ACTION on Final PDD approval for a mixed-use

advertisement
Meeting:
Meeting Date:
Agenda Item:
Plan Commission
7/20/15
#7-8
Mission Statement
To provide our residents with a safe, friendly,
attractive and active community by aggressively
pursuing innovative ways to deliver valuable
services.
PLAN COMMISSION STAFF REPORT
REPORT TO:
Burt R. McIntyre, President
Plan Commission
Village Board of Trustees
REPORT FROM:
AGENDA ITEM:
Dave Wiese, Community Development Director
A request for a Final Planned Development District approval from Glenn Gajeski to allow for
a mixed-use development, including a two-acre commercial development on Glendale
Avenue, to wit BODE Boot Camp and BODE Healthy Shakes, a residential lot with cul-de-sac
on South Idlewild Court, and a green space with walking trail at 2465 Glendale Ave., VH-4412 and Lots VH-747-A-601 to VH-747-A-631.
ACTION REQUESTED:
___Ordinance _ __Resolution
X Motion _ _ Receive/File
POLICY ISSUE
Should the Plan Commission approve the Final PDD?
RECOMMENDATION
Staff recommends:
“Motion to approve the Final PDD with the conditions the following items are addressed for Final
approval:”
1. Hydrant Locations (public and private) are approved by the Village of Howard Fire Department
2. Easement and trail locations are provided from Idlewild Court to the Community Church property
and to Glendale Avenue
3. Buffers (Landscape or Fencing) are provided to the existing residential properties.
4. Trash dumpsters, recycling containers and other exterior refuse storage shall be effectively
screened from public view by opaque fences, walls or enclosures constructed of materials matching
that of the principal structure on the property.
5. A landscape buffer is provided to the adjacent residential properties.
BACKGROUND INFORMATION
The Bode Central Development will consist of a few common themes of health, fitness, and nature. The new CSM
will consist of three parcels with one being a residential lot. This PDD will be a mixed-use development. The
development will consist of a 2-acre commercial development on the north end by Glendale Avenue. The proposed
building will be “green” and very energy efficient. The tenant will be BODE Bootcamp and Bode Healthy Shakes “on
the go.” On the south end of the development there will be a new cul-de-sac constructed to provide school children
safety, ease of plowing for the village, and a possible future trailhead. In addition, 2.25 acres will be used by the
school district for a school forest. The remaining acreage of approximately 14 acres will be used as open natural
areas. Within this open 14 acres there will be discussions to include future trails established to meet future plans of
the village to tie into the parks and other public trail systems.
Direction
North
South
East
West
ADJACENT LAND USE/ZONING MATRIX
Land Use
Rental House / Fire Station
R-2 / R-1
Vacant Land
R-1
Single Family / School / Commercial
R-1
Railroad Tracks / Single Family
R-1
Zoning
ANALYSIS
1. Zoning - currently R-4 Multi-family & R-1 Single Family / requesting PDD
2. Setbacks - Per the CSM, there is a 25 foot building setback off both roads
3. Parking - There will be parking available on site per the PDD site plans.
4. Floodplain, Shoreland Zoning & Stormwater Management - The subject property is not in the
Floodplain, or Shoreland Zoning limits. Stormwater management plan will be provided in the Final PDD.
5. Land Division - A Certified Survey Map is being proposed for this project.
6. Lighting - Most lighting will be internal to the proposed buildings. Some exterior lighting will be provided
and will be down facing either attached to the buildings or 1 or more parking lot lights.
7. Fire Protection - The property will be served by the municipal water system and is located across the
street from the fire station
BODE Central
Lumark
D ES C R IPTION
The patented Lumark Crosstour™ LED Wall Pack Series of luminaries
provides an architectural style with super bright, energy efficient LEDs.
The low-profile, rugged die-cast aluminum construction, universal back
box, stainless steel hardware along with a sealed and gasketed optical
compartment make the Crosstour impervious to contaminants. The
Crosstour wall luminaire is ideal for wall/surface, inverted mount for
façade/canopy illumination, post/bollard, site lighting, floodlight and low
level pathway illumination including stairs. Typical applications include
building entrances, multi-use facilities, apartment buildings, institutions,
schools, stairways and loading docks test.
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
O pti c a l
Slim, low-profile LED design
with rugged one-piece, die-cast
aluminum hinged removable door
and back box. Matching housing
styles incorporate both a small and
large design. The small housing
is available in 7W and 18W. The
large housing is available in the
26W model. Patent pending secure
lock hinge feature allows for
safe and easy tool-less electrical
connections with the supplied
push-in connectors. Back box
includes three (3) half-inch, NPT
threaded conduit entry points. The
universal back box supports both
the small and large forms and
mounts to standard 3-1/2” to 4”
round and octagonal, 4” square,
single gang and masonry junction
boxes. Key hole gasket allows
for adaptation to junction box or
wall. External fin design extracts
heat from the fixture surface. Onepiece silicone gasket seals door
and back box. Minimum 5” wide
pole for site lighting application.
Not recommended for car wash
applications.
Silicone sealed optical LED
chamber incorporates a custom
engineered mirrored anodized
reflector providing high-efficiency
illumination. Optical assembly
includes impact-resistant
tempered glass and meets IESNA
requirements for full cutoff
compliance. Solid state LED
Crosstour luminaries are thermally
optimized with five (5) lumen
packages in cool 5000K or neutral
warm 3500K LED color temperature
(CCT).
El e c tri c a l
LED driver is mounted to the
die-cast housing for optimal heat
sinking. LED thermal management
system incorporates both
conduction and natural convection
to transfer heat rapidly away
from the LED source. 7W models
operate in -40°C to 40°C [-40°F
to 104°F]. 18W and 26W models
operate in -40°C to 40°C [-40°F to
104°F]. High ambient 50°C models
available. Crosstour luminaires
maintain greater than 90% of initial
light output after 72,000 hours
of operation. Three (3) half-inch
NPT threaded conduit entry points
allow for thru-branch wiring. Back
box is an authorized electrical
wiring compartment. Integral LED
electronic driver incorporates surge
protection. 120-277V 50/60Hz or
347V 60Hz models.
Fin ish
Crosstour is protected with a
Super durable TGIC carbon
bronze or summit white polyester
powder coat paint. Super durable
TGIC powder coat paint finishes
withstand extreme climate
conditions while providing optimal
color and gloss retention of the
installed life.
XTOR
CROSSTOUR LED
APPLICATIONS:
WALL / SURFACE
POST / BOLLARD
LOW LEVEL
FLOODLIGHT
INVERTED
SITE LIGHTING
Warran ty
Five-year warranty.
E S CUT CH E ON P L A T E S
D IMENS IONS
7W & 18W
6-3/4" [171mm]
26W
8" [203mm]
10"
[254mm]
CERTIFICATION DATA
UL/cUL Wet Location Listed
LM79 / LM80 Compliant
ROHS Compliant
ADA Compliant
NOM Compliant Models
IP66 Ingressed Protection Rated
Title 24 Compliant
DesignLights Consortium® Qualified*
17-1/2" [445mm]
7W & 18W
5-3/4" [146mm]
26W
6-5/8" [168mm]
7W & 18W
3-5/8" [92mm]
26W
4" [102mm]
TECHNICAL DATA
40°C Maximum Ambient Temperature
External Supply Wiring 90°C Minimum
17-1/2"
[445mm]
EPA
Effective Projected Area (Sq. Ft.):
XTOR1A/XT0R2A=0.34
XTOR3A=0.45
SHIPPING DATA:
Approximate Net Weight:
3.7 – 5.25 lbs. [1.7 – 2.4 kgs.]
10" [254mm]
*www.designlights.org
TD514013EN
2015-05-29 11:34:51
X TO R C R O S S TO U R L ED
L UMEN M A INTENA NC E
L U M E N S - C R I / CCT T A BL E
TM-21 Lumen
Maintenance
(72,000 Hours)
Theoretical L70
(Hours)
25°C
> 92%
> 290,000
40°C
> 92%
> 290,000
50°C
> 91%
> 270,000
Ambient
Temperature
LED Information
XTOR1A Model
25°C
> 91%
> 270,000
> 90%
> 260,000
50°C
> 88%
> 225,000
XTOR2A
XTOR2A-N
XTOR3A
XTOR3A-N
722
1,633
1,523
2,804
2,284
Delivered Lumens
(With Flood
Accessory Kit) 1
468
1,060
978
2,168
1,738
B0-U0-G0
B1-U0-G0
B1-U0-G0
B1-U0-G0
B1-U0-G0
5,000
5,000
3,500
5,000
3,500
CRI
(Color Rendering Index)
65
65
70
65
70
Power Consumption
(Watts)
7W
18W
18W
26W
26W
B.U.G. Rating 2
CCT
(Kelvin)
XTOR2A Model
40°C
XTOR1A
Delivered Lumens
(Wall Mount)
XTOR3A Model
NOTES: 1 Includes shield and visor. 2 B.U.G. Rating does not apply to floodlighting.
25°C
> 91%
> 280,000
40°C
> 91%
> 270,000
50°C
> 89%
> 240,000
CUR R ENT D R A W
Voltage
Model Series
XTOR1A
XTOR2A
XTOR3A
120V
0.05A
0.15A
0.22A
208V
0.03A
0.08A
0.13A
240V
0.03A
0.07A
0.11A
277V
0.03A
0.06A
0.10A
347V
0.025A
0.058A
0.082A
ORDER ING INFOR M A TION
Sample Number: XTOR2A-N-WT-PC1
Series 1
LED Kelvin Color
Housing Color
Options (Add as Suffix)
Accessories (Order Separately)
XTOR1A=Small Door, 7W
XTOR2A=Small Door, 18W
XTOR3A=Small Door, 26W
[Blank]=Bright White
(Standard) 5000K
N=Neutral Warm White,
3500K 2
[Blank]=Carbon Bronze
(Standard)
WT=Summit White
PC1=Photocontrol 120V
PC2=Photocontrol 208-277V 3, 4
347V=347V 5
HA=50ºC High Ambient 5
3
WG/XTOR=Wire Guard 6
XTORFLD-KNC=Knuckle Floodlight Kit 7
XTORFLD-TRN=Trunnion Floodlight Kit 7
XTORFLD-KNC-WT=Knuckle Floodlight Kit, Summit White 7
XTORFLD-TRN-WT=Trunnion Floodlight Kit, Summit White 7
EWP/XTOR=Escutcheon Wall Plate, Carbon Bronze
EWP/XTOR-WT=Escutcheon Wall Plate, Summit White
NOTES: 1 DesignLights Consortium® Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details. 2 XTOR1A not available in 3500K. 3 Photocontrols are factory installed. 4 Order PC2 for
347V models. 5 Thru-branch wiring not available with HA option or with 347V. 6 Wire guard for wall/surface mount. Not for use with floodlight kit accessory. 7 Floodlight kit accessory supplied with knuckle (KNC) or trunnion
(TRN) base, small and large top visors and small and large impact shields.
S TOCK OR D ER ING INFORM AT I O N
7W Series
18W Series
XTOR1A=7W, 5000K, Carbon Bronze
XTOR2A=18W, 5000K, Carbon Bronze
26W Series
XTOR3A=26W, 5000K, Carbon Bronze
XTOR1A-WT=7W, 5000K, Summit White
XTOR2A-N=18W, 3500K, Carbon Bronze
XTOR3A-N=26W, 3500K, Carbon Bronze
XTOR1A-PC1=7W, 5000K, 120V PC, Carbon Bronze
XTOR2A-WT=18W, Summit White
XTOR3A-WT=26W, Summit White
XTOR2A-PC1=18W, 120V PC, Carbon Bronze
XTOR3A-PC1=26W, 120V PC, Carbon Bronze
5 - D A Y Q UIC K S H IP OR D E R I N G I N F O R M AT I O N
7W Series
18W Series
26W Series
XTOR1A-WT-PC1=7W, 5000K, Summit White, 120V PC
XTOR2A-PC2=18W, 5000K, 208-277V PC, Carbon Bronze
XTOR3A-PC2=26W, 5000K, 208-277V PC, Carbon Bronze
XTOR2A-WT-PC1=18W, 5000K, Summit White, 120V PC
XTOR3A-WT-PC1=26W, 5000K, Summit White, 120V PC
XTOR2A-WT-PC2=18W, 5000K, Summit White, 208-277V PC
XTOR3A-WT-PC2=26W, 5000K, Summit White, 208-277V PC
XTOR2A-N-WT=18W, 3500K, Summit White
XTOR3A-N-WT=26W, 3500K, Summit White
XTOR2A-N-PC1=18W, 3500K, 120V PC, Carbon Bronze
XTOR3A-N-PC1=26W, 3500K, 120V PC, Carbon Bronze
XTOR2A-N-PC2=18W, 3500K, 208-277V PC, Carbon Bronze
XTOR3A-N-PC2=26W, 3500K, 208-277V PC, Carbon Bronze
XTOR2A-N-WHT-PC1=18W, 3500K, Summit White, 120V PC
XTOR3A-N-WHT-PC1=26W, 3500K, Summit White, 120V PC
XTOR2A-N-WT-PC2=18W, 3500K, Summit White, 208-277V PC
XTOR3A-N-WT-PC2=26W, 3500K, Summit White, 208-277V PC
Eaton
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
Specifications and
dimensions subject to
change without notice.
TD514013EN
2015-05-29 11:34:51
STREETWORKS
D ES C R IPTION
The classic lines and sophisticated construction of Vision Site LED makes
it an ideal complement to site design. Offering LED technology across
AVS and AVM, Vision provides true family scaling in both physical form
and lumen capability for architectural site lighting applications. UL/cUL
listed for use in wet locations.
TM
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
C on s t r u c t i o n
El e c tri c a l
Fin ish
HOUSING: Heavy wall, one piece
die-cast aluminum housing has
precise tolerance control and
repeatability in manufacturing.
Housing features a partition wall
that isolates driver components
for cooler operation. Integrel
aluminum heat sink provides
superior heat transfer in +40°C
ambient environment. DOOR:
One-piece, die-cast aluminum
construction with tool-less release
latch. Door swings down and is
retained on two (2) catch hinges.
GASKET: Continuous gasket
provided to seal housing to optic
tray. LENS: Downlight lens is LED
board integrated acrylic overoptics, each individually sealed for
IP66 rating. HARDWARE: Tool-less
release button latches are stainless
steel/aluminum construction,
painted to match housing and
allows access to internal housing
and electrical components.
DRIVER: LED drivers are potted and
heat sunk for optimal performance
and prolonged life. Standard
drivers feature electronic universal
voltage (120-277V/50-60Hz), greater
than 0.9 power factor, less than
20% harmonic distortion and
feature ambient temperature range
of +40°C (104°F) down to minimum
starting temperature of -30°C
(-22°F). Shipped standard with
Cooper Lighting proprietary circuit
module designed to withstand
10kV of transient line surge. All
LED LightBARs and drivers are
mounted to dedicated mounting
trays and are easily replaced by
use of quick disconnects for ease
of wiring. Driver tray is hinged
and removable without the use
of tools. Options to control light
levels, energy savings and egress
capabilities (battery pack and
separate circuit) are available.
Housing is finished in 5 stage
Super TGIC polyester powder coat
paint, 2.5 mil nominal thickness
for superior protection against
fade and wear. LightBAR™ cover
plates are standard white and
may be specified to match finish
of luminaire housing. Standard
colors include black, bronze, grey,
white, dark platinum and graphite
metallic. RAL and custom color
matches available. Consult Outdoor
Architectural Colors brochure for a
complete selection.
Warran ty
AVM VISION SITE
MEDIUM LED
Five-year limited warranty.
1 - 6 LightBARs
Solid State LED
ARCHITECTURAL LED AREA/SITE
LUMINAIRE
Mounti ng
Optics
DISTRIBUTION: Primary downlight
distribution offers a choice of
thirteen (13) patented, high
efficiency AccuLED Optics™ that
maximize light collection and
directional distribution onto the
application region. Each optical
lens is precision manufactured via
injection molding then precisely
arranged and sealed on the board
media. LEDs: High output LEDs,
50,000+ hours life at >70% lumen
maintenance, offered standard in
4000°K
(+/- 275K) CCT and nominal 70 CRI.
LightBAR optic tray is able to rotate
360° in 90° increments for specific
placement of the distribution
relative to fixture.
ARM: One-piece extruded
aluminum arm available in
standard 6" and 10" lengths.
Internal bolts guides allow easy
positioning of fixture during
installation to pole or wall surface.
STRUCTURAL MOUNT: Die-cast
aluminum cleat factory mounted to
luminaire and finished in luminaire
color. Stainless steel structural
rod measures 1/2" in diameter
and is provided in luminaire finish
color or optional natural finish.
Product works in conjunction
with dedicated accessory arms
(ordered seperately). Invue
poles are provided pre-drilled
when structural mount option
drill pattern is specified. See
Invue poles section for complete
selection. Additional mounting
accessories available.
CERTIFICATION DATA
UL/cUL Listed
ISO 9001
IP66 LIghtBARs
ARRA Compliant
ENERGY DATA
Electronic LED Driver
>0.9 Power Factor
<20% Total Harmonic Distortion
120-277V/50 & 60hz, 347V/60hz,
480V/60hz
-30°C Minimum Temperature
40°C Ambient Temperature Rating
D IMENS IONS
EPA
Effective Projected Area: (Sq. Ft.)
Single: ~ 1.6 (max.)
Single Structural: ~ 1.82 (max.)
7"
[178mm]
SHIPPING DATA
Approximate Net Weight:
51 lbs. (23.18 kgs.)
28" [724 mm]
6" or 10" [152 mm or 254 mm]
C
ER
TEM
D
YS
S
S
17" [432 mm]
TIFIE
ADW100028
2012-12-19 11:53:57
A VM VISION S I TE M ED I U M L ED
POWER A ND LUM ENS B Y B AR C O U N T
Number of
LightBARs
DISTRIBUTION
Power
[Watts]
Current @
120V [A]
Current @
277V [A]
T2A
T3A
T3S
C02
54
0.46
0.21
3,509
3,469
3,391
3,495
3,484
3,368
C03
77
0.65
0.29
5,291
5,230
5,112
5,269
5,252
5,078
C04
101
0.86
0.37
6,983
6,902
6,747
6,954
6,932
6,703
C05
131
1.11
0.50
8,362
8,265
8,079
8,327
8,300
C06
154
1.3
0.58
10,119
10,002
9,777
10,077
10,045
B02
51
0.43
0.20
4,317
4,267
4,171
4,299
4,285
B03
73
0.62
0.28
6,508
6,433
6,288
6,481
6,460
B04
95
0.81
0.35
8,589
8,490
8,299
8,554
8,526
B05
124
1.05
0.48
10,285
10,166
10,166
9,938
B06
146
1.24
0.56
12,446
12,302
12,302
12,026
T4S
SL2
SL3
SL4
5MQ
5WQ
5XQ
RWQ
SLR/SLL
3,347
3,711
3,724
5,046
5,594
5,614
3,605
3,540
3,203
5,436
5,337
6,660
7,383
7,410
4,829
7,174
7,043
8,026
7,975
8,841
6,373
8,872
8,590
8,434
9,712
9,651
10,699
7,631
10,737
10,396
10,206
9,235
4,143
4,117
4,564
4,580
6,246
6,207
6,881
6,906
4,435
4,354
3,940
6,686
6,564
8,244
8,192
9,081
9,114
8,824
8,663
5,939
7,839
10,209
9,871
9,809
10,874
10,913
10,566
10,373
9,386
12,355
11,946
11,871
13,159
13,207
12,786
12,554
11,359
7 LED LIGHTBAR
21 LED LIGHTBAR
L UMEN M ULTIPLIER
Ambient
Temperature
10°C
15°C
25°C
40°C
P O L E DR I L L I N G P A T T E RNS A ND MOUNT ING OP T IONS
Type M
Lumen
Multiplier
1.04
1.03
1.00
0.96
Structural Mount Type G
5/16" [8mm] Dia. Hole
2 5/16"
[59mm]
3/4" [20mm]
Dia. Hole
2 7/16" [124mm]
4 7/8" [124mm]
Mast Arm Adapter
2 3/4"
[70mm]
15 7/8"
[405mm]
3/4" [20mm]
Dia. Hole
(2) 5/8" [16mm]
Dia. Holes
5 1/4"
[134mm]
4 7/8" [124mm]
2 7/16"
[62mm]
Fits
2 3/8" [61mm]
O.D. Tenon
(2) 9/16" [15mm]
Dia. Holes
MOUNT ING OPTIONS A N D AC C E S S O R I E S
Structural Pole Mount
(Round or Square Pole)
Extruded Arm
Structrual Wall Mount
Mast Arm Adapter
Top Cap
12''
[305 mm]
Set
Screws
Direct Mount
(Round or Square Pole)
Direct Wall Mount Kit
Wall Bracket with Arm
Tenon Adapter
MOUNT ING V A R IA TIONS
Wall Mount
Arm Mount Single
EPA 1.6
Arm Mount 2 @ 180°
EPA 3.2
Arm Mount 2 @ 90°
EPA 3.2
Arm Mount 3 @ 120°
(Round Pole Only)
EPA 4.5
Arm Mount 3 @ 90°
EPA 4.5
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
Arm Mount 4 @ 90°
EPA 5.55
ADW100028
2012-12-19 11:53:57
A VM VISION S I TE M ED I U M L ED
ORDER IN G INFOR M A TION
SAMPLE NUMBER: AVMB04LEDEUT3SAPCPS
AVM
LED
Product Family 1
AVM=Vision Site
Medium
Number of LightBARs 2, 3
B01=[1] 21 LED LightBAR
B02=[2] 21 LED LightBARs
B03=[3] 21 LED LightBARs
B04=[4] 21 LED LightBARs
B05=[5] 21 LED LightBARs
B06=[6] 21 LED LightBARs
C01=[1] 7 LED LightBAR
C02=[2] 7 LED LightBARs
C03=[3] 7 LED LightBARs
C04=[4] 7 LED LightBARs
C05=[5] 7 LED LightBARs
C06=[6] 7 LED LightBARs
Lamp Type
LED=Solid State
Light Emitting Diodes
Ballast Type
E=Electronic
Distribution
T2A=Type II Area
T3A=Type III Area
T3S=Type III Short
T4S=Type IV Short
SL2=Type II w/Spill Control
SL3=Type III w/Spill Control
SL4=Type IV w/Spill Control
5MQ=Type V Square Medium
5WQ=Type V Square Wide
5XQ=Type V Square Extra Wide
RWQ=Rectangular Wide
SLL=90 Degree Spill Light
Eliminator Left
SLR=90 Degree Spill Light
Eliminator Right
Colors 4
BZ=Bronze
AP=Grey
BK=Black
WH=White
DP=Dark Platinum
GM=Graphite Metallic
Structural Options 1, 5
CPS=Strut Rod/Square Pole 6
CSS=Strut Rod/Square Pole
Stainless Steel 6
CPR=Strut Rod/Round Pole 7
CSR=Strut Rod/Round Pole
Stainless Steel 7
8
CPW=Strut Rod/Wall Mount
CSW=Strut Rod/Wall
Mount Stainless Steel 8
Options 9
3=Three position Terminal Block
4=NEMA Photocontrol Receptacle
U=UL Listed/CSA Certified
2L=Bi-Level Switching 10
7060=70 CRI 6000K CCT 11
8030=80 CRI 3000K CCT 11
Voltage
U=Universal (120-277V)
8=480V
9=347V
NOTES:
1 Arm not included. Order separately, see accessories.
2 21 LED LightBAR powered at 350mA, 7 LED LightBAR powered at 1A.
3 Standard 4000K CCT and nominal 70 CRI.
4 Custom and RAL color matching available upon request. Consult your Cooper Lighting
Representative for further information
5 Add as suffix in the order shown.
6 Compatible with 10" SA1051 arm only.
7 Compatible with 10" SA1053 arm only.
8 Wall mount structural options do not include arm assembly (see accessories). Compatible with 10" SA1231 arm only.
9 Add as suffix.
10 Low-level output varies by bar count. Consult factory. Requires quantity of two or more LightBARs.
11 Consult customer service for lead times and lumen multiplier.
12 Order separately/replace XX with color suffix.
13 Use when mounting fixture heads at 90 degree increments.
14 For use in downlighting applications only.
15 Includes arm only. Must specify CPW or CSW in fixture ordering logic. Downlight only.
Accessories 12
SA1050-XX=6" Arm for Square Pole
SA1051-XX=10" Arm for Square Pole
SA1052-XX=6" Arm for Round Pole
SA1053-XX=10" Arm for Round Pole 13
SA1058-XX=Wall Bracket with 6" Arm 14
SA1054-XX=Direct Mount for Square Pole
SA1057-XX=Direct Mount for Round Pole
SA1201-XX=Direct Wall Mount Kit
SA1207-XX=Mast Arm Adapter
SA1231-XX=Structural Mount Wall Mount Arm
SA1017-XX=Single-arm Tenon Adapter for
2 3/8" O.D. Tenon 15
SA1018-XX=2 @ 180 Degree Tenon Adapter for
2 3/8" O.D. Tenon
SA1019-XX=3 @ 120 Degree Tenon Adapter for
2 3/8" O.D. Tenon
SA1115-XX=3 @ 90 Degree Tenon Adapter for
2 3/8" O.D. Tenon
SA1116-XX=2 @ 120 Degree Tenon Adapter for
2 3/8" O.D. Tenon
SA1010-XX=Single-arm Tenon Adapter for
3 1/2" O.D. Tenon
SA1011-XX=2 @ 180 Degree Tenon Adapter for
3 1/2" Tenon
SA1012-XX=3 @ 120 Degree Tenon Adapter for
3 1/2" O.D. Tenon
SA1013-XX=4 @ 90 Degree Tenon Adapter
3 1/2" O.D. Tenon
SA1014-XX=2 @ 90 Degree Tenon Adapter for
3 1/2" O.D. Tenon
SA1015-XX=2 @ 120 Degree Tenon Adapter for
3 1/2" O.D. Tenon
SA1016-XX=3 @ 90 Degree Tenon Adapter for
3 1/2" O.D. Tenon
SA1045-XX=4 @ 90 Degree Tenon Adapter for
2 3/8" O.D. Tenon
SA1048-XX=2 @ 90 Degree Tenon Adapter for
2 3/8" O.D. Tenon
SA1117-XX=Single Arm Tenon Adapter for
2-3/8" O.D. Tenon
SA1118-XX=2 @ 180 Degree Tenon Adapter for
2-3/8" O.D. Tenon
SA1119-XX=3 @ 120 Degree Tenon Adapter for
2-3/8" O.D. Tenon
OA/RA1016=NEMA Photocontrol - Multi-Tap
OA/RA1027=NEMA Photocontrol - 480V
OARA1201=NEMA Photocontrol - Multi-Tap - 347V
OA1223=10kV Circuit Module Replacement
DesignLights™ Consortium Qualified. Refer to www.designlights.org Qualified Products List under Family Models for details.
NOTE: Specifications and dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801
ADW100028
2012-12-19 11:53:57
&
BA
S
KE
LA
ER
UP
LACONA COURT
NA
CA
ES
R
IO
COMMUNITY WAY
BRICK
EAST
IDLEWILD
STREET
WEST IDLEWILD
DANE
DANE CT
BODE
ARDEN
GLENDALE
N. IDLEWILD
S. IDLEWILD
sINGLE fAMILY hOME
DRIVE
ILR
RA
D
OA
Download