Installation Manual
IX-DF-2RA (Video Door Station)
IX-SS-2RA (Audio Only Door Station)
This manual includes Product Liability Precautions. Provide this manual to
end user after installation.
Issue Date : November 2014 FK2122 A P1114 SQ 56142 Printed in Thailand
Introduction
Part Names and Accessories
• Read this manual before installation and connection.
Read the "Setting Manual" and "Operation Manual" included on the DVD-ROM that comes with the
Master Station (IX-MV).
• &RQ¿JXUHWKHV\VWHPVHWWLQJVDFFRUGLQJWRWKH6HWWLQJ0DQXDODIWHUFRPSOHWLQJWKHLQVWDOODWLRQ
DQGFRQQHFWLRQ7KHV\VWHPZLOOQRWIXQFWLRQXQOHVVLWKDVEHHQSURSHUO\FRQ¿JXUHG
• After installation, explain to the customer how to use the device, and be sure to provide the
DFFRPSDQ\LQJ'9'520WKDWFDPHZLWKWKH0DVWHU6WDWLRQ,;09
Microphone
Microphone
Communication
indicator (green)
Speaker
Status indicator (red)
Communication
indicator (green)
Speaker
Status indicator (red)
Reset button*
&$7HFDEOH
connections
Option connector input
Installation Manual
(this manual) x1
Chinese RoHS paper
x1
Special screwdriver
x1
LED for night illumination
• Perform the installation and connection only after fully understanding this device and the manual.
,OOXVWUDWLRQVXVHGLQWKLVPDQXDOPD\EHGLIIHUHQWIURPWKHDFWXDORQHV
([DPSOHRI6\VWHP&RQÀJXUDWLRQ
PC
(third party)
IX-MV
Network Video
Recorder
(third party)
PoE-enabled switch
(third party)
IX-DA
IX-BA
Front View
Front View
Warning
PoE-enabled switch
(third party)
IX-DF
IX-DF-HID*1
IX-DF-P*2
PoE-enabled switch
(third party)
Product name
IX-MV
Master Station
IX-DA, IX-DF, IX-DF-HID-I*1, IX-DF-HID*1, Video Door Station
IX-DF-2RA*1, IX-DF-PI*2, IX-DF-P*2
IX-BA, IX-SS, IX-SS-2RA*1
$XGLR2QO\'RRU6WDWLRQ
*11RUWK$PHULFDRQO\
*2 Except North America
*32QO\0DVWHU6WDWLRQVFDQEHUHJLVWHUHG0D[
Dismantling
or
alteration
3. .HHSWKHXQLWDZD\IURPZDWHURUDQ\
other liquid.
Fire or electric shock could result.
IX-DF-2RA
Number of station registrations
in address book
500 stations
20 stations*3
20 stations*
3
Indicators
Refer to the separate "IX-DA & IX-BA Operation Manual" for indicators other than those listed.
: Light ON
Status (Pattern)
: Light OFF
Explanation
Booting
0.75 sec
)DVWÀDVKLQJ
Device
error
0.25 sec
/RQJLQWHUYDOÀDVKLQJ
0.5 sec
Communication
failure
4 sec
/RQJLUUHJXODUÀDVKLQJ
1 sec
0.25 sec
0.25 sec
0.25 sec
0.25 sec
6KRUWLUUHJXODUÀDVKLQJ
1 sec
0.25 sec
0.25 sec
Front panel
Main unit
Back box
Side View
MAC Address
* Press and hold the reset
button for longer than 1
second, then release to
restart station.
Option connector
x1
Special Screw
x4
Back View
0.25 sec
Firmware
version
upgrading
Initializing
0.25 sec
6WDQGE\
Caution
4. The unit is not explosion-proof. Do not
LQVWDOORUXVHQHDUJDVHVRUÀDPPDEOH
materials.
Fire or explosion could result.
5. 'RQRWFRQQHFWDQ\WHUPLQDORQWKHXQLW
to an AC power line.
Fire or electric shock could result.
6. 'RQRWSXWDQ\PHWDORUÀDPPDEOH
material into the unit through the
openings.
Fire, electric shock, or unit trouble could
result.
Negligence could result in injury to people or damage to property.
1. 'RQRWLQVWDOORUPDNHDQ\ZLUH
WHUPLQDWLRQVZKLOHSRZHUVXSSO\LV
plugged in. It can cause electrical shock
or damage to the unit.
2. Before turning on power, make sure
wires are not crossed or shorted. If not,
¿UHRUHOHFWULFVKRFNFRXOGUHVXOW
3. 'RQRWLQVWDOOWKHXQLWLQDQ\RIWKH
following locations. Fire, electric shock,
or unit trouble could result.
• Places under direct sunlight or places
near heating equipment that varies in
temperature.
• Places subject to dust, oil, chemicals,
K\GURJHQVXO¿GHKRWVSULQJ
• Places subject to moisture and
KXPLGLW\H[WUHPHVVXFKDV
bathrooms, cellars, greenhouses, etc.
• Places where the temperature is quite
low, such as inside a refrigerated area
or in front of an air conditioner.
• Places subject to steam or smoke (near
heating or cooking surfaces).
• Where noise generating devices
such as dimmer switches or inverter
HOHFWULFDODSSOLDQFHVDUHFORVHE\
• /RFDWLRQVVXEMHFWWRH[WUHPHO\
SRZHUIXOHOHFWULF¿HOGV
4. When mounting the unit on a wall,
install the unit in a convenient location,
but not where it could be jarred or
EXPSHG,QMXU\FRXOGUHVXOW
5. Do not place or install the unit in the
locations subject to frequent vibration or
LPSDFW,IWKHXQLWIDOOVLQMXU\WRSHRSOH
or damage to the unit could result.
6. Do not run wires between movable
REMHFWVGRRUVZLQGRZVHWF,WPD\
cause malfunction.
7. 'RQRWSXWDQ\WKLQJRQWKHXQLWRUFRYHU
the unit with cloth, etc. Fire or unit
trouble could result.
8. Be sure to perform a call test or check
the chime volume with the handset on
WKHKRRN,I\RXRSHUDWHWKHKRRNVZLWFK
ZLWKWKHKDQGVHWRQ\RXUHDUDVXGGHQ
FDOOHWFPD\DUULYHFDXVLQJGDPDJHWR
\RXUHDU
Back Box
x1
Supplemental
2-pin connector
for latch reset x1
Negligence could result in death or serious injury.
1. Voltage is applied to parts within the
HTXLSPHQW'RQRWWRXFKDQ\SDUWVWKDWDUH
not associated with the installation, wiring,
or connection. Electric shock could result.
2. Do not dismantle or alter the unit.
Fire or electric shock could result.
J Number of station registrations in address book
0.25 sec
(PHUJHQF\FDOOEXWWRQ
Network Camera
(third party)
EMERGENCY
Status Red
1RUPDOÀDVKLQJ
indicator ÀDVKLQJ
0.75 sec
(PHUJHQF\FDOOEXWWRQ
Precautions
PoE-enabled switch
(third party)
Product number
Call button
IX-SS-2RA
LAN
PoE-enabled switch
(third party)
Call button
IX-DF-2RA
IX Support Tool
(included with IX-MV)
PoE-enabled switch
(third party)
Red
light
Camera angle adjustment
OHYHU9LGHR'RRU6WDWLRQRQO\
Camera
Important
Name
Accessories included
Call indicator (orange)
Call indicator (orange)
Instructions x1
Notice
1. $LSKRQHDVVXPHVQRUHVSRQVLELOLW\IRUGDPDJHVDVDUHVXOWRIGHOD\HGRUXQXVDEOHVHUYLFHVZKLFKZHUH
GXHWRIDLOXUHVLQQHWZRUNHTXLSPHQWFRPPXQLFDWLRQVHUYLFHVE\,QWHUQHWDQGFHOOXODUSKRQHFRPSDQLHVOLQH
interruptions, communication failures, or inaccuracies or omissions in the transmission unit.
2. :HZLOOXQGHUQRFRQGLWLRQVEHOLDEOHIRUGDPDJHWKDWRFFXUVGXHWRWKHLQDELOLW\WRFRPPXQLFDWHGXHWR
malfunctions, problems, or operational errors in this product.
3. ,ISHUVRQDOLQIRUPDWLRQOHDNHGE\HDYHVGURSSLQJRUXQDXWKRUL]HGDFFHVVLQWKHFRPPXQLFDWLRQSDWKVRYHU
WKH,QWHUQHWSOHDVHEHDZDUHWKDW$LSKRQHDVVXPHVQRUHVSRQVLELOLW\IRUWKHGDPDJHV
4. :HZLOOXQGHUQRFRQGLWLRQVEHOLDEOHIRUDQ\GDPDJHVRUORVVHVUHVXOWLQJIURPWKLVSURGXFW¶VFRQWHQWVRU
VSHFL¿FDWLRQV
5. 7KLVPDQXDOZDVFUHDWHGE\$LSKRQH&R/WGDOOULJKWVUHVHUYHG&RS\LQJDSDUWRIRUWKLVHQWLUHPDQXDO
ZLWKRXWSULRUSHUPLVVLRQIURP$LSKRQH&R/WGLVVWULFWO\IRUELGGHQ
6. 3OHDVHQRWHWKDWWKLVPDQXDOPD\EHUHYLVHGRUFKDQJHGZLWKRXWSULRUQRWLFH
7. 3OHDVHQRWHWKDWSURGXFWVSHFL¿FDWLRQVPD\EHFKDQJHGIRUWKHVDNHRILPSURYHPHQWZLWKRXWSULRUQRWLFH
8. 3OHDVHEHDZDUHWKDWLWLVWKHFXVWRPHU¶VUHVSRQVLELOLW\WRHQVXUHWKDWWKHLUFRPSXWHULVVHFXUH:HZLOOXQGHU
QRFRQGLWLRQVEHOLDEOHIRUVHFXULW\IDLOXUHV
9. 7KLVV\VWHPLVQRWLQWHQGHGIRUOLIHVXSSRUWRUFULPHSUHYHQWLRQ,WLVMXVWDVXSSOHPHQWDU\PHDQVRI
FRQYH\LQJLQIRUPDWLRQ$LSKRQHZLOOXQGHUQRFRQGLWLRQVEHOLDEOHIRUORVVRIOLIHRUSURSHUW\ZKLFKRFFXUV
ZKLOHWKHV\VWHPLVEHLQJRSHUDWHG
10. .HHSWKHXQLWPRUHWKDQP¶DZD\IURPUDGLRRU79VHW
11. Install the unit in an area that will be accessible for future inspections, repairs, and maintenance.
12. ,IWKHXQLWLVGRZQRUGRHVQRWRSHUDWHSURSHUO\XQSOXJWKHSRZHUVXSSO\RUWXUQRIIWKH32:(5VZLWFKHV
13. ,ILWLVXVHGFORVHWRDFHOOXODUSKRQHWKHXQLWPD\PDOIXQFWLRQ
14. The unit can be damaged if dropped. Handle with care.
15. The unit turns inoperative during power failure.
16. ,QDUHDVZKHUHEURDGFDVWLQJVWDWLRQDQWHQQDVDUHFORVHE\WKHLQWHUFRPV\VWHPPD\EHDIIHFWHGE\UDGLR
IUHTXHQF\LQWHUIHUHQFH
17. $WDJDWHRUSRUFKLOOXPLQDWHGE\DÀXRUHVFHQWODPSWKHSLFWXUHPD\YDU\EXWWKLVLVQRWDPDOIXQFWLRQ
18. ,IVWULSHVRU¿QHSDWWHUQVDUHUHÀHFWHGRXWOLQHVDQGFRORUVVKRZQPD\GLIIHUIURPDFWXDOSHRSOHRU
backgrounds, but this is not a malfunction.
19. :DUPFRORUOLJKWLQJVKLQLQJRQWKHYLGHRGRRUVWDWLRQPD\FKDQJHWKHWLQWRIWKHSLFWXUHRQWKHPRQLWRU
20. :KHQXVLQJÀXRUHVFHQWOLJKWVWRLOOXPLQDWHWKHVFUHHQLWVFRORUVPD\SHULRGLFDOO\FKDQJHFRORUUROOLQJEXW
this is not a malfunction.
21. 7KHXQLWFDVHPD\EHFRPHDZDUPZLWKXVHEXWWKLVLVQRWDXQLWPDOIXQFWLRQ
22. :DUPDLUÀRZLQJIURPLQVLGHPD\LQWHUDFWZLWKWKHWHPSHUDWXUHGLIIHUHQFHLQWKHRXWVLGHDLUWRFDXVH
FRQGHQVDWLRQWRRFFXURQWKHFDPHUDXQLW,WLVUHFRPPHQGHGWKDW\RXEORFNWKHSRLQWVIURPZKLFKZDUPDLU
LVÀRZLQJRXWVXFKDVLQFRPLQJOLQHSRUWVLQRUGHUWRSUHYHQWFRQGHQVDWLRQ
23. .HHSWKHLQWHUFRPZLUHVPRUHWKDQFP¶¶DZD\IURP$&9ZLULQJ$&LQGXFHGQRLVHDQGRU
unit malfunction could result.
24. 'RRUVWDWLRQLVZHDWKHUUHVLVWDQWEXWGRQRWVSUD\KLJKSUHVVXUHZDWHU8QLWWURXEOHFRXOGUHVXOW
25. Due to the nature of the camera built into the Video Door Station, external light and the surrounding
HQYLURQPHQWPD\DIIHFWWKHSURMHFWLRQTXDOLW\RIWKH79PRQLWRUVRSOHDVHDYRLGLQVWDOOLQJLQWKHIROORZLQJ
locations.
Where the sky can be seen
in the background
Sky
Where the background
is white
White
wall
Where direct sunlight
is present
How to Install
How to Connect
Connection Precautions
Installation of Door Station
148 mm
(5-13/16'')
Back box (included)
J Cable
The cable is not included with the product.
Front panel with the unit attached
About the CAT5e/6 cable
281 mm
(11-1/16'')
Loosen
Special screwdriver
(included)
Tighten
Cable precautions
• Use a straight cable when connecting between equipment.
• 'RQRWXVHD&$7HFDEOHZLWKDEHQGLQJDQJOHRIOHVVWKDQD
25 mm (1”) radius. A radius of less than 25 mm (1”) could cause a
communication failure.
CAT5e/6 cable
• Do not use separate conductors or twisted pair cables.
CAT5e/6 cable
• Do not use an odd number cable.
Mounting height (box center)
GL=1,500 mm (5')
Special screw x 4
(included)
2
1
Install the back box in the wall, and
then connect the CAT5e/6 cable
and option wires to the unit with the
terminal cover open.
Radius < 25 mm (1")
Radius ≥ 25 mm (1")
• 'RQRWSHHOWKHMDFNHWRIIWKH&$7HFDEOHDQ\PRUHWKDQLV
QHFHVVDU\
• $WWDFKWKH5-PRGXODUSOXJVXVLQJHLWKHU(,$7,$$RU%
45 mm
(1-3/4'')
Pair3
Pair2
Pair3
Fasten the front panel to the
back box with the special screws.
Pair1
Pair4
Pair2
• 7KH5-FRQQHFWRUZLWKFRYHUFDQQRWEHFRQQHFWHGWR&$7HFDEOH
WHUPLQDOVIRU0DVWHU6WDWLRQRU'RRU6WDWLRQV8VHFDEOHVZLWKRXWFRYHUV
on the connectors.
Pair1 Pair4
12345678
12345678
T568A
T568B
• 8VHWKH/$1WHVWHUWRFRQ¿UPFRQGXFWLRQEHIRUHFRQQHFWLQJWKH
CAT5e/6 cable.
,PDJLQJ5DQJHDQG0RXQWLQJ/RFDWLRQ,;')5$RQO\
• 'RQRWSXOOWKH&$7HFDEOHRUDSSO\H[FHVVLYHORDG
:LULQJ&RQQHFWLRQ
J Imaging Position Settings
The camera angle can be adjusted up or down (-8°, 0°, +15°) using the camera angle adjustment lever.
Set it to the optimal level.
IX-DF-2RA
IX-SS-2RA
Door Station
(Back)
Insulate and secure unused wires.
Camera angle adjustment lever
-8°
0°
IX-DA
+15°
ϕ0.8mm(20AWG)-2C
Contact Input*1
Polarized
Shielded wire
Audio Output*2
(to paging amplifier)
7KHLQGLFDWHGUDQJHLVDJXLGHOLQHWKDWPD\FKDQJHGHSHQGLQJRQWKHLQVWDOODWLRQHQYLURQPHQW
Vertical
Camera angle 0°
Camera angle +15°
Approx. 1,900 mm (6'3")
Approx. 1,900 mm (6'3")
Approx. 650 mm (2'2")
Approx. 1,250 mm (4'1" )
500
mm
(20")
Unit
center
Approx. 700 mm (2'3")
Approx. 1,200 mm (3'11")
1,500 mm (5')
500
mm
(20")
ϕ0.8mm(20AWG)-2C
3
Camera angle -8°
If lower due to a level difference
Approx. 1,950 mm (6'5")
Unit
Approx.
700 mm (2'3")
Unit
center
center
Approx. 1,250 mm (4'1" )
500
mm
(20") 1,500 mm (5')
1,300 mm (4'3")
150 mm (5")
Door Relay*
(such as the electric lock)
Horizontal
500 mm (20")
*1&RQWDFW,QSXW6SHFL¿FDWLRQV
Input method
Approx. 950 mm (3'1")
10BASE-T
100BASE-TX
CAT5e/6 straight (UTP)
Red
Orange
Green
Blue
Purple
S
Connector
PCB
P
P
NO
COM
NC
NO
C
NC
NO
C
NC
Brown
Red
0.8mm(20AWG)-2C
Brown
Red
Orange
Yellow
Latch Reset
*5
$X[5HOD\
*4
$X[5HOD\
*4
0.8mm(20AWG)-2C
Green
Blue
*3'RRU5HOD\2XWSXW6SHFL¿FDWLRQV
Output method
)RUP&GU\FRQWDFW12RU1&
Level detection method
Voltage between
the terminals
AC 24V, 0.5A (resistive load)
DC 24V, 0.5A (resistive load)
0LQLPXPORDG$&'&P9P$
Contact resistance 0D[LPXPFORVXUHUHVLVWDQFHȍRUOHVV
0LQLPXPRSHQUHVLVWDQFHNȍRUPRUH
*4$X[5HOD\2XWSXW6SHFL¿FDWLRQV
Terminal short-circuit 10 mA or less
current
Output method
)RUP&GU\FRQWDFW12RU1&
Voltage between
the terminals
Voltage between
the terminals
AC 24V, 0.5A (resistive load)
DC 24V, 0.5A (resistive load)
Minimum load (DC): 10 mV, 0.01 mA
DC 5V or less (between open terminals)
FCC
7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVWKLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFH
DQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ
1RWH7KLVHTXLSPHQWKDVEHHQWHVWHGDQGIRXQGWRFRPSO\ZLWKWKHOLPLWVIRUD&ODVV%GLJLWDOGHYLFHSXUVXDQWWR3DUWRIWKH)&&5XOHV
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
DQGFDQUDGLDWHUDGLRIUHTXHQF\HQHUJ\DQGLIQRWLQVWDOOHGDQGXVHGLQDFFRUGDQFHZLWKWKHLQVWUXFWLRQVPD\FDXVHKDUPIXOLQWHUIHUHQFHWRUDGLR
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
WRUDGLRRUWHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRIIDQGRQWKHQXVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKHLQWHUIHUHQFHE\
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•
&RQVXOWWKHGHDOHURUDQH[SHULHQFHGUDGLR79WHFKQLFLDQIRUKHOS
PoE-enabled switch
100 m (330')
SE
)RUP&GU\FRQWDFW12RU1&
Fixed detection time 200 msec or more
:KHQOLJKWHQWHUVWKHFDPHUDWKHPRQLWRUVFUHHQPD\ÀLFNHUEULJKWO\RUWKHVXEMHFWPD\EHFRPHGDUN7U\WRSUHYHQWVWURQJOLJKWLQJIURPHQWHULQJWKH
FDPHUDGLUHFWO\
Brown
Yellow
15 m (50')
J Wall Mounting
IX-BA
LAN/PoE
*2$XGLR2XWSXW6SHFL¿FDWLRQV
Output impedance
ȍ
Output audio level
300 mVrms ȍZKHQWHUPLQDWHG
*5/DWFK5HVHW6SHFL¿FDWLRQV
Input method
'U\FRQWDFW12
Contact resistance 0D[LPXPFORVXUHUHVLVWDQFHŸRUOHVV
Terminal shortcircuit current
10mA or less
Voltage between
the terminals
DC 5V or less (between open terminals)
Monitoring
OFF
OFF
OFF
Door Release State
1
2
3
4
ON
1
ON*
OFF
OFF
Door Release State
OFF
ON
ON
2
3
4
ON
1
2
3
4
ON
Monitoring
OFF
OFF
OFF
Door Release State
1
2
3
4
ON
Option Connector
Reset Connector “CN7”
• NO - yellow
• C - green
• NC - blue
Aux Relay 2
• NO - brown
• C - red
• NC - orange
Aux Relay 1
Aux Relay Outputs
DIP Switch “SW2”
Dip Switch “SW2” and Contact Locations
IX-DF-2RA / IX-SS-2RA Supplemental Instructions
Default Settings:
*Contact Input
Set to “Call”
2XWSXW6SHFLÀFDWLRQ Set to “Contact Input Call / Communication State”
OFF
ON
OFF
Call Button Emergency Button
Calling Talking Calling Talking
ON
OFF
ON
ON
ON
ON
ON
ON
OFF
DIP SWITCH “SW2” Settings (Relay PCB Dip Switch)
Door Relay State
AUX RY1 State
AUX RY2 State
Door Release Settings:
*Contact Input
Set to “Call”
2XWSXW6SHFLÀFDWLRQ Set to “Door Release”
DIP SWITCH “SW2” Settings (Relay PCB Dip Switch)
Call Button Emergency Button
Monitoring
Calling Talking Calling Talking
OFF
OFF
Door Relay State OFF
OFF
OFF
AUX RY1 State
ON
ON
ON
ON
ON
AUX RY2 State
OFF
ON
ON
OFF
OFF
*Door Release Operation Tone must be set to “Operation sound”.
Manual Reset Settings:
*Contact Input
Set to “Call”
2XWSXW6SHFLÀFDWLRQ Set to “Contact Input Call / Communication State”
DIP SWITCH “SW2” Settings (Relay PCB Dip Switch)
OFF
OFF
ON
Call Button Emergency Button
Monitoring
Door Release State
Calling Talking Calling Talking
Door Relay State OFF
ON
OFF
ON
OFF
OFF
AUX RY1 State
ON
ON
ON
ON
OFF
ON
AUX RY2 State
OFF
ON*
OFF
ON
OFF
OFF
*AUX RY2 remains “ON” (latched) until Reset Connector “CN7” on PCB is shorted.
Optional Settings:
*Contact Input
Set to “Call”
2XWSXW6SHFLÀFDWLRQ Set to “Contact Input Call / Communication State”
OFF
ON
OFF
Call Button Emergency Button
Calling Talking Calling Talking
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
DIP SWITCH “SW2” Settings (Relay PCB Dip Switch)
Door Relay State
AUX RY1 State
AUX RY2 State
Door Release & Manual Reset Settings:
*Contact Input
Set to “Call”
2XWSXW6SHFLÀFDWLRQ Set to “Door Release”
DIP SWITCH “SW2” Settings (Relay PCB Dip Switch)
Call Button Emergency Button
Monitoring
Door Release State
Calling Talking Calling Talking
Door Relay State OFF
OFF
OFF
OFF
ON*
OFF
AUX RY1 State
ON
ON
ON
ON
ON
OFF
OFF
AUX RY2 State
OFF
ON
ON**
OFF
OFF
*Door Release Operation Tone must be set to “Operation sound”.
**AUX RY2 remains “ON” (latched) until Reset Connector “CN7” on PCB is shorted.
1
2
3
4
ON
* &RQWDFW,QSXWDQG2XWSXW6SHFL¿FDWLRQLVVHWWRGHVLUHGVWDWHXVLQJWKH,;6XSSRUW7RROZKLOHSURJUDPPLQJWKHGRRUVWDWLRQ
IX-DF-2RA / IX-SS-2RA Supplemental Instructions
IX Support Tool
Figure 5
Figure 4
Figure 3
Figure 2
Figure 1
7KH,;(PHUJHQF\VWDWLRQLVWREHSURJUDPPHGWRFDOOGHVLJQDWHGPDVWHUVYLDWKHUHGPXVKURRPEXWWRQDWDKLJKHUSULRULW\7KH
PXVKURRPEXWWRQFDQFDOOGLIIHUHQWPDVWHUVWKDQWKHVWDQGDUGFDOOEXWWRQFDOOV7KLVSURFHGXUHVKRZVKRZWRVHWXSWKHHPHUJHQF\
FDOOEXWWRQRQO\6WDWLRQ$VVRFLDWLRQIRUDOOVWDWLRQVZLOOQHHGWREHGRQHSULRUWRFRPSOHWLQJWKHVHVWHSV5HIHUWRWKH,;6XSSRUW7RRO
6HWWLQJ0DQXDOIRUFRPSOHWHSURJUDPPLQJLQVWUXFWLRQV
8VHWKH,;6XSSRUW7RROLQWKH7DEOH9LHZ
7KHXVDJHIRUWKHFRQWDFWLQSXWRIWKHVWDWLRQZLOO
QHHGWREHVHWWRFDOO([SDQGContact / Audio
Output Settings and select Contact InputIURPWKH
PHQXRQWKHOHIW8VHWKHGURSGRZQXQGHU³8VDJH´
and select CallIRUWKHDSSURSULDWHVWDWLRQ¿JXUH
3UHVVWKH8SGDWHEXWWRQWRVDYHFKDQJHV
7KHFRQWDFWRXWSXWVSHFL¿FDWLRQVZLOOQHHGWREHVHW
IRUFRQWDFWLQSXWFDOOFRPPXQLFDWLRQVWDWH
Select 2XWSXW6SHFL¿FDWLRQVIURPWKHPHQXRQWKH
OHIW8VHWKHGURSGRZQXQGHU³8VDJH´DQGVHOHFW
Contact Input Call / Communication State IRU
WKHDSSURSULDWHVWDWLRQ¿JXUH3UHVVWKH8SGDWH
EXWWRQWRVDYHFKDQJHV
,QRUGHUIRUWKHPXVKURRPEXWWRQSXVKWREHDEOH
WRFDOOWKHPDVWHUVDGRRUVWDWLRQJURXSZLOOQHHG
WREHFUHDWHG([SDQGFunction SettingsIURPWKH
PHQXRQWKHOHIWDQGVHOHFWContact Input Call
Click on the Open Door Station Group List button
DWWKHWRSRIWKHSDJH¿JXUH
2QFHLQWKHGRRUVWDWLRQJURXSOLVWVFUROOULJKW
to the appropriate door station and use the drop
GRZQWRVHOHFW³8´IRU8QLFDVWRU³0´IRU0XOWLFDVW
IRUHDFKPDVWHUVWDWLRQWKLVGRRUQHHGVWRFDOO,W
LVUHFRPPHQGHGWKDW*URXS'EHVHW¿JXUH
3UHVVWKH8SGDWHEXWWRQWRVDYHFKDQJHV
Select Contact Input CallDJDLQIURPWKHPHQXRQ
WKHOHIW8VLQJWKHGURSGRZQXQGHU*URXS1XPEHU
select the group that was created in the previous
VWHS8VLQJWKHGURSGRZQXQGHU3ULRULW\VHOHFWWKH
SULRULW\OHYHODWZKLFKWKHPXVKURRPEXWWRQLVWR
SODFHDFDOO¿JXUH3UHVVWKH8SGDWHEXWWRQWR
VDYHFKDQJHV
2QFHDOOVWHSVKDYHEHHQFRPSOHWHGWKHGRRUVWDWLRQZLOOQHHGWREHXSGDWHGZLWKWKHQHZVHWWLQJV)URPWKH)LOH0HQXVHOHFW
Upload Settings To Station. &KHFNWKHER[EHVLGHWKHVWDWLRQWKDWKDVEHHQXSGDWHGDQGFOLFN6WDUW8SORDG7KHVWDWXVPHQXZLOO
GLVSOD\WKHUHVXOWRIWKHXSORDG