... when light connects architecture and humanity.
There is a moment ...
1
... when innovation inspires imagination.
Scale 1:1
3
... when technology transforms and design transcends.
5
... when performance is measured in degrees of comfort and control.
7
... when sophistication is ultimate simplicity.
9
That moment is ...
Scale 1:1
11
... when light connects architecture and humanity.
Fluxwerx creates innovative lighting products for the intersection of
architectural environments and human experience.
We synthesize industrial design, optical engineering and LED technology
with an obsessive attention to detail that delivers an optimal balance
between energy, atmosphere and occupant.
OPTICS
PRODUCTS
16
VIEW
DETAILS
20 PROFILE
34
TRANSOM
50
62
OPTICS
Simple is complicated. Invisible is innovation.
Anidolic optical structures disperse and mix light,
eliminating any visible images of the LED point
source and ensuring accurate and consistent color.
Transparent, vertical optics engineered specifically for LED sources are
integrated with minimalist design and architectural materials to create a
broad range of solutions with superior optical and energy performance.
Precise extraction elements refract and reflect
light, emitting high performance distributions
with exceptional optical control and efficacies.
17
VIEW
TRANSOM
Scale 1:1
SUSPENDED | GENERAL AREA LIGHTING
PROFILE
SUSPENDED | GENERAL AREA LIGHTING
70 Up | 30 Dn
40 Up | 60 Dn
10 Up | 90 Dn
100 Dn
RECESSED | GENERAL AREA LIGHTING
PROFILE VSI
SUSPENDED | VERTICAL SURFACE ILLUMINATION
2x2|2x4
100 Dn
1x4
100 Dn Asymmetric
19
VIEW
Good design is obvious. Great design is transparent.
21
VIEW
From horizontal to vertical. From fixture to fenestration.
23
25
70 Up | 30 Dn
Anodized aluminum. Precision extruded and machined.
BEST PRACTICES
10 Up | 90 Dn
ENVIRONMENT
PRODUCT
RUNS
DROP
SPACING
CEILING
LIGHT
ENERGY
Computer Lab 32 × 30
70 Up | 30 Dn
AA
24 W
3 runs@28'
18"
10 o.c.
3.6 : 1
40 fc
0.53 W/ft2
Music Room
32 × 30
70 Up | 30 Dn
AB
29 W
3 runs@28'
18"
10 o.c.
3.6 : 1
50 fc
0.63 W/ft2
Science Lab
32 × 30
70 Up | 30 Dn
AD
49 W
2 runs@28'
18"
15 o.c.
9.3 : 1
55 fc
0.71 W/ft2
Open Office
60 × 60
70 Up | 30 Dn
AA
24 W
6 runs@52'
18"
10 o.c.
2.7 : 1
45 fc
0.52 W/ft2
Open Office
60 × 60
70 Up | 30 Dn
AA
24 W
5 runs@52'
18"
12 o.c.
4.0 : 1
38 fc
0.43 W/ft2
Open Office
60 × 60
70 Up | 30 Dn
AB
29 W
5 runs@52'
18"
12 o.c.
4.0 : 1
48 fc
0.52 W/ft2
Open Office
60 × 60
70 Up | 30 Dn
AC
39 W
4 runs@52'
18"
15 o.c.
7.3 : 1
51 fc
0.56 W/ft2
Open Office
60 × 60
70 Up | 30 Dn
AD
49 W
20 runs@8'
18"
12 x 14
N/A
46 fc
0.54 W/ft2
Private Office
15 × 10
70 Up | 30 Dn
AC
39 W
1 run@12'
18"
N/A
N/A
41 fc
0.78 W/ft2
Call Center
60 × 60
70 Up | 30 Dn
AB
29 W
25 runs@8'
18"
12 x 12
N/A
35 fc
0.40 W/ft2
Call Center
60 × 60
70 Up | 30 Dn
AB
29 W
4 runs@52'
18"
14 o.c.
6.1 : 1
40 fc
0.42 W/ft2
27
29
SQUARE
RADIUS
View. Clearly changes the paradigm.
BEAM
CLEAR
ANODIZED
WHITE
POWDERCOAT
BLACK
POWDERCOAT
31
33
PROFILE
The best design is as little design as possible.
Scale 1:1
35
PROFILE
Nothing more to add. Nothing left to remove.
Nothing but light and space.
37
39
AREA LIGHTING
40 Up | 60 Dn
Anodized aluminum. Precision extruded and machined.
BEST PRACTICES
ENVIRONMENT
100 Dn
PRODUCT
RUNS
DROP
SPACING
CEILING
LIGHT
ENERGY
Computer Lab
32 × 30
40 up | 60 Dn
AA
24 W
9 runs@8'
18"
10 × 10
N/A
34 fc
0.45 W/ft2
Music Room
32 × 30
40 up | 60 Dn
AB
29 W
3 runs@28'
18"
10 o.c.
4.7 : 1
49 fc
0.63 W/ft2
Science Lab
32 × 30
40 up | 60 Dn
AD
49 W
2 runs@28'
18"
15 o.c.
7.5 : 1
54 fc
0.72 W/ft2
Call Center
60 × 60
40 up | 60 Dn
AA
24 W
5 runs@52'
18"
12 o.c.
5.0 : 1
37 fc
0.43 W/ft2
Open Office
60 × 60
40 up | 60 Dn
AB
29 W
6 runs@52'
18"
10 o.c.
3.5 : 1
54 fc
0.63 W/ft2
Open Office
60 × 60
40 up | 60 Dn
AD
49 W
4 runs@52'
18"
15 o.c.
7.2 : 1
57 fc
0.71 W/ft2
Open Office
60 × 60
100 Dn
BA
24 W
6 runs@52'
18"
10 o.c.
N/A
43 fc
0.52 W/ft2
41
43
VERTICAL SURFACES
Anodized aluminum. Precision extruded and machined.
100 Dn Symmetric
BEST PRACTICES
ENVIRONMENT
PRODUCT
PARAMETERS
LIGHT
UNIFORMITY
Whiteboard
48" H × 12'-0" L
VSI Asymmetric
AA 24 W
1 run@ 16'
12" Drop ; Setback 24"
35 vfc
1.9 : 1
Teaching Wall
48" H × 12'-0" L
VSI Asymmetric
AB 29 W
1 run@ 16'
12" Drop ; Setback 24"
43 vfc
1.9 : 1
Wall Washing
9'0" H × 32'0" L
VSI Asymmetric
AB 29 W
1 run@ 24'
12" Drop ; Setback 30"
32 vfc
3.3 : 1
K-7 Library
60" H Stack × 48" W Aisle
VSI Symmetric
BC
39 W
1 run@ 40'
Mounting 7'6" AFF
33 vfc
2.2 : 1
Public Library
72" H Stack × 72" W Aisle
VSI Symmetric
BC
39 W
1 run@ 40'
Mounting 7'6" AFF
34 vfc
1.5 : 1
College Library
84" H Stack × 60" W Aisle
VSI Symmetric
BD 49 W
1 run@ 40'
Mounting 8'0" AFF
43 vfc
2.1 : 1
Grocery Store
72" H Stack × 72" W Aisle
VSI Symmetric
BD 49 W
1 run@ 40'
Mounting 7'0" AFF
51 vfc
1.4 : 1
Retail
72" H Stack × 48" W Aisle
VSI Symmetric
BD 49 W
1 run@ 40'
Mounting 7'6" AFF
45 vfc
2.3 : 1
100 Dn Asymmetric
45
BEVEL
FLAT
Profile. Pure and simple. Through and through.
CLEAR
ANODIZED
WHITE
POWDERCOAT
BLACK
POWDERCOAT
47
49
TRANSOM
Light, materials, form and space are the elements. People are the reason.
51
TRANSOM
Inspired by architecture. Engineered for performance.
53
55
1x4
2 x 4 | 20 x 48
2 x 2 | 20 x 24
57
BEST PRACTICES
ENVIRONMENT
PRODUCT
QTY
SPACING
LIGHT
ENERGY
Library
40 × 30
1×4
B
39 W
20
8×8
42 fc
0.65 W/ft2
Private Office
12 × 10
1×4
C
49 W
2
8 o.c.
32 fc
0.82 W/ft2
Corridor
40 × 6
1×4
C
49 W
4
10 o.c.
23 fc
0.82 W/ft2
Open Office
60 × 60
2×2
A
29 W
49
8×8
36 fc
0.39 W/ft2
Open Office
60 × 60
2×2
B
39 W
49
8×8
45 fc
0.53 W/ft2
Computer Lab
32 × 30
2×2
B
39 W
12
8 × 10
31 fc
0.49 W/ft2
Classroom
32 × 30
2×2
C
49 W
12
8 × 10
38 fc
0.61 W/ft2
Open Office
60 × 60
2×2
C
49 W
36
10 × 10
37 fc
0.49 W/ft2
Private Office
12 × 10
2×2
C
49 W
2
8 o.c.
31 fc
0.82 W/ft2
Lunchroom
60 × 60
2×4
A
29 W
42
8 × 10
29 fc
0.34 W/ft2
Computer Lab
32 × 30
2×4
B
39 W
12
8 × 10
31 fc
0.49 W/ft2
Open Office
60 × 60
2×4
B
39 W
42
8 × 10
36 fc
0.46 W/ft2
Open Office
60 × 60
2×4
C
49 W
42
8 × 10
45 fc
0.57 W/ft2
Classroom
32 × 30
2×4
C
49 W
12
8 × 10
38 fc
0.61 W/ft2
Boardroom
46 × 24
2×4
C
49 W
8
10 × 12
26 fc
0.36 W/ft2
Open Office
60 × 60
20 × 48 C
49 W
36
10 × 10
37 fc
0.49 W/ft2
59
Transparent and adjustable optional daylight harvesting sensor.
61
DETAILS
63
QUALITY + COMMITMENT
Our integrated design approach uniquely synthesizes the latest LED technologies with precision optics and finely detailed
product architecture. Combined with advanced mechanical, electronic and thermal engineering, our innovative solutions
deliver an optimal balance of high performance lighting distributions with consistent color and exceptional system efficacy.
WARRANTY + CLAIMS
TESTING + APPROVAL
Our experienced team of industry professionals and
As part of design development and manufacturing,
strategic global supplier alliances support all products
all luminaires undergo extensive independent testing
with a 5 year system warranty on the LED light engine,
and inspection to ensure performance, quality,
driver, and all fixture components. In the unlikely event
reliability and longevity. LEDs are tested in accordance
of any workmanship issues or component failures
with IESNA LM80 and luminaires are tested to IESNA
within the warranty period,
LM79 by an independent NVLAP approved laboratory.
replacement components
As a final quality check,
or products will be supplied
every fixture is tested prior
and shipped to site along
to shipping. All products
with detailed instructions
are certified by UL and
for installation.
approved for use in the
USA and Canada.
COLOR + CONSISTENCY
LONGEVITY + LIFETIME
Color accuracy between products is within a 2-step
Based on IESNA LM80 test results and TM21
MacAdam ellipse (< 2 SDCM) and available in multiple
guidelines, as well as measured operating junction
color temperatures with high CRI and R9 values.
temperatures, our products typically maintain more
LEDs are selected using a proprietary binning algorithm
than 90% of their initial light output for more than
to ensure that color and lumen output of the final
60,000 hours of operation, well above the industry
luminaires are consistent and surpass industry
standard. To further guarantee a lifetime of superior
standard ANSI C78.377 specifications for chromaticity.
performance, we utilize only leading global vendors
Innovative design, optics and low operating
ensuring all products are built with the highest
temperatures ensure that color quality is maintained
quality components.
throughout the rated lifetime of the product.
65
Prewired and fully tested drivers are integrated with specialized mounting hardware, power feeds, suspension
cables, cords and canopy components. Designed for multiple orientations and to accommodate a variety of
ceiling conditions with simple installation methods and easy access for maintenance. Elements can be installed
in advance or with fixtures, for new construction or retrofit applications.
Certain options have limited or restricted compatibility with some product wiring selections. Due to continuous product improvements, specifications and dimensions are subject to change without notice. Consult fluxwerx.com for the most current technical information.
INTEGRATED DRIVERS
INTEGRATED
A
B
(D) Drywall
New construction or retrofit
Parallel or perpendicular orientation
Suitable for GWB thicknesses of ≤ 0.875" (22 mm)
(G) Grid
Mounts ON or OFF grid
Horizontal or vertical orientation
Suitable for grid heights of ≤ 1.75" (44 mm)
(S) Surface
Exposed conduit or recessed boxes
Parallel or perpendicular orientation
Suitable for inaccessible hard lid ceilings
120 - 277V
347V
Battery Pack
120 - 277V
347V
Battery Pack
120 - 277V
347V
Battery Pack
0-10V Dim
Lutron
50% BiLevel
0-10V Dim
Lutron
50% BiLevel
0-10V Dim
Lutron
50% BiLevel
INTEGRATED GRID MOUNTING
INTEGRATED DRYWALL MOUNTING
INTEGRATED SURFACE MOUNTING
INTEGRATE
A
INTEGRATED
GRID
MOUNTING
INTEGRATED
DRYWALL
MOUNTING INTEGRATED GRID
SURFACE
MOUNTING
A
A INTEGRATED
MOUNTING
DRYWALL
MOUNTING
INTEGRATED
SURFACE
MOUNTING
I
4.01
A MOUN
INTEGRATED GRID
MOUNTING
INTEGRATED DRYWALL MOUNTING
INTEGRATED
SURFACE
MOUNTING
INTEGRATED
remote
Detached Mounting Method
A
(102)
A
A
A
A
A
A
A
A
A
Detached
Mounting Method
Detached
Mounting Method
15.16
Detached Mounting Method
(385)
OR
OR
3.38
(86)
3.70
16.30
(39)
1.53
(39)
19.21
1.53
B
8.13
6.83
(206)
(173)
B
(94)
7
(488)
B
B
B
Shown above: Multivolt 120 - 277V
Standard | Dimming driver ON grid
B
INTEGRATED GRID MOUNTING
(ON or OFF
A Grid)
Detached Mounting Method
(537)
(178)
C
C
Options
B
Grid Detached Method
21.16
7
B
B
INTEGRATED DRYWALL MOUNTING
Drywall Retrofit Method
A
B
(178)
B
(414)
7
(178)
C
INTEGRATED
SURFACE MOUNTING
(R) Remote D
D
Exposed conduit or recessed boxes
Suitable for inaccessible hard lid ceilings
A
C
D
Requires 7.5" (190 mm) minimum
plenum depth for retrofit installation
B
Shown above: Multivolt 120 - 277V
Standard | Dimming driver OFF grid
D
B
120 - 277V
347V
Battery Pack
0-10V Dim
Lutron
50% BiLevel
67
IN
A
FUNCTION + FLEXIBILITY
Flexible mounting options provide easy installation for any ceiling condition.
Agnostic electrical-mechanical driver design allows simple integration with
any lighting control or building energy management system.
PRECISE + PREASSEMBLED
To minimize installation time and ensure precision alignment, all fixtures
arrive with end caps and power drop cords factory installed, and drivers are
prewired and tested for every circuit.
SEAMLESS + SIMPLE
Invisible design details require no electrical connections at fixture joints,
creating virtually seamless continuous runs that are simple to install and
speed construction.
69
VIEW
inches
(mm)
FINISHES
1.50
(38)
Clear Anodized
White
Black
ENDCAPS
4.50
(114)
Beam
Radius
Square
CEILING + MOUNTING
Drywall
Grid
Surface
Integrated Drivers
Scale 1:1
C
Due to continuing product improvements all specification and performance information is subject to change without notice. Consult fluxwerx.com for the most current technical data.
DIMENSIONS
SPECIFICATIONS
FAMILY
ENDCAP
OPTICAL DISTRIBUTION
VU1 View
B Beam
General
Area
Lighting
R Radius
CCT
A 70 Up | 30 Dn
A 24 W
35
B 10 Up | 90 Dn
B 29 W
40 4000 K
S Square
FINISH
3500 K
C 39 W
A Clear Anodized
B Black Powdercoat
W White Powdercoat
D 49 W
LENGTH
CEILING + MOUNTING INTEGRATION
04 4 ft
Integrated driver
with mounting,
power feed,
suspension +
canopy
08 8 ft
XX x ft*
Remote
LIGHT + ENERGY
* Specify run length in
nominal 4 ft increments
DRIVER
VOLTAGE
SUSPENSION
OPTIONS
D Drywall
B 50% Bi Level
M 120 - 277 V
03 ≤ 3 ft
G Grid
D 0-10 V Dim
3
06 ≤ 6 ft
A Alternative Wiring
- AV Presentation Switching
- EM/NL or 2 circuit modules
S Surface
L Lutron
12
B Battery Pack
R Remote
S Standard
347 V
≤ 12 ft
C Chicago Plenum
71
VIEW
CONSTRUCTION + MATERIALS
Anodized architectural grade extruded aluminum rails, joints and
endcaps; precision machined and factory preinstalled for seamless fit.
Clear anodized surface finish or powdercoated in white or black.
Anidolic optical structures with linear light extraction elements precision
injection molded in high transmittance clear acrylic lenses.
Long life mid-flux LED system optically and thermally designed to
maintain 90% of initial lumen output for more than 60,000 operating
hours (L90 > 60,000 h), as per TM21 guidelines.
Color accuracy between products is within a two step MacAdam ellipse
(< 2 SDCM ) and available in multiple correlated color temperatures (CCT)
with high R9 and color rendering index values (CRI > 80).
ELECTRICAL + MOUNTING
High efficiency multivolt drivers are factory prewired and integrated
with mounting and suspension components.
Flexible driver orientations and simple installation methods
accommodate most new construction or retrofit ceiling conditions.
Agnostic driver design for simple integration with any sensor,
lighting control, or building energy management system.
VOLTAGE
120 - 277 V or 347 V
POWER FACTOR
> 0.90
TOTAL HARMONIC DISTORTION
< 20%
BI LEVEL SWITCHING
50 / 100%
0 - 10 V DIMMING RANGE
5 - 100%
EM BATTERY PACK (OPTIONAL)
~ 2000 lm @ 90 min.
APPROVALS + TESTING
UL Listed (USA + Canada)
CCEA approved for Chicago plenum installation
IESNA LM79 (NVLAP)
IESNA LM80 (LED @10,000 h)
5 Year total system warranty
73
PROFILE
inches
FINISHES
(mm)
Clear Anodized
White
Black
3.25
(83)
ENDCAPS
3.10
(79)
Bevel
Flat
Scale 1:1
INTEGRATED DRYWALL MOUNTING
A
INTEGRATED GRID MOUNTING
INTEGRATED DRYWALL MOUNTING
A
A
Detached Mounting Method
INTEGRATED GRID MOUNTING
INTEGRATED DRYWALLGRID
MOUNTING MOUNTING
INTEGRATED
A
A
A
INTEGRATEDMOUNTING
remote MOUNTING
INTEGRATED SURFACE
INTEGRATED SURFACE MOUNTING
A
Detached Mounting Method
INTEGRATED SURFACE MOUNTING
Detached Mounting Method
A
INTEGRATED
MOUNTING
CEILING
+DRYWALL
MOUNTING
A
INTEGRATED
GRID MOUNTING
B
B
A
A
2.35
INTEGRATED SURFACE MOUNTING
A
Detached Mounting Method
(60)
C
B
B
B
Drywall
B
B
D
B
Grid
B
Surface
A
INTEGRATED remote MOUNTING
A
SPECIFICATIONS
INTEGRATED remote MOUNTING
A
AINTEGRATED remote MOUNTING
Due to continuing product improvements all specification and performance information is subject to change without notice. Consult fluxwerx.com for the most current technical data.
DIMENSIONS
FAMILY
ENDCAP
OPTICAL DISTRIBUTION
PR1 Profile
B Bevel
General
Area
Lighting
F Flat
LIGHT + ENERGY
CCT
FINISH
A 40 Up | 60 Dn
A 24 W
35
B 100 Dn
B 29 W
40 4000 K
3500 K
C 39 W
A Clear Anodized
B Black Powdercoat
W White Powdercoat
D 49 W
C
Integrated
Drivers
B
C
B
D
C
LENGTH
CEILING + MOUNTING INTEGRATION
04 4 ft
Integrated driver
with mounting,
power feed,
suspension +
canopy
08 8 ft
XX x ft*
B
Remote
D
D
* Specify run length in
nominal 4 ft increments
DRIVER
VOLTAGE
SUSPENSION
OPTIONS
D Drywall
B 50% Bi Level
M 120 - 277 V
03 ≤ 3 ft
G Grid
D 0-10 V Dim
3
06 ≤ 6 ft
A Alternative Wiring
- AV Presentation Switching
- EM/NL or 2 circuit modules
S Surface
L Lutron
12
B Battery Pack
R Remote
S Standard
347 V
≤ 12 ft
C Chicago Plenum
75
PROFILE VSI
inches
FINISHES
(mm)
Clear Anodized
White
Black
3.25
(83)
ENDCAPS
3.10
(79)
Bevel
Flat
Scale 1:1
INTEGRATED DRYWALL MOUNTING
A
INTEGRATED GRID MOUNTING
INTEGRATED DRYWALL MOUNTING
A
A
Detached Mounting Method
INTEGRATED GRID MOUNTING
INTEGRATED DRYWALLGRID
MOUNTING MOUNTING
INTEGRATED
A
A
A
INTEGRATEDMOUNTING
remote MOUNTING
INTEGRATED SURFACE
INTEGRATED SURFACE MOUNTING
A
Detached Mounting Method
INTEGRATED SURFACE MOUNTING
Detached Mounting Method
A
INTEGRATED
MOUNTING
CEILING
+DRYWALL
MOUNTING
A
INTEGRATED
GRID MOUNTING
B
B
A
A
2.35
INTEGRATED SURFACE MOUNTING
A
Detached Mounting Method
(60)
C
B
B
B
Drywall
B
B
D
B
Grid
B
Surface
A
INTEGRATED remote MOUNTING
A
SPECIFICATIONS
INTEGRATED remote MOUNTING
A
AINTEGRATED remote MOUNTING
Due to continuing product improvements all specification and performance information is subject to change without notice. Consult fluxwerx.com for the most current technical data.
DIMENSIONS
FAMILY
ENDCAP
PR2 Profile VSI
B Bevel
F Flat
OPTICAL DISTRIBUTION
A 100 Dn Asymmetric
Vertical
Surface
Illumination
B 100 Dn Symmetric
LIGHT + ENERGY
CCT
FINISH
A 24 W
35
B 29 W
40 4000 K
3500 K
C 39 W
A Clear Anodized
B Black Powdercoat
W White Powdercoat
D 49 W
C
Integrated
Drivers
B
C
B
D
C
LENGTH
CEILING + MOUNTING INTEGRATION
04 4 ft
Integrated driver
with mounting,
power feed,
suspension +
canopy
08 8 ft
XX x ft*
B
Remote
D
D
* Specify run length in
nominal 4 ft increments
DRIVER
VOLTAGE
SUSPENSION
OPTIONS
D Drywall
B 50% Bi Level
M 120 - 277 V
03 ≤ 3 ft
G Grid
D 0-10 V Dim
3
06 ≤ 6 ft
A Alternative Wiring
- AV Presentation Switching
- EM/NL or 2 circuit modules
S Surface
L Lutron
12
B Battery Pack
R Remote
S Standard
347 V
≤ 12 ft
C Chicago Plenum
77
PROFILE
CONSTRUCTION + MATERIALS
Anodized architectural grade extruded aluminum rails, joints and
endcaps; precision machined and factory preinstalled for seamless fit.
Clear anodized surface finish or powdercoated in white or black.
Anidolic optical structures with linear light extraction elements precision
injection molded in high transmittance clear acrylic lenses.
Long life mid-flux LED system optically and thermally designed to
maintain 90% of initial lumen output for more than 60,000 operating
hours (L90 > 60,000 h), as per TM21 guidelines.
Color accuracy between products is within a two step MacAdam ellipse
(< 2 SDCM ) and available in multiple correlated color temperatures (CCT)
with high R9 and color rendering index values (CRI > 80).
ELECTRICAL + MOUNTING
High efficiency multivolt drivers are factory prewired and integrated with
mounting and suspension components.
Flexible driver orientations and simple installation methods
accommodate most new construction or retrofit ceiling conditions.
Agnostic driver design for simple integration with any sensor, lighting
control, or building energy management system.
VOLTAGE
120 - 277 V or 347 V
POWER FACTOR
> 0.90
TOTAL HARMONIC DISTORTION
< 20%
BI LEVEL SWITCHING
50 / 100%
0 - 10 V DIMMING RANGE
5 - 100%
EM BATTERY PACK (OPTIONAL)
~ 2000 lm @ 90 min.
APPROVALS + TESTING
UL Listed (USA + Canada)
CCEA approved for Chicago plenum installation
IESNA LM79 (NVLAP)
IESNA LM80 (LED @10,000 h)
5 Year total system warranty
79
TRANSOM
(mm)
2X2 | 2X4
4.50
LINE LINE WEIGHT MIN 0.25 pt. - MAX 0.5 pt.
LINE LINE WEIGHT MIN 0.25 pt. - MAX 0.5 pt.
*may change due to scale /
resize
1X4
2X4
1 XX4
20
1X4
(114)
AIL
FLAT GRID DETAIL
(303)
2 X 42 X 4
FLANGE
1X4
MIN MIN
0.250.25
pt. - pt.
MAX
0.5 pt.
- MAX
0.5 pt.
*may*may
change
due due
to scale
/ /
change
to scale
20.00
resize
resize
(508)
12.00
SLOT GRID DETAIL
*may change due to scale /
resize 24.00
LINE LINE WEIGHT (607)
MIN 0.25 pt. - MAX 0.5 pt.
2X4
*may change due to scale /
20 X 24 | 20 X 48
resize
LINELINE
LINELINE
WEIGHT
- WEIGHT
20 X
4.50
IL
(114)
2X4
FLANGE
20 X20 X
*may change due to scale /
resize
2X4
OPTIONS
1 X 41 X 4
LINE LINE WEIGHT MIN 0.25 pt. - MAX 0.5 pt.
CEILING INTEGRATION
SLOT GRID DETAIL
SLOTSLOT
GRIDGRID
DETAIL
DETAIL
1X4
20 X
FLAT GRID DETAIL
FLANGE
FLATFLAT
GRIDGRID
DETAIL
DETAIL
Air Return
Flat Grid
20 X
SPECIFICATIONS
1X4
FAMILY
SIZE
X
LIGHT +20
ENERGY
CCT
DRIVER
VOLTAGE
OPTIONS
TR1 Transom
14 1 x 4
A 29 W
35 3500 K
B 50% Bi Level
M 120 - 277 V
A Air Return
22 2 x 2
B 39 W
40 4000 K
D 0 - 10 V Dim
3
B Battery Pack
24 2 x 4
C 49 W
52 20 x 24
54 20 x 48
347 V
L Lutron
C Chicago Plenum
S Standard
D Daylight Sensor
F Flex Whip
K Drywall Flange Kit
SLOT GRID DETAIL
FLAT GRID DETAIL
SLOT GRID DETAIL
Daylight Sensor
Due to continuing product improvements all specification and performance information is subject to change without notice. Consult fluxwerx.com for the most current technical data.
inches
DIMENSIONS
Slot Grid
FLANGE
FLANGE
FLANGE
Drywall Flange Kit
FLAT GRID DETAIL
81
FLANGE
TRANSOM
CONSTRUCTION + MATERIALS
Clear anodized architectural grade extruded aluminum optical rail.
Anidolic optical structures with linear light extraction elements
precision injection molded in high transmittance clear acrylic lenses.
Die formed cold rolled steel housing with integral restraint tabs and
tie-offs. Extruded aluminum heat sink. Finished in high reflectance
diffuse white powdercoat. Options for air return and drywall flanges.
Long life mid-flux LED system optically and thermally designed to
maintain 90% of initial lumen output for more than 60,000 operating
hours (L90 > 60,000 h), as per TM21 guidelines.
Color accuracy between products is within a two step MacAdam ellipse
(< 2 SDCM ) and available in multiple correlated color temperatures (CCT)
with high R9 and color rendering index values (CRI > 80).
ELECTRICAL + MOUNTING
Highly efficiency integral multivolt drivers with quick disconnects are
factory prewired for all circuits (including integral BP with test switch).
Options for Lutron L3D drivers and 6’ flex whips installed.
Integral transparent and adjustable daylight harvesting sensor for use
with 0 - 10 V controls.
Agnostic driver design for simple integration with any sensor, lighting
control, or building energy management system.
VOLTAGE
120 - 277 V or 347 V
POWER FACTOR
> 0.90
TOTAL HARMONIC DISTORTION
< 20%
BI LEVEL SWITCHING
50 / 100%
0 - 10 V DIMMING RANGE
5 - 100%
EM BATTERY PACK (OPTIONAL)
~ 2000 lm @ 90 min.
APPROVALS + TESTING
UL Listed (USA + Canada)
IC Rated
CCEA approved for Chicago plenum installation
IESNA LM79 (NVLAP)
IESNA LM80 (LED @10,000 h)
5 Year total system warranty
83
... when light connects architecture and humanity.