Power Factor Correction Capacitors Type LKT E337088 Features that matter: ■ Handles continuous current up to 2.25 (60 Hz) / 2.7 (50 Hz) times rated current ■ Withstands inrush current up to 375 (60 Hz) / 450 (50 Hz) times rated current ■ Self-healing type, segmented film techno ogy plus overpressure disconnector ■ Environment-friendly, dry type ■ CO2 emission reduction ■ Saves energy costs It‘s all about saving your money! Power Factor Correction Capacitors Type LKT Therefore FRAKO designs its capacitors as follows: General Features FRAKO Power Factor Correction Capacitors utilize unique advanced technology and incorporate our exclusive triple safety feature. FRAKO is the first power capacitor manufacturer to succeed in combining segmented capacitor film with self-healing and over-pressure disconnection. This exclusive manufacturing technique significantly increases the reliability of capacitors in power factor and filter applications The capacitors are compliant with: ■ UL 810 (up to 600 VAC, 68 °C ambient) ■ CSA C22.2 No. 190 (up to 600 VAC, 46 °C ambient) ■ IEC 60831 (up to 800 VAC, 68 °C ambient) ■ Maximum continuous current up to 2.25 (60 Hz) / 2.7 (50 Hz) times rated current ■ Withstand inrush current up to 375 (60 Hz) / 450 (50 Hz) times rated current Highest Durability FRAKO capacitors have earned a reputation for superior quality, high reliability and long life expectancy. This is assured by our conservative approach to capacitor design plus skillful manufacturing processes and in-process verification testing. FRAKO sets a new standard for capacitor manufacturing. Exceeds Industry Standards Technical Features For the operation of Power Factor Correction Capacitors three aspects are of utmost importance: ■ High current capability ■ Long life expectancy ■ Triple safety features High Current Capability In electrical systems containing harmonic producing loads, power factor capacitors must be capable of carrying additional current due to the system harmonics. Even without resonance, harmonics will increase capacitor terminal voltage and increase capacitor current, which can further stress a capacitor making it necessary for a high current capability. If, for example, the 11th harmonic is present with 8% of the rated system voltage, then the rms value of the rated voltage is only slightly increased (about 0.3%), but the current in the capacitor will exceed its rated value by 33%. It becomes clear that the ability of a capacitor to withstand excessive current is much more important than the ability to withstand excessive voltage. Capacitor current 2 Our specifications for capacitors exceed all known industry standards and FRAKO capacitors surpass the requirements of UL, CSA and EN/IEC standards. Additional quality tests following each individual manufacturing step confirm an outstanding manufacturing quality. Through our unique manufacturing process, FRAKO achieves a world leading capacitor of the highest durability. Exclusive Manufacturing Process for long life For example, our consistently low power loss throughout the life of the capacitor, is achieved by our use of a proprietary mineral filler and stabilizer which can permanently avoid partial discharges within the dielectric material. Our vacuum drying process takes place under temperature controlled conditions for several days and eliminates the possibility of humidity within the capacitor - which if present would accelerate the aging process of a capacitor (reducing capacitor life). This process is an extra effort made by FRAKO but pays off for our customers with a longer life expectancy. Our production processes assure that quality and reliability are built into every capacitor, and this is confirmed by our verification testing Power Factor Correction Capacitors Type LKT Safety Features Over-Voltage Capability FRAKO Power Factor Correction Capacitors offer our exclusive Triple Safety feature: ■ Self-healing at over-voltage ■ Segmented film increase capacitor integrity and life expectancy by removing (electrically) small segments of film which have been damaged e. g. in the unlikel event of a failing self-healing process ■ Our patented over-pressure disconnector system assures safe and quick removal of capacitors from the electrical circuit at the end of their life or under a severe overload condition FRAKO Power Factor Correction Capacitors have an over-voltage capability that meets the requirements of EN 60831-1 and -2, IEC 60831-1 and -2, and surpasses the requirements of UL 810: Rated voltage [VAC] 240 300 400 440 480 500 525 600 8 hours daily 264 330 440 484 528 550 578 660 30 min. daily 276 345 460 506 552 575 604 690 5 min. daily 288 360 480 528 576 600 630 720 1 min. daily 312 390 520 572 624 650 683 780 Over-voltage [VAC] Further ratings for IEC only: Rated voltage [VAC] 690 800 8 hours daily 759 880 30 min. daily 793.5 920 5 min. daily 828 960 1 min. daily 897 1040 Over-voltage [VAC] Self-healing segmented capacitor fil Application Patent No. 102005045978 FRAKO capacitors are recommended for use in fixe or automatic power factor correction systems as well as harmonic filters. FRAKO holds system registration certificates for ISO 9001 (quality system), ISO 14001 (environmental management system) and ISO 50001 (energy management system). The principle of the overpressure disconnector To verify proper functioning of all internal safety systems, FRAKO regularly draws sample capacitors from the production line and performs multiple tests to confir proper operation of the safety system and to assure our outstanding quality is achieved in every capacitor. Mechanical Construction Cylindrical aluminum case with mounting stud M12 ×12, low loss self-healing dielectric made from segmented metallized polypropylene film. Filled with a dry type PCBfree, flame inhibiting, mineral filler with adhesive stabilizer and integrated mechanical overpressure disconnector. Discharge resistors are permanently connected at the capacitor terminals. Our patented fast connecting terminal, available as an option, minimizes wiring time, protects against direct contact with live terminals and meets the requirements of protection class IP20. 3 Power Factor Correction Capacitors Type LKT Design Discharging after Disconnection FRAKO specializes in the production of three phase capacitors which are available in a wide variety of ratings to meet various international requirements. Our additional offerings include single phase capacitors and medium voltage capacitors. Please contact our company for more information. Ratings ■ UL/CSA: 0.9 - 30 kvar (60 Hz); 208 - 600 VAC ■ IEC: 0.9 - 30.9 kvar (60 Hz); 208 - 800 VAC ■ UL/CSA: 0.7 - 25 kvar (50 Hz); 208 -600 VAC ■ IEC: 0.7 - 25.7 kvar (50 Hz); 208 -800 VAC In accordance with the National Electrical Code (NFPA 70, Article 460), Canadian Electrical Code (C22.2 No. 190M1985) and IEC 60831, all FRAKO capacitors have integrated discharge resistors that guarantee terminal voltage will discharge to 50 V or less within one minute after the capacitor is disconnected from the power source. Accessories: Fast Connecting Terminal for FRAKO Power Factor Correction Capacitors All FRAKO capacitors are available with an optional fast connecting terminal. This maintenance free, patented terminal saves wiring time and assures secure connection of capacitor wiring and maintains permanent connection for the duration of the capacitor life. Other ratings upon request. Article-No. Description Type Maximum Fault Current: 10,000 amps 31-08005 Plug-in type fast connecting terminal for capacitors with ∅ 85 mm, 3-phase AKD 30/3 31-08004 Plug-in type fast connecting terminal for capacitors with ∅ 85 mm, single phase AKD 30/1 Capacitance Tolerance - 5% / + 5% (Available to - 1% / + 1%) Power Loss Less than 0.5 W / kvar when measured at the connecting terminal (including discharge resistor). About 0.2 W/ kvar dielectric losses. Ambient Temperature ■ UL/IEC: - 40 °C up to + 68 °C (- 40 °F up to + 154 °F) ■ CSA: - 40 °C up to + 46 °C (- 40 °F up to + 114.8 °F) Plug-in type fast connecting terminal for capacitors with ∅85 mm Type: AKD 30/3 Article-No.: 31-08005 4 Power Factor Correction Capacitors Type LKT h 16 16 h 35.0 17.0 Dimensions M12 M12 Capacitors with d = 85 mm (3.35 in) diameter Capacitors with d = 85 mm (3.35 in) diameter for connection with flat cable plu 9.5 × 1.2 mm (0.38 × 0.05 in) Fast connecting terminal AKD 30/3 6 AWG 16 mm2 (0.0248 in2) Height (h) varies by capacitor rating (see page 8-15 for h dimensions) 5 Technical Data Technical Data Basic Capacitor Standard Capacitor Premium Capacitor operated with DL-specificatio operated with DP-specification* LKT…-DL60 Type LKT…-DB60 LKT…-DP60 LKT…-DL60 Rated reactive power 1.8…30 kvar (60 Hz) 0.9…30 kvar (60 Hz) 1.8…25 kvar (60 Hz) 1.5…25 kvar (50 Hz) 0.7…25 kvar (50 Hz) Rated voltage 208…525 V UL ratings: 208…600 V 208…525 V IEC ratings: 208…800 V UL ratings: 208…600 V 208…525 V IEC ratings: 208…615 V Rated frequency 60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filter 60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filter 60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filter 60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filters 60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filter Maximum overcurrent capability (at rated voltage) 1.25 × lN (60 Hz) 1.5 × lN (60 Hz) 1.8 × lN (60 Hz) 1.65 × lN (60 Hz) 2.25 × lN (60 Hz) 1.5 × lN (50 Hz) 1.8 × lN (50 Hz) 2.2 × lN (50 Hz) 2.0 × lN (50 Hz) 2.7 × lN (50 Hz) Maximum inrush current capability (at rated voltage) 167 × lN (60 Hz) 208 × lN (60 Hz) 250 × lN (60 Hz) 250 × lN (60 Hz) 375 × lN (60 Hz) 200 × lN (50 Hz) 250 × lN (50 Hz) 300 × lN (50 Hz) 300 × lN (50 Hz) 450 × lN (50 Hz) Ambient temperature 1) -25 ºC up to class D (-13 ºF up to class D) -40 ºC up to +60 ºC (-40 ºF up to +140 ºF) -40 ºC up to +65 ºC (-40 ºF up to +149 ºF) -40 ºC up to +60 ºC (-40 ºF up to +140 ºF) -40 ºC up to +68 ºC (-40 ºF up to +154 ºF) Maximum case temperature 70 ºC (158 ºF) 75 ºC (167 ºF) 75 ºC (167 ºF) 75 ºC (167 ºF) 75 ºC (167 ºF) Dielectric power loss 0.2 W/kvar 0.2 W/kvar 0.2 W/kvar 0.2 W/kvar 0.2 W/kvar Power loss including discharge resistors ≤ 0.5 W/kvar ≤ 0.5 W/kvar ≤ 0.5 W/kvar ≤ 0.5 W/kvar ≤ 0.5 W/kvar Test voltage (terminal terminal) 2.15 × UN for 2 s 2.15 × UN for 2 s 2.15 × UN for 2 s 2.15 × UN for 2 s 2.15 × UN for 2 s 1.85 × UN for 18 s 1.85 × UN for 18 s 1.85 × UN for 18 s 1.85 × UN for 18 s 1.85 × UN for 18 s Test voltage (terminal - case) 3,900 V, 2 s 3,900 V, 2 s 3,900 V, 2 s 3,900 V, 2 s 3,900 V, 2 s Mean life expectancy 100,000 h. 130,000 h. 170,000 h. 130,000 h. 200,000 h. Maximum humidity 95% relative humidity 95% relative humidity 95% relative humidity 95% relative humidity 95% relative humidity Maximum altitude 4,000 m (13,124 ft) 4,000 m (13,124 ft) 4,000 m (13,124 ft) 4,000 m (13,124 ft) 4,000 m (13,124 ft) Number of annual switching operations 20,000 40,000 60,000 60,000 100,000 Discharging level in 60 s ≤ 50 V ≤ 50 V ≤ 50 V ≤ 50 V ≤ 50 V 1) CSA compliance up to +46 ºC (114.8 ºF) maximum Please note that the DP values in the chart are marked with * 2) IEC ratings up to 30.9 kvar (60 Hz) / 25.7 kvar (50 Hz) LKT…-HD60 1.8…29.9 kvar (60 Hz) 2) 3.2…21.6 kvar (60 Hz) 1.5…20.8 kvar (50 Hz) 1.5…24.9 kvar (50 Hz) 2) 2.7…18 kvar (50 Hz) Generally, DL-type capacitors can also be operated at higher voltages with the DP-type specification 6 Heavy Duty Capacitor Technical Data Basic Capacitor Standard Capacitor Tightening torque for aluminium mounting screw (approx.) 15 Nm (133 in-lbs) 15 Nm (133 in-lbs) 15 Nm (133 in-lbs) 15 Nm (133 in-lbs) 15 Nm (133 in-lbs) Networks with higher harmonic levels and/ or high ambient temperature Demanding networks (i.e. networks with very high harmonic levels and/or very high ambient temperature) Networks with higher harmonic levels and/ or high ambient temperature Extreme demanding network- and ambient conditions Recommended for Networks with low harmonic content and normal ambient temperature Premium Capacitor Heavy Duty Capacitor 1) CSA compliance up to +46 ºC (114.8 ºF) maximum Generally, DL-type capacitors can also be operated at higher voltages with the DP-type specification Please note that the DP values in the chart are marked with * 2) IEC ratings up to 30.9 kvar (60 Hz) / 25.7 kvar (50 Hz) Temperature class D admissible ambient temperature maximum mean over 24 h highest mean over 1 year 55ºC (131 ºF) 45ºC (113 ºF) 35ºC (95 ºF) 7 Power Factor Correction Capacitors (three-phase) Type LKT…-DP60 for 60 Hz Standard Capacitors (three-phase) 10 570 V 600 V 30-400-DP60 85 × 278 3 × 165.8 31-10655 8.1 9.9 10.8 16.9 30.0 12-440-DP60 85 × 163 3 × 54.8 31-10656 2.7 3.3 3.6 5.6 9.9 10.7 12.0 15-440-DP60 85 × 215 3 × 68.5 31-10657 3.4 4.1 4.5 7.0 12.4 13.3 15.0 24-440-DP60 85 × 278 3 × 109.6 31-10658 5.4 6.6 7.1 11.2 19.8 21.4 24.0 30-440-DP60 85 × 278 3 × 137.0 31-10659 6.7 8.2 8.9 13.9 24.8 26.7 30.0 10-480-DP60 85 × 163 3 × 38.4 31-10634 1.9 2.3 2.5 3.9 6.9 7.5 8.4 9.2 10.0 12.5-480-DP60 85 × 163 3 × 48 31-10635 2.3 2.9 3.1 4.9 8.7 9.3 10.5 11.5 12.5 20-480-DP60 85 × 215 3 × 76.8 31-10636 3.8 4.6 5.0 7.8 13.9 15.0 16.8 18.4 20.0 25-480-DP60 85 × 278 3 × 95.9 31-10637 4.7 5.7 6.3 9.8 17.4 18.7 21.0 23.0 25.0 11.25-525-DP60 85 × 163 3 × 36.1 31-10638 1.8 2.2 2.4 3.7 6.5 7.0 7.9 8.6 9.4 11.25 14-525-DP60 85 × 215 3 × 44.9 31-10639 2.2 2.7 2.9 4.6 8.1 8.8 9.8 10.7 11.7 14.0 22.5-525-DP60 85 × 278 3 × 72.2 31-10640 3.5 4.3 4.7 7.3 13.1 14.1 15.8 17.3 18.8 22.5 28-525-DP60 85 × 278 3 × 89.8 31-10641 4.4 5.4 5.9 9.1 16.3 17.5 19.7 21.5 23.4 28.0 10-600-DP60 85 × 215 3 × 24.6 31-10642 1.2 1.5 1.6 2.5 4.4 4.8 5.4 5.9 6.4 7.7 9.0 10.0 12.5-600-DP60 85 × 215 3 × 30.7 31-10643 1.5 1.8 2.0 3.1 5.6 6.0 6.7 7.3 8.0 9.6 11.3 12.5 20-600-DP60 85 × 278 3 × 49.1 31-10644 2.4 2.9 3.2 5.0 8.9 9.6 10.8 11.8 12.8 15.3 18.1 20.0 25-600-DP60 85 × 320 3 × 61.4 31-10645 3.0 3.7 4.0 6.3 11.1 12.0 13.4 14.7 16.0 19.1 22.6 25.0 12.5-690-DP60 85 × 215 3 × 23.2 31-10646 1.1 1.4 1.5 2.4 4.2 4.5 5.1 5.6 6.0 7.2 8.5 9.5 15-690-DP60 85 × 215 3 × 27.9 31-10647 1.4 1.7 1.8 2.8 5.0 5.4 6.1 6.7 7.3 8.7 10.2 11.3 20-690-DP60 85 × 215 3 × 37.1 31-10648 1.8 2.2 2.4 3.8 6.7 7.2 8.1 8.9 9.7 11.6 13.7 15.1 25-690-DP60 85 × 278 3 × 46.4 31-10649 2.3 2.8 3.0 4.7 8.4 9.0 10.2 11.1 12.1 14.5 17.1 18.9 30-690-DP60 85 × 320 3 × 55.7 31-10650 2.7 3.3 3.6 5.7 10.1 10.9 12.2 13.3 14.5 17.4 20.5 22.7 12.6-800-DP60 85 × 215 3 × 17.4 31-10661 0.9 1.0 1.1 1.8 3.2 3.4 3.8 4.2 4.5 5.4 6.4 7.1 16-800-DP60 85 × 215 3 × 22.1 31-10662 1.1 1.3 1.4 2.3 4.0 4.3 4.8 5.3 5.8 6.9 8.1 9.0 25.2-800-DP60 85 × 278 3 × 34.8 31-10663 1.7 2.1 2.3 3.5 6.3 6.8 7.6 8.3 9.1 10.9 12.8 14.2 31-10629 7.5 9.2 10.0 12.5-240-DP60 85 × 215 3 × 191.9 31-10630 9.4 11.5 12.5 20-240-DP60 85 × 278 3 × 307.0 31-10631 15.0 18.4 20.0 15-300-DP60 85 × 163 3 × 147.4 31-10632 7.2 8.8 9.6 15.0 18-300-DP60 85 × 215 3 × 176.8 31-10633 8.7 10.6 11.5 18.0 12-400-DP60 85 × 163 3 × 66.3 31-10652 3.2 4.0 4.3 6.8 12.0 15-400-DP60 85 × 215 3 × 82.9 31-10653 4.1 5.0 5.4 8.4 15.0 24-400-DP60 85 × 278 3 × 132.6 31-10654 6.5 7.9 8.6 13.5 24.0 525 V 480 V 85 × 163 3 × 153.5 460 V 10-240-DP60 440 V µF 415 V mm 400 V LKT ... Rated Reactive Power in kvar at Rated Voltage 60Hz 300 V Capacitance ArticleNo. 240 V Diam. × height 230 V Type 208 V Capacitor Power Factor Correction Capacitors (three-phase) Type LKT…-DP60 for 50 Hz Standard Capacitors (three-phase) 7.7 8.33 9.6 10.4 8.9 10.0 10.3 11.1 12.5 16.5 17.8 20.0 11.6 20.7 22.2 25.0 3.2 5.8 6.2 7.0 7.7 8.3 2.6 4.1 7.2 7.8 8.8 9.6 10.4 3.8 4.2 6.5 11.6 12.5 14.0 15.3 16.7 4.8 5.2 8.1 14.5 15.6 17.5 19.1 20.8 1.5 1.8 2.0 3.1 5.4 5.9 6.6 7.2 7.8 9.4 1.8 2.2 2.4 3.8 6.8 7.3 8.2 9.0 9.8 11.7 31-10640 3.0 3.6 3.9 6.1 10.9 11.7 13.2 14.4 15.7 18.8 31-10641 3.7 4.5 4.9 7.6 13.5 14.6 16.4 17.9 19.5 23.3 85 × 215 3 × 24.6 31-10642 1.0 1.2 1.3 2.1 3.7 4.0 4.5 4.9 5.3 6.4 7.5 8.3 85 × 215 3 × 30.7 31-10643 1.2 1.5 1.7 2.6 4.6 5.0 5.6 6.1 6.7 8.0 9.4 10.4 20-600-DP60 85 × 278 3 × 49.1 31-10644 2.0 2.5 2.7 4.2 7.4 8.0 9.0 9.8 10.7 12.8 15.0 16.7 25-600-DP60 85 × 320 3 × 61.4 31-10645 2.5 3.1 3.3 5.2 9.2 10.0 11.2 12.2 13.3 16.0 18.8 20.8 12.5-690-DP60 85 × 215 3 × 23.2 31-10646 0.9 1.2 1.3 2.0 3.5 3.8 4.2 4.6 5.0 6.0 7.1 7.9 15-690-DP60 85 × 215 3 × 27.9 31-10647 1.1 1.4 1.5 2.4 4.2 4.5 5.1 5.6 6.0 7.2 8.5 9.5 20-690-DP60 85 × 215 3 × 37.1 31-10648 1.5 1.9 2.0 3.2 5.6 6.0 6.8 7.4 8.1 9.7 11.4 12.6 25-690-DP60 85 × 278 3 × 46.4 31-10649 1.9 2.3 2.5 3.9 7.0 7.5 8.5 9.2 10.1 12.1 14.2 15.8 30-690-DP60 85 × 320 3 × 55.7 31-10650 2.3 2.8 3.0 4.7 8.4 9.0 10.2 11.1 12.1 14.5 17.1 18.9 12.6-800-DP60 85 × 215 3 × 17.4 31-10661 0.7 0.9 0.9 1.5 2.6 2.8 3.2 3.5 3.8 4.5 5.3 5.9 16-800-DP60 85 × 215 3 × 22.1 31-10662 0.9 1.1 1.2 1.9 3.3 3.6 4.0 4.4 4.8 5.7 6.8 7.5 25.2-800-DP60 85 × 278 3 × 34.8 31-10663 1.4 1.7 1.9 3.0 5.3 5.7 6.4 6.9 7.6 9.0 10.7 11.8 20-240-DP60 85 × 278 3 × 307.0 31-10631 12.5 15.3 16.7 15-300-DP60 85 × 163 3 × 147.4 31-10632 6.0 7.4 8.0 12.5 18-300-DP60 85 × 215 3 × 176.8 31-10633 7.2 8.8 9.6 15.0 12-400-DP60 85 × 163 3 × 66.3 31-10652 2.7 3.3 3.6 5.6 10.0 15-400-DP60 85 × 215 3 × 82.9 31-10653 3.4 4.1 4.5 7.0 12.5 24-400-DP60 85 × 278 3 × 132.6 31-10654 5.4 6.6 7.2 11.3 20.0 30-400-DP60 85 × 278 3 × 165.8 31-10655 6.8 8.3 9.0 14.1 25.0 12-440-DP60 85 × 163 3 × 54.8 31-10656 2.2 2.7 3.0 4.6 8.3 15-440-DP60 85 × 215 3 × 68.5 31-10657 2.8 3.4 3.7 5.8 24-440-DP60 85 × 278 3 × 109.6 31-10658 4.5 5.5 6.0 9.3 30-440-DP60 85 × 278 3 × 137.0 31-10659 5.6 6.8 7.4 10-480-DP60 85 × 163 3 × 38.4 31-10634 1.6 1.9 2.1 12.5-480-DP60 85 × 163 3 × 48 31-10635 2.0 2.4 20-480-DP60 85 × 215 3 × 76.8 31-10636 3.1 25-480-DP60 85 × 278 3 × 95.9 31-10637 3.9 11.25-525-DP60 85 × 163 3 × 36.1 31-10638 14-525-DP60 85 × 215 3 × 44.9 31-10639 22.5-525-DP60 85 × 278 3 × 72.2 28-525-DP60 85 × 278 3 × 89.8 10-600-DP60 12.5-600-DP60 600 V 6.3 7.8 570 V 31-10629 31-10630 525 V 85 × 163 3 × 153.5 85 × 215 3 × 191.9 480 V 10-240-DP60 12.5-240-DP60 460 V 440 V µF 415 V mm 400 V LKT ... Rated Reactive Power in kvar at Rated Voltage 50Hz 300 V Capacitance ArticleNo. 240 V Diam. × height 230 V Type 208 V Capacitor 11 Power Factor Correction Capacitors (three-phase) Type LKT…-DP60 for 60 Hz and 50 Hz Standard Capacitors (three-phase) - IEC ratings only LKT ... mm µF 12.5-690-DP60 85 × 215 3 × 23.2 31-10646 15-690-DP60 85 × 215 3 × 27.9 31-10647 20-690-DP60 85 × 215 3 × 37.1 31-10648 25-690-DP60 85 × 278 3 × 46.4 31-10649 30-690-DP60 85 × 320 3 × 55.7 12.6-800-DP60 85 × 215 3 × 17.4 16-800-DP60 85 × 215 3 × 22.1 31-10662 25.2-800-DP60 85 × 278 3 × 34.8 31-10663 Rated Reactive Power in kvar at Rated Voltage 60Hz 208 V … 600 V 800 V Capacitance ArticleNo. 750 V Diam. × height 690 V Type 615 V Capacitor 11.1 12.6 9.5 11.9 14.1 16.0 14.9 18.8 22.2 25.2 9.9 12.5 11.9 15.0 15.9 20.0 19.9 25.0 31-10650 23.8 30.0 31-10661 7.5 9.4 See Table Standard Capacitors (three-phase) - UL ratings Standard Capacitors (three-phase) - IEC ratings only 12 LKT ... mm µF 12.5-690-DP60 85 × 215 3 × 23.2 31-10646 15-690-DP60 85 × 215 3 × 27.9 31-10647 20-690-DP60 85 × 215 3 × 37.1 31-10648 25-690-DP60 85 × 278 3 × 46.4 31-10649 30-690-DP60 85 × 320 3 × 55.7 12.6-800-DP60 85 × 215 3 × 17.4 16-800-DP60 85 × 215 3 × 22.1 31-10662 25.2-800-DP60 85 × 278 3 × 34.8 31-10663 Rated Reactive Power in kvar at Rated Voltage 50Hz 8.3 10.4 9.9 12.5 13.2 16.7 16.6 20.8 31-10650 19.9 25.0 31-10661 6.2 7.8 9.2 10.5 7.9 9.9 11.7 13.3 12.4 15.6 18.5 21.0 208 V … 600 V See Table Standard Capacitors (three-phase) - UL ratings 800 V Capacitance ArticleNo. 750 V Diam. × height 690 V Type 615 V Capacitor Power Factor Correction Capacitors (single-phase) Type LKT…-EP for 60 Hz and 50 Hz Standard Capacitors (single-phase) - IEC ratings only 31-10547 3.3 4.1 6.0 10-280-EP 85 × 131 1 × 407.4 31-10548 6.6 8.1 12.0 3.33-440-EP 60 × 90 1 × 54.8 31-10526 0.9 1.1 1.6 3.3 3.6 4.0 4.17-440-EP 60 × 138 1 × 68.6 31-10527 1.1 1.4 2.0 4.1 4.5 5.0 5-440-EP 60 × 138 1 × 82.2 31-10528 1.3 1.6 2.4 5.0 5.33 6.0 9.4-440-EP 70 × 138 1 × 154.6 31-10511 2.5 3.1 4.6 9.3 10.0 11.3 2.4-480-EP 60 × 90 1 × 33.2 31-10529 0.5 0.7 1.0 2.0 2.15 2.4 2.7 2.9 3.33-480-EP 60 × 90 1 × 46.0 31-10530 0.8 0.9 1.4 2.8 3.0 3.4 3.7 4.0 3.6-480-EP 60 × 138 1 × 49.7 31-10531 0.8 1.0 1.5 3.0 3.2 3.6 3.9 4.3 4.8-480-EP 60 × 138 1 × 66.3 31-10515 1.1 1.3 2.0 4.0 4.3 4.8 5.3 5.8 6-480-EP 60 × 138 1 × 82.9 31-10514 1.4 1.66 2.5 5.0 5.4 6.0 6.6 7.2 2.8-525-EP 60 × 90 31-10532 0.5 0.7 1.0 1.9 2.1 2.4 2.6 2.8 3.33-525-EP 60 × 138 1 × 38.5 31-10533 0.6 0.8 1.1 2.3 2.5 2.8 3.1 3.3 4.0 8.33-525-EP 70 × 138 1 × 96.2 31-10518 1.6 1.9 2.8 5.8 6.3 7.0 7.7 8.33 10.0 525 V 3.4 480 V 1 × 32.3 525 V 60 × 138 1 × 203.7 480 V 5-280-EP 460 V µF 440 V mm 415 V LKT ... Rated Reactive Power in kvar at Rated Voltage 60Hz 400 V Capacitance ArticleNo. 280 V Diam. × height 230 V Type 208 V Capacitor Standard Capacitors (single-phase) - IEC ratings only 5-280-EP 60 × 138 1 × 203.7 31-10547 2.8 3.4 5.0 10-280-EP 85 × 131 1 × 407.4 31-10548 5.5 6.8 10.0 3.33-440-EP 60 × 90 1 × 54.8 31-10526 0.7 0.9 1.3 2.8 3.0 3.33 4.17-440-EP 60 × 138 1 × 68.6 31-10527 0.9 1.1 1.7 3.4 3.7 4.17 5-440-EP 60 × 138 1 × 82.2 31-10528 1.1 1.4 2.0 4.1 4.4 5.0 9.4-440-EP 70 × 138 1 × 154.6 31-10511 2.1 2.6 3.8 7.8 8.4 9.4 460 V µF 440 V mm 415 V LKT ... Rated Reactive Power in kvar at Rated Voltage 50Hz 400 V Capacitance ArticleNo. 280 V Diam. × height 230 V Type 208 V Capacitor 2.4-480-EP 60 × 90 1 × 33.2 31-10529 0.5 0.6 0.8 1.70 1.80 2.0 2.2 2.4 3.33-480-EP 60 × 90 1 × 46.0 31-10530 0.6 0.8 1.1 2.3 2.5 2.8 3.1 3.33 3.6-480-EP 60 × 138 1 × 49.7 31-10531 0.7 0.8 1.2 2.5 2.7 3.0 3.3 3.6 4.8-480-EP 60 × 138 1 × 66.3 31-10515 0.9 1.1 1.6 3.33 3.6 4.0 4.4 4.8 6-480-EP 60 × 138 1 × 82.9 31-10514 1.1 1.4 2.0 4.17 4.5 5.0 5.5 6.0 2.8-525-EP 60 × 90 1 × 32.3 31-10532 0.4 0.5 0.8 1.6 1.7 2.0 2.1 2.3 2.8 3.33-525-EP 60 × 138 1 × 38.5 31-10533 0.5 0.6 0.9 1.9 2.1 2.3 2.6 2.8 3.33 8.33-525-EP 70 × 138 1 × 96.2 31-10518 1.3 1.6 2.4 4.8 5.2 5.9 6.4 7.0 8.33 13 Power Factor Correction Capacitors (three-phase) Type LKT…-DL60 for 60 Hz and 50 Hz 3.2 4.0 4.3 6.8 12.0 12.9* 14.5* 31-10681 4.1 5.0 5.4 8.4 15.0 16.2* 18.2* 24-400-DL60 85 × 215 3 × 132.6 31-10682 6.5 7.9 8.6 13.5 24.0 25.8* 29.0* 12-440-DL60 85 × 163 3 × 54.8 31-10683 2.7 3.3 3.6 5.6 9.9 10.7 12.0 13.1* 14.3* 15-440-DL60 85 × 215 3 × 68.5 31-10684 3.4 4.1 4.5 7.0 12.4 13.3 15.0 16.4* 17.9* 24-440-DL60 85 × 278 3 × 109.6 31-10685 5.4 6.6 7.1 11.2 19.8 21.4 24.0 26.2* 28.6* 10-480-DL60 85 × 163 3 × 38.4 31-10686 1.9 2.3 2.5 3.9 6.9 7.5 8.4 9.2 10.0 12.0* 12.5-480-DL60 85 × 215 3 × 48.0 31-10687 2.3 2.9 3.1 4.9 8.7 9.3 10.5 11.5 12.5 15.0* 20-480-DL60 85 × 278 3 × 76.8 31-10688 3.8 4.6 5.0 7.8 13.9 15.0 16.8 18.4 20.0 23.9* 25-480-DL60 85 × 278 3 × 95.9 31-10689 4.7 5.7 6.3 9.8 17.4 18.7 21.0 23.0 25.0 29.9* 11.25-525-DL60 85 × 215 3 × 36.1 31-10690 1.8 2.2 2.4 3.7 6.5 7.0 7.9 8.6 9.4 11.25 13.3* 14.7 15.4* 14-525-DL60 85 × 215 3 × 44.9 31-10691 2.2 2.7 2.9 4.6 8.1 8.7 9.8 10.8 11.7 14.0 16.5* 18.3 19.2* 22.5-525-DL60 85 × 320 3 × 72.2 31-10692 3.5 4.3 4.7 7.3 13.1 14.1 15.8 17.3 18.8 22.5 26.5* 29.4 30.9* 615 V 31-10680 85 × 215 3 × 82.9 600 V 400 V 85 × 215 3 × 66.3 15-400-DL60 570 V 300 V 12-400-DL60 525 V µF 480 V mm 460 V LKT ... 240 V Rated Reactive Power in kvar at Rated Voltage 60Hz 440 V Capacitance ArticleNo. 230 V Capacitor 415 V Type Diam. × height 208 V Premium Capacitors (three-phase) 3) 3) UL and IEC ratings up to 600 V; 615 V IEC only Generally, DL-type capacitors can also be operated at higher voltages with the DP-type specification. Please note that the D values in the chart are marked with * 15-400-DL60 85 × 215 3 × 82.9 31-10681 3.4 4.1 24-400-DL60 85 × 215 3 × 132.6 31-10682 5.4 6.6 12-440-DL60 85 × 163 3 × 54.8 31-10683 2.2 15-440-DL60 85 × 215 3 × 68.5 31-10684 2.8 24-440-DL60 85 × 278 3 × 109.6 10-480-DL60 12.5-480-DL60 615 V 3.3 600 V 31-10680 2.7 570 V 85 × 215 3 × 66.3 525 V 12-400-DL60 480 V µF 460 V mm 440 V LKT ... 415 V Rated Reactive Power in kvar at Rated Voltage 50Hz 400 V Capacitance ArticleNo. 300 V Diam. × height 240 V Capacitor 208 V Type 230 V Premium Capacitors (three-phase) 3) 3.6 5.6 10.0 10.8* 12.1* 4.5 7.0 12.5 13.5* 15.1* 7.2 11.3 20.0 21.5* 24.2* 2.7 3.0 4.6 8.3 8.9 10.0 10.9* 11.9* 3.4 3.7 5.8 10.3 11.1 12.5 13.7* 14.9* 31-10685 4.5 5.5 6.0 9.3 16.5 17.8 20.0 21.9* 23.8* 85 × 163 3 × 38.4 31-10686 1.6 1.9 2.1 3.2 5.8 6.2 7.0 7.7 8.3 85 × 215 3 × 48.0 31-10687 2.0 2.4 2.6 4.1 7.2 7.8 8.8 9.6 10.4 12.5* 20-480-DL60 85 × 278 3 × 76.8 31-10688 3.1 3.8 4.2 6.5 11.6 12.5 14.0 15.3 16.7 19.9* 25-480-DL60 85 × 278 3 × 95.9 31-10689 3.9 4.8 5.2 8.1 14.5 15.6 17.5 19.1 20.8 24.9* 11.25-525-DL60 85 × 215 3 × 36.1 31-10690 1.5 1.8 2.0 3.1 5.5 5.9 6.6 7.2 7.8 9.4 11.1* 12.3 12.9* 14-525-DL60 85 × 215 3 × 44.9 31-10691 1.8 2.2 2.4 3.8 6.8 7.3 8.2 9.0 9.8 11.7 13.8* 15.3 16.0* 22.5-525-DL60 85 × 320 3 × 72.2 31-10692 3.0 3.6 3.9 6.1 10.9 11.7 13.2 14.4 15.7 18.8 22.1* 24.6 25.7* 10.0* 3) UL and IEC ratings up to 600 V; 615 V IEC only Generally, DL-type capacitors can also be operated at higher voltages with the DP-type specification. Please note that the D values in the chart are marked with * 14 Power Factor Correction Capacitors (three-phase) Type LKT…-HD60 for 60 Hz and 50 Hz Heavy Duty Capacitors (three-phase) 20.1-480-HD60 85 × 215 3 × 77.1 31-10693 3.8 4.6 5.0 7.9 14.0 15.0 16.9 18.5 20.1 21.6-480-HD60 85 × 215 3 × 82.9 31-10694 4.1 5.0 5.4 8.4 15.0 16.2 18.2 19.8 21.6 18.7-500-HD60 85 × 215 3 × 66.1 31-10695 3.2 4.0 4.3 6.7 12.0 12.9 14.5 15.8 17.2 18.7 19.3-500-HD60 85 × 215 3 × 68.3 31-10696 3.3 4.1 4.4 6.9 12.4 13.3 15.0 16.3 17.8 19.3 20.2-500-HD60 85 × 215 3 × 71.4 31-10697 3.5 4.3 4.7 7.3 12.9 13.9 15.6 17.1 18.6 20.2 21.6-525-HD60 85 × 215 3 × 69.3 31-10698 3.4 4.1 4.5 7.1 12.5 13.5 15.2 16.6 18.1 19.6 525 V 500 V 480 V 460 V 440 V 415 V µF 400 V mm 300 V LKT ... Rated Reactive Power in kvar at Rated Voltage 60Hz 240 V Capacitance ArticleNo. 230 V Type Diam. × height 208 V Capacitor 21.6 Heavy Duty Capacitors (three-phase) 20.1-480-HD60 85 × 215 3 × 77.1 31-10693 3.2 3.9 4.2 6.6 11.6 12.5 14.1 15.4 16.8 21.6-480-HD60 85 × 215 3 × 82.9 31-10694 3.4 4.1 4.5 7.0 12.5 13.5 15.1 16.5 18.0 18.7-500-HD60 85 × 215 3 × 66.1 31-10695 2.7 3.3 3.6 5.6 10.0 10.7 12.1 13.2 14.4 15.6 19.3-500-HD60 85 × 215 3 × 68.3 31-10696 2.8 3.4 3.7 5.8 10.3 11.1 12.5 13.6 14.8 16.1 20.2-500-HD60 85 × 215 3 × 71.4 31-10697 2.9 3.6 3.9 6.0 10.7 11.6 13.0 14.3 15.5 16.8 21.6-525-HD60 85 × 215 3 × 69.3 31-10698 2.8 3.5 3.8 5.9 10.5 11.3 12.6 13.8 15.1 16.3 525 V 500 V 480 V 460 V 440 V µF 415 V mm 400 V LKT ... Rated Reactive Power in kvar at Rated Voltage 50Hz 300 V Capacitance ArticleNo. 240 V Diam. × height 230 V Type 208 V Capacitor 18.0 15 Supplemental Ratings for Type DP60 Capacitors kVAr at 208V - 60Hz Capacitor kVAr at 240V - 60Hz kVAr at 380V - 60Hz kVAr at 440V - 60Hz kVAr at 480V - 60Hz kVAr at 600V - 60Hz Rated Voltage Rated KVAR uF uF wye equivalent per phase Type Max. No with 7% No with 7% No with 7% No with 7% No with 7% No with 7% Article No. Amps Reactor reactor Reactor reactor Reactor reactor Reactor reactor Reactor reactor Reactor reactor (continuous) 240 1 1.5 2 2.5 3 4 5 6 7.5 10 12.5 15 17.5 20 3x 15.4 3x 23.0 3x 30.7 3x 38.4 3x 46.1 3x 61.4 3x 76.8 3x 92.1 3x 115.1 3x 153.5 3x 191.9 3x 230.3 3x 268.6 3x 307.0 46.2 69.0 92.1 115.2 138.3 184.2 230.4 276.3 345.3 460.5 575.7 690.9 805.8 921.0 LKT 1-240-DP60 LKT 1.5-240-DP60 LKT 2-240-DP60 LKT 2.5-240-DP60 LKT 3-240-DP60 LKT 4-240-DP60 LKT 5-240-DP60 LKT 6-240-DP60 LKT 7.5-240-DP60 LKT 10-240-DP60 LKT 12.5-240-DP60 LKT 15-240-DP60 LKT 17.5-240-DP60 LKT 20-240-DP60 3.6 5.4 7.2 9 10.8 14.4 18 21.7 27.1 36.1 45.1 54.1 63.2 72.2 31-10800 31-10801 31-10802 31-10803 31-10804 31-10805 31-10806 31-10807 31-10808 31-10629 31-10630 31-10809 31-10810 31-10631 0.75 1.13 1.50 1.88 2.25 3.00 3.76 4.51 5.63 7.51 9.39 11.27 13.14 15.02 0.81 1.21 1.61 2.02 2.42 3.23 4.04 4.84 6.06 8.07 10.09 12.11 14.13 16.15 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 7.50 10.00 12.50 15.00 17.50 20.00 300 15 18 3x 147.4 3x 176.8 442.2 530.4 LKT 15-300-DP60 LKT 18-300-DP60 43.3 52 31-10632 31-10633 7.21 8.65 7.75 9.30 9.60 11.52 10.32 12.38 400 12 15 24 30 3x 66.3 3x 82.9 3x 132.6 3x 165.8 198.9 248.7 397.8 497.4 LKT 12-400-DP60 LKT 15-400-DP60 LKT 24-400-DP60 LKT 30-400-DP60 26 32.5 52 65 31-10652 31-10653 31-10654 31-10655 3.24 4.06 6.49 8.11 3.49 4.36 6.98 8.72 4.32 5.40 8.64 10.80 4.64 5.81 9.29 11.61 10.83 13.54 21.66 27.08 440 12 15 24 30 3x 54.8 3x 68.5 3x 109.6 3x 137.0 164.4 205.5 328.8 411.0 LKT 12-440-DP60 LKT 15-440-DP60 LKT 24-440-DP60 LKT 30-440-DP60 23.6 29.5 47.2 59.1 31-10656 31-10657 31-10658 31-10659 2.68 3.35 5.36 6.70 2.88 3.60 5.77 7.21 3.57 4.46 7.14 8.93 3.84 4.80 7.68 9.60 8.95 11.19 17.90 22.38 9.62 12.03 19.24 24.05 12.00 15.00 24.00 30.00 480 1 1.5 2 2.5 3 4 5 6 7.5 10 12.5 15 17.5 20 22.5 25 3x 3.8 3x 5.8 3x 7.7 3x 9.6 3x 11.5 3x 15.4 3x 19.2 3x 23.0 3x 28.8 3x38.4 3x 48.0 3x 57.6 3x 67.2 3x 76.8 3x 86.3 3x 95.9 11.4 17.4 23.1 28.8 34.5 46.2 57.6 69.0 86.4 115.2 144.0 172.8 201.6 230.4 258.9 287.7 LKT 1-480-DP60 LKT 1.5-480-DP60 LKT 2-480-DP60 LKT 2.5-480-DP60 LKT 3-480-DP60 LKT 4-480-DP60 LKT 5-480-DP60 LKT 6-480-DP60 LKT 7.5-480-DP59 LKT 10-480-DP60 LKT 12.5-480-DP60 LKT 15-480-DP60 LKT 17.5-480-DP60 LKT 20-480-DP60 LKT 22.5-480-DP60 LKT 25-480-DP60 1.8 2.7 3.6 4.5 5.4 7.2 9 10.8 13.5 18 22.6 27.1 31.6 36.1 40.6 45.1 31-10811 31-10812 31-10813 31-10814 31-10815 31-10816 31-10817 31-10818 31-10819 31-10634 31-10635 31-10820 31-10821 31-10636 31-10822 31-10637 0.19 0.28 0.38 0.47 0.56 0.75 0.94 1.13 1.41 1.88 2.35 2.82 3.29 3.76 4.23 4.69 0.20 0.30 0.40 0.50 0.61 0.81 1.01 1.21 1.51 2.02 2.52 3.03 3.53 4.04 4.54 5.05 0.25 0.38 0.50 0.63 0.75 1.00 1.25 1.50 1.88 2.50 3.13 3.75 4.38 5.00 5.63 6.25 0.27 0.40 0.54 0.67 0.81 1.08 1.34 1.61 2.02 2.69 3.36 4.03 4.70 5.38 6.05 6.72 0.63 0.94 1.25 1.57 1.88 2.51 3.13 3.76 4.70 6.27 7.83 9.40 10.97 12.53 14.10 15.67 0.67 1.01 1.35 1.68 2.02 2.69 3.37 4.04 5.05 6.74 8.42 10.11 11.79 13.47 15.16 16.84 0.84 1.26 1.68 2.10 2.52 3.36 4.20 5.04 6.30 8.40 10.50 12.60 14.70 16.81 18.91 21.01 0.90 1.35 1.81 2.26 2.71 3.61 4.52 5.42 6.77 9.03 11.29 13.55 15.81 18.07 20.32 22.58 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 7.50 10.00 12.50 15.00 17.50 20.00 22.50 25.00 525 11.25 14 22.5 28 3x 36.1 3x 44.9 3x 72.2 3x 89.8 108.3 134.7 216.6 269.7 LKT 11.25-525-DP60 LKT 14-525-DP60 LKT 22.5-525-DP60 LKT 28-525-DP60 18.6 23.1 37.1 46.2 31-10638 31-10639 31-10640 31-10641 1.77 2.20 3.53 4.40 1.90 2.36 3.80 4.72 2.35 2.93 4.70 5.85 2.53 3.15 5.05 6.29 5.89 7.33 11.79 14.67 6.34 7.88 12.67 15.77 7.90 9.83 15.80 19.67 8.49 10.57 16.99 21.14 9.40 11.70 18.81 23.41 10.11 12.58 20.22 25.16 600 1 1.5 2 2.5 3 4 5 6 7.5 10 12.5 15 17.5 20 22.5 25 3x 2.5 3x 3.7 3x 4.9 3x 6.1 3x 7.4 3x 9.8 3x 12.3 3x 14.7 3x 18.4 3x 24.6 3x 30.7 3x 36.8 3x 43.0 3x 49.1 3x 55.3 3x 61.4 7.5 11.1 14.7 18.3 22.2 29.4 36.9 44.1 55.2 73.8 92.1 110.4 129.0 147.3 165.9 183.3 LKT 1-600-DP60 LKT 1.5-600-DP60 LKT 2-600-DP60 LKT 2.5-600-DP60 LKT 3-600-DP60 LKT 4-600-DP60 LKT 5-600-DP60 LKT 6-600-DP60 LKT 7.5-600-DP60 LKT 10-600-DP60 LKT 12.5-600-DP60 LKT 15-600-DP60 LKT 17.5-600-DP60 LKT 20-600-DP60 LKT 22.5-600-DP60 LKT 25-600-DP60 1.4 2.2 2.9 3.6 4.3 5.8 7.2 8.7 10.8 14.4 18 21.7 25.3 28.9 32.5 36.1 31-10823 31-10824 31-10825 31-10826 31-10827 31-10828 31-10829 31-10830 31-10831 31-10642 31-10643 31-10832 31-10833 31-10644 31-10834 31-10645 0.12 0.18 0.24 0.30 0.36 0.48 0.60 0.72 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 0.13 0.19 0.26 0.32 0.39 0.52 0.65 0.78 0.97 1.29 1.61 1.94 2.26 2.58 2.91 3.23 0.16 0.24 0.32 0.40 0.48 0.64 0.80 0.96 1.20 1.60 2.00 2.40 2.80 3.20 3.60 4.00 0.17 0.26 0.34 0.43 0.52 0.69 0.86 1.03 1.29 1.72 2.15 2.58 3.01 3.44 3.87 4.30 0.40 0.60 0.80 1.00 1.20 1.60 2.01 2.41 3.01 4.01 5.01 6.02 7.02 8.02 9.03 10.03 0.43 0.65 0.86 1.08 1.29 1.72 2.16 2.59 3.23 4.31 5.39 6.47 7.55 8.62 9.70 10.78 0.54 0.81 1.08 1.34 1.61 2.15 2.69 3.23 4.03 5.38 6.72 8.07 9.41 10.76 12.10 13.44 0.58 0.87 1.16 1.45 1.73 2.31 2.89 3.47 4.34 5.78 7.23 8.67 10.12 11.56 13.01 14.45 0.64 0.96 1.28 1.60 1.92 2.56 3.20 3.84 4.80 6.40 8.00 9.60 11.20 12.80 14.40 16.00 0.69 1.03 1.38 1.72 2.06 2.75 3.44 4.13 5.16 6.88 8.60 10.32 12.04 13.76 15.48 17.20 1.00 1.50 2.00 2.50 3.00 4.00 5.00 6.00 7.50 10.00 12.50 15.00 17.50 20.00 22.50 25.00 690 12.5 15 20 25 30 3x 23.2 3x 27.9 3x 37.1 3x 46.4 3x 55.7 69.6 83.7 111.3 139.2 167.1 LKT 12.5-690-DP60 LKT 15-690-DP60 LKT 20-690-DP60 LKT 25-690-DP60 LKT 30-690-DP60 15.7 18.8 25.1 31.4 37.7 31-10646 31-10647 31-10648 31-10649 31-10650 1.14 1.36 1.82 2.27 2.73 1.22 1.47 1.95 2.44 2.93 1.51 1.81 2.42 3.02 3.63 1.63 1.95 2.60 3.25 3.90 3.79 4.55 6.07 7.58 9.10 4.08 4.89 6.52 8.15 9.78 5.08 6.10 8.13 10.17 12.20 5.46 6.56 8.74 10.93 13.11 6.05 7.26 9.68 12.10 14.52 6.50 7.80 10.40 13.01 15.61 9.45 11.34 15.12 18.90 22.68 10.16 12.19 16.26 20.32 24.39 800 12.6 16 25.2 3x 17.4 3x 22.1 3x 234.8 52.2 66.3 104.4 LKT 12.6-800-DP60 LKT 16-800-DP60 LKT 25.2-800-DP60 13.6 17.3 27.3 31-10661 31-10662 31-10663 0.85 1.08 1.70 0.92 1.16 1.83 1.13 1.44 2.27 1.22 1.55 2.44 2.84 3.61 5.69 3.06 3.88 6.11 3.81 4.84 7.62 4.10 5.20 8.19 4.54 5.76 9.07 4.88 6.19 9.75 7.09 9.00 14.18 7.62 9.68 15.24 Power Factor Correction Capacitors Transfab TMS 175, Jules-Léger Boucherville (QC) J4B 7K8 Canada Phone: 1‐866‐540‐0412 Fax: 450‐449‐9115 salestms@transfabtms.com transfabtms.com FRAKO 95-00321 / 07/12/8815 Subject to technical changes Type LKT