (Optical Node)
The ON is the location which houses the active components for transmission and
switching and which acts as the interface between the collection and access networks.
Optical distribution systems are available for open frames or for 19" racks. The choice
between these two installation options mainly depends on the size of the location.
For a large, shelter-type location the RFO NG solution on open frames is more suitable
for more flexibility during patching. For smaller locations, the MODF solution for
19” racks is the most suitable since it is more compact.
RFO NG solution for frames
MODF solution for 19” racks
Transport network
The transport network, also known as the access network, routes the fibres from the
access node to the street cabinet. High capacity fibre optic cables and splice protection
enclosure are used for this part of the network.
3M offers a full range of splice protection enclosures.
There are four criteria of selection:
- Network configuration: It is essential to know, whether configuration is of MID SPAN,
STRAIGHT JOINT, DERIVATION PONT or DISTRIBUTION TYPE.
The type of configuration involved will determine the front face of the housing.
- The environment: This criteria determines the necessary IP (Protection class) for the
housings. Locations with direct water exposure may need a higher IP class.
- The capacity: This relates to the number and type of splices at the point of connection
- The cables: This relates to cable characteristics such as the diameter, the number of
fibres and the structure.
The 3M range of splice protection units for the transport network
BPEO Size 4
Fibre capacity
Range cable diameter* (mm)
BPEO Size 3
BPEO Size 2
864
576
336
4 to 27
4 to 27
4 to 27
Volume (L)
57.9
23.8
17.3
IP Protection class
IP 68
IP 68
IP 68
* Depending on the configuration (transit or break out). Please refer to the product page for further information.
6
Description of the FTTH Network
FTTH access and distribution network
The access and distribution network includes the section from the street cabinet up
to the the fibre optic distribution point (DP). The street cabinet is a point where the
building operator provides other operators with access to the lines. The fibre optic
distribution point (DP) is the node in the access network architecture from which clients
are connected. Closures protect the jointing points of cables between these two network
locations.
BPEO Size 1.5
Fibre capacity
Range cable diameter* (mm)
BPEO Size 0
µQODC
PBO NG
48
144
144
48
24
3 to 18
3 to 20
3 to 18
4.2 to 11
5.6
4.8
<2
1.4
n.a*
IP 68
IP 68
IP 68
IP 68
IP 44
Volume (L)
IP Protection index
BPEO Size 1
* Depending on the configuration (input or output). Please refer to the product page for further information.
Distribution solution for buildings
Connections in buildings are the final stage in an FTTH network. Fibres located at the
base of a building are distributed and finally connected to subscribers.
There are two types of architecture:
"Direct Drop" architecture (1)
An architecture is said to be "direct
drop" when at floor landings there
are no fibre boxes provided between
the Interior Optical Termination in the
communications board for each of the
dwellings and the operators services
location (or room) at the base of the
building. In this case an individual
"drop" cable links each dwelling to the
operators' services location (or room).
Fibre capacity
Application
Type of housing
Câble de branchement
d'abonné
Prise terminale client
Kit de
raccordement
terrain
FibrlokTM
Prise terminale client
Prise terminale client
Pied d'immeuble
PBO T2
Adduction
de l'immeuble
"Riser cable" architecture (2)
An architecture is said to be a "riser
cable" architecture when at floor
landings, there are floor boxes provided
between the Interior Optical Termination
in the communications board for each
of the dwellings and the operators
services location (or room) at the base
of the building. In this case a riser cable
links the operators' services location
(or room) to all the boxes on a floor
landing.
Câble de distribution
verticale ou câble "riser"
Kit de raccordement
terrain FibrlokTM
Kit de prise
pré-câblée 4FO
Boîtier
de distribution
de palier
Tous les 1 à
2 étages
PBPO 12/24
Kit de prise
pré-câblée 4FO
Kit de
raccordement
terrain FibrlokTM
Kit de prise
pré-câblée 4FO
Pied d'immeuble /
Point de distribution
PBPO 12/24
Adduction
de l'immeuble
PBO T2 V2
eDB²
PBPO 24
NG Symmetric
PBPO/C
NG Symmetric
Wall Outlet
144
48
48
48
4
Building basement
Building basement
Floor
Floor
Inside Living Unit
Splice
Suitable for
connectors
Splice
Suitable for
connectors
Suitable for
connectors
7
Fibre optic Solutions
FTTX Solutions
Summary table of splice protection enclosures
Splice protection enclosure
Description
BPEO Size 0 4-slot
BPEO Size 1 EOC 12-slot
BPEO Size 1 EVOL CDP
12-slot
BPEO Size 1 EVOL EDP
12-slot
BPEO Size 1 EVOL FDP BRANCH
12-slot
BPEO Size 1 EVOL FDP DROP
12-slot
BPEO Size 1.5 EVOL FDP BRANCH
12-slot
BPEO Size 1.5 EVOL FDP DROP
12-slot
8
Reference
Number
N501741A
N501487A
N501488A
N501489A
N501719A
N501714A
N501747A
N501751A
BPEO Size 2 EVOL CDP
28-slot
N501491A
BPEO Size 2 EVOL EDP
28-slot
N501492A
BPEO Size 2 EVOL BDP
28-slot
N501493A
BPEO Size 3 EVOL CDP
48-slot
N501494A
BPEO Size 3 EVOL EDP
48-slot
N501495A
BPEO Size 3 EVOL BDP
48-slot
N501496A
BPEO Size 4
72-slot
N501675A
Cable entry kit
Description
Max No. of cable
entries
Reference
Number
ECAM Body Double D6 - 18 (from 6 to 18 mm)
Cable Entry Kit for D6 - 18 - from 6 to 9 mm
Cable Entry Kit for D6 - 18 - from 9 to 12 mm
Cable Entry Kit for D6 - 18 - from 12 to 15 mm
Cable Entry Kit for D6 - 18 - from 15 to 18 mm
1
-
N721162A
N721163A
N721164A
N721165A
N721166A
ECAM Single S3 - 7 (from 3 to 7 mm)
ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm)
12
2
N721171A
N721172A
ECAM Single EVOL S5 - 18 (from 5 to 18 mm)
4
N530129A
ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)
ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)
ECAM Body Double D6 - 18 (from 6 to 18 mm)
Cable Entry Kit for D6 - 18 - from 6 to 9 mm
Cable Entry Kit for D6 - 18 - from 9 to 12 mm
Cable Entry Kit for D6 - 18 - from 12 to 15 mm
Cable Entry Kit for D6 - 18 - from 15 to 18 mm
1
2
1
4
1
-
N721130A
N530129A
N721130A
N530128A
N721162A
N721163A
N721164A
N721165A
N721166A
ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm)
ECAM Body Double D6 - 18 (from 6 to 18 mm)
Cable Entry Kit for D6 - 18 - from 6 to 9 mm
Cable Entry Kit for D6 - 18 - from 9 to 12 mm
Cable Entry Kit for D6 - 18 - from 12 to 15 mm
Cable Entry Kit for D6 - 18 - from 15 to 18 mm
10
1
-
N721172A
N721162A
N721163A
N721164A
N721165A
N721166A
ECAM Single S3 - 7 (from 3 to 7 mm)
16
N721171A
ECAM Body Double D6 - 18 (from 6 to 18 mm)
Cable Entry Kit for D6 - 18 - from 6 to 9 mm
Cable Entry Kit for D6 - 18 - from 9 to 12 mm
Cable Entry Kit for D6 - 18 - from 12 to 15 mm
Cable Entry Kit for D6 - 18 - from 15 to 18 mm
1
-
N721162A
N721163A
N721164A
N721165A
N721166A
ECAM Single S3.5 - 9.5 (from 3.5 to 9.5 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)
ECAM Body Double D6 - 18 (from 6 to 18 mm)
Cable Entry Kit for D6 - 18 - from 6 to 9 mm
Cable Entry Kit for D6 - 18 - from 9 to 12 mm
Cable Entry Kit for D6 - 18 - from 12 to 15 mm
Cable Entry Kit for D6 - 18 - from 15 to 18 mm
13
2
1
-
N721172A
N530129A
N721162A
N721163A
N721164A
N721165A
N721166A
ECAM Single S3 - 7 (from 3 to 7 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)
25
2
N721171A
N530128A
ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)
ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)
ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)
1
6
1
10
2
1
16
N721131A
N530129A
N721131A
N530128A
N530129A
N721130A
N530128A
ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)
ECAM Double D5 - 27 (from 5 to 27 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)
ECAM Single S5 - 18 (from 5 to 18 mm)
ECAM Double D5 - 20 (from 5 to 20 mm)
ECAM Single S4 - 12 (from 4 to 12 mm)
1
6
1
10
2
1
16
N721131A
N530129A
N721131A
N530128A
N530129A
N721130A
N530128A
ECAM Double D5 - 27 (from 4 to 27 mm)
ECAM Single S4 - 27 (from 4 to 27 mm)
1
5
N501790A
N501791A
Splice protection
housing
Description
BPEO Size 0 4-slot
Reference
Number
Cassettes
Max No. of.
cassettes
Compatibility
Wall
support
Reference
Number
Support
molded into
4 x cassettes 1-step
N501741A
All part numbers
the housing
2 x cassettes 2-step
base
BPEO Size 1 EOC
12 x cassettes 1-step
N501487A
All part numbers N711599A
12-slot
6 x cassettes 2-step
BPEO Size 1 EVOL CDP
12 x cassettes 1-step
N501488A
All part numbers N711599A
12-slot
6 x cassettes 2-step
BPEO Size 1 EVOL EDP
12 x cassettes 1-step
N501489A
All part numbers N711599A
12-slot
6 x cassettes 2-step
BPEO Size 1 EVOL
FDP BRANCH 12-slot
BPEO Size 1 EVOL
FDP DROP 12-slot
N501719A
N501714A
12 x cassettes 1-step
All part numbers N711599A
6 x cassettes 2-step
12 x cassettes 1-step
All part numbers N711599A
6 x cassettes 2-step
Description
Cassettes FO G652 / G657
Number Reference
of slots Number
K7 - 1 support 12 x fusion splices
1
N541106A
K7 - 1 support 2 x 6 fusion splices
1
N541182A
K7 - 1 support 9 x fusion splices and 1 x splitter
1
N541113A
K7 - 1 support 6 x Fibrlok 2540G
1
N541103A
K7 - 1 support and 2 splitters x 6 fusion splices
1
N541155A
K7 - 2 supports 12 x fusion splices or 12 Fibrolk
2540G
K7 - 2 supports 12 x fusion splices and
1 x splitter
K7 - 2 supports 24 x fusion splices and
1 x splitter
2
N541121A
2
N541104A
2
N541151A
K7 - 2 supports 12 x Fibrlok™ 2540G
2
N541108A
K7 - 2 supports 10 x Fibrlok™ 2540G and
1 x splitter
2
N541110A
™
To obtain the number of cassettes for a given type of closure
simply read the number of slots that the organiser contains and
the number of slots occupied by a cassette.
Example:
BPEO S1 is a 12-slot organiser 12 x 12 fusion cassettes (541106)
can be housed or 6 x 12 Fibrlok™ 2540G cassettes (541108).
BPEO Size 1.5 EVOL FDP
Support built
12 x cassettes 1-step
BRANCH
N501747A
All part numbers into the body
6 x cassettes 2-step
12-slot
of the housing
BPEO Size 1.5 EVOL
FDP DROP 12-slot
N501751A
Support built
12 x cassettes 1-step
All part numbers into the body
6 x cassettes 2-step
of the housing
BPEO Size 2 EVOL CDP
28 x cassettes 1-step
N501491A
All part numbers N711600A
28-slot
14 x cassettes 2-step
BPEO Size 2 EVOL EDP
28 x cassettes 1-step
N501492A
All part numbers N711600A
28-slot
14 x cassettes 2-step
BPEO Size 2 EVOL BDP
28 x cassettes 1-step
N501493A
All part numbers N711600A
28-step
14 x cassettes 2 Step
BPEO Size 3 EVOL CDP
48 x cassettes 1-step
N501494A
All part numbers N711600A
48-slot
24 x cassettes 2 Step
BPEO Size 3 EVOL EDP
48 x cassettes 1-step
N501495A
All part numbers N711600A
48-step
24 x cassettes 2-step
BPEO Size 3 EVOL BDP
48 x cassettes 1-step
N501496A
All part numbers N711600A
48-step
24 x cassettes 2-step
BPEO Size 4
72-slot
N501675A
72 x cassettes 1-step
All part numbers N711660A
36 x cassettes 2-step
9
Fibre optic Solutions
FTTX Solutions
1 Exchange Solutions
RFO NG Optical Distribution Frame
> Description
The RFO NG is the new generation end-of-cable, connection modules and tray modules
for exchange optical distribution units
It is used for fibre distribution patchcord management on frames.
RFO NG exists in 12- or 6-drawers block with respective fibre capacities of
144 and 72 fibres.
Technical Information
Dimensions
Cable-head fitted with modules
RFO NG installer training
Height
Width
Depth
12-drawer chassis
258 mm
290 mm
260 mm
6-drawer chassis
126 mm
290 mm
260 mm
Connection modules
Height
Width
Depth
18 mm
160 mm
185 mm
Weight
12-drawer chassis
4.96 kg
6-drawer chassis
2.42 kg
Materials
3M Télécommunications offers free training to
allow you to take on projects with confidence.
Simply contact your area sales contact.
Training objectives:
Installing an optical distribution frame (ODF) from
the RFO NG range.
Content:
• Installing an ODF in an exchange or a specific
network
• Connecting an ODF to the network
• Creating a client link between equipment and
the network
Duration: 2 hours
Location: 3M location or directly on site
10
Cable-head:
Steel. Colour Ivory
Modules:
Plastic. Colour Black
Connectivity:
In standard type SC/APC, LC/APC or SC/UPC
Pigtails:
Semi-tight structure 900 µm, single-mode fibres G652D and G657 A2 and
multimode fibre OM3
Splices:
Fusion-type splice support. Other types - please contact us
RFO NG capacity depending on frames
12-drawer chassis
2.00 m Frame
2.50 m Frame
3.25 m Frame
Capacity
6
8
11
Number of ports
864
1152
1584
6-drawer chassis
Capacity
12
16
22
Number of ports
864
1152
1584
1 Exchange Solutions
Composition of the RFO NG system
DEECAM Break-out module
Cable inlet through top or bottom
For spreading out cable in 12-fibre tubes for
feeding modules (12 fibres per module)
Frames
Chassis
For mounting chassis
6- or 12 drawers, for coiling
of tubes and fixing of
Entry/Output tray modules of jumpers
on the left using a comb
Jumper management using rings
Module
Corner pieces for fixing the frame
provides links as splices between
the cable fibres and jumpers.
Ordering Information
Description
RFO NG - 12-drawer chassis 144 fibres (without module)
RFO NG - 6-drawer chassis 72 fibres (without module)
Description
RFO NG - Pre wired module 12 SC/APC G652D
RFO NG - Pre wired module 12 SC/UPC G652D
RFO NG - Pre wired module 12 SC Multi-mode OM3
RFO NG Symetric - Prewired Module 12 SC/APC G652
Protective patchcord holder for RFO NG symetric tray
Reference No.
MOQ
N711747A
N711748A
1
1
Reference No.
MOQ
N541133A
N541181A
N541199A
N541193A
N671317A
12
12
12
12
12
Reference No.
MOQ
N801585A
N801595A
N801584A
1
1
1
Reference No.
MOQ
N581203A
N581207A
1
1
Reference No.
MOQ
N711547A
N711597A
1
1
For other variations of RFO NG modules, please contact your local 3M representative.
Description
RFO NG - Frame 2.00 m - 6 levels
RFO NG - Frame 2.50 m - 8 levels
RFO NG - Frame 3.25 m - 11 levels
Description
RFO NG - 1000 m reel of tube D5/3
RFO NG - 25 m reel of tube D5/3
Description
RFO NG - Breakout Housing DEECAM D18 for 24 D5/3
RFO NG - Breakout Housing DEECAM D25 for 60 D5/3
11
Fibre optic Solutions
FTTX Solutions
1 Exchange Solutions
MODF 19” Optical Distribution Unit
> The MODF 2K 19” range
The 3M MODF is the benchmark in terms of equipment connection on 19" racks.
This distribution unit offers a high capacity of 144 fibres per 3U chassis.
The MODF also allows scalable equipment of the chassis and is equipped with
a 1U guide panel for jumpers with bending radius being secured.
Characteristics
Advantages
Capacity: 144 fibres
• Compact connection module
Height : 3U
• Double sided stowage zone cassette for
separation of non-sleeved fibres and pigtails
• Compact with 144 connexions on only 3U
(19” Rack)
Optical distributor for 19” rack
• Complete system
• Easy to install
• Can be extended at any time
• Coordination of jumper paths and preservation
of minimum bending radius
• Coil stowage of excess lengths of fibres
Ordering Information
19" chassis:
• Height 3 U and usable width 84 units (84 HP/TE)
• Allows mounting of 12 MODF 2K modules (width 7 units)
• Content: Aluminium, chassis, pre-assembled, incl. 12 sets of guides for MODF modules
• Standard layout compatible with 2K modules of width 7
• Dimensions: 135 x 485 x 190 mm (H x W x D)
• Weight: 1.3 kg
Description
Reference No.
MOQ
MODF 2K-19" chassis, 3U
40026-515 30
1
19”, 1U Tray, Access Fibre Tray:
• To be placed beneath the 3U chassis to stow coils of excess lengths of cable tubes.
• Access from the rear removable compartment.
• Content:
- Pre-assembled with fitting accessories
- Dimensions: 44 x 483 x 280 mm (H x W x D)
- Weight: 1.9 kg
12
Description
Reference No.
MOQ
MODF 2K-Tray 19”, 1U, Access Fibre Tray
40040-502 30
1
1 Exchange Solutions
Ordering Information
Patchcord Management Tray, 19”, 1U:
• 1U drawer to be fixed beneath the chassis to manage the input and outputs of jumpers
• Left or right inputs, guides to secure bending radius requirements
• Content:
- Pre-assembled with 6 guides and mounting accessories
- Dimensions: 73 x 485 x 100 mm - weight: 1.1 kg
Description
Reference No.
MOQ
MODF2K-Patchcord Management Tray, 19", 1U
40036-521 30
1
MODF 2K/7 TE - Connection and splicing modules for 19" chassis:
• Coupling modules 2K-7TE (35 mm width) pre wired with 12 connections and 12 pigtails
• All ends of pigtails are prepared for splicing and colour identified
• Storage of excess lengths of pigtails and splices in separate cassettes
• The ANT splice protections, heat-shrink splice protections and their supports are available as accessories
• Capability of mounting 12 x 2K/7TE modules per chassis. Other 2K modules on demand
Description
Reference No.
MOQ
Module 2K/7TE-SM-SC/APC G652D
Module 2K/7TE-SM-SC G652D
40395-514 45
40395-546 45
1
1
Description
Reference No.
MOQ
Splice module 2K/8TE-24 splices:
40395-517 30
1
Description
Reference No.
MOQ
Cover 3U, 7TE
40018-018 30
25
For other variations of 2k modules, please contact your local 3M representative.
Splice module 2K/8TE - 24 splices:
• Splice module with 2 splice cassettes.
• Dimensions: 128 x 40 x 215 mm (H x W x D)
Cover 3U, 7TE:
• To close unused locations in the rack
13
Fibre optic Solutions
FTTX Solutions
2 Transport Access Network Solutions
BPEO Size 4
> Description
The Dome Closure BPEO Size 4 fibre-optic splice protection is IP68 watertight.
It is used to protect splices in underground or overhead installations with the capability
of being fixed horizontally or vertically in a manhole.
The FDC 12S meets high fibre-capacity requirements; up to 864.
A
A - Valves
B - Closures
C - Hooks
D - Dual port ECAM D4-27
E - 5 single port ECAM S4-27
F - Earthing kit
G - Closures
B
C
B
F
B
E
D
G
The BPEO Size 4 can be equipped with a dual ECAM D4-27 and 5 single ECAM S4-27. These entries allow
micro-sleeve cables to be introduced with a maximum diameter of 27 mm.
Characteristics
Advantages
Volumes: 57.9L
• Fully mechanical closure
• No flame, no energy source required
Cable diameters: 4 to 27 mm
• 5 Individual entries + 1 double entry
Configurations:
- 1 Double port for ECAM D4-27
- 5 Single ports for ECAM S4-27
• Use of 2 cassette organisers
• Allows 1 cable to be connected in mid span
access and/or up to 5 branched cables
Max capacity: 864 Fibres
Perfect for 720-fibre cables
• For high-capacity coiling and stowage of cable
micro-structures or loose tubes
• High capacity cassette organisers
• Supplied without cassettes and without
cable entries
• Can be used to connect 720 / 864 fibres
• Capable of using all the cassettes in the BPEO
Technical Information
Dimensions in mm (L x H) :
658 x 335
Cable entry ports and dimensions
Single entry ports:
5 for cables of diameter 4 to 27 mm
Double oval entry port:
1 double port for cables of diameter 4 to 27 mm
Maximum number of fusion splices:
864 fibres
Cassette:
N541106A (cassette for 12 fusion splices)
Base material:
Plastic
Closure system:
Steel lock
Pressure flash test:
280 mbar
Ordering Information
14
Description
BPEO Size 4 Dome Sleeve
BPEO Size 4 - Dome Sleeve for 864 FO max One double entry D4 - 27 + 5 x single entries D4 - 27
Reference No.
MOQ
N501675A
1
Description
Reference No.
MOQ
ECAM
ECAM Double D4-27 for BPEO Size 4 - One double entry D4 - 27
ECAM-27MM-D
1
ECAM Single S4-27 for BPEO Size 4 - One single entry D4 - 27
ECAM-27MM-S
1
Description
Support
Wall support
Reference No.
MOQ
N711660A
1
2 Transport Access Network Solutions
BPEO Size 3
> Description
The BPEO size 3 is an IP 68 watertight splice protection closure which allows the
splicing of up to 288 each Fibrlok™ 2540-G mechanical splices or 576 each
fusion splices.
The BPEO size 3 organiser is a 48-slot unit. Transit fibres in uncut loose tubes or
micro tubes can be stored behind the cassette support.
Characteristics
Advantages
Volumes: 23.8L
• Sealed closure opened using latches
• Simplified opening/closure
Cable diameters: 4 to 27 mm
• ECAM type cable entries
• No flame, no resin for preparation of entries
Configurations:
- CDP (primary branch)
- EDP (secondary branch)
- BDP (distribution)
• Organiser with three management zones
• ECAM preparation outside the housing
• Storage of tubes, modules or bare fibres
in lower part of the organiser
• Storage / protection on a genuine plate
• 48 slot organiser for swivel mounted cassettes
• Ability to mix cassettes on the same organiser
• Side channels for fibres to pass through
• Easy access to fibres
• Plugs on all inlet ports and test valves as
standard
• Watertighness is confirmed for each closure
after assembly
Max capacity: 576 Fibres
• Cassettes for storing fibres in 250 µm structure
Technical Information
Sealing:
IP68
Impact:
Resistance at 20 Joules (IK10)
Tensile:
Tested at 100 daN on cable
Dimensions (in mm) :
Length
Width
661
341
Housing only
149
Depth
Wall mounted
154
Post/wall
178
Underground
149
Number of slots in the organiser: 48
Configurations of BPEO Size 3
Joint Droit EOC
Primary branch CDP
Secondary branch EDP
Joint Droit EOC
Distribution BDP
Dérivation primaire CDP
Dérivation primaire CDP
Dérivation secondaire EDP
- 6 single ports for ECAM S5-18
- 1 double port for ECAM D5-27Dérivation
or
secondaire EDP
2 single ports for ECAM S5-18
Branchement FDP
- 10 single ports for ECAM S4-12
- 2 single ports for ECAM S5-18
- 1 double port for ECAM D5-27 or
2 single ports for ECAM S5-18
- 16 single ports for ECAM S4-12
- 1 double port for ECAM D5-20 or
2 single ports for ECAM S4-12
Key:
Branchement FDP
Single port for ECAM S5-18
Double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Single port for ECAM S4-12
Double port for ECAM D5-20 or 2 single ports for ECAM S4-12
15
Fibre optic Solutions
FTTX Solutions
2 Transport Access Network Solutions
Ordering Information
Description
Reference No. MOQ
BPEO Size 3
BPEO-3 EVOL CDP 48 SLOT
Splice protection closure CDP
N501494A
1
BPEO-3 EVOL EDP 48 SLOT
Splice protection closure EDP
N501495A
1
BPEO-3 EVOL BDP 48 SLOT
Splice protection closure BDP
N501496A
1
Description
Reference No. MOQ
ECAM Double and Single
ECAM Single S4-12
Single cable entry kit with diameter from 4 to 12 mm
N721126A
10
ECAM Single S5-18
Single cable entry kit with diameter from 5 to 18 mm
N721127A
10
ECAM Double D5-20
Double cable entry kit with diameter from 5 to 20 mm
N721130A
5
ECAM Double D5-27
Double cable entry kit with diameter from 5 to 27 mm
N721131A
5
Description
Reference No. MOQ
ECAM Extended (Multi-entry)
N721140A
10
ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables
(works for 6 x 6 mm)
N721141A
10
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables
N721142A
N721146A
10
10
ECAM Extended S12 - 12 x 1.5 mm for 12 x 1.5 mm cables
ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables
Extended ECAMs allow several cables to be inserted in entries.
Description
Reference No. MOQ
BPEO Cassettes
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion
splices and PLC splitter
N541104A
10
K7-2SLOT-Universal for 12 heat shrink fusion splices
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok™ 2540-G
mechanical splices
N541103A
20
K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok™ 2540-G
mechanical splices
N541108A
10
K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea
Fibrlok™ 2540-G mechanical splices
N541110A
10
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
™
Description
Fixing support and adaptor kit
N711440A
5
BPEO Sewer type mounting kit sizes 2 and 3
N711546A
5
BPEO Wall mounting kit V2 for BPEO sizes 2 and 3
N711600A
5
Coupling holder 6 x SC connectors for BPEO S1, S2, S3
(supplied without connectors)
N711604A
20
Coupling holder 12 x SC connectors for BPEO S2, S3
(supplied without connectors)
N711605A
20
Earthing kit for BPE/O*
N151064A
10
BPEO Wall or Pole mounting kit BPEO sizes 2 and 3
* Not compatible with supports 711440/711438
16
Reference No. MOQ
2 Transport Access Network Solutions
BPEO Size 2
> Description
The BPEO Size 2 is a watertight splice protection closure which allows splicing of up
to 168 each Fibrlok™ 2540-G mechanical splices or 336 each fusion splices.
The size 2 organiser is a 28 slot unit. Transit fibres in uncut loose tubes or micro tubes
can be stored behind the cassette support.
Max capacity: 336 Fibres
Volumes: 17.3L
Cable diameters: 4 to 27 mm
Configurations:
- CDP (primary branch)
- EDP (secondary branch)
- BDP (distribution)
Characteristics
Advantages
• Sealed closure opened using latches
• Simplified opening/closure
• ECAM type cable entries
• No flame, no resin for preparation of inlets
• Organiser with three management zones
• ECAM preparation outside the housing
• Storage of tubes, modules or bare fibres
in lower part of the organiser
• Storage / protection on a genuine plate
• 28 slot organiser for swivel mounted cassettes
• Ability to mix cassettes on the same organiser
• Side channels for fibres to pass through
• Easy access to fibres
• Plugs on all inlet ports and test valves as
standard
• Watertighness is confirmed for each closure
after assembly
• Cassettes for storing fibres in 250 µm structure
Technical Information
Sealing:
IP68
Impact:
Resistance at 20 Joules (IK10)
Tensile:
Tested at 100 daN on cable
Dimensions (in mm) :
Length
Width
520
341
Depth
Housing only
149
Wall mounted
154
Post/wall
178
Channel
149
Number of slots in the organiser: 28
Configurations of BPEO Size 2
Primary branch
CDP
Joint
Droit EOC
Secondary branch EDP
Distribution BDP
Joint Droit EOC
Dérivation primaire CDP
Dérivation primaire CDP
- 6 single ports for ECAM S5-18
- 1 double port for ECAM D5-27 or
Dérivation secondaire EDP
2 single ports for ECAM S5-18
Dérivation secondaire EDP
Branchement FDP
- 10 single ports for ECAM S4-12
- 2 single ports for ECAM S5-18
- 1 double port for ECAM D5-27 or
2 single ports for ECAM S5-18
- 16 single ports for ECAM S4-12
- 1 double port for ECAM D5-20 or
2 single ports for ECAM S4-12
Key:
Branchement FDP
Single port for ECAM S5-18
Double port for ECAM D5-27 or 2 single ports ECAM S5-18
Single port for ECAM S4-12
Double port for ECAM D5-20 or 2 single ports ECAM S4-12
17
Fibre optic Solutions
FTTX Solutions
2 Transport Access Network Solutions
Ordering Information
Description
Reference No. MOQ
BPEO Size 2
BPEO-2 EVOL CDP 28 SLOT
Splice protection housing CDP
N501491A
1
BPEO-2 EVOL EDP 28 SLOT
Splice protection housing EDP
N501492A
1
BPEO-2 EVOL BDP 28 SLOT
Splice protection housing BDP
N501493A
1
Colour code for compatibility between front faces BPEO (CDP, EDP and BDP) and ECAM versions
Description
Reference No. MOQ
ECAM Double and Single
ECAM Single S4-12
Single cable entry kit with diameter from 4 to 12 mm
N721126A
10
ECAM Single S5-18
Single cable entry kit with diameter from 5 to 18 mm
N721127A
10
ECAM Double D5-20
Double cable entry kit with diameter from 5 to 20 mm
N721130A
5
ECAM Double D5-27
Double cable entry kit with diameter from 5 to 27 mm
N721131A
5
Description
Reference No. MOQ
ECAM Extended (Multi-entry)
N721140A
10
ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables
(works for 6 x 6 mm)
N721141A
10
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables
N721142A
N721146A
10
10
ECAM Extended S12 - 12 x 1.5 mm for 12 x 1.5 mm cables
ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables
Extended ECAMs allow several cables to be inserted in entries.
Description
Reference No. MOQ
BPEO Cassettes
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion
splices and PLC splitter
N541104A
10
K7-2SLOT-Universal for 12 heat shrink fusion splices
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok™ 2540-G
mechanical splices
N541103A
20
K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok™ 2540-G
mechanical splices
N541108A
10
K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea
Fibrlok™ 2540-G mechanical splices
N541110A
10
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
™
Description
Fixing support and adaptor kit
N711440A
5
BPEO Sewer type mounting kit sizes 2 and 3
N711546A
5
BPEO Wall mounting kit V2 for BPEO sizes 2 and 3
N711600A
5
Coupling holder 6 x SC connectors for BPEO S1, S2, S3
(supplied without connectors)
N711604A
20
Coupling holder 12 x SC connectors for BPEO S2, S3
(supplied without connectors)
N711605A
20
Earthing kit for BPE/O*
N151064A
10
BPEO Wall or Pole mounting kit BPEO sizes 2 and 3
* Not compatible with supports 711440/711438
18
Reference No. MOQ
3 Distribution Access Network Solutions
3.1 Underground distribution network
BPEO Size 1.5
The BPEO Size 1.5 is an IP68 watertight splice protection closure which allows splicing
of 72 each Fibrlok™ 2540-G mechanical splices or 144 each fusion splices.
Despite remaining compact this new BPEO now provides a genuine distribution node
between the street cabinet and all distribution points.
Max capacity: 144 Fibres
Characteristics
Advantages
Volumes: 5.6L
• Watertight closure opened using latches
• Simplified opening/closure
Cable diameters: 3.5 to 18 mm
• ECAM type cable entries
• No flame, no resin for preparation of inlets
Height which allows easy storage
and management of excess lengths
• Organiser with three management zones
• ECAM preparation outside the housing
• Storage of tubes, modules or bare fibres
in lower part of the organiser
• Storage / protection on a genuine plateau
• 12 slot organiser for swivel mounted cassettes
• Ability to mix cassettes on the same organiser
• Side channels for fibres to pass through
• Easy access to fibres
• Plugs on all inlet ports and test valves
as standard
• Watertighness is confirmed for each closure
after assembly
Wall support built into the body
of the housing
• Cassettes for storing fibres in 250 µm structure
Technical Information
Sealing:
IP68
Impact tests:
Resistant at 20 Joules (IK10)
Cable pull-out retention force:
Tested at 100 daN on cable
Dimensions (in mm) :
Length
382
Colour
Black
Material
Thermoplastic
Splicing capacity
144 fibres (12 cassettes à 12 heat shrink
fusion splices 45 or 60 mm)
Width
204
Depth
120
Configuration of BPEO Size 1.5
FDP Branch
FDP Drops
• 1 double port for Double ECAM D6-18
or 2 Single ECAM S4-12
• 1 double port for Double ECAM D6-18
or 2 Single ports S4-12
• 13 single ports for Single ECAMs S3.5-9.5
• 25 single ports for Single ECAMs S3-7
• 2 single ports for Single ECAMs S5-18
• 2 single ports for Single ECAMs S4-12
19
Fibre optic Solutions
FTTX Solutions
3 Distribution Access Network Solutions
Ordering Information
Description
Reference No.
MOQ
N501747A
1
N501751A
1
Reference No.
MOQ
Double D6-18 ECAM for cable entry kit
Body for housing double cable entry kits
N721162A
10
ECAM Double D6-9 mm
Sealing kit with diameter from 6 to 9 mm
N721163A
10
ECAM Double D9-12 mm
Sealing kit with diameter from 9 to 12 mm
N721164A
10
ECAM Double D12-15 mm
Sealing kit with diameter from 12 to 15 mm
N721165A
10
ECAM Double D15 to 18 mm
Sealing kit with diameter from 15 to 18 mm
N721166A
10
ECAM Double D18 - 4,5/6 for cable entry kit
Body for housing double cable entry kits
N721162B
10
ECAM Double D4,5/6 mm
Sealing kit with diameter from 4,5 to 6 mm
N721176A
10
BPEO Size 1.5
BPEO - 1.5 FDP Branch
BPEO - 1.5 FDP Drops
Colour code for compatibility between front faces BPEO and ECAM versions
Description
Double ECAM
For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending on the
diameter of cable required (from 6 to 18 mm).
Description
Reference No.
MOQ
Single ECAM S3-7
Single cable entry kit with diameter from 3 to 7 mm
N721171A
100
Single ECAM S3.5-9.5
Single cable entry kit with diameter from 3.5 to 9.5 mm
N721172A
60
Single ECAM S4-12
Single cable entry kit with diameter from 4 to 12 mm
N721126A
10
Single ECAM S5-18
Single cable entry kit with diameter from 5 to 18 mm
N721129A
10
Reference No.
MOQ
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support
12 fusion splices
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for
12 fusion splices and PLC splitter
N541104A
10
K7-2SLOT-Universal for 12 heat shrink fusion splices
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped
with a support for 6ea Fibrlok™ 2540-G mechanical splices
N541103A
20
K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped
with a support for 12ea Fibrlok™ 2540-G mechanical splices
N541108A
10
K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped
with a support for 10ea Fibrlok™ 2540-G mechanical splices
N541110A
10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fibre G657
(lot of 12 pcs)
N541182A
1
Single ECAM
Description
BPEO Cassettes
™
™
20
3 Distribution Access Network Solutions
BPEO Size 1
The BPEO Size 1 is a watertight splice protection closure which allows splicing of up to
72 each Fibrlok™ 2540-G mechanical splices or 144 each fusion splices.
The organiser is a 12 slots unit as micro-structures mid span access and 8 slots as
loose tubes mid span access.
Characteristics
Advantages
• Watertight closure opened using latches
• Simplified opening/closure
• ECAM type cable entries
• No flame, no resin for preparation of inlets
• Organiser with three management zones
• ECAM preparation outside the housing
Volumes: 4.8L
• Storage of tubes, modules or bare fibres
in lower part of the organiser
• Storage / protection on a genuine plateau
Cable diameters: 3 to 20 mm
• 12 slot organiser for swivel mounted cassettes
• Ability to mix cassettes on the same organiser
Configurations:
- EOC (Straight joint)
- CDP (Primary branch)
- EDP (Branch)
- FDP (Branch)
- FDP (Drops)
• Side channels for fibres to pass through
• Easy access to fibres
• Plugs on all inlet ports and test valves
as standard
• Watertighness is confirmed for each closure
after assembly
Max capacity: 144 Fibres
• Cassettes for storing fibres in 250 µm structure
Technical Information
Sealing:
IP68
Impact:
Resistance at 20 Joules (IK10)
Tensile:
Tested at 100 daN on cable
Dimensions (in mm) :
Length
Width
382
204
Housing only
92
Depth
Wall mounted
97
Pole mounted
128
Channel
97
Number of slots: 12
Joint Droit EOC
EOC Straight Joint
Configurations of BPEO Size 1
Joint Droit EOC
Primary branch CDP
EDP Branch
Dérivation primaire CDP
Dérivation primaire CDP
Dérivation secondaire EDP
4 single ports for ECAM S5-18 Dérivation secondaire EDP
Branchement FDP
- 2 single ports for ECAM S5-18
- 1 double port D5-20 or 2 single ports for
ECAM S4-12
- 4 single ports for ECAM S4-12
- 1 double port for ECAM D5-20 or 2 single ports for
ECAM S4-12
Key:
Branchement FDP
Single port for ECAM S5-18
Double port for ECAM D5-27 or 2 single ports for ECAM S5-18
Single port for ECAM S4-12
Double port for ECAM D5-20 or 2 single ports for ECAM S4-12
New configurations
FDP Branch
FDP Drops
21
Fibre optic Solutions
FTTX Solutions
3 Distribution Access Network Solutions
Ordering Information
Description – BPEO Size 1
BPEO - 1 Evol EOC
BPEO - 1 Evol CDP
BPEO - 1 EDP
BPEO - 1 FDP Branch
BPEO - 1 FDP Drops
Reference No.
N501487A
N501488A
N501489A
N501719B
N501714A
MOQ
1
1
1
1
1
Colour code for compatibility between front faces BPEO and ECAM versions
Description – Double ECAM
Reference No.
MOQ
Double D6-18 ECAM for cable entry kit
Body for housing double cable entry kits
N721162A
10
ECAM Double D6-9 mm
Sealing kit with diameter from 6 to 9 mm
N721163A
10
ECAM Double D9-12 mm
Sealing kit with diameter from 9 to 12 mm
N721164A
10
ECAM Double D12-15 mm
Sealing kit with diameter from 12 to 15 mm
N721165A
10
ECAM Double D15 to 18 mm
Sealing kit with diameter from 15 to 18 mm
N721166A
10
ECAM Double D5-20
Double cable entry kit with diameter from 5 to 20 mm
N721130A
5
For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending on
the diameter of cable required (from 6 to 18 mm).
Description – Single ECAM Evolution
Reference No.
MOQ
Single ECAM S3-7
Single cable entry kit with diameter from 3 to 7 mm
N721171A
100
Single ECAM S3.5-9.5
Single cable entry kit with diameter from 3.5 to 9.5 mm
N721172A
60
ECAM Single S4-12 Single cable
entry kit with diameter from 4 to 12 mm
N721126A
10
ECAM Single S5-18 - Single cable entry kit
with diameter from 5 to 18 mm
N721127A
10
Reference No.
N721140A
MOQ
10
ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables
(works for 6 x 6 mm)
N721141A
10
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables
N721142A
N721146A
10
10
Description – ECAM Extended (Multi-entry)
ECAM Extended S12 - 12 x 1.5 mm for 12 x 1.5 mm cables
ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables
Extended ECAMs allow several cables to be inserted in entries
Description – BPEO Cassettes
Reference No.
MOQ
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for
12 fusion splices and PLC splitter
N541104A
10
K7-2SLOT-Universal for 12 heat shrink fusion splices
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped
with a support for 6ea Fibrlok™ 2540-G mechanical splices
N541103A
20
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped
with a support for 12ea Fibrlok™ 2540-G mechanical splices
N541108A
10
K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette
equipped with a support for 10ea Fibrlok™ 2540-G mechanical splices
N541110A
10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fibre G657
(lot of 12 pcs)
N541182A
1
™
Description – Fixing support and adaptor kit
22
Reference No.
MOQ
BPE/O Pole 1 Wall or Pole mounting kit BPEO size 1
N711438A
5
BPE/O Wall and post mounting kit V2 for BPEO size 1
N711599A
5
Coupling holder 6 x SC connectors for BPEO S1, S2, S3
(supplied without connectors)
N711604A
20
Coupling holder 12 x SC connectors for BPEO S2, S3
(supplied without connectors)
N711605A
20
3 Distribution Access Network Solutions
µQODC (Quick Optic Derivation Closure )
The µQODC micro-sleeve is an in line watertight splice protection closure designed for
networks connecting subscribers using fibre optics.
The housing, whose volume is less than 2 dm3 is designed to be installed in small L1T
type chambers.
Ideal derivations on tubes or splicing on micro cables from window cut or mid span
access feeder for FTTH networks.
Max capacity: 24 Fibres
Volumes: 1L
Cable diameters: 4.2 to 11 mm
Configuration:
1 main cable diam. 11 mm
or micro-cable diam. 4.2 mm
Branch of 2 tubes of diam. 3.3/5 mm or 2 cables
of 4/6 mm or 8 cables of 2.5/3.5 mm
Compatible only with single-mode fibres
with small radii of curvature G657A2
Characteristics
Advantages
• Compact
• Less than 2 dm3 for installation in L1T chamber
• Sealed and mechanical closure
• No flame, no resin
No special tools
• Extraction with or without splices, derivations,
looping of cables
• Micro module-cable compatible
• A single product for the various distribution
configurations
• Up to 24 splices and 1 PLC type splitter
• Space saving in chambers and sewers
• IP68 / IK09
• Utilisation in PON and Point to Point networks
• Up to 8 micro module-cable outputs of 2.5 mm
• Highly robust multi-purpose product used
in underground chambers, directly buried and
replacement of networks on walls
• Benefits for residential connections
Technical Information
Overall Dimensions:
295 x 83 x 55 mm
Material:
Thermoplastic body
Overall Volume:
1L
Fastenings:
stainless steel
Colour:
Black
Fixing:
2 screws -diameter 6 mm
(not supplied)
Degree of Protection: IP68 / IK09
µQODC configurations
Cable entries:
Derivation:
Feeder 11 mm window cut cable or 4.2 mm micro module-cable
2 Tubes of 3.3/5 mm, 2 x 4/6 mm cables or 8 2.5/3.5 mm cables
Connection point management
Micro-modules:
7 x 2.20 metres in storage beneath the cassette if used as spur on standard cables
Splices:
As standard, support for 24 x 45 mm fusion splices
Splitter:
1 location for PLC type splitter 4 x 4 mm
Ordering Information
Description
Empty micro-sleeve for transit cable
diameter 4.2 mm or 11 mm. Plugs on outlets
Micro-sleeve 24 for transit cable
diameter 4.2 mm or 11 mm. 2 off 4 x 2.5 mm outlets
Reference No.
MOQ
N501600A
13
N501604A
10
For other configurations please contact your local 3M representative
23
Fibre optic Solutions
FTTX Solutions
3 Distribution Access Network Solutions
3.2 Under and above ground distribution network
BPEO Size 0
The new BPEO Size 0 watertight splice protection closure has been specifically designed
to easily connect subscribers in the distribution network using ITU G652.D or ITU.
G657.A2 single-mode fibres.
Its compactness (volume less then 2 litres) means it can be used in any type of chamber,
even the smallest.
Its butt configuration facilitates the use in narrow chambers.
Max capacity: 48 Fibres
Volumes: < 2L
Cable diameters: 3 to 18 mm
Its double port and its 14 single ports cover all applications, depending on the
topography of the zone (residential, mixed or building).
The BPEO Size 0 has also been designed to be used in other FTTH branch applications
(aerial, on pole, or on walls) or in any type of location.
Characteristics
Advantages
• Small size and volume
• Versatile usage in the civil work
• Mounting bracket molded in the base body
• Quick to install
• ECAM mechanical cable entries - Clip closure /
simplified opening
• No tools required. New connections prepared
outside the housing with no risk to fibres already
active
• No special tooling, so faster and more efficient
Technical Information
Dimensions (Outside ECAM in mm) : Length
239
Width
222
Depth
84
Splicing capacity
4 x 1-slot cassettes or 2 x 2-slot cassettes,
that is maximum 48 fusion splices of 45 or 60 mm
Material
Thermoplastic
Colour
Black
Sealing:
IP68
Configurations of the BPEO Size 0
• 1 Double port* for 1 x ECAM D6-18 or 2 x ECAM S4-12
• 12 single ports* for ECAM S3-7
• 2 single ports* for ECAM S3.5-9.5
* The housing is supplied completely sealed, with blind plugs in all cable entry ports, which can easily be removed.
24
3 Distribution Access Network Solutions
Ordering Information
Description
Reference No.
MOQ
N501741A
10
Reference No.
MOQ
N721162A
10
N721163A
10
N721164A
10
N721165A
10
N721166A
10
N721162B
10
N721176A
10
Reference No.
MOQ
N721171A
100
N721172A
60
N721126A
10
Reference No.
MOQ
N541106A
20
K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for
12 fusion splices and PLC splitter
N541104A
10
K7-2SLOT-Universal for 12 heat shrink fusion splices
N541121A
10
K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter
N541113A
20
K7-1SLOT-6 Fibrlok™ 4 x 4 1-step Cassette equipped
with a support for 6ea Fibrlok™ 2540-G mechanical splices
N541103A
20
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped
with a support for 12ea Fibrlok™ 2540-G mechanical splices
N541108A
10
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped
with a support for 10ea Fibrlok™ 2540-G mechanical splices
N541110A
10
K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fibre G657
(lot of 12 pcs)
N541182A
1
BPEO-0 EVOL Splice Protection Housing
Description
Double ECAM
Double ECAM Body D6-18 for cable entry kit
Body for housing the double cable entry kits
Double ECAM D6-9 mm
Sealing kit with diameter from 6 to 9 mm
Double ECAM D9-12 mm
Sealing kit with diameter from 9 to 12 mm
Double ECAM D12-15 mm
Sealing kit with diameter from 12 to 15 mm
Double ECAM D15-18 mm
Sealing kit with diameter from 15 to 18 mm
Double ECAM D18 - D4,5/6 for cable entry kit
Body for housing double cable entry kits
Double ECAM D4,5-6 mm
Sealing kit with diameter from 4,5 to 6 mm
Description
Single ECAM
Single ECAM S3-7 mm
Single cable entry kit with diameter from 3 to 7 mm
Single ECAM S3.5-9.5 mm
Single cable entry kit with diameter from 3.5 to 9.5 mm
Single ECAM S4-12 mm
Single cable entry kit with diameter from 4 to 12 mm
Description
BPEO Cassette
K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices
25
Fibre optic Solutions
FTTX Solutions
3 Distribution Access Network Solutions
OSSC & OSLC & OSC30
Derivation closure for FTTx applications
ONE STEP CLOSURES (OSC) are sealed splice protections for inline derivations.
These three housings can be used for micro-module derivations inline cables.
Designed for outdoor use on walls, on façade. Their compact dimensions also mean that
they can be installed in indoor risers.
Content
• A single piece housing
• Ties to immobilised the main cable
Allowable cables:
1 or 2 branches per tube
• Sealing gel
• and the branch tubes
Max cable diameters
6.5 mm for OSSC
(One Step Small Closure)
13 mm for OSLC
(One Step Large Closure)
18 mm for OSC30
• A central part to receive the spur
• No tools needed for closure. Can be re-opened
Characteristics
Advantages
• Compact
• Sealed and mechanical closure
• No flame, no resin
No special tools
• Derivation without splices
• Space saving on façades or in risers
• IP67 / IK09
• For outdoor above ground usage
No special tools
Perfect for overhead applications
Technical Information
Sealing:
IP 67
Materials:
Thermoplastic
Colour:
Black
Cable strain relief:
Using ties
Fixing:
2 screws (not supplied)
Range of cables:
Inline cables, 1 or 2 derivation with tube
Allowable Diameters/ Dimensions
OSSC 121T: 140 x 36 x 30 m:
Distribution cable: max diameter 6.5 mm
Branching: 1 x max diameter 6.5 mm
OSSC 122T: 140 x 36 x 30 mm: Distribution cable: max diameter 6.5 mm
Branch tubes: 2 x max diameter 6.5 mm
OSLC 222: 150 x 50 x 40 mm:
Distribution cable: max diameter 13 mm
Branch tubes: 2 x max diameter 6.5 mm
OSC30: 290 x 95 x 50 mm:
Distribution cable: max diameter 18 mm
Branch tubes: 2 x max diameter 13 mm
Ordering Information
Description
26
Reference No.
MOQ
Derivation closure OSSC 121T
N501425A
25
Derivation closure OSSC 122T
N501454A
25
Derivation closure OSLC 222
N501426A
10
Derivation closure OSC30
N501652A
10
3 Distribution Access Network Solutions
3.3 Wall and Pole distribution network
PBO Size 1 NG
Its design is based on the BMX type outdoor box range. Its size has been reduced to
meet the needs of a discrete or small-sized installation.
The housing can be installed either on pole or wall.
The hinge-mounted housing cover closure is latch operated.
Max capacity: 48 fibres (4 cassettes)
Configuration:
- 1 to 2 service cables
- 12 subscriber drops
Small size
Pole bracket molded into the body of the
housing
4 break thru ports to fix on wall
The cables are anchored inside the housing on a strain relief bar.
The organiser and cassettes are the same standard as that found in our various sealed
closures and boxes.
This ensures that the internal organisation of our housings are multi-purpose.
For locking mechanism, contact 3M.
Characteristics
Advantages
• Small overall dimensions
• Discrete
• Housing with latch-operated hinged cover
• Accessibility
• Directly mounted onto wall or pole
• No fixing bracket required
• BPEO evolution organiser and cassettes
• Standard organiser and cassettes to facilitate
delivery management of all 3M housings
Technical Information
Dimensions (mm)
Height: 213
Width: 240
Depth: 73
Materials: Thermoplastics
Colour: Light Grey RAL 7035
Degree of Protection: IP 44 / IK 06
Dielectric strength for Greater than 4 kV
fixing on common supports
Cable entries / Anchorage in bottom box entrance. Capable of mid span access cables.
Anchorage and sealing for 1 to 2 feeder cables and 12 subscriber drops
Ordering Information
Description
Reference No.
MOQ
Fibre Distribution Terminal PBO NG T1
Supplied without cassette
N501733A
5
Plastic mounting bracket (need 1)
N711608A
2
27
Fibre optic Solutions
FTTX Solutions
3 Distribution Access Network Solutions
FTB (Fiber Terminal Box)
The FTB is an optical fibre distribution housing It is designed for FTTH applications on
walls or on posts.
This housing has 4 entries. It may also be equipped with a cassette for the management
of splices or supports for SC or LC connections.
The FTB offers the possibility of a configuration as 6 SC connectors or 6 Duplex LC.
It is compatible with NPC connectors.
For locking mechanism, contact 3M.
Housing supplied without connectors, NPC
connectors or jumpers
Max capacity:
12 fibres
Characteristics
Advantages
• 2 large diameter 12.7 mm ports
• 2 small diameter 3.2 mm ports
• Compatible with standard diameters of cable
and jumpers
• Elastomeric material port
• Compact
• Support for SC and LC connections
• Sealed without grommets or mastic
• 1 tray holder
• Compatible with NPC field connectors LC
and SC 3M
Cable diameter: up to 12.5 mm
Configuration:
- 2 x 12.5 mm ports
- 2 x 1.2 mm ports
Sealing:
No ECAM, no grommets
• Splitter or Incoming fibre splicing
Technical Information
Dimensions: 130 x 190 x 45 mm
Materials:
Polycarbonate housing
EPDM port
Colour:
RAL 7035
Sealing:
IP 54
Impact:
IK08
Fire:
UL 94 5V
Ordering Information
Description
Empty FTB distribution housing
Fibrlok™ mechanical splices and NPC connectors see pages 38 to 42.
28
Reference No.
MOQ
FTB-M
1
4 Solutions for Building Distribution
4.1 Building Entry Solutions
PBO Size 2
The PBO size 2 is a box for service riser connection. It is used for connection to the riser
cable as a direct or mid span to feed one or more other boxes in a cascade arrangement .
Its capacity is 144 fusion splices.
Its organiser is of the BPEO Evolution 12 SLOT type as standard with management for
fibre units and couplings.
Max capacity: 144 fibres
Cable diameter: 4 to 12 mm
Configuration:
- 1 service cable including passage
- 16 branch cables (drops)
4 break thru ports for direct mounting on
wall or for 2 mounting brackets
Characteristics
Advantages
• Internal/external multi-purpose product
• One product for several applications
• Body cover with hinge opening 120°
• Compact base of building unit
• BPEO Evolution 12 SLOT Organiser
• Up to 144 fusion splices
• Anchorage of drops using ties
• Robust product
• Possibility of cable passage
• Allows distribution on cable or directly using drops
• Splitter management
• Fusion and mechanical splices
• Installation on walls, on pole, indoor, outdoor
• Components for diameter from 4 to 12 mm
Technical Information
Dimensions (mm)
Height: 400
Width: 255
Depth: 86
Anchorage of cables
Anchorage strap for service cables and branch
cables.
Tie fixings.
Materials: Thermoplastics
Configuration:
1 service cable including as passage
16 branch cables (drops)
Degree of protection (EN 60 529): IP55 / IK 06
Colour: Cover light grey Ral 7035
Body dark grey Ral 7037
Fixing:
Wall mounting using 4 screws diameter 6 mm
(not supplied)
Capacity:
Fusion splice
144 with 12 per 1-step cassette Using a strap (20 x 0.7 mm)
Fibrlok™ splice 4 x 4 72 with 12 per 2-step cassette
Splitter
6 x 1/8 or 3 x 1/16 or 2 x 1/32
Ordering Information
Description
Reference No.
MOQ
Base of building housing PBO S2 12 SLOT
N501659A
1
Plastic fixing supports (need 2)
N711608A
2
Fibrlok™ mechanical splices and NPC connectors see pages 38 to 42
29
Fibre optic Solutions
FTTX Solutions
4 Solutions for Building Distribution
eDB²
Max capacity: 24 SC simplex connections
Configuration:
Empty housing to receive equipment for a high
degree of modularity
Fitting:
As cascade or in line
Option to use as shared distribution point
The eDB² is a fibre optic distribution box designed for installations at the base of
buildings and on floor landings.
This housing is modular and has a wide range of accessories in order to meet the needs
of various fibreoptics applications
The eDB² is an ideal FTTH distribution point with its 48-fibre capacity.
It is also suitable to create a multi-operator mutualisation point.
Equipped with the BPEO organiser, this product provides a management system for
mechanical splices and splitters.
This housing is made up of 2 separate compartments to ensure the best possible
protection for splices and splitters. It may also be equipped with SC/APC connection
systems and with drops.
The eDB² offers the option of installation in the form of a cascade. The in-line
configuration meets high-capacity fibre requirements.
eDB² Base Assembly
Accessory Pack 1
•
•
•
•
•
•
•
•
•
•
• 1 x 6 x 13 Cable Entry
• 1 x Cable Slack Drum
• 1 x Rear Entry
2 x Patch field 12 x SC
2 x Cable Entry 10x5mm
1 x Splitter holder
2 x PAS II empty
2 x Splice Holder Heat shrink
2 x Splice Holder Crimp
4 x Strain Relief black
2 x Label 1-12 und 13-24
2 x Flex Bridge
1 x Inner Cover incl. holder etc.
Accessory (Drop fix)
• 50 x Dropfix
Characteristics
Advantages
• High degree of modularity for use
internally or externally
• Product suitable for various applications
• Organiser with swivel cassette
• Distinction of active and passive fibres
• Organiser with area for storage of ready fibre
• Excellent cable support
• Ease of access to every fibre
• Device for immobilisation of the cable/tubes
and drops
• Wall mounting
Technical Information
Characteristics
FO Capacity
Fusion splices
Mechanical splices
48
24
Cassettes
4
4
Cable
20 drops with a maximum diameter of 5 mm
2 main cables with a maximum diameter of 13 mm
Dimensions (mm)
Height: 320
Width: 248
Depth: 50
Materials: Thermoplastics
Colour: Body and cover Ral 7035
Degree of protection (EN 6529): IP 55 / IK 06
Ordering Information
30
Description
Reference No.
eDB² Base Assembly
52-500-00000
1 ea
Accessory Pack 1
52027-544 00
1 ea
Accessory (Dropfix)
52031-600 00
50 ea
For individual project adaptations of the eDB2 please contact your local 3M representative.
MOQ
4 Solutions for Building Distribution
4.2 Building Floor Solutions
PBPO 24 NG Symetric
Max capacity: 48 fibres
Cable diameter: 4.5 to 13.5 mm
Configuration:
12 ports for 12 to 24 branched cables
Immobilisation: Using ties
Floor Box
The PBPO 24 is a genuine interface between vertical distribution and subscriber connection cables.
Installation on standard cables and window cut riser cables.
Composition:
• A zone in which the vertical cable passes, with two anchorages
• A zone for coiled stowage of fibres and microtubes, passing or awaiting use
• A BPEO Evolution generation 4-step organiser
• A choice of cassettes for fusion- or mechanical splices or for splice-in PLC splitters
• Capacity from 12 to 48 splices
The PBPO 24
The PBPO 24 is equipped with 12 ports for 12 to 24 drop cables. The cables are anchored on external pin
brackets in front of the sealing partition, using ties.
Characteristics
Advantages
• Compact housing, sliding cover
• Exposed or service riser mounting
• Double anchorage of the main cable
• Large stowage area for microtubes and fibres
• Mounting on stretched cable, standard cable
as spur, or junction of two cables
• BPEO evolution type organiser
• Management of non-sleeved fibres, no re-tubing
• 4-slot capacity
• Large number of possible cassette combinations
• Riser pathway left and right
• For any riser configurations
Technical Information
Dimensions (mm)
Height: 204
Width: 158
Depth: 52
Materials: Thermoplastics
Colour: White
Degree of Protection: IP 40 / IK 08
Allowable cables: Mounting on stretched cable, standard cable as spur, or junction of two cables
Allowable cable diameters
- Main: 13.5 mm
- Branch: 4.5 mm
Cable immobilisation:
Main: on 2 cradles (2 ties + 2 force restraints)
Branches: 12 entry ports with exterior immobilisation using ties for 1 or 2 branch cables
Connections:
• 4-step organiser to accept the entire range of BPEO cassettes
• Management of non-sleeved fibres
• Large storage zone for fibres and micro-tubes
• Maximum capacity 48 fusion type splices
Ordering Information
Description
Reference No.
MOQ
PBPO 24 NG Symetric - External drops immobilisation
N501758A
10
Kit backmount plate
N711833A
10
Protection Cover
N681288T
10
31
Fibre optic Solutions
FTTX Solutions
4 Solutions for Building Distribution
PBPO/C NG Symetric
Interior connection housing
The PBPO/C is a genuine interface for connection between a vertical distribution unit and equipment
Installation on standard cables and window cut riser cables.
Composition:
• A zone in which the vertical cable passes with two anchorage points
• A zone for coiled stowage of fibres and microtubes passing or ready for use
• A BPEO Evolution generation 4-step organiser
• A choice of cassettes for fusion- or mechanical splices or for splice-in PLC splitters
Supplied without connectors
Capacity
• from 12 to 48 splices
• Support plate for 16 connectors of connection type SC/PC or SC/APC
Characteristics
Advantages
Cable diameter:
13.5 mm for main cable
4.5 mm for branched cable
• Compact housing, sliding cover
• Exposed or service riser mounting
• Double anchorage of the main cable
• Large storage area for microtubes and fibres
• Mounting on stretched cable, standard cable
as spur, or junction of two cables
Configuration:
For 16 SC simplex couplings
• BPEO evolution type organiser
• Management of non-sleeved fibres, no retubing
• 4-slot capacity
• Large number of possible cassette combinations
• Riser pathway left and right
• For any riser configuration
Max capacity: 48 fibres
Immobilisation: Using ties
Technical Information
Dimensions (mm)
Height: 204
Width: 158
Depth: 52
Materials: Thermoplastics
Colour: White
Degree of Protection: IP 40 / IK 08
Allowable cables: Mounting in stretched cable, standard cable as spur, or junction of two cables
Allowable cable diameters
- Main: 13.5 mm
- Branch: 4.5 mm
Cable immobilisation:
- Main: on 2 cradles (2 ties + 2 force restraints)
- Branched: 16 entry ports with exterior immobilisation using ties for 1 or 2 branch cables
Connections:
• 4-step organiser to accept the entire range of BPEO cassettes
• Management of non-sleeved fibres
• Large storage zone for fibres and micro-tubes
• Maximum capacity 48 fusion type splices
Ordering Information
Description
32
Reference No.
MOQ
PBPO/C NG Symetric
N501760A
10
Kit backmount plate
N711833A
10
Protection Cover
N681288T
10
4 Solutions for Building Distribution
4.3 Solution for Living Units
Wall Outlet 4 Fibres
The wall outlet 4 fibres is the latest development of our terminal points for subscribers,
specifically designed for connection of subscribers in very dense zones.
Reduced format for installation of 1 to 4 optic ports of type SC.
Installation inside the communications panel or wall mounting inside the
accommodation.
Base unit provided with four side access points for connection cable, plus rear access
for the entry through flush mounted housing.
Oultlet for communications panel or wall
mounting
Characteristics
Advantages
Connection system: SC/APC
• Dimensions : 100 x 82.5 x 30.8 mm
• Compact housing with protected connections
Coupling type: SC/APC shuttered couplings
• Vertical or horizontal attachment on DIN rail
• Fibre central protection cover (network side)
• Ease of integration into all types of
communications panel
• Management of fibre optics in a cassette
• Differentiated access for installation and operation
• Removable cassette with built-in cable
immobilisation and connector supports
of the 4 connectors and of the connector
for the client lead using peripheral cover
• Multiple use capabilities: cables ready-fitted with
connectors, field connectors, mechanical or fusion
splices
Max capacity: 4 fibres
Configurations:
- Outlet with 2 pre-terminated SC/APC
connectors/couplings to a 2 fibre cable
- Outlet with 2 pre-terminated SC/APC
connectors/couplings to a 4 fibre cable
- Outlet with 4 pre-terminated SC/APC
connectors/couplings to a 4 fibre cable
- Outlet with 4 SC/APC couplings and
2 SC/APC pigtails
- Outlet with 4 SC/APC couplings
• Identification of the subscriber connection
by protected label beneath transparent flap
• Improved reliability through protection of the
connection and total protection of the connectors.
• Fixing strip
Design: compact
Technical Information
Dimensions (mm)
Height: 82.5
Width: 100
Overall thickness: 30,8
Thickness / Rail : 25
Materials: Thermoplastics
Colour: White- RAL9010
Connection system: SC/APC
Splice support: For 4 mechanical splices, fusion splices or both
33
Fibre optic Solutions
FTTX Solutions
4 Solutions for Building Distribution
Technical information (cont)
Content of the delivery:
Base, cassette, central cover, peripheral cover, strip, cable anchoring fixtures, labelling
Stowage: 1metre of 250 µm or 900 µm fibre
Wall fixing 3 fixing options
Directly using 2 screws (not supplied)
Clip fixing onto the small strip, fixed to the wall using 2 screws
Screwed fastening onto a flush-mounted housing
Protection index: IP40
Connection protection: The connectors and terminals are protected by the cover
Standard connection with pigtails and splices or use of FMC type field connection system
(Field Mountable Connector) or use of pre-terminated cables with connectors ready-fitted.
Use as 1, 2, or 4 SC/APC connection
For fusion- or mechanical splices
Ordering Information
Description
Wall outlet equipped with 4 shuttered SC/APC couplings
Wall outlet equipped with 4 shuttered SC/APC couplings
and 2 SC/APC pigtails
Wall outlet equipped with 4 shuttered SC/APC couplings with
4 pre-terminated SC/APC connectors to a 4 fibre cable, 25 m
Wall outlet equipped with 4 shuttered SC/APC couplings with
4 pre-terminated SC/APC connectors to a 4 fibre cable, 40 m
Wall outlet equipped with 4 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 4 fibre cable, 25 m
Wall outlet equipped with 4 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 4 fibre cable, 40 m
Wall outlet equipped with 2 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 2 fibre cable, 25 m
Wall outlet equipped with 2 shuttered SC/APC couplings with
2 pre-terminated SC/APC connectors to a 2 fibre cable, 40 m
34
Reference No.
MOQ
N501689A
10
N501677A
10
N501762A
1
N501763A
1
N501680A
1
N501681A
1
N501682A
1
N501683A
1
4 Solutions for Building Distribution
Wall Outlet 2 Fibres
The 83 x 106 is used as an interior derivation and terminaison box.
Installation inside the communications panel or wall mounting inside the
accommodation.
Base unit provided with three side access points (5 in the branch/transition version) for
connection cables, plus rear access for the entry through flush mounted housing.
Wall fixing.
Characteristics
Advantages
Capacity: 2 fibres
• Format 106 x 83 x 24 mm
• Compact housing
Design
• Management of fibre optics using cassettes
• Swivel cassette for fusion and mechanical splices
Connection system: SC APC
• Designed for 3 types of use: Terminal point,
branch housing or transition
• Multi-purpose
Outlet for wall fixing.
Configurations:
Equipped with a shuttered coupling
Equipped with 2 shuttered couplings
Equipped with 2 shuttered couplings
and 1 pigtail
• 2 labelling zones
• Differentiated zones for the operator logo and
the subscriber's number
Technical Information
Description: Wall Outlet 2 FO
Dimensions (in mm)
Height: 83
Width: 106
Overall thickness: 24
Materials: Thermoplastics
Colour: White- RAL9010
For subscriber cable max diameter 6 mm
Connection: 2 optical connections to SC/APC standard
Splice support: For 2 mechanical splices or 4 fusion splices
Make-up of equipment supplied: Base, cassette, cover, cable immobilisation
Stowage: 1 metre of 900 µm fibre
Fixing: Wall mounted or on flush-mounted housing using 2 screws
Protection index: IP40
Port protection: SC/APC shuttered couplings
Ordering Information
Description
Reference No.
MOQ
Wall Outlet 2 FO equipped with a shuttered coupling
N501752A
24
Wall Outlet Point equipped with 2 shuttered couplings
N501753A
24
Wall Outlet 2FO equipped with 2 shuttered couplings
and 1 pigtail
N501754A
24
35
Fibre optic Solutions
FTTX Solutions
4 Solutions for Building Distribution
4.4 FTTH Wall Outlets
3M™ 8686 FTTH Wall Outlet
The 8686 FTTH Wall Outlet is a universal access point for FTTH end user installation.
This outlet is designed to match with new generation of field mountable connectors like
3M No Polish Connectors (NPC).
Field mountable connector termination in the 8686 outlet avoid installing a fiber storage
tray and splicing.
Alternatively, the splicing of pigtails and the storage of splices, either fusion
or 3M Fibrlok™ mechanical splices is designed into the concept.
On the wall cable entry is possible from either the sides or from the top of the outlet.
The 8686 outlet can be mounted on the wall or on underwall 60 mm boxes.
Up to 4 SC simplex couplings can be mounted if used with G.657.A bend insensitive
fibre.
Specifications
Dimensions:
86 x 86 x 35 mm (WxLxD)
Capacity:
4 x SC simplex (G.657.A fibre)
2 x SC simplex (G.652.D fibre)
2 x LC duplex (G.657.A fibre)
Connectivity:
3M NPC connectors or 900 µm pigtails
Cable:
FRP drop cable or round cable 4-6 mm
Cable entry:
Backside or all vertical and horizontal sides
Fixation:
Holes for screw fixing (60 mm distance)
Additional features:
Splice holder for mechanical or heatshrink fibre splices
Keystone port for Kat 5 jack
Ordering Information
Description
Fibre Optic Wall Outlet 4 x SC simplex with Keystone Port for RJ45 Jack
36
Reference No.
MOQ
8686
10
4 Solutions for Building Distribution
3M™ VOL-0256-C FTTH Wall Outlet
The VOL-0256-C FTTH Wall Outlet is a universal access point for FTTH end user
installation which has integrated dust shutters.
This outlet is designed to match with new generation of field mountable connectors
like 3M No Polish Connectors (NPC).
Field mountable connector termination in the VOL-0256-C outlet avoid installing
a fiber storage tray and splicing.
Alternatively, the splicing of pigtails and the storage of splices, either fusion
or 3M Fibrlok™ mechanical splices is designed into the concept.
On the wall cable entry is possible from either the sides or from the top of the outlet.
The outlet can be mounted on the wall or on underwall 60 mm boxes.
Up to 2 SC simplex or 2 LC duplex couplings can be mounted inside the keystone
adapters if used with G.657.A bend insensitive fibre.
Specifications:
Dimensions:
86 x 86 x 27 mm (W x L x D)
Capacity:
2 x SC simplex (G.657.A fibre)
2 x LC duplex (G.657.A fibre)
Connectivity:
3M NPC connectors or 900 µm pigtails
Cable:
FRP drop cable or round cable 4-6 mm
Cable entry:
Backside or all vertical and horizontal sides
Ordering Information
Description
Fibre Optic Wall Outlet 2 x SC simplex with Keystone Adpater
and Dust Shutters
Reference No.
MOQ
VOL-0256-C
20
37
Fibre optic Solutions
FTTX Solutions
5 FTTH Connectivity
5.1 NPC Connectors
Quick and Easy connectivity for the „Last Mile“
Pre-assembled mechanical splice-on connectors
3M™ No Polish Connectors (NPC)
3M™ No Polish Connectors (NPC) help enable fast, on-site installation of 250 µm,
900 µm and jacketed single-mode and multimode fiber and cable
• One piece, pre-assembled design
• Factory polished, no field polish
• Integrated mechanical splice element
• No loose parts
• Ideal for FTTP drop termination
• Quick installation no electrical power
• Activation tool included
• Integrated strain relief for 900 µm buffer
• SC/APC and LC/APC also available with flat or keyed angle splicing
• Re-opening tool incl. for reusability
• Training videos online
• Compatible with common SM fibres (ITU.G652.D, G657A)
NPC UPC - Specifications
6800-50
Multimode
6800-50/LOMMF
6800-62.5
Single-mode
8800
Insertion loss Typical at 1300 nm
0.2 dB
0.2 dB
0.2 dB
0.3 dB
Reflection typical at room
temp 23° C (73° F) (dB)
< -30 dB
< -30 dB
< -25 dB
< -40 dB
Connector durability
< 0.1 dB change
after 500 matings
< 0.1 dB change
after 500 matings
< 0.1 dB change
after 500 matings
< 0.2 dB change
after 100 matings
Operating temperature
-40° C to 75° C
-40° C to 75° C
-40° C to 75° C
-40°C to 75°C
< 0.1 dB increase at 2.2 N
for 900 µm
< 0.1 dB increase at 2.2 N
for 900 µm
< 0.1 dB increase at 2.2 N
for 900 µm
< 0.1 dB increase at 2.2 N
for 900 µm
< 0.1 dB increase at 2.2 N
for 900 µm
< 0.1 dB increase at 2.2 N
for 900 µm
< 0.5dB increase at 6.9 N
for 900 µm*
< 0.1 dB increase at 2.2 N
for 900 µm*
Material
Connector ferrule
Connector housing and body
Boot
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Zirconia ceramic
Engineered resin
Thermoplastic elastomer
Flame retardancy
UL-94 V-O
UL-94 V-O
UL-94 V-O
UL-94 V-O
Connector identification
Backbone
Housing
Boot
Black
Black
White
Black
Aqua
White
Black
Beige
White
Black
Blue
White
8865-C
8865-C
8865-C
8865-C
Cable tension (in service)
Straight pull
Side pull
Field termination kit
(no power needed)
The SC MM NPC meets EIA/TIA 568-8.3 and IEC requirements.
* Connectors tested under load
38
5 FTTH Connectivity
NPC APC - Specifications
Fiber diameter:
Insertion loss:
Reflection
(Flat splice):
(Angle splice):
Connection durability, after 100 matings:
Operating Temperature:
Cable tension (In service):
Side Pull (In service):
Water immersion, 43°C (109°F), 3 days:
Dimensions:
125 µm
0.3 dB typical
-55 dB typical at room temperature
< -35 dB for -40° C to 75° C
-65 dB typical at room temperature
< -60 dB for for -40°C to 75°C
< 0.2 dB change
-40° C to 75° C (8832-APC -10°C to 60°C)
< 0.5 dB increase at 4.9N for 250 µm
< 0.5 dB increase at 6.9N for 900 µm
< 0.5 dB increase at 6.9N for 900 µm
< 0.2 dB increase after 24 hour dry time
12.7 x 12.7 x 49 mm
Ordering Information
Description
Reference No.
MOQ
SC/APC SM 9/125 µm NPC Connector 250/900 µ, Angle Splice, incl. tool
8800-APC/AS
60
SC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool
8800-APC/FS
60
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP,
Flat Splice
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP,
Angle Splice
8802-T/APC/
FS/1.6-3.0
8802-T/APC/
AS/1.6-3.0
LC/APC SM 9/125 µm NPC Connector 250/900 µ, Angle Splice, incl. tool
8830-APC/AS
60
LC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool
8830-APC/FS
60
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket, Flat Splice
8832-APC/AS
60
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket, Angle Splice
8832-APC/FS
60
60
60
MOQ of all types is 60 each including one activation tool.
3M™ No Polish Connector Termination Kit 8865 and 8865-C
• Enables fast, on-site installation of NPC Connectors on 250 µm, 900 µm and jacketed singlemode
and multimode fiber cable
• Low cost kit with or without cleaver
3M™ Angle Splicing Kit 2565 for NPC Connectors
and Fibrlok™ Splices
• Enables fast, on-site installation of NPC/APC Connectors on 250 µm and 900 µm singlemode
and multimode fibre with angle splicing
• Kit contains angle cleaver and splicing tools for keyed angle splicing
Ordering Information
Description
Reference No.
MOQ
8865-C
1
No Polish Connector Preparation Kit without Cleaver
8865
1
Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave Tool
2565
1
No Polish Connector Preparation Kit with Cleaver
MOQ for all Kits is 1 each.
39
Fibre optic Solutions
FTTX Solutions
5 FTTH Connectivity
5.2 Crimplok + Connectors
Quick and Easy connectivity for the „Last Mile“
No Splice - No Gel mechanical grip-on connectors
3M™ Crimplok + Connectors
3M™ Crimplok + Connectors help enable fast, on-site installation of 250 µm
and 900 µm singlemode and multimode fiber and cable
• One piece, pre-assembled design
• No splice - No gel
• Integrated mechanical grip element
• No loose parts
• Ideal for FTTP drop termination
• Quick installation no electrical power
• Quick field polish with Nano Finisher
• Polishing film comes with each connector
• Activation tool included
• SC/PC and SC/APC
• Training videos online
• Compatible with all SM fibres
3M™ Crimplok™ + Connector Specifications
MM
6700-50
MM
6700-50/LOMMF
MM
6700-62.5
SM
8700-UPC / 8700-APC
Reflection (dB)
< -30
< -30
< -30
< -40 (UPC) / <-60 (APC)
Connector durability,
after 500 matings
< 0.1 dB change
< 0.1 dB change
< 0.1 dB change
< 0.2 dB change
Operating temperature
-10° C to 60° C
-10° C to 60° C
-10° C to 60° C
-40° C to 75° C
< 0.1 dB increase at 5 N
for 900 µm
< 0.1 dB increase at 5 N
for 900 µm
< 0.1 dB increase at 5 N
for 900 µm
< 0.5 dB increase at 6.9 N
for 900 µm
< 0.1 dB increase at 2 N
for 900 µm
< 0.1 dB increase at 2 N
for 900 µm
< 0.1 dB increase at 2 N
for 900 µm
< 0.5 dB increase at 6.9 N
for 900 µm
Black/White
Aqua/White
Beige/White
Blue/White (UPC)
Green/White (APC)
8765-UPC
8765-UPC
8765-UPC
8765-UPC (UPC)
8765-APC (APC)
Cable tension (in service)
Straigh pull
Side pull
Connector identification
Housing/Boot
Field termination kit
(no power needed)
Ordering Information
Description
MOQ
8700-PS/UPC
60
Crimplok™ + Connector SC/APC, SM, 900 µm, (60ea) with PS Tool
8700-PS/APC
60
MOQ of Crimplok + Connectors is 10 each (excl. PS tool) or 60 each (incl. PS tool).
40
Reference No.
Crimplok + Connector SC/UPC, SM, 900 µm, (60ea) with PS Tool
™
5 FTTH Connectivity
3M™ Crimplok + Termination Kits
• Enable fast, on-site installation of 250 µm and 900 µm singlemode and multimode fibre
• Special kits for SC/PC and SC/APC
• Standard flat cleaver
• Nano Finisher included
• Protrusion setting tool (PS tool) included
Ordering Information
Description
Reference No.
MOQ
Crimplok + SC/UPC Connector Kit
8765-UPC
1
Crimplok + SC/APC Connector Kit
8765-APC
1
™
™
MOQ of all Crimplok + Termination Kits is 1 each
41
Fibre optic Solutions
FTTX Solutions
5 FTTH Connectivity
5.3 Fibrlok™ Mechanical Splices
Quick and Easy splicing for the „Last Mile“
3M™ Fibrlok™ Mechanical Splices
3M™ Fibrlok™ Mechanical Splices help enable fast, on-site splicing of 250 µm
and 900 µm single-mode and multimode fiber
•
•
•
•
•
•
•
•
•
One piece, pre-assembled design
Splice element compensates fibre OD tolerances
Flat - and angle splice version for high return loss
Quick and easy installation
Two different sizes 4 x 4mm and 4 x 6mm
Simple and low cost tooling for flat and keyed angle splicing
Online training videos
20 years field experience with 15 million installed splices
Losses equivalent to fusion splicing
Specifications
Fiber diameter:
Coating diameter:
Mean insertion loss:
Reflectance:
Tensile strength:
Material:
Operating temperature:
Thermal cycling:
Fungus resistance:
Vibration:
Water immersion:
Extended high humidity:
125 µm
250 or 900 µm
< 0.1 dB
< -35 dB from -40° to 80° C
< -60 dB typical at room temperature
4.4N minimum; 13.2N typical
Engineering thermoplastic with aluminium alloy element; UL 94, V-O rating
-40° to 80° C
Change in insertion loss < 0.5 dB, -40° to 80° C
ASTM G-21-70; rating 0
IEC 61300-2-1 (EIA standard FOTP-11; test condition 1)
Seven days at 43° C; change in insertion loss ≤ 0.05 dB;
21,000 hours with < 0.2 dB change
8,812 hours at 85° C, 85% humidity with < 0.2 dB change
Ordering Information
Description
Reference No.
MOQ
2529
60
Fibrlok II Angle Fiber Splice, 250 µm and 900 µm (4 x 6 mm)
2529-AS
60
Fibrlok 250 µm Flat Fiber Splice (4 x 4 mm)
2540-G
60
Fibrlok 250 µm Angle Fiber Splice (4 x 4 mm)
2540-AS
60
Fibrlok II Universal Flat Fiber Splice, 250 µm and 900 µm (4 x 6 mm)
MOQ for all Fibrlok splices is 60 each
3M™ Fibrlok™ Preparation Kits
3M™ Fibrlok™ Preparation Kits help enable fast, on-site splicing of 250 µm and 900 µm
singlemode and multimode fiber with Fibrlok splices.
• Low cost tool kits with or without flat cleaver
• Actuation tools for both Fibrlok types included
Ordering Information
Description
Fibrlok Fiber Prep Kit (w/ Cleaving Tool CI-01A), 2501, 2504-G
and Fibrlok samples
Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501, 2504-G
and Fibrlok samples
MOQ of all Fiberlok + Termination Kits is 1 each.
42
Reference No.
MOQ
2559-C
1
2559
1
5 FTTH Connectivity
5.4 Fibrlok™ Indoor FRP Splice Connector
Quick and Easy splicing of FRP drop cable
3M™ 2569 Indoor FRP Splice Connector
3M™ 2569 Indoor FRP Splice Connector help enable fast, on-site splicing of 2 x 3mm
FRP 1 fibre indoor drop cable
• One piece, pre-assembled design
• Splice element compensates fibre OD tolerances
• Flat- and angle splice version for high return loss
• Quick and easy inline splicing of 2 x 3mm FRP drop cable
• Perfect strain relief due to aramide clamping
• Two colours, grey and ivory
Specifications
Appplication:
Indoor application
Dimensions:
9 x 82 mm (Ø x L)
Cable type:
Suitable for 2 x 3 FRP cable
Insertion loss:
0.1 dB typical
Reflection:
≤ -40 dB typical at room temperature
Cable retention force:
> 40N
Operating temperature:
-20° to 60° C
Temperature cycling:
-40° C ~ +85° C, 21 cycles, 168h, online test, IL change ≤ 0.1 dB
Salt Spray:
5% NaCl, +35° C, 48 h, IL change ≤0.1 dB
Vibration:
Amplitude 1.5 mm, 10 Hz - 55 Hz, 3 axis, 2 hours per axis, 45 Hz sweep,
IL change ≤ 0.1 dB
Impact:
Height: 1.5 m, 8 times drop test, IL change ≤ 0.1 dB
Compression:
Load: 5 N, Load time: 1 min, IL change ≤ 0.1 dB
Torsion:
Load: 15 N; 10 times per minute, 100 times, IL change ≤ 0.1 dB
Tension:
20 N, online test, 40 N, offline test, last for 2 mins, IL change ≤ 0.1 dB
Re-open:
5 times, IL change ≤ 0.1 dB
Ordering Information
Description
Reference No.
MOQ
FRP Splice Connector (Ivory)
2569
100
FRP Splice Connector (Grey)
2569
100
MOQ for all FRP Splice Connectors is 100 each.
43
Fibre optic Solutions
FTTX Solutions
5 FTTH Connectivity
5.5 3M™ One Pass Mini Fibre Pathway LSZH
• 3M™ One Pass Mini Fiber Pathway is designed for use in brownfield Multi Dwelling
Units (MDUs) or Single Family Units (SFUs) serviced by FTTH networks
• Also suitable for hotels, schools, hospitals, and small businesses
• The One Pass Mini pathway is a single fiber flexible, surface-mount cable pathway
and drop cable solution installed in just one pass
• Used to connect to hallway distribution cables from a point-of-entry location near an
apartment door to a wall outlet in the living unit positioned near an ONT
• Utilizes 3M adhesive technology to adhere duct to wall
• Compatible with a variety of wall surfaces
• Suitable for indoor use only as LSZH material
3M™ One Pass Mini Fibre Pathway Duct
3M™ One Pass Small Surface-Mount Point-of-Entry
Box SM-SMALL-POE-10-IV and 3M™ No Polish Connector 8800-APC/AS
44
• Low smoke zero halogen construction
Feature
Benefit
•
One Pass Mini pathway is low profile and less
obtrusive than existing drop cable solutions
•
Respects apartment aesthetics; a unique cable
pathway solution for high-end apartments where
exposed cables are not acceptable to tenants,
increasing service provider revenue opportunities
•
One Pass Mini pathway facilitates use of small
desktop ONTs
•
Virtually eliminates time and expense of running
new wiring (electrical, RJ-11, coax) to closets
where large wall mount ONTs are typically placed
•
3M™ One Pass Mini Fiber Pathway Duct was
designed to work on concrete walls where
stapling ruggedized drop cables isn’t an option
•
Apartments with concrete walls can now be
wired for FTTH services quickly and cost
effectively, increasing potential revenue for the
FTTH service provider
•
Use of adhesive technology to mount One Pass
Mini Duct enables quiet installation, maintains
signal integrity, and eliminates marks left on
ceilings from staple guns
•
Provides minimally disruptive customer installation
experience and preserves apartment aesthetics
while reducing potential for macrobends and high
attenuation that may be caused by stapling
•
One Pass Mini has few pieces to install
•
Installation is easy, training crews takes less time
and is less costly than some traditional methods;
eliminates time spent loading/unloading staple
guns needed for stapling ruggedized drop cables
•
One Pass Mini pathway is compatible with the
3M™ One Pass Fiber Pathway for horizontal cable
applications
•
Final drop cable installation time is significantly
reduced, and customer installation time
diminished
•
Duct can be cut to needed length and quickly
and easily field terminated with 3M™ No Polish
Connector
•
Limits fiber waste and large boxes designed
to store excess cable slack. Expensive and time
consuming fusion splicing machines are no longer
needed for terminations
5 FTTH Connectivity
3M™ One Pass Mini Fibre Pathway
Apartment Layout and Product Placement Illustration
Bedroom
Living Room
Coax
RJ-11 Electrical
LC
3M™ One Pass Fibre Pathway or Alternative Horizontal Cable Pathway Solution
3M™ One Pass Mini Fibre Pathway
3M™ One Pass Mini Fibre Pathway Duct
LSZH One Pass Mini
LSZH One Pass 2
Fiber Mini
LSZH One Pass 4
Fiber Mini
1
2
4
900 µm
250 µm
250 µm
blue, orange
blue, orange, green,
brown
Number of Fibers
Fiber coating
Fiber coating color
white
Fiber type
Ultra bend insensitive fiber (ITU G.657.B3)
Jacket material
Low smoke zero halogen polyolefin
Jacket colour
Ivory
Jacket paint ability
Paintable with either latex or oil based paint
Flammability
Fiber pathways has been tested to the requirements of IEC 60332-3-25 and
IEC 61034-2, with modified test procedures. Note 1
LSZH
Fiber pathways have been tested to the requirements of IEC 60754-2
Installation Temperature
16°C to 38°C and 30-50% relative humidity. Notes 2,3
Storage Temperature
The product should be stored at 4°C to 38°C and 0-95% relative humidity.
The optical product storage conditions are 22°C and 50% relative humidity.
Failure to properly store the product may void the product warranty.
Operating Temperature
4°C to 38°C and 0-95% relative humidity
UV Resistance
Installed duct tested to indoor UV requirements of ASTM G 154
Notes
1 Since this product is designed to be affixed to a wall in application, the fiber pathway was tested pursuant to
IEC 60332-3-25 and IEC 61034-2 after being adhered to a sheet rock wall or a metal strip.
2 Allow fiber pathways and accessories to acclimate for 24 hours at recommended product installation temperature prior to
install.
3 For optimum curing of the adhesive, hold recommended installation temperature conditions for 72 hours after.
900 µm Ultra Bend
Insensitive Fibre
(G.657.B3)
1 Fibre Duct
0.32" (8.1 mm)
0.13"
(3.4 mm)
3M Adhesive
45
Fibre optic Solutions
FTTX Solutions
5 FTTH Connectivity
3M™ One Pass Mini Fibre Pathway Duct
Wall Surface Compatibility Test Results
Wall Surface Type
Pass
Painted Smooth Surfaces
Flat Latex
Yes
Semi-gloss Latex
Yes
Glossy Latex
Yes
Semi-gloss Alkyd
Yes
Painted Textured Surfaces: Light Stucco & Cement Block
3M™ One Pass Mini Surface-Mount Point-of-Entry
Wall Cover
Flat Latex
Yes
Semi-gloss Latex
Yes
Glossy Latex
Yes
Semi-gloss Alkyd
Yes
Wallpapered Surfaces
Plain Paper
Yes
Vinyl Coated
Yes
Vinyl
Yes
Polyolefin Woven
No
Unfinished and/or Unpainted Brick, Concrete, or Block
3M One Pass Mini Surface-Mount Wall Outlet
™
No
3M™ One Pass Mini Fibre Pathway Duct
Ordering Information
Description
3M™ One Pass Mini Surface-Mount Wall Outlet and
3M™ No Polish Connector 8800-APC/AS
46
Reference No.
MOQ
ONE PASS MINI DUCT LSZH 100 m NO TERM
ILU-300-01-000-LS
1 Spool
ONE PASS MINI DUCT LSZH 100 m 2 fibres NO TERM
ILU-300-02-000-LS
1 Spool
ONE PASS MINI DUCT LSZH 100 m 4 fbres NO TERM
ILU-300-04-000-LS
1 Spool
5 FTTH Connectivity
3M™ One Pass Mini Fibre Pathway Product Accessories
Ordering Information
Description
Reference No.
MOQ
One Pass Mini Surface-Mount Wall Outlet, 2F
ILU-SM-WO-02-SCA-IV
60
One Pass Mini Surface-Mount Wall Outlet, 2F
ILU-SM-WO-02-SCU-IV
60
One Pass Mini Surface-Mount POE Wall Cover
ILU-SM-POE-WC-IV
60
ILU-PLN-12-IV
60
ILU-ANCHOR-12-IV
60
ILU-EXT-12
60
ILU-BRIDGE-125-60
60
ILU-DUCT-INSTALL-TOOL
4
One Pass Mini Planar Corners, 12 Corners Per Bag
One Pass Mini Mechanical Anchor, 12 Per Bag
One Pass Mini Exterior Corner Supports, Formed (Metal),
12 Per Bag
One Pass Mini Bridge Strip 31 cm Long 60 Per Kit
One Pass Mini Duct Installation Tool
One Pass Mini Duct Flange Removal Tool
One Pass Mini Installation Tool Kit, ILU
ILU Fiber Repair Kit
ILU-DUCT-CHOMPER-TOOL
4
ILU-TOOL-KIT
1 Kit
ILU-REPAIR-KIT
1
ILU Wall Surface Compatibility Test Kit
ILU-TEST-KIT
1
One Pass Surface-Mount Point-of-Entry Box
SM-POE-10-IV
60
SM-SMALL-POE-10-IV
60
8800-APC/AS
60/Package
3M™ No Polish SC Connector SM Plug 250/900
(blue housing)
8800
60/Package
Fiber Optic Angle Cleave Kit with Angle Cleaver
2565
1/Package
Fiber Optic Angle Cleaver
2535
1/Package
Fiber Optic Flat Cleaver
2534
1/Package
Optical Terminal Box with 2 SC adapters
N501688A
10
Optical Terminal Box with 4 SC adapters
N501689A
10
One Pass Small Surface-Mount Point-of-Entry Box
3M™ No Polish Connector SC/APC SM Angle Splice 250/900
47
Fibre optic Solutions
FTTX Solutions
Index
Reference No.
Page
Reference No.
Page
RFO NG - Pre wired module 12 SC/APC G652D
Description
N541133A
11
K7-2SLOT-Universal for 12 splices
N541121A
16,18,20,22,25
RFO NG - Pre wired module 12 SC/UPC G652D
N541181A
11
N721126A
16,18,20,22,25
RFO NG Symetric - Prewired Module 12 SC/APC G652
N541193A
11
ECAM Single S4-12 Single cable entry kit with diameter
from 4 to 12 mm
RFO NG - Pre wired module 12 SC Multi-mode OM3
N541199A
11
Coupling holder 12 x SC connectors for BPEO S2, S3
N711605A
16,18,22
RFO NG - 1000 m reel of tube D5/3
N581203A
11
ECAM Double D5-20 Double cable entry kit with diameter
from 5 to 20 mm
N721130A
16,18,22
RFO NG - 25 m reel of tube D5/3
N581207A
11
ECAM Extended S12 - 12 x 1.5 for 12 x 1.5 mm cables
N721140A
16,18,22
Protective patchcord holder for RFO NG symetric tray
N671317A
11
ECAM Extended S18 - 7 x 5.5 mm for 7 x 5.5 mm cables
N721141A
16,18,22
RFO NG - Breakout Housing DEECAM D18 for 24 D5/3
N711547A
11
ECAM Extended S12 - 10 x 2 mm for 10 x 2 mm cables
N721142A
16,18,22
RFO NG - Breakout Housing DEECAM D25 for 60 D5/3
N711597A
11
ECAM Extended S12 - 4 x 4 mm for 4 x 4 mm cables
N721146A
16,18,22
RFO NG - 12-drawer chassis 144 fibres (without module)
N711747A
11
RFO NG - 6-drawer chassis 72 fibres (without module)
N711748A
11
N501491A
18
RFO NG - Frame 3.25 m - 11 levels
N801584A
11
N501492A
18
RFO NG - Frame 2.00 m - 6 levels
N801585A
11
RFO NG - Frame 2.50 m - 8 levels
N801595A
11
N501493A
18
MODF 2K-19” chassis, 3U
40026-515 30
12
N541182A
20,22,25
MODF 2K-Tray 19”, 1U, tube management
40040-502 30
12
MODF 2K Cover 3U, 7TE
40018-018 30
13
BPEO - 1.5 FDP Branch
N501747A
20
MODF 2K-Horizontal guide drawer, 19” , 1U
40036-521 30
13
BPEO - 1.5 FDP Drops
N501751A
20
MODF Module 2K/7TE-SM-SC/APC G652D
40395-514 45
13
N721162A
20,22,25
MODF Splice module 2K/8TE-24 splices
40395-517 30
13
MODF Module 2K/7TE-SM-SC G652D
40395-546 45
13
N721163A
20,22,25
80611329493
14
N721164A
20,22,25
80611329527
14
N721165A
20,22,25
N501675A
14
N721166A
20,22,25
BPEO S4 Wall support
N711660A
14
N721171A
20,22,25
BPEO-3 EVOL CDP 48 SLOT Splice protection closure CDP
N501494A
16
BPEO-3 EVOL EDP 48 SLOT Splice protection closure EDP
N501495A
16
N721172A
20,22,25
BPEO-3 EVOL BDP 48 SLOT Splice protection closure BDP
N501496A
16
N721162B
20,25
Earthing kit for BPE/O
N151064A
16,18
N721176A
20,25
BPEO Wall or Pole mounting kit BPEO sizes 2 and 3
N711440A
16,18
BPE/O Sewer type mounting kit sizes 2 and 3
N711546A
16,18
BPEO - 1 Evol EOC
N501487A
22
BPEO Wall mounting kit V2 for BPEO size 2 and 3
N711600A
16,18
BPEO - 1 Evol CDP
N501488A
22
ECAM Double D5-27 Double cable entry kit with
diameter from 5 to 27 mm
BPEO - 1 EDP
N501489A
22
N721131A
16,18
BPEO - 1 FDP Drops
N501714A
22
Coupling holder 6 x SC connectors for BPEO S1, S2, S3
N711604A
16,18,22
BPEO - 1 FDP Branch
N501719B
22
N721127A
16,18,20,22
BPE/O Pole 1 Wall or Pole mounting kit BPEO size 1
N711438A
22
BPE/O Wall and pole mounting kit V2 for BPEO size 1
N711599A
22
N501600A
23
N501604A
23
BPEO-0 EVOL Splice Protection Housing
N501741A
25
ECAM Single S4-27 for BPEO S4 - One single entry
D4 - 27
ECAM Double D4-27 for BPEO S4 - One double entry
D4 - 27
BPEO S4 - Dome Sleeve for 864 FO max - One double
entry D4 - 27 + 5 x single entries D4 - 27
ECAM Single S5-18 Single cable entry kit with
diameter from 5 to 18 mm
K7-1SLOT-6 Fibrlok™ 4 x 4 - 1-step Cassette equipped
with a 6 Fibrlok™ 4 x 4 support
K7-2SLOT-12 2-step Cassette for heat shrink fusion
splices equipped with a support for 12 fusion splices
and PLC splitter
K7-1SLOT-12 1-step Cassette for heat shrink fusion
splices equipped with support 12 fusion splices
K7-2SLOT-12 Fibrlok™ 2-step 4 x 4 Cassette equipped
with a 12 Fibrlok™ 4 x 4 support
K7-2SLOT-10 Fibrlok4 x 4 and splitter 2-step Cassette
equipped with a 10 Fibrlok™ 4 x 4 support
K7-1SLOT - For 9 fusion splices and a 4 x 4 type
PLC splitter
48
Description
BPEO-2 EVOL CDP 28 SLOT Splice protection housing
CDP
BPEO-2 EVOL EDP 28 SLOT Splice protection housing
EDP
BPEO-2 EVOL BDP 28 SLOT Splice protection housing
BDP
K7-1SLOT-2 x 6 fusion splices (twin-zone) designed for
fibre G657 (lot of 12 pcs)
Double D6-18 ECAM for cable entry kit Body for housing
double cable entry kits
ECAM Double ECAM D6-9 mm Sealing kit with
diameter from 6 to 9 mm
ECAM Double D9-12 mm Sealing kit with diameter
from 9 to 12 mm
ECAM Double D12-15 mm Sealing kit with diameter
from 12 to 15 mm
ECAM Double D15 to 18 mm Sealing kit with diameter
from 15 to 18 mm
Single ECAM S3-7 Single cable entry kit with diameter
from 3 to 7 mm
Single ECAM S3.5-9.5 Single cable entry kit with
diameter from 3.5 to 9.5 mm
ECAM Double D18 - D4,5/6 for cable entry kit Body
for housing double cable entry kits
ECAM Double D4,5-6 mm Sealing kit with diameter
from 4,5 to 6 mm
N541103A
16,18,20,22,25
N541104A
16,18,20,22,25
N541106A
16,18,20,22,25
Derivation closure OSSC 121T
N501425A
26
N541108A
16,18,20,22,25
Derivation closure OSLC 222
N501426A
26
N541110A
16,18,20,22,25
Derivation closure OSSC 122T
N501454A
26
Derivation closure OSC30
N501652A
26
N541113A
16,18,20,22,25
Empty micro-sleeve for passage cable diameter 4.2 mm
or 11 mm. Plugs on outlets
Micro-sleeve 24 for passage cable diameter 4.2 mm
or 11 mm. 2 off 4 x 2.5 mm outlets
Description
Reference No.
Page
Fibre Distribution Terminal PBO NG T1 Supplied without
cassette
N501733A
27
PBO Plastic mounting bracket (need 1)
N711608A
27
FTB-M
28
Base of building housing PBO S2 12 SLOT
N501659A
29
PBO Plastic fixing supports (need 2)
N711608A
29
537069
30
eDB² Accessory (Dropfix)
Contact 3M
30
eDB² Accessory Pack 1
Contact 3M
30
PBPO 24 NG Symetric - External drops immobilisation
N501758A
31
PBPO Protection Cover
N681288T
31,32
PBPO Kit backmount plate
N711833A
31,32
Empty FTB distribution housing
eDB² Base Assembly
PBPO/C NG Symetric
Wall outlet equipped with 4 connectors with flaps
and 2 pigtails
Wall outlet equipped with 4 flap connectors on 4fo
cable 25 m of which 2fo connect. SC/APC
Wall outlet equipped with 4 flap connectors on 4fo
cable 40 m of which 2fo connect. SC/APC
Wall outlet equipped with 2 flap connectors on 2fo
cable 25 m of which 2fo connect. SC/APC
Wall outlet equipped with 2 fl ap connectors on 2fo
cable 40 m of which 2fo connect. SC/APC
Description
Reference No.
Page
8700-PS/APC
40
8700-PS/UPC
40
Crimplok™ + SC/APC Connector Kit
8765-APC
41
Crimplok™ + SC/UPC Connector Kit
8765-UPC
41
2529
42
2559
42
2529-AS
42
Fibrlok 250 µm Angle Fiber Splice (4x4mm)
2540-AS
42
Fibrlok 250 µm Flat Fiber Splice (4x4mm)
2540-G
42
2559-C
42
Crimplok™ + Connector SC/APC, SM, 900 µm, (60ea)
with PS Tool
Crimplok™ + Connector SC/UPC, SM, 900 µm, (60ea)
with PS Tool
Fibrlok II Universal Flat Fiber Splice, 250 µm and 900 µm
(4 x 6 mm)
Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501,
2504-G and Fibrlok samples
Fibrlok II Angle Fiber Splice, 250 µm and 900 µm
(4 x 6 mm)
N501760A
32
Fibrlok Fiber Prep Kit (w/ Cleaving Tool CI-01A), 2501,
2504-G and Fibrlok samples
N501677A
34
FRP Splice Connector (Grey)
2569
43
FRP Splice Connector (Ivory)
2569
43
N501680A
34
N501681A
34
N501682A
34
N501683A
34
N501689A
34
N501762A
34
One Pass Mini Surface-Mount Wall Outlet, 2F
N501763A
34
One Pass Mini Surface-Mount POE Wall Cover
Wall Outlet 2 FO equipped with a flap connector
N501752A
35
One Pass Mini Planar Corners, 12 Corners Per Bag
ILU-PLN-12-IV
47
Wall Outlet Point equipped with 2 connectors with flaps
N501753A
35
One Pass Mini Mechanical Anchor, 12 Per Bag
ILU-ANCHOR12-IV
47
N501754A
35
One Pass Mini Exterior Corner Supports, Formed (Metal),
12 Per Bag
ILU-EXT-12
47
8686
36
VOL-0256-C
37
2565
39
8865
39
8800-APC/AS
39
Wall outlet equipped with 4 connectors with flaps
Wall outlet equipped with 4 flap connectors on 4fo
cable 25 m of which 4fo connect. SC/APC
Wall outlet equipped with 4 flap connectors on 4fo
cable 40 m of which 4fo connect. SC/APC
Wall Outlet 2FO equipped with 2 connectors with flaps
and 1 pigtail
Fibre Optic Wall Outlet 4 x SC simplex with Keystone Port
for RJ45 Jack
Fibre Optic Wall Outlet 2 x SC simplex with Keystone
Adpater and Dust Shutters
Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave
Tool
No Polish Connector Preparation Kit without Cleaver
SC/APC SM 9/125 µm NPC Connector 250/900 µm,
Angle Splice, incl. tool
SC/APC SM 9/125 µm NPC Connector 250/900 µm,
Flat Splice, incl. tool
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm
jacket and FRP, Angle Splice
SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm
jacket and FRP, Flat Splice
LC/APC SM 9/125 µm NPC Connector 250/900 µm,
Angle Splice, incl. tool
LC/APC SM 9/125 µm NPC Connector 250/900 µm,
Flat Splice, incl. tool
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm
jacket and FRP, Flat Splice
LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm
jacket and FRP, Angle Splice
No Polish Connector Preparation Kit with Cleaver
8800-APC/FS
8802-T/APC/
AS/1.6-3.0
8802-T/APC/
FS/1.6-3.0
39
39
39
ONE PASS MINI DUCT LSZH 300 ft NO TERM
ONE PASS MINI DUCT LSZH 300 ft 2 fibres NO TERM
ONE PASS MINI DUCT LSZH 300 ft 4 fbres NO TERM
One Pass Mini Surface-Mount Wall Outlet, 2F
One Pass Mini Bridge Strip 12.5” Long 60 Per Kit
One Pass Mini Duct Installation Tool
One Pass Mini Duct Flange Removal Tool
ILU-300-01000-LS
ILU-300-02000-LS
ILU-300-04000-LS
ILU-SM-WO02-SCA-IV
ILU-SM-WO-02SCU-IV
ILU-SM-POEWC-IV
ILU-BRIDGE125-60
ILU-DUCTINSTALL-TOOL
ILU-DUCTCHOMPER-TOOL
46
46
46
47
47
47
47
47
47
One Pass Mini Installation Tool Kit, ILU
ILU-TOOL-KIT
47
ILU Fiber Repair Kit
ILU-REPAIR-KIT
47
ILU Wall Surface Compatibility Test Kit
ILU-TEST-KIT
47
One Pass Surface-Mount Point-of-Entry Box
SM-POE-10-IV
47
SM-SMALLPOE-10-IV
47
8800-APC/AS
47
8800
47
One Pass Small Surface-Mount Point-of-Entry Box
3M™ No Polish Connector SC/APC SM Angle Splice
250/900
3M™ No Polish SC Connector SM Plug 250/900
(blue housing)
8830-APC/AS
39
8830-APC/FS
39
Fiber Optic Angle Cleave Kit with Angle Cleaver
2565
47
8832-APC/AS
39
Fiber Optic Angle Cleaver
2535
47
Fiber Optic Flat Cleaver
2534
47
8832-APC/FS
39
Optical Terminal Box with 2 SC adapters
N501688A
47
8865-C
39
Optical Terminal Box with 4 SC adapters
N501689A
47
49
Notes
50
Important Notice
The mounting and use of the 3M product described within this document assumes that the user has previous
experience of this type of product and that it will be assembled by a competent professional. Before any use
of this product it is recommended to complete some trials to validate the performance of the product within its
expected application.
All information and specification details contained within this document are inherent to this specific 3M
product and would not be applied to other products or environment. Any action or usage of this product made
in violation of this document is at the risk of the user.
Compliance to the information and specification relative to the 3M product contained within this document
does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance
to operational requirements especially in respect to the environment and usage of tools with this product must
be observed. The 3M Company (who cannot verify or control these elements) would not be held responsible for
the consequences of any violation of these rules which remain external to its decision and control.
Warranty conditions for 3M products are determined with the sales contract documents and with the
mandatory and applicable clause, excluding any other warranty or compensation.
Important Information
3
3M Telecommunications
Europe, Middle East & Africa
c/o 3M Deutschland GmbH
Carl-Schurz-Str. 1
D-41453 Neuss
Germany
Tel.:++49(0)2131/14-5999
Fax:++49(0)2131/14-5998
Internet:www.3MTelecommunications.com/eu
The details contained in this literature have been carefully prepared
from information available to 3M at the time of its production. However,
it is not intended to be relied upon for purposes of product specification
and you should contact your sales representative if specification
details are required. All questions of liability relating to 3M products are
governed by the selling 3M subsidiary’s Terms of Sale subject where
applicable to the prevailing law.
3M and Fibrlok are trademarks of the 3M company.
Printed in Germany.
© 3M Dr. Nr. 07-401-31800 Index c Revision 05.2014.
All rights reserved.