Chapter 20: Static Electricity

advertisement
Sky Light
During a thunderstorm,
Molly and Paresh were
watching lightning bolts
light up the sky. Paresh
was impressed by the
patterns of the lightning.
Molly asked Paresh,
“Why do you suppose
lightning jumps between
a cloud and Earth?”
What explanation might
Paresh give?
➥ Look at the text
on page 470 for
the answer.
CHAPTER
20
Static
Electricity
ature provides few more dazzling displays than lightning.
Is there a way to experience lightning close-up, perhaps
safely at home or in the school lab? Is lightning related to
some everyday occurrences? If you have ever scuffed your feet on
the carpet so that you could create a small spark between your
fingers and a friend’s nose, then you may be able to answer these
questions.
The connection between rubbing surfaces together and sparks
has been known for a long time. However, researchers had not
made the connection between sparks and lightning. After all,
sparks were seldom more than 1 or 2 centimeters long. Lightning,
on the other hand, could be several kilometers long. How could
they be related?
It took Benjamin Franklin’s ingenuity to see how a link
between lightning and sparks could be established. He reasoned
that if lightning was electricity, it had to be a great deal of electricity. In 1752, Franklin performed his famous kite experiment.
He flew the kite with a key attached to the string while a thunderstorm approached. During the flight, the loose threads of the
kite string began to stand up and avoid one another. When
Franklin brought his knuckle close to the key he experienced a
spark. This event was proof that “electrical fire” could be obtained
from a cloud. Franklin’s experiment set off a flurry of research in
the field of electricity. Over the next several chapters, you will
investigate electric phenomena and develop models to explain
what you observe.
N
WHAT YOU’LL LEARN
•
•
You will classify electrical
charge and analyze how
charge interacts with matter.
You will infer the rules of
how charge pushes and
pulls on the world.
WHY IT’S IMPORTANT
•
In this age of microprocessors and sensitive circuitry, a
knowledge of static electrical charge may save your
electronic components
from damage.
PHYSICS
To find out more about static
electricity, visit the Glencoe Science
Web site at science.glencoe.com
461
20.1
Electrical Charge
Y
OBJ ECTIVES
• Recognize that objects
that are charged exert
forces, both attractive and
repulsive.
•
•
Demonstrate that charging
is the separation, not the
creation, of electrical
charges.
Describe the differences
between conductors and
insulators.
FIGURE 20–1 Running a comb
through your hair transfers electrons to the comb, giving it a
negative charge. When the comb
is brought close to bits of paper,
a charge separation is induced
on the paper bits. The attractive
electrical force accelerates the
paper bits upward against the
force of gravity.
462
Static Electricity
ou may have had the experience of rubbing your shoes
on the carpet hard enough to create a lightning-like
spark when you touched someone. Franklin’s kite experiment
showed that lightning is similar to electricity caused by friction. Electrical
effects produced this way are called static electricity. In this chapter, you
will investigate electrostatics, the study of electrical charges that can be
collected and held in one place. Current electricity, produced by batteries
and generators, will be explored in later chapters.
Charged Objects
Have you ever noticed the way your hair is attracted to the comb
when you comb your hair on a dry day? Perhaps you also have found
that socks sometimes stick together when you take them out of the
clothes dryer. If so, you will recognize the attraction of the bits of paper
to a comb shown in Figure 20–1. If the weather is dry, try this yourself
now. Rub a plastic comb or ballpoint pen on your clothing. (Wool
clothing is best.) Then, hold the pen or comb close to a pile of paper
bits. Notice the way the paper pieces jump up toward the pen or comb.
There must be a new, relatively strong force causing this upward acceleration because it is larger than the downward acceleration caused by
the gravitational force of Earth.
There are other differences between this new force and gravity. Paper
is attracted to a comb only after the comb has been rubbed. If you wait
a while, the attractive property of the comb disappears. Gravity, on the
other hand, does not require rubbing and does not disappear. The
ancient Greeks noticed similar effects when they rubbed amber. The
Greek word for amber is elektron, and today this attractive property is
called “electrical.” An object that exhibits electrical interaction after
rubbing is said to be charged.
Like charges You can explore electrical interactions with very simple
equipment such as transparent tape. Fold over about 5 mm at the end
of a strip of tape for a handle and then stick the remaining 8- to 12-cmlong part of the strip on a dry, smooth surface such as your desktop.
Then stick a second, similar piece next to the first. Quickly pull both
strips off the desk and bring them near each other. What happens? The
strips have a new property that causes them to repel each other. They are
electrically charged. They were prepared in the same way, so they must
have the same type of charge. Therefore, you have just demonstrated
that two objects with the same type of charge repel each other.
You can learn about this charge by doing some simple experiments.
You may have found that the tape is attracted to your hand. Are both sides
attracted, or just one? If you wait a while, especially in humid weather,
you’ll find that the electrical charge disappears. You can restore it by again
sticking the tape to the desk and pulling it off. You also can remove its
charge by gently rubbing your fingers down both sides of the tape.
F.Y.I.
Charged objects will eventually return to their neutral
state. The charge “leaks off”
onto the water molecules
in the air. On humid or
rainy days it is difficult to
make any object hold its
charge for long.
Opposite charges Now, stick one strip of tape on the desk and place
the second strip on top of the first, as shown in Figure 20–2a. Use the
handle of the bottom strip of tape to pull the two off the desk together.
Rub them with your fingers until they are no longer attracted to your
hand. You’ve now removed all the electrical charge. With one hand on
the handle of one strip and the other on the handle of the second strip,
quickly pull the two strips apart. You’ll find that they’re now both
charged. They once again are attracted to your hands. But, do they still
repel each other? No, they now attract each other. They are charged, but
they are no longer charged alike. They have opposite charges and attract
each other.
Is tape the only object that you can charge? Once again, stick one
strip of tape to the desk and the second strip on top. Label the bottom
strip B and the top strip T. Pull the pair off together. Discharge them,
then pull them apart. Stick the handle end of each strip to the edge of a
table, the bottom of a lamp shade, or some similar object. The two
should hang down a short distance apart, as shown in Figure 20–2b.
Finally, rub the comb or pen on your clothing and bring it near first one
strip of tape and then the other. You will find that one strip will be
attracted to the comb, the other repelled from it. You can now explore
the interactions of charged objects with the strips of tape.
a
b
FIGURE 20–2 Strips of tape
can be given opposite charges
(a), then used to demonstrate
the interactions of like and
opposite charges (b).
20.1 Electrical Charge
463
Color Conventions
Experimenting with charge Try to charge other objects such as
• Positive charges are red.
charges
• Negative
are blue.
plates, glasses, and plastic bags. Rub them with different materials
such as silk, wool, and plastic wrap. If the air is dry, scuff your shoes
on the carpet and bring your finger near the strips of tape. You should
find that most charged objects attract one strip and repel the other. To
test silk or wool, slip a plastic bag over your hand before holding the
cloth. After rubbing, take your hand out of the bag and bring both the
bag and cloth near the strips of tape.
You will never find an object that repels both strips of tape, although
you might find some that attract both. Bring your finger near first one
strip, then the other. You will find that it attracts both. We will explore
this effect later in this chapter.
Types of charge From your experiments, you can make a list of
HELP WANTED
OFFICE EQUIPMENT
TECHNICIAN
Must be skilled in installing, servicing, and operating computers and
other office equipment.
Prefer graduate of twoyear course at a technical
institute or community
college. High school
courses should include
algebra and other math,
computer science, language arts, and physics
or chemistry. Growing
opportunity for those
with computer skills. May
work in a manufacturing
plant, a corporation, or
a repair shop. For more
information, join a computer user group or contact:
Institute of Electrical and
Electronics Engineers
445 Hoes Lane
Piscataway, NJ
08855-0459
464
Static Electricity
objects labeled B for bottom, which have the same charge as the tape
stuck on the desk. Another list can be made of objects labeled T, which
have the same charge as the tape stuck on the top of the other tape.
There are only two lists; thus, there are only two types of charge. You
could give these types the names “yellow” and “green.” Benjamin
Franklin called them positive and negative charges. Using Franklin’s
convention, when hard rubber and plastic are rubbed, they become
negatively charged. When materials such as glass and wool are rubbed,
they become positively charged.
Just as you showed that an uncharged pair of strips of tape became
oppositely charged, you were probably able to show that if you rubbed
plastic with wool, the plastic became charged negatively, the wool positively. The two kinds of charges were not created alone, but in pairs.
These experiments suggest that matter normally contains both charges,
positive and negative. Friction in some way separates the two. To explore
this further, you must consider the microscopic picture of matter.
A Microscopic View of Charge
Electrical charges exist within atoms. In 1890, J.J. Thomson discovered that all materials contain light, negatively charged particles he
called electrons. Between 1909 and 1911, Ernest Rutherford, a New
Zealander, discovered that atoms have a massive, positively charged
nucleus. If the positive charge of the nucleus exactly balances the negative charge of the surrounding electrons, then the atom is neutral.
With the addition of energy, the outer electrons can be removed from
atoms. An atom missing electrons has an overall positive charge, and
consequently any matter made of these electron-deficient atoms is positively charged. The freed electrons can remain unattached or become
attached to other atoms, resulting in negatively charged particles. From
a microscopic viewpoint, acquiring charge is a process of transferring
electrons.
;;;;;;
@@@@@@
€€€€€€
ÀÀÀÀÀÀ
;;;;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
;;;;;;
@@@@@@
€€€€€€
ÀÀÀÀÀÀ
;;;;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
;;;;;;
@@@@@@
€€€€€€
ÀÀÀÀÀÀ
;;;;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
;;;;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
;;;;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
;;;;;;;
@@@@@@@
€€€€€€€
ÀÀÀÀÀÀÀ
Hard rubber rod
Wool
–
+
+
–
+
– +– –
–
– – + – –+ – –
+ –
+
–
+
+
–
– +
+
+
–
–
+
+
+
–
+
+
FIGURE 20–3 As the rubber rod
strokes the wool, electrons are
removed from the wool atoms
and cling to the rubber atoms.
In this way, both objects become
charged.
Separation of charge If two neutral objects are rubbed together,
each can become charged. For instance, when rubber and wool are
rubbed together, electrons from atoms on the wool are transferred to the
rubber, as shown in Figure 20–3. The extra electrons on the rubber
result in a net negative charge. The electrons missing from the wool
result in a net positive charge. The combined total charge of the two
objects remains the same. Charge is conserved, which is one way of saying that individual charges are never created or destroyed. All that happened was that the positive and negative charges were separated
through a transfer of electrons.
Contact between the tires of a moving car or truck and the road can cause
the tires to become charged. Processes inside a thundercloud can cause the
cloud bottom to become negatively charged and the cloud top to become
positively charged. In both these cases, no charge is made, only separated.
Conductors and Insulators
Hold a plastic rod or comb at its midpoint and rub only one end. You
will find that only the rubbed end becomes charged. In other words, the
charges you transferred to the plastic stayed where they were put, they did
not move. Figure 20–4 shows static charges—charges that are not moving—on an insulator. The strips of tape that you charged earlier in this
chapter acted in the same way. Materials through which charges will not
move easily are called electrical insulators. Glass, dry wood, most plastics,
cloth, and dry air are all good insulators.
Suppose that you support a metal rod on an insulator so that it is
isolated, or completely surrounded by insulators. If you then touch the
charged comb to one end of the metal rod, you will find that the charge
spreads very quickly over the entire rod. Materials such as metals that allow
charges to move about easily are called electrical conductors. Electrons
FIGURE 20–4 A piece of plastic
0.02 mm wide was given a net
positive charge. Areas of negative
charge are visible as dark
regions. Areas of positive charge
are visible as yellow regions.
20.1 Electrical Charge
465
+
++ ++
+
+
+
+
+
+
++ ++
+
a
Conductor
+
When air becomes a conductor Air is an insulator. However, under
+ ++
+
+
+
b
Insulator
FIGURE 20–5 Charges placed
on a conductor will spread over
the entire surface (a). Charges
placed on an insulator will remain
where they are placed (b).
20.1
carry, or conduct, electric charge through the metal. Metals are good conductors because at least one electron on each atom of the metal can be
removed easily. These electrons act as if they no longer belong to any one
atom, but to the metal as a whole; consequently, they move freely throughout the piece of metal. Figure 20–5 illustrates how charges behave when
placed on a conductor or an insulator. Copper and aluminum are both
excellent conductors and are used commercially to carry electricity.
Plasma, a highly ionized gas, and graphite, the form of carbon used in pencils, also are good conductors of electrical charge.
certain conditions, sparks or lightning occurs, allowing charge to move
through air as if it were a conductor. The spark that jumps between your
finger and a doorknob after you have rubbed your feet on the carpet discharges you. That is, you have become neutral because the excess charges
have left you. Similarly, lightning discharges a thundercloud. In both these
cases, for a brief moment, air became a conductor. Recall that conductors
must have charges that are free to move. For a spark or lightning to occur,
free moving charged particles must be formed in the normally neutral air.
In the case of lightning, excess charges in the cloud and on the ground are
great enough to remove electrons from the molecules in the air. The
electrons and positively or negatively charged atoms become free to move.
They form a conductor that is a plasma. The discharge of Earth and the
thundercloud moving through this conductor forms a luminous arc called
lightning. In the case of your finger and the doorknob, the discharge is
called a spark.
Section Review
When the rods were longer than 293
feet, the silk broke. Gray replaced the
silk with stronger wires made of brass,
but then the experiments failed. The
metal rods would no longer transmit
a charge from one end to the other.
Why not?
1. How could you find out which strip
of tape, B or T, is positively charged?
2. Suppose you attach a long metal rod
to a plastic handle so that the rod is
isolated. You touch a charged glass
rod to one end of the metal rod.
Describe the charges on the metal rod.
3. In the 1730s, Stephan Gray tried to
see how far metal rods could conduct
electrical charge. He hung metal rods
by thin silk cords from the ceiling.
466
Static Electricity
4.
Critical Thinking Suppose there were a
third type of charge. What experiments
could you suggest to explore its
properties?
What’s the charge?
Problem
Can you see the effects of electrostatic charging? How can you increase the amount of
charge on an object without discharging it?
Materials
30 cm 30 cm block of polystyrene
22-cm aluminum pie pan
wool
plastic cup
thread
drinking straw
transparent tape
pith ball (or small piece of plastic foam
packing material)
liquid graphite
Procedure
1. Paint the pith ball with graphite and allow
it to dry.
2. Tape the inverted cup to the aluminum pie
pan. Secure the straw to the top of the cup
and use the thread to attach the ball as
shown in the photograph.
3. Rub the foam with wool, then remove
the wool.
4. Holding onto the plastic cup, lower the pie
pan until it is about 3 cm above the foam
block and then slowly lift it away.
5. Place the pie pan directly on the charged
foam block and lift it away.
6. Bring your finger near the ball until
they touch.
7. Place the pie pan on the foam block and
touch the edge of the pie pan with your
finger. Then remove the pie pan from the
foam block and touch the ball again with
your finger.
8. Repeat step 7 several times without
recharging the foam block.
Data and Observations
Description of Event
Observations
9. When finished, recycle or dispose of
appropriate materials. Put away materials
that can be reused.
Analyze and Conclude
1. Forming a Description As the pie pan
was brought near the charged block, could
you detect a force between the neutral pie
pan and the charged foam? Describe it.
2. Interpreting Observations Explain what
happened to the ball in step 4 and step 5.
3. Analyzing Results Make a drawing to
show the distribution of charges on the
neutral pie pan as it is lowered toward the
charged foam block.
4. Inferring Relationships What was the
reason for using the ball on a thread?
Explain the back-and-forth motion of the
ball in step 6.
5. Interpreting Observations Does the
polystyrene block seem to run out of
charges in step 8?
Apply
1. Clear plastic wrap is sold to seal up containers of food. Suggest a reason why it
clings to itself.
20.1 Electrical Charge
467
20.2
Electrical Force
E
lectrical forces must be strong because they can
easily produce accelerations larger than the acceleration caused by gravity. We also have seen that they can
be either repulsive or attractive while gravitational forces are always
attractive. Many scientists made attempts to measure electrical force.
Daniel Bernoulli, otherwise known for his work on fluids, made some
crude measurements in 1760. In 1770, Henry Cavendish showed that electrical forces must obey an inverse square force law, but, being extremely
shy, he did not publish his work. His manuscripts were discovered over a
century later, after all his work had been duplicated by others.
OBJ ECTIVES
• Summarize the relationship between forces
and charges.
•
Describe how an
electroscope detects
electric charge.
•
Explain how to charge by
conduction and induction.
•
Use Coulomb’s law to
solve problems relating to
electrical force.
•
Develop a model of how
charged objects can attract
a neutral object.
Forces on Charged Bodies
FIGURE 20–6 A charged rod,
when brought close to another
suspended rod, will attract or
repel the suspended rod.
+++
a
468
The forces you observed on tape strips also can be demonstrated by
suspending a negatively charged hard rubber rod so that it turns easily,
as shown in Figure 20–6. If you bring another negatively charged rod
near the suspended rod, it will turn away. The negative charges on the
rods repel each other. It is not necessary for the rods to make contact;
the force, called the electrical force, acts over a distance. If a positively
charged glass rod is suspended and a similarly charged glass rod
is brought close, the two positively charged rods also will repel each
other. If a negatively charged rod is brought near the positively charged
rod, however, the two will attract each other, and the suspended rod will
turn toward the oppositely charged rod. The results of your tape experiments and these observations with charged rods can be summarized in
this way:
• There are two kinds of electrical charges, positive and negative.
• Charges exert force on other charges over a distance.
• The force is stronger when the charges are closer together.
• Like charges repel; opposite charges attract.
–
––
b
Static Electricity
+++
–
––
– ––
++
c
Neither a strip of tape nor a large rod hanging in open air is a very sensitive or convenient way of determining charge. Instead, a device called
an electroscope is used. An electroscope consists of a metal knob connected by a metal stem to two thin, lightweight pieces of metal foil
called leaves, as shown in Figure 20–7. Note that the leaves are
enclosed to eliminate stray air currents.
Charging by conduction When a negatively charged rod is touched
to the knob of an electroscope, negative charges (electrons) are added to
the knob. The charges spread over all the metal surfaces. As shown in
Figure 20–8a, the two leaves are charged negatively and repel each
other, causing them to spread apart. The electroscope has been given a
net charge. Charging a neutral body this way, by touching it with a
charged body, is called charging by conduction.
The leaves also will spread if the electroscope is charged positively.
How, then, can you find out whether the electroscope is charged positively or negatively? The type of charge can be determined by observing
what happens to the spread leaves if a rod of known charge is brought
close to the knob. The leaves will spread farther apart if the electroscope
has the same charge as that of the rod, as shown in Figure 20–8b. The
leaves will fall slightly if the electroscope has a charge opposite to that
of the rod, as in Figure 20–8c.
Knob
Insulator
Leaves
FIGURE 20–7 An electroscope
is a device used for detecting
electrical charges.
Separation of charge on neutral objects Earlier in the chapter,
when you brought your finger near either charged strip of tape, the tape
was attracted toward your finger. Your finger, however, was not charged;
it was neutral and had equal amounts of positive and negative charge.
You know that in materials that are conductors, charges can move easily, and that in the case of sparks, electric forces can change insulators
into conductors. Given this information, you can develop a plausible
model for the force your finger exerted on the charged objects.
– ––
–––––– –
–
–
–––
–
–
–– ––
–– –––
– ––
–– ––
–
a
+ ++
+ +++ +
+
––––––
b
––
–– ––
c
FIGURE 20–8 A negatively
charged electroscope will have its
leaves spread (a). A negatively
charged rod pushes electrons
down to the leaves, causing them
to spread more (b). A positively
charged rod attracts some of the
electrons from the leaves, causing them to spread apart less (c).
20.2 Electrical Force
469
Sky Light
➥ Answers question from
page 460.
Suppose you move your finger, or any other uncharged object, close
to a positively charged object. The negative charges in your finger will be
attracted to the positively charged object, and the positive charges in
your finger will be repelled. Your finger will remain neutral, but the positive and negative charges will be separated. The electrical force is
stronger for the charged objects that are closer together, therefore, the
separation results in an attractive force between the neutral object and
the charged object. The force of a charged comb on your hair or on
neutral pieces of paper is the result of the same process, the separation
of charge.
The negative charges at the bottom of thunderclouds also can cause
charge separation in Earth. Positive charges in the ground are attracted
to Earth’s surface under the cloud. The forces of the charges in the cloud
and those on Earth’s surface can break molecules apart, separating the
positively and negatively charged particles. These charged particles are
free to move, and they establish a conducting path from the ground to
the cloud. Travelling at 500 000 kilometers per hour, a lightning bolt
courses through the sky to discharge the cloud.
Charging by induction Charge separation can be used to charge an
object without touching it. Suppose that a negatively charged rod is
brought close to one of two identical insulated metal spheres that are
touching, as in Figure 20–9b. Electrons from the first sphere will be
forced onto the sphere farther from the rod and will make it negatively
charged. The closer sphere is now positively charged. If the spheres are
separated while the rod is nearby, each sphere will have a charge, and
the charges will be equal but opposite, as shown in Figure 20–9c. This
process is called charging by induction.
Coulomb’s Law
You have seen that charges push and pull on each other. That is,
a force acts between two or more charged objects. How does this
force depend on the size of the charges and their separation? You
–
– ––
––
– +
+ –
– +
FIGURE 20–9 Start with neutral
spheres that are touching (a),
bring a charged rod near them
(b), and then separate the
spheres and remove the charged
rod (c). This is one example of
charging by induction.
470
Static Electricity
a
– +
+
–
+ –
+
+
+
+ +
+
b
–
– –
–
–
–
+
c
+
+
+
+ +
–
– –
–
–
–
demonstrated in your experiments with tape some basic properties. You
found that the force depends on distance. The closer you brought the
charged rod to the tape, the stronger the force. You also found that the
more you charged the rod, the stronger the force. But how can you vary
the quantity of charge in a controlled way? This problem was solved in
1785 by French physicist Charles Coulomb (1736–1806). The type of
apparatus used by Coulomb is shown in Figure 20–10. An insulating
rod with small conducting spheres, A and A’, at each end was suspended
by a thin wire. A similar sphere, B, was placed in contact with sphere A.
When they were touched with a charged object, the charge spread
evenly over the two spheres. Because they were the same size, they
received equal amounts of charge. The symbol for charge is q. Therefore,
the amount of charge on the spheres can be represented by the notation
qA and qB.
Coulomb found how the force between the two charged spheres, A
and B, depended on the distance. First, he carefully measured the
amount of force needed to twist the suspending wire through a given
angle. He then placed equal charges on spheres A and B and varied the
distance, d, between them. The force moved A from its rest position,
twisting the suspending wire. By measuring the deflection of A,
Coulomb could calculate the force of repulsion. He showed that the
force, F, varied inversely with the square of the distance between the
centers of the spheres.
1
F d2
To investigate the way in which the force depended on the amount of
charge, Coulomb had to change the charges on the spheres in a measured way. Coulomb first charged spheres A and B equally, as before.
Then he selected an extra uncharged sphere, C, the same size as sphere
B. When C was placed in contact with B, the spheres shared the charge
that had been on B alone. Because the two were the same size, B now
had only half its original charge. Therefore, the charge on B was only
one half the charge on A. The extra sphere was then removed. After
Coulomb adjusted the position of B so that the distance, d, between
A and B was the same as before, he found that the force between A and
B was half of its former value. That is, he found that the force varied
directly with the charge of the bodies.
F qAqB
After many similar measurements, Coulomb summarized the
results in a law now known as Coulomb’s law: the magnitude of the
force between charge qA and charge qB, separated a distance d, is proportional to the magnitude of the charges and inversely proportional to
the square of the distance.
q qB
F A
d2
Thin wire
A‘
A
B
Charged
spheres
B
A
d
Deflection of A
FIGURE 20–10 Coulomb used
this type of apparatus to measure
the force between two spheres, A
and B. He observed the deflection
of A while varying the distance
between A and B.
Pocket Lab
Charged Up
Rub a balloon with wool.
Touch the balloon to the knob
of an electroscope and watch
the leaves.
Analyze and Conclude
Describe the result. Make a
drawing to explain the result.
Touch the knob of the electroscope to make the leaves fall.
Would you expect that the wool
could move the leaves? Why?
Try it. Explain your results.
20.2 Electrical Force
471
Pocket Lab
Reach Out
Start with the leaves of an
electroscope down. Predict
what should happen if you
bring a charged balloon near
(but not touching) the top of
the electroscope.
Analyze and Conclude
Explain your prediction. Try it.
Describe and explain your results.
The unit of charge: The coulomb The amount of charge an object
has is difficult to measure directly. Coulomb, however, showed that the
quantity of charge could be related to force. Thus, he could define a
standard quantity of charge in terms of the amount of force it produces.
The SI standard unit of charge is called the coulomb (C). One coulomb
is the charge of 6.25 1018 electrons or protons. Recall that the charge
of protons and electrons is equal. The charge that produces a large lightning bolt is about 10 coulombs. The charge on an individual electron is
only 1.60 1019 C. The magnitude of the charge of an electron is
called the elementary charge. Thus, as you will calculate in problem 22
in the Chapter Review, even small pieces of matter, such as the coins in
your pocket, contain up to 1 million coulombs of negative charge. This
enormous amount of charge produces almost no external effects
because it is balanced by an equal amount of positive charge. However,
if the charge is unbalanced, even as small of a charge as 109 C can
result in large forces.
According to Coulomb’s law, the magnitude of the force on charge qA
caused by charge qB a distance d away can be written as follows.
Coulomb’s Law
FIGURE 20–11 The rule for
determining direction of force is
like charges repel, unlike charges
attract.
A
F B on A
+
a
A
+
F B on A
b
472
Static Electricity
q qB
F K A
d2
When the charges are measured in coulombs, the distance is measured in meters, and the force is measured in newtons, the constant, K,
is 9.0 109 Nm2/C2.
This equation gives the magnitude of the force that charge qA exerts
on qB and also the force that qB exerts on qA. These two forces are equal
in magnitude but opposite in direction. You can observe this example
of Newton’s third law of motion in action when you bring two strips of
tape with like charges together. Each exerts forces on the other. If you
bring a charged comb near either strip of tape, the strip, with its small
mass, moves readily. The acceleration of the comb and you is, of course,
much less because of the much greater mass.
The electrical force, like all other forces, is a vector quantity. Force vectors need both a magnitude and a direction. However, Coulomb’s law
will furnish only the magnitude of the force. To determine the direction,
you need to draw a diagram and interpret charge relations carefully.
Consider the direction of force on
a positively charged object called
A. If another positively charged
B
object, B, is brought near, the force
F A on B
+
on A is repulsive. The force, FB on A,
acts in the direction from B to A, as
shown in Figure 20–11a. If,
instead, B is negatively charged,
B
the force on A is attractive and acts
F A on B
–
in the direction from A to B, as
shown in Figure 20–11b.
Laser Printers
Static electricity is important to the operation of laser printers.
Inside a laser printer, static electrical charges are used to transfer a
black powder, commonly called toner, onto paper to create images or
text. Letters and other shapes are actually composed of tiny dots of toner
that are heat-bonded onto the paper. The dots are so numerous and placed
so closely together that they merge to form very finely detailed images.
1
2
4
Light source
The drum is rotated so that it contacts uncharged toner particles.
Toner contains small plastic beads
coated in graphite. As the drum
passes by the toner, the beads are
attracted to the charged areas.
5
A sheet of paper that is being
pushed by rollers through the
printer’s paper train receives a
small opposite charge. The paper
passing by the rotating drum
electrically attracts the toner.
Toner
3
Dru
The surface of the metal drum is coated
with a photosensitive semiconductor. In
dark, the semiconductor is an insulator.
As the drum rotates, it is sprayed with electrons, giving the surface a negative charge.
According to instructions received
from the processor, a beam of light
sweeps over the surface of the drum.
Wherever the light strikes, the semiconductor becomes a conductor,
and charges leak onto the supporting drum. These uncharged areas on
the semiconductor correspond to the
white portions of the page.
Processor
2
m
3
1
The computer sends instructions to the
microprocessor that operates the laser
printer. The microprocessor controls the
aiming and timing of a light source, either
a laser or a light-emitting diode (LED).
4
7
6
5
6
After picking up toner
from the drum, the
paper moves into the
fusing system. Here the
paper is exposed to heat
and pressure that melts
the grains of toner and
binds them to the paper.
7
The drum is returned
to the dark where it is
an insulator. The surfaces are recharged
and are ready to
receive the image of
another page.
Thinking Critically
1. Photocopiers also use
toner, a photosensitive
drum, and fusing system. Describe what you
think might be some of
the similarities and differences of photocopiers
and laser printers?
2. In the process, notice
that the areas exposed
to laser light become
the white part of a
page. Design a process
where the exposed
areas become the black
part of a page.
20.2 Electrical Force
473
Electrical Force Problems
1. Sketch the system showing all distances and angles to scale.
2. Diagram the vectors of the system; include derived vectors
using dashed lines.
3. Use Coulomb’s law to find the magnitude of the force.
4. Use your diagram along with trigonometric relations to find
the direction of the force.
5. Perform all algebraic operations on units as well as the numbers. Make sure the units match the variable in question.
6. Consider the magnitude of your answer. Is it reasonable?
Notice in this problem solving strategy that Coulomb’s law only is
used to determine magnitudes. Therefore, it is unnecessary to include
the sign of the charges or distance when evaluating Coulomb’s law,
because the answer is always positive.
Example Problem
Coulomb’s Law
Two charges are separated by 3.0 cm. Object A has a charge of 6.0 C,
while object B has a charge of 3.0 C. What is the force on object A?
Sketch the Problem
•
•
•
•
+x
Establish coordinate axes.
Label spheres A and B.
Draw distance dAB.
Diagram the force vectors.
A
qA
dAB
B
qB
FB on A
A
Calculate Your Answer
Known:
qA 6.0 C
qB 3.0 C
dAB 0.030 m
Unknown:
FB on A ?
Strategy:
Use Coulomb’s law. Do
not include signs when
using Coulomb’s law.
The direction of force is
determined by the
diagram.
Calculations:
q qB
FB on A K A
dAB2
(6.0 C)(3.0 C)
FB on A (9.0 109 Nm2/C2) (3.0 102 m)2
FB on A 1.8 102 N, x direction
Check Your Answer
• Are the units correct? Perform algebra on the units to ensure that
your answer is in newtons.
• Does the direction make sense? It agrees with the coordinate axis
and direction of push of charge B.
474
Static Electricity
• Is the magnitude realistic? Look at the magnitudes in the equation
109 106 106 102 102 101. This is close to the
answer, so the magnitude checks.
Example Problem
Coulomb’s Law with Three Charges
A sphere with charge 6.0 C is located near two other charged
spheres. A 3.0-C sphere is located 4.00 cm to the right and a 1.5-C
sphere is located 3.00 cm directly underneath. Determine the net force
on the 6.0-C sphere.
+y
Sketch the Problem
• Establish coordinate axes.
• Draw the displacement vectors.
• Diagram the force vectors.
dAB
A
+x
dAC
C
qA
FC on A
B
Fnet
␪
A
qB
FB on A
qC
Calculate Your Answer
Known:
qA 6.0 C
qB 3.0 C
qC 1.5 C
dAB 0.0400 m
dAC 0.0300 m
Unknown:
FB on A ?
FC on A ?
Fnet ?
Strategy:
Use Coulomb’s law.
Do not include
signs when using
Coulomb’s law (refer
to the problemsolving strategy).
The direction of
force is determined
by the diagram.
Use the tangent
function to find .
Use the Pythagorean
theorem to find Fnet.
Calculations:
(6.0 C)(3.0 C)
qAqB
FB on A K (9.0 GNm2/C2) 2
(4.00 102 m)2
dAB
FB on A 1.0 102 N, to the right
(6.0 C)(1.5 C)
K qAqC
(9.0 GNm2/C2) FC on A 2
(3.00 102 m)2
dAC
FC on A 9.0 101 N, up
FC on A
9.0 101 N
, 42°
tan FB on A
1.0 102 N
Fnet (1.0
102 N
)2 (9.0
101 N)2 130 N
Fnet 130 N, 42° above x-axis
Check Your Answer
• Are the units correct? Perform algebra
on the units to ensure that your answer is in newtons.
• Does the direction make sense? It agrees with direction of force of
the charge.
• Is the magnitude realistic? A magnitude of 130 N fits with the
quantities given.
20.2 Electrical Force
475
Practice Problems
1. A negative charge of 2.0 104 C and a positive charge of
8.0 104 C are separated by 0.30 m. What is the force between
the two charges?
2. A negative charge of 6.0 106 C exerts an attractive force of
65 N on a second charge 0.050 m away. What is the magnitude
of the second charge?
3. Two positive charges of 6.0 C are separated by 0.50 m. What
force exists between the charges?
4. An object with charge 7.5 107 C is placed at the origin. The
position of a second object, charge 1.5 107 C, is varied
from 1.0 cm to 5.0 cm. Draw a graph of the force on the object
at the origin.
5. The charge on B in the second Example Problem is replaced by
3.00 C. Use graphical methods to find the net force on A.
a
Application of Electrical Forces
b
FIGURE 20–12 Static electricity
precipitators are used to reduce
the fly ash released into the environment. In (a) the device is off,
in (b) it is on.
20.2
There are many applications of electrical forces on neutral particles. For
example, these forces can collect soot in smokestacks, thereby reducing
air pollution, as shown in Figure 20–12. Tiny paint droplets, charged by
induction, can be used to paint automobiles and other objects very uniformly. Photocopy machines use static electricity to place black toner on
a page so that a precise reproduction of the original document is made.
Section Review
1. How are force and charge related?
Describe the force if the charges are
the same charge. Opposite charges?
2. When an electroscope is charged, the
leaves rise to a certain angle and remain
at that angle. Why don’t they rise farther?
3. Two charged spheres are on a frictionless
horizontal surface. One has a 3 C
charge, the other a 6 C charge. Sketch
the two spheres, showing all forces on
them. Make the length of your force arrows
proportional to the strength of the forces.
476
Static Electricity
4. Identify electrical forces around you. How
could you demonstrate their existence?
5.
Critical Thinking Suppose you are testing
Coulomb’s law using a small, positivelycharged plastic sphere and a large,
positively-charged metal sphere. According
to Coulomb’s law, the force depends on
1/d2, where d is the distance between the
centers of the spheres. As the spheres get
close together, the force is smaller than
expected from Coulomb’s law. Explain.
CHAPTER
20 REVIEW
Summary
Key Terms
20.1
• electrostatics
• neutral
• insulator
• conductor
20.2
• electroscope
• charging by
conduction
• charging by
induction
• Coulomb’s law
• coulomb
• elementary
charge
20.1 Electrical Charge
• There are two kinds of electrical charge,
•
•
•
•
positive and negative. Like charges
repel; unlike charges attract.
Electrical charge is not created or
destroyed; it is conserved.
Objects can be charged by the transfer
of electrons.
Charges added to one part of an insulator remain on that part.
Charges added to a conductor quickly
spread over the surface of the object.
20.2 Electrical Force
• When an electroscope is charged, electrical forces cause its thin metal leaves
to spread.
• An object can be charged by conduction by touching a charged object to it.
• To charge an object by induction, a
charged object is first brought nearby,
causing a separation of charges. Then
the object to be
charged is separated,
trapping opposite charges on the
two halves.
• Coulomb’s law states that the force
between two charges varies directly
with the product of their charge and
inversely with the square of the distance between them.
• The SI unit of charge is the coulomb.
One coulomb (C) is the magnitude of
the charge of 6.25 1018 electrons or
protons. The elementary charge, the
charge of the proton or electron, is
1.60 1019 C.
Key Equation
20.2
q qB
F K A
d2
Reviewing Concepts
Section 20.1
1. If you comb your hair on a dry day,
the comb can become positively
charged. Can your hair remain
neutral? Explain.
2. List some insulators and conductors.
3. What property makes metal a good
conductor and rubber a good insulator?
Section 20.2
4. Why do socks taken from a clothes
dryer sometimes cling to other clothes?
5. If you wipe a stereo record with a
clean cloth, why does the record then
attract dust?
6. The combined charge of all electrons
in a nickel is hundreds of thousands
of coulombs. Does that imply anything about the net charge on the
coin? Explain.
7. How does the distance between
two charges impact the force between
them? If the distance is decreased
while the charges remain the same,
what happens to the force?
8. Explain how to charge a conductor
negatively if you have only a
positively charged rod.
Applying Concepts
9. How does the charge of an electron
differ from the charge of a proton?
10. Using a charged rod and an electroscope, how can you find whether
or not an object is a conductor?
11. A charged rod is brought near a pile of
tiny plastic spheres. Some of the spheres
are attracted to the rod, but as soon as
they touch the rod, they fly away in
different directions. Explain.
Chapter 20 Review
477
CHAPTER 20 REVIEW
12. Lightning usually occurs when a negative charge
in a cloud is transported to Earth. If Earth is neutral, what provides the attractive force that pulls
the electrons toward Earth?
13. Explain what happens to the leaves of a positively charged electroscope when rods with the
following charges are nearby but not touching
the electroscope.
a. positive
b. negative
14. Coulomb’s law and Newton’s law of universal
gravitation appear to be similar. In what ways
are the electrical and gravitational forces similar? How are they different?
15. The text describes Coulomb’s method for
obtaining two charged spheres, A and B, so that
the charge on B was exactly half the charge on
A. Suggest a way Coulomb could have placed a
charge on sphere B that was exactly one third
the charge on sphere A.
16. Coulomb measured the deflection of sphere A
when spheres A and B had equal charges and
were a distance d apart. He then made the
charge on B one third the charge on A. How far
apart would the two spheres then have to be
for A to have the same deflection it had before?
17. Two charged bodies exert a force of 0.145 N on
each other. If they are moved so that they are
one fourth as far apart, what force is exerted?
18. The constant, K, in Coulomb’s equation is much
larger than the constant, G, in the universal gravitation equation. Of what significance is this?
19. Electrical forces between charges are enormous
in comparison to gravitational forces. Yet we
normally do not sense electrical forces between
us and our surroundings, while we do sense
gravitational interactions with Earth. Explain.
Problems
Section 20.2
20. Two charges, qA and qB, are separated by a
distance, d, and exert a force, F, on each
other. Analyze Coulomb’s law and identify
what new force will exist if
a. qA is doubled.
b. qA and qB are cut in half.
c. d is tripled.
d. d is cut in half.
e. qA is tripled and d is doubled.
478
Static Electricity
21. How many excess electrons are on a ball with
a charge of 4.00 1017 C?
22. How many coulombs of charge are on the electrons in a nickel? Use the following method to
find the answer.
a. Find the number of atoms in a nickel. A
nickel has a mass of about 5 g. Each mole
(6.02 1023 atoms) has a mass of about 58 g.
b. Find the number of electrons in the coin.
A nickel is 75% Cu and 25% Ni, so each
atom on average has 28.75 electrons.
c. Find how many coulombs of charge are on
the electrons.
23. A strong lightning bolt transfers about 25 C
to Earth.
a. How many electrons are transferred?
b. If each water molecule donates one electron, what mass of water lost an electron
to the lightning? One mole of water has a
mass of 18 g.
24. Two electrons in an atom are separated by
1.5 1010 m, the typical size of an atom.
What is the electrical force between them?
25. A positive and a negative charge, each of
magnitude 1.5 105 C, are separated by a
distance of 15 cm. Find the force on each of
the particles.
26. Two negatively charged bodies, each charged
with 5.0 105 C, are 0.20 m from each
other. What force acts on each particle?
27. How far apart are two electrons if they exert a
force of repulsion of 1.0 N on each other?
28. A force of 4.4 103 N exists between a
positive charge of 8.0 104 C and a negative charge of 3.0 104 C. What distance
separates the charges?
29. Two identical positive charges exert a repulsive force of 6.4 109 N when separated by
a distance of 3.8 1010 m. Calculate the
charge of each.
30. A positive charge of 3.0 C is pulled on
by two negative charges. One, 2.0 C,
is 0.050 m to the north and the other,
4.0 C, is 0.030 m to the south. What
total force is exerted on the positive charge?
31. Three particles are placed in a line. The left
particle has a charge of 67 C, the middle,
45 C, and the right, 83 C. The middle
CHAPTER 20 REVIEW
particle is 72 cm from each of the others, as
shown in Figure 20–13.
a. Find the net force on the middle particle.
b. Find the net force on the right particle.
+ 45 C
–67 C
– 83 C
72 cm
vertical. The ball is in equilibrium with FE, Fg,
and FT. Calculate each of the following.
a. Fg
b. FE
c. the charge on the balls
72 cm
30.0°
FIGURE 20–13
FE
Extra Practice For more
practice solving problems, go
to Extra Practice Problems,
Appendix B.
FIGURE 20–15
3.0 cm
Going Further
Critical Thinking Problems
32. Three charged spheres are located at the positions shown in Figure 20–14. Find
the total force on sphere B.
y
A
4.5 C
+
4.0 cm
B –8.2 C
–
x
3.0 cm
C
+
+6.0 C
FIGURE 20–14
33. Two charges, qA and qB, are at rest near a
positive test charge, qT, of 7.2 C. The first
charge, qA, is a positive charge of 3.6 C,
located 2.5 cm away from qT at 35°; qB is a
negative charge of 6.6 C, located 6.8 cm
away at 125°.
a. Determine the magnitude of each of the
forces acting on qT.
b. Sketch a force diagram.
c. Graphically determine the resultant force
acting on qT.
34. The two pith balls in Figure 20–15 each have a
mass of 1.0 g and equal charge. One pith ball
is suspended by an insulating thread. The other
is brought to 3.0 cm from the suspended ball.
The suspended ball is now hanging with the
thread forming an angle of 30.0° with the
Using a Graphing Calculator Determine how
force depends on distance. A 1 C charge
is at x 8 mm, and a 1 C charge is at
x 8 mm. Find the force on a 1 C test
charge that is at x 10 mm. Use Coulomb’s
law to calculate the force. Repeat for 11 mm,
etc., until you reach 40 mm. Plot the force as a
function of distance. One way to explore how
the force depends on distance is to plot your
results on log-paper. You also can plot the
results on a calculator or computer. Use log
scales on both the x and y axes.
The slope of the line, m, indicates the power
to which x is raised. For example, if x changes
by a factor of 10 and y changes by a factor of
1/100, then the slope is m 2, and the force is
proportional to x2. If the slope is not constant,
then you cannot write an equation for the force
as xm. Over what range of distances is the slope
constant? What is its slope?
Essay Research and describe the historical development of the concept of electrical force.
PHYSICS
To review content, do the
interactive quizzes on the
Glencoe Science Web site at
science.glencoe.com
Chapter 20 Review
479
Download