Iriscopter 4
Multicopter
Iriscopter_4 is a four rotors multicopter of 650 mm in diameter with NAZA flight controller model V2 of DJI manufacturer.
This equipment can achieve very aceptable flight times (25 - 35 min) carrying stabilized cameras of small weight (both
daytime and thermal).
The operator will drive the multicopter using a radio control through which it is possible to change the angle of the
camera. The image captured by the camera can be displayed on a 7” monitor attached by a bracket to the pilot station.
The operator will have the telemetry data superimposed on the image.
multicopter using control software
that exists in two versions: for IPAD
(version 3 or higher) and for PC. This
software allows multicopter perform
operations independently, route of
CHASSIS, MOTORS AND PROPELLERS
Characteristics of this chassis are the following:
•Chassis of 650mm in diameter.
•476g of weight.
waypoints (up to 16 for this model),
•Made from Japanese 3K carbon, cut by CNC machine.
fly to a selected point, etc.
•Folding design for easy transport. Both arms and landing gear fold.
The
software application communicates
•Front mount for gimbal, with adjustable along the tube position.
with multicopter using a data link in
•Mounting position of the battery also adjustable for easy adjustement
of the center of gravity.
2,4 GHz.
TRIEDRO · Headquarters: C/ Ronda de Valdecarrizo, 41. 28760, Tres Cantos. Madrid (España) · Tel. (34) 91 8061810 · Fax (34) 91 8041955 · www.triedro.es
www.triedro.es
Also it is posible to control the
FLIGHT CONTROLLER
The flight controller is model NAZA V2 of DJI
manufacturer. It is accompanied by a GPS which makes
the flight safer and easier.
•Return home: This feature allows multicopter
return to origin point at the touch of a button on the
transmitter.
•3 flight modes: manual, stabilized, stabilized
with GPS.
•Failsafe: It is possible configure the controller for in
case of loss of communication with the multicopter
or due to a low level on the batteries it will return to
home or take land immediately.
•IOC (Intelligent Orientacion Control):
There are two flight modes where the motion of the
device is independent of the orientation of it, so
drive is easier for inexperienced users.
•LED notification: The controller has a small module
equipped with a LED that notifies the different
states of the controller: GPS OK, Failsafe, flight
mode, etc.
The features offered are:
Computer radio system
OSD (On Screen Display)
The OSD is an equipment that allows overlay telemetry
data on the image that operator views, to know some
information that facilitates the piloting. The model is
iOSD Mini of DJI.
The computer radio system for controlling the
multicopter is Futaba 10J.
Some features are:
•2,4 Ghz S-FHSS.
•10 channels.
•Memory
for 30 models.
•Telemetry.
•Etc.
Computer radio system
Information superimposed on the image
GIMBAL AND GOPRO HERO 3 CAMERA
The
The equipment for remote
video
visualization
consists on an analog
video
5,8GHz
transmitter
and
of
600mW,
7” inch monitor with a
receiver
incorporated
www.triedro.es
and two antennas for a
better reception (Dual
Diversity). This monitor
will dock with the station
using a support designed
Station / monitor set
for that purpose.
gimbal/camera
interchangeable
dimensions
with
assembly
other
sets
is
easily
of
similar
and
weights. Initially it
includes a gimbal
(camera support) of
2-axis rotation driven
by special engines
for
this
purpose
and a GoPro Hero 3
camera capable of
capturing and storing
video resolutions up
to 4K.
C/ Fragua nº 6
28760, Tres Cantos. Madrid (España)
Tel. (34) 91 806 18 10 · Fax (34) 91 804 19 55
www.revenga.com
GoPro Hero 3
on 2-axis gimbal
2015 Edition © Triedro
VIDEO TRANSMITTER AND LCD MONITOR