RC-Model
Accessories
2014
Hobbico - one of the largest suppliers of hobby products in
the world - not only in the realm of radio control hobbies.
The starting point was in 1986, when Tower Hobbies and Great
Planes Model Distributor consolidated. During the following
years, Hobbico continuously expanded it’s product range to
include over 40 owned and other brands. In 2007 for example,
Hobbico aquired Revell-Monogram, Revell’s previous sistercompany.
In 2012, the concern then aquired the R/C car brands Axial,
Arrma, and Team Durango, as well as the Revell corporation,
the international market leader in plastic model kits, making
Revell now also a distributor of Hobbico brands in Europe.
Real Flight
ESCs/Motors
Aircraft Accessories
Carbon Fiber
RealFlight 7.0 . . . . . . . . . . . . . . . . .4
RealFlight Basic . . . . . . . . . . . . . . .8
Brushless Accessories
for RC-Cars . . . . . . . . . . . . . . . . . .26
Brushless Motors
for Boats . . . . . . . . . . . . . . . . . . .27
Brushless motor mount . . . . . . . .46
Propellers & Adapters . . . . . . . . .47
Propeller flanges . . . . . . . . . . . . .47
APC Airscrews . . . . . . . . . . . . . . .48
Wooden airscrews . . . . . . . . . . . .53
Aluminium-/Nylon spinners . . . .54
Dummy pilots . . . . . . . . . . . . . . .55
Shrink tubing,
Silixon-/Fuel tubes. . . . . . . . . . . .56
Fuel-/Tank Accessories. . . . . . . . .56
Small parts and further
aircraft accessories . . . . . . . . . . . .58
ROBART
Retractable landing gears . . . . . .94
Sheets, Rods, Tubes, Strips . . . . . .74
R/C Sets
Secure Link Technology™ . . . . . . . .9
Tactic TTX410 . . . . . . . . . . . . . . . .10
Tactic TTX610 . . . . . . . . . . . . . . . .11
Tactic TTX650 . . . . . . . . . . . . . . . .12
Tactic TTX850 . . . . . . . . . . . . . . . .14
Tactic AnyLink2 . . . . . . . . . . . . . .16
Tactic TTX250 . . . . . . . . . . . . . . . .17
Tactic Receiver . . . . . . . . . . . . . . .18
Servos
Tactic Servos. . . . . . . . . . . . . . . . .19
Potent brands – potent products!
PulseTec354 . . . . . . . . . . . . . . . . .28
PulseTec906 . . . . . . . . . . . . . . . . .29
PulseTec2006D . . . . . . . . . . . . . . .30
Battery Packs
ElectriFly battery packs . . . . . . . .31
FlightPower LiPo batteries . . . . . .32
LiPo receiver batteries . . . . . . . . .34
ONYX Racingand receiver batteries . . . . . . . . .35
Hardcase LiPo batteries . . . . . . . .36
Powerboat LiPo batteries . . . . . . .36
Nuts and Bolts
Screws, nuts, washers . . . . . . . . .64
and useful aids
Aircraft tools. . . . . . . . . . . . . . . . .75
Propeller reamer . . . . . . . . . . . . .75
Helicopter tools . . . . . . . . . . . . . .76
Rotor blade holders . . . . . . . . . . .76
RC-Car tools . . . . . . . . . . . . . . . . .76
For boats:
High-Performance
Metal propeller . . . . . . . . . . . . . .78
Propeller Balancer . . . . . . . . . . . .78
Boat accessories . . . . . . . . . . . . . .79
Iron-on covering foil
accessories . . . . . . . . . . . . . . . . . .81
Self-adhesive striping tape . . . . .82
Covering film . . . . . . . . . . . . . . . .83
RC-Modelling Accessories
List of contents
ESCs/Motors
Brushless (ESC). . . . . . . . . . . . . . .21
RimFire Brushless
Outrunner Motors. . . . . . . . . . . . .22
AMMO Brushless
Inrunner Motors . . . . . . . . . . . . . .24
Brushless Motors
for RC-Cars . . . . . . . . . . . . . . . . . .25
We are present at many R/C modelling exhibitions and events.
Charger
Tools
Leads, Connectors,
& Adapters
Connectors & Adapters . . . . . . . . .37
Leads & Connectors . . . . . . . . 38-46
Ball Bearings
Colors & Airbrush
Ball bearing, thrust bearing . . . . .70
Email Color / Aqua Color . . . . . . .84
Spray Color . . . . . . . . . . . . . . . . . .86
Color accessories . . . . . . . . . . . . .87
Adhesives
Instant adhesives
and accessories . . . . . . . . . . . . . .72
Epoxy and accessories . . . . . . . . .73
Fibreglass matting . . . . . . . . . . . .73
Airbrush „Starter Class” . . . . . . . .90
Airbrush „Standard Class” . . . . . .91
Airbrush „Master Class” . . . . . . . .92
3
In 1999, Great Planes Model Manufacturing and Knife Edge Software
together began the development of RealFlight, a revolutionary R/C
flight simulator for Windows computers.
Through extensive testing of flight characteristics, and the adaptability
and photo-realism of their aircraft and flying fields, the developers
of RealFlight have achieved an unprecedented level of accuracy and
detail, which has improved with each subsequent new version. The
software comprises various training tools, enabling novices and
inexperienced pilots to improve their abilities without damaging their
real-life models
RealFlight is also valued for its InterLink Elite Controller, which is
based on a genuine Futaba® transmitter, and combines the functions
of high-quality R/C transmitters with features which are especially
useful in controlling flight simulation.
›››
Real Rendering:
Increase the optical definition
with Real Rendering! With Real
Rendering even the finest of detail,
such as panel lines, will be shown,
whilst at the same time the
demand on your CPU is minimised.
Precisely applied aeroplane and helicopter flight physics. The simulated
models behave exactly like the real-life models – the only way that flying
can really be learnt with success.
Realflight 7.0 sets new standards in ultra-realistic
flight simulation. Both software and hardware
alike have been extended with new features. In
addition to the existing InterLink Elite controller,
their are two newly-developed configurations:
an interface which can be directly connected to
the DSC receptacle in your transmitter, and a
combination of a real Tactic TTX600 transmitter
with DSC receptacle, and the interface.
These numerous possiblities will enable you to
choose exactly the right RealFlight 7.0 version for
your particular application:
Newly developed challenges increase the fun
factor during the learning process. You are required
to accomplish interesting tasks of increasing
difficulty, thereby learning the art of precise flying
whilst thoroughly enjoying yourself.
RC Flight Simulation
Minimum system requirements
Windows XP*, Windows Vista*, Windows 7* or Windows 8*
Processor with 1.0GHz
RAM 512 MB
Hard disc memory 10 GB
DVD drive
Graphic card with 3D acceleration: 32 MB RAM, DirectX9* compatible
*Microsoft registered trademark
Beginner
4
Advanced
Professional
Fighter pilot display (HUD)
Balloon bursting
Flying ring racing
on
›››
Smart Binocular Vision:
Fades in automatically when the
aircraft recedes more than a certain
distance, and fades out again when
no longer necessary.
›››
Safety precautions:
Check that all default pre-settings
are correct, exactly as if you were
flying with your real R/C model.
Highlights:
RealFlight 7.0
off
›››
Reset and rewind function:
With RealFlight, crashes are not a
problem; simply press the reset
and continue flying. Press and hold
the reset to rewind your flight back
to a desired point, then continue
flying from there.
Night flying
›››
See more – with TrueView!
TrueView shows everything in
RealFlight as if you were actually
on the flying field in daylight.
Colours are brighter, truer and more
intense, and contrasts are sharper
even between different shades of
a single colour. Details are thus
accentuated as never before.
Cockpit canopies are transparent,
and are further defined by reflected
light.
TrueView
›››
Multiplayer options:
Test your capabilities by fighting
with too little ammunition and the
risk of crashing, should you fly too
aggressively!
5
Upgrade to RealFlight 7.0
Add the latest RealFlight improvements to G4 to G6.5 simulators*! RealFlight 7.0
uses the InterLink Elite controller which you received with the earlier version of
your compatible RealFlight Software. The same familiar and unchanged controller
functions are still available after the upgrade.
Does not include *InterLink Elite Controller
Note: QuickSelect and Digital Trims are not available with
G3 and G3.5 InterLink plus controller.
Upgrade
RealFlight 7.0
Order no.: GPMZ4508
ently
ller perman
alFlight
e the contro
av
Re
le
y
jo
to
t
n en
u wan
ou
Yo
Y
that you ca
itter, but
so
m
,
ns
PC
tra
e
ur
to th
retrieve yo
connectted
ly
tly
nt
itter –
an
ta
t
m
ns
ns
tra
ng to co
nnect your
without havi
n..
sionally co
on
io
si
ca
rs
r
oc
ve
e
to
ite
it
e
k El
nk
Liin
errL
would lik
the Intte
then choose
t see
fly, but don’
mitter –
e to learn to
other trans
an
se
u would lik
ha
You
Yo
rc
pu
er,
ly
itt
nt
m
ue
ns
ould subseq
e TTX600 tra s.
why you sh
el
rrsion with th
od
ve
m
e
-R
th
Tx
se
l
en fly al
then choo
you can th
with which
nsmitter with ion.
ssess a tra
errface verrs
u already po
ou
e intte
Yo
Y
th
se
oo
le – then ch
ac
pt
ce
re
DSC
RF7 update,
version G4 and higher
Beginner
Advanced
Professional
Expansion Packs
RealFlight 7.0
Order no.: GPMZ4512
Order no.: GPMZ4513
Interlink
RF7 with InterLink, Mode 2
RF7 with InterLink, Mode 1
InterLink Elite Controller version highlights:
★ Practical features such as digital trimming and QuickSelect make the InterLink
Elite incredibly simple to operate.
★ The integral interface to which you can connect your own transmitter makes it
extremely versatile.
★ In addition the Multimode function makes it possible to use controller and
transmitter simultaneously – a unique option amongst flight simulators.
★ QuickSelect: Check all the elementary software functions directly with the
controller – makes mouse and keyboard practically unnecessary.
6
RealFlight 7.0
Order no.: GPMZ4514
Interface
RF7 with Interface
RealFlight 7.0
Order no.: GPMZ4518
Transmitter
RF7 with Transmitter TTX600, Mode 2
Interface version
highlights:
TTX600 version
highlights:
★ Attractively priced version of RealFlight 7.0. You need only your own
transmitter with DSC receptacle
(compatible with most available transmitters).
★ Software with pre-installed transmitter types makes setting up quick
and easy (can be individually adjusted).
★ Short-cut buttons allow all relevant functions to be called up from the
keyboard.
★ Includes the genuine TTX600 fully functional R/C transmitter which can
be used subsequently to control Tx-R models.
★ Connection of the TTX600 to the PC via the included interface.
★ TTX600 is pre-installed in the software, eliminating time-consuming
set-up.
★ Includes all of the highlights of the interface version.
With RealFlight, time of day and weather conditions are unimportant – your flying field
is no further away than your computer. Expansion Pack 8 introduces you to a world full
of new adventure. Take part in an air race with a 1930’s Thompson Trophy Fighter, or
fly a heavy transport aircraft or legendary jet fighter. Experience new challenges with an
Sbach 342 or impressive Synergy N5. In addition, the pack contains a new 3-D obstacle
course and two further PhotoField flying fields.
Helicopter Mega Pack
Order no.: GPMZ4162
Airplane Mega Pack
Order no.: GPMZ4160
Expansion Pack 8
Order no.: GPMZ4118
Helicopter Mega Pack
contains 47 additional
Helicopters.
Aeroplane Mega Pack
contains 36 additional
aircraft
Requires RealFlight G5
or higher.
7
Flying with RealFlight Basic is easy, fun, and completely without risk! RealFlight Basic has all
the fundamental functions of a flight simulator at a low cost, offering beginner training with
a high enjoyment factor - realistic and user-friendly.
★ Incredible graphics and flight physics.
★ Good hobby-quality USB-controller with QuickSelect™ function.
★ Eliminates the need for mouse and keypad.
★ Excellent choice of aircraft and PhotoField™ flying sites.
★ Compatible with Windows®
★ All on one single DVD.
Use QuickSelect™ to simply
choose your aircraft, flying
site and viewing perspective,
and away you go!
RealFlight Basic
Order no.: GPMZ4223
Order no.: GPMZ4224
RealFlight Basic Mode 2
RealFlight Basic Mode 1
RealFlight 7
RealPhysics™ 3D
★
★
PhotoField™ &
3D-Terrain
PhotoField
only
Number of aircraft
Over 120
47
Flying sites
Over 40
6
Camera views
Unlimited
Ground view only
Unlimited
aircraft &
environment
adjustability
Wind only
Adjustable Parameters
Basic-Controller
Interlink Elite-Controller
6-Channel
8-Channel
On-screen R/C
★
★
Binocular Function
★
★
NavGuides™
★
Viewport
★
Variometer
★
Integral Transmitter Interface
★
Upgradable with Expansion Packs
★
Float Flying off Water
★
Night Flying
★
Aircraft & Airport Editors
★
Training Aids, Virtual Flight Instruction
★
Multiplayer (Internet & Split-Screen)
★
Voice Chat
★
On-screen Chat
★
Screenshots & Flight Recording
★
Depth of Field Effect
★
Real Rendering™
★
★
RC Flight Simulation
Multiplayer Events
★
Head Tracking
★
Dynamic Background Objects
★
Minimum system requirements
Windows XP*, Windows Vista*, Windows 7* or Windows 8*
Processor with 1.0GHz
RAM 512 MB
Hard disc memory 10 GB
DVD drive
Graphic card with 3D acceleration: 32 MB RAM, DirectX9* compatible
Streamers
★
Improved Heli Physics
★
Quick Loading
★
Quick Editing
★
Heli Safety Alerts
★
Reset/Rewind
★
Autorotation
★
Challenges
★
Beginner
Advanced
Professional
RF Basic
Flight Environment
Air Combat
*Microsoft registered trademark
8
RealFlight 7.0 and Basic comparison table
In the realm of radio control, technology has to be available, affordable, reliable, and user-friendly.
SLT protocol R/C equipment fulfills all these requirements. SLT ensures that the Tactic transmitter
broadcasts clearly defined 2.4 GHz frequency hopping (FHSS) signals, and that the Tactic receiver
reacts only to the signals from the transmitter to which it is linked.
Link transmitter to receiver... with just a single push of a button
With SLT protocol, the transmitter signal is coded, making it as unmistakeable as a fingerprint, and with a single push of a button, the
receiver can be linked to the transmitter. The receiver then “learns” to
recognise this code, and to react only to signals from this transmitter.
Even when several models are in operation, the receiver can be relied
upon to react solely to the signals intended for it.
... and any number of SLT receivers
Practically-minded pilots want to control many models with only one
transmitter. With SLT receivers, this becomes child’s play. Use your
transmitter to control two or more models by just installing an SLT
receiver in each model. Then, push the button to create a stable interference-free link between transmitter and models. That’s all it takes…
fast and simple.
A strong, interference-free link between transmitter and…
The link between transmitter and receiver is not only instantly created;
it is continuous, and cannot be interrupted. The link via SLT protocol is
the main contributing factor which places Tactic systems amongst the
most reliable and interference-free 2.4 GHz systems available.
SLT: a future-proof system
Although it is not yet a legal requirement, the TTX650 transmitter
sytem already conforms to the new R&TTE Norm 1.8.1, showing
how much consideration and future-planning has gone into the
programming of SLT protocol.
Simply reliable:
Secure Link Technology
TM
SLT: added reliability.
Since the introduction of the TTX400 in 2007, SLT protocol has become
indispensable to the Tactic transmitter, being the main contributing
factor to the well-known reliability. SLT protocol is employed with many
Aquacraft models, and all Flyzone and Tx-R models use SLT protocol
transmitters and receivers.
9
The ideal 4-channel 2.4 GHz FHSS R/C beginner set:
Highlights:
★ 4-channel R/C system
★ SLT transmission protocol, compatible
with all Tx-R models in the Hobbico range
★ Maximum range
★ Delta and V-tail mixer
★ Servo reverse on all 4 channels
★ Mode 2, convertible to Mode 1
★ Wireless trainer system
★ Ball bearing gimbals
★ Ergonomic design
★ Charge jack: Futaba® compatible
★ DSC receptacle
If you are looking to purchase your very first R/C model, then the
TTX410 with it’s numerous advantages is exactly the right choice for
you. 2.4 GHz for practically interference-free operation. Freedom to
fly models without having to use Quarzes. No more doubly occupied
channels. Two preset mixers. Interference-free link between transmitter and receiver, and a wireless trainer/learner system enabling
you to learn from an experienced pilot without the encumbrance of
tangled cables, or additional cost.
Using the integral DSC connection and interface version of RealFlight
7.0 (order no: GPMZ4504), you can also practice flying directly on
your Windows® PC.
A single push of a button links the TR625 receiver to the unique
coded transmitter signal. Additional receivers can be also just as
simply linked to the transmitter, enabling it to be used for several
models.
Tactic TTX410
Order no. TACJ2410
R/C Set
Beginner
10
Advanced
Technical Specification Transmitter:
Channels . . . . . . . . . . . . . 4
Frequencies . . . . . . . . . . . 2.403-2.480 GHz
Modulation . . . . . . . . . . . FHSS
Protocol . . . . . . . . . . . . . . SLT
Transmission power . . . . . <100 mW
Input voltage . . . . . . . . . . 3.4-7.0 V
Current consumption . . . . ca. 100 mA
Accessories:
-
-
Professional
Highlights:
★ 6-channel R/C system
★ SLT transmission protocol, compatible
with all Tx-R models in the Hobbico range
★ Maximum range
★ Delta and V-tail mixer
★ Servo reverse on all 6 channels
★ Mode 2, convertible to Mode 1
★ Wireless trainer system
★ Ball bearing gimbals
★ Channel 5: 2-position switch e.g. for
undercarriage
★ Channel 6: 3-position switch e.g. for
flaps or gyro system
★ Switch for dual rate 100% to 60% on
ailerons, elevator, and rudder
★ Ergonomic design
★ Charge jack: Futaba® compatible
★ DSC receptacle
If you are looking to purchase your very first R/C model, and also
desire special functions, then the TTX610 is the right choice.
It has all the advantages of the TTX410: 2.4 GHz for practically interference-free operation. Freedom to fly models without having to use
Quarzes. No more doubly occupied channels, etc. Use the wireless
trainer/learner system to learn from an experienced pilot without the
encumbrance of tangled cables, or additional cost.
In addition to this, there are also two more switchable channels
available for special functions such as flaps, retractable undercarriage,
or gyro system. And then there is also a switchable dual-rate function of
100% to 60% on all 3 control-surface channels – ideal for the take-off
and landing phases.
Using the integral DSC connection on your TTX610, and the interface
version of RealFlight 7.0 (order no: GPMZ4504), you can also practice
flying directly on your Windows® PC.
Delivery includes:
TTX410 2.4 GHz 4-channel transmitter
TR625 2.4 GHz 6-channel diversity receiver
Battery case for 4 AA batteries
Switch cable
Carrying strap
Instruction manual: German, English, French
The ideal 6-channel 2.4 GHz FHSS R/C beginner set:
Technical Specification Receiver:
Channels . . . . . . . . . .6
Fail Safe . . . . . . . . . . .throttle channel programmable,
. . . . . . . . . . . . . . . . . .other channels hold
Input voltage . . . . . . .4.0-6.0 V
Connecting system . . .JR®-/Futaba®-Standard
Dimensions . . . . . . . .45 x 25 x 13 mm
Weight . . . . . . . . . . . .9.5 g
Tactic TTX610
Order no. TACJ2610
R/C Set
Order no. TACL0624, Receiver TR624
Order no. TACL0625, Diversity receiver TR625
Order no. TACM02xx, Tactic servo line
Order no. GPMM18xx, Silver Series ESC
All technical specifications and illustrations are provisional and may be
subject to alteration.
Receiver included
Beginner
Advanced
Technical Specification Transmitter:
Channels . . . . . . . . . . . . . 6
Frequencies . . . . . . . . . . . 2.403-2.480 GHz
Modulation. . . . . . . . . . . . FHSS
Protocol . . . . . . . . . . . . . . SLT
Transmission power . . . . . <100 mW
Input voltage . . . . . . . . . . 3.4-7.0 V
Current consumption . . . . ca. 100 mA
Delivery includes:
Accessories:
-
-
TTX610 2.4 GHz 6-channel transmitter
TR625 2.4 GHz 6-channel diversity receiver
Battery case for 4 AA batteries
Switch cable
Carrying strap
Instruction manual: German, English, French
Professional
Technical Specification Receiver:
Channels . . . . . . . . . .6
Failsafe . . . . . . . . . . . .throttle channel programmable,
. . . . . . . . . . . . . . . . . .other channels hold
Input voltage . . . . . . .4.0-6.0 V
Connecting system . . .JR®/Futaba®-Standard
Dimensions . . . . . . . .45 x 25 x 13 mm
Weight . . . . . . . . . . . .9.5 g
Order no. TACL0624, Receiver TR624
Order no. TACL0625, Diversity receiver TR625
Order no. TACM02xx, Tactic servo line
Order no. GPMM18xx, Silver Series ESC
All technical specifications and illustrations are provisional and may be
subject to alteration.
Receiver included
11
Highlights:
The TTX650 was developed for both the novice and the intermediate
users in the realm of computerised 2.4GHz R/C systems. Thanks to the
future-proof SLT transmission protocol, you can enjoy all the functions
required for the safe and precise control of practically any plane, boat,
vehicle, or helicopter. It’s 20 model memory and simple and intuitive
programming sets the TTX650 apart from other systems.
The 128x64 pixel LCD screen will display mixing graphs etc., and
with it’s adjustable brightness, is always easy to read. Quality and
functionality, coupled with attractive pricing, make the TTX650 the
perfect system for all applications. A further highlight is the wireless
trainer system, which is compatible to all other Tactic transmitters,
and allows the transmitter to be used as both trainer and learner
transmitter.
Profit from the ever expanding range of transmitter-ready (Tx-R)
models that you can directly control with your TTX650.
Battery, order no: HCAM6321, not included
Tactic TTX650
Order no. TACJ2652
Technical Specification Transmitter:
Channels . . . . . . . . . . . . . 6
Frequencies . . . . . . . . . . . 2.403-2.480 GHz
Modulation. . . . . . . . . . . . FHSS
Protocol . . . . . . . . . . . . . . SLT
Transmission power . . . . . <100 mW
Input voltage . . . . . . . . . . 3.4-7.0 V
Current consumption . . . . ca. 100 mA
Dimensions . . . . . . . . . . . ca. 190 x 190 x 80 mm
Weight . . . . . . . . . . . . . . . ca. 540 g (without batteries)
Technical Specification Receiver:
Channels . . . . . . . . . .6
Failsafe . . . . . . . . . . . .throttle channel programmable,
. . . . . . . . . . . . . . . . . .other channels hold
Input voltage . . . . . . .4.0-6.0 V
Connecting system . . .JR®/Futaba®-Standard
Dimensions . . . . . . . .45 x 25 x 13 mm
Weight . . . . . . . . . . . .8.3 g
Delivery includes:
Accessories:
-
-
TTX650 2.4 GHz 6-channel computer transmitter
TR624 2.4 GHz 6-channel receiver
4 x AA batteries
Instruction manual: German, English.
Available for download: French, Czech
★ 6-channel computerised R/C system with comprehensive plane and
heli programs, also suitable for marine models
★ SLT transmission protocol, compatible with all Tx-R models
in the Hobbico range
★ Maximum range
★ 20-Model memory
★ Mode 2, convertible to Mode 1
(Mode 3/4 via channel assignment)
★ Wireless trainer/learner system with freely definable channel handover
★ Freely programmable switch assignment
★ Dual rate and exponential (ailerons, elevator, and rudder)
★ Programmable timers
★ Free channel and switch assignment for all channels
★ Ball bearing gimbals
★ Ergonomic design
★ Updatable
★ Charging jack: Futaba® compatible
Order no. TACL0624, Receiver TR624
Order no. TACL0625, Receiver TR625
Order no. TACM02xx, Tactic Servo Line
Order no. GPMM18xx, Silver Series ESC
Order no. HCAM6321, NiMH Transmitter
Battery 4.8 V, 2000mAh
Computerised R/C system
Beginner
12
Advanced
Professional
Receiver included
The TTX850 is a further development of the TTX650, comprising all
Highlights:
★ 8-channel computerised R/C system with
more expansive plane, quadrocopter, and
helicopter programs
★ SLT transmission protocol, compatible with
all Tx-R models in the Hobbico range
★ Maximum range
★ Internal transmission antenna
★ 30-model memory
★ Programmable vibration alarm
★ Mode 2, convertible to Mode 1,
(Mode 3/4 via software)
★ Free channel assignment on all channels
★ Free and preprogrammed mixers
★ 3 programmable flight phases
the options of this successful R/C system, plus additional features.
Now there are 8 channels available, as well as 30-model memory,
expanded programming options, multi-language software, and a
charging unit with interchangeable connectors.
Thanks to the future-proof SLT transmission protocol, you can enjoy
all the functions required for the safe and precise control of any
plane, boat, quadrocopter, or helicopter.
Simple and intuitive programming sets the TTX850 apart from
other systems. The large, illuminated LCD screen gives even better
rendering of mixing graphs, etc., and with adjustable brightness is
always easy to read. Quality and functionality, coupled with attractive
pricing, make the TTX850 the perfect system for all applications.
A further highlight is the wireless trainer system, which is compatible
with all other Tactic transmitters, and allows the TTX850 to be used
as both trainer and learner transmitter.
The included Diversity Receiver TR825 has more reliability, and
extended range, due to it’s double antenna system.
Tactic TTX850
Order no. TACJ2852
14
Advanced
Professional
Technical Specification Receiver:
Channels . . . . . . . . . .8
Failsafe . . . . . . . . . . . .throttle channel programmable,
. . . . . . . . . . . . . . . . . .other channels hold
Input voltage . . . . . . .4,0-6,0 V
Connecting system . . .JR®/Futaba® Standard
Dimensions . . . . . . . .45 x 25 x 13 mm
Weight . . . . . . . . . . . .10 g
Delivery includes:
Accessories:
-
- Order no. TACL0825, Diversity Receiver TR825
- Transmitter battery LiFe 6.6V
(ask dealer for order no.)
- Order no. TACM02xx, Tactic Servo Line
- Order no. GPMM18xx, Silver Series ESC
TTX850 2.4 GHz 8-8-channel computer transmitter
TR825 2.4 GHz 8-channel receiver
Battery case for 4 x AA batteries
4 x AA batteries
Eco-charger with changeable adaptors for Euro,
british 3-pin, and US plug systems
- Instruction manual: German, English, French
Computerised R/C system
Beginner
Technical Specification Transmitter:
Channels . . . . . . . . . . . . . 8
Frequencies . . . . . . . . . . . 2.403-2.480 GHz
Modulation. . . . . . . . . . . . FHSS
Protocol . . . . . . . . . . . . . . SLT
Transmission power . . . . . <100 mW
Input voltage . . . . . . . . . . 3,4-7,0 V
Current consumption . . . . ca. 100 mA
★ All usual programs, such as: throttle curve, aileron differentiation
aileron/elevator mixer, flap mixer, and much more
★ Tail types: normal, V-tail, delta (elevator+aileron), 2 elevator
★ Swash mixer: 1 servo, 2 servos (180º), 3 servos (90º),
3 servos (120º), 3 servos (135º)
★ Special heli programs: pitch curves, swash mixer, swash limiter etc
★ Wireless trainer/learner system with freely definable
channel handover
★ Freely programmable switch assignment
★ Dual rate and exponential
(ailerons, elevator, and rudder)
★ Programmable timers
★ Ball bearing gimbals
★ Ergonomic design
★ Transmitter software in German, English,
French
★ Large illuminated LCD display
★ Updatable
★ Charging jack: Futaba® compatible
★ DSC receptacle
All technical specifications and illustrations are provisional and may be subject to alteration.
Improvements to AnyLink
One system for all! The interface between your transmitter and
Tx-R models
The new AnyLink2 is extremely versatile, and suitable for just about
any available transmitter, regardless of manufacturer, waveband or
modulation
The interface mitter
ur trans
between yo models
and Tx-R
Tactic AnyLink2
Order no.: TACJ2005
With AnyLink2, you can enjoy the reliability of 2.4 GHz equipment and
control more models than before – and all that with the transmitter
you know best and trust most: your own!
AnyLink2 is a small black box which enables you to utilise the full
potential of your existing transmitter to control all Tx-R models, and
all models fitted with a Tactic receiver, without having to forgo the
familiar and proven facilities of your own transmitter. All you need is
a transmitter with a trainer/DSC connection.
The external 2.4 GHz AnyLink2 FHSS HF Module is configured to be
compatible with most commonly available transmitters. AnyLink2
attaches to your transmitter, can be removed at will, and makes no
changes to your system whatever! With little effort, and very low
cost, you are able to operate all Tx-R and Tactic-compatible models.
Additionally, you can benefit by very affordably upgrading your
MHz R/C to 2.4 GHz. With the AnyLink2 and extra Tactic receiver, you
instantly have a complete 2.4 GHz R/C system in operation.
★ Full range
(no more 300 m limit)
★ Internal power supply,
no separate battery necessary
★ Simplified adaptor cable system
★ Sanwa/Airtronics® compatible
★ Integral clip for affixing to transmitter
carrying handle
★ Automatic power control system
★ Simple setup for adaption to the
transmitter
★ Includes LiPo battery and charger
Compatible with AnyLink2
Brand
Model
Futaba
4YF (MHz+GHz), 4YBF, 6EX, TJ, 7C, 8FG, 8J,
9C, 10C, 12FG, 12Z, 14SG, 14MZ, 18MZ
F
B included)
4VF, 5U, 6A, 6DA, 6H, 6X, 6YF, 6YG, 7U, 7NFK, 8U, 9Z
F
D (TACM0013)
All with Trainer/DSC receptacle
J
A included)
S
A included)
JR
Hitec
Accessories:
- Order no.: TACM0013, Adaptor cable D
- Order no.: TACM0014, Adaptor cable E
- Order no.: TACM0016, Adaptor cable F
Beginner
16
Advanced
Professional
Highlights:
Accessories Included
Spektrum DX4e, DX5e, DX6, DX7s, DX8, DX9, DX10T, DX18
External HF-Module
Modern electronics eliminate practically all possible interference,
making this controller ideally suitable for boats, trucks and buggies.
With adjustable control throw and servo-reverse on both channels,
you can take full advantage of your model’s possibilities. In addition,
the steering wheel and 70/30 proportioning of the throttle lever help
increase sensitivity of control
★ 3-channel R/C system
★ SLT transmission protocol
★ Optimal range
★ Servo-reverse on 2 channels
★ Servo neutral adjustable on both channels
★ Adjustable dual rate for steering
★ Ergonomic design
This much-improved and optimised version of it’s predecessor system,
AnyLink, will greatly enhance your modelling enjoyment.
Technical Specification Transmitter:
Frequencies . . . . . . . 2.403-2.480 GHz, FHSS
Power Indicator . . . . red LEDs
Inactivity Alert . . . . . 5 Minutes
Output power . . . . . . < 100 mW
Dimensions . . . . . . . 68 x 37 x 25 mm
Weight . . . . . . . . . . . 46 g (inkl. Akku)
W
hether you have just discovered your enthusiasm for model racing
sport, or wish to upgrade your current Ready-to-Run model to 2.4 GHz,
the ergonomically designed TTX300 3-channel pistol grip transmitter
offers all the advantages of GHz-technology at low cost!
AnyLink2 Kabeltyp
MODE
DX6i, DX7
S
C included)
Optic 5, Optic 6 Sport, and Eclipse 7 (GHz), Aurora 9
H
C included)
Neon, Flash 4sx, Flash 5, Flash 5sx, Focus 4, Focus 6,
Laser 4, Laser 6, Optic 5 (MHz), Optic 6 (MHz+GHz),
Eclipse 7 (MHz), Prism 7, Prism 7X
H
D (TACM0013)
Sanwa/
SD-5G, SD-6G, SD-10G
Airtronics Vanguard 4FM, 6FM, RD6000 Sport, RD6000 Super,
RDS8000, Radiant 6FM
A
E (TACM0014)
A
F (TACM0015)
Graupner
mx-12, mx-16 (Graupner/JR)
mc-19, mc-22, mc-24 (with trainer receptacle 3290.3)
J
A included)
Walkera
Devo 8S
A
C included)
Generally, other transmitters with DSC receptacles are also suitable, but have not been
subjected to a Hobbico functionality test.
Tactic TTX300
Order no.: TACJ0300
Pistolgrip R/C Set
Beginner
Advanced
Professional
Technical Specification Transmitter:
Channels . . . . . . . . . . . . . 3
Frequencies . . . . . . . . . . . 2.403-2.480 Ghz
Modulation. . . . . . . . . . . . FHSS
Protocol . . . . . . . . . . . . . . SLT
Transmission power . . . . . <100 mW
Input voltage . . . . . . . . . . 3.4-7.0 V
Current consumption . . . . ca. 100 mA
Delivery includes:
Accessories:
- TTX300 2.4 GHz 3-channel pistol grip
transmitter
- Micro 2.4 GHz 3-channel receiver
- Battery case for 4 AA batteries
- Line-switch cable
- Operating instructions: German, English,
French
-
Technical Specification Receiver:
Channels . . . . . . . . . .3
Input voltage . . . . . . .4.0-6.0 V
Connecting system . . .JR®-/Futaba®-Standard
Order no. TACL0624, Receiver TR624
Order no. TACL0625, Diversity Receiver TR625
Order no. TACM02xx, Tactic Servo Line
Order no. GPMM18xx, Silver Series ESC
Receiver included
17
Tactic Receivers
Powerful, reliable performance –
for an exceptionally good price.
P
urposed-developed Tactic receivers enable you to operate all commonly available
models. This attractively priced series of quality receivers leaves nothing to be desired
in range and reliability.
Take total control of your model with a Tactic receiver.
The purpose-developed Tactic servos provide the speed, torque,
and precision necessary to deliver optimal results in practically all
normal applications. If the criteria are size and weight, then the
compact micro servo TSX5, weighing only 9g is one solution. The
opposite extreme is TSX65, a digital high-voltage, ultra-torque
metal-gear servo, developing over 230 N/cm torque at 7.4V!
★ Receivers have universal-connector compatible sockets, making them compatible
with all commonly available servos, ESCs etc. (except TACL0424)
★ Appropriate choice of size and connector system, covers all applications – from
micro to giant model.
★ Up to date, single-receiver unit – no complex, costly Master / Satellite receiver
systems. Simply unnecessary!
★ Push-button linking of transmitter and receiver – fast, easy, and reliable.
★ Complete compatibility: developed to work with all Tactic 2.4 GHz transmitters,
all transmitters using SLT-protocol, and with AnyLink and AnyLink2.
★ Simply combine your present suitable transmitter with an AnyLink2 and Tactic
receiver. There you have a simple, fast, and affordable MHz to 2.4 GHz upgrade.
Take total control of your model – with Tactic servos.
Receiver TR424
Order no.: TACL0424
4-channel ultra-light receiver for all
micro-model applications, with special
micro-model connection system
(compatible with servo TACM0190).
Technical Specification:
Housing dimensions
30 x 15 x 8 mm
Weight
1.8 g
Input voltage range
4.8-6.0V
(4 x NiMH or 4 x AA batteries)
External antenna length
30 mm
★ All mounting hardware included.
★ Servos are equipped with a universal connector, making them
compatible with all other commonly available products.
★ Operating voltage range (except order no. TACM0265):
4.8 to 6.0V
Receivers
Receiver TR624
Order no.: TACL0624
6-channel receiver for all
applications
18
general purpose
Housing dimensions
Weight
Torque (4.8V)
Speed (4.8V)
Torque (6,0 V)
Speed (6,0 V)
Servo TSX10
Micro servo
Order no.: TACM0210
Servo TSX1.9
Micro servo
Order no.: TACM0190
6-channel, 2-antenna diversity receiver for all
applications. Longer coaxial antenna enable
optimal positioning inside the model, resulting
in the best possible communication (e.g. with
carbon fibre class fuselage)
Technical Specification:
Housing dimensions
45 x 26 x 13 mm
Weight
9.5 g
Input voltage range
4.8-6.0V
(4 x NiMH or 4 x AA batteries)
External antenna length
150 mm
D
Digital - for all micro-modelling
applications.
Housing
dimensions
13,5 x 6,4 x 20,2 mm
Weight
1,9 g
Suitable only for receiver TR424
(Order no.: TACL0424)
Servo TSX20
Mini servo
Order no.: TACM0220
D
MG
BB
CL
BB
Two ball bearing general purpose
Housing dimensions
36 x 15 x 29 mm
Weight
25 g
Torque (4.8V)
32 N/cm
Speed (4.8V)
0.16 sec/60°
Torque (6,0 V)
40 N/cm
Speed (6,0 V)
0,13 sek./60°
Servo TSX25
Mini servo
Order no.: TACM0225
D
MG
BB
Digital, two ball bearing, metal-geared
general purpose
Housing dimensions
23 x 12 x 27 mm
Weight
14 g
Torque (4.8V)
12 N/cm
Speed (4.8V)
0.12 sec/60°
Torque (6,0 V)
17 N/cm
Speed (6,0 V)
0,10 sek./60°
23 x 12 x 27 mm
9g
10 N/cm
0.11 sec/60°
10 N/cm
0,09 sek./60°
Servos
Receiver TR625
Order no.: TACL0625
Technical Specification:
Housing dimensions
45 x 26 x 13 mm
Weight
8.3 g
Input voltage range
4.8-6.0V
(4 x NiMH or 4 x AA batteries)
External antenna length
30 mm
Servo TSX5
Micro servo
Order no.: TACM0205
D
CL
Digital, general purpose
Housing dimensions
36 x 15 x 29 mm
Weight
25 g
Torque (4.8V)
61 N/cm
Speed (4.8V)
0.15 sec/60°
Torque (6,0 V)
66 N/cm
Speed (6,0 V)
0,12 sek./60°
Digital
Metal gear train
Two ball bearings
Coreless motor
Servo TSX35
Standard servo
Order no.: TACM0235
Economy, general purpose
Housing dimensions
40 x 20 x 37 mm
Weight
38 g
Torque (4.8V)
48 N/cm
Speed (4.8V)
0.18 sec/60°
Torque (6,0 V)
53 N/cm
Speed (6,0 V)
0,16 sek./60°
19
Order no.: GPMM1810
Order no.: GPMM1800
Servo TSX40
Standard servo
Order no.: TACM0240
MG
BB
Two ball bearing, metal gear,
heavy-duty
Housing dimensions
40 x 20 x 38 mm
Weight
51g
Torque (4.8V)
67 N/cm
Speed (4.8V)
0.16 sec/60°
Torque (6,0 V)
71 N/cm
Speed (6,0 V)
0,13 sek./60°
Servo TSX45
Standard servo
Order no.: TACM0245
Servo TSX47
Standard servo
Order no.: TACM0247
MG
BB
Two ball bearing, metal gear,
heavy-duty
Housing dimensions
40 x 20 x 38 mm
Weight
51g
Torque (4.8V)
103 N/cm
Speed (4.8V)
0.21 sec/60°
Torque (6,0 V)
109 N/cm
Speed (6,0 V)
0,17 sek./60°
Servos
Servo TSX55
Ultra-Torque servo
Order no.: TACM0255
20
MG
BB
High-performance ultra-torque, two ball
bearing, metal gear, heavy-duty
Housing dimensions
41 x 20 x 38 mm
Weight
58g
Torque (4.8V)
131 N/cm
Speed (4.8V)
0.24 sec/60°
Torque (6,0 V)
146 N/cm
Speed (6,0 V)
0,21 sek./60°
Servo TSX57
Ultra-Torque servo
Order no.: TACM0257
Digital, high-performance, ultra-torque,
two ball bearing, metal gear, heavy-duty
Housing dimensions
41 x 20 x 38 mm
Weight
58g
Torque (4.8V)
127 N/cm
Speed (4.8V)
0.23 sec/60°
Torque (6,0 V)
135 N/cm
Speed (6,0 V)
0,20 sek./60°
D
MG
BB
Order no.
Description
GPMM1800
GPMM1810
GPMM1820
GPMM1830
GPMM1840
GPMM1850
GPMM1860
Silver Series-8
Silver Series-12
Silver Series-25
Silver Series-35
Silver Series-45
Silver Series-60
Silver Series-80
Digital
Metal gear train
Two ball bearings
Coreless motor
Servo TSX65
Ultra-Torque servo
Order no.: TACM0265
Order no.: GPMM1830
Silver Series Brushless ESC
D
MG
BB
Digital, two ball bearing, metal gear,
heavy-duty
Housing dimensions
40 x 20 x 38 mm
Weight
51g
Torque (4.8V)
77 N/cm
Speed (4.8V)
0.23 sec/60°
Torque (6,0 V)
95 N/cm
Speed (6,0 V)
0,16 sek./60°
D
MG
BB
CL
Order no.: GPMM1820
NiMH
cells
6-12
6-12
7-12
7-12
7-12
14-32
14-32
LiPo
cells
2-4
2-4
3-4
3-4
3-4
4-12
4-12
Continuous
Current (A)
8
12
25
35
45
60
80
Surge
Current (A)
10
15
28
40
50
72
96
BECCurrent (A)
1,5
1,5
2,0
2,0
2,0
no BEC
no BEC
Battery
connection
Deans Micro
Deans Micro
Deans (T plug)
Deans (T plug)
Deans (T plug)
Deans (T plug)
Deans (T plug)
Motor
Brake
connector
2,0 mm
yes
2,0 mm
yes
3,5 mm
yes
3,5 mm
yes
4,0 mm
yes
4,0 mm
yes
6,0 mm
yes
Brushless ESCs
D
MG
BB
CL
High-voltage digital, high-performance, ultra-torque,
two ball bearing, metal gear - for extreme applications
Housing dimensions
41 x 20 x 38 mm
Weight
66 g
Torque (4,8 V):
233 N/cm
Speed (4,8 V):
0,15 sek./60°
Torque (6,0 V)
257 N/cm
Speed (6,0 V)
0,13 sek./60°
Order no.: GPMM1840
Order no.: GPMM1850
Order no.: GPMM1860
Connecting the Silver Series Brushless ESC takes just
a few seconds - it could only be simpler if it was
already installed in the model. Programming of the
Silver Series Brushless controller takes place automatically on connection, and a flick of the throttle
stick activates/deactivates the brake option. Seven
practical ESC versions mean there is a Silver Series
ESC for just about any combination of aircraft and
BL-motor.
★ Compatible with LiPo, NiCd und NiMH for maximum
flexibility.
★ Ready for use, with leads and Deans Ultra Plug
battery connectors, gold plated bullet plugs for
motor, and universal receiver plugs.
★ No setup: detects start-up voltage and sets low
voltage cut-off automatically on connection.
★ Extremely smooth, precise, and responsive
throughout the throttle range.
★ Instant transition from maximum to zero power.
Enjoy prolonged flights and instantaneous reaction.
★ BECs provide true rated current that digital servos or extra servo set-ups - require (except GPMM1850
and GPMM1860)
★ Optional motor brake stops folding props instantly,
or lets fixed props freewheel.
★ Protect pilot, aircraft and ESC with Safe Start
programming and automatic heat and current
overload functions.
★ Ideal for use with most innrunner/outrunner
motors.
21
ø 15
RimFire 150
Order no.: GPMG4453
ø 18
ø 28
RimFire 200
Order no.: GPMG4455
ø 28
RimFire 250
Order no.: GPMG4502
ø 28
RimFire 300
Order no.: GPMG4505
ø 28
RimFire 370
Order no.: GPMG4525
ø 50
ø 63
RimFire .10
Order no.: GPMG4595
ø 35
ø 35
RimFire .15
Order no.: GPMG4620
ø 42
RimFire EF1 Race
Order no.: GPMG4630
RimFire .55
Order no.: GPMG4715
22
ø 42
RimFire .25
Order no.: GPMG4675
RimFire .46
Order no.: GPMG4725
ø 50
RimFire .80
Order no.: GPMG4740
RimFire 1.60
Order no.: GPMG4795
RimFire 50 cc
Order no.: GPMG4800
RimFire 65 cc
Order no.: GPMG4805
ø 42
RimFire .32
Order no.: GPMG4700
RIMFIRE
Brushless Outrunner Motors
ø 42
ø 80
RimFire 400
Order no.: GPMG4560
RimFire 1.20
Order no.: GPMG4770
ø 35
ø 80
ø 50
Order no.
Description
Diameter
Length
kV
Power Surge
continuous power
Weight
Shaft
diameter
Rated voltage range
Sports aircraft
weight
3D aircraft
weight
Recommended drive system
ESC
LiPo Airscrew (in x in)
GPMG4453
RimFire 150
15 mm
15,9 mm
3000
21 W
GPMG4455
RimFire 200
18 mm
18,8 mm
2400
36 W
24 W
7,1 g
1,5 mm
7,4 V / 2S LiPo
65 g
40 g
6 Amp
2S
5 x 4,3 Electric
47 W
12,4 g
2 mm
7,4 V / 2S LiPo
177 g
110 g
6 Amp
2S
7 x 3,5 Electric
GPMG4502
RimFire 250
28 mm
13 mm
1750
GPMG4505
RimFire 300
28 mm
22 mm
1380
90 W
120 W
20 g
3 mm
7,4 - 11,1 V / 2-3S LiPo
225 g
140 g
8 Amp
2S
7 x 6 to 8 x 4 Slow-Flyer
100 W
150 W
27 g
3 mm
7,4 - 11,1 V / 2-3S LiPo
395 g
255 g
12 Amp
3S
8 x 4,5 to 10 x 4,5 Slow-Flyer
GPMG4525
RimFire 370
28 mm
26 mm
1000
GPMG4560
RimFire 400
28 mm
30 mm
950
135 W
165 W
41 g
3 mm
7,4 - 11,1 V / 2-3S LiPo
595 g
370 g
12 Amp
3S
9 x 4,5 to 10 x 4,5 Slow-Flyer
160 W
220 W
54 g
3 mm
7,4 - 11,1 V / 2-3S LiPo
905 g
565 g
25 Amp
3S
8 x 6 to 10 x 4,5 Slow-Flyer
GPMG4595
RimFire .10
35 mm
30 mm
GPMG4620
RimFire .15
35 mm
36 mm
1250
325 W
390 W
71 g
4 mm
7,4 - 11,1 V / 2-3S LiPo
1360 g
905 g
35 Amp
3S
10 x 4,5 to 10 x 7 Electric
1200
500 W
650 W
102 g
4 mm
11,1 - 14,8 V / 3-4S LiPo
1815 g
1135 g
45 Amp
4S
10 x 7 to 11 x 7 Electric
GPMG4630
RimFire EF1 Race 35 mm
45 mm
1250
800 W
1000 W
159 g
5 mm
7,4 - 14,8 V / 2-4S LiPo
1500 g
–
75 Amp
4S
8x8
GPMG4675
RimFire .25
GPMG4700
RimFire .32
42 mm
40 mm
1000
650 W
740 W
125 g
5 mm
11,1 - 14,8 V / 3-4S LiPo
2040 g
1360 g
45 Amp
3S
11 x 8,5 to 12 x 6 Electric
42 mm
50 mm
800
850 W
1480 W
198 g
5 mm
11,1 - 14,8 V / 3-4S LiPo
2950 g
1845 g
45 Amp
4S
12 x 6 to 13 x 8 Electric
GPMG4715
GPMG4725
RimFire .55
42 mm
60 mm
480
1100 W
1850 W
268 g
5 mm
18,5 - 22,2 V / 5-6S LiPo
4310 g
2720 g
60 Amp
6S
13 x 10 to 15 x 8 Electric
RimFire .46
42 mm
60 mm
800
1000 W
1850 W
268 g
5 mm
18,5 - 22,2 V / 5-6S LiPo
3400 g
2210 g
60 Amp
6S
10 x 5 to 11 x 5 Electric
GPMG4740
RimFire .80
50 mm
55 mm
500
1300 W
2200 W
298 g
8 mm
18,5 - 22,2 V / 5-6S LiPo
5215 g
3175 g
60 Amp
6S
15 x 6 to 15 x 8 Electric
GPMG4745
RimFire .60
50 mm
55 mm
650
1200 W
2200 W
298 g
8 mm
18,5 - 22,2 V / 5-6S LiPo
4705 g
2950 g
60 Amp
6S
12 x 6 to 13 x 4 Electric
GPMG4770
RimFire 1.20
50 mm
65 mm
450
1800 W
2300 W
400 g
8 mm
18,5 - 22,2 V / 5-6S LiPo
6520 g
4080 g
80 Amp
6S
16 x 6 to 17 x 8 Electric
GPMG4795
RimFire 1.60
63 mm
62 mm
250
2500 W
3200 W
634 g
8 mm
33,3 - 44,4 V / 9-12S LiPo
9070 g
5445 g
80 Amp
12S
16 x 8 to 18 x 8 Electric
GPMG4800
RimFire 50 cc
80 mm
75 mm
230
5000 W
6500 W
1250 g
10 mm
33,3 - 55,5 V / 9-15S LiPo
12,7 kg
8,17 kg
120 Amp 12S
22 x 8 to 26 x 10
GPMG4805
RimFire 65 cc
80 mm
85 mm
160
6500 W
8400 W
1480 g
10 mm
33,3 - 55,5 V / 9-15S LiPo
19,1 kg
11,79 kg
120 Amp 12S
22 x 10 to 26 x 12
RimFire .60
Order no.: GPMG4745
23
Order no.
Diameter
Length
Shaft
Shaft
diameter length
kV
4110
Weight
Rated voltage
range
Continuous Continuous
current
power
Surge
current
Surge
power
Idling
current
Plugdiameter
Recommended propeller
at rated voltage
(in x in)
GPMG5110
12 mm
30 mm
1,5 mm
8,5 mm
6g
7,4 - 11,1 V
2.0 A
22,2 W
4,5 A
50 W
0,3 A
2 mm
7,4S - 9 x 4,7S
GPMG5140
20 mm
40 mm
2 mm
10,5 mm 3500
65 g
7,4 - 11,1 V
12 A
133,2 W
25 A
275 W
1A
2 mm
10 x 4,5S - 12 x 8S
GPMG5155
24 mm
33 mm
3 mm
12 mm
3180
67 g
7,4 - 11,1 V
15 A
166,5 W
20 A
220 W
1A
3,5 mm
8 x 6E - 12 x 10E
GPMG5165
24 mm
33 mm
3 mm
12 mm
4040
67 g
7,4 - 11,1 V
18 A
199,8 W
28 A
310 W
1,1 A
3,5 mm
7 x 5E - 12 x 8E
GPMG5170
24 mm
33 mm
3 mm
12 mm
4875
67 g
7,4 - 11,1 V
20 A
222 W
30 A
330 W
1,7 A
3,5 mm
8 x 4E - 10 x 7E
GPMG5185
24 mm
45 mm
3 mm
12 mm
3790
101 g
7,4 - 14,8 V
25 A
277,5 W
50 A
555 W
1,7 A
3,5 mm
10 x 3,5S - 12 x 6S
GPMG5190
28 mm
35 mm
3,2 mm
15 mm
2200
94 g
11,1 - 18,5 V
14 A
259 W
25 A
460 W
0,7 A
3,5 mm
9 x 6E - 12 x 8E
GPMG5195
28 mm
35 mm
3.2 mm
15 mm
2700
94 g
11,1 - 18,5 V
15 A
277,5 W
30 A
555 W
0,8 A
3,5 mm
8 x 6E - 12 x 10E
GPMG5200
28 mm
35 mm
3,2 mm
15 mm
3900
94 g
7,4 - 11,1 V
22 A
244,2 W
45 A
500 W
1,8 A
3,5 mm
10 x 7E - 14 x7 E
GPMG5210
28 mm
45 mm
3,2 mm
15 mm
2100
133 g
7,4 - 14,8 V
21 A
310,8 W
40 A
590 W
0.9 A
3,5 mm
10 x 7E - 17 x 8E
GPMG5215
28 mm
45 mm
3,2 mm
15 mm
2700
133 g
7,4 - 18,5 V
28 A
518 W
50 A
925 W
1,5 A
3,5 mm
8 x 6E - 14 x 7E
GPMG5220
28 mm
45 mm
3,2 mm
15 mm
3600
133 g
7,4 - 14,8 V
40 A
592 W
70 A
1035 W
2,3 A
3,5 mm
9 x 6E - 15 x 10E
GPMG5225
28 mm
56 mm
3,2 mm
15 mm
1530
166 g
11,1 - 18,5 V
23 A
425,5 W
45 A
830 W
0,8 A
3,5 mm
11 x 8E - 16 x 8E
GPMG5245
36 mm
30 mm
5 mm
15 mm
4000
138 g
14,8 - 18,5 V
20 A
370 W
37 A
685 W
3,7 A
4 mm
8 x 4E - 10 x 5E
GPMG5290
36 mm
50 mm
5 mm
15 mm
2300
243 g
14,8 - 18,5 V
60 A
1110 W
100 A
1850 W
2,0 A
4 mm
10 x 7E - 13 x 8E
GPMG5315
36 mm
56 mm
5 mm
15 mm
1800
283 g
14,8 - 22,2 V
50 A
1110 W
90 A
2000 W
1,9 A
4 mm
10 x 7E - 18 x 10E
GPMG5325
36 mm
88 mm
5 mm
15 mm
1280
461 g
–
–
–
–
–
–
4 mm
–
AMMO Brushless Inrunner Motors
ø 12
AMMO 12-30 4110 kV
Order no. GPMG5110
24
ø 20
AMMO 20-40 3500 kV
Order no. GPMG5140
ø 24
AMMO 24-33 3180 kV
Order no. GPMG5155
ø 28
AMMO 28-45 2700 kV
Order no. GPMG5215
MS-1 1/10 Sensored
Brushless ESC
Order no.: TKPM0010
Rated Current . . 100A
Input Voltage . . 2-3S LiPo
BEC . . . . . . . . . . 6.0V/3A
Weight . . . . . . . 1.94oz (55g)
Dimensions . . . 0.94 x 1.3 x 1.4 in
. . . . . . . . . . . . . (24 x 33 x 36mm)
Programmable Features:
Low voltage cutoff, drag brake, advanced timing,
start power, drive mode and motor direction.
8.5T (4200 kV)
Sensored-Brushless Motor
Order no.: TKPC5025
6.5T (5500 kV)
Sensored Brushless Motor
Order no.: TKPC5015
7.5T (5000 kV)
Sensored Brushless Motor
Order no.: TKPC5020
6.5T
BL System MS-1 ESC/Motor
Order no.: TKPC6015
7.5T
BL System MS-1 ESC/Motor
Order no.: TKPC6020
Brushless Motors for RC-Cars
ø 36
AMMO 36-50 2300 kV
Order no. GPMG5290
8.5T
BL System MS-1 ESC/Motor
Order no.: TKPC6025
TrakPower
MS Series 6.5T Brushless Motor Fr/End Bell
Order no.: TKPC7106
TrakPower
MS Series 8.5T Brushless Motor Fr/End Bell
Order no.: TKPC7108
25
Accessories
MS Brushless
Motor Bearings (2)
Order no.: TKPC7210
MS BL Motor Sensor Board
Order no.: TKPC7230
MS BL Motor Rotor 12.5 mm
Order no.: TKPC7240
Motors
not illustrated
Woven Sensor wire 175 mm
Order no.: TKPC7255
Sensor-Clip/Washer/
Screw
Order no.: TKPC7260
MS BL Motor Timing Ring
Order no.: TKPC7270
Brushless Accessories for RC-Cars
26
2S Balancer
Lead XH Adapter
Order no.: TKPP5610
4S Balancer
Lead XH Adapter
Order no.: TKPP5612
36-56-1800kV Brushless Marine Motor
Order no: AQUG7002
Brushless motor, specially configured for
use with high-performance racing boats.
Used with: Order no: AQUB20xx,
UL-1 Superior
Technical Specification:
Housing length
56 mm
Housing diameter
36 mm
Weight
212 g
Shaft length
15 mm
Shaft diameter
5 mm
Revolutions/Volt
2030 kV
No. of poles
6
Connection system
4 mm
Operating voltage
7-18.5V
Max. continuous current
50A
Max. peak current
80A / 5 sek.
Brushless motor, specially configured for use
with high-performance racing boats.
Used with: Order no: AQUB24xx, Revolt 30 /
Order no: AQUB2105, Lucas Oil /
Order no: AQUB2100, Motley Crew
Technical Specification:
Housing length
56 mm
Housing diameter
36 mm
Weight
212 g
Shaft length
15 mm
Shaft diameter
5 mm
Revolutions/Volt
1800 kV
No. of poles
6
Connection system
4 mm
Operating voltage
7-18.5V
Max. continuous current
50A
Max. peak current
80A / 5 sek.
Brushless Motors for Boats
ESC
MS-1 25V 330 F
Capacitor Unit
Order no.: TKPC7300
36-56-2030kV Brushless Marine Motor
Order no: AQUG7001
Balancer HC Lead
Banana to 4+2mm Bullet
Order no.: TKPP5618
60A Brushless ESC
Order no: AQUM7011
Water cooled brushless ESC, specially configured for use with high-performance racing boats.
Used with: Order no: AQUB20xx UL-1 Superior / Order no: AQUB24xx Revolt 30 /
Order no: AQUB2105 Lucas Oil / Order no: AQUB2100 Motley Crew
Technical Specification:
Length
83 mm
Operating voltage range . . . . . 8–20V (with BEC up to 14.8V)
Width
38 mm
Low voltage cut-off
11.63 V
Weight
109 g
Frequency
8 kHz
Connecting cable
2.5 mm
BEC
5.2 V/2A
Internal resistance
0.003 Ohm Connecting system
4 mm (to motor)
Connecting system
2x T-plug (to battery)
27
P
The PulseTec906 Charger is a touch screen micro-processor charging unit with which all common
The PulseTec354 Charger has a robust aluminium housing, and a two-line liquid crystal
display showing all information relevant to the charging cycle and battery condition.
Programming and setting of parameters is achieved via four buttons on the upper surface of
the housing. Charging (4mm jacks) and balancer terminals are located on the right side of the
housing, and connection to car battery or mains adaptor takes place via two strong crocodile clips.
A switched mains adaptor with 12 V 5A output is supplied for connection to 230 V AC mains power.
The PulseTec906 has a lithium battery balancer function, which ensures that each and every pack
cell is charged to the exact same capacity, as well as being equipped with a USB interface and a
terminal for a temperature sensor. The PulseTec906 Charger Touch has a robust aluminium housing
with internal cooling fan. Programming and entering of parameters is achieved via the graphic touch
screen. The right side of the housing carries charging output (4 mm jacks) and balancer board connection,
whilst on the left, the mini-USB, temperature sensor, 220 V mains input, AK610AC car battery/12 V DC
mains adaptor connections are to be found. With all this, the PulseTec906 Charger is the perfect choice for
at home or in the field.
ulseTec354 is a compact microprocessor charging unit with which all common
model sport batteries can be professionally charged. The PulseTec354 is especially
programmed to charge NiCd, NiMH, LiPo/LiFe/LiIo and Pb batteries. A special feature
of the PulseTec354 is the lithium battery balancer function, which ensures that
each and every pack cell is charged to the exact same capacity. In addition, the
PulseTec354 Charger is equipped with a terminal for a temperature sensor.
model sport batteries can be professionally charged. The PulseTec906 software contains programs
for charging NiCd, NiMH, LiPo/LiFe/LiIo and Pb batteries, and with the large clear touch display
and intuitve menus, even the inexperienced will quickly learn to use the PulseTec906 with
confidence.
With the PulseTec354 you have the choice of a high-performance charging unit with professional features,
which will fulfil almost all model sport requirements, and whose compact dimensions, coupled with high
performance, make the PulseTec354 unbeatable value for money!
Technical Specification:
Power. . . . . . . . . . . . . max. 35W
Input voltage. . . . . . . 11-18V DC
Charging current . . . . 0.1-3.0A
Balancing current. . . . <300mA
Balancer tolerance. . . ±0.01V
Weight. . . . . . . . . . . . 175g
Dimensions . . . . . . . . 116x75x25mm
PulseTec354
Order no.: HCAP0180
Delivery includes:
- Charging unit PulseTec 354
- Switched mains adaptor 12V, 5A with 230V connecting
cord
- Charge cable with TAM/standard connector
- Charge cable with T plug connector
- XH balancer adapter (2S, 3S, 4S)
- DC cable (power supply) with crocodile clips
Accessories for all PulseTec Chargers:
- All charging cables with 4mm male connectors
compatible
28
With the PulseTec906 you have the choice of a high-performance, user-friendly charger with professional
features, which will fulfil all the normal requirements of model sport. Comprehensive software functions and
high performance make the PulseTec906 a very attractive value for money prospect!
Features:
- Microprocessor charging unit for NiCd, NiMH, LiPo/LiFe/LiIo & Pb
batteries
• Clear blue-illuminated LC-Display (adjustable brightness)
• High quality aluminium housing
• Special charging programs for all main battery types
• Integrated balancer for LiPo, LiFe, LiIo battery packs
• Charging current 0,1-3,0A
• Terminal for temperature sensor
• Automatic charge-end recognition with delta-peak cut-off
• Adjustable delta-peak sensitivity (5-20mV)
• Integrated cooling fan
NiCd, NiMH batteries:
Cell number: 1-10 cells; capacity: from 0.1Ah
LiPo, LiFe, LiIo batteries:
Cell number: 1-4 cells; capacity: from 0.1Ah
PB batteries:
Cell number: 2-12 V; capacity: from 1Ah
• Safety cut-off of charging cycle when the pre-set max.
permissible capacity is reached (10-20000mAh)
• Safety cut-off of charging cycle when the pre-set
max. permissible charging time has elapsedd (10-720 min)
• Monitoring of input voltage & cut-off of charging cycle when
supply falls below min. input voltage
• Comprehensive operating instructions
• Easy to use
PulseTec906
Order no.: HCAP0185
Delivery includes:
- Charging unit PulseTec906
- 230V power cord
- DC cable (power supply) with
crocodile clips
- Charging cables T plug, JR, BEC,
crokodile, glow plug, connectors
- XH balancer adaptor
- Touch screen stylus
Features:
- Microprocessor charging unit for NiCd,
NiMH, LiPo/LiFe/LiIo & Pb batteries
Technical Specification: 32-bit MCU
Charging power. . . . . . . . . max. 90W
Discharge power . . . . . . . . max. 20W
Supply voltage. . . . . . . . . . AC 100-240V /
. . . . . . . . . . . . . . . . . . . . . . DC 11-18V
Charging current . . . . . . . . 0.1-10.0A
Discharge current. . . . . . . . 0.1-5.0A
Balancing current. . . . . . . . <300mA
Balancer tolerance. . . . . . . ±0.01V
- Charging, discharging, balancing + storage (Lithium batteries)
- Innovative, convenient operation via easily read touch screen display
- High quality aluminium housing
- Special charge/discharge programs for every battery type
- Integrated balancer for LiPo, LiFe, LiIo, battery packs
- Charging current 0.1-10.0A
- Discharge current 0.1-5.0A
- Mini USB receptacle for connection to PC (Firmware Update)
- Connection for temperature sensor (Sensor separately available)
- Special cycle programs for battery breaking-in and maintenance
- Automatic charge-end recognition with adjustable delta peak cut-off
- Adjustable trickle charge current for NiMH, NiCd, & Pb batteries
- Adjustable delta peak sensitivity
Weight. . . . . . . . . . . . . . . . 710g
Dimensions . . . . . . . . . . . . 142x155x55mm
NiCd, NiMH batteries:
Cell number: 1-16 cells; capacity : from 0.1Ah
LiPo, LiFe, LiIo, batteries:
Cell number:1-6 cells; capacity: from 0.1Ah
PB batteries:
Cell number: 2-12V; capacity: from 1Ah
- Current battery status (total voltage, individual cell voltages, internal resistance)
- Graphic rendering of the charging cycle
- Integrated cooling fan
- DC power mode (can simultaneously function as 90 W mains adaptor with
variable voltage (3.0 – 24 V) )
- Safety cut-off of charging cycle when the pre-set max. permissible capacity is
reached
- Safety cut-off of charging cycle when the pre-set max. permissible charging
time has elapsed
- Monitoring of input voltage & cut-off of charging cycle when supply falls below
min. input voltage
- Comprehensive operating instructions
- Easy to use
29
The PulseTec2006D Charger is a microprocessor charging unit with which all common model sport
batteries can be professionally charged. The PulseTec2006D software contains special charging
programs for NiCd, NiMH, LiPo, LiFe, and Pb batteries. A distinctive feature of the PulseTec2006D
Charger is the two equivalent outputs which can be used completely independently of each
other. For example, output 1 could charge a LiPo battery, whilst output 2 discharges a NiMH
battery. During operation, the display can be simply switched between outputs 1 and 2. In
addition, the PulseTec2006D Charger is equipped with a terminal for a temperature sensor.
ElectriFly LiPo battery packs
Order no.
The PulseTec2006D Charger has a sturdy aluminium housing, and a large two-line LC display
which shows all relevant information concerning the charging cycle and the status of the
connected batteries. Programming and parameter setting is done by means of 6 dust-protected
soft-touch keys on the housing top. The left side of the PulseTec2006D carries charge output 1
(4 mm jacks), balancer output 1, temperature sensor connection, and 220 V mains supply connection,
whilst on the right side, charge output 2 (4 mm jacks), balancer output 2 and the connection for car
battery or 12 V DC mains adapter can be found.
With the PulseTec2006D you have the choice of a high-performance charging unit with professional features,
which will fulfil almost all model sport requirements. Innumerable features coupled with high performance
make the PulseTec2006D an unbeatable bargain!
Cells
GPMP0760
1S
Rated
voltage
3,7 V
Capacity
140 mAh
CValue
20 C
Wh
Type
Plug Connector
Balancer
Dimensions
(L x W x H)
35 x 12 x 6 mm
Weight
0,5
Soft Case
Power Connerctor
GPMP0810
2S
7,4 V
250 mAh
20 C
1,9
Soft Case
Deans Micro
XH
38 x 19 x 11 mm
18 g
GPMP0820
2S
7,4 V
600 mAh
25 C
4,4
Soft Case
Deans Micro
XH
52 x 31 x 19 mm
51 g
4,2 g
GPMP0821
3S
11,1 V
600 mAh
25 C
6,7
Soft Case
Deans Micro
XH
52 x 31 x 19 mm
51 g
GPMP0826
3S
11,1 V
850 mAh
25 C
9,4
Soft Case
Deans (T-Plug)
XH
52 x 31 x 24 mm
80 g
GPMP0830
3S
11,1 V
1000 mAh
30 C
11,1
Soft Case
Deans (T-Plug)
XH
66 x 36 x 18 mm
96 g
GPMP0835
2S
7,4 V
1200 mAh
30 C
8,9
Soft Case
Deans (T-Plug)
XH
85 x 35 x 11 mm
75 g
GPMP0836
3S
11,1 V
1200 mAh
30 C
13,3
Soft Case
Deans (T-Plug)
XH
85 x 35 x 18 mm
106 g
GPMP0840
3S
11,1 V
1300 mAh
30 C
14,4
Soft Case
Deans (T-Plug)
XH
67 x 36 x 24 mm
112 g
GPMP0845
3S
11,1 V
1500 mAh
30 C
16,7
Soft Case
Deans (T-Plug)
XH
85 x 35 x 21 mm
135 g
GPMP0850
3S
11,1 V
1600 mAh
30 C
17,8
Soft Case
Deans (T-Plug)
XH
75 x 43 x 22 mm
141 g
GPMP0855
3S
11,1 V
1800 mAh
30 C
20,0
Soft Case
Deans (T-Plug)
XH
86 x 35 x 25 mm
160 g
GPMP0861
3S
11,1 V
2200 mAh
30 C
24,4
Soft Case
Deans (T-Plug)
XH
102 x 35 x 24 mm
174 g
GPMP0862
4S
14,8 V
2200 mAh
30 C
32,6
Soft Case
Deans (T-Plug)
XH
102 x 35 x 32 mm
235 g
GPMP0870
2S
7,4 V
3200 mAh
25 C
23,7
Soft Case
Deans (T-Plug)
XH
134 x 44 x 14 mm
183 g
GPMP0871
3S
11,1 V
3200 mAh
25 C
35,5
Soft Case
Deans (T-Plug)
XH
134 x 44 x 21 mm
267 g
GPMP0760 = replacement battery for Flyzone Micro-aircraft Series
PulseTec2006D
Order no.: HCAP0190
Delivery includes:
- Charging unit PulseTec2006D
220 V power cord
- DC cable (power supply) with
4 mm gold connectors and
additional crocodile clips
- 1x charging cable with T plug
connection
- 1x charging cable with TAM/
standard connection
- 2x XH balancer adaptor
30
Features:
-
Technical Specification: 32-bit MCU
microprocessor-controlled high-performance unit
Charging power . . . . . . . . . .max. 2x100W
Discharge power . . . . . . . . .max. 2x20W
Supply voltage . . . . . . . . . . .AC 100-240V /
. . . . . . . . . . . . . . . . . . . . . . .DC 11-18V
Charging current . . . . . . . . .2x0.1-8.0A
Discharge current . . . . . . . . .2x0.1-5.0A
Balancing current . . . . . . . . .<250mA
Microprocessor charging unit for NiCd, NiMH, LiPo/LiFe/LiIo & Pb batteries
Charging, discharging, balancing + storage (Lithium batteries)
Two independent charger outputs
High quality aluminium housing
Clear, blue-lit LC display (adjustable brightness)
Special charge/discharge programs for every battery type
Integrated balancer for LiPo, LiFe, LiIo, battery packs
Charging current 0.1-10.0A
Discharge current 0.1-5.0A
Connection for temperature sensor (Sensor separately available)
Special cycle programs for battery breaking-in and maintenance
Automatic charge-end recognition with adjustable delta peak cut-off
-
Balancer tolerance . . . . . . . .±0.01V
Weight . . . . . . . . . . . . . . . . .1250g
Dimensions . . . . . . . . . . . . .208x170x63mm
NiCd, NiMH batteries:
Cell number: 1-16 cells; capacity: from 0.1Ah
LiPo, LiFe, LiIo batteries:
Cell number:1-6 cells; capacity: from 0.1Ah
PB batteries:
Cell number: 2-12V; capacity: from 1Ah
Adjustable trickle charge current for NiMH, NiCd, & Pb batteries
Adjustable delta peak sensitivity
Current battery status (total voltage, individual cell voltages)
Integrated cooling fan
Safety cut-off of charging cycle when the pre-set max. permissible capacity is reached
Safety cut-off of charging cycle when the pre-set max. permissible charging time has
elapsed
Monitoring of input voltage & cut-off of charging cycle when supply falls below
min. input voltage
DC power mode (can via the XT60 connection simultaneously function as 200 W
mains adaptor with variable voltage (3.0 – 24 V) )
Detailed comprehensive operating instructions
Easy to use
LiPo battery packs
Lighter. Smaller. Stronger. Better.
★ LiPo high performance cells for all applications
★ Compact dimensions
★ Light weight
★ Special connectors reduce heat development
★ Outstanding value for money!
31
25C FlightPower LiPo Battery Series
Plug type
1S
Order no.
FPWP3042
Description
LiPo FP30
Number of cells Rated voltage
2S
7,4 V
Capacity
450 mAh
Dimensions
53 x 31 x 8 mm
Weight
25 g
7g
1S
FPWP3043
LiPo FP30
3S
11,1 V
450 mAh
53 x 31 x 12 mm
40 g
Micro
14 g
13 g
Micro
Micro
FPWP3083
LiPo FP30
3S
11,1 V
800 mAh
70 x 26 x 18 mm
68 g
Deans (T plug)
Micro
FPWP3103
FPWP3122
LiPo FP30
LiPo FP30
3S
2S
11,1 V
7,4 V
1000 mAh
1200 mAh
65 x 36 x 18 mm
103 x 33 x 10 mm
83 g
82 g
Deans (T plug)
Deans (T plug)
40 g
Micro
FPWP3123
LiPo FP30
3S
11,1 V
1200 mAh
103 x 33 x 15 mm
118 g
Deans (T plug)
38 g
Micro
FPWP3153
LiPo FP30
3S
11,1 V
1500 mAh
102 x 35 x 17 mm
130 g
Deans (T plug)
54 x 31 x 16 mm
54 g
Micro
FPWP3183
LiPo FP30
3S
11,1 V
1800 mAh
103 x 35 x 21 mm
155 g
Deans (T plug)
800 mAh
70 x 25 x 12 mm
42 g
Deans (T plug)
FPWP3222
LiPo FP30
2S
7,4 V
2200 mAh
103 x 33 x 16 mm
126 g
Deans (T plug)
11,1 V
800 mAh
70 x 25 x 18 mm
65 g
Deans (T plug)
FPWP3223
LiPo FP30
3S
11,1 V
2200 mAh
103 x 33 x 23 mm
178 g
Deans (T plug)
2S
7,4 V
800 mAh
70 x 25 x 12 mm
42 g
Deans (T plug)
FPWP3224
LiPo FP30
4S
14,8 V
2200 mAh
103 x 33 x 32 mm
247 g
Deans (T plug)
LiPo FP25 TREX®
3S
11,1 V
800 mAh
70 x 25 x 18 mm
65 g
Deans (T plug)
FPWP3225
LiPo FP30
5S
18,5 V
2200 mAh
103 x 33 x 39 mm
294 g
Deans (T plug)
FPWP2102
LiPo FP25
2S
7,4 V
1000 mAh
65 x 36 x 12 mm
58 g
Deans (T plug)
FPWP3226
LiPo FP30
6S
22,2 V
2200 mAh
103 x 33 x 46 mm
341 g
Deans (T plug)
FPWP2103
LiPo FP25
3S
11,1 V
1000 mAh
65 x 36 x 18 mm
83 g
Deans (T plug)
FPWP3242
LiPo FP30
2S
7,4 V
2450 mAh
132 x 40 x 10 mm
145 g
Deans (T plug)
FPWP2132
LiPo FP25
2s
7,4 V
1300 mAh
67 x 33 x 14 mm
77 g
Deans (T plug)
FPWP3243
LiPo FP30
3S
11,1 V
2450 mAh
132 x 40 x 15 mm
215 g
Deans (T plug)
FPWP2133
LiPo FP25
3S
11,1 V
1300 mAh
67 x 33 x 20 mm
98 g
Deans (T plug)
FPWP3244
LiPo FP30
4S
14,8 V
2450 mAh
132 x 40 x 20 mm
270 g
Deans (T plug)
FPWP2162
LiPo FP25
2S
7,4 V
1600 mAh
63 x 40 x 12 mm
71 g
Deans (T plug)
FPWP3246
LiPo FP30
6S
22,2 V
2450 mAh
132 x 40 x 32 mm
400 g
Deans (T plug)
FPWP2163
LiPo FP25
3s
11,1 V
1600 mAh
63 x 40 x 20 mm
121 g
Deans (T plug)
FPWP3302
LiPo FP30
2S
7,4 V
3000 mAh
128 x 37 x 16 mm
158 g
Deans (T plug)
FPWP2182
LiPo FP25
2S
7,4 V
1800 mAh
102 x 35 x 13 mm
100 g
Deans (T plug)
FPWP3303
LiPo FP30
3S
11,1 V
3000 mAh
128 x 37 x 23 mm
235 g
Deans (T plug)
FPWP2183
LiPo FP25
3S
11,1 V
1800 mAh
102 x 35 x 19 mm
145 g
Deans (T plug)
FPWP3332
LiPo FP30
2S
7,4 V
3350 mAh
133 x 40 x 13 mm
178 g
Deans (T plug)
FPWP2212
LiPo FP25
2S
7,4 V
2100 mAh
107 x 32 x 14 mm
119 g
Deans (T plug)
FPWP3333
LiPo FP30
3S
11,1 V
3350 mAh
133 x 40 x 20 mm
267 g
Deans (T plug)
FPWP2213
LiPo FP25
3S
11,1 V
2100 mAh
107 x 32 x 22 mm
172 g
Deans (T plug)
FPWP3334
LiPo FP30
4S
14,8 V
3350 mAh
133 x 40 x 27 mm
356 g
Deans (T plug)
FPWP2214
LiPo FP25
4S
14,8 V
2100 mAh
107 x 32 x 30 mm
225 g
Deans (T plug)
FPWP3335
LiPo FP30
5S
18,5 V
3350 mAh
133 x 40 x 34 mm
445 g
Deans (T plug)
FPWP2252
LiPo FP25
2S
7,4 V
2500 mAh
130 x 40 x 10 mm
144 g
Deans (T plug)
FPWP3336
LiPo FP30
6S
22,2 V
3350 mAh
133 x 40 x 42 mm
534 g
Deans (T plug)
FPWP2253
LiPo FP25
3S
11,1 V
2500 mAh
130 x 40 x 15 mm
193 g
Deans (T plug)
FPWP3382
LiPo FP30
2S
7,4 V
3800 mAh
133 x 42 x 16 mm
227 g
Deans (T plug)
FPWP2254
LiPo FP25
4S
14,8 V
2500 mAh
130 x 40 x 20 mm
274 g
Deans (T plug)
FPWP3383
LiPo FP30
3S
11,1 V
3800 mAh
133 x 42 x 24 mm
323 g
Deans (T plug)
FPWP2256
LiPo FP25
6S
22,2 V
2500 mAh
130 x 40 x 25 mm
375 g
Deans (T plug)
FPWP3384
LiPo FP30
4S
14,8 V
3800 mAh
133 x 42 x 32 mm
419 g
Deans (T plug)
FPWP2332
LiPo FP25
2S
7,4 V
3300 mAh
130 x 43 x 15 mm
175 g
Deans (T plug)
FPWP3385
LiPo FP30
5S
18,5 V
3800 mAh
133 x 42 x 40 mm
515 g
Deans (T plug)
FPWP2333
LiPo FP25
3S
11,1 V
3300 mAh
130 x 43 x 21 mm
255 g
Deans (T plug)
FPWP3386
LiPo FP30
6S
22,2 V
3800 mAh
133 x 42 x 48 mm
617 g
Deans (T plug)
Main characteristics:
FPWP2334
LiPo FP25
4S
14,8 V
3300 mAh
130 x 43 x 28 mm
335 g
Deans (T plug)
FPWP3432
LiPo FP30
2S
7,4 V
4350 mAh
132 x 40 x 16 mm
244 g
Deans (T plug)
★ Continuously optimised cell selection and
configuration
★ Highest quality control standards in the
modelling industry
★ Battery packs from 2S to 7S with capacity
from 125 to 5500 mAh
★ Universal: XH balancer connecting system
FPWP2402
LiPo FP25
2S
7,4 V
4000 mAh
125 x 42 x 16 mm
205 g
Deans (T plug)
FPWP3433
LiPo FP30
3S
11,1 V
4350 mAh
132 x 40 x 24 mm
331 g
Deans (T plug)
FPWP2403
LiPo FP25
3S
11,1 V
4000 mAh
125 x 42 x 24 mm
305 g
Deans (T plug)
FPWP3434
LiPo FP30
4S
14,8 V
4350 mAh
132 x 40 x 32 mm
418 g
Deans (T plug)
FPWP2404
LiPo FP25
4s
14,8 V
4000 mAh
125 x 42 x 32 mm
400 g
Deans (T plug)
FPWP3435
LiPo FP30
5S
18,5 V
4350 mAh
132 x 40 x 40 mm
505 g
Deans (T plug)
FPWP3436
LiPo FP30
6S
22,2 V
4350 mAh
132 x 40 x 50 mm
610 g
Deans (T plug)
FPWP3502
LiPo FP30
2S
7,4 V
5000 mAh
150 x 42 x 20 mm
265 g
Deans (T plug)
FPWP3503
LiPo FP30
3S
11,1 V
5000 mAh
150 x 42 x 26 mm
384 g
Deans (T plug)
FPWP3504
LiPo FP30
4S
14,8 V
5000 mAh
150 x 42 x 34 mm
503 g
Deans (T plug)
FPWP3505
LiPo FP30
5S
18,5 V
5000 mAh
150 x 42 x 42 mm
598 g
Deans (T plug)
FPWP3506
LiPo FP30
6S
22,2 V
5000 mAh
150 x 42 x 50 mm
719 g
Deans (T plug)
The newly set up FlightPower LiPo battery series contains all battery packs
necessary in the realm of electrically-powered models. The new FlightPower
LiPo batteries cover the whole range, from affordable 25C starter up to highperformance 70C battery. The series comprises only selected and up-to-date
LiPo types, so that you receive only the latest technology and best attributes,
such as highest cycle capability, ideally dimensioned connecting leads,
unified XH balancer plug system, model-specific configuration, and best
power/weight ratio.
LiPo Battery Series 25C
32
30C FlightPower LiPo Battery Series
Order no.
FPWP2011
Description
LiPo FP25
Number of cells Rated voltage
1S
3,7 V
Capacity
125 mAh
Dimensions
41 x 12 x 5 mm
Weight
5g
FPWP2021
LiPo FP25
1S
3,7 V
250 mAh
31 x 20 x 7 mm
FPWP2022
FPWP2023
LiPo FP25
LiPo FP25
2S
3S
7,4 V
11,1 V
250 mAh
250 mAh
32 x 20 x 14 mm
33 x 20 x 22 mm
FPWP2032
LiPo FP25
2S
7,4 V
350 mAh
70 x 25 x 6 mm
29 g
FPWP2033
LiPo FP25
3S
11,1 V
350 mAh
70 x 25 x 10 mm
FPWP2062
LiPo FP25
2S
7,4 V
600 mAh
53 x 31 x 11 mm
FPWP2063
LiPo FP25
3S
11,1 V
600 mAh
FPWP2082
LiPo FP25
2S
7,4 V
FPWP2083
LiPo FP25
3S
FPWP2092
LiPo FP25 BLade®
FPWP2093
LiPo Battery Series 30C
Plug type
Micro
33
50C FlightPower LiPo Battery Series
Order no.
Description
70C FlightPower LiPo Battery Series
Rated
voltage
11,1 V
Capacity
Dimenstions
Weight
Plug type
Order no.
Description
FPWP5183
LiPo FP50
1800 mAh
103 x 35 x 22 mm
165 g
Deans (T plug)
FPWP7133
LiPo FP70
Number
of cells
3S
1300 mAh
103 x 35 x 17 mm
122 g
Deans (T plug)
DTXC1861
LiPo Hardcase
4000 mAh
Dimensions
(L x W x H)
135 x 45 x 24 mm
FPWP5223
LiPo FP50
3S
11,1 V
2200 mAh
103 x 34 x 23 mm
199 g
Deans (T plug)
FPWP7213
LiPo FP70
3S
11,1 V
2150 mAh
103 x 35 x 26 mm
190 g
Deans (T plug)
DTXC1862
LiPo Hardcase
2S
25
7,4 V
4000 mAh
135 x 45 x 24 mm
256 g
Traxxas
FPWP5253
LiPo FP50
3S
11,1 V
2550 mAh
133 x 42 x 16 mm
221 g
Deans (T plug)
FPWP7214
LiPo FP70
4S
14,8 V
2150 mAh
103 x 35 x 34 mm
255 g
Deans (T plug)
DTXC1864
LiPo Hardcase
2S
25
7,4 V
5000 mAh
135 x 45 x 24 mm
288 g
Deans (T plug)
FPWP5254
FPWP5255
LiPo FP50
LiPo FP50
4S
5S
14,8 V
18,5 V
2550 mAh
2550 mAh
133 x 42 x 21 mm
133 x 42 x 25 mm
283 g
345 g
Deans (T plug)
Deans (T plug)
FPWP7276
FPWP7333
LiPo FP70
LiPo FP70
6S
3S
22,2 V
11,1 V
2700 mAh
3300 mAh
130 x 43 x 39 mm
130 x 43 x 24 mm
450 g
272 g
Deans (T plug)
Deans (T plug)
DTXC1865
DTXC1964
LiPo Hardcase
LiPo Hardcase
2S
2S
25
35
7,4 V
7,4 V
5000 mAh
5000 mAh
135 x 45 x 24 mm
135 x 45 x 24 mm
288 g
288 g
Traxxas
Deans (T plug)
FPWP5363
LiPo FP50
3S
11,1 V
3600 mAh
130 x 34 x 27 mm
311 g
Deans (T plug)
FPWP7334
LiPo FP70
4S
14,8 V
3300 mAh
130 x 43 x 31 mm
363 g
Deans (T plug)
DTXC1965
LiPo Hardcase
2S
35
7,4 V
5000 mAh
135 x 45 x 24 mm
288 g
Traxxas
FPWP5364
LiPo FP50
4S
14,8 V
3600 mAh
130 x 34 x 38 mm
400 g
Deans (T plug)
FPWP7386
LiPo FP70
6S
22,2 V
3800 mAh
153 x 44 x 45 mm
625 g
Deans (T plug)
DTXC2034
NiMH Stick
6
-
7,2 V
2000 mAh
131 x 47 x 24 mm
279 g
Deans (T plug)
FPWP5365
LiPo FP50
5S
18,5 V
3600 mAh
130 x 34 x 49 mm
490 g
Deans (T plug)
FPWP7446
LiPo FP70
6S
22,2 V
4400 mAh
153 x 44 x 52 mm
715 g
Deans (T plug)
DTXC2035
NiMH Stick
6
-
7,2 V
2000 mAh
131 x 47 x 24 mm
279 g
TAM-/Standard
FPWP5366
LiPo FP50
6S
22,2 V
3600 mAh
130 x 34 x 60 mm
580 g
Deans (T plug)
FPWP7503
LiPo FP70
3S
11,1 V
5000 mAh
153 x 44 x 30 mm
405 g
Deans (T plug)
DTXC2038
NiMH Stick
6
-
7,2 V
2000 mAh
131 x 47 x 24 mm
279 g
Traxxas
FPWP5503
LiPo FP50
3S
11,1 V
5000 mAh
126 x 42 x 30 mm
400 g
Deans (T plug)
FPWP7504
LiPo FP70
4S
14,8 V
5000 mAh
153 x 44 x 39 mm
545 g
Deans (T plug)
DTXC2054
NiMH Stick
6
-
7,2 V
3000 mAh
131 x 47 x 24 mm
360 g
Deans (T plug)
FPWP5504
LiPo FP50
4S
14,8 V
5000 mAh
126 x 42 x 40 mm
504 g
Deans (T plug)
FPWP7505
LiPo FP70
5S
18,5 V
5500 mAh
154 x 44 x 54 mm
745 g
Deans (T plug)
DTXC2055
NiMH Stick
6
-
7,2 V
3000 mAh
131 x 47 x 24 mm
360 g
TAM-/Standard
FPWP5505
LiPo FP50
5S
18,5 V
5000 mAh
126 x 42 x 50 mm
608 g
Deans (T plug)
FPWP7556
LiPo FP70
6S
22,2 V
5500 mAh
154 x 44 x 64 mm
890 g
Deans (T plug)
DTXC2058
NiMH Stick
6
-
7,2 V
3000 mAh
131 x 47 x 24 mm
360 g
Traxxas
FPWP5506
LiPo FP50
6S
22,2 V
5000 mAh
126 x 42 x 60 mm
712 g
Deans (T plug)
FPWP7557
LiPo FP70
7S
25,9 V
5500 mAh
154 x 44 x 75 mm
1040 g
Deans (T plug)
DTXC2063
NiMH Stick
6
-
7,2 V
5000 mAh
135 x 47 x 24 mm
442 g
TAM-/Standard
FPWP5553
LiPo FP50
3S
11,1 V
5000 mAh
130 x 45 x 34 mm
395 g
Deans (T plug)
DTXC2064
NiMH Stick
6
-
7,2 V
5000 mAh
135 x 47 x 24 mm
442 g
Traxxas
FPWP5554
LiPo FP50
4S
14,8 V
5000 mAh
130 x 45 x 45 mm
525 g
Deans (T plug)
DTXM2012
NiMH receiver battery, Hump
-
-
6V
1600 mAh
51 x 31 x 32 mm
124 g
JR plug
FPWP5555
LiPo FP50
5S
18,5 V
5000 mAh
130 x 45 x 56 mm
650 g
Deans (T plug)
DTXM2017
NiMH receiver battery, Flat
-
-
6V
1600 mAh
85 x 31 x 17 mm
124 g
JR plug
FPWP5556
LiPo FP50
6S
22,2 V
5000 mAh
130 x 45 x 66 mm
780 g
Deans (T plug)
LiPo Battery Series
Main characteristics:
★ Continuously optimised cell selection and
configuration
★ Highest quality control standards in the
modelling industry
★ Battery packs from 2S to 7S with capacity
from 125 to 5500 mAh
★ Universal: XH balancer connecting system
34
Onyx Racing batteries
Number
of cells
3S
50-70C /
Rated
voltage
11,1 V
Capacity
Dimenstions
Weight
Plug type
Order no.
Description
Number
Cof cells Value
2S
25
Rated
voltage
7,4 V
Capacity
Weight
Plug system
256 g
Deans (T plug)
Racing and receiver batteries
LiPo Receiver batteries
FlightPower LiPo Receiver batteries
Order no.
Description
FPRX Rx
Number
of cells
2S
Rated
voltage
7,4 V
FPWM0132
FPWM0162
Capacity
1300 mAh
FPRX Rx
2S
7,4 V
1600 mAh
FPWM0192
FPRX Rx
2S
7,4 V
1900 mAh
FPWM0212
FPWM0322
FPRX Rx
FPRX Rx
2S
2S2P
7,4 V
7,4 V
FPWM0422
FPRX Rx
2S2P
7,4 V
Dimenstions
Weight
Plug type
65 x 36 x 14 mm
65 g
2 x JR plug
65 x 41 x 12 mm
68 g
2 x JR plug
103 x 35 x 14 mm
100 g
2 x JR plug
2100 mAh
3200 mAh
113 x 33 x 12 mm
67 x 44 x 28 mm
103 g
168 g
2 x JR plug
2 x JR plug
4200 mAh
108 x 34 x 30 mm
238 g
2 x JR plug
35
Hardcase LiPo Batteries
Order no.
Description
Number
Cof cells Value
1S
70
Rated
voltage
3,7 V
Capacity
TKPC0460
LiPo Hardcase
6400 mAh
Dimensions
(L x W x H)
138 x 49 x 47 mm
Weight
Plug system
597 g
4 mm female
TKPC0505
LiPo Hardcase „Shorty”
2S
80
7,4 V
4600 mAh
138 x 49 x 47 mm
597 g
4+2 mm female
TKPC0395
LiPo Hardcase
2S
60
7,4 V
5600 mAh
138 x 49 x 47 mm
597 g
4+2 mm female
TKPC0515
TKPC0525
LiPo Hardcase
LiPo Hardcase
2S
2S
80
80
7,4 V
7,4 V
6000 mAh
7200 mAh
138 x 49 x 47 mm
138 x 49 x 47 mm
597 g
597 g
4+2 mm female
4+2 mm female
TKPC0420
LiPo Hardcase Saddle Pack
2S
60
7,4 V
5400 mAh
138 x 49 x 47 mm
597 g
4 mm female
TKPC0530
LiPo Hardcase Saddle Pack
2S
80
7,4 V
6000 mAh
138 x 49 x 47 mm
597 g
4 mm female
TKPC0270
LiPo Hardcase
2S
50
7,4 V
6200 mAh
137 x 45 x 25 mm
315 g
TKPC0510
LiPo Hardcase
2S
80
7,4 V
6000 mAh
138 x 47 x 25 mm
311 g
TKPC0520
LiPo Hardcase
2S
80
7,4 V
7200 mAh
138 x 47 x 25 mm
311 g
TKPC0450
LiPo Hardcase
4S
60
14,8 V
5600 mAh
138 x 49 x 47 mm
597 g
TKPC0535
LiPo Hardcase
4S
80
14,8 V
6700 mAh
138 x 48 x 45 mm
661 g
TKPC0455
LiPo Hardcase
6S
60
22,2 V
3400 mAh
138 x 49 x 47 mm
597 g
Deans (T plug)
XH-Balancer
Deans (T plug)
XH-Balancer
Deans (T plug)
XH-Balancer
Deans (T plug)
XH-Balancer
Deans (T plug)
XH-Balancer
Deans (T plug)
XH-Balancer
Hardcase LiPo Batteries/Powerboat LiPo Batteries
GrimRacer
Powerboat LiPo Batteries
GrimRacer LiPo battery packs were specified, developed
and tested specifically for use with racing boats by
Mike “Grimracer” Zaborowski, an experienced multiple
US. Champion.
Due to the high load capacity of their
5.25 mm² cross-section discharge cables,
they give a never before achieved level
of performance in comparison to other
LiPo battery packs.
36
Description
Parallel Adaptor 2 Deans
Ultra Plug to 1 Deans Ultra
Female
Order no.: GPMM3142
Serial Adaptor 2 Deans
Ultra Plug to 1 Deans Ultra
Female
Order no.: GPMM3143
Parallel Adaptor 2 Deans
Micro Plug to 1 Deans
Micro Plug
Order no.: GPMM3146
Serial Adaptor 2 Deans
Micro Plug to 1 Deans
Micro Plug
Order no.: GPMM3147
Adaptor Deans Micro
to JST Plug
Order no.: GPMM3135
Adapter Deans-Micro
to JST Female
Order no.: GPMM3134
Adapter Deans Ultra Plug
to Standard Plug
Order no.: GPMM3131
Adaptor Deans Ultra
Female to Standard
Female
Order no.: GPMM3130
Adaptor Deans Micro to
Deans Ultra Plug
Order no.: GPMM3127
Adaptor Deans Micro
to Deans Ultra Female
Order no.: GPMM3126
Charge Lead Banana
Plug/Deans Micro
Order no.: GPMM3149
Charge Lead Banana
Plug/Deans Ultra Plug
Order no.: GPMM3148
Charge Lead Banana
Plug/Heli-Max Micro Plug
Order no.: GPMM3150
Charge Lead Banana
Plug/Ven MQ CC RS4
Order no.: DTXC2223
Charge
Lead Banana
Plug/Standard Female
Order no.: DTXC2220
Adaptor 3.5 mm Gold
Plug to Deans Ultra Plug
Female
Order no.: SUPM0010
Adaptor Deans Ultra
Plug to 3.5 mm Female
Order no.: SUPM0040
Adaptor 4 mm Bullet
to 3.5 mm Female,
gold-plated
Order no.: GPMM3123
Adaptor 4 mm Bullet
to 6 mm Female,
gold-plated
Order no.: GPMM3118
Adaptor 6 mm Bullet
to 4 mm Female,
gold-plated
Order no.: GPMM3119
Connectors & Adapters
Powerboat LiPo Batteries
Order no.
Parallel Adapter 1 Deans
Ultra plug to Deans Ultra
Female
Order no.: GPMM3141
Number
Cof cells Value
2S
30
Rated
voltage
7,4 V
Capacity
AQUB9825
GrimRacer Speed Pack
4200 mAh
Dimensions
(L x W x H)
134 x 42 x 19 mm
Weight
Plug system
234 g
Deans (T plug)
AQUB9830
GrimRacer Speed Pack
4S
30
14,8 V
4200 mAh
134 x 42 x 36 mm
451 g
Deans (T plug)
AQUB9835
GrimRacer Speed Pack
2S
40
7,4 V
5000 mAh
158 x 43 x 19 mm
291 g
Deans (T plug)
AQUB9840
GrimRacer Speed Pack
4S
40
14,8 V
5000 mAh
161 x 44 x 38 mm
557 g
Deans (T plug)
Adaptor 2 mm Bullet
Plug to 3.5 mm Female,
gold-plated
Order no.: GPMM3120
Adaptor 3.5 mm Bullet
to 4 mm Female,
gold-plated
Order no.: GPMM3121
Adaptor 3.5 mm Bullet
to 2 mm Female,
gold-plated
Order no.: GPMM3122
37
Gold connectors
BEC gold connector
T plug gold connector
Mini TAM/Standard connector with
gold plated pins
Leads + Connectors
Male
Order no.
HCAQ7091
Description
BEC connector with gold plated pins, Male + Female (2 pairs)
HCAQ7092
BEC connector with gold plated pins, Male (4 pcs)
HCAQ7093
BEC connector with gold plated pins, Female (4 pcs)
G 3.5
G 4.0 long
Description
T plug gold connector, Male + Female (2 pairs)
HCAQ7052
T plug gold connector, Male (4 pcs)
HCAQ7053
T plug gold connector, Female (4 pcs)
Order no.
HCAQ7081
HCAQ7082
HCAQ7083
G 4.0
Male
Description
Mini TAM/Standard connector with gold plated pins, Male +
Female (2 pairs)
Mini TAM/Standard connector with gold plated pins, Male
(4 pcs)
Mini TAM/Standard connector with gold plated pins, Female
(4 pcs)
AMP connector with gold plated pins
Female
G 4.0 short
G 6.0
Description
2.0 mm gold connector, Male + Female (4 pairs)
HCAQ7002
3.5 mm gold connector, Male + Female (4 pairs)
HCAQ7003
4.0 mm gold connector "Long", Male + Female (4 pairs)
HCAQ7004
4.0 mm gold connector "Car", Male + Female (4 pairs)
HCAQ7006
4.0 mm gold connector "Short", Male + Female (4 pairs)
HCAQ7007
6.0 mm gold connector, Male + Female (4 pairs)
HCAQ7008
8.0 mm gold connector, Male + Female (4 pairs)
Order no.
HCAQ7022
Description
Xt60 gold connector, Male + Female (2 Pairs)
HCAQ7023
Xt60 gold connector, Male (4 Pcs)
HCAQ7024
Xt60 gold connector, Female (4 Pcs)
Order no.
HCAQ7121
MPX* gold connector
HCAQ7130
HCAQ7131
Description
2.0 mm gold connector, Male + Female, silicon wire 20 AWG,
10 cm (1 pc)
3.5 mm gold connector, Male + Female, silicon wire 14 AWG,
10 cm (1 pc)
4.0 mm gold connector, Male + Female, silicon wire 14 AWG,
10 cm (1 pc)
Gold connectors with plastic housing, pre-wired
G 2.0
Order no.
HCAQ7152
HCAQ7153
Description
3.5 mm gold connector (3pins), Male, silicon wire 14 AWG,
10 cm (1 pc)
3.5 mm gold connector (3pins), Female, silicon wire 14 AWG,
10 cm (1 pc)
T plug gold connector, pre-wired
G 2.0
3 Pins
Order no.
HCAQ7031
Description
MPX gold connector, Male + Female (2 pairs)
HCAQ7032
MPX gold connector, Male (4 pcs)
HCAQ7033
MPX gold connector, Female (4 pcs)
* registered Trademark of Multiplex Modelsport GmbH & Co KG
Mini T plug gold connector
Female
Male
G 3.5
Order no.
HCAQ7101
TRAXXAS* gold connector
Female
G 3.5
Description
Banana gold connectors 4 mm, Black + Red (1 set)
Female
Gold connectors with plastic housing
G 4.0
Order no.
HCAQ7129
Female
G 8.0
Order no.
HCAQ7001
G 2.0
G 3.5
G 4.0
Order no.
HCAQ7051
Banana gold connectors
G 4.0 Car
G 2.0
Female
XT-60 3,5mm gold connectors
G 2.0
3 pins gold connectors with plasic housing,
pre-wired
Female
Male
Male
HCAQ7102
Description
AMP connector with gold plated pins, Male + Female
(2 pairs)
AMP connector with gold plated pins, Male (4 pcs)
HCAQ7103
AMP connector with gold plated pins, Female (4 pcs)
Description
2.0 mm gold connector with plastic housing (4 pcs)
HCAQ7012
3.5 mm gold connector with plastic housing (4 pcs)
HCAQ7013
4.0 mm gold connector with plastic housing (4 pcs)
HCAQ7021
3.5 mm gold connector (3pins), Male + Female (1set)
Female
G 3.5
Male
Order no.
HCAQ7157
Description
T plug connector, Male, silicon wire 14 AWG, 10 cm (1 pc)
HCAQ7158
T plug connector, Female, silicon wire 14 AWG, 10 cm (1 pc)
MPX gold connector, pre-wired
G 3.5
Female
Order no.
HCAQ7061
Description
Traxxas gold connector, Male + Female (2 pairs)
HCAQ7062
Traxxas gold connector, Male (4 pcs)
HCAQ7063
Traxxas gold connector, Female (4 pcs)
* eingetragene Marke von TRAXXAS
G 4.0
HCAQ7111
HCAQ7112
HCAQ7133
HCAQ7113
Male
HCAQ7114
HCAQ7142
HCAQ7143
Description
Mini T plug gold connector, Male + Female (2 pairs)
HCAQ7072
Description
TAM/Std. connector with gold plated pins, Male + Female
(2 pairs)
TAM/Standard connector with gold plated pins, Male (4 pcs)
HCAQ7073
TAM/Standard connector with gold plated pins, Female (4 pcs)
Order no.
HCAQ7111
Description
Alligator clip small, Red & Black (1 set)
HCAQ7144
HCAQ7112
Aligator clip medium, Red & Black (1 set)
HCAQ7145
HCAQ7113
Alligator Battery clamps small, Red & Black (1 set)
HCAQ7114
Alligator Battery clamps large, Red & Black (1 set)
HCAQ7147
HCAQ7148
Male
G 4.0
Female
Order no.
HCAQ7132
TAM/Standard connector with gold plated Pins
Female
Order no.
HCAQ7041
G 3.5
Alligator clip
G 3.5
Order no.
HCAQ7011
Male
Male
Order no.
HCAQ7071
38
Gold connector, pre-wired
Male
Description
2.0 mm gold connector, Male, silicon wire 20 AWG, 10 cm
(1 pc)
2.0 mm gold connector, Female, silicon wire 20 AWG, 10 cm
(1 pc)
3.5 mm gold connector, Male, silicon wire 14 AWG, 10 cm
(1 pc)
3.5 mm gold connector, Female, silicon wire 14 AWG, 10 cm
(1 pc)
3.5 mm gold connector, Male, silicon wire 14 AWG, 10 cm
(1 pc), Flyzone, Graupner, Robbe
3.5 mm gold connector, Female, silicon wire 14 AWG, 10 cm
(1 pc), Flyzone, Graupner, Robbe
4.0 mm gold connector, Male, silicon wire 14 AWG, 10 cm
(1 pc)
4.0 mm gold connector, Female, silicon wire 14 AWG, 10 cm
(1 pc)
Order no.
HCAQ7162
Description
MPX gold connector, Male, silicon wire 14 AWG, 10 cm (1 pc)
HCAQ7163
MPX gold connector, Female, silicon wire 14 AWG, 10 cm (1 pc)
Mini TAM/Standard connector, pre-wired
Order no.
HCAQ7167
Description
Mini TAM/Stand. connector, Male, silicon wire 14 AWG, 10 cm (1 pc)
HCAQ7168
Mini TAM/Stand. connector, Female, silicon wire 14 AWG, 10 cm (1 pc)
39
Leads + Connectors
Switch harness BEC
Remote glow starter
Servo extension „HD Silicon twisted“ FUTABA
22 AWG
Servo lead „twisted“ Futaba
Servo extension JR/HITEC 22 AWG
Silikon verdrillt
Order no.
HCAQ7381
Description
Switch harness BEC
TAM/Standard connector, pre-wired
Order no.
HCAQ7191
Description
Glow starter extension (1 pc)
HCAQ7192
Glow plug connector (1 pc)
Switch harness Universal Futaba - JR
Order no.
HCAQ7330
HCAQ7331
HCAQ7332
HCAQ7333
HCAQ7334
HCAQ7335
Order no.
HCAQ7172
Description
TAM/Stand. connector, Male, silicon wire 14 AWG, 10 cm (1 pc)
HCAQ7173
TAM/Std. connector, Female, silicon wire 14 AWG, 10 cm (1 pc)
Order no.
HCAQ7391
Description
Switch harness Universal Futaba - JR
Description
10 cm extension wire "HD silicon twisted" Futaba, 22 AWG,
(1 pc)
20 cm extension wire "HD silicon twisted" Futaba, 22 AWG,
(1 pc)
30 cm extension wire "HD silicon twisted" Futaba, 22 AWG,
(1 pc)
50 cm extension wire "HD silicon twisted" Futaba, 22 AWG,
(1 pc)
75 cm extension wire "HD silicon twisted" Futaba, 22 AWG,
(1 pc)
100 cm extension wire "HD silicon twisted" Futaba, 22 AWG,
(1 pc)
Order no.
HCAQ7261
Description
30 cm Servo lead "twisted" Futaba, Male, 22 AWG, (1 pc)
HCAQ7262
30 cm Servo lead "twisted" Futaba, Female, 22 AWG,
(1 pc)
Y-lead Futaba 22AWG
Servo extension FUTABA 22 AWG
Order no.
HCAQ7891
Description
15 cm extension wire Futaba, 22 AWG, (1 pc)
HCAQ7211
30 cm extension wire Futaba, 22 AWG, (1 pc)
Order no.
HCAQ7177
Description
AMP connector, Male, silicon wire 16 AWG, 10 cm (1 pc)
HCAQ7212
45 cm extension wire Futaba, 22 AWG, (1 pc)
HCAQ7178
AMP connector, Female, silicon wire 16 AWG, 10 cm (1 pc)
HCAQ7213
60 cm extension wire Futaba, 22 AWG, (1 pc)
HCAQ7214
90 cm extension wire Futaba, 22 AWG, (1 pc)
Description
15 cm extension wire JR/Hitec, 22 AWG, (1 pc)
HCAQ7241
30 cm extension wire JR/Hitec, 22 AWG, (1 pc)
HCAQ7242
45 cm extension wire JR/Hitec, 22 AWG, (1 pc)
HCAQ7243
60 cm extension wire JR/Hitec, 22 AWG, (1 pc)
HCAQ7244
90 cm extension wire JR/Hitec, 22 AWG, (1 pc)
Order no.
HCAQ7220
Description
Y-lead Futaba, 22 AWG, 15 cm (1 pc)
HCAQ7221
Y-lead Futaba, 22 AWG, 30 cm (1 pc)
Description
Servo connector safety clip (5 pcs)
Order no.
HCAQ7201
Description
Servo lead Futaba, Male, 22 AWG, 30 cm (1 pc)
HCAQ7202
Servo lead Futaba, Female, 22 AWG, 30 cm (1 pc)
Order no.
HCAQ7310
Description
15 cm extension wire "twisted" JR/Hitec, 22 AWG, (1 pc)
HCAQ7311
30 cm extension wire "twisted" JR/Hitec, 22 AWG, (1 pc)
HCAQ7312
45 cm extension wire "twisted" JR/Hitec, 22 AWG, (1 pc)
HCAQ7313
60 cm extension wire "twisted" JR/Hitec, 22 AWG, (1 pc)
HCAQ7314
90 cm extension wire "twisted" JR/Hitec, 22 AWG, (1 pc)
Order no.
HCAQ7280
Description
15 cm Y-lead "twisted" Futaba, 22 AWG, (1 pc)
HCAQ7281
30 cm Y-lead "twisted" Futaba, 22 AWG, (1 pc)
Y-lead „HD silicon twisted“ Futaba 22 AWG
silicon twisted
Order no.
HCAQ7360
HCAQ7361
HCAQ7362
Order no.
HCAQ7182
Description
BEC connector, Male, silicon wire 20 AWG, 10 cm (1 pc)
HCAQ7183
BEC connector, Female, silicon wire 20 AWG, 10 cm (1 pc)
Description
15 cm extension wire "twisted" Futaba, 22 AWG, (1 pc)
HCAQ7271
30 cm extension wire "twisted" Futaba, 22 AWG, (1 pc)
HCAQ7272
45 cm extension wire "twisted" Futaba, 22 AWG, (1 pc)
HCAQ7273
HCAQ7274
Description
Servo wire "twisted", 22 AWG (2m)
HCAQ7792
Servo wire "Flat", 22 AWG (2m)
Servo lead JR/Hitec
Order no.
HCAQ7231
Description
Servo lead JR/Hitec, Male, 22 AWG, 30 cm (1 pc)
HCAQ7232
Servo lead JR/Hitec, Female, 22 AWG, 30 cm (1 pc)
Servo lead „twisted“ JR/Hitec
Servo extension „HD Silikon twisted“ JR/HITEC
22 AWG
Servo lead FUTABA 22 AWG
Servo extension „twisted“ FUTABA 22AWG
Order no.
HCAQ7270
Order no.
HCAQ7791
Servo extension „twisted“ JR/HITEC 22 AWG
Y-lead „twisted“ Futaba 22 AWG
Order no.
HCAQ7210
Order no.
HCAQ7240
Servo connector safety clip
AMP connector, pre-wired
BEC connector, pre-wired
40
Superflex servo wire (2m)
silicon twisted
HCAQ7363
HCAQ7364
60 cm extension wire "twisted" Futaba, 22 AWG, (1 pc)
Order no.
HCAQ7340
Description
15 cm Y-lead "HD silicon twisted" Futaba, 22 AWG, (1 pc)
90 cm extension wire "twisted" Futaba, 22 AWG, (1 pc)
HCAQ7341
30 cm Y-lead "HD silicon twisted" Futaba, 22 AWG, (1 pc)
HCAQ7365
Description
10 cm extension wire "HD silicon twisted" JR/Hitec, 22 AWG,
(1 pc)
20 cm extension wire "HD silicon twisted" JR/Hitec, 22 AWG,
(1 pc)
30 cm extension wire "HD silicon twisted" JR/Hitec, 22 AWG,
(1 pc)
50 cm extension wire "HD silicon twisted" JR/Hitec, 22 AWG,
(1 pc)
75 cm extension wire "HD silicon twisted" JR/Hitec, 22 AWG,
(1 pc)
100 cm extension wire "HD silicon twisted" JR/Hitec, 22 AWG,
(1 pc)
Order no.
HCAQ7301
Description
30 cm Servo lead "twisted" JR/Hitec, Male, 22 AWG, (1 pc)
HCAQ7302
30 cm Servo lead "twisted" JR/Hitec, Female, 22 AWG,
(1 pc)
Y-lead JR/Hitec 22 AWG
Order no.
HCAQ7250
Description
Y-lead JR/Hitec, 22 AWG, 15 cm (1 pc)
HCAQ7251
Y-lead JR/Hitec, 22 AWG, 30 cm (1 pc)
41
Leads + Connectors
Y-lead „twisted“ JR/Hitec 22 AWG
Charge lead
HCAQ7430
Order no.
HCAQ7320
Description
15 cm Y-lead "twisted" JR/Hitec, 22 AWG, (1 pc)
HCAQ7321
30 cm Y-lead "twisted" JR/Hitec, 22 AWG, (1 pc)
HCAQ7440
HCAQ7510
Combo charge lead BEC + Futaba RX +
TAM/Standard Male + T plug Males + Free wire
Order no.
HCAQ7540
HCAQ7441
HCAQ7450
HCAQ7516
HCAQ7371
30 cm Y-lead "HD silicon twisted" JR/Hitec, 22 AWG, (1 pc)
Combo charge lead TAM/Standard Male +
MPX Female + T plug Male + Free wire
HCAQ7460
HCAQ7470
HCAQ7490
HCAQ7411
HCAQ7491
HCAQ7420
HCAQ7480
HCAQ7402
HCAQ7481
HCAQ7410
HCAQ7421
HCAQ7530
Order no.
HCAQ7555
10 AWG = 5.5 mm
12 AWG = 3.3 mm
14 AWG = 2.2 mm
16 AWG = 1.3 mm
HCAQ7500
18 AWG = 0.9 mm
20 AWG = 0.6 mm
22 AWG = 0.35 mm
Description
Combo charge lead TAM/Standard Male + TAM/Standard Female +
AMP Female (1 pc)
HCAQ7535
Order no.
HCAQ7401
Description
Charge lead BEC RX (1 pc)
HCAQ7402
Charge lead BEC, silicon wire 20 AWG (1 pc)
HCAQ7410
Charge lead Futaba RX (1 pc)
HCAQ7411
Charge lead Futaba/HITEC TX (1 pc)
HCAQ7420
Charge lead JR RX (1 pc)
HCAQ7421
Charge lead JR TX (1 pc)
HCAQ7430
Charge lead for glowstarter
HCAQ7440
Charge lead TAM/Standard, silicon wire 16 AWG (1 pc)
HCAQ7441
Charge lead serial TAM/Standard, silicon wire 14 AWG (1 pc)
HCAQ7450
Charge lead Mini T plug, silicon wire 20 AWG (1 pc)
HCAQ7460
Charge lead MPX gold connector, silicon wire 16 AWG (1 pc)
HCAQ7470
Charge lead T plug, silicon wire 16 AWG (1 pc)
HCAQ7471
Charge lead serial T plug, silicon wire 14 AWG (1 pc)
HCAQ7480
Charge lead Traxxas, silicon wire 16 AWG (1 pc)
HCAQ7481
Charge lead serial Traxxas, silicon wire 14 AWG (1 pc)
HCAQ7490
Charge lead XT60, silicon wire 14 AWG (1 pc)
HCAQ7491
Charge lead serial XT60, silicon wire 14 AWG (1 pc)
HCAQ7500
Charge lead E-flite EC3, silicon wire 16 AWG (1 pc)
HCAQ7510
Charge lead 2.0 mm gold connector, silicon wire 20 AWG (1 pc)
HCAQ7515
Charge lead 3.5 mm gold connector, silicon wire 16 AWG (1 pc)
HCAQ7516
HCAQ7520
Charge lead 3.5 mm gold connector, silicon wire 16 AWG (1 pc),
Flyzone, Graupner, Robbe
Charge lead 4.0 mm gold connector, silicon wire 14 AWG (1 pc)
HCAQ7530
Charge lead Croco clips, silicon wire 16 AWG (1 pair)
HCAQ7535
Charge lead SLA, silicon wire 18 AWG (1 pair)
HCAQ7631
Conversion lead 2mm gold connector > …
Order no.
HCAQ7640
HCAQ7572
Order no.
HCAQ7545
Description
Combo charge lead TAM/Standard Male + MPX Female + T plug
Male + Free wire, silicon wire 16 AWG (1 pc)
Description
Conversion lead E-Flite Male > T plug Male, silicon wire 14 AWG
(1 pc)
Conversion lead E-Flite Male > 4 mm gold connector, silicon wire
14 AWG (1 pc)
Conversion lead BEC connector > …
Order no.
HCAQ7571
Charge lead
HCAQ7401
Description
Combo charge lead BEC + Futaba RX + TAM/Standard Male +
T plug Males + Free wire, silicon wire 18 AWG
HCAQ7520
silicon twisted
Description
15 cm Y-lead "HD silicon twisted" JR/Hitec, 22 AWG, (1 pc)
Conversion lead EC3 connector > …
HCAQ7515
Y-lead „HD silicon twisted“ JR/Hitec 22AWG
Order no.
HCAQ7370
Combo charge lead TAM/Standard Male +
TAM/Standard Female + AMP Female
Order no.
HCAQ7630
HCAQ7471
42
Charge lead
Description
Conversion lead BEC Male > TAM/Standard Female, silicon wire
20 AWG (1 pc)
Conversion lead BEC Male > JR/HITEC Male, silicon wire 20 AWG
(1 pc)
Description
Conversion 2 mm gold connector > T plug male, silicon wire
20 AWG (1 pc)
Conversion lead 4mm gold connector > …
Conversion lead MPX connector > …
Combo charge lead JR TX + Futaba/Hitec TX +
Futaba RX + TAM/Standard Male + T plug Male
Order no.
HCAQ7650
Order no.
HCAQ7590
HCAQ7591
Order no.
HCAQ7550
Description
Combo charge lead JR TX + Futaba/Hitec TX + Futaba RX +
TAM/Standard Male + T plug Male (1 pc)
Description
Conversion lead MPX Male > T plug Female, silicon wire 14 AWG
(1 pc)
Conversion lead MPX Female > T plug Male, silicon wire 14 AWG
(1 pc)
Description
Conversion 4 mm gold connector > T plug male, silicon wire
14 AWG (1 pc)
Conversion lead TRAXXAS connector > …
HCAQ7610
Order no.
HCAQ7610
HCAQ7611
HCAQ7612
HCAQ7611
HCAQ7612
Description
Conversion lead Traxxas Female > TAM/Standard Female, silicon
wire 14 AWG (1 pc)
Conversion lead Traxxas Female > T plug Male, silicon wire
14 AWG (1 pc)
Conversion lead Traxxas Male > T plug Female, silicon wire
14 AWG (1 pc)
43
Leads + Connectors
Conversion lead TAMIYA connector > …
HCAQ7580
Order no.
HCAQ7580
HCAQ7581
HCAQ7582
HCAQ7581
HCAQ7582
Conversion lead T plug connector > …
HCAQ7600
HCAQ7602
HCAQ7604
Order no.
HCAQ7651
HCAQ7700
HCAQ7705
HCAQ7701
HCAQ7706
HCAQ7710
HCAQ7715
HCAQ7711
HCAQ7716
HCAQ7603
HCAQ7605
Description
Converter 3.5 mm gold to 4.0 mm gold connector (1pair)
High Power extension lead
HCAQ7730
HCAQ7721
HCAQ7731
HCAQ7672
EHR
XH
HCAQ7675
HCAQ7680
PQ = polyquest
TP = BIONIC / FlightPower
Description
Extension lead BEC RX (1 pc)
HCAQ7672
Extension lead BEC, silicon wire 20 AWG (1 pc)
HCAQ7675
Extension lead TAM/Standard, silicon wire 14 AWG, 12 cm
(1 pc)
Extension lead MPX, silicon wire 14 AWG, 12 cm (1 pc)
Order no.
HCAQ7600
HCAQ7601
HCAQ7602
HCAQ7603
HCAQ7604
HCAQ7605
HCAQ7606
HCAQ7607
Description
Conversion lead T plug Female > 4 mm gold connector, silicon
wire 14 AWG (1 pc)
Conversion lead T plugs Female > 2 mm gold connector, silicon
wire 20 AWG (1 pc)
Conversion lead T plug Female > 3.5 mm gold connector, silicon
wire 14 AWG (1 pc)
Conversion lead T plug Female > TAM/Standard Female, silicon
wire 14 AWG (1 pc)
Conversion lead T plug Female > Traxxas Female, silicon wire
14 AWG (1 pc)
Conversion lead T plug Female > E-Flite Male, silicon wire
14 AWG (1 pc)
Conversion lead T plug Female > T plug Male, silicon wire
14 AWG
Conversion lead T plugs Female > BEC Male, silicon wire 20 AWG
(1 pc)
HCAQ7685
HCAQ7735
HCAQ7737
HCAQ7736
HCAQ7738
HCAQ7695
Order no.
HCAQ7671
HCAQ7680
HCAQ7607
Balancer board with XH wire
HCAQ7671
HCAQ7685
HCAQ7720
HCAQ7606
HCAQ7690
HCAQ7695
Extension lead T plug, silicon wire 14 AWG, 12 cm
(1 pc)
Extension lead XT60, silicon wire 14 AWG, 12 cm (1 pc)
Order no.
HCAQ7801
Description
Balancer board XH + Balancer board lead XH (1set)
HCAQ7802
Balancer board EH + Balancer board lead XH (1set)
HCAQ7803
Balancer board PQ + Balancer board lead XH (1set)
HCAQ7804
Balancer board TP + Balancer board lead XH (1set)
Balancer board with EHR wire
(Robbe and Graupner charger)
EHR
XH
PQ = polyquest
TP = BIONIC / FlightPower
Extension lead E-flite, silicon wire 14 AWG, 12 cm
(1 pc)
Gold plated battery bars
HCAQ7740
HCAQ7741
Order no.
HCAQ7700
Description
Y-lead Serial TAM/Standard, silicon wire 14 AWG (1 pc)
Order no.
HCAQ7701
Description
Y-lead Parallel TAM/Standard, silicon wire 14 AWG (1 pc)
HCAQ7705
Y-lead Serial MPX, silicon wire 14 AWG (1 pc)
HCAQ7706
Y-lead Parallel MPX, silicon wire 14 AWG (1 pc)
Order no.
HCAQ7811
Description
Balancer board XH + Balancer board lead EHR (1set)
HCAQ7710
Y-lead Serial T plug, silicon wire 14 AWG (1 pc)
HCAQ7711
Y-lead Parallel T plug, silicon wire 14 AWG (1 pc)
HCAQ7812
Balancer board EH + Balancer board lead EHR (1set)
HCAQ7715
Y-lead Serial Traxxas, silicon wire 14 AWG (1 pc)
HCAQ7716
Y-lead Parallel Traxxas, silicon wire 14 AWG (1 pc)
HCAQ7813
Balancer board PQ + Balancer board lead EHR (1set)
HCAQ7720
Y-lead Serial E-Flite, silicon wire 14 AWG (1 pc)
HCAQ7721
Y-lead Parallel E-Flite, silicon wire 14 AWG (1 pc)
HCAQ7814
Balancer board TP + Balancer board lead EHR (1set)
HCAQ7730
Y-lead Serial 2 mm gold connector, silicon wire 20 AWG (1 pc)
HCAQ7731
HCAQ7735
Y-lead Serial 3.5 mm gold connector, silicon wire 14 AWG
(1 pc)
Y-lead Serial 3.5 mm gold connector, silicon wire 14 AWG (1 pc),
Flyzone, Graupner, Robbe
Y-lead Serial 4.0 mm gold connector, silicon wire 14 AWG
(1 pc)
Y-lead Parallel 2 mm gold connector, silicon wire 20 AWG
(1 pc)
Y-lead Parallel 3.5 mm gold connector, silicon wire 14 AWG
(1 pc)
Y-lead Parallel 3.5 mm gold connector, silicon wire 14 AWG
(1 pc), Flyzone, Graupner, Robbe
Y-lead Parallel 4.0 mm gold connector, silicon wire 14 AWG
(1 pc)
HCAQ7737
HCAQ7740
44
Y-lead Parallel
(double the capacity, same voltage)
HCAQ7601
Description
Conversion lead TAM/Standard Female > Traxxas Female, silicon
wire 14 AWG (1 pc)
Conversion lead TAM/Standard Female > T plug Female, silicon
wire 14 AWG (1 pc)
Conversion lead TAM/Standard Male > T plug Male, silicon wire
14 AWG (1 pc)
Converter 3.5mm gold to 4.0mm gold connector
Y-lead Serial
(double the voltage, same capacity)
HCAQ7736
HCAQ7738
HCAQ7741
Order no.
HCAQ7761
Description
Gold plated battery bars 18.5 mm (10 pcs)
HCAQ7762
Gold plated battery bars 22 mm (10 pcs)
45
Power Flow propellers were developed for electric10 AWG = 5.5 mm2
12 AWG = 3.3 mm2
14 AWG = 2.2 mm2
16 AWG = 1.3 mm2
Order no.
HCAQ7781
HCAQ7782
HCAQ7783
HCAQ7784
HCAQ7785
HCAQ7786
HCAQ7787
18 AWG = 0.9 mm2
20 AWG = 0.6 mm2
22 AWG = 0.35 mm2
Description
Superflex silicon wire 5,5 mm² 10 AWG, 1940 strands
(1 m Red & 1 m Black)
Superflex silicon wire 3,3 mm² 12 AWG, 1050 strands
(1 m Red & 1 m Black)
Superflex silicon wire 2,2 mm² 14 AWG, 700 strands
(1 m Red & 1 m Black)
Superflex silicon wire 1,3 mm² 16 AWG, 490 strands
(1 m Red & 1 m Black)
Superflex silicon wire 0,9 mm² 18 AWG, 300 strands
(1 m Red & 1 m Black)
Superflex silicon wire 0,6 mm² 20 AWG, 196 strands
(1 m Red & 1 m Black)
Superflex silicon wire 0,35 mm² 22 AWG, 120 strands
(1 m Red & 1 m Black)
Aircraft accessories
Leads + Connectors
Superflex silicon wire
Order no. GPMG1250
Order no. GPMG1255
Order no. GPMG1260
Order no. GPMG1265
powered flight, and require less motor power
than other propellers - meaning longer
flight duration and more fun!
Propeller
f langes
Brushless Motor Mount
Order no.
Motor Mount
Size
Weight
Replacement for
GPM Motor Mount
Replaces original
motor size
Fits motor
RimFire
Ammo
GPMG1250
small
35 g
none
none
28 mm
GPMG1255
medium
81 g
GPMG1041 & GPMG1061
GP 20 - 48 & GP 40 - 70
35 mm
28 mm
GPMG1260
large
140 g
GPMG1091
GP 60 - 120
50 mm
36 mm
GPMG1265
X-large
145 g
GPMG1101
GP 120 - 180
63 mm
–
24 mm
- Specifically formed blades
to optimise performance.
- Winglets reduce drag
during flight.
- Sold in pairs, except for
GPMQ6801 (1 per pack).
Order no. GPMG1270
Best.-Nr.: GPMQ4945
Best.-Nr.: GPMQ4953
Best.-Nr.: GPMQ4994
Order no. GPMG1275
Propeller flanges
Brushless Motor Mount
Order no. GPMG1270
X-Large Spacers:
- 4 x 50 mm Aluminium Spacer
- 4 x 20 mm Aluminium Spacer
- 4 x 10 mm Aluminium Spacer
- 4 x 5 mm Aluminium Spacer
- 4 x 2,5 mm Aluminium Spacer
- 4 x 10 mm Mount Base
- 4 x 76 mm Socket Head Cap Screw
- 4 x 51 mm Socket Head Cap Screw
- 4 x 38 mm Socket Head Cap Screw
- 4 x 8-32 Blind Nut
- 4 x #8 Flat Washer
- 4 x #8 Lock Washer
- Instructions with Template
46
Order no. GPMG1275
XX-Large Spacers:
- 4 x 50 mm Aluminium Spacer
- 4 x 20 mm Aluminium Spacer
- 4 x 10 mm Aluminium Spacer
- 4 x 2,5 mm Aluminium-Abstandhalter
- 4 x 10 mm Mount Base
- 4 x 127 mm Socket Head Cap Screw
- 4 x 102 mm Socket Head Cap Screw
- 4 x 95 mm Socket Head Cap Screw
- 4 x 51 mm Socket Head Cap Screw
- 4 x 1/4-20 Blind Nut
- 4 x 6,4 mm Flat Washer
- 4 x 6,4 mm Lock Washer
- Instructions with Template
Propellers & Adapters
Order no.
Description
GPMQ6610
Power Flow Slo-Flyer elektric propeller 8 x 6 in (2 pcs)
GPMQ6630
Power Flow Slo-Flyer elektric propeller 9 x 4,5 in (2 pcs)
GPMQ6640
Power Flow Slo-Flyer elektric propeller 9 x 6 in (2 pcs)
GPMQ6655
Power Flow Slo-Flyer elektric propeller 10 x 3,5 in (2 pcs)
GPMQ6660
Power Flow Slo-Flyer elektric propeller 10 x 4,5 in (2 pcs)
GPMQ6675
Power Flow Slo-Flyer elektric propeller 10 x 7 in (2 pcs)
GPMQ6695
Power Flow Slo-Flyer elektric propeller 11 x 4,5 in (2 pcs)
GPMQ6801
Power Flow elektric propeller 11 x 8,5 E
Motor Shaft Ø
Flange thread
Propeller flange
with set screws
Propeller flange
with conical clamp
Conical clamp
and Spinner Nut
1,5 mm
3 mm
Not available
GPMQ4950
GPMQ4982
2,0 mm
5 mm
Not available
GPMQ4953
GPMQ4984
2,3 mm
5 mm
Not available
GPMQ4956
GPMQ4986
3,0 mm
5 mm
GPMQ4930
GPMQ4959
GPMQ4988
3,175 mm
5 mm
GPMQ4933
GPMQ4962
GPMQ4990
4,0 mm
1/4 x 28
GPMQ4936
GPMQ4965
GPMQ4992
5,0 mm
5/16 x 24
GPMQ4939
GPMQ4966
GPMQ4994
6,0 mm
5/16 x 24
GPMQ4942
GPMQ4968
GPMQ4996
8,0 mm
3/8 x 24
GPMQ4945
GPMQ4971
GPMQ4998
47
Order no.
Description
Size
APC Airscrews
5 inch diameter
APC airscrews have a profile specially developed for model aircraft
flight, making them extremely efficient. This development has been
made possible by the most up-to-date computer software available.
In order to guarantee a sustainable high quality, APC airscrews are
produced in metal moulds constructed with modern precision CNC
technology. Extremely fine, but durable, airscrews are produced
using the special fibreglass-reinforced plastic developed by APC.
Purpose-designed blister packing ensures that these hi-tec airscrews
arrive at their designation without being damaged in transit, giving
you an optimal airscrew for your model.
With our extensive range of APC airscrews, you can get the best
possible performance from your model.
Generally speaking, strong thrust is generated by low pitch with
large propeller diameter, whilst high speed results from high pitch
with smaller propeller diameter. For propeller choice, always consult
the information provided by the manufacturer of your motor.
2-blade airscrews for electric motors
Order no.
Description
Size
4 inch diameter
Description
Size
15 inch diameter
Order no.
Size
Order no.
Description
Size
Wide Blade (anticlockwise rotation)
Speed 400 Electric
5x5
HCAQ9047
Thin Electric
15 x 10
HCAQ9085
APC Thin Electric Wide Blade
17 x 10
Speed 400 Electric
5,1 x 4,5
HCAQ9048
Thin Electric
15 x 4
HCAQ9084
APC Thin Electric Wide Blade
18 x 12
HCAQ9010
Speed 400 Electric
5,25 x 4,75
HCAQ9049
Thin Electric
15 x 6
HCAQ9086
Thin Electric Wide Blade
19 x 12
HCAQ9011
Speed 400 Electric
5,25 x 6,25
HCAQ9050
Thin Electric
15 x 7
HCAQ9087
Thin Electric Wide Blade
20 x 12
HCAQ9012
Speed 400 Electric
5,5 x 4,5
HCAQ9051
Thin Electric
15 x 8
HCAQ9088
Thin Electric Wide Blade
20,5 x 12
HCAQ9089
Thin Electric Wide Blade
21 x 12
HCAQ9118
Thin Electric Pusher
13 x 4,5
HCAQ9119
Thin Electric Pusher
HCAQ9120
Thin Electric Pusher
6 inch diameter
16 inch diameter
HCAQ9013
Speed 400 Electric
6x4
HCAQ9052
Thin Electric
16 x 10
HCAQ9090
Thin Electric Wide Blade
21 x 13
HCAQ9014
Thin Electric
6 x 5,5
HCAQ9053
Thin Electric
16 x 12
HCAQ9091
Thin Electric Wide Blade
22 x 12
HCAQ9054
Thin Electric
16 x 4
HCAQ9055
Thin Electric
16 x 8
7 inch diameter
HCAQ9015
Thin Electric
7x4
HCAQ9016
Thin Electric
7x5
HCAQ9017
Thin Electric
7x6
8 inch diameter
17 inch diameter
HCAQ9056
Thin Electric
17 x 10
HCAQ9057
Thin Electric
17 x 12
HCAQ9018
Thin Electric
8x4
HCAQ9058
Thin Electric
17 x 6
HCAQ9019
Thin Electric
8x6
HCAQ9059
Thin Electric
17 x 7
HCAQ9020
Thin Electric
8x8
HCAQ9060
Thin Electric
17 x 8
9 inch diameter
APC pusher airscrews for electric motors
(anticlockwise rotation)
18 inch diameter
HCAQ9021
Thin Electric
9 x 4,5
HCAQ9061
Thin Electric
18 x 10
HCAQ9022
Thin Electric
9x6
HCAQ9062
Thin Electric
18 x 12
HCAQ9023
Thin Electric
9 x 7,5
HCAQ9063
Thin Electric
18 x 8
HCAQ9024
Thin Electric
9x9
10 inch diameter
19 inch diameter
HCAQ9064
Thin Electric
19 x 10
HCAQ9025
Thin Electric
10 x 10
HCAQ9065
Thin Electric
19 x 12
HCAQ9026
Thin Electric
10 x 5
HCAQ9066
Thin Electric
19 x 8
HCAQ9027
Thin Electric
10 x 6
HCAQ9028
Thin Electric
10 x 7
HCAQ9067
Thin Electric
20 x 10
HCAQ9029
Thin Electric
10 x 8
HCAQ9068
Thin Electric
20 x 11
HCAQ9069
Thin Electric
20 x 13
20 inch diameter
HCAQ9030
Thin Electric
11 x 10
HCAQ9070
Thin Electric
20 x 5
HCAQ9031
Thin Electric
11 x 5,5
HCAQ9071
Thin Electric
20 x 8
HCAQ9032
Thin Electric
11 x 7
HCAQ9072
Thin Electric
20,5 x 14
HCAQ9033
Thin Electric
11 x 8
HCAQ9073
Thin Electric
20,5 x 20,5
HCAQ9034
Thin Electric
11 x 8,5
12 inch diameter
21 inch diameter
HCAQ9074
Thin Electric
21 x 13
HCAQ9075
Thin Electric
21 x 13,5
HCAQ9035
Thin Electric
12 x 10
HCAQ9036
Thin Electric
12 x 12
HCAQ9037
Thin Electric
12 x 6
HCAQ9076
Thin Electric
22 x 10
HCAQ9038
Thin Electric
12 x 8
HCAQ9077
Thin Electric
22 x 11
HCAQ9078
Thin Electric
22 x 12
13 inch diameter
22 inch diameter
24 inch diameter
HCAQ9039
Thin Electric
13 x 10
HCAQ9000
Thin Electric
4,1 x 4,1
HCAQ9040
Thin Electric
13 x 4
HCAQ9001
Speed 400 Electric
4,5 x 4,1
HCAQ9041
Thin Electric
13 x 6,5
HCAQ9002
Speed 400 Electric
4,7 x 4,2
HCAQ9042
Thin Electric
13 x 8
HCAQ9003
Speed 400 Electric
4,75 x 4,5
HCAQ9004
Speed 400 Electric
4,75 x 4,5
HCAQ9043
Thin Electric
14 x10
HCAQ9081
Thin Electric
26 x 13
HCAQ9005
Speed 400 Electric
4,75 x 4,75
HCAQ9044
Thin Electric
14 x12
HCAQ9082
Thin Electric
26 x 15
HCAQ9006
Speed 400 Electric
4,75 x 4,75
HCAQ9045
Thin Electric
14 x7
HCAQ9007
Speed 400 Electric
4,75 x 5.5
HCAQ9046
Thin Electric
14 x8.5
14 inch diameter
HCAQ9079
Thin Electric
24 x 12
25 inch diameter
HCAQ9080
Thin Electric
25 x 12,5
25 inch diameter
27 inch diameter
HCAQ9083
Thin Electric
27 x 13
HCAQ9115
Order no.
Description
Size
12 x 6,5
Size
APC Slow Flyer
10 x 4,7
HCAQ9212
APC Slow Flyer
10 x 7
HCAQ9213
APC Slow Flyer
11 x 3,8
HCAQ9214
APC Slow Flyer
11 x 4,7
HCAQ9215
APC Slow Flyer
11 x 7
HCAQ9216
APC Slow Flyer
12 x 3,8
13 x 4,5
HCAQ9217
APC Slow Flyer
12 x 4,7
HCAQ9218
APC Slow Flyer
12 x 6
13 x 5,5
HCAQ9219
APC Slow Flyer
12 x 8
HCAQ9220
APC Slow Flyer
13 x 4,7
HCAQ9221
APC Slow Flyer
14 x 4,7
HCAQ9222
APC Slow Flyer Wide Blade
7 x 3,8
Thin Electric Pusher
12 x 8
HCAQ9117
Thin Electric Pusher
13 x 4
HCAQ9121
Thin Electric Pusher
13 x 6,5
HCAQ9122
Thin Electric Pusher
13 x 8
HCAQ9123
Thin Electric Pusher
14 x 8,5
HCAQ9124
Thin Electric Pusher
15 x 10
HCAQ9125
Thin Electric Pusher
15 x 4
HCAQ9126
Thin Electric Pusher
16 x 10
Thin Electric Pusher
Description
HCAQ9211
HCAQ9116
HCAQ9127
These airscrews have the same characteristics as the normal electric
airscrews, but are configured to run anticlockwise, making them ideal
for models employing a pusher drive system, or multi-engine models
with contra-rotating drives.
Thin Electric Pusher
Order no.
APC Slow Fly airscrews
HCAQ9009
16 x 4
HCAQ9128
Thin Electric Pusher
20 x 13
HCAQ9129
Thin Electric Pusher
20 x 22,5
APC Slow Fly pusher airscrews
HCAQ9250
APC Slow Flyer Pusher
7x4
HCAQ9251
APC Slow Flyer Pusher
8 x 3,8
HCAQ9252
APC Slow Flyer Pusher
8 x 4,7
HCAQ9253
APC Slow Flyer Pusher
9 x 4,7
HCAQ9254
APC Slow Flyer Pusher
10 x 3,8
HCAQ9255
APC Slow Flyer Pusher
10 x 4,7
HCAQ9256
APC Slow Flyer Pusher
11 x 4,7
HCAQ9257
APC Slow Flyer Pusher
11 x 7
HCAQ9258
APC Slow Flyer Pusher
12 x 3,8
HCAQ9259
APC Slow Flyer Pusher
12 x 4,7
HCAQ9260
APC Slow Flyer Pusher
13 x 4,7
HCAQ9261
APC Slow Flyer Pusher
14 x 4,7
APC Slow Fly airscrews
APC pusher airscrews for electric motors (anticlockwise rotation)
HCAQ9100
Speed 400 Electric Pusher
4,75 x 4,75
HCAQ9101
Speed 400 Electric Pusher
5,5 x 4,5
HCAQ9102
Speed 400 Electric Pusher
6x4
HCAQ9103
Thin Electric Pusher
4,1 x 4,1
HCAQ9104
Thin Electric Pusher
7x 5
HCAQ9105
Thin Electric Pusher
8x6
HCAQ9106
Thin Electric Pusher
9 x 4,5
HCAQ9107
Thin Electric Pusher
9x6
HCAQ9108
Thin Electric Pusher
10 x 5
HCAQ9109
Thin Electric Pusher
10 x 5,8
HCAQ9110
Thin Electric Pusher
11 x 4,5
APC airscrew adapter rings
Order no.
Order no.
HCAQ9848
Metric Slow Flyer Adapter Rings
99 x MetSFAdp
HCAQ9849
Slow Flyer Adapter Rings
99 x SFAdp
HCAQ9850
Thin Electric Adapter Rings
99 x EleAdp
Description
Size
APC Slow Fly airscrews
HCAQ9200
APC Slow Flyer
7x4
HCAQ9201
APC Slow Flyer
7x5
HCAQ9202
APC Slow Flyer
7x6
HCAQ9203
APC Slow Flyer
8 x 3,8
HCAQ9204
APC Slow Flyer
8 x 4,7
HCAQ9205
APC Slow Flyer
8x6
11 x 5,5
HCAQ9112
Thin Electric Pusher
11 x 8
HCAQ9206
APC Slow Flyer
9 x 3,8
HCAQ9207
APC Slow Flyer
9 x 4,7
HCAQ9113
Thin Electric Pusher
12 x 6
HCAQ9208
APC Slow Flyer
9x6
HCAQ9209
APC Slow Flyer
9 x 7,5
HCAQ9210
APC Slow Flyer
10 x 3.8
12 x 6
Size
APC Slow Fly airscrews are very light, and produce high thrust from
low revolutions.
Thin Electric Pusher
Thin Electric Pusher
Description
APC airscrew adapter rings
HCAQ9111
HCAQ9114
48
Description
Wide Blade
HCAQ9008
11 inch diameter
APC electric airscrews are specially developed for use with electric
motors. The overly-thin fibreglass-reinforced blades reach a very
high degree of efficiency.
Order no.
49
APC folding airscrews and hubs
Order no.
APC folding airscrews are distinguished by their high degree of
efficiency, enabling the pilot to extract maximum performance from
the electric motor.
Order no.
Description
Size
APC Airscrews
APC folding airscrews
HCAQ9150
Folding Electric Propeller Blades
5x5
HCAQ9151
Folding Electric Propeller Blades
6x3
HCAQ9152
Folding Electric Propeller Blades
7x4
HCAQ9153
Folding Electric Propeller Blades
8x4
HCAQ9154
Folding Electric Propeller Blades
9x5
HCAQ9155
Folding Electric Propeller Blades
10 x 6
HCAQ9156
Folding Electric Propeller Blades
11 x 8
HCAQ9157
Folding Electric Propeller Blades
12 x 8,5
HCAQ9158
Folding Electric Propeller Blades
13 x 10
HCAQ9159
Folding Electric Propeller Blades
13 x 7
HCAQ9160
Folding Electric Propeller Blades
14 x 10
HCAQ9161
Folding Electric Propeller Blades
15 x 12
Size
HCAQ9162
HCAQ9163
HCAQ9164
HCAQ9165
35mm Folding Electric Hub for 30mm
Spinner
45mm Folding Electric Hub for 40mm
Spinner
50mm Folding Electric Hub for 45mm
Spinner
55mm Folding Electric Hub for 50mm
Spinner
35 mm
45 mm
50 mm
55 mm
APC multicopter airscrews are especially lightweight, making them
ideal for controlling the flight behaviour of the multicopter. The
airscrew shape promotes stable flight and provides strong lift.
Order no.
Description
Size
APC multi-rotor
HCAQ9350
APC Multi-Rotor
8 x 4,5
HCAQ9351
APC Multi-Rotor
9 x 4,5
HCAQ9352
APC Multi-Rotor
10 x 4,5
APC multi-rotor
HCAQ9353
APC Multi-Rotor
10 x 5,5
HCAQ9354
APC Multi-Rotor
12 x 4,5
HCAQ9355
APC Multi-Rotor
14 x 5,5
HCAQ9356
APC Multi-Rotor
16 x 5,5
APC 2-blade airscrews for combustion motors
Order no.
Description
Size
7 inch diameter
Order no.
Description
Size
8 inch diameter
Order no.
Description
Size
11 inch diameter
HCAQ9357
APC Multi-Rotor Pusher
8 x 4,5
HCAQ9605
21-25 Free Flight
7,625 x 3,25
HCAQ9796
40 Pylon
8,8 x 9,5
HCAQ9613
60 Pattern
11 x 12
HCAQ9358
APC Multi-Rotor Pusher
9 x 4,5
HCAQ9603
21-25 Free Flight
7,8 x 4
HCAQ9797
40 Pylon
8,8 x 9,75
HCAQ9643
60 Pattern Wide Blade
11 x 12
HCAQ9359
APC Multi-Rotor Pusher
10 x 4,5
HCAQ9608
36 Combat
7,8 x 6
HCAQ9614
60 Pattern
11 x 13
HCAQ9360
APC Multi-Rotor Pusher
10 x 5,5
HCAQ9609
36 Combat
7,8 x 7
HCAQ9361
APC Multi-Rotor Pusher
12 x 4,5
HCAQ9362
APC Multi-Rotor Pusher
14 x 5,5
HCAQ9363
APC Multi-Rotor Pusher
16 x 5,5
APC multi-blade airscrews
APC multi-blade airscrews run very quietly, and are therefore ideal
for drives with low noise emission. Compared to a normal 2-blade
airscrew, the diameter of the multi-blade airscrew should be a little
smaller.
At low RPM (revolutions per minute) multi-blades create more drag
than 2-blades, a characteristic which aerobatic and tow pilots like to
utilise to aid braking when making steep descents.
APC folding electric hub
APC multicopter airscrews
50
Description
APC multi-rotor pusher
Order no.
Description
Size
APC multi-blade airscrews
8 inch diameter
APC combustion motor airscrews have been specially developed for
use with combustion motors with the support of experienced competition pilots.
Made from fibreglass-reinforced plastic, these airscrews have a very
economical blade profile, which maximises performance whilst
reducing noise development.
Order no.
Description
Size
4 inch diameter
HCAQ9509
020 Sport
4,2 x 2
HCAQ9510
049 Free Flight
4,2 x 4
HCAQ9511
049 Free Flight
4,4 x 4
HCAQ9518
1/2A Pylon / Combat
4,5 x 3,5
HCAQ9519
1/2A Pylon / Combat
4,5 x 4
HCAQ9520
1/2A Pylon / Combat
4,6 x 3
HCAQ9521
1/2A Pylon / Combat
4,75 x 4
HCAQ9300
APC 3 Blade Propeller
15 x 13,5-3
HCAQ9301
APC 3 Blade Propeller
15 x 13-3
HCAQ9512
049 Free Flight
5x3
HCAQ9302
APC 3 Blade Propeller
15,75 x 13-3
HCAQ9513
049 Free Flight
5,5 x 2
HCAQ9303
APC 4 Blade Propeller
9 x 6-4
HCAQ9514
049 Free Flight
5,5 x 2,5
HCAQ9304
HCAQ9305
APC 4 Blade Propeller
APC 4 Blade Propeller
10 x 6-4
11 x 6-4
HCAQ9515
049 Free Flight
5,7 x 3
HCAQ9306
APC 4 Blade Propeller
11 x 9-4
HCAQ9516
049 Free Flight
6x2
HCAQ9307
APC 4 Blade Propeller
14,5 x 12-4
HCAQ9517
049 Free Flight
6x3
HCAQ9308
APC 4 Blade Propeller
15,5 x 12-4
HCAQ9664
Sport
6x4
HCAQ9594
15 Combat
6,3 x 4
HCAQ9522
10 Free Flight
6,5 x 2,9
HCAQ9595
15 Combat
6,5 x 3,7
HCAQ9523
10-15 Pylon
6,5 x 5,0
HCAQ9524
10-15 Pylon
6,5 x 5,5
HCAQ9525
10-15 Pylon
6,5 x 6,0
HCAQ9526
10-15 Pylon
6,5 x 6,5
5 inch diameter
6 inch diameter
7 inch diameter
HCAQ9500
15 Free Flight
7x3
HCAQ9501
15 Free Flight
7x4
HCAQ9666
Sport
7x5
HCAQ9667
Sport
7x6
HCAQ9508
20 Racing Wide Blade
7x6
HCAQ9668
Sport
7x7
HCAQ9669
Sport
7x8
HCAQ9670
Sport
7x9
HCAQ9665
Sport
7 x 10
HCAQ9671
Sport
7,2 x 8,0
HCAQ9672
Sport
7,2 x 8,6
HCAQ9741
Sport
7,25 x 7
9 inch diameter
HCAQ9646
Combat
9x3
HCAQ9615
60 Pattern
11 x 14
HCAQ9648
Combat Narrow
9x3
HCAQ9650
Control Line
11,5 x 4
HCAQ9604
21-25 Free Flight
8 x 3,75
HCAQ9502
29 Free Flight
9x4
HCAQ9651
Control Line
11,5 x 6
HCAQ9507
21-25 Free Flight Wide Blade
8 x 3,75
HCAQ9503
29 Free Flight
9x5
HCAQ9616
60 Pattern
11,5 x 12,5
HCAQ9674
Sport
8x4
HCAQ9680
Sport
9x6
HCAQ9675
Sport
8x5
HCAQ9653
Control Line Narrow
9x6
HCAQ9701
Sport
12 x 4
HCAQ9649
Control Line
8x6
HCAQ9783
40 Pylon
9 x 6,5
HCAQ9702
Sport
12 x 5
HCAQ9676
Sport
8x7
HCAQ9681
Sport
9x7
HCAQ9703
Sport
12 x 6
HCAQ9798
Pylon
8 x 7,3
HCAQ9784
40 Pylon
9 x 7,5
HCAQ9704
Sport
12 x 7
HCAQ9677
Sport
8x8
HCAQ9682
Sport
9x8
HCAQ9705
Sport
12 x 8
HCAQ9678
Sport
8x9
HCAQ9785
40 Pylon
9 x 8,5
HCAQ9622
60 Pattern
12 x 9
HCAQ9673
25 Pylon
8 x 10
HCAQ9683
Sport
9x9
HCAQ9645
60 Pattern Wide Blade
12 x 9
HCAQ9607
25 Pylon
8,5 x 5,5
HCAQ9679
Sport
9 x 10
HCAQ9617
60 Pattern
12 x 10
HCAQ9755
40 Pylon
8,5 x 6,5
HCAQ9750
25 Pylon
9,25 x 5,0
HCAQ9644
60 Pattern Wide Blade
12 x 10
HCAQ9756
40 Pylon
8,5 x 7,0
HCAQ9751
25 Pylon
9,25 x 5,25
HCAQ9618
60 Pattern
12 x 11
HCAQ9757
40 Pylon
8,5 x 7,25
HCAQ9752
25 Pylon
9,25 x 5,5
HCAQ9639
60 Pattern Narrow
12 x 11
HCAQ9758
40 Pylon
8,5 x 7,5
HCAQ9753
25 Pylon
9,25 x 5,75
HCAQ9623
60 Pattern
12 x 11,5
HCAQ9759
40 Pylon
8,625 x 3,75
HCAQ9754
25 Pylon
9,25 x 6,0
HCAQ9619
60 Pattern
12 x 12
HCAQ9610
36 Fast Combat
8,75 x 5,0
HCAQ9647
Combat
9,3 x 3
HCAQ9640
60 Pattern Narrow
12 x 12
HCAQ9760
40 Pylon
8,75 x 7,5
HCAQ9505
40 Free Flight
9,5 x 4,5
HCAQ9624
60 Pattern
12 x 12,5
HCAQ9761
40 Pylon
8,75 x 7,0
HCAQ9684
Sport
9,5 x 6
HCAQ9620
60 Pattern
12 x 13
HCAQ9762
40 Pylon
8,75 x 7,0
HCAQ9786
40 Pylon
9,5 x 6,5
HCAQ9641
60 Pattern Narrow
12 x 13
HCAQ9763
40 Pylon
8,75 x 7,5
HCAQ9787
40 Pylon
9,5 x 7
HCAQ9621
60 Pattern
12 x 14
HCAQ9749
40 Pylon
8,75 x 7,5
HCAQ9788
40 Pylon
9,5 x 7,5
HCAQ9652
Control Line
12,25 x 3,75
HCAQ9764
40 Pylon
8,75 x 7,75
HCAQ9789
40 Pylon
9,5 x 8
HCAQ9706
Sport
12,5 x 6
HCAQ9765
40 Pylon
8,75 x 7,75
HCAQ9790
40 Pylon
9,5 x 8,5
HCAQ9631
60 Pattern
12,5 x 9
HCAQ9766
40 Pylon
8,75 x 7,75
HCAQ9504
29-36 Free Flight
9,625 x 3,75
HCAQ9625
60 Pattern
12,5 x 10
HCAQ9767
40 Pylon
8,75 x 8,0
HCAQ9626
60 Pattern
12,5 x 11
HCAQ9768
40 Pylon
8,75 x 8,0
HCAQ9686
Sport
10 x 3
HCAQ9627
60 Pattern
12,5 x 11,5
HCAQ9769
40 Pylon
8,75 x 8,0
HCAQ9687
Sport
10 x 4
HCAQ9628
60 Pattern
12,5 x 12
HCAQ9770
40 Pylon
8,75 x 8,25
HCAQ9688
Sport
10 x 5
HCAQ9629
60 Pattern
12,5 x 12,5
HCAQ9771
40 Pylon
8,75 x 8,25
HCAQ9689
Sport
10 x 6
HCAQ9630
60 Pattern
12,5 x 13
HCAQ9772
40 Pylon
8,75 x 8,25
HCAQ9690
Sport
10 x 7
HCAQ9773
40 Pylon
8,75 x 8,5
HCAQ9691
Sport
10 x 8
HCAQ9707
Sport
13 x 4
HCAQ9774
40 Pylon
8,75 x 8,5
HCAQ9692
Sport
10 x 9
HCAQ9743
3D Fun Fly Wide Blade
13 x 4
HCAQ9775
40 Pylon
8,75 x 8,5
HCAQ9685
Sport
10 x 10
HCAQ9708
Sport
13 x 6
HCAQ9776
40 Pylon
8,75 x 8,75
HCAQ9506
40 Free Flight
10,5 x 4,5
HCAQ9709
Sport
13 x 7
HCAQ9777
40 Pylon
8,75 x 8,75
HCAQ9693
Sport
10,5 x 6
HCAQ9710
Sport
13 x 8
HCAQ9778
40 Pylon
8,75 x 9,0
HCAQ9634
60 Pattern
13 x 9
HCAQ9779
40 Pylon
8,75 x 9,0
HCAQ9694
Sport
11 x 3
HCAQ9632
60 Pattern
13 x 10
HCAQ9780
40 Pylon
8,75 x 9,25
HCAQ9695
Sport
11 x 4
HCAQ9633
60 Pattern
13 x 11
HCAQ9781
40 Pylon
8,75 x 9,25
HCAQ9696
Sport
11 x 5
HCAQ9637
60 Pattern / 91 Warbird Narrow
13 x 13
HCAQ9782
40 Pylon
8,75 x 9,5
HCAQ9697
Sport
11 x 6
HCAQ9638
60 Pattern / 91 Warbird Narrow
13 x 13,5
HCAQ9791
40 Pylon
8,8 x 8,5
HCAQ9698
Sport
11 x 7
HCAQ9527
120 Pattern
13,5 x 12,5
HCAQ9792
40 Pylon
8,8 x 8,75
HCAQ9699
Sport
11 x 8
HCAQ9528
120 Pattern
13,5 x 13,3
HCAQ9793
40 Pylon
8,8 x 8,9
HCAQ9700
Sport
11 x 9
HCAQ9529
120 Pattern
13,5 x 14
HCAQ9794
40 Pylon
8,8 x 9,0
HCAQ9611
60 Pattern
11 x 10
HCAQ9562
120 Pattern Wide Blade
13,5 x 14
HCAQ9795
40 Pylon
8,8 x 9,25
HCAQ9612
60 Pattern
11 x 11
10 inch diameter
11 inch diameter
12 inch diameter
13 inch diameter
51
Order no.
Description
Size
Size
16 x 11
Order no.
Description
Size
20 inch diameter
HCAQ9547
120 Pattern
16 x 12
HCAQ9732
Sport
20 x 8
60 Pattern
13,5 x 9
HCAQ9548
120 Pattern
16 x 13
HCAQ9662
IMAC Aerobatic Wide Blade
20 x 8
HCAQ9635
60 Pattern
13,5 x 10
HCAQ9561
120 Pattern Narrow
16 x 13
HCAQ9727
Sport
20 x 10
HCAQ9642
60 Pattern Narrow
13,5 x 11,5
HCAQ9583
140 Pattern / Sport
16 x 14
HCAQ9598
170 Pattern
20 x 10
HCAQ9551
120 Pattern / Warbird
13,5 x 13,5
HCAQ9568
140 Pattern
16 x 15
HCAQ9661
IMAC Aerobatic Wide Blade
20 x 10
HCAQ9569
140 Pattern
16 x 16
HCAQ9740
Sport Narrow
20 x 10,5
14 inch diameter
APC Airscrews
Description
120 Pattern
HCAQ9636
13 inch diameter
HCAQ9742
3D Fun Fly
14 x 4
HCAQ9746
3D Fun Fly Wide Blade
16,5 x 5
HCAQ9728
Sport
20 x 12
HCAQ9738
Sport Narrow
14 x 5
HCAQ9589
140 Pattern Wide Blade
16,5 x 12
HCAQ9729
Sport
20 x 14
HCAQ9712
Sport
14 x 6
HCAQ9570
140 Pattern
16,5 x 13
HCAQ9657
Giant Scale WCAR T6
20 x 15 T-6
140 Pattern Wide Blade
16,5 x 13
HCAQ9730
Sport
20 x 16
140 Pattern
16,5 x 14
HCAQ9731
Sport
20 x 18
HCAQ9656
Giant Scale Formula GT
20 x 18 -1
HCAQ9601
175 Pattern
20,5 x 10
APC pusher airscrews for combustion motors
(anticlockwise rotation)
These airscrews have the same characteristics as the normal combustion airscrews, but are configured to run anticlockwise, making them
ideal for models employing a pusher drive system, or multi-engine
models with contra-rotating drives (Note that a combustion motor is
designed to run only in one direction, and may have to be rebuilt by
a specialist).
HCAQ9713
Sport
14 x 7
HCAQ9590
HCAQ9714
Sport
14 x 8
HCAQ9571
HCAQ9711
Sport
14 x 10
HCAQ9739
YS 91
14 x 11
HCAQ9747
3D Fun Fly Wide Blade
17 x 4
HCAQ9530
120 Pattern
14 x 12
HCAQ9658
IMAC Aerobatic
17 x 6
HCAQ9554
120 Pattern Narrow
14 x 12
HCAQ9576
140 Pattern
17 x 8
HCAQ9602
175 Pattern
21 x 10
HCAQ9531
120 Pattern
14 x 13
HCAQ9588
140 Pattern Narrow
17 x 8
HCAQ9663
IMAC Aerobatic Wide Blade
21 x 10
HCAQ9552
120 Pattern / Warbird Narrow
14 x 13
HCAQ9572
140 Pattern
17 x 10
HCAQ9532
120 Pattern
14 x 13,5
HCAQ9584
140 Pattern Narrow
17 x 10
HCAQ9655
Giant Scale Formula
22 x 8
HCAQ9555
120 Pattern Narrow
14 x 13,5
HCAQ9573
140 Pattern
17 x 12
HCAQ9654
Giant Scale Formula
22 x 10
HCAQ9533
120 Pattern
14 x 14
HCAQ9591
140 Pattern Wide Blade
17 x 12
HCAQ9733
Sport
22 x 14
HCAQ9553
120 Pattern / Warbird Narrow
14 x 14
HCAQ9586
140 Pattern Narrow
17 x 12
HCAQ9534
120 Pattern
14,4 x 10,5
HCAQ9585
140 Pattern Narrow
17 x 12,5
HCAQ9734
Sport
24 x 10
HCAQ9804
Sport Pusher
10 x 6
HCAQ9535
120 Pattern
14,4 x 12
HCAQ9574
140 Pattern
17 x 12,75
HCAQ9735
Sport
24 x 14
14,4 x 13
17 x 13
10 x 7
120 Pattern
140 Pattern
Sport Pusher
HCAQ9536
HCAQ9575
HCAQ9805
HCAQ9537
120 Pattern
14,4 x 13,5
HCAQ9587
140 Pattern Narrow
17 x 13
HCAQ9737
Sport
26 x 8
HCAQ9538
120 Pattern
14,4 x 14
HCAQ9718
Sport
17 x 18
HCAQ9736
Sport
26 x 14
HCAQ9563
120 Pattern Wide Blade
14,5 x 13
HCAQ9719
Sport
17,5 x 18
HCAQ9556
120 Pattern Narrow
14,5 x 14,5
HCAQ9557
120 Pattern Narrow
14,5 x 14
15 inch diameter
HCAQ9744
HCAQ9715
HCAQ9716
HCAQ9544
HCAQ9539
HCAQ9540
HCAQ9541
HCAQ9564
HCAQ9542
HCAQ9543
HCAQ9559
HCAQ9565
HCAQ9566
HCAQ9567
HCAQ9558
3D Fun Fly Wide Blade
Sport
Sport
120 Pattern
120 Pattern
120 Pattern
120 Pattern
120 Pattern Wide Blade
120 Pattern
120 Pattern
120 Pattern Narrow
120 Pattern Wide Blade
120 Pattern Wide Blade
120 Pattern Wide Blade
120 Pattern Narrow
15 x 4
15 x 6
15 x 7
15 x 8
15 x 10
15 x 11
15 x 12
15 x 12
15 x 13
15 x 14
15 x 14
15,5 x 11,5
15,5 x 12,5
15,5 x 12
15,5 x 13
16 inch diameter
HCAQ9745
HCAQ9717
HCAQ9549
HCAQ9550
HCAQ9545
52
Order no.
HCAQ9546
3D Fun Fly Wide Blade
Sport
120 Pattern
120 Pattern
120 Pattern
16 x 4
16 x 6
16 x 7
16 x 8
16 x 10
17 inch diameter
21 inch diameter
22 inch diameter
24 inch diameter
26 inch diameter
18 inch diameter
Order no.
Description
Size
APC pusher airscrews for combustion motors (anticlockwise rotation)
HCAQ9802
Sport Pusher
7x6
HCAQ9803
Sport Pusher
9x6
HCAQ9806
Sport Pusher
10 x 8
HCAQ9807
Sport Pusher
11 x 6
HCAQ9808
Sport Pusher
11 x 7
PowerPoint wooden airscrews
Wooden airscrews
APC 2-blade airscrews for combustion motors
Order no.
PowerPoint wooden airscrews, made from light
beech wood, are lighter than those from maple,
and torsionally stronger than nylon airscrews.
The low mass allows the motor to vary speed
faster, and accelerate better. Thanks to their
special shape, PowerPoint wooden
airscrews are very efficient, deriving
maximum power from the motor.
Description
Size
PowerPoint wooden airscrews
TOPQ5000
Wooden airscrew
7x4
TOPQ5010
Wooden airscrew
7x6
TOPQ5020
Wooden airscrew
8x4
TOPQ5030
Wooden airscrew
8x6
TOPQ5050
Wooden airscrew
9x4
TOPQ5055
Wooden airscrew
9x5
TOPQ5060
Wooden airscrew
9x6
TOPQ5065
Wooden airscrew
9x7
TOPQ5075
Wooden airscrew
10 x 4
TOPQ5080
Wooden airscrew
10 x 5
TOPQ5085
Wooden airscrew
10 x 6
TOPQ5086
Wooden airscrew
10 x 7
TOPQ5090
Wooden airscrew
10 x 8
TOPQ5095
Wooden airscrew
11 x 4
TOPQ5105
Wooden airscrew
11 x 6
TOPQ5110
Wooden airscrew
11 x 7
TOPQ5120
Wooden airscrew
11 x 8
TOPQ5125
Wooden airscrew
11 x 10
TOPQ5140
Wooden airscrew
12 x 6
TOPQ5145
Wooden airscrew
12 x 8
TOPQ5155
Wooden airscrew
13 x 6
TOPQ5160
Wooden airscrew
13 x 8
TOPQ5170
Wooden airscrew
14 x 6
TOPQ5171
Wooden airscrew
14 x 8
TOPQ5175
Wooden airscrew
15 x 6
TOPQ5176
Wooden airscrew
15 x 6-10
TOPQ5180
Wooden airscrew
15 x 8
TOPQ5200
Wooden airscrew
16 x 6
TOPQ5205
Wooden airscrew
16 x 8
TOPQ5215
Wooden airscrew
18 x 6
TOPQ5216
Wooden airscrew
18 x 6-10
TOPQ5220
Wooden airscrew
18 x 8
HCAQ9748
3D Fun Fly Wide Blade
18 x 6
HCAQ9724
Sport
18 x 8
HCAQ9659
IMAC Aerobatic Wide Blade
18 x 8
HCAQ9720
Sport
18 x 10
HCAQ9577
140 Pattern
18 x 10
HCAQ9811
Sport Pusher
14 x 6
HCAQ9578
140 Pattern
18 x 11
HCAQ9801
140 Pattern / Sport Pusher
16 x 14
HCAQ9592
140 Pattern Wide Blade
18 x 11
HCAQ9721
Sport
18 x 12
HCAQ9722
Sport
18 x 14
HCAQ9723
Sport
18 x 16
HCAQ9579
140 Pattern
18,1 x 10
HCAQ9593
140 Pattern Wide Blade
18,1 x 10
HCAQ9580
140 Pattern
18,1 x 11
HCAQ9581
140 Pattern
18,1 x 12
HCAQ9582
140 Pattern
18,5 x 9,5
HCAQ9599
170 Pattern Wide Blade
18,5 x 10,25
HCAQ9828
Carbon Q40
7,4 x 7,5
TOPQ5231
Wooden airscrew
20 x 6-10
HCAQ9600
170 Pattern Wide Blade
18,5 x 12
HCAQ9829
Carbon Q40
7,4 x 7,6
TOPQ5235
Wooden airscrew
20 x 8
HCAQ9830
Carbon Q40
7,4 x 7,7
TOPQ5240
Wooden airscrew
20 x 10
19 inch diameter
APC carbon airscrews
HCAQ9809
Sport Pusher
12 x 6
HCAQ9810
Sport Pusher
13 x 6
HCAQ9800
APC carbon airscrews contain a high proportion of carbon fibre,
making them ideal for drives with high speed revolution, such as pylon
models.
Order no.
Description
Size
APC carbon airscrews
HCAQ9812
3D Fun Fly Wide Blade Pusher
Sport Pusher
18 x 6
20 x 10
HCAQ9660
IMAC Aerobatic Wide Blade
19 x 8
HCAQ9831
Carbon Q40
7,5 x 2,5
TOPQ5241
Wooden airscrew
22 x 6-10
HCAQ9596
170 Pattern
19 x 11
HCAQ9825
Carbon
7,8 x 6
TOPQ5260
Wooden airscrew
22 x 10
HCAQ9725
Sport
19 x 14
HCAQ9826
Carbon
7,8 x 7
TOPQ5265
Wooden airscrew
24 x 8
HCAQ9726
Sport
19 x 16
HCAQ9827
Carbon
9 x 7,5
TOPQ5270
Wooden airscrew
24 x 10
HCAQ9597
170 Pattern
19,5 x 11,5
HCAQ9832
Giant Scale Carbon Fiber
20 x 15
53
Aluminium spinners
The polished aluminium spinners not only improve
the model’s aerodynamics, but also enhance it’s
appearance considerably. High quality production
ensures true-running.
Nylon spinners
Order no.
GPMQ4550
Description
Aluminium spinners
Diameter
1-1/2" (38 mm)
GPMQ4551
Aluminium spinners
1-3/4" (45 mm)
GPMQ4552
Aluminium spinners
2" (51 mm)
GPMQ4553
Aluminium spinners
2-1/4" (57 mm)
GPMQ4554
Aluminium spinners
2-1/2" (46 mm)
GPMQ4555
Aluminium spinners
2-3/4" (70 mm)
GPMQ4556
Aluminium spinners
3" (76 mm)
Aluminium-/Nylon spinners
54
The nylon spinners are made from pure nylon, making them
extremely stable, durable and safe to operate. The spinners
are available in black, white and red - in seven different sizes.
Order no.: GPMQ9006
Order no.
GPMQ4500
Description
Nylon spinners
Diameter
1-1/2" (38 mm)
Color
White
GPMQ4501
Nylon spinners
1-1/2" (38 mm)
Black
GPMQ4502
Nylon spinners
1-1/2" (38 mm)
Red
GPMQ4505
Nylon spinners
1-3/4" (45 mm)
White
GPMQ4506
Nylon spinners
1-3/4" (45 mm)
Black
GPMQ4507
Nylon spinners
1-3/4" (45 mm)
Red
GPMQ4510
Nylon spinners
2" (51 mm)
White
GPMQ4511
Nylon spinners
2" (51 mm)
Black
GPMQ4512
Nylon spinners
2" (51 mm)
Red
GPMQ4515
Nylon spinners
2-1/4" (57 mm)
White
GPMQ4516
Nylon spinners
2-1/4" (57 mm)
Black
GPMQ4517
Nylon spinners
2-1/4" (57 mm)
Red
GPMQ4520
Nylon spinners
2-1/2" (64 mm)
White
GPMQ4521
Nylon spinners
2-1/2" (64 mm)
Black
GPMQ4522
Nylon spinners
2-1/2" (64 mm)
Red
GPMQ4525
Nylon spinners
2-3/4" (70 mm)
White
GPMQ4526
Nylon spinners
2-3/4" (70 mm)
Black
GPMQ4527
Nylon spinners
2-3/4" (70 mm)
Red
GPMQ4530
Nylon spinners
3" (76 mm)
White
GPMQ4531
Nylon spinners
3" (76 mm)
Black
GPMQ4532
Nylon spinners
3" (76 mm)
Red
Dummy Pilots
Models first look really good when they have a pilot!
With our pre-painted, light, durable plastic dummies, every model can
have it‘s own pilot.
The dummy pilots are available in various sizes (1/3, 1/4, and 1/5 scale)
each in red, blue and yellow.
Order no.: GPMQ9060
Order no.: GPMQ9062
Order no.
GPMQ9005
Description
Dummy pilot 1/3 Sport
Dimensions (ca. W x H)
175 mm x 135 mm
Colour
Red
GPMQ9006
Dummy pilots 1/3 Sport
175 mm x 135 mm
Blue
GPMQ9007
Dummy pilot 1/3 Sport
175 mm x 135 mm
Yellow
GPMQ9010
Dummy pilot 1/4 Sport
145 mm x 135 mm
Red
GPMQ9011
Dummy pilot 1/4 Sport
145 mm x 135 mm
Blue
GPMQ9012
Dummy pilot 1/4 Sport
145 mm x 135 mm
Yellow
GPMQ9015
Dummy pilot 1/5 Sport
103 mm x 90 mm
Red
GPMQ9016
Dummy pilot 1/5 Sport
103 mm x 90 mm
Blue
GPMQ9017
Dummy pilot 1/5 Sport
103 mm x 90 mm
Yellow
GPMQ9054
Dummy pilot 1/3 Civilian
175 mm x 135 mm
Red
GPMQ9055
Dummy pilot 1/3 Civilian
175 mm x 135 mm
Blue
GPMQ9056
Dummy pilot 1/3 Civilian
175 mm x 135 mm
Yellow
GPMQ9058
Dummy pilot 1/4 Civilian
145 mm x 135 mm
Red
GPMQ9059
Dummy pilot 1/4 Civilian
145 mm x 135 mm
Blue
GPMQ9060
Dummy pilot 1/4 Civilian
145 mm x 135 mm
Yellow
GPMQ9062
Dummy pilot 1/5 Civilian
113 mm x 115 mm
Red
GPMQ9063
Dummy pilot 1/5 Civilian
113 mm x 115 mm
Blue
GPMQ9064
Dummy pilot 1/5 Civilian
113 mm x 115 mm
Yellow
55
Aircraft accessories
Batterypack shrink tubing
Silicon fuel tube
Order no.
HCAQ7820
Description
Shrink tubing 46 mm, transparant (1 m)
Order no.
HCAQ7911
Description
2 x 3.5 mm Blue-line Silicon Fuel Tube (1 m)
HCAQ7821
Shrink tubing 46 mm, black (1 m)
HCAQ7912
2 x 5 mm Blue-line Silicon Fuel Tube (1 m)
HCAQ7830
Shrink tubing 70 mm, transparant (1 m)
HCAQ7913
2 x 6 mm Blue-line Silicon Fuel Tube (1 m)
HCAQ7831
Shrink tubing 70 mm, black (1 m)
HCAQ7914
2.5 x 6 mm Blue-line Silicon Fuel Tube (1 m)
HCAQ7840
Shrink tubing 91 mm, transparant (1 m)
HCAQ7841
Shrink tubing 91 mm, black (1 m)
Fuel/water tube coupler plastic (2 pcs)
Fuel filters
Description
"Elbow" Fuel / water tube connector (2 pcs)
HCAQ7937
"Straight" Fuel / water tube connector (2 pcs)
Order no.
HCAQ7991
Description
Fuel line plug Ø 2 mm (5 pcs)
Order no.
HCAQ7946
Description
Fuel Tubing Coupler Ø 2 mm (2 pcs)
HCAQ7938
"T-type" Fuel / water tube connector (2 pcs)
HCAQ7992
Fuel line plug Ø 3 mm (5 pcs)
HCAQ7947
Fuel Tubing Coupler Ø 3 mm (2 pcs)
HCAQ7951
Fuel Tubing Coupler Y Ø 2 mm (2 pcs)
HCAQ7952
Fuel Tubing Coupler Y Ø 3 mm (2 pcs)
Fueling valves
Pressure nipple
Star-line silicon fuel tube
Order no.
HCAQ7976
Description
Fuel filter "standard" (1 pc)
HCAQ7977
Fuel filter "car" (1 pc)
HCAQ7978
Fuel filter w/ sintered filter (1 pc)
HCAQ7979
Fuel filter "large" (1 pc)
Exhaust deflector
Description
Shrink tubing 2.4 mm, Red & Black (10 pcs)
HCAQ7852
Shrink tubing 3.2 mm, Red & Black (10 pcs)
HCAQ7853
Shrink tubing 4.7 mm, Red & Black (10 pcs)
HCAQ7854
Shrink tubing 6.4 mm, Red & Black (10 pcs)
HCAQ7855
Shrink tubing 9.5 mm, Red & Black (10 pcs)
Fuel tubing coupler
Order no.
HCAQ7936
Shrink tubing for wires & connectors
Order no.
HCAQ7851
Fuel line plug
Order no.
HCAQ7916
Description
2,5 x 6mm, Star-line Silicon Fuel Tube Yellow (1 m)
HCAQ7917
2,5 x 6mm, Star-line Silicon Fuel Tube Pink (1 m)
Fuel tank hardware
Order no.
HCAQ7931
Description
Pressure nipple M3 (2 pcs)
HCAQ7932
Pressure nipple M4 (2 pcs)
HCAQ7933
Pressure nipple M5 (2 pcs)
Order no.
HCAQ7986
Description
Fuel Tank hardware (1 set)
HCAQ7987
Fuel Tank hardware large (1 set)
Fuselage fuel connection
Fuel tubing for gasoline engines (1m)
Battery soldering hammer
Order no.
HCAQ7996
Description
Exhaust deflector 10 mm 45°
HCAQ7997
Exhaust deflector 8 mm 45°
HCAQ7998
Exhaust deflector 6 mm 45°
Fuel tank clunk
Order no.
HCAQ7771
56
Description
Battery soldering hammer (1 pc)
Order no.
HCAQ7921
Description
3 x 6 mm Neoprene Gasoline tube (1 m)
HCAQ7926
3 x 6 mm TYGON gasoline tube (1 m)
Order no.
HCAQ7961
Description
Fueling Valve Glow small (1 pc)
HCAQ7962
Fueling Valve Gasoline small (1 pc)
HCAQ7963
Fueling Valve Glow Large (1 pc)
HCAQ7964
Fueling Valve Gasoline Large (1 pc)
HCAQ7970
Fueling tip Small (1 pc)
HCAQ7971
Fueling tip large (1 pc)
Order no.
HCAQ7941
Order no.
HCAQ7981
Description
Fuel tank clunk (1 pc)
HCAQ7982
Fuel tank clunk with sintered filter (1 pc)
HCAQ7983
Fuel can clunk filter (1 pc)
Description
Fuselage fuel connection (1 pc)
57
Aircraft accessories
Threaded coupler
Order no.
HCAQ8011
Description
Threaded Coupler M2 Ø 0.8 mm (5 pcs)
HCAQ8012
Threaded Coupler M2 Ø 1.2 mm (5 pcs)
HCAQ8013
Threaded Coupler M2 Ø 1.6 mm (5 pcs)
HCAQ8014
Threaded Coupler M2 Ø 2.1 mm (5 pcs)
HCAQ8015
Threaded Coupler M2.5 Ø 2.3 mm (5 pcs)
HCAQ8016
Threaded Coupler M3 Ø 2.8 mm (5 pcs)
Plastic clevis for carbon rod
Order no.
HCAQ8041
Description
Precision tension couplers M2, Brass (2 pcs)
Order no.
HCAQ8055
Description
Plastic clevis for Ø 1.5 mm carbon rod (5 pcs)
HCAQ8042
Precision tension couplers M2.5, Aluminium (2 pcs)
HCAQ8056
Plastic clevis for Ø 2.0 mm carbon rod (5 pcs)
HCAQ8043
Precision tension couplers M3, Brass (2 pcs)
Metal clevis
Plastic clevis
Aluminium ball link
Description
Metal clevis M2 (5 pcs)
HCAQ8067
Metal clevis M2.5 (5 pcs)
HCAQ8068
Metal clevis M3 (5 pcs)
Aluminium clevis heavy duty
Order no.
HCAQ8021
Description
Aluminium Threaded Coupler M2 for carbon Tube Ø 3 mm (5 pcs)
HCAQ8022
Aluminium Threaded Coupler M2.5 for carbon Tube Ø 3 mm (5 pcs)
HCAQ8023
Aluminium Threaded Coupler M2 for carbon Tube Ø 4 mm (5 pcs)
HCAQ8024
Aluminium Threaded Coupler M2.5 for carbon Tube Ø 4 mm (5 pcs)
HCAQ8025
Aluminium Threaded Coupler M3 for carbon Tube Ø 4 mm (5 pcs)
HCAQ8026
Aluminium Threaded Coupler M2 for carbon Tube Ø 5 mm (5 pcs)
HCAQ8027
Aluminium Threaded Coupler M2.5 for carbon Tube Ø 5 mm (5 pcs)
HCAQ8028
Aluminium Threaded Coupler M3 for carbon Tube Ø 5 mm (5 pcs)
HCAQ8029
Aluminium Threaded Coupler M2 for carbon Tube Ø 6 mm (5 pcs)
Order no.
HCAQ8071
Description
Aluminium clevis heavy duty M2 (2 pcs)
HCAQ8030
Aluminium Threaded Coupler M2.5 for carbon Tube Ø 6 mm (5 pcs)
HCAQ8072
Aluminium clevis heavy duty M3 (2 pcs)
HCAQ8031
Aluminium Threaded Coupler M3 for carbon Tube Ø 6 mm (5 pcs)
HCAQ8073
Aluminium clevis heavy duty M4 (2 pcs)
Order no.
HCAQ8036
Description
Cable Coupler M2 (5 pcs)
HCAQ8037
Cable coupler M3 (5 pcs)
Order no.
HCAQ8061
Description
Micro Clevis (5 pcs)
HCAQ8062
Small Clevis (5 pcs)
HCAQ8063
Large Clevis (5 pcs)
Plastic clevis
Ball link M3
Description
Aluminium ball link M2 (2 pcs)
Order no.
HCAQ8156
Description
Ball Link large M3 - M3 short (2 pcs)
HCAQ8162
Aluminium ball link M2.5 (2 pcs)
HCAQ8157
Ball link large M3 - M3 Long (2 pcs)
HCAQ8163
Aluminium ball link M3 (2 pcs)
HCAQ8164
Aluminium ball link M4 (2 pcs)
Ball link M2
Order no.
HCAQ8066
Ball link M2
Order no.
HCAQ8161
Aluminium threaded coupler for carbon tube
Cable coupler
58
Precision tension couplers
Control horns
Order no.
HCAQ8141
Description
Ball link medium M2 - M2 (2 pcs)
HCAQ8142
Ball link medium M2 - M2 short (2 pcs)
HCAQ8143
Ball link medium M2 - M2 Long (2 pcs)
Ball link M2.5
Order no.
HCAQ8131
Description
Ball link M2 small (2 pcs)
HCAQ8132
Ball link M2 large (2 pcs)
Ball link M2
Aluminium clevis heavy duty
with safety clip
Order no.
HCAQ8076
HCAQ8077
Description
M3 Aluminium clevis heavy duty with safety clip
(2 pcs)
M4 Aluminium clevis heavy duty with safety clip
(2 pcs)
Order no.
HCAQ8136
Description
Ball link small M2 - M2 short (2 pcs)
HCAQ8137
Ball Link small M2 - M2 Long (2 pcs)
Order no.
HCAQ8146
Description
Ball link medium M2.5- M2 (2 pcs)
HCAQ8147
Ball link medium M2.5 - M2 Short (2 pcs)
HCAQ8148
Ball link medium M2.5 - M2 Long (2 pcs)
Ball link M3
Order no.
HCAQ8046
Description
Swing in keeper (5 pcs)
HCAQ8051
Plastic clevis M2 (5 pcs)
HCAQ8052
Plastic clevis M2 (5 pcs)
HCAQ8053
Plastic clevis with locking screw for wires up to Ø 2 mm
(2 pcs)
Order no.
HCAQ8081
Description
Micro control horn 8 mm, Ø 1 mm holes (2 pcs)
HCAQ8082
Small Control Horn 19 mm, Ø 1 mm holes (2 pcs)
HCAQ8083
Small Control Horn 19 mm, Ø 1.6 mm holes (2 pcs)
HCAQ8084
Large Control Horn 34 mm, Ø 2.5 mm holes(2 pcs)
HCAQ8086
Control horn 22 mm w/ screws (2 pcs)
Order no.
HCAQ8151
Description
Ball link large M3 - M3 short (2 pcs)
HCAQ8087
Control horn 30 mm w/ screws (2 pcs)
HCAQ8091
Control horn 30 mm w/ M3 nuts (2 pcs)
HCAQ8152
Ball link large M3 - M3 Long (2 pcs)
HCAQ8096
Control horn "closed loop" (2 pcs)
59
Aircraft accessories
Adjustable control horn
Aluminium steering arm
Tailwheel aluminium hub (1pc)
Order no.
HCAQ8101
Description
Control horn "adjustable", surface fix (2 pcs)
Order no.
HCAQ8126
Description
Ø 3 mm Metal Double steering arm, Short (1 pc)
Order no.
HCAQ8281
Description
Tailwheel 10mm, aluminium hub (1 pc)
HCAQ8102
Control horn "adjustable", through fix (2 pcs)
HCAQ8127
Ø 4 mm Metal Double steering arm, Short (1 pc)
HCAQ8282
Tailwheel 15mm, aluminium hub (1 pc)
HCAQ8128
Ø 3 mm Metal Double steering arm, long (1 pc)
HCAQ8283
Tailwheel 19mm, aluminium hub (1 pc)
HCAQ8129
Ø 4 mm Metal Double steering arm, long (1 pc)
HCAQ8284
Tailwheel 25mm, aluminium hub (1 pc)
HCAQ8285
Tailwheel 30mm, aluminium hub (1 pc)
Control horn „indoor“ for carbon rod
All moving tailplane horn 90°
Order no.
HCAQ8106
Description
Control horn "indoor" for Ø 1.5 mm carbon rod (2 pcs)
HCAQ8107
Control horn "indoor" for Ø 2.0 mm carbon rod (2 pcs)
Steering Arm
Order no.
HCAQ8001
Description
All moving tailplane horn 90° (1 pc)
HCAQ8006
90° Bell crank w/ screw and nuts (2 pcs)
Indoor wheels & wheel axles
60
Order no.
HCAQ8111
Description
Steering Arm 16 mm Ø 3 mm (1 pc)
HCAQ8112
Steering Arm 16 mm Ø 4 mm (1 pc)
HCAQ8116
Steering arm "single" 33 mm Ø 4 mm (1 pc)
HCAQ8117
Steering arm "single" 33 mm Ø 3 mm (1 pc)
HCAQ8121
Steering arm "double" 66 mm Ø 4 mm (1 pc)
HCAQ8122
Steering arm "double" 66 mm Ø 3 mm (1 pc)
Description
Lightweight wheel 25 mm "Indoor" (2 pcs)
HCAQ8296
Wheelaxle "angled" for 2 mm carbon rod incl. wheels
(2 pcs)
Order no.
HCAQ8201
Description
Nylon gear block Ø 3 mm (5 pcs)
HCAQ8202
Nylon gear block Ø 4 mm (5 pcs)
HCAQ8203
Nylon gear block Ø 5 mm (5 pcs)
HCAQ8204
Nylon gear block Ø 6 mm (5 pcs)
Nylon landing gear strap
Pinned hinge
Order no.
HCAQ8166
Description
Small pinned hinge (10 pcs)
HCAQ8167
Large pinned hinge (10 pcs)
Nylon threaded block
Order no.
HCAQ8181
Description
Nylon threaded block M4 (2 pcs)
HCAQ8182
Nylon threaded block M5 (2 pcs)
HCAQ8183
Nylon threaded block M6 (2 pcs)
HCAQ8184
Wingbolt bracket M6 (2 pcs)
Flex hinge
Nylon wingbolt
Wheel collar
Order no.
HCAQ8206
Description
Nylon landing gear strap small (5 pcs)
HCAQ8207
Nylon landing gear strap medium (5 pcs)
Nylon landing gear strap Large (5 pcs)
Order no.
HCAQ8231
Description
Wheel collar Ø 1.6 x 6.0 mm (5 pcs)
HCAQ8208
HCAQ8232
Wheel collar Ø 2.1 x 6.0 mm (5 pcs)
Nylon landing gear clamp
HCAQ8233
Wheel collar Ø 2.6 x 8.0 mm (5 pcs)
HCAQ8234
Wheel collar Ø 3.1 x 8.0 mm (5 pcs)
HCAQ8235
Wheel collar Ø 4.1 x 8.0 mm (5 pcs)
Order no.
HCAQ8171
Description
Micro flex hinge (10 pcs)
HCAQ8236
Wheel collar Ø 5.1 x 10.0 mm (5 pcs)
HCAQ8172
Small Flex hinge (10 pcs)
HCAQ8237
Wheel collar Ø 6.1 x 10.0 mm (5 pcs)
HCAQ8173
Large Flex hinge (10 pcs)
HCAQ8238
Wheel collar Ø 8.1 x 10.0 mm (5 pcs)
Landing gear axle
Order no.
HCAQ8291
Nylon gear block
Order no.
HCAQ8211
Description
Nylon landing gear clamp Ø 2 mm (5 pcs)
HCAQ8212
Nylon landing gear clamp Ø 3 mm (5 pcs)
HCAQ8213
Nylon landing gear clamp Ø 4 mm (5 pcs)
Order no.
HCAQ8186
Description
Nylon wingbolt M6 (5 pcs)
HCAQ8187
Nylon wingbolt M5 (5 pcs)
HCAQ8188
Nylon wingbolt M4 (5 pcs)
Streamline washer
Pin Type Hinge
Order no.
HCAQ8191
Description
Streamline washer for M4 screws (5 pcs)
HCAQ8192
Streamline washer for M5 screws (5 pcs)
Wing rubber bands
Wheel cover holder
Order no.
HCAQ8241
Description
Landing gear axle Ø 4 mm (2 pcs)
HCAQ8242
Landing gear axle Ø 5 mm (2 pcs)
HCAQ8243
Landing gear axle Ø 6 mm (2 pcs)
Order no.
HCAQ8176
Description
Pin Type Hinge (10 pcs)
Order no.
HCAQ7901
Description
Wing rubber bands 70 x 5 mm (20pcs)
Order no.
HCAQ8221
Description
Wheel cover holder Ø 3 mm (2 pcs)
HCAQ7902
Wing rubber bands 90 x 5 mm (20pcs)
HCAQ7903
Wing rubber bands 100 x 5 mm (20pcs)
HCAQ8222
Wheel cover holder Ø 3.5 mm (2 pcs)
HCAQ7904
Wing rubber bands 120 x 10 mm (10 pcs)
HCAQ8223
Wheel cover holder Ø 4 mm (2 pcs)
HCAQ7905
Wing rubber bands 150 x 10 mm (10 pcs)
HCAQ8224
Wheel cover holder Ø 5 mm (2 pcs)
HCAQ7906
Wing rubber bands 180 x 10 mm (10 pcs)
HCAQ8225
Wheel cover holder Ø 6 mm (2 pcs)
HCAQ7907
Wing rubber bands 200 x 10 mm (10 pcs)
61
Aircraft accessories
Tow hook
Velcro back to back (50cm)
Order no.
HCAQ6291
Description
Tow hook, 2.15x20mm, Galvanized Steel (2 pcs)
HCAQ6292
Tow hook, 2.40x25mm, Galvanized Steel (2 pcs)
Canopy latch
Order no.
HCAQ7866
Heavy duty servo arm
Description
Velcro back to back (50cm)
Triple rod connector
Description
Heavy duty servo arm "single",35mm, JR (2 pcs)
HCAQ8357
Heavy duty servo arm "single",35mm, Futaba (2 pcs)
HCAQ8361
Heavy duty servo arm "double",70mm, JR (2 pcs)
HCAQ8362
Heavy duty servo arm "double",70mm, Futaba (2 pcs)
Order no.
HCAQ8251
Description
Canopy latch "small" (1 pc)
HCAQ8252
Canopy latch "large" (1 pc)
Description
Triple rod connector Ø 2 mm (1 pc)
Triple rod connector Ø 3 mm (1 pc)
HCAQ8322
HCAQ8323
HCAQ8324
HCAQ8326
HCAQ8327
HCAQ8328
Adjustable push rod connector
HCAQ8329
Tow coupler
HCAQ8330
HCAQ8331
HCAQ8332
Order no.
HCAQ8246
Description
Tow coupler Small (1 pc)
HCAQ8247
Tow Coupler Large (1 pc)
Order no.
HCAQ8256
Description
Adjustable micro push rod connectors (5 pcs)
HCAQ8257
Adjustable mini push rod connectors (5 pcs)
Velcro self-adhesive (50 cm)
Order no.
HCAQ8366
Description
Precision aluminium Double servo arm 46mm, JR (1 pc)
HCAQ8367
HCAQ8368
Precision aluminium Double servo arm 46mm, FUTABA
(1 pc)
Precision aluminium Double servo arm 46mm, HITEC (1 pc)
HCAQ8371
Precision aluminium Single servo arm 28mm, JR (1 pc)
HCAQ8372
HCAQ8373
Precision aluminium Single servo arm 28mm, FUTABA
(1 pc)
Precision aluminium Single servo arm 28mm, HITEC (1 pc)
HCAQ8376
Precision aluminium Round servo arm Ø 28mm, JR (1 pc)
HCAQ8377
Precision aluminium Round servo arm Ø 28mm, FUTABA
(1 pc)
Precision aluminium Round servo arm Ø 28mm, HITEC
(1 pc)
HCAQ8378
Order no.
HCAQ7861
Description
Velcro self-adhesive, 20 mm wide (50cm)
HCAQ7862
Velcro self-adhesive, 38 mm wide (50cm)
Prop adapter
„screw type“
long
M6
Order no.
HCAQ8321
HCAQ8325
Order no.
HCAQ8271
HCAQ8272
Flexible propeller mount
short
Order no.
HCAQ8356
Precision aluminium round servo arm
Wing servo mount
HCAQ8333
HCAQ8334
HCAQ8335
HCAQ8336
Description
Collet prop adapter M5 Ø 2 mm
(1 pc)
Collet prop adapter M5 Ø 2.3 mm
(1 pc)
Collet prop adapter M5 Ø 3 mm
(1 pc)
Collet prop adapter M5 Ø 3.2 mm
(1 pc)
Collet prop adapter M5 Ø 2 mm
(1 pc)
Collet prop adapter M5 Ø 2.3 mm
(1 pc)
Collet prop adapter M5 Ø 3 mm
(1 pc)
Collet prop adapter M5 Ø 3 mm
(1 pc)
Collet prop adapter M5 Ø 3.2 mm
(1 pc)
Collet prop adapter M6 Ø 4 mm
(1 pc)
Collet prop adapter M6 Ø 5 mm
(1 pc)
Collet prop adapter M8 Ø 5 mm
(1 pc)
Collet prop adapter M8 Ø 6 mm
(1 pc)
Collet prop adapter M8 Ø 6.35 mm
(1 pc)
Collet prop adapter M10 Ø 6 mm
(1 pc)
Collet prop adapter M10 Ø 8 mm
(1 pc)
Order no.
HCAQ8301
HCAQ8302
HCAQ8303
HCAQ8304
HCAQ8305
HCAQ8306
HCAQ8307
HCAQ8308
HCAQ8309
HCAQ8310
HCAQ8311
Description
Flexible propeller mount 8 mm for Ø 2 mm shaft
(1 pc)
Flexible propeller mount 8 mm for Ø 2,3 mm shaft
(1 pc)
Flexible propeller mount 8 mm for Ø 3 mm shaft
(1 pc)
Flexible propeller mount 8 mm for Ø 3,2 mm shaft
(1 pc)
Flexible propeller mount 9,6 mm for Ø 2,3 mm shaft
(1 pc)
Flexible propeller mount 9,6 mm for Ø 3 mm shaft
(1 pc)
Flexible propeller mount 9,6 mm for Ø 3,2 mm shaft
(1 pc)
Flexible propeller mount 9,6 mm for Ø 4 mm shaft
(1 pc)
Flexible propeller mount 5,5 mm for Ø 2 mm shaft
(1 pc)
Flexible propeller mount 5,5 mm for Ø 3 mm shaft
(1 pc)
Flexible propeller mount 5,5 mm for Ø 4 mm shaft
(1 pc)
M8
M10
Order no.
HCAQ8341
Description
M6 Prop adapter "screw type" for shaft Ø 2 mm (1 pc)
HCAQ8342
M6 Prop adapter "screw type" for shaft Ø 2,3 mm (1 pc)
HCAQ8343
M6 Prop adapter "screw type" for shaft Ø 3 mm (1 pc)
HCAQ8344
M6 Prop adapter "screw type" for shaft Ø 3,2 mm (1 pc)
HCAQ8345
M8 Prop adapter "screw type" for shaft Ø 2,3 mm (1 pc)
HCAQ8346
M8 Prop adapter "screw type" for shaft Ø 3,2 mm (1 pc)
HCAQ8347
M8 Prop adapter "screw type" for shaft Ø 4 mm (1 pc)
HCAQ8348
M8 Prop adapter "screw type" for shaft Ø 5 mm (1 pc)
HCAQ8349
M10 Prop adapter "screw type" for shaft Ø 5 mm (1 pc)
HCAQ8350
M10 Prop adapter "screw type" for shaft Ø 6 mm (1 pc)
Servo mounting brackets
Order no.
HCAQ8266
HCAQ8267
Description
Wing servo mount: S148; HS300; SRM102; NES507. (1pair)
Wing servo mount: S143; HS 80; NES341. (1pair)
Order no.
HCAQ8261
62
Collet prop adapter
Description
Servo mounting brackets (2 pairs)
63
Nuts and bolts
Socket head screw
64
Order no.
Description
HCAQ6041
Socket head screw, M5X40, Steel (10 pcs)
HCAQ6042
Socket head screw, M6X8, Steel (10 pcs)
HCAQ6043
Socket head screw, M6X10, Steel (10 pcs)
HCAQ6044
Socket head screw, M6X12, Steel (10 pcs)
HCAQ6045
Socket head screw, M6X16, Steel (10 pcs)
HCAQ6046
Socket head screw, M6X20, Steel (10 pcs)
HCAQ6047
Socket head screw, M6X25, Steel (10 pcs)
HCAQ6048
Socket head screw, M6X30, Steel (10 pcs)
HCAQ6049
Socket head screw, M6X35, Steel (10 pcs)
HCAQ6050
Socket head screw, M6X40, Steel (10 pcs)
Socket low round head screw
Set screw
Nut
Closed round head nut
Order no.
HCAQ6131
Description
Set M3X3 screw, Steel (10 pcs)
HCAQ6132
Set M3X5 screw, Steel (10 pcs)
Order no.
HCAQ6171
Description
Nut , M1.6, Galvanized Steel (10 pcs)
Order no.
HCAQ6211
Description
M3 Closed round head nut , Galvanized Steel (10 pcs)
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6133
Set M3X8 screw, Steel (10 pcs)
HCAQ6172
Nut , M2, Galvanized Steel (10 pcs)
HCAQ6212
M4 Closed round head nut, Galvanized Steel (10 pcs)
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6134
Set M3X10 screw, Steel (10 pcs)
HCAQ6173
Nut , M2.5, Galvanized Steel (10 pcs)
HCAQ6104
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6135
Set M3X12 screw, Steel (10 pcs)
HCAQ6174
Nut , M3, Galvanized Steel (10 pcs)
HCAQ6105
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6136
Set M3X16 screw, Steel (10 pcs)
HCAQ6175
Nut , M4, Galvanized Steel (10 pcs)
Socket head screw, M2X20, Steel (10 pcs)
HCAQ6106
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6137
Set M4X4 screw, Steel (10 pcs)
HCAQ6176
Nut , M5, Galvanized Steel (10 pcs)
Socket head screw, M2,5X4, Steel (10 pcs)
HCAQ6107
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6138
Set M4X6 screw, Steel (10 pcs)
HCAQ6177
Nut , M6, Galvanized Steel (10 pcs)
HCAQ6008
Socket head screw, M2,5X6, Steel (10 pcs)
HCAQ6108
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6139
Set M4X8 screw, Steel (10 pcs)
HCAQ6009
Socket head screw, M2,5X8, Steel (10 pcs)
HCAQ6109
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6140
Set M4X10 screw, Steel (10 pcs)
HCAQ6010
Socket head screw, M2,5X10, Steel (10 pcs)
HCAQ6110
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6011
Socket head screw, M2,5X12, Steel (10 pcs)
HCAQ6012
Order no.
HCAQ6101
Description
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6102
HCAQ6103
Socket head screw, M2X14, Steel (10 pcs)
Socket head screw, M2X16, Steel (10 pcs)
HCAQ6006
HCAQ6007
Order no.
HCAQ6001
Description
Socket head screw, M2X8, Steel (10 pcs)
HCAQ6002
Socket head screw, M2X10, Steel (10 pcs)
HCAQ6003
Socket head screw, M2X12, Steel (10 pcs)
HCAQ6004
HCAQ6005
Socket head countersunk screw
HCAQ6141
Set M4X12 screw, Steel (10 pcs)
Description
Socket head M3X6 countersunk screw,Steel (10 pcs)
HCAQ6111
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6142
Set M4X16 screw, Steel (10 pcs)
Socket head screw, M2,5X14, Steel (10 pcs)
Order no.
HCAQ6061
HCAQ6112
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6143
Set M4X20 screw, Steel (10 pcs)
HCAQ6013
Socket head screw, M2,5X16, Steel (10 pcs)
HCAQ6062
Socket head M3X8 countersunk screw,Steel (10 pcs)
HCAQ6113
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6144
Set M5X5 screw, Steel (10 pcs)
HCAQ6014
Socket head screw, M2,5X20, Steel (10 pcs)
HCAQ6063
Socket head M3X10 countersunk screw,Steel (10 pcs)
HCAQ6114
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6145
Set M5X8 screw, Steel (10 pcs)
HCAQ6015
Socket head screw, M3X6, Steel (10 pcs)
HCAQ6064
Socket head M3X12 countersunk screw,Steel (10 pcs)
HCAQ6115
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6146
Set M5X10 screw, Steel (10 pcs)
HCAQ6116
Socket low M3X6 round head screw,Steel (10 pcs)
HCAQ6016
Socket head screw, M3X8, Steel (10 pcs)
HCAQ6065
Socket head M3X16 countersunk screw,Steel (10 pcs)
HCAQ6147
Set M5X12 screw, Steel (10 pcs)
HCAQ6017
Socket head screw, M3X10, Steel (10 pcs)
HCAQ6066
Socket head M3X20 countersunk screw,Steel (10 pcs)
HCAQ6148
Set M5X16 screw, Steel (10 pcs)
HCAQ6018
Socket head screw, M3X12, Steel (10 pcs)
HCAQ6067
Socket head M3X25 countersunk screw,Steel (10 pcs)
HCAQ6149
Set M5X20 screw, Steel (10 pcs)
HCAQ6019
Socket head screw, M3X16, Steel (10 pcs)
HCAQ6068
Socket head M3X30 countersunk screw,Steel (10 pcs)
HCAQ6020
Socket head screw, M3X20, Steel (10 pcs)
HCAQ6069
Socket head M4X6 countersunk screw,Steel (10 pcs)
HCAQ6021
Socket head screw, M3X25, Steel (10 pcs)
HCAQ6070
Socket head M4X8 countersunk screw,Steel (10 pcs)
HCAQ6022
Socket head screw, M3X30, Steel (10 pcs)
HCAQ6071
Socket head M4X10 countersunk screw,Steel (10 pcs)
HCAQ6023
Socket head screw, M4X6, Steel (10 pcs)
HCAQ6072
Socket head M4X12 countersunk screw,Steel (10 pcs)
HCAQ6024
Socket head screw, M4X8, Steel (10 pcs)
HCAQ6073
Socket head M4X16 countersunk screw,Steel (10 pcs)
HCAQ6025
Socket head screw, M4X10, Steel (10 pcs)
HCAQ6074
Socket head M4X20 countersunk screw,Steel (10 pcs)
HCAQ6026
Socket head screw, M4X12, Steel (10 pcs)
HCAQ6075
Socket head M4X30 countersunk screw,Steel (10 pcs)
HCAQ6027
Socket head screw, M4X16, Steel (10 pcs)
HCAQ6076
Socket head M4X35 countersunk screw,Steel (10 pcs)
HCAQ6028
Socket head screw, M4X20, Steel (10 pcs)
HCAQ6077
Socket head M4X40 countersunk screw,Steel (10 pcs)
HCAQ6029
Socket head screw, M4x25, Steel (10 pcs)
HCAQ6078
Socket head M5X8 countersunk screw,Steel (10 pcs)
HCAQ6030
Socket head screw, M4X30, Steel (10 pcs)
HCAQ6079
Socket head M5X10 countersunk screw,Steel (10 pcs)
HCAQ6031
Socket head screw, M4X35, Steel (10 pcs)
HCAQ6080
Socket head M5X12 countersunk screw,Steel (10 pcs)
HCAQ6032
Socket head screw, M4X40, Steel (10 pcs)
HCAQ6081
Socket head M5X16 countersunk screw,Steel (10 pcs)
HCAQ6033
Socket head screw, M5X6, Steel (10 pcs)
HCAQ6082
Socket head M5X20 countersunk screw,Steel (10 pcs)
HCAQ6034
Socket head screw, M5X8, Steel (10 pcs)
HCAQ6083
Socket head M5X25 countersunk screw,Steel (10 pcs)
HCAQ6035
Socket head screw, M5X10, Steel (10 pcs)
HCAQ6084
Socket head M5X30 countersunk screw,Steel (10 pcs)
Order no.
HCAQ6121
Description
Socket M3X6 low round flanged head screw, Steel (10 pcs)
HCAQ6036
Socket head screw, M5X12, Steel (10 pcs)
HCAQ6085
Socket head M5X40 countersunk screw,Steel (10 pcs)
HCAQ6122
Socket M3X8 low round flanged head screw, Steel (10 pcs)
HCAQ6037
Socket head screw, M5X16, Steel (10 pcs)
HCAQ6123
Socket M3X10 low round flanged head screw, Steel (10 pcs)
HCAQ6038
Socket head screw, M5X20, Steel (10 pcs)
HCAQ6124
Socket M3X12 low round flanged head screw, Steel (10 pcs)
HCAQ6039
Socket head screw, M5X25, Steel (10 pcs)
HCAQ6040
Socket head screw, M5X30, Steel (10 pcs)
Blind nut
Low profile nut
Order no.
HCAQ6221
Description
Washer, M1,6, Galvanized Steel (10 pcs)
HCAQ6222
Washer, M2, Galvanized Steel (10 pcs)
HCAQ6223
Washer, M2,5, Galvanized Steel (10 pcs)
Order no.
HCAQ6191
Description
Low profile nut, M2, Galvanized Steel (10 pcs)
HCAQ6224
Washer, M2,6, Galvanized Steel (10 pcs)
HCAQ6192
Low profile nut, M3, Galvanized Steel (10 pcs)
HCAQ6225
Washer, M3, Galvanized Steel (10 pcs)
HCAQ6193
Low profile nut, M4, Galvanized Steel (10 pcs)
HCAQ6226
Washer, M4, Galvanized Steel (10 pcs)
HCAQ6227
Washer, M5, Galvanized Steel (10 pcs)
HCAQ6228
Washer, M6, Galvanized Steel (10 pcs)
HCAQ6229
Washer, M8, Galvanized Steel (10 pcs)
Nylstop nut
Socket low round flanged head screw
Washer
Locking washer
Order no.
HCAQ6161
Description
Blind nut, M3, Galvanized Steel (5 pcs)
HCAQ6162
Blind nut, M4, Galvanized Steel (5 pcs)
HCAQ6163
Blind nut, M5, Galvanized Steel (5 pcs)
HCAQ6164
Blind nut, M6, Galvanized Steel (5 pcs)
Order no.
HCAQ6201
Description
Nylstop nut, M2, Galvanized Steel (10 pcs)
HCAQ6202
Nylstop nut, M3, Galvanized Steel (10 pcs)
HCAQ6203
Nylstop nut, M4, Galvanized Steel (10 pcs)
HCAQ6204
Nylstop nut, M5, Galvanized Steel (10 pcs)
HCAQ6205
Nylstop nut, M6, Galvanized Steel (10 pcs)
Order no.
HCAQ6241
Description
Locking washer, M2, Galvanized Steel (10 pcs)
HCAQ6242
Locking washer, M3, Galvanized Steel (10 pcs)
HCAQ6243
Locking washer, M4, Galvanized Steel (10 pcs)
65
Nuts and bolts
E-Clip
66
Pan head screw
Countersunk screw
Pan head screw
Self-tapping countersunk screw
Countersunk screw
Order no.
Description
HCAQ6251 E-clips, 1,2mm, Spring Steel (10 pcs)
HCAQ6252 E-clips, 1,5mm, Spring Steel (10 pcs)
HCAQ6253
E-clips, 1,9mm, Spring Steel (10 pcs)
HCAQ6254
E-clips, 2,3mm, Spring Steel (10 pcs)
HCAQ6255
Order no.
HCAQ6331
Description
Countersunk screw, M3X6, Galvanized Steel (10 pcs)
HCAQ6332
Pan head screw, M2X8, Galvanized Steel (10 pcs)
Pan head screw, M2X10, Galvanized Steel (10 pcs)
Countersunk screw, M3X8, Galvanized Steel (10 pcs)
Order no.
HCAQ6561
Description
Pan head screw, M3X10, Nylon (5 pcs)
HCAQ6333
Countersunk screw, M3X10, Galvanized Steel (10 pcs)
HCAQ6562
Pan head screw, M3X12, Nylon (5 pcs)
HCAQ6334
Countersunk screw, M3X12, Galvanized Steel (10 pcs)
HCAQ6563
Pan head screw, M3X16, Nylon (5 pcs)
Pan head screw, M2X20, Galvanized Steel (10 pcs)
HCAQ6335
Countersunk screw, M3X16, Galvanized Steel (10 pcs)
HCAQ6564
Pan head screw, M3X20, Nylon (5 pcs)
HCAQ6305
Pan head screw, M2,5X8, Galvanized Steel (10 pcs)
HCAQ6336
Countersunk screw, M3X20, Galvanized Steel (10 pcs)
HCAQ6565
Pan head screw, M4X10, Nylon (5 pcs)
HCAQ6306
Pan head screw, M2,5X12, Galvanized Steel (10 pcs)
HCAQ6337
Countersunk screw, M3X25, Galvanized Steel (10 pcs)
HCAQ6566
Pan head screw, M4X12, Nylon (5 pcs)
HCAQ6307
Pan head screw, M3X6, Galvanized Steel (10 pcs)
HCAQ6338
Countersunk screw, M3X30, Galvanized Steel (10 pcs)
HCAQ6567
Pan head screw, M4X16, Nylon (5 pcs)
HCAQ6308
Pan head screw, M3X8, Galvanized Steel (10 pcs)
HCAQ6339
Countersunk screw, M4X6, Galvanized Steel (10 pcs)
HCAQ6568
Pan head screw, M4X20, Nylon (5 pcs)
HCAQ6309
Pan head screw, M3X10, Galvanized Steel (10 pcs)
HCAQ6340
Countersunk screw, M4X8, Galvanized Steel (10 pcs)
HCAQ6569
Pan head screw, M4X30, Nylon (5 pcs)
HCAQ6310
Pan head screw, M3X12, Galvanized Steel (10 pcs)
HCAQ6341
Countersunk screw, M4X10, Galvanized Steel (10 pcs)
HCAQ6570
Pan head screw, M5X10, Nylon (5 pcs)
HCAQ6311
Pan head screw, M3X16, Galvanized Steel (10 pcs)
HCAQ6342
Countersunk screw, M4X12, Galvanized Steel (10 pcs)
HCAQ6571
Pan head screw, M5X16, Nylon (5 pcs)
HCAQ6312
Pan head screw, M3X20, Galvanized Steel (10 pcs)
HCAQ6343
Countersunk screw, M4X16, Galvanized Steel (10 pcs)
HCAQ6572
Pan head screw, M5X20, Nylon (5 pcs)
HCAQ6313
Pan head screw, M3X25, Galvanized Steel (10 pcs)
HCAQ6344
Countersunk screw, M4X20, Galvanized Steel (10 pcs)
HCAQ6573
Pan head screw, M5X30, Nylon (5 pcs)
HCAQ6314
Pan head screw, M3X30, Galvanized Steel (10 pcs)
HCAQ6345
Countersunk screw, M4X25, Galvanized Steel (10 pcs)
HCAQ6574
Pan head screw, M6X30, Nylon (5 pcs)
HCAQ6315
Pan head screw, M4X6, Galvanized Steel (10 pcs)
HCAQ6346
Countersunk screw, M4X30, Galvanized Steel (10 pcs)
HCAQ6575
Pan head screw, M6X40, Nylon (5 pcs)
HCAQ6316
Pan head screw, M4X8, Galvanized Steel (10 pcs)
HCAQ6317
Pan head screw, M4X10, Galvanized Steel (10 pcs)
E-clips, 3,2mm, Spring Steel (10 pcs)
Order no.
HCAQ6301
Description
Pan head screw, M2X6, Galvanized Steel (10 pcs)
HCAQ6256
E-clips, 4mm, Spring Steel (10 pcs)
HCAQ6302
HCAQ6257
E-clips, 5mm, Spring Steel (10 pcs)
HCAQ6303
HCAQ6258
E-clips, 6mm, Spring Steel (10 pcs)
HCAQ6304
HCAQ6259
E-clips, 7mm, Spring Steel (10 pcs)
Thread rod
Order no.
HCAQ6371
HCAQ6372
HCAQ6373
HCAQ6374
HCAQ6375
HCAQ6376
HCAQ6377
HCAQ6378
HCAQ6379
HCAQ6380
HCAQ6381
HCAQ6382
HCAQ6383
Description
Self-tapping 2,9X6,5 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 2,9X9,5 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 2,9X13 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 2,9X16 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 2,9X19 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 3,5X9,5 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 3,5X13 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 3,5X16 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 3,5X19 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 3,5X25 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 3,5X32 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 4,2X13 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 4,2X16 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 4,2X19 countersunk screw, Galvanized Steel
(10 pcs)
Self-tapping 4,2X25 countersunk screw, Galvanized Steel
(10 pcs)
Order no.
HCAQ6581
Description
Countersunk screw, M3X10, Nylon (5 pcs)
HCAQ6582
Countersunk screw, M3X12, Nylon (5 pcs)
HCAQ6583
Countersunk screw, M3X16, Nylon (5 pcs)
HCAQ6584
Countersunk screw, M3X20, Nylon (5 pcs)
HCAQ6585
Countersunk screw, M4X10, Nylon (5 pcs)
HCAQ6586
Countersunk screw, M4X12, Nylon (5 pcs)
HCAQ6587
Countersunk screw, M4X16, Nylon (5 pcs)
HCAQ6588
Countersunk screw, M4X20, Nylon (5 pcs)
HCAQ6589
Countersunk screw, M4X30, Nylon (5 pcs)
HCAQ6590
Countersunk screw, M5X10, Nylon (5 pcs)
HCAQ6591
Countersunk screw, M5X16, Nylon (5 pcs)
HCAQ6592
Countersunk screw, M5X20, Nylon (5 pcs)
HCAQ6593
Countersunk screw, M5X30, Nylon (5 pcs)
HCAQ6594
Countersunk screw, M6X30, Nylon (5 pcs)
HCAQ6595
Countersunk screw, M6X40, Nylon (5 pcs)
Wing nut, Nylon
Order no.
HCAQ6271
Description
Thread rod, M3X20, Steel (5 pcs)
HCAQ6318
Pan head screw, M4X12, Galvanized Steel (10 pcs)
HCAQ6319
Pan head screw, M4X16, Galvanized Steel (10 pcs)
HCAQ6272
Thread rod, M3X30, Steel (5 pcs)
HCAQ6320
Pan head screw, M4X20, Galvanized Steel (10 pcs)
HCAQ6273
Thread rod, M3X40, Steel (5 pcs)
HCAQ6321
Pan head screw, M4X25, Galvanized Steel (10 pcs)
HCAQ6274
Thread rod, M3X50, Steel (5 pcs)
HCAQ6322
Pan head screw, M4X30, Galvanized Steel (10 pcs)
HCAQ6275
Thread rod, M3X60, Steel (5 pcs)
HCAQ6276
Thread rod, M3X70, Steel (5 pcs)
HCAQ6277
Thread rod, M4X20, Steel (5 pcs)
HCAQ6278
Thread rod, M4X30, Steel (5 pcs)
HCAQ6279
Thread rod, M4X40, Steel (5 pcs)
Order no.
HCAQ6551
Description
Wing nut, M4, Nylon (2 pcs)
HCAQ6280
Thread rod, M4X50, Steel (5 pcs)
HCAQ6552
Wing nut, M5, Nylon (2 pcs)
HCAQ6281
Thread rod, M4X60, Steel (5 pcs)
HCAQ6553
Wing nut, M6, Nylon (2 pcs)
HCAQ6282
Thread rod, M4X70, Steel (5 pcs)
HCAQ6384
HCAQ6385
Nut, Nylon
Order no.
HCAQ6541
Description
Nut, M3, Nylon (10 pcs)
HCAQ6542
Nut, M4, Nylon (10 pcs)
HCAQ6543
Nut, M5, Nylon (10 pcs)
HCAQ6544
Nut, M6, Nylon (10 pcs)
67
Self-tapping pan head screw
Socket head screw, stainless
Nuts and bolts
stainless
Order no.
HCAQ6351
Description
Self-tapping 2,9X6,5 pan head screw, Galvanized Steel (10 pcs)
HCAQ6352
Self-tapping 2,9X9,5 pan head screw, Galvanized Steel (10 pcs)
HCAQ6353
Self-tapping 2,9X13 pan head screw, Galvanized Steel (10 pcs)
HCAQ6354
Self-tapping 2,9X16 pan head screw, Galvanized Steel (10 pcs)
HCAQ6355
Self-tapping 2,9X19 pan head screw, Galvanized Steel (10 pcs)
HCAQ6356
Self-tapping 3,5X6,5 pan head screw, Galvanized Steel (10 pcs)
HCAQ6357
Self-tapping 3,5X9,5 pan head screw, Galvanized Steel (10 pcs)
HCAQ6358
Self-tapping 3,5X13 pan head screw, Galvanized Steel (10 pcs)
HCAQ6359
Self-tapping 3,5X16 pan head screw, Galvanized Steel (10 pcs)
HCAQ6360
Self-tapping 3,5X19 pan head screw, Galvanized Steel (10 pcs)
HCAQ6361
Self-tapping 3,5X25 pan head screw, Galvanized Steel (10 pcs)
HCAQ6362
Self-tapping 3,5X32 pan head screw, Galvanized Steel (10 pcs)
HCAQ6363
Self-tapping 4,2X13 pan head screw, Galvanized Steel (10 pcs)
HCAQ6364
Self-tapping 4,2X16 pan head screw, Galvanized Steel (10 pcs)
HCAQ6365
Self-tapping 4,2X19 pan head screw, Galvanized Steel (10 pcs)
HCAQ6366
Self-tapping 4,2X25 pan head screw, Galvanized Steel (10 pcs)
Socket low round head screw, stainless
Order no.
HCAQ6405
Description
Socket head screw, M3X6, Stainless (10 pcs)
HCAQ6406
Socket head screw, M3X8, Stainless (10 pcs)
HCAQ6407
Socket head screw, M3X10, Stainless (10 pcs)
HCAQ6408
Socket head screw, M3X12, Stainless (10 pcs)
HCAQ6409
Socket head screw, M3X16, Stainless (10 pcs)
HCAQ6410
Socket head screw, M3X20, Stainless (10 pcs)
HCAQ6411
Socket head screw, M3X25, Stainless (10 pcs)
HCAQ6412
Socket head screw, M3X30, Stainless (10 pcs)
HCAQ6413
Socket head screw, M4X6, Stainless (10 pcs)
HCAQ6414
Socket head screw, M4X8, Stainless (10 pcs)
HCAQ6415
Socket head screw, M4X10, Stainless (10 pcs)
HCAQ6437
HCAQ6416
Socket head screw, M4X12, Stainless (10 pcs)
HCAQ6438
HCAQ6417
Socket head screw, M4X16, Stainless (10 pcs)
HCAQ6418
Socket head screw, M4X20, Stainless (10 pcs)
HCAQ6419
Socket head screw, M4x25, Stainless (10 pcs)
HCAQ6420
Socket head screw, M4X30, Stainless (10 pcs)
Order no.
HCAQ6431
HCAQ6432
HCAQ6433
HCAQ6434
HCAQ6435
HCAQ6436
HCAQ6439
HCAQ6440
HCAQ6441
Self-tapping pan head screw, stainless
stainless
HCAQ6442
HCAQ6443
HCAQ6444
HCAQ6445
Self-tapping countersunk screw, stainless
stainless
stainless
Description
Socket M3X6, low round head screw, Stainless
(10 pcs)
Socket M3X8, low round head screw, Stainless
(10 pcs)
Socket M3X10, low round head screw, Stainless
(10 pcs)
Socket M3X12, low round head screw, Stainless
(10 pcs)
Socket M3X16, low round head screw, Stainless
(10 pcs)
Socket M3X20, low round head screw, Stainless
(10 pcs)
Socket M3X25, low round head screw, Stainless
(10 pcs)
Socket M4X6, low round head screw, Stainless
(10 pcs)
Socket M4X8, low round head screw, Stainless
(10 pcs)
Socket M4X10, low round head screw, Stainless
(10 pcs)
Socket M4X12, low round head screw, Stainless
(10 pcs)
Socket M4X16, low round head screw, Stainless
(10 pcs)
Socket M4X20, low round head screw, Stainless
(10 pcs)
Socket M4x25, low round head screw, Stainless
(10 pcs)
Socket M4X30, low round head screw, Stainless
(10 pcs)
stainless
68
Description
Self-tapping 2,9X6,5, pan head screw, Stainless (10 pcs)
HCAQ6502
Self-tapping 2,9X9,5, pan head screw, Stainless (10 pcs)
HCAQ6503
Self-tapping 2,9X13, pan head screw, Stainless (10 pcs)
HCAQ6504
Self-tapping 2,9X16, pan head screw, Stainless (10 pcs)
HCAQ6505
Self-tapping 2,9X19, pan head screw, Stainless (10 pcs)
HCAQ6506
Self-tapping 3,5X6,5, pan head screw, Stainless (10 pcs)
HCAQ6507
Self-tapping 3,5X9,5, pan head screw, Stainless (10 pcs)
HCAQ6508
Self-tapping 3,5X13, pan head screw, Stainless (10 pcs)
HCAQ6509
Self-tapping 3,5X16, pan head screw, Stainless (10 pcs)
HCAQ6510
Self-tapping 3,5X19, pan head screw, Stainless (10 pcs)
HCAQ6511
Nylstop nut, Aluminium
ALUMINIUM
Order no.
HCAQ6451
Description
Set screw, M3X3, Stainless (10 pcs)
Order no.
HCAQ6521
Description
Self-tapping 2,9X9,5, countersunk screw, Stainless (10 pcs)
HCAQ6452
Set screw, M3X5, Stainless (10 pcs)
HCAQ6454
Set screw, M5X5, Stainless (10 pcs)
Order no.
HCAQ6620
Description
Nylstop nut M2 "Gold", Aluminium (10 pcs)
HCAQ6522
Self-tapping 2,9X13, countersunk screw, Stainless (10 pcs)
HCAQ6455
Set screw, M5X8, Stainless (10 pcs)
HCAQ6621
Nylstop nut M2 "Green", Aluminium (10 pcs)
HCAQ6523
Self-tapping 2,9X16, countersunk screw, Stainless (10 pcs)
HCAQ6457
Set screw, M4X4, Stainless (10 pcs)
HCAQ6622
Nylstop nut M2 "Purple", Aluminium (10 pcs)
HCAQ6524
Self-tapping 2,9X19, countersunk screw, Stainless (10 pcs)
HCAQ6458
Set screw, M4X6, Stainless (10 pcs)
HCAQ6623
Nylstop nut M2 "Gun Metal", Aluminium (10 pcs)
HCAQ6525
Self-tapping 3,5X9,5, countersunk screw, Stainless (10 pcs)
HCAQ6459
Set screw, M4X8, Stainless (10 pcs)
HCAQ6624
Nylstop nut M2 "Blue", Aluminium (10 pcs)
HCAQ6526
Self-tapping 3,5X13, countersunk screw, Stainless (10 pcs)
HCAQ6625
Nylstop nut M2 "Red", Aluminium (10 pcs)
HCAQ6527
Self-tapping 3,5X16, countersunk screw, Stainless (10 pcs)
HCAQ6630
Nylstop nut M3 "Gold", Aluminium (10 pcs)
HCAQ6528
Self-tapping 3,5X19, countersunk screw, Stainless (10 pcs)
HCAQ6631
Nylstop nut M3 "Green", Aluminium (10 pcs)
HCAQ6529
Self-tapping 3,5X25, countersunk screw, Stainless (10 pcs)
HCAQ6632
Nylstop nut M3 "Purple", Aluminium (10 pcs)
HCAQ6530
Self-tapping 4,2X13, countersunk screw, Stainless (10 pcs)
HCAQ6633
Nylstop nut M3 "Gun Metal", Aluminium (10 pcs)
HCAQ6531
Self-tapping 4,2X16, countersunk screw, Stainless (10 pcs)
HCAQ6634
Nylstop nut M3 Blue", Aluminium (10 pcs)
HCAQ6532
Self-tapping 4,2X19, countersunk screw, Stainless (10 pcs)
HCAQ6635
Nylstop nut M3 "Red", Aluminium (10 pcs)
HCAQ6533
Self-tapping 4,2X25, countersunk screw, Stainless (10 pcs)
HCAQ6640
Nylstop nut M4 "Gold", Aluminium (10 pcs)
HCAQ6641
Nylstop nut M4 "Green", Aluminium (10 pcs)
HCAQ6642
Nylstop nut M4 "Purple", Aluminium (10 pcs)
HCAQ6643
Nylstop nut M4 "Gun Metal", Aluminium (10 pcs)
HCAQ6644
Nylstop nut M4 "Blue", Aluminium (10 pcs)
HCAQ6645
Nylstop nut M4 "Red", Aluminium (10 pcs)
HCAQ6650
Nylstop nut M5 "Gold", Aluminium (10 pcs)
HCAQ6651
Nylstop nut M5 "Green", Aluminium (10 pcs)
HCAQ6652
Nylstop nut M5 "Purple", Aluminium (10 pcs)
HCAQ6653
Nylstop nut M5 "Gun Metal", Aluminium (10 pcs)
HCAQ6654
Nylstop nut M5 "Blue", Aluminium (10 pcs)
HCAQ6655
Nylstop nut M5 "Red", Aluminium (10 pcs)
Nut, stainless
stainless
Nylstop nut, stainless
stainless
Closed round head nut, stainless
Order no.
HCAQ6501
Set screw, stainless
Order no.
HCAQ6461
Description
Nut, M2, Stainless (10 pcs)
HCAQ6462
Nut, M2,5, Stainless (10 pcs)
HCAQ6463
Nut, M3, Stainless (10 pcs)
HCAQ6464
Nut, M4, Stainless (10 pcs)
HCAQ6465
Nut, M5, Stainless (10 pcs)
HCAQ6466
Nut, M6, Stainless (10 pcs)
Washer, stainless
stainless
stainless
Order no.
HCAQ6471
Description
Nylstop nut, M3, Stainless (10 pcs)
HCAQ6472
Nylstop nut, M4, Stainless (10 pcs)
HCAQ6473
Nylstop nut, M5, Stainless (10 pcs)
HCAQ6474
Nylstop nut, M6, Stainless (10 pcs)
Order no.
HCAQ6491
Description
Washer, M1,6, Stainless (10 pcs)
HCAQ6492
Washer, M2, Stainless (10 pcs)
HCAQ6493
Washer, M2,5, Stainless (10 pcs)
Self-tapping 3,5X25, pan head screw, Stainless (10 pcs)
HCAQ6494
Washer, M3, Stainless (10 pcs)
HCAQ6512
Self-tapping 4,2X13, pan head screw, Stainless (10 pcs)
HCAQ6495
Washer, M4, Stainless (10 pcs)
HCAQ6513
Self-tapping 4,2X16, pan head screw, Stainless (10 pcs)
HCAQ6496
Washer, M5, Stainless (10 pcs)
HCAQ6514
Self-tapping 4,2X19, pan head screw, Stainless (10 pcs)
HCAQ6497
Washer, M6, Stainless (10 pcs)
HCAQ6515
Self-tapping 4,2X25, pan head screw, Stainless (10 pcs)
HCAQ6498
Washer, M8, Stainless (10 pcs)
Order no.
HCAQ6481
Description
Closed round head nut, M3, Stainless (10 pcs)
HCAQ6482
Closed round head nut, M4, Stainless (10 pcs)
69
Washer for countersunk screws, Aluminium
ALUMINIUM
Flanged nylstop nut, Aluminium
Chrome ball bearing „ABEC 3“, rubber shielded
ALUMINIUM
Order no.
HCAQ6827
HCAQ6828
HCAQ6829
HCAQ6830
Description
Chrome Ball 15X28X7 - 6902-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 17X30X7 - MR6903-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 20X32X7 - MR6804-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 1/2X3/4X5/32 - R1212-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome ball bearing „ABEC 3“, metal shielded
Order no.
Description
HCAQ6888
Chrome Ball 8X14X4 - MR148ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 8X16X5 - MR688ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 9X17X5 - MR689ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 10X19X5 - MR6800ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 17X26X5 - MR6803ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
HCAQ6889
HCAQ6890
HCAQ6891
HCAQ6892
Order no.
HCAQ6730
HCAQ6731
HCAQ6732
HCAQ6733
HCAQ6734
HCAQ6735
HCAQ6740
HCAQ6741
HCAQ6742
HCAQ6743
HCAQ6744
HCAQ6745
HCAQ6750
HCAQ6751
HCAQ6752
HCAQ6753
HCAQ6754
HCAQ6755
Description
Washer M3 "Gold" for countersunk screws, Aluminium
(10 pcs)
Washer M3 "Green" for countersunk screws, Aluminium
(10 pcs)
Washer M3 "Purple" for countersunk screws, Aluminium
(10 pcs)
Washer M3 "Gun Metal" for countersunk screws, Aluminium
(10 pcs)
Washer M3 "Blue" for countersunk screws, Aluminium
(10 pcs)
Washer M3 "Red" for countersunk screws, Aluminium
(10 pcs)
Washer M4 "Gold" for countersunk screws, Aluminium
(10 pcs)
Washer M4 "Green" for countersunk screws, Aluminium
(10 pcs)
Washer M4 "Purple" for countersunk screws, Aluminium
(10 pcs)
Washer M4 "Gun Metal" for countersunk screws, Aluminium
(10 pcs)
Washer M4 "Blue" for countersunk screws, Aluminium
(10 pcs)
Washer M4 "Red" for countersunk screws, Aluminium
(10 pcs)
Washer M5 "Gold" for countersunk screws, Aluminium
(10 pcs)
Washer M5 "Green" for countersunk screws, Aluminium
(10 pcs)
Washer M5 "Purple" for countersunk screws, Aluminium
(10 pcs)
Washer M5 "Gun Metal" for countersunk screws, Aluminium
(10 pcs)
Washer M5 "Blue" for countersunk screws, Aluminium
(10 pcs)
Washer M5 "Red" for countersunk screws, Aluminium
(10 pcs)
Order no.
HCAQ6670
Description
Flanged nylstop nut M3 "Gold", Aluminium (10 pcs)
HCAQ6671
Flanged nylstop nut M3 "Green", Aluminium (10 pcs)
HCAQ6672
Flanged nylstop nut M3 "Purple", Aluminium (10 pcs)
HCAQ6673
Flanged nylstop nut M3 "Gun Metal", Aluminium (10 pcs)
HCAQ6674
Flanged nylstop nut M3 "Blue", Aluminium (10 pcs)
HCAQ6675
Flanged nylstop nut M3 "Red", Aluminium (10 pcs)
HCAQ6680
Flanged nylstop nut M4 "Gold", Aluminium (10 pcs)
HCAQ6681
Flanged nylstop nut M4 "Green", Aluminium (10 pcs)
HCAQ6682
Flanged nylstop nut M4 "Purple", Aluminium (10 pcs)
HCAQ6683
Flanged nylstop nut M4 "Gun Metal", Aluminium (10 pcs)
HCAQ6684
Flanged nylstop nut M4 "Blue", Aluminium (10 pcs)
HCAQ6685
Flanged nylstop nut M4 "Red", Aluminium (10 pcs)
HCAQ6690
Flanged nylstop nut M5 "Gold", Aluminium (10 pcs)
HCAQ6691
Flanged nylstop nut M5 "Green", Aluminium (10 pcs)
HCAQ6692
Flanged nylstop nut M5 "Purple", Aluminium (10 pcs)
HCAQ6693
Flanged nylstop nut M5 "Gun Metal", Aluminium (10 pcs)
HCAQ6694
Flanged nylstop nut M5 "Blue", Aluminium (10 pcs)
HCAQ6695
Flanged nylstop nut M5 "Red", Aluminium (10 pcs)
Order no.
HCAQ6801
Ball bearings
Nuts and bolts
Ceramic ball bearing „ABEC 3“, rubber shielded
HCAQ6802
HCAQ6803
HCAQ6804
HCAQ6805
HCAQ6806
HCAQ6807
HCAQ6808
HCAQ6809
HCAQ6810
HCAQ6811
HCAQ6812
HCAQ6813
HCAQ6814
HCAQ6815
HCAQ6816
HCAQ6817
HCAQ6818
HCAQ6819
HCAQ6820
HCAQ6821
HCAQ6822
HCAQ6823
HCAQ6824
HCAQ6825
HCAQ6826
70
Description
Chrome Ball 3X6X2 - MR63, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 4X7X2,5 - MR74-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 4X8X3 - MR84-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 5X10X4 - MR105-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 5X8X2,5 - MR85-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 5X11X4 - MR115-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 5X12X4 - MR125-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 5X13X4 - 695-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 6X10X3 - MR106-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 6X12X4 - MR126-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 6X13X5 - 686-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 6X19X6 - 626-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 8X12X3,5 - MR128-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 8X14X4 - MR148-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 8X16X5 - 688-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 8X22X7 - 608-2RS, (4 pcs) Bearing "ABEC 3",
rubber shielded
Chrome Ball 10X15X4 - 6700-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 10X16X4 - MR1016-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 10X19X7 - MR1910-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 10X22X6 - 6900-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 12X18X4 - 6701-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 12X21X5 - 6801-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 12X24X6 - 6901-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 12X28X8 - 6001-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 13X19X4 - MR1913-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 15X21X4 - MR6702-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Order no.
HCAQ6861
HCAQ6862
HCAQ6863
HCAQ6864
HCAQ6865
Order no.
HCAQ6851
HCAQ6852
HCAQ6853
HCAQ6854
Description
Ceramic Ball 5X10X4C - MR105-2RS/C, (2 pcs) l Bearing
"ABEC 3", Rubber Shielded
Ceramic Ball 5X8X2,5C - MR85-2RS/C, (2 pcs) l Bearing "ABEC 3",
Rubber Shielded
Ceramic Ball 5X11X4C - MR115-2RS/C, (2 pcs) l Bearing
"ABEC 3", Rubber Shielded
Ceramic Ball 5X13X4C - 695-2RS/C, (2 pcs) l Bearing "ABEC 3",
Rubber Shielded
HCAQ6866
HCAQ6867
HCAQ6868
HCAQ6869
HCAQ6870
HCAQ6871
Chrome ball bearing „ABEC 3“, flanged, rubber shielded
HCAQ6872
HCAQ6873
HCAQ6874
HCAQ6875
HCAQ6876
Order no.
HCAQ6841
HCAQ6842
HCAQ6843
HCAQ6844
HCAQ6845
Description
Chrome Ball 4X8X3 Flanged - MF84-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 5X10X4 Flanged - MF105-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 5X8X2,5 Flanged - MF85-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 6X10X3 Flanged - MF106-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
Chrome Ball 8X14X4 Flanged - MF148-2RS, (4 pcs) Bearing
"ABEC 3", rubber shielded
HCAQ6877
HCAQ6878
HCAQ6879
HCAQ6880
HCAQ6881
HCAQ6882
HCAQ6883
HCAQ6884
HCAQ6885
HCAQ6886
HCAQ6887
Description
Chrome Ball 1,5X4X1,2 - X-MR681X/W1.12, (2 pcs) Bearing
"ABEC 3", metal shielded
Chrome Ball 1,5X4X2 - MR681XZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 2X5X2,5 - MR52ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 2X6X2,3 - MR62ZZ/W23, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 2X6X2,5 - MR62ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 2X6X3 - MR692ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 2,5X6X2,6 - MR682X-ZZ #3, (2 pcs) Bearing
"ABEC 3", metal shielded
Chrome Ball 3X6X2,5 - MR63ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 3X7X2 - MR683, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 3X7X3 - MR73ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 3X8X3 - MR83ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 3X8X4 - MR693ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 3X10X4 - MR103ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded ,
Chrome Ball 4X7X2,5 - MR74, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 4X7X2,5 - MR74ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 4X8X3 - MR84ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 4X9X4 - MR684ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 4X10X4 - MR104ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 4X11X4 - MR694ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 4X13X5 - MR624ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 5X8X2,5 - MR85ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 5X9X3 - MR95ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 5X10X4 - MR105ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 5X11X5 - MR685ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 6X10X3 - MR106, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 6X12X3 - MR126, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 6X12X4 - MR126ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome ball bearing „ABEC 3“, flanged, metal shielded
Order no.
HCAQ6901
HCAQ6902
HCAQ6903
Description
Chrome Ball 2X5X1,5 Flanged - MF52, (2 pcs) Bearing "ABEC 3",
metal shielded
Chrome Ball 2X5X2,3 Flanged - MF682ZZ, (2 pcs) Bearing
"ABEC 3", metal shielded
Chrome Ball 3X7X3 Flanged - MF73ZZ, (2 pcs) Bearing "ABEC 3",
metal shielded
Thrust bearing „ABEC 3“
Order no.
HCAQ6911
Description
Thrust Bearing 3X8X3,5 - F3-8G, "ABEC 3", (2 pcs)
HCAQ6912
Thrust Bearing 5X12X4 - F5-12G, "ABEC 3", (2 pcs)
HCAQ6913
Thrust Bearing 6X14X5 - F6-14G, "ABEC 3", (2 pcs)
HCAQ6914
Thrust Bearing 8X16X5 - F8-16G, "ABEC 3", (2 pcs)
One way bearing „ABEC 3“
Order no.
HCAQ6921
Description
One Way Bearing 6X10X12 - HF0612, "ABEC 3", (1 pc)
HCAQ6922
One Way Bearing 12X18X16 - HF1216, "ABEC 3", (1 pc)
71
Adhesive & accessories
PRO CA
GreatPlanes PRO CA instant adhesive is specially adapted to modelling
requirements, and is excellent for use with most materials commonly
found in modelmaking. PRO CA is available as low, medium, or high
viscosity adhesive, providing the best possible bond for each particular
application.
PRO CA is not suitable for bonding foam components. For this application we recommend using Great Planes PRO Foam Safe CA!
PRO Foam Safe CA
GreatPlanes PRO Foam Safe CA is the ideal instant adhesive for working
with foam components. Whether building, or making field repairs, this
adhesive is exactly the right choice. Depending upon the requirements,
choose between medium, or high viscosity.
PRO CA Activator
PRO Threadlocker
GreatPlanes PRO Threadlocker is an optimal means of locking threads.
It is non-permanent, meaning that locked threads can be loosened
when required, and then re-locked.
PRO Threadlocker
Microballoons
Microballoons are excellent for thickening Epoxy adhesives, in order to
create a permanent durable gap-filling bond using EPOXY adhesive.
Microballoons filler
Instant adhesive PRO Foam Safe CA+ medium
Order no.
GPMR6060
Order no.
GPMR6069
Order no.
GPMR6002
Description
PRO CA Thin 1 oz. (28,3 g)
EPOXY Brushes
The EPOXY brushes are especially shaped for use with EPOXY
adhesives.
EPOXY Brushes
Instant adhesive PRO CA thin
Description
PRO Foam Safe CA+ Medium 0.7 oz. (20 g)
Instant adhesive PRO Foam Safe CA thick
Instant adhesive PRO CA+ medium
Order no.
GPMR6034
Description
Activator for instant adhesives (113 g)
Pro CA Tips
Use these flexible GreatPlanes Pro CA Tips to get your adhesive into
those hard-to-reach places. In addition, the tips prevent leakage and
protect the adhesive againt drying out in the spout of the bottle. They
will fit on most commonly available instant adhesive bottles.
Description
PRO Threadlocker 0.11 oz. (3 g)
EPOXY
GreatPlanes PRO EPOXY is very easy to use, and cures to a garanteed
tough joint, which will also bond differing materials, such as fibreglass,
carbonfibre, metal, wood, and different plastics
PRO Epoxy
Order no.
TOPR1090
Description
Microballoons Filler – 8 oz. (225 g)
EPOXY Mixing Sticks und Mixing Cups
Use GreatPlanes EPOXY mixing sticks and mixing cups to make up
small batches of EPOXY adhesive.
EPOXY Mixing sticks
Order no.
GPMR8060
Description
3/8" Disposable (6 pcs)
GPMR8062
Epoxy Brushes Bulk (144 pcs)
Fibreglass Matting
20 g fibreglass mats are especially well suited for covering whole
components or modules with a fibreglass coat.
60 g fibreglass mats are especially well suited for laminating, or
for example, permanently reinforcing formers or compartments in
fuselage interiors.
140 g fibreglass mats are perfect for wing reinforcement, providing
maximum strength, and are also ideal for the production of fibreglass
components.
Fibreglass matting
PRO CA Tips for instant adhesives
Order no.
GPMR6072
Order no.
GPMR6008
Description
PRO CA+ Medium 1 oz. (28,3 g)
Instant adhesive PRO CA thick
Description
PRO Foam Safe CA Thick 0.7 oz. (20 g)
Order no.
GPMR6014
Order no.
GPMR8055
PRO Debonder
GreatPlanes Pro Debonder is the best cleaner for instant adhesive. It will
remove residue adhesive, and is ideal for pre-cleaning of the parts to be
bonded. Not suitable for foam components.
PRO Debonder - dissolver for instant adhesives
Order no.
GPMR6033
Description
PRO CA Tips
Description
Epoxy Mixing Sticks (50 pcs)
Order no.
GPMR6042
Description
6-Minute Epoxy - 4 oz. (100g)
GPMR6045
6-Minute Epoxy - 9 oz. (250 g)
GPMR6043
30-Minute Epoxy - 4 oz. (100 g)
Order no.
HCAR5000
Description
Fibreglass cloth 3/4 OZ (20 g) 1 sq yd
GPMR6047
30-Minute Epoxy - 4 oz. (250 g)
HCAR5010
Fibreglass cloth 2 OZ (60 g) 1 sq yd
HCAR5025
Fibreglass cloth 5 OZ 140 g) 1 sq yd
EPOXY Mixing cups
Description
PRO CA Thick 1 oz. (28,3 g)
Order no.
GPMR6039
72
PRO CA Activator
GreatPlanes PRO CA Activator accelerates the curing of the adhesive
enormously, thus simplifying the bonding of materials and components.
Description
PRO Debonder 1 oz. (28.4 g)
Order no.
GPMR8056
Description
Mixing Cups (50 pcs)
73
Carbon fiber rods
Order no.
GPMR7700
Description
Carbon Fiber Rod 0.02 x 23,6 in (2)
GPMR7710
Carbon Fiber Rod 0.03 x 23,6 in (2)
GPMR7720
Carbon Fiber Rod 0.04 x 23,6 in (2)
GPMR7730
Carbon Fiber Rod 0.05 x 23,6 in (2)
GPMR7740
Carbon Fiber Rod 0.06 x 23,6 in (2)
GPMR7745
Carbon Fiber Rod 0.06 x 39.4 in
GPMR775
Carbon Fiber Rod 0.07 x 23,6 in (2)
GPMR7755
Carbon Fiber Rod 0.07 x 39.4 in
GPMR7760
Carbon Fiber Rod 0.08 x 23,6 in (2)
GPMR7765
Carbon Fiber Rod 0.08 x 39.4 in
GPMR7770
Carbon Fiber Rod 0.10 x 23,6 in (2)
GPMR7780
Carbon Fiber Rod 0.11 x 23,6 in (2)
GPMR7790
Carbon Fiber Rod 0.12 x 23,6 in (2)
GPMR7795
Carbon Fiber Rod 0.12 x 39.4 in
Carbon fiber
Sheets/Rods/Tubes/Strips
Carbon fiber sheet
74
Carbon fiber tubes
Control surface
deflection
gauge
Order no.: GPMR2405
Power Point
Magnetic balancer
Order no.: TOPQ5700
C.G. Machine (centre
of gravity balance)
Order no.: GPMR2400
The TOP-FLITE Power Point Magnetic Balancer makes it easy to
balance airscrews, impelllers, marine propellers, wheel rims,
couplings, etc., etc. The balancing shaft is mounted frictionlessly, using two strong magnets, garanteeing highest balancing
precision.
Correct adjustment of a model’s centre of gravity is especially
important, and can decide between success or failure when
attempting to fly the model. A well-adjusted C.G. will improve
a model’s flight behaviour considerably. The Great Planes C.G.
Machine enables effortless and precise balancing of the centre of
gravity with models weighing up to 20 kg. The balance supports
are laterally adjustable to accommodate varying fuselage widths.
Using the GreatPlanes ACCU THROW deflection gauge makes it
easy to check, measure, or adjust control surface throws. The
risk of negatively influencing flight behaviour through incorrect
settings of ailerons, elevator, flaps, or rudder, is minimised, so that
using the ACCU THROW gauge also helps to operate the model
aircraft safely.
Precision hinge
slot marker
Order no.: GPMR4005
Precision
Z-bend pliers
Order no.: GPMR8025
Dead center
hole locator
Order no.: GPMR8130
This simple aid enables precise and clear marking
of the position of hinge slots in leading and trailing
edges.
With precision Z-bend pliers, accurate cropping of steel and iron
wire to form control linkages is made easy.
This practical tool helps transfer and mark the positions of holes
in difficult situations. For example, mounting holes in the motor
can be quickly and simply transferred and marked on the motor
bearer, garanteeing a perfect fit.
Tools
and useful aids
Carbon fiber strips
Order no.
GPMR7600
Description
Carbon Fiber Sheet 0.02 x 7.9 x 11.8 in
Order no.
GPMR7800
Description
Carbon Fiber Tubes 0.02 x 0.12 x 23,6 in
Order no.
GPMR7900
Description
Carbon Fiber Strips 0.02 x 0.12 x 23,6 in (2)
GPMR7610
Carbon Fiber Sheet 0.04 x 7.9 x 11.8 in
GPMR7805
Carbon Fiber Tubes 0.02 x 0.12 x 39.4 in
GPMR7905
Carbon Fiber Strips 0.02 x 0.12 x 39.4 in (2)
GPMR7620
Carbon Fiber Sheet 0.08 x 7.9 x 11.8 in
GPMR7810
Carbon Fiber Tubes 0.02 x 0.16 x 23,6 in
GPMR7910
Carbon Fiber Strips 0.03 x 0.12 x 23,6 in (2)
GPMR7630
Carbon Fiber Sheet 0.12 x 7.9 x 11.8 in
GPMR7815
Carbon Fiber Tubes 0.02 x 0.16 x 39.4 in
GPMR7915
Carbon Fiber Strips 0.03 x 0.12 x 39.4 in (2)
GPMR7820
Carbon Fiber Tubes 0.04 x 0.18 x 23,6 in
GPMR7920
Carbon Fiber Strips 0.04 x 0.20 x 23,6 in (2)
GPMR7830
Carbon Fiber Tubes 0.04 x 0.20 x 23,6 in
GPMR7925
Carbon Fiber Strips 0.04 x 0.20 x 39.4 in (2)
GPMR7835
Carbon Fiber Tubes 0.04 x 0.20 x 39.4 in
GPMR7930
Carbon Fiber Strips 0.08 x 9,9 x 23,6 in
GPMR7840
Carbon Fiber Tubes 0.04 x 0.22 x 23,6 in
GPMR7940
Carbon Fiber Strips 0.10 x 0.20 x 23,6 in
Propeller
reamer
Aircraft transport and
building stand
Order no.: ROBP1402
The propeller reamer enbles
fast and simple enlarging of the
propeller bore to fit the motor
shaft.
4-step standard
propeller reamer
Order no.: GPMQ5005
Precision propeller
reamer standard
Order no.: GPMQ5006
Precision propeller
reamer metric
Order no.: GPMQ5007
For Ø 3/16“, 1/4“, 5/16“, 3/8“
For Ø 1/4“ 5/16“ 3/8“
For Ø 7mm, 8mm, 10mm
75
Digital heli
pitch gauge
Order no.: HMXR4854
Rotor blade balance
Order no.: HMXR4855
The HELI-MAX rotor blade balance enables precise balancing
of main and tail rotors, providing vibration-free operation of
helicopter models.
Curved Tip Ball
Link Pliers
Order no.: HMXR4858
The digital pitch gauge simplifies the accurate setting of
collective pitch, roll and pitch adjustment, being the foundations
for a properly-flying model helicopter. Therefore a good pitch
gauge is a must for every striving heli pilot.
Small Ball
Link Pliers
Order no.: HMXR4857
Made from high quality materials, ball link pliers are especially helpful
when assembling, adjusting, or disassembling ball joints, e.g. around a
helicopter rotor head.
Heli ball end tool
Order no.: HMXR4859
With this useful tool, threading a ball end onto a pushrod
becomes child’s play. The ball end can be firmly gripped
without the risk of deformation.
RC-Car accessories
Body clips, 45° bent
Order no.
HCAQ6771
HCAQ6772
HCAQ6773
HCAQ6780
HCAQ6781
HCAQ6782
HCAQ6790
HCAQ6791
HCAQ6792
Description
Body Clips 1/10 "Gold", 45° Bent
(10 pcs)
Body Clips 1/10 "Green", 45° Bent
(10 pcs)
Body Clips 1/10 "Purple", 45° Bent
(10 pcs)
Body Clips 1/8 "Gold", Medium, 45° Bent
(10 pcs)
Body Clips 1/8 "Green", Medium, 45° Bent
(10 pcs)
Body Clips 1/8 "Purple" Medium, 45° Bent
(10 pcs)
Body Clips 1/8 "Gold", Large, 45° Bent
(10 pcs)
Body Clips 1/8 "Green", Large, 45° Bent
(10 pcs)
Body Clips 1/8 "Purple", Large, 45° Bent
(10 pcs)
Helicopter accessories
Pit Tech™
Deluxe 1/10 car stand, blue
Order no.: DTXC2370
Pit Tech™
Deluxe 1/8 truck stand, blue
Order no.: DTXC2380
SHOE GOO
109,4ml (3.7fl oz)
Order no.: DTXC2460
1/10 Onroad + Buggy
1/8 Buggy + 1/10 Truck
The modeler‘s all-in-one „fixit“
compound.
Pit Tech™
Camber gauge
Order no.: DTXR1146
Body
Repair Tape
Order no.: DTXR1210
Servo Tape
26x914x0.8 mm (1”x36”x1/32”)
Order no.: DTXR1215
Air filter oil
51,7ml (1.75fl oz)
Order no.: DTXC2465
Pit Tech™
Tire Glue 14,2g (1/2 oz)
Order no.: DTXR2000
ULTIMATE
E-clip tool 1.5-5mm
Order no.: DTXR1107
Pit Tech™ Threadlocker,
medium 5g (0,17 oz)
Order no.: DTXR2010
RC-Car accessories
Rotor blade
holders
Constructed to provide safe and simple
transport of model helicopters, these
blade holders have become practically
indispensable.
.30-Size Blade Holders
Order no.: HMXE1000
.60-Size Blade Holders
Order no.: HMXE1005
Mini Blade Holder
Order no.: HMXE1007
TrakPower Speed wash nitro
cleaner 946ml (32fl oz)
Order no.: TKPC8001
Krytech™
Lubricant 120ml (4fl oz)
Order no.: TKPC8006
Dust + Wet
Protection for Bearings.
76
TrakPower Gear grease
59 ml (2 fl oz.)
Order no.: TKPC8008
TrakPower temperature gauge
with stopwatch
Order no.: TKPP9000
Duratrax
Tire Sticks (4)
Order no.: DTXC2585
Temperature Range:
-27° to +428°F (-33° to +220°C)
77
Water scoop & outlet
High-Performance
Metal Propeller
Bestow your boat with a new top speed….all you need is one
of the high quality GrimRacer metal propellers! The GrimRacer
copper beryllium* Titan propeller are „Made in USA“ and are
available from all good specialised dealers. Benefit from the
advantages offered by these metal propellers to optimise the
performance of your powerboat.
Highlights:
- Metal propeller cast with the greatest degree of accuracy
- Extremely fine casting coupled with precision-bored hub results in an almost
pre-balanced propeller – right out of the box!
- Blades will not crack or deform like plastic, but will stay sharp longer with less
dulling and chipping
- Better to fine-tune than with stainless steel, easier to keep the blade in shape
when balancing, sharpening, or changing pitch
GrimRacer High-Performance Metal Propeller
Tuning Accessories
Item no.
Description
Type
Diameter
Pitch
Bore
AQUB9700
36 x 55
2-blade
36 mm
55 mm
1/8 in
AQUB9755
L38 x 55 Lifter
2-blade high lift
38 mm
55 mm
3/16 in
AQUB9758
L38 x 63 Lifter
2-blade high lift
38 mm
63 mm
3/16 in
AQUB9720
40 x 52
3-blade
40 mm
52 mm
3/16 in
AQUB9715
40 x 53
2-blade
40 mm
53 mm
3/16 in
AQUB9725
42 x 55
2-blade
42 mm
55 mm
3/16 in
AQUB9760
L40 x 57
3-blade
40 mm
57 mm
3/16 in
AQUB9763
L42 x 66 Lifter
2-blade high lift
42 mm
66 mm
Double convertor (1 pc)
Coupling insert for Ø 2 mm shaft (1 pc)
3/16 in
HCAQ8402
Coupling insert for Ø 2.3 mm shaft (1 pc)
HCAQ8403
Coupling insert for Ø 3 mm shaft (1 pc)
HCAQ8404
Coupling insert for Ø 3.2 mm shaft (1 pc)
HCAQ8405
Coupling insert for Ø 4 mm shaft (1 pc)
HCAQ8406
Coupling insert for Ø 5 mm shaft (1 pc)
HCAQ8407
Coupling insert for Ø 6 mm shaft (1 pc)
HCAQ8408
Coupling insert w/ 1/4-28UNF thread (1 pc)
HCAQ8409
Coupling insert w/ M3x0.5 thread (1 pc)
HCAQ8410
Coupling insert w/ M4x0.7 thread (1 pc)
HCAQ8411
Coupling insert w/ M5x0.8 thread (1 pc)
HCAQ8412
Coupling insert w/ M6x1.0 thread (1 pc)
66 mm
3/16 in
AQUB9768
L45 x 68 Lifter
2-blade high lift
45 mm
68 mm
3/16 in
AQUB9785
65 x 100
2-blade
65 mm
100 mm
1/4 in
105 mm
GrimRacer rubber boots have reinforced
ribbing which remains soft and flexible
for a long time. They are suitable for
sealing pushrods with Ø 2 mm.
Set of 2 pieces.
HCAQ8401
44 mm
67 mm
1/4 in
Boat Accessories
Reference:
- AQUB9785 and AQUB9787 are for powerboats with 23cc – 30cc combustion motors
- Lifter propellers are suitable for Hydros and outriggers
- 1/8 in = 3,17 mm ; 3/16 in = 4,76 mm ; ¼ in = 6,35 mm
* Beryllium is poisonous, observe safety regulations!
Propeller
Balancer
GrimRacer
Waterproof
Switch Boot
Order no: AQUB9502
GrimRacer Precision
Propeller Balancer
Order no: AQUB9575
Propeller not included in delivery.
78
Coupling centre unit
HCAQ8391
2-blade high lift
3-blade
This black anodised aluminium cooling jacket
is specially-made for the UL-1 Hydroplane,
but is also suitable for all 36 mm diameter
brushless motors. The water flowing directly
around the motor housing provides
especially efficient cooling. Length of the
cooled area is ca. 37 mm. A cooling jacket
hose (blue), O-rings and connecting
hardware are included.
GrimRacer
Rubber Boots
Order no: AQUB9503
Description
Water scoop & outlet (1 set)
Description
Coupling centre unit (1 pc)
L44 x 66 Lifter
67 x 105
This lightweight silicone cooling jacket is the
result of state-of-the-art mould-making
technology, and is a must for all fast powerboats. It channels water directly around the
housing of the motor (36-45 mm diameter)
providing heat dissipation of utmost efficiency.
Two PVC hoses for connection to the cooling
system are included.
Order no.
HCAQ8381
Order no.
HCAQ8386
AQUB9765
AQUB9787
GrimRacer
Silicone Jacket 36/45
Order no: AQUB9517
GrimRacer
Alu-Watercooling Jacket
Order no: AQUB9540
Balancing the propeller is a deciding factor when wishing to optimise the performance of
the boat, and prevent damage to drive components and other parts. A precision spirit level
is mounted in the aluminium base, and the level is adjusted accurately via three
thumbscrews. The balancing shafts run on precision steel rods giving greatest accuracy.
Balancing shafts for propeller hubs with 1/8“, 3/16“ and 1/4“ bores are included.
The base contains holders for storing the balancing shafts.
The flexible silicone waterproof switch boot
allows the receiver to be switched on and
off externally. The boot will fit almost all
standard R/C on/off switches.
GrimRacer
Rubber Drain Plug
Order no: AQUB9506
GrimRacer
Pro Sealing Tape
Order no: AQUB9514
Almost unavoidably, water will get inside
the boat hull. The GrimRacer drain plug
will allow water to be drained off without
the necessity of opening the model. The
integral T-handle prevents the plug from
being separated from the hull, so that it
cannot be lost.
Bore size for the plug Ø 6,5 mm.
This 3M® self-adhesive transparent
waterproof tape is ideal for sealing
boats. The tape is fuel, water, oil, and
nitro-resistant. Roll contains 17 Metres
of tape – enough for a whole weekend
of racing!
Width: 19 mm; Length: 17 m.
Ø = 2 mm
Ø = 2.3 mm
Ø = 3 mm
Ø = 3.2 mm
Ø = 4 mm
Ø = 5 mm
Ø = 6 mm
1/4 28 UNF
M3 x 0.5
M4 x 0.7
M5 x 0.8
M6 x 1.0
79
Foil Iron
Foil Iron
Order no.: COVR2705
The 21st Century foil iron was specially developed for modelling use, and it’s ergonomic shape makes accessing difficult-to-reach spots much
easier. A steplessly adjustable temperature regulator integrated in the handle can be optimally adjusted to the required foil temperature.
Also set into the handle , is an LED which indicates the iron’s operational status. Delivery of the iron also includes a cover, to optimise ironing
results.
GrimRacer
Carbon Trimming Plate Set
Order no: AQUB9541
GrimRacer
Aluminium Mono Strut Assembly
Order no: AQUB9543
Completely pre-assembled CNC-machined
trimming plates, all necessary fittings with
stainless steel screws, for boats with hull
length 60-90 cm.
Contains two trimming plates.
Factory-assembled CNC-machined strut
assembly, with adjustable pitch and height.
Streamlined strut leading edge with low-lift
bottom edge. Fits 6.5mm propeller shaft
tube. Includes all necessary fittings with
stainless steel screws. Holder length ca.
70 mm, strut height ca. 60 mm.
Contains one mono strut assembly.
Boat Accessories
The protective cover protects the foil from being damaged
by the iron whilst being applied.
SmartCut
Order no.: TOPR2400
SmartStripe
Trim Strip Cutter
Order no.: TOPR2420
WoodPecker
Perforating Tool
Order no.: TOPR2190
The TOP FLITE „SmartCut“ enables foil to be accurately cut from
corners, edges, interiors etc. Easy to use, it helps make durable
overlaps, and straight cuts for practically invisible joins in the foil.
The SmartStripe enables exact cutting of trimming strips for your
model. Foil and trims of up to 125mm max. width can be cut
with the SmartStripe.
The WoodPecker prevents bubbles being formed under the
covering foil. Simply roll the tool over the covering to create tiny
perforations, and thus prevent air bubbles being formed.
Iron-on covering foil accessories
GrimRacer
Aluminium Rudder Assembly
Order no: AQUB9542
80
Protective
Iron Cover
Order no.: TOPR2175
Fully pre-assembled, CNC-machined rudder system with shear-pin
protection and integral water pick-up, bronze rudder bearings, and
aluminium rudder horn. Includes all necessary fitting hardware with
stainless steel screws. Contains one rudder system.
GrimRacer
Aluminium Turn Fin Set
Order no: AQUB9544
Fully assembled, CNC-machined, with tapered leading edge,
including all fitting materials with stainless steel screws.
Blade length ca. 57 mm. Contains two turn fin mounts and
one each left and right blades.
Star Template Set
Order no.: TOPR2186
Plastic template simplifies cutting seven
different sizes of star from covering foil.
Scale Warbird
Template
Order no.: TOPR2187
The scale warbird helps apply differing scale renderings of rivets,
tank caps, lines, and metal seams, greatly enhancing the model’s
appearance.
81
Self-adhesive
Striping tape
Great Planes has developed these striping tapes especially for planes,
cars and helicopters, allowing you to create your own individual colour
schemes and trim designs.
The stripes can be easily applied in straight lines and gentle curves
and are also flexible enough to be used for more complex contours.
The specially developed decorative stripe is fuel-proof.
82
Order no.
GPMQ1000
GPMQ1004
GPMQ1008
GPMQ1016
GPMQ1020
GPMQ1028
GPMQ1032
GPMQ1080
GPMQ1084
GPMQ1088
GPMQ1092
GPMQ1096
GPMQ1100
GPMQ1108
GPMQ1112
GPMQ1120
GPMQ1124
GPMQ1204
GPMQ1208
GPMQ1216
GPMQ1220
GPMQ1232
GPMQ1236
GPMQ1240
GPMQ1244
GPMQ1252
GPMQ1256
GPMQ1300
GPMQ1320
GPMQ1330
GPMQ1332
GPMQ1335
GPMQ1338
GPMQ1340
GPMQ1360
GPMQ1370
GPMQ1372
GPMQ1375
GPMQ1378
GPMQ1380
GPMQ1400
GPMQ1410
GPMQ1420
GPMQ1440
GPMQ1450
GPMQ1460
GPMQ1480
GPMQ1490
GPMQ1500
GPMQ1520
GPMQ1530
GPMQ1540
GPMQ1560
GPMQ1570
GPMQ1580
GPMQ1600
GPMQ1610
Length
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
11 m
Width
1,6 mm
3,2 mm
6,4 mm
3,2 mm
6,4 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
3,2 mm
6,4 mm
3,2 mm
6,4 mm
3,2 mm
6,4 mm
3,2 mm
6,4 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
1,6 mm
3,2 mm
6,4 mm
Colour
Red, fluorescent
Red, fluorescent
Red, fluorescent
Pink, fluorescent
Pink, fluorescent
Yellow, fluorescent
Yellow, fluorescent
Chrome/Silver
Chrome/Silver
Chrome/Silver
Chrome/Gold
Chrome/Gold
Chrome/Gold
Chrome/Red
Chrome/Red
Chrome/Blue
Chrome/Blue
Blue Metallic
Blue Metallic
Dark Blue Metallic
Dark Blue Metallic
Red Metallic
Aluminium Metallic
Aluminium Metallic
Aluminium Metallic
Anthracite Metallic
Anthracite Metallic
Red
Red
Red
Dark Red
Dark Red
Dark Red
Blue
Blue
Blue
Dark Blue
Dark Blue
Dark Blue
Orange
Orange
Orange
Yellow
Yellow
Yellow
Black
Black
Black
Gold Metallic
Gold Metallic
Gold Metallic
Silver Metallic
Silver Metallic
Silver Metallic
White
White
White
Metallic Colours
Pearl Colours
Flat Colours
Opaque Colours
Self-adhesive Foils*
Colour
66x180 cm
Colour
66x180 cm
Colour
66x180 cm
Colour
125x915 mm
Aluminium TOPQ0205
Pearl red
TOPQ0421
Flat
Sky Blue
TOPQ0506
Rouge
TOPQ0201
Missile Red
TOPQ4101
Chrome
TOPQ0209
Pearl yellow TOPQ0423
Flat
Dark Blue
TOPQ0507
Orange
TOPQ0202
Orange
TOPQ4102
Yellow
TOPQ4103
Green
metallic
TOPQ0401
Pearl white TOPQ0424
Flat Black
TOPQ0508
Yellow
TOPQ0203
White
TOPQ4104
Aluminium
TOPQ4105
Blue
metallic
TOPQ0402
Pearl wine
TOPQ0425
Flat
Olive Drab
TOPQ0510
White
TOPQ0204
Insignia Blue
TOPQ4106
Plum
metallic
TOPQ0403
Pearl blue
TOPQ0426
Flat
Dove Grey
TOPQ0511
Sky blue
TOPQ0206
Chrome Gold
TOPQ4107
Black
TOPQ4109
Gold
metallic
TOPQ0404
Pearl Teal
TOPQ0427
Flat Cream
TOPQ0512
Insignia
blue
TOPQ0207
TOPQ4110
Red
metallic
TOPQ0405
Pearl copper TOPQ0428
Flat Tan
TOPQ0516
Black
TOPQ0208
Charcoal
metallic
TOPQ0407
Olive drab
TOPQ0210
Platinum
metallic
TOPQ0408
Dove grey
TOPQ0211
Teal
metallic
TOPQ0409
Cream
TOPQ0212
Chrome
Red-White
Chequer
Red-Transparent
Chequer
Black-White
Chequer
Black-Transp.
Chequer
Black-Yellow
Chequer
Blue Mist
Dark red
TOPQ4118
Wine
metallic
TOPQ0410
Maroon
TOPQ0213
DayGlo red
TOPQ4120
DayGlo orange
TOPQ4121
Sky blue
TOPQ4122
Red Chrystal
TOPQ4125
Circus pink
TOPQ4127
Plum metallic
TOPQ4128
Colour
66x180 cm
When you have spent hour upon hour building your
model, then it deserves nothing but the best covering.
Use MONOKOTE.
Forest
green
Covering Film
Transparent Colours
Colour
TOPQ0214
Circus pink TOPQ0215
Tan
TOPQ0216
Blue mist
TOPQ0217
Neon Colours
66x180 cm
Transparent TOPQ0200
Orange
TOPQ0302
transparent
Colour
66x180 cm
Neon pink
TOPQ0701
Neon green TOPQ0702
Yellow
TOPQ0303
transparent
Neon yellow TOPQ0703
Blue
TOPQ0304
transparent
Neon orange TOPQ0704
Red
TOPQ0305
transparent
Neon red
TOPQ0705
Green
TOPQ0306
transparent
Neon blue
TOPQ0706
- Excellent shrink and stick properties
- Simple to apply
- Reliable adhesion, even after
years of use
- Puncture and scratch resistant
- Brightest colours
Dark red
Cub yellow TOPQ0220
Royal blue
Teal
*Self-adhesive MonoKote foils are
easily applied and allow you to
colour your model with your own
personal design without timeconsuming, messy painting.
TOPQ0218
TOPQ0221
TOPQ0223
Light purple TOPQ0224
Medium
purple
TOPQ0225
Sapphire
blue
TOPQ0226
True red
TOPQ0227
TOPQ4111
TOPQ4112
TOPQ4113
TOPQ4114
TOPQ4115
TOPQ4117
Charcoal metallic TOPQ4129
Neon pink
TOPQ4131
Neon blue
TOPQ4132
Neon green
TOPQ4133
Neon red
TOPQ4134
Neon yellow
TOPQ4135
Neon orange
TOPQ4136
Cub yellow
TOPQ4220
Royal blue
TOPQ4221
Dark Teal
TOPQ4223
Medium purple TOPQ4225
Saphire blue
TOPQ4226
True red
TOPQ4227
Printing technology may falsify colours
slightly.
83
Solid gloss
Perfect gloss, scratch-resistant
and good even coverage
„Revell Email Color“ colours in
14-ml cans are ideal for painting
small areas.
The next coat can be applied after
only 4-6 hours, and the paint is
completely dry after 24 hours.
36101 / 32101
36150 / 32150 RAL 5012
Clear
Light Blue
36104 / 32104 RAL 9010
36151 / 32151 RAL 5002
White
Ultramarine
36107 / 32107 RAL 9005
36152 / 32152 RAL 5005
Black
Blue
36112 / 32112 RAL 1018
Yellow
All 88 colours are available as „Aqua Color” and „Email Color”:
Aqua Color (36...) / Email Color (32...)
Solid matte
18 ml
36102 / 32102
36145 / 32145 RAL 7003
36176 / 32176
Clear
Light Olive
Med. Grey USAF
36154 / 32154 RAL 5022
36105 / 32105 RAL 9001
36146 / 32146 RAL 7013
36177 / 32177 RAL 7012
Night Blue
White
Nato Olive
Dust Grey
36130 / 32130 RAL 2004
36161 / 32161 RAL 6029
36106 / 32106 RAL 9021
36147 / 32147 RAL 7005
36178 / 32178 RAL 7024
Orange
Emerald Green
Tar Black
Mouse Grey
Tank Grey
36131 / 32131 RAL 3000
36162 / 32162 RAL 6005
36108 / 32108 RAL 9011
36148 / 32148 RAL 6028
36179 / 32179 RAL 7031
Fiery Red
Sea Green
Black
Sea Green
Greyish Blue
36134 / 32134
36180 / 32180 RAL 8003
36109 / 32109 RAL 7021
36149 / 32149
36182 / 32182
Ferrari Red
Mud Brown
Anthracite
Light Blue
Dark Earth RAF
36115 / 32115 RAL 1017
36155 / 32155 RAL 6027
36183 / 32183
Yellow
Light Green
Rust
(36...)
14 ml
(32...)
Solid silk matte
Email Color / Aqua Color
Quick-drying, virtually odourless
and environmentally friendly
No compromises:
All colours in the proven „Revell Email Color“ range are also available as
Aqua Color colours. The environmentally friendly acrylic paints are qick-drying
and have a mild odour. Brushes are easily cleaned with water.
Can be painted over after 1 hour,
dry after 2-3 hours.
84
1h
36301 / 32301 RAL 9010
36361 / 32361 RAL 6003
36116 / 32116 RAL 1024
36156 / 32156 RAL 5000
36184 / 32184 RAL 8027
White
Olive Green
Sand
Blue
Leather Brown
36302 / 32302 RAL 9005
36362 / 32362 RAL 6013
36117 / 32117
36157 / 32157 RAL 7000
36185 / 32185 RAL 8023
Black
Greyish Green
Africa Brown
Grey
Brown
36310 / 32310 RAL 1028
36363 / 32363 RAL 6020
36125 / 32125
36159 / 32159
36186 / 32186 RAL 7008
Lufthansa Yellow
Dark Green
Luminuous Orange
Sky RAF
Khaki Brown
36312 / 32312 RAL 1026
36364 / 32364 RAL 6001
36190 / 32190
36135 / 32135
36165 / 32165 RAL 6031
36187 / 32187 RAL 7006
Luminuous Yellow
Leaf Green
Silver
Flesh
Bronze Green
Earth
36314 / 32314 RAL 1001
36365 / 32365 RAL 6000
36191 / 32191
36136 / 32136 RAL 3002
36166 / 32166 RAL 7010
36188 / 32188 RAL 1011
Beige
Patina Green
Steel
Carmine Red
Olive Green
Ochre
36330 / 32330 RAL 3000
36371 / 32371 RAL 7035
36192 / 32192
36137 / 32137 RAL 3009
36167 / 32167 RAL 7009
36189 / 32189 RAL 1019
Fiery Red
Light Grey
Brass
Reddish Brown
Greenish Grey
Beige
36331 / 32331 RAL 3004
36374 / 32374 RAL 7001
36193 / 32193
36139 / 32139
36168 / 32168
Purple Red
Grey
Copper
Dark Green
Dark Green RAF
36332 / 32332 RAL 3026
36378 / 32378 RAL 7012
36194 / 32194
36140 / 32140
36169 / 32169 RAL 7026
36730 / 32730
Luminuous Red
Dark Grey
Gold
Black Green
Granite Grey
Orange
36350 / 32350 RAL 5013
36381 / 32381 RAL 8025
36195 / 32195
36142 / 32142
36174 / 32174
36731 / 32731
Lufthansa Blue
Brown
Bronze
Yellowish Olive
Gunship Grey
Red
36360 / 32360 RAL 6025
36382 / 32382 RAL 8001
36199 / 32199
36143 / 32143
36175 / 32175 RAL 7030
36752 / 32752
Fern Green
Wood Brown
Aluminium
Medium Grey USAF
Stone Grey
Blue
Solid metallic
Clear
85
Thinner:
Special „Aqua Color” accessories
The 32 most-used Revell colours
in a practical 100-ml aerosol spray can:
The fast and easy
alternative to an airbrush!
Solid matte
Solid glossy
Solid silk matte
34101
34102
34301
Clear
Clear
White
34104
RAL 9010
34105
34107
RAL 9005
34108
34112
RAL 1018
RAL 9011
34109
34131
RAL 3000
34115
Fiery Red
Yellow
34134
34116
Ferrari Red
Sand
RAL 5005
RAL 7021
RAL 1017
34146
RAL 3002
RAL 7013
34157
SPRAY COLOR
100 ml
(34...)
RAL 5000
86
CLEAN
CLEAN
CLEAN
CLEAN
Gold
RAL 7000
Primer
Aqua Color Basic 25 ml
Order no.: 39622
Removes dried-on paint residue
from brushes and spray guns.
Fresh paint residues can be easily
removed with water.
After sanding or filling, a
model surface should be
primed prior to painting.
Thinner &
Drying retarder
Aqua Color Mix 100 ml
Order no.: 39621
Quality synthetic brushes
Painta Aqua Brushes Set
Order no.: 39624
Prevents Aqua Color paints
from drying too quickly in the
spray gun, and optimises the
airbrush spray – especially
with matte colours.
Sizes: 00, 1, 2, 3, 5
These quality durable paint brushes
were especially developed for
Aqua Color paints and enable very
even paint application.
Accessories
34194
34199
34176
34200
Light Grey USAF
RBR Blue
Special „Email Color”
paints accessories
Thinner:
3x
+ 2x
=
RAL 7024
Tank Grey
34185
RAL 8023
Brown
34188
1 1 1 1
min.min.min.min.
34191
Aluminium
Ochre
20-30
20-30
cm20-30
cm
2-3
2-3 2-3
X 3
X 3 3 3
20-30
cm X2-3
cm X
sec. sec. sec.sec.
RAL 7001
Cleaner
Aqua Color Clean 100 ml
Order no.: 39620
34190
Grey
34178
RAL 7035
Solid metallic
Steel
Blue
Spray Color, 100 ml
34374
Silver
Nato Olive
34156
34371
RAL 1024
Carmine Red
Spray Color
RAL 3000
Grey
34125
34136
34330
Light Grey
Luminuous Orange
Blue
RAL 9005
Fiery Red
Anthracite
Yellow
34302
RAL 9010
Black
Black
Black
34152
RAL 9001
White
White
A model first really attains it‘s scale appearance when
it has been well painted. However, larger surfaces are
not easily painted with a brush, and for that reason,
the 32 most-used Revell colours are now available in a
practical 100-ml aerosol spray can. Revell Spray Colors
are acrylic quick-dry, solid covering, scratch-resistant
paints. With their special ingredients, they can also be
used to paint polycarbonate R/C car bodies.
or
RAL 1011
Primer Spray
Basic Color 150 ml
Order no.: 39804
Brush Cleaner
Painta Clean 100 ml
Order no.: 39614
Thinner
Color Mix 100 ml /30 ml
Order no.: 39612 / 39611
A good priming with
„Revell Basic Color“ is
the best precondition to
obtain optimal painting
results.
Clean your brushes carefully
after use with „Revell Painta
Clean.“ Email paints can be
thinned with „Revell Color Mix“.
Thin your paints with „Revell
Color Mix” to be able to use
them with your spray gun.
87
With quality accessories you can
produce a „top model“ from your kit.
305 x 228mm
450 x 300mm
Masking paint
Color Stop 30 ml
Order no.: 39801
Glowing night paint
Night Color 30 ml
Order no.: 39802
Putty filler
Plasto 25 g
Order no.: 39607
Plastic adhesive
Contacta Glue 13 g
Order no.: 39602
Plastic adhesive paste
Contacta Professional 25 g
Order no.: 39604
Cutting Mat,
Small/Large
Order no.: 39060 / 39061
Special Sidecutter
Precision Cutter
Order no.: 39000
A rubbery mass applied with a brush
to mask areas or lines. Paint brushed
or sprayed over the covered areas
can be then peeled off along with the
dried mass.
Phosphorescent
luminous paint for
spooky light effects
in darkness..
Putty for rectifying building errors
and filling gaps.
Adhesive gel in a tube. The
advantage is that larger components can be precisely positioned before the glue dries.
For pinpoint accuracy in bonding.
Extra-fine hollow needle enables
micro-fine bonding of tiny details.
Four-ply self-repairing cutting mat
protects the work surface and
eases eye-strain with it‘s blue
non-reflective surface.
Makes light work of
removing kit parts
from the sprue frame.
Accessories
Scalpel
Order no.: 39059
Scalpel knife for
precision cutting,
Includes 5 spare
blades.
Modelling Knife
Model Cut
Order no.: 39000
Primer paint
Airbrush Email Basic
Order no.: 39001
Spray Gun Cleaner
Airbrush Clean 500 ml
Order no.: 39005
Sturdy modelling knife
with snap-off metal blades
enables precise cutting.
Primer 25 ml.
Primer garantees a
perfect colour finish.
„Revell Airbrush Clean”
protects the airbrush nozzle
from drying out and dissolves
lightly dried-on paint.
Accessories
Quality Brushes
Painta Standard Brushes
Order no.: 29621
High Quality Badger Hair Brushes
Painta Luxus Brush Palette
Order no.: 39629
Flat Brushes
Painta Flat Brushes Set
Order no.: 29610
Set-Sizes: 00-4
Set-Sizes: 5/0, 00, 2, 5
Brush Sizes: 2, 6, 10
Painta Standard
Brush sizes: 00-6
Painta Luxus
Brush sizes: 5/0-3
Paint Mixing Jar
Order no.: 38300
For mixing and storing paints.
Can be used with all Revell
spray guns with hanging
reservoirs.
Spray Adapter
„Starter Class”
Order no.: 38265
Airbrush
Cleaning Set
Order no.: 39190
Propellant
Airbrush Power 400/750 ml
Order no.: 39665/39661
Masking Tape 10 m
Order no.: 39694/39695
6 Pipettes Set
Order no.: 38370
Fits spray gun „starter class.“
Easy Click system enables
fast colour change without
cleaning. Fits mixing jar
38300.
Comprising glass container,
filter, filter cap, spray gun
holder and storage box.
Excess atomised paint is
simply sprayed into the
glass container.
Ideal for airbrush beginners.
Affordable compressed air
in a can. 750 ml container
provides ca. 20 minutes
operation.
10m x 6 mm/10m x10 mm
Quality masking tape for a
perfect paint job. Reliably
prevents unwanted paint
runs during painting.
6-Pipette set with
ml marking. Allows
precise dosage of
paints and thinners.
89
P
erfect painting of larger model
areas is child‘s play with this spray
gun. The ergonomically formed grip
makes it easy to hold, and the Easy
Click-System simplifies operation.
Having no complex fine mechanism,
this gun is ideal for spraying more
viscous paints, such as „Aqua Color“
or „Email Color“.
„Standard Class” –
for the ambitious beginner
s
Set include ons
ti
c
u
tr
s
detailed in
Spray Gun „Starter Class”
Order no.: 29701
Those airbrush beginners who are looking
for a continuous supply of compressed air
will appreciate this set.
Airbrush-Set „Starter Class”
Order no.: 39196
- Spray gun Starter Class‘ with ergonomic
design and improved handling through
Easy Click-System
- 2 x 18 ml Aqua Color paint
- 2 Mixing jars with lids and 2 pipettes
- 25 ml Aqua Color Clean
r
sso
with compre
Airbrush „Basic Set with compressor”
Order no.: 39199
-
25 ml Aqua Color Mix
Jumbo propellant
Propellant regulator
Compressed air hose
Illustrated instructions
- Spray Gun, internal mixing (nozzle: 0.5 mm)
- Mini-compressor (1 bar working
pressure)
- 2 x 18 ml Aqua Color paint
- 2 Mixing jars with lids
- 2 Pipettes
„Starter Class”
- 25 ml Aqua Color Clean: paint
residue cleaner
- 25 ml Aqua Color Mix: Thinner and
drying-retarder
- Compressed air hose
- Operating instructions
„Standard Class”
This robust spray gun is easy to
use, and with its various nozzle
sizes, is extremely versatile.
90
Compressor „Starter Class”
Order no.: 39136
Spray Gun „Standard Class”
Order no.: 39101
Compressor „Standard Class”
Order no.: 39137
-
- Spray Gun‚ „Standard Class“
(with medium nozzle)
- Propellant Regulator
- Paint Jar with Lid
- Jar Adaptor
- Compressed Air Hose
- Operating Instructions
-
Oil-free piston compressor
Maximum Pressure: ca. 3 bar
Air Output: ca. 11 l/min
Noise Level: ca. 57 dB
Suitable Spray Gun: 29701 Spray Gun „Starter Class”
220-240 V/50 Hz/90 W
Oil-free Piston Compressor
Maximum Pressure: ca. 4.3 bar
Air Output: ca. 23 l/min
Noise Level: ca. 55 dB
Manometer
Pressure Regulator
- Water Separator
- Automatic Cut-off
- Suitable for following spray guns:
• 29701 Spray Gun „Starter Class”
• 39101 Spray Gun „Standard Class”
- 220-240 V/50 Hz/135 W
91
A
n excellent spray gun for
airbrush specialists, able to
cope with finest lines and
details. The included pipettes
allow for exact paint dosage.
The „VARIO” from the
„Master Class” is a multitalent, letting you not
only spray large areas,
but also paint camouflage
and ageing effects.
Compressor „Master Class”
Order no.: 39138
Spray Gun „VARIO”
Order no.: 39107
Spray Gun „PROFESSIONAL”
Order no.: 39108
- Spray Gun „Master Class” VARIO
(nozzle„medium” = 0.7 mm)
- Two empty paint jars
- Jar Adaptor
- Operating Instructions
- Spray Gun „Master Class” PROFESSIONAL
(nozzle „fine” = 0.5 mm)
- Two pipettes
- Operating instructions
„Master Class”
Camouflage painting • Detailing • Ageing effects
-
Oil-Free Piston Compressor
Twin Cylinders
Maximum Working Pressure: ca. 4.4 bar
Air Output: ca. 32 l/min
Tank Vol. ca. 25 Liter
Noise Level: ca. 50 dB
2 Manometers
pressure Regulator
Water Separator
Safety Valve
Automatic Safety Cut-off
Suitable for all Revell Spray Guns
220-240 V/50 Hz/145 W
„Master Class”
To give your models that perfect original look
The „FLEXIBLE” from the
„Master Class” was designed for
maximum flexibility. The paint
pot can be turned 360°, and
filled from above, can accept
smallest quantities of paint.
Turned below, it will accept full
paint jars for spraying large
areas.
92
Spray Gun „FLEXIBLE”
Order no.: 39109
Low Pressure Air Hose
Order no.: 38230
High Pressure Air Hose
Order no.: 38250
- Spray Gun „Master Class” FLEXIBLE
(nozzle „fine” = 0.5 mm)
- Jar Adaptor
- Two empty Paint Jars
- Pipette for paint Dosage
- Operating Instructions
Low Pressure Air Hose (170 cm)
High Pressure Air Hose (180 cm),
with compressor adaptor
93
Landing gear and accessories
Order no.: ROBQ1634
Order no.: ROBQ2220
Order no.: ROBQ1635
Order no.: ROBQ2231
Order no.
TOPQ8276
Description
Main landing gear, pneumatic
Suitable for
TOPA0500 DC-3
ROBQ1634
Main landing gear, elektric
TOPA0700 Giant P-51 Mustang
ROBQ1635
Main landing gear, pneumatic
TOPA0700 Giant P-51 Mustang
ROBQ1636
ROBQ1648
Main landing gear, pneumatic
Main landing gear, pneumatic
TOPA0703 Giant P-47 Thunderbolt
TOPA0712 Giant Zero
ROBQ1649
Main landing gear, elektric
TOPA0712 Giant Zero
ROBQ1650
Main landing gear, pneumatic
TOPA0708 Giant Spitfire
ROBQ1651
Main landing gear, elektric
TOPA0708 Giant Spitfire
ROBQ1655
Main landing gear, pneumatic
TOPA0704 Giant F4 U Corsair
ROBQ1656
Main landing gear, elektric
TOPA0704 Giant F4 U Corsair
ROBQ1657
Main landing gear, elektric
TOPA0706 Giant FW-190
ROBQ1658
Main landing gear, pneumatic
TOPA0706 Giant FW-190
ROBQ2220
Rear landing gear, pneumatic
TOPA0706 Giant FW-190
ROBQ2225
Rear landing gear, pneumatic
TOPA0700 Giant P-51 , TOPA0703 Giant P-47
ROBQ2230
Rear landing gear, pneumatic
TOPA0704 Giant F4 U Corsair, TOPA0712 Giant Zero
ROBQ2231
Rear landing gear, elektric
suitable for all Giant Models
ROBQ2305
Pneumatic control set
ROBQ2363
Manual pump
ROBQ2369
Compressed air tank
ROBQ2395
Air Line Quick disconnects
Mechanical retractable landing gear
TOPQ7950
.60 Main landing gear, mechanical
ROBART Retractable landing gears
Robart retractable landing gears
Robart retractable landing gears are of durable metal construction, and factory-fitted
with suspension. Specially made for models, they are available as pneumatically
or electrically operated units. With their realistic appearance and durability, these
landing gears are especially suitable for our Top Flite giant model range. Many years
of experience in the construction of landing gears for model aircraft is a guarantee
for high quality.
Mechanical retractable landing gears
This versatile, mechanically operated landing gear is popular with our smaller Top
Flite models, and is especially suitable for models with a takeoff weight of 4.5 kg.
Landing gear legs can be fashioned from 5mm spring steel wire, so that the
landing gear unit can be adapted to fit practically any model.
Retracting unit dimensions: Length: 44 mm Width: 44 mm Height: 28.4 mm
94
Mechanical retractable landing gear
Order no.: TOPQ7950
for models up to 4.5 kg – such as TopFlite AT-6 Texan, P-51, P-47
Hobbico’s fascinating wide range of models:
Modelling Rockets, Order no.: 94196
RC-Model Sport Aircraft, Order no.: 94184
RC-Model Sport Boats, Order no.: 94185
FliteWork, Order no.: 94193
RC-Model Sport Cars, Order no.: 94186
RC-Modelling Accessories, Order no.: 94187
Catalogues 2014
|
|
www.hobbico.de
blog.hobbico.de
www.youtube.com/hobbico
www.facebook.com/hobbico.de
Dealer Stamp
© 2014 Hobbico Inc. – distributed by Revell GmbH, Henschelstr. 20-30, 32257 Bünde
| Made and printed in Germany. Errors and technical alterations excepted.
Airtronics, APC, Blade, Deans, E-flite, Flitework, Futaba, Graupner, Hitec, JR, Microsoft, MPX, Novak,
Pit Tech, Red Bull, Robart, robbe, T-REX, Tamiya, The Flying Bulls, Traxxas, TYGON, Sanwa, Shoe Goo,
Spektrum, Walkera and Windows are protected registered trademarks and are the property of their
respective owners. The products shown in this catalogue are not toys and are suitable only for
children above 15 years of age.
Best.-Nr.: 94187
A subsidiary of Hobbico, Inc. – Revell is the registered trademark of Revell GmbH.