ESD CONTROL
The Global Partner for Complete Packaging Solutions
Contents
3. GROUNDING PRODUCTS
1. ESD BASICS
What is ESD?
ESD Basics
ESD Control Program
Example of an EPA
Definitions
ESD Training and Instruction
4
5
6
7
8
9
2. PRODUCTS FOR THE EPA
Dissipative Work Surface Mats Mat & Table Top Cleaner Dissipative Floor Mats Floor Finish System Field Service Kit Tapes
EPA Warning Signs ESD Safe Chairs ESD Safe Furniture ESD Clothing ESD Gloves
Dissipative Binders Dissipative Ordercover Dissipative Clipboard Dissipative Document Holders
Conductive Waste Bins Low Charging Waste Bags Staticide Heavy Duty
12
13
13
14
14
15
16
18
18
19
19
20
20
20
20
21
21
21
Wrist Bands Grounding Cords Common Point Grounds Adapt-A-Snaps EBP Europlug EBP Bar Shoe Grounders Disposable Heel Straps
Conductive Disposable Shoe Covers ESD Shoes Groundcheck Grounding Tester Groundcheck Backplate Groundcheck Footplate Groundcheck Calibration Monitor Constant Wrist Strap Monitor 24
25
25
26
26
26
27
28
28
28
29
29
30
31
31
43
43
47
48
48
49
49
50
51
5. IONIZATION EQUIPMENT
Aerostat PC Aerostat XC Aerostat Guardian Top Gun 54
54
55
55
6. TEST AND MEASURING EQUIPMENT
4. ESD PROTECTIVE PACKAGING
Static Shielding Bags Dry Shielding Bags Desiccant Bags Humidity Indicator Cards VCI for ESD applications Dissipative Pink PE
Permanent Dissipative PE ESD Bubble Wrap Dissipative PE Foam Conductive PE Foam Dissipative PU Foam Component Boxes PCB Boxes Cortronic Shielding Corrugated Carton Plastic Conductive Containers Conductive Corrugated PP
Vacuum Thermoformed Trays Conductive Pallets ESD Airpad Membrane Boxes Cleanroom Packaging 34
35
36
36
37
38
39
40
40
41
41
42
Static Locator Static Field Meter Surface Resistance Meter Surface Resistance Kit Concentric Ring Probe Ionizer Performance Analyzer 58
58
59
59
60
60
3
E S D basics
1
ESD BASIC
What is ESD?
ESD – ElectroStatic Discharge is a spark, a micro-lightning bolt which passes from
one charged conductive surface to another conductive surface. This incredible
rapid transfer of what had heretofore been a static (unmoving) charge can cause
fires, explosions, EMI, RF, heat, light and even sound waves. It is this unseen, unfelt,
unheard micro lightning spark that must be controlled.
4
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D basics
1
ESD BASICs
ESD Basics
ESD Control Program
Example of an EPA
Definitions
ESD Training and Instruction
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
6
7
8
9
5
E S D basics
ESD Control Program
1
ESD BASIC
An ESD Control Program includes the following
points. By strictly complying with those points
ESD damage can be minimized.
ESD evaluation
– Assign an ESD coordinator.
– ESD training and instruction.
– Handle ESD sensitive (ESDS) products only in an ESD
Protected Area (EPA).
– Keep all conductors (including persons) on the same
potential.
– Remove all ”common” (charge generating) plastics
from the EPA.
– Neutralize electrostatic charges on essential insulative
materials by using ionization.
– Surround all ESDS with ESD safe packaging
materials, except when they are being actively worked
on.
– Which components are ESDS (ElectroStatic Discharge
Sensitive)?
– Where are ESDS products handled?
– Which processes can cause ESD?
– Where do ESDS products go to after leaving the plant?
– Quantify damage and loss due to ESD.
ESD protection
Optimal ESD protection can be achieved by a
combination of:
– ESD training and instruction;
– ESD protective products;
Monitoring an ESD Control Program
– Frequent monitoring of the above.
Once an ESD Control Program has been implemented,
ESD training and instruction
it is necessary to routinely monitor the program to make
sure every element is working properly.
A comprehensive ESD Control Program should include
– Explain why ESD protection is necessary.
– Demonstrate the use of various ESD products.
the following equipment:
– Adjust precautions to the practical working
circumstances.
Static Locator or Static Field Meter:
– Explain that ESD protection can generate a generous
To demonstrate electrostatic charges or to determine
return on investment.
whether electrostatic charges are present.
EPA (ESD Protected Area)
Wrist band, footwear/shoe grounder tester:
– ESD safe worksurface.
For testing wrist bands, grounding cords, footwear or
– Wrist band with grounding cord.
shoe grounders.
– Identification EPA (caution sign).
Surface Reistance Meter:
Additional/optional:
For testing worksurfaces, floor mats and flooring.
– ESD safe floor, in combination with shoe grounders or
ESD safe footwear.
Charged Plate Monitor:
– ESD safe chairs.
For testing ionization equipment.
The required frequency for checking the different ESD
provisions is dependent of factors such as usage, items
durability as well as the impact on the ESD Control
Program and consequently on ESDS.
Product
Equipment
– ESD safe binders and document holders.
– ESD safe garments (gloves, coats, headwear).
– ESD safe tooling.
– ESD safe waste bins.
– Worksurface ionizers.
Testing
EPA
Visual
Daily
Packaging
Visual
Daily
Wrist Bands
Groundcheck Grounding Tester Daily
Shoe Grounders Groundcheck Grounding Tester Daily
Shoes
Groundcheck Grounding Tester Daily
Worksurfaces
Surface Resistivity Meter
Quarterly
Field Service Kit Surface Resistivity Meter
Quarterly
Flooring
Surface Resistivity Meter
Quarterly
Chairs
Chaircheck
Quarterly
Ionizers
Ionizer Performance Analyzer
Quarterly
Clothing
Surface Resistivity Meter
Semi-annually
Equipment
Calibration
Calibration Monitors
Annually
ESD Training
ESD Coordinator/ESD Consultant Annually/
Bi-annually
6
Checklist for ESD Safe Handling
ESD protective packaging
– Checking of packaging of incoming goods.
– Packaging requirements of the product:
- product sensitivity
- electrical properties
- mechanical properties
- water vapour transmission rate (WVTR)
- single use or re-usability
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D basics
1
ESD BASICs
Example of an EPA
1. Groundable wheels
2. Groundable surface
3. Wrist band and footwear tester
4. Footwear testing plate
5. Wrist band and grounding cord
6. Grounding cord
7. Ground Connecting Point
8. Earth Bonding Point (EBP)
9. Groundable point of trolley
10. Toe and heel strap (footwear)
11. Ionizer
12. Dissipative surfaces
13. Chair with groundable feet and pads
14. ESD Floor
15. ESD Clothing
16. Shelving with grounded surfaces
17. Groundable racking
18. EPA sign
19. Machine
16
18
3
17
15
11
12
6
5
15
19
7
13
8
2
9
4
10
1
1
14
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
7
E S D basics
Definitions
1
ESD BASIC
IEC 61340-5-1 is listing the following packaging
characteristics:
Electrostatic discharge shielding: a barrier or
enclosure that limits the passage of current and
attenuates the energy resulting from an electrostatic
discharge such that the maximum energy from 1.000 V
human body model discharge is 50 nJ.
Electrostatic conductive: packaging with a surface
resistance of ≥ 1 x 102 ohms and < 1 x 105 ohms.
Electrostatic dissipative: packaging with a surface
resistance of ≥ 1 x 105 ohms and < 1 x 1011 ohms.
Insulative: packaging with a surface resistance of ≥ 1 x
1011 ohms.
ESD Standards and Military Specifications
IEC 61340-5-1: Protection of Electronic Devices from
Electrostatic Phenomena - User Guide.
IEC 61340-5-2: Specification for the Protection of
Electronic Devices from Electrostatic Phenomena.
ANSI/ESD S541-2003: Packaging materials for ESD
sensitive items.
JESD-625-A: Requirements for Handling ESDS Devices.
ANSI/EIA-583: Packaging Material Standards for
Moisture Sensitive Items.
ANSI/ESD-S20.20-2007: Program for the Development
Low charging: packaging exhibiting properties
which minimize any charge. (The terms astatic and
of an ESD Program.
ESD ADV1.0-2004: Glossary of terms.
antistatic should be avoided due to the different existing
meanings). Is not specified in IEC 61340-5-1.
ANSI/ESD-S8.1-2007: ESD Awareness Symbols.
ANSI/ESD STM4.2-2006: ESD Protective Worksurfaces.
ESD Symbols
The ESD susceptibility symbol
ESD ADV53.1-1995: ESD Protective Workstations.
incorporates a reaching hand in a
triangle with a slash through it to
ANSI/ESD-S6.1-2005: Grounding.
indicate that the item so marked is
susceptible to ESD damage and
ANSI/ESD-S1.1-2006: Wrist Straps.
should not be touched without ESD safe handling
ANSI/ESD-S9.1-2006: Footwear - Resistive
controls.
Characterization.
The ESD protective symbol differs from the ESD
susceptibility symbol, by the addition of an arc around
ANSI/ESD-S7.1-2005: Floor Materials - Resistive
the outside of the triangle and the omission of the slash
Characterization.
across the hand and the triangle. It should be used
to identify items that are specifically
designed to provide ESD protection,
such as for instance packaging.
Instead of the asterisk a letter
indicates the primary function of the
packaging material:
S = Electrostatic Discharge Shielding
D = Electrostatic Dissipative
L = Low Charging
C = Electrostatic Conductive
8
ANSI/ESD STM97.1-2006: Floor Materials and
Footwear.
ANSI/ESD STM12.1-2006: Seating - Resistive
Measurement.
ANSI/ESD-STM2.1-2006: Garments.
ESD S11.31-2006: Shielding Materials - Bags.
ANSI/ESD STM3.1-2006: Ionization.
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D basics
1
ESD BASICs
ESD TR3.0-02-05: Selection and Acceptance of Air
Useful addresses
Ionizers.
ESD standards are available from:
ESD Association, 7900 Turin Road, Building 3, Suite 2,
ANSI/ESD STM5.1-2007: Sensitivity Testing Human
Rome, NY 13440-2069, U.S.A., Phone
Body Model.
+1 (315) 339-6937, Fax +1 (315) 339-6793,
ANSI/ESD STM5.2-1999: Sensitivity Testing Machine
Model.
E-mail eosesd@aol.com, Website http://www.esda.org
NEN (Nederlands Normalisatie Instituut/NNI)
ANSI/ESD S11.11-2006: Triboelectric Charge
Accumulation Testing.
Postbus 5059
2600 GB Delft
info@nen.nl
EOS/ESD-S11.11-1993: Surface Resistance
ESD Training and Instruction
Measurement.
ESD training and instruction are essential for a
MIL-HDBK-263: Electrostatic Discharge Control
successful implementation of an ESD Control Program.
Handbook.
People need to be convinced of the necessity of ESD
protection. Subsequently they need to know and
MIL-PRF-81705: Barrier Materials, Flexible,
understand the proper use of ESD protective products.
Electrostatic Free, Heat Sealable. MIL-PRF-87893:
Workstations, Electrostatic Discharge (ESD) Control.
In-house ESD Training
MIL-STD-1686: Electrostatic Discharge Control
In-house training, geared towards the specific
Program.
requirements of the customer.
IEC61340-4-1: Electrical resistance of floor coverings
and installed floors.
IEC61340-4-2: Test methods for garments.
ESD Training
Item No. Description
1602430
1600909
In-house Training
CD-rom Training
IEC61340-4-3: Footwear.
IEC61340-4-5: Methods for characterizing the
electrostatic protection of footwear and
flooring in combination with a person.
IEC61340-2-1: Measurements methodsability of materials and products to
dissipate Static Electric Charge.
IEC61340-2-3: Methods of test for
determining the resistance and resistivity
of solid planar materials used to avoid
electrostatic charge accumulation.
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
9
P R O D U C T S F O R T H E E PA
2
PRODUCTS
FOR THE
EPA
Products for the EPA
An ESD safe workstation protects ESDS products by safely draining damaging static
charges to ground. A wrist band connected with grounding cord prevents the operator
from charging. Parts placed on a dissipative mat safely decay their static charge to
ground. Both wrist band and worksurface mat should be grounded by a Common Point
Ground.
10
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
P R O D U C T S F O R T H E E PA
Products
for the EPA
Locations where an EPA is absolutely
necessary are:
2
– incoming goods
PRODUCTS
FOR THE
EPA
– incoming goods inspection
– warehouse
– board assembly and testing
– shipping department
– field service
Dissipative Work Surface Mats Mat & Table Top Cleaner Dissipative Floor Mats Floor Finish System Field Service Kit Tapes
EPA Warning Signs ESD Safe Chairs ESD Safe Furniture ESD Clothing ESD Gloves
Dissipative Binders Dissipative Ordercover Dissipative Clipboard Dissipative Document Holders Conductive Waste Bins Low Charging Waste Bags Staticide Heavy Duty
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
12
13
13
14
14
15
16
18
18
19
19
20
20
20
20
21
21
21
11
P R O D U C T S F O R T H E E PA
Dissipative Work Surface Mats
Vinyl Mat 3,2 mm and Rubber Mat 1,5 mm
work surface mats are available in two stock
sizes, on rolls or to customer requirements.
The stock sizes have two 7 mm connecting
points on a short side and can be supplied
as a work surface set with a Common
Point Ground and a wrist band set (stretch
adjustable wrist band with 360 cm grounding
cord). Optional is an EBP Europlug.
2
PRODUCTS
FOR THE
EPA
Vinyl Mat 3,2 mm
Vinyl Mat 3,2 mm is made of strong, durable vinyl and
is constructed of three layers: top layer, thin conductive
layer (buried layer) and a “foamy” bottom layer.
Vinyl Mat 6,4 mm
– thickness 6,4 mm
– blue homogeneous vinyl
– will always lie flat, will not curl, will not slip, will not tear
– highly resistant to abrasion
– RS: 109 ohms (ESD S20.20)
– static decay < 0,5 sec. (FTMS 101, MTH 4046.1,
5.000 V-0 V)
Vinyl Mat 6,4 mm Work Surface Mat
Item No.
Colour
Roll
1600954
Blue
1320 mm x 12,1 m
– thickness 3,2 mm
– available in blue and grey
Rubber Mat 1,5 mm
– lightweight
The two layer Rubber Mat 1,5 mm work surface mat is
– excellent flatness
constructed of a dissipative top layer with a conductive
– RS: 10 ohms (ESD S20.20)
backing. The top layer is resistant to solvents, hot
7
solder and soldering irons.
– RG: 107 ohms (ESD S20.20)
– complies with IEC 61340-5-1
– thickness 1,5 mm
– available in blue, grey and beige
– excellent flatness
– RS: 107 ohms (EOS/ESD-S4.1)
– RG: 106 ohms (EOS/ESD-S4.1)
– static decay < 0,01 sec. (FTMS 101, MTH 4046.1,
5.000 V-0 V)
– complies with IEC 61340-5-1
Vinyl Mat 3,2 mm Work Surface Mat
Item No.
Colour
Roll
1600934
1600935
blue
grey
1220 mm x 30,4 m
1220 mm x 30,4 m
Different sizes available upon request
Rubber Mat 1,5 mm Work Surface Mat
Item No.
Colour
Roll
1600943
1600944
1600946
1600952
1600936
1600942
blue
blue
grey
grey
beige
beige
610 mm x 15,2 m
910 mm x 15,2 m
610 mm x 15,2 m
910 mm x 15,2 m
610 mm x 15,2 m
910 mm x 15,2 m
Different sizes available upon request
12
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
P R O D U C T S F O R T H E E PA
Mat & Table Top Cleaner
It is an absolute
– effectively removes flux residues, oil, finger marks,
grease, nicotine, dirt or grime and inorganic
contaminants
necessity to
clean dissipative
work-surfaces on
– leaves no film and is non-streaking
a regular basis.
– non-flammable
This will prevent
– safe on any worksurface
2
a too high RS
caused by
Mat & Table Top Cleaner
contamination.
PRODUCTS
FOR THE
EPA
Item No.Description
1601176
1601177
12 spray botttles of 0,95 l
4 bottles of 3,8 l
Dissipative Floor Mats
When walking, people “tribocharge”, building
up static charges on their bodies. The body’s
static charge can safely be drained to ground by
wearing conductive shoes or a shoe grounder on
Grounding cord for floor mat
–450 cm straight cord for
grounding floor mats
–1 Mohm resistor
each shoe when walking on a conductive floor
or floor mat.
Grounding Cords for Floor Mat
Dissipative Floor Mat 2,5 mm
Dissipative Floor Mat 2,5 mm
Item No.
Colour
Termination
1600930
black
screw->B/A
B/A = banana plug/alligator clip
is a synthetic rubber
with a conductive
backing. Available
as stock size floor
Snap Tool
mat, on rolls,
This rugged, metal snap tool can
and as runners
be used to put 7 and 10 mm
to customer
connecting points in worksurface
requirements.
mats or floor mats.
– thickness 2,5 mm
Snap Tool
– stock size mat is supplied
with 450 cm straight grounding cord
Item No.
Connecting points
1601186
7/10 mm
– RG: 106 ohms (ESD-STM 7.1-2005)
– complies with IEC 61340-5-1
Dissipative floor mat 2,5 mm
Item No.
Roll
1600912
1220 mm x 10 m
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
13
P R O D U C T S F O R T H E E PA
Floor Finish System
Floor Finish System is a two step system for
the ESD maintenance of floors, consisting of
Dissipative Floor Stripper and Floor Finish.
– Meets or exceeds MIL-B817058, NFPA 56A
2
Staticide Floor Finish System
PRODUCTS
FOR THE
EPA
Item No.
Packaging
1601182 Stripper
1601180 Finish
4 bottles of 3,8 l
4 bottles of 3,8 l
Field Service Kit
For maintenance or repair of electronic equipment in
the field, a field engineer should always use a Field
Service Kit to prevent ESD damage.
– Field Service Mat, with two large pockets, 20 x 30 cm
– 7 mm connecting point
– wrist band set (stretch adjustable wrist band with 360 cm
coil cord)
– Common Point Ground with bulligator clip
– RS: 107 ohms (ASTM D257)
– resistance conductive layer 103 ohms (ASTM D257)
– complies with IEC 61340-5-1
– optional: pouch
Field Service Kit
14
Item No.
Colour
Size in mm
1601171
1601172
dark blue
red
600 x 600
600 x 600
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
P R O D U C T S F O R T H E E PA
Tapes
Double Sided Tape
Floor Marking Tape
Double sided
Self adhesive tape to define the boundaries of an EPA.
tape to adhere
– PVC, laminated with clear PP for durability and
washability
worksurface mats
and floor runners
– life expectancy 3-12 months
to respectively the
2
– printed ”ESD Protected Area” with ESD caution logo
workbench and the
floor.
PRODUCTS
FOR THE
EPA
Double Sided Tape
Item No.
Roll
1601437
50 mm x 25 m
Copper Grounding Tape
Copper grounding tape is used to ground floor mats.
Floor Marking Tape
Item No.
Roll
1603174
50 mm x 66 m
Copper Grounding Tape
Item No.
Roll
1600651
12 mm x 33 m
ESD Tapes
ESD Tapes are used as a replacement for
standard adhesive tape in EPA’s.
ESD Tapes
Item No.
Description Dimensions
1603973
1603974
Clear Antistatic Tape 25 mm x 66 m
Antistatic Packaging Tape 50 mm x 66 m
– does not generate electrostatic charge
– suitable for use in an EPA
– printed yellow with black logo and text to EN 61340-5
1603973
1603974
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
15
P R O D U C T S F O R T H E E PA
EPA Warning Signs
Floor stickers are used to define and indicate the
limits of an EPA.
Floor Stickers
2
Item No.
Size in mm
Language
1603891
120 x 60
English
PRODUCTS
FOR THE
EPA
IEC 61340-5-1 requires that grounding points are
clearly designated. This can be done with EBP
(Earth bonding Point) and EGP (Earth grounding
Point) labels.
– made of strong, self-adhesive vinyl
– yellow, with black print
– 12 mm hole for fitting the label over a press stud
connector
EBP labels
16
Item No.
Description
1600905
1600906
Earth Bonding Point
Earth Grounding Point
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
P R O D U C T S F O R T H E E PA
EPA Warning Signs
According to IEC 61340-5-1 the EPA has to be
identified as such.
– made of yellow ”foamex”
– treated with a low charging coating
– printed in black to IEC 61340-5-1
2
– radiused corners with holes for fixing
EPA warning sign
Item No.
Size in mm Language
1601732
1600893
300 x 150 English
300 x 150 Dutch
PRODUCTS
FOR THE
EPA
It is crucial to really identify when you are leaving
an EPA.
– help raise awareness of the EPA
– conforms to EN 61340-5-2 §4.3
– an aid to both visitors and employees
EPA Exit warning sign
Item No.
Size in mm Language
1603173
300 x 150 English
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
17
P R O D U C T S F O R T H E E PA
ESD Safe Chairs
2
Normal chairs can generate static charges. An
Optional:
ESD safe chair has a conductive path from the
– ESD safe armrests
seat and backrest to the conductive castors.
– ESD safe footring
Placed on a conductive floor or floor mat the chair
– Cleanroom version
is thus grounded.
– ESD “Stop & Go Wheels”
– 100% ESD safe (seat, backrest and covers)
– colours: black, blue, grey, red
ESD Safe Chair
PRODUCTS
FOR THE
EPA
Item No.
Description
1603156
1603159
1603162
1603164
ESD Basic Model 2
ESD Sintec Model 2
ESD Unitec
ESD Stahulp
Other options available upon request
ESD Safe Furniture
Our ESD Safe Furniture and its accessories are suitable for
usage within an EPA.
– dissipative hard laminate work surface
– RG: 106 ohms
– connecting points for wrist band left and right below the work surface
– working height adjustable
– also available with shelves, adjustable in height and angle
ESD Safe Furniture
Item No.
Work surface size in mm
1603167
1603168
1603385
1603386
1000 x 800
1200 x 800
1400 x 800
2000 x 800
Other options available upon request
18
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
P R O D U C T S F O R T H E E PA
ESD Clothing
While working on an EPA, ESD Clothing is
Naptex:
necessary to make sure that people do not charge
- basis fabric polyester-cotton
the products that they are working with. We have
- conductive yarns based on steel fibers encapsulated
with cotton
a wide product range to fulfill your needs.
ESD Clothing
Item No. Description
1604173
1604201
1604442
1604330
1604331
Colour
Men Lab Coat – Naptex
white
Men Lab Coat – Conductex
white
ESD Polo Shirt – short sleeves, cotton royal blue/grey
ESD Polo Shirt – long sleeves, cotton royal blue/grey
ESD T-Shirt – short sleeves
silver-grey
Naptex is also available in petrol, light blue, royal blue and grey.
Conductex is also available in royal blue and light blue.
- Naptex clothing is approved and owning to its good
dissipation values used by most of the customers still
after many washing cycles
2
- typical surface resistance Rs: 104 - 105 ohms
PRODUCTS
FOR THE
EPA
Conductex:
- basis fabric polyester-cotton
- proprietary carbon-based conductive yarns
- typical surface resistance Rs: 105 - 106 ohms
- colours: white, royal blue, pastel blue
ESD Polo Shirt, short sleeves is also available in white, dark green/
grey, navy/grey, silver-grey/navy, silver-grey/red and silver-grey.
ESD Polo Shirt, long sleeves is also available in white and silvergrey/navy.
ESD T-Shirt is also available in royal blue.
Available sizes: S, M, L, XL, XXL and other sizes available upon
request.
ESD Gloves
ESD Gloves are suitable for electronic assembly
as they minimize the static generation. Elastic and
comfortable, enable a very precise handling.
ESD Gloves
Item No.
Description
Colour
1601772
1601770
1601773
1602036
1603945
Model Hamburg
Model Hamburg
Model Hamburg
Model Hamburg
Model Hamburg
S
M
L
XL
XXL
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
19
P R O D U C T S F O R T H E E PA
Dissipative Binders, Ordercover,
Clipboard and Document Holders
One of the first requirements in ESD Control is
Dissipative Clipboard
to get rid of “normal” plastics. With this in mind
– holds size DIN A4
the dissipative binders, ordercover and clipboard
– sprung metal clip holds paper
were designed.
– printed with ESD caution text
– made of dissipative light blue vinyl
2
PRODUCTS
FOR THE
EPA
– RS: 1011 ohms
Dissipative Clipboard
Item No.
Description
Dissipative Binders
1600899
Dissipative Clipboard
– hold size DIN A4
– 4-rings mechanism
Dissipative Document Holders
– printed with ESD logo
– dissipative pink PE
Dissipative Binders
Item No.
Description
1600898
1600897
Binder A4
Binder A3
Dissipative pink PE Document Holders
Item No.
Size
1601556
1601558
A4, 1 short side open
A4, 1 short and 1 long side open
Dissipative Ordercover
– holds size DIN A4
– windowed front plate
– back plate with diagonal pocket for paperwork
– 2 quick-binders
– printed with ESD logo
Dissipative Ordercover
Item No.Description
1601479Dissipative Ordercover
20
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
P R O D U C T S F O R T H E E PA
Conductive Waste Bins
Inside an EPA there is the need to have waste
Conductive Waste Bins
bins for the trash. The Conductive waste bins
Item No.
Content in liter
Size in mm
1600890
1600888
30
110
250 x 250 x 400
400 x 400 x 780
are suitable and in conformance with the IEC
61340-5-1.
– made of conductive fiber board 2 mm thick
2
– RS < 103 ohms
– reinforced with metal hoop at the top
PRODUCTS
FOR THE
EPA
Low Charging Waste Bags
The low charging waste bags are applicable and
for use inside of the Conductive waste bins.
– made of low charging polyethylene
– comparable in strength to conventional refuse sacks
– printed in black with ESD protective symbol and text
Low Charging Waste Bags
Item No.
Content in liter
Size in mm
1601477
1601478
30
110
± 280 x 700
± 460 x 990
Staticide Heavy Duty
Staticide is an inexpensive, easy-to-use topical
Staticide Heavy Duty
antistatic solution, is a highly-effective method
Item No.
Packaging
for long-term static control. It is widely used in a
1601183
1601184
12 spray bottles of 0,95 l
4 bottles of 3,8 l
broad range of industries, as well as in the office.
– meets MIL-B-81705 and NFPA-56A electrostatic
decay criteria
– can be applied as spray, wipe, dip or by transfer roller
coating, gravure coating or flexographic printing
– non-toxic and non flammable
– easily applied on walls, ceilings, floors, carpets,
fixtures, worksurfaces, tools and equipment,
conveyor belts, clothing and other materials
– proven effective in relative humidities below 15%
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
21
GROUNDING PRODUCTS
3
GROUNDING
PRODUCTS
Grounding Products
The first line of defense against the hidden dangers of ESD is good grounding by means
of wrist bands, grounding cords and shoe grounders. Daily testing of wrist bands,
grounding cords and shoe grounders is necessary and required by IEC 61340-5-1.
22
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
GROUNDING PRODUCTS
Grounding
Products
Wrist Bands Grounding Cords Common Point Grounds Adapt-A-Snaps EBP Europlug EBP Bar Shoe Grounders Disposable Heel Straps
Conductive Disposable Shoe Covers ESD Shoes Groundcheck Grounding Tester Groundcheck Backplate Groundcheck Footplate Groundcheck Calibration Monitor Constant Wrist Strap Monitor N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
24
25
25
26
26
26
27
28
28
28
29
29
30
31
31
3
GROUNDING
PRODUCTS
23
GROUNDING PRODUCTS
Wrist Bands
Stretch Wrist Bands
Ergo Wrist Bands
Our unique band material is manufactured using
All our metal bands are made of jewelry-grade
a patented crochet process. This Crochet Band is
expandable stainless steel. The bands are insulated
popular because it is comfortably soft and light, yet
with a triple-layer oven-baked coating, similar to that
durable and reliable. The band has total insulation on
used in the automobile industry. All models of metal
the outside for maximum protection. The inside of the
bands come with our patented “X-tenders” which
band is lined with a special yarn that is coated in silver
smartly-designed inter-connectable plastic links are
to provide superior conductivity and is constructed to
enabling the user to adjust or expand the strap to
“float” on the underside of the band to offer maximum
any wrist size by using one or more of the 5 pieces
contact with the skin. All adjustable bands are made
provided. This renders the metal band extremely
to fit any size wrist. Buckles are made with static
comfortable and eliminates the need to stock up on
dissipative nylon material.
different sizes.
– 3 mm stud with 360° swivel
– 3 mm stud with 360° swivel
– anti-allergic backplate
– Easily adjustable from 130-170 mm using one or
more of the five 10 mm nylon expansion links
– Meet or exceed IEC 61340-5-1, MIL HDBK 263B,
MIL STD 1686B and ANSI/ESD-S1.1-2006
3
Stretch Wrist Bands
GROUNDING
PRODUCTS
24
– Meet or exceed IEC 61340-5-1, MIL HDBK 263B,
MIL STD 1686B and ANSI/ESD-S1.1-2006
Ergo Wrist Bands
Item No.
Colour
Circumference
Version
Item No.
Colour
Circumference
Version
1601043
1601042
grey
dark blue
145 mm
adjustable
stretch
stretch
1600908
1600907
yellow
dark blue
adjustable
adjustable
metal
metal
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
GROUNDING PRODUCTS
Grounding Cords
Our grounding cords can meet and surpass any
– 100% retraction
rigid specification and possess an exceptionally
– 1 mohm resistor
long service life. All cords are insulated with
– 3 mm snap
Polyurethane.
– Banana plug/alligator clip termination or 7 mm snap
termination
– meet or exceed IEC 61340-5-1, MIL HDBK 263B,
MIL STD 1686B and ANSI/ESD-S1.1-2006
Grounding Cords
Item No.
Colour
Length
Termination
1600929
1600926
1600931
dark blue
dark blue
black
360 cm
180 cm
180 cm
3 mm→B/A
3 mm→B/A
3 mm→B/A
Grounding Cords
Item No.
Colour
Length
1600928
1600924
dark blue
dark blue
360 cm
180 cm
Termination
3 mm→7 mm
3 mm→7 mm
B/A = banana plug/alligator clip
3
GROUNDING
PRODUCTS
Common Point Grounds
Common Point Grounds take care of the proper
grounding of the operator and worksurface mat.
by using an Adapt A Snap additional personnel
can quickly plug into the ESD safe workstation
and can be properly grounded.
– 450 cm straight grounding cord
– quick release snap with full 360° swivel
– dark blue
– 1 Mohm resistor
– meet or exceed IEC 61340-5-1, MIL HDBK 263B,
MIL STD 1686B and ANSI/ESD-S1.1-2006
Common Point Grounds
Item No.
Mat connection
Termination
1600886
1600885
7 mm female/ 7 mm male
7 mm female/10 mm male
B/A
B/A
B/A = banana plug/alligator clip
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
25
GROUNDING PRODUCTS
Adapt-A-Snaps
The Adapt-A-Snap attached to a Common Point
Ground unit or to an existing grounding point
allows additional personnel to plug into the same
ground connection.
Adapt-A-Snaps
Item No.
Mat connection
1600855
1600862
10 mm male / 10 mm female
7 mm male / 7 mm female
EBP Europlug
The EBP Europlug is identical to a standard plug,
however with plastic (life) and (neutral) pins used
only for locating the plug.
3
– yellow ABS with black print
– provides a simple and effective grounding using the
ring mains earth as ground
GROUNDING
PRODUCTS
– front side of the plug has two 4 mm plug sockets and
one 7 mm male stud
– 1 Mohm resistor
– complies with IEC 61340-5-1
EBP Europlug
Item No.
Description
1600904
EBP Europlug
EBP Bar
Earth bounding point bars are designed to be
mounted on under-side of bench top or shelf.
– yellow ABS with black print
– two 4 mm plug sockets and one 7 mm male stud
– each grounding point is connected with 1 Mohm
resistor
– straight grounding cord of 2 m with a 5 mm ring
terminal
– complies with IEC 61340-5-1
EBP Bar
26
Item No.
Description
1600903
EBP Bar
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
GROUNDING PRODUCTS
Shoe Grounders
We offer both heel grounder and toe grounder.
Our designs are adjustable to fit all types of
Reversible Heel Grounder
– quick release buckle
footwear. The ground strap reliably provides
– reversible heel cup
positive contact with the skin inside the sock or
– longer lifetime
the shoe. On the outside surface, our heel and
– meet or exceed IEC 61340-5-1, MIL HDBK 263B,
MIL STD 1686B and ANSI/ESD-S1.1-2006
toe grounders use specially reinforced black
conductive rubber for superior static control
and on the inside; we use white, non-scuffing
insulating rubber to prevent the transfer of black
smudges or dirty marks on the user.
Reversible Heel Grounder
Item No.
Description
1600933
Reversible Heel Grounder
Heel Grounder
– quick release buckle
– unique elasticized rear section provides fit and
comfort to all shoe types and sizes
– bright red heel band for clear identification
– meet or exceed IEC 61340-5-1, MIL HDBK 263B,
MIL STD 1686B and ANSI/ESD-S1.1-2006
3
Heel Grounder
Item No.
Description
1600932
Adjustable Heel Grounder
GROUNDING
PRODUCTS
Toe Grounder
– for pumps or high heels
– unique elasticized rear section provides fit and
comfort
– bright red heel band for clear identification
– meet or exceed IEC 61340-5-1, MIL HDBK 263B,
MIL STD 1686B and ANSI/ESD-S1.1-2006
Toe Grounder
Item No.
Description
1601044
Toe Grounder
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
27
GROUNDING PRODUCTS
Disposable Heel Straps
Bright yellow disposable heel straps can easily be
seen when being worn. Good for short term use
and ideal for visitors.
Disposable Heel Straps
Item No.
Description
1600895
1604466
Disposable heel straps
Conductive plastic wall dispenser
Conductive Disposable Shoe Covers
Operators wearing conductive shoe covers will
be permanently grounded via the conductive floor
mat or floor. The grounding tab is worn in shoe or
sock and makes contact with the skin.
3
– for permanent grounding
– re-usable
– easy to wear
GROUNDING
PRODUCTS
Conductive Disposable Shoe Covers
Item No.
Description
1601197
Neutro Stat Boots
ESD Shoes
The main task of ESD shoes is to discharge static
electricity stored in a person through the floor in a
reliable and safe manner under all conditions.
– removable and washable insole
– heel shock absorption
1603860
– air pumping soft insole that provides additional shock
absorption
1603856
– energo additional shock absorber enhances heel
absorption
– the torsion support reduces stress on the forefoot
and makes the shoe robust
– oil-resistant outer sole
1603857
Disposable
Item No.
Description
1603856
1603857
1603858
1603859
1603860
Women Shoes
Men’s Office Shoes - Classic
Men’s Office Shoes
Men’s Shoes Citytrainer
Men’s Shoes Working
1603858
Other types available upon request.
28
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
1603859
GROUNDING PRODUCTS
Groundcheck Grounding Tester
The Groundcheck is a dependable easy to use
test mechanism for personnel grounding devices.
– pass indicated by a visible and audible signal, high fail
and low fail by a visible signal
– test range 750 Kohms - 35 Mohms
– 20 V test voltage
– accuracy +/- 10%
– supplied with calibration certificate
– uses a 9 V alkaline battery
– indicator for low battery
– 7 mm press stud, 4 mm plug socket, 6 mm stud for
alligator clip
– complies with IEC 61340-5-1
– CE compliant
Groundcheck Grounding Tester
Item No.
Size in cm
Description
1600922
6,8 x 11,5 x 2,5 Groundcheck Grounding Tester
3
GROUNDING
PRODUCTS
Groundcheck Backplate
In combination with a Backplate, the
Groundcheck can be used as a central grounding
tester at the entrance of the EPA.
– printed with clear test instructions
– 4 and 10 mm connecting point for grounding cords
– 10 mm press stud for connection to the Footplate
– size 30 x 20 cm
– 4 mounting screws are included
Groundcheck Backplate
Item No.
Language
1600877
1600873
Dutch
English
Other languages available upon request
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
29
GROUNDING PRODUCTS
Groundcheck Footplate
The metal Footplate can be used in combination
with the Groundcheck and the Backplate for
testing of shoe grounders and conductive
footwear.
– 10 mm press stud
– 200 cm straight wire with 1 Mohm resistor for
connection to the Backplate
Groundcheck Footplate
Item No.
Size in cm
Description
1600920
15 x 30
Groundcheck Footplate
3
GROUNDING
PRODUCTS
30
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
GROUNDING PRODUCTS
Groundcheck Calibration Monitor
The Groundcheck Calibration Monitor was
designed to monitor the Groundcheck Grounding
Tester to be working within the parameters of IEC
61340-5-1.
– 4 test positions: low fail, low pass, high pass, high fail
– CE compliant
Groundcheck Calibration Monitor
Item No.
Size in cm
Description
1600919
6,8 x 11,5 x 2,5 Groundcheck Calibration Monitor
3
GROUNDING
PRODUCTS
Constant Wrist Strap Monitor
The Constant Wrist Strap Monitor continuously
measures the operator’s wrist strap and ground
connection.
– pass indicated by a green LED flash, fail indicated by
an audible signal and a red LED flash
– 9 V DC adapter, 110 V AC 300 ma
– test voltage nominal 7,5 V
– accuracy +/- 5%
– weight 85 g
– CE compliant
Constant Wrist Strap Monitor
Item No.
Size in cm
Description
1600894
8 x 5,6 x 2,5 Constant Wrist Strap Monitor
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
31
E S D P R O T E C T I V E PA C K A G I N G
4
esd
protective
packaging
ESD Protective Packaging
ESD Protective Packaging is a major step in an ESD Control Program and should,
depending on the application, feature the following functions:
– prevention of charge generation
– shielding against ESD and electrostatic fields
– mechanical protection
– corrosion protection
32
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
ESD Protective
Packaging
Static Shielding Bags Dry Shielding Bags Desiccant Bags Humidity Indicator Cards VCI for ESD applications Dissipative Pink PE
Permanent Dissipative Film ESD Bubble Wrap Dissipative PE Foam Conductive PE Foam Dissipative PU Foam Component Boxes PCB Boxes Cortronic Shielding Corrugated Carton Plastic Conductive Containers Conductive Corrugated PP
Vacuum Thermoformed Trays Conductive Pallets ESD Airpad Membrane Boxes Cleanroom Packaging N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
34
35
36
36
37
38
39
40
40
41
41
42
43
43
47
48
48
49
49
50
51
4
esd
protective
packaging
33
E S D P R O T E C T I V E PA C K A G I N G
Static Shielding Bags
Static Shielding Bags have been designed for ESD
Static Shielding 7200 Bags
safe packaging of PCB´s and IC´s. They protect
Item No.
Size in mm
Size in inches
their contents against ESD and electrostatic
1601135
1601101
1601102
1601103
1601105
1601106
1601107
1601110
1601111
1601113
1601114
1601115
1601116
1601118
1601119
1601120
1601123
1601124
1601125
1601126
1601128
1601129
1601130
1601131
76 x 127
102 x 102
102 x 152
102 x 610
127 x 203
152 x 203
152 x 254
152 x 610
178 x 406
203 x 254
203 x 305
203 x 406
203 x 610
254 x 305
254 x 356
254 x 610
279 x 381
305 x 406
305 x 457
356 x 457
381 x 457
406 x 457
457 x 457
457 x 610
3” x 5”
4” x 4”
4” x 6”
4” x 24”
5” x 8”
6” x 8”
6” x 10”
6” x 24”
7” x 16”
8” x 10”
8” x 12”
8” x 16”
8” x 24”
10” x 12”
10” x 14”
10” x 24”
11” x 15”
12” x 16”
12” x 18”
14” x 18”
15” x 18”
16” x 18”
18” x 18”
18” x 24”
fields.
Static Shielding 7200 Bags
– ”buried layer, metal in” construction
– construction from outside to inside: dissipative
coating/metalized PET/dissipative LDPE, total gauge
0,08 mm +/- 10%
– amine free and polycarbonate compatible
– puncture resistance > 12 lbs (FTMS 101, MTH
2065.1)
– light transmission 40%
– printed with ESD logo and lot code for traceability
– RS of inner and outer layer < 1011 ohms (ESD- S11.11)
– resistance of aluminium layer 100 ohms (ASTM D257,
12% relative humidity)
– static shielding < 10 nJ (ESD-S11.31)
– static decay < 0,05 sec. (MIL-STD-3010)
– meet or exceed IEC 61340-5-1, MIL PRF 81705D,
Type III, Class 1
Other sizes available upon request
– RoHS compliant
Static Shielding 7210 Zip Top Bags
4
Static Shielding 7210 Zip Top Bags feature the same
properties as Static Shielding 7200 Bags. With a low
charging, amine free dual track Zip Top closure as an
esd
protective
packaging
alternative to folding bags and securing them with an
ESD caution label.
Static Shielding 7210 Zip Top Bags
Item No.
Size in mm
Size in inches
1601144
1601136
1601137
1601138
1601139
1601142
1601143
76 x 127
102 x 152
152 x 254
203 x 254
254 x 356
356 x 457
457 x 457
3” x 5”
4” x 4”
6” x 10”
8” x 10”
10” x 14”
14” x 18”
18” x 18”
Other sizes available upon request
34
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Dry Shielding Bags
The Surface Mount Technology has created
Dryshield 7000 Bags
devices which are increasingly sensitive for the
Item No.
Size in mm
Size in inches
damaging effects of moisture, corrosion and
1601151
1601153
1601149
254 x 508
254 x 762
406 x 457
10” x 20”
10” x 30”
16” x 18”
ESD. Dry Shielding Bags protect against those
damaging influences. They meet or exceed
the most critical requirements of water vapour
transmission and ESD shielding and also offer
EMI protection.
Other sizes available upon request
Dryshield 7700 Bags
Dryshield 7700 Bags feature the same properties as
The tough Dry Shielding Bags are heat sealable and are
Dryshield 7000 Bags, however with lower MVTR and
suitable for vacuum and/or nitrogen flushed packaging.
higher puncture resistance.
They are ideal for packaging of SMDs in trays, tubes or
on tape and reel. The requirements for dry packaging
are described in EIA 583.
Dryshield 7000 Bags
– strong, lightweight, suitable for vacuum packaging
and nitrogen flushing
– construction from outside to inside:
dissipative PET Alu/PET/Alu/dissipative LDPE/total
gauge 0,09 mm +/- 10%
– construction from outside to inside: extra thick
dissipative PET/Alu/PET/Alu/extra thick dissipative
LDPE, total gauge 0,18 mm +/- 10%
– MVTR < 0,005 g/100 S7.IN./ 24 HRS (ASTM F1249)
– puncture resistance > 30 lbs (MIL-STD-3010)
Dryshield 7700 Bags
Item No.
Size in mm
Size in inches
– amine free, polycarbonate compatible
1601154
1601156
254 x 762
406 x 457
10” x 30”
16” x 18”
– MVTR < 0,02 g/100 S9.IN./ 24 HRS (ASTM F1249)
Other sizes available upon request
– puncture resistance > 20 lbs (FTMS 101, MTH
2065.1)
– printed with ESD and moisture warning symbol and
lot code for traceability
– RS of inner and outer layer < 1011 ohms (ANSI/ESDS11.11)
4
– resistance of alu layer 100 ohms (ASTM D257, 12%
RH)
esd
protective
packaging
– static shielding < 10 nJ (ESD-S11.11)
– EMI attenuation 45 dB (MIL PRF 81705D)
– static decay < 0,03 sec. (MIL-STD-3010)
– meet or exceed IEC 61340-5-1, MIL PRF-81705D,
Type I, Class 1 and EIA 583
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
35
E S D P R O T E C T I V E PA C K A G I N G
Desiccant Bags
In order to reach an optimal low relative humidity
(RH) desiccant bags have to be included in the
Dryshield Bags. According to EIA 583 dry shielding
bags are incomplete without desiccant bags.
– adsorb the moisture left inside the bags after vacuum
sealing and capture the moisture that manages to
pass through the bag material
– prevent the relative humidity to rise above a critical
percentage
– are filled with activated clay and made of strong GDT
material
– meet or exceed DIN 55473B and MIL D 3464E, Type II
Desi Pak Desiccant Bags GDT
Item No.
Units
Quantity/box
1600702
1600704
1600708
1/2
1
2
540
350
210
Other options are available upon request
Humidity Indicator Cards
4
Humidity indicator Cards are colour change
esd
protective
packaging
indicators. They are reversible.
As the humidity increases the chemically impregnated
spots change from a blue colour through a lavender,
to a pink colour, indicating whether or not a critical RH
has been reached. Humidity Indicator Cards go hand in
hand with the desiccant bags inside the Dry Shielding
Bags.
Humidity Indicator Cards
36
Item No.
Colour change
at % RH
Size in mm
1600678
1600675
1600680
1600674
10, 20, 30, 40
10, 20, 30, 40, 60
5, 10, 15
5, 10, 60
75 x 40
110 x 40
76 x 52
76 x 52
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Volatile Corrosion Inhibitor for ESD applications
Volatile Corrosion Inhibitor emitter Tyvek sachets
Protects ferrous and non-ferrous metals from
corrosion. One sachet saturates 28 L of air with VCI.
Protective VCI film needs no removal and parts can
be immediately used. Should be packed together
with parts to be protected in a closed package (PEbag, corrugated, plastic or metal box etc). Sachet is
non-dusting, non-linting and electrically low-charging.
NATO Stock Number 6850-01-470-2737. Conform
to MIL-I-22110 C. Shelf life 2 years in unopened
packaging.
VCI emitter Tyvek sachets
Item no.
Description
1702301
64x64 mm Tyvek sachet, 300 sachets/box
Static dissipative Volatile Corrosion Inhibitor bags
and film (also Cleanroom, class 50 version)
Static dissipative VCI bags and film combines the
properties of pinkpoly bags and VCI corrosion
protection. Protection is given to steel, copper & its
4
alloys, aluminium & its alloys, brass, solder, silver,
nickel (for other substances, please inquire). VCI does
not affect plastics used in the electronics industry.
esd
protective
packaging
Protective VCI film needs no removal and parts can be
immediately used. Available as flat and gusset bags, flat
film and tube in 50-150 μm thickness and maximum
tube width of 1,3 m. Flat bags are optionally available
with zip closure. Also available in a Cleanroom version,
class 50. The static dissipative properties are achieved,
free of amines, phosphates, silicones or other harmful
substances. Shelf life 1 years in unopened packaging.
VCI Bags
Item no.
Description
1702594
VCI Bag 450x600 mm, 50 µm
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
37
E S D P R O T E C T I V E PA C K A G I N G
Dissipative Pink PE
Dissipative pink poly is an ESD safe packaging
Dissipative Pink PE Bags, 0,09 mm
material that can be supplied as bags, zip top
Item No.
Size in mm
1601689
1604072
1603056
1604073
1603057
1604074
1603975
1604075
1604076
1604077
1603976
1604078
1602686
1604079
76 x 127
102 x 152
127 x 203
152 x 203
152 x 254
203 x 254
203 x 305
203 x 406
254 x 305
305 x 356
305 x 406
305 x 457
406 x 508
457 x 610
bags, tubing and sheeting.
Dissipative Pink PE, 0,09 mm
– amine free and polycarbonate compatible
– RS of both surfaces < 1012 ohms (ANSI/ESD-S11.11)
– static decay < 2 sec. (FTMS 101, MTH 4046.1,
1.000 V-0 V)
– also available for Cleanroom applications
– complies with IEC 61340-5-1
Dissipative Pink PE Sheeting, 0,09 mm, rolls 152 m
Dissipative Pink PE Tubing, 0,09 mm, rolls 250 m
Item No.
Roll width in mm
Item No.
Roll width in mm
1604133
1372
1604126
1604127
1604128
1604129
1604130
1604131
1604132
100
150
200
250
300
400
500
4
esd
protective
packaging
38
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Permanent Dissipative PE
Permanent Dissipative PE is based on a novel
film width is 2500 mm and thickness range is from 40
inherently dissipative polymer (IDP) that is
μm to 140 μm. EVOH and nylon layers can be used
able to conduct ions. IPE is an abbreviation for
to build special barrier properties. Films are processed
Ionomer Poly Electrolyte. This polymer can be
with top of the line 3-, 5- or 8-layer blown film extrusion
used to create plastics and plastic products with
lines and proven manufacturing practices.
permanent, immediate and humidity independent
dissipative and low charging properties
(antistatic).
The film has insulative middle layer and outer or both
surfaces are dissipative made with. Thickness of the
skin layers can be as thin as extrusion process allows.
Advantages of Permanent Dissipative PE:
– true dissipative static decay properties vs. antistatic
– meets and exceeds IEC 61340-5-1 standard
– immediate functionality after processing
– permanent functionality
– works also on low humidity conditions < 20% RH
With multi-layer blown film extrusion lines it is possible
– uniform conductivity (no hot spots)
to manufacture new type of cost effective, dissipative
– non-corrosive
films. With Permanent Dissipative PE functionality is
– non-migratory
permanent, immediate and it works in low humidity
– low ionic out-gassing
conditions.
– RoHS confirming
– halogen free
Nefab can offer ready-made films for specific customer
needs. Barrier films (gas and vapor) with static
dissipative properties (ESD) are available. The maximum
– recyclable
– heat sealable
4
esd
protective
packaging
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
39
E S D P R O T E C T I V E PA C K A G I N G
ESD Bubble Wrap
Bubble cushioning not only protects against ESD
damage, but also provides excellent cushioning
properties.
– diameter of the bubbles ca. 10 mm, ca. 5 mm high
– pink bubble with ESD logo
– RS of dissipative pink bubble < 1011 ohms or black
conductive bubble < 105 ohms (ASTM D257)
– static decay < 2 sec. (FTMS 101, MTH 4046.1,
5.000 V-0 V)
– available on rolls and sheets and to customer
requirements
– pink bubble also available on rolls with tear
perforation and as bags
Dissipative Pink Bubble
Conductive Black Bubble
Item No.
Rolls
Item No.
Rolls
1601947
1601279
500 mm x 50 m
1000 mm x 50 m
1602366
1601277
600 mm x 100 m
1200 mm x 100 m
Other sizes available upon request
Other sizes available upon request
Dissipative PE Foam
Dissipative pink closed cell polyethylene foam
4
(PE) provides protection against physical shock,
vibration and abrasion in both in plant handling
esd
protective
packaging
and shipping. The dissipative PE foam does not
contain carbon but offers sufficient conductivity
to prevent ESD damage. The foam can be used
for shunting the leads of components and is also
suitable for production of tailor-made fittings of
boxes.
– density 20-35 kg/m3 (depending on application)
– RS < 1011 ohms (ANSI/ESD-S11.11)
– static decay < 2 sec. (FTMS 101, MTH 4046.1,
5.000 V-0 V)
– available on rolls, sheets and as tailor-made fittings
Dissipative PE Foam
Item No.
Description
Size
1602197
1603421
Foam Sheet
Foam Roll
550 x 500 x 6 mm
1200 mm x 175 m x 3 mm
Other sizes available upon request
40
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Conductive PE Foam
Permanent conductive, black, cross linked
polyethylene foam (PE) is ideal for shorting ICs.
This quality does not crumble or dust and does
not cause corrosion.
– density 30-60 kg/m3
– RS < 105 ohms (ASTM D257)
– static decay < 2 sec. (FTMS 101, MTH 4046.1,
5.000 V - 0 V)
– available in sheets and as tailor-made fittings
Conductive PE Foam
Item No.
Description
Size
1600876
1600878
Foam Sheet
Foam Sheet
800 x 600 x 10 mm
800 x 600 x 7 mm
Other sizes available upon request
Dissipative PU Foam
The soft and flexible properties of dissipative pink
polyurethane foam (PU) makes it an excellent
cushioning material for PCBs and other light
and/or irregularly shaped products. Dissipative
4
polyurethane foam features an optimal protection
against shock and vibration.
– density ca. 20-25 kg/m3
esd
protective
packaging
– RS < 1011 ohms (ASTM D257)
– static decay < 2 sec. (FTMS 101, MTH 4046.1,
5.000 V - 0 V)
– available as flat or convoluted sheets and as tailormade fittings
– sizes available upon request
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
41
E S D P R O T E C T I V E PA C K A G I N G
Component Boxes
Boxes for ESD safe packaging of components
are available in black conductive polystyrene and
Cortronic Eprom Boxes
– Cortronic shielding corrugated carton
in Cortronic shielding corrugated carton, with or
– 6 mm black conductive foam
without dissipative or conductive foam.
– yellow print with ESD warning text in German, French
and English
IC box
– made of conductive polystyrene
Cortronic Eprom Boxes
– ESD caution label with English text
Item No.
Inside dimension in mm
– available with pink dissipative and black conductive
PE foam
1601212
1601231 1601211 1603573
95 x 30 x 15
100 x 60 x 15
120 x 100 x 15
155 x 70 x 25
Component Boxes
4
esd
protective
packaging
Item No.
Description
Inside dimension in mm
1601470
IC box
107 x 82 x 14
Dip Strip Single Device Carrier
– conductive polystyrene
Cortronic SIMM Box
– Cortronic shielding corrugated carton
– suitable for 300 and 600 mil dip’s
– available with Cortronic folded insert
– available on strips of 5
– also available with 20 mm conductive convoluted
foam
Dip Strip Single Device Carrier
Item No.
1601466
Inside dimension in mm
75 x 40 x 20
Cortronic SIMM Box
Item No.
1601214
1600884
42
Inside dimension in mm
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
120 x 66 x 40
conductive convoluted foam
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
PCB Boxes
PCB boxes have been designed for ESD safe and
shock protecting packaging, transportation and
storage of single PCB’s. The boxes are lined with
dissipative pink convoluted polyurethane foam.
PCB box for single and double Eurocard
– one piece box
– lined with dissipative pink convoluted polyurethane
foam
– print with ESD warning symbol and text
PCB box for single and double Eurocard
Item No.
Inside dimension in mm
1602031
1602032
210 x 155 x 55
285 x 210 x 55
PCB FEFCO 0427 box
– a one piece box with loose dissipative pink
convoluted polyurethane foam
– available in a number of sizes and to customer
specification
PCB FEFCO 0427
Item No.
Inside dimension in mm
1601550 1601489 1601490 1601491 1601492 1602210 255 x 178 x 50
331 x 255 x 50
331 x 255 x 75
483 x 331 x 50
483 x 331 x 75
545 x 495 x 85
See also Cortronic PCB boxes.
PCB sleeve and slider box
– consists of slider lined with dissipative pink convoluted
polyurethane foam and an outer sleeve
– available in a number of sizes and to customer
specification
4
Cortronic Shielding Corrugated Carton
esd
protective
packaging
Cortronic features effective ESD safe packaging
for electronics. The ESD shielding layer is
integrated in the corrugated structure.
– RS outer layers 107-8 ohms (ANSI/ESD-S11.11)
– ESD shielding 10 nJ (ESD-S11.31)
– static decay < 1 sec. (FTMS 101, MTH 4046.1,
5.000 V - 0 V)
– environment friendly (re-usable, recyclable, water
soluble and biological degradable)
– available in a large number of stock versions
– available to customer specification, also with custom
print
– meets or exceeds IEC 61340-5-1
!"##"$%&'()
*+,,-.%/(0)
12"(30"4.)
!"##"$%&'()
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
43
E S D P R O T E C T I V E PA C K A G I N G
Cortronic Shielding Corrugated Carton
Cortronic PCB boxes
Item No.
Inside dimension in mm
1601233*
1601220*
1601213
1601221
1601222
1601223
1601224
1601615
1601226
1601227
1601228
1601229
1601621
40 x 40 x 15
62 x 62 x 25
100 x 55 x 25
183 x 127 x 38
178 x 127 x 64
190 x 135 x 40
250 x 191 x 38
250 x 191 x 110
267 x 216 x 64
300 x 300 x 100
380 x 280 x 60
420 x 220 x 40
420 x 220 x 65
* Is supplied erected, with black conductive and convoluted foam.
Dissipative pink convoluted foam for PCB boxes
4
Item No.
Size in mm
1600859
1600864
1600866
1600851
1600867
1601339
1600854
100 x 55 x 10
183 x 127 x 20
250 x 191 x 20
267 x 216 x 20
300 x 300 x 20
380 x 280 x 20
420 x 220 x 20
Cortronic storage boxes
esd
protective
packaging
Item No.
Inside dimension in mm
1603569
1601216
1603570
1601217
1603571
1601218
1601219
1603572
180 x 62 x 65
285 x 150 x 110
292 x 109 x 122
580 x 65 x 65
592 x 109 x 122
590 x 200 x 180
592 x 153 x 70
615 x 100 x 130
Cortronic Tube boxes for shipment and storage of IC tubes
44
Item No.
Inside dimension in mm
1603568
1601435
600 x 95 x 45
590 x 95 x 95
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Cortronic Shielding Corrugated Carton
Cortronic partitioned containers, with lid, for storage, transport and production of PCB’s
Item No.
Inside dimension
in mm
1603623
270 x 169 x 195
1603630
372 x 388 x 84
1603624
386 x 386 x 176
1603625
386 x 386 x 358
1603626
424 x 272 x 281
1603627
493 x 390 x 166
1603628
562 x 355 x 150
1603629
562 x 355 x 329
1603671
562 x 355 x 150
1603672
562 x 355 x 329
Compartment
L x B x H in mm
No. of
compartments
No. of partitions
trans
130 x 24 x 195
12
1
265 x 24 x 195
6
-
109 x 18 x 84
60
19
165 x 18 x 84
40
19
110 x 30 x 175
30
4
168 x 30 x 175
20
3
340 x 30 x 175
10
2
353 x 30 x 175
10
2
168 x 35 x 350
18
8
340 x 35 x 350
9
8
178 x 18 x 280
22
3
365 x 18 x 280
11
2
117 x 22 x 280
30
16
238 x 22 x 280
15
6
178 x 45 x 166
20
9
360 x 45 x 166
10
9
123 x 24 x 150
44
5
165 x 24 x 150
33
4
250 x 24 x 150
22
3
515 x 24 x 150
11
2
123 x 24 x 325
44
5
165 x 24 x 325
33
4
250 x 24 x 325
22
3
515 x 24 x 325
11
2
No partitions
No partitions
No. of partitions
long
5
5
4
3
9
9
9
9
3
2
10
10
3
2
3
2
10
10
10
10
10
10
10
10
4
esd
protective
packaging
Cortronic trays, stackable
Item No.
Inside dimension in mm
1601429
1603641
1603642
1601430
1601431
1601432
297 x 230 x 28
297 x 230 x 55
305 x 243 x 40
499 x 330 x 28
499 x 330 x 40
499 x 330 x 70
Can also be supplied with 1,5 mm dissipative pink PE foam
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
45
E S D P R O T E C T I V E PA C K A G I N G
Cortronic Shielding Corrugated Carton
The Customer-Store-Container is made of ESD
Customer Store Container
safe corrugated carton and complies with IEC
Item No.
Inside dimension in mm
1603645
1603646
1603647
1603648
1603649
1603650
1601984
1603651
1603097
1602871
362 x 251 x 60
362 x 251 x 100
362 x 251 x 139
362 x 251 x 220
551 x 362 x 60
551 x 362 x 100
551 x 362 x 139
551 x 362 x 172
551 x 362 x 220
550 x 365 x 400
61340-5-1. Ergonomic, very economic and
environmental friendly, the Customer Store
Container is an important logistic component for
the electronics industry.
The specially designed conductive stacking devices
make the Customer Store Container well stackable.
With its moisture resistant coating the Customer Store
Container can be used as storage container without
the necessity of further repacking. Damage and errors
which may occur with every handling will be minimized.
All articles except the 550x365x400 mm size are
available in red, green, blue and black colours. The
colours make identification of different flows – such
as red reject containers- or alignment with corporate
colours easy.
The Customer Store Container can be re-used many
times. Moreover, it is completely recyclable. Because
of the interesting cost aspects the Customer Store
Container features an economic means of packaging
to the electronic industry as well as an essential
component for innovative logistics.
Customer Store Container:
– ESD protective
4
– RS: 107-8 ohms
– lightweight, strong and stackable
– economic transport container
esd
protective
packaging
– also to be used as storage container
– re-usable
– meets IEC 61340-5-1
46
Customer Store Container Lid
Item No.
Inside dimension in mm
1603644
1602061
392 x 281 x 30
581 x 392 x 40
Partitions for the Customer Store Container
Item No.
Type
Size in mm
1603653
1603654
1603655
1603656
1603657
1603658
1603659
1603660
1603661
1603662
1603663
1603664
1603665
1603666
1603667
1603668
1603669
1603670
Short partition
Long partition
Short partition
Long partition
Short partition
Long partition
Short partition
Long partition
Short partition
Long partition
Short partition
Long partition
Short partition
Long partition
Short partition
Long partition
Short partition
Long partition
249 x 60
360 x 60
249 x 100
360 x 100
249 x 139
360 x 139
249 x 220
360 x 220
360 x 60
549 x 60
360 x 100
549 x 100
360 x 139
549 x 139
360 x 172
549 x 172
360 x 220
549 x 220
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Cortronic Shielding Corrugated Carton
Multibox
Item No.
Inside dimension in mm
1603024
1603025
1603026
1603027
365 x 269 x 109
565 x 365 x 109
565 x 365 x 209
565 x 365 x 309
Multibox Inside Lid
Item No.
Inside dimension in mm
1603246
1603248
363 x 267
563 x 363
Multibox Lid
Item No.
Inside dimension in mm
1601807
593 x 393 x 50
50
Plastic Conductive Containers
Conventional plastic containers are ideal to be
Plastic Conductive Containers
used as a method of transport and storage in
Item No.
the mechanical industry; however they are not
suitable for the electronic industry. Our Plastic
Conductive Containers has the characteristics to
impede the formation of electrostatic charges or
to discharge them.
– black conductive polypropylene copolymer
– RS < 104 ohms (DIN 53482)
5020
Outside dimension in mm 1603279
300 x 200 x 120
1602670
300 x 200 (lid)
1603282
400 x 300 x 55
1602387
400 x 300 x 78
1602398
400 x 300 x 120
1603283
400 x 300 x 170
1603284
400 x 300 x 220
1603285
400 x 300 x 325
1603073
400 x 300 (lid)
1603287
600 x 400 x 78
1603288
600 x 400 x 120
1601997
600 x 400 x 170
1601726
600 x 400 x 220
1601996
600 x 400 x 325
1602374
600 x 400 x 430
1601714
600 x 400 (lid)
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
20
Inside dimension
0
in5mm
260 x 160 x 100
4
20
335 x 255 x 35
355 x 255 x 58
355 x 255 x 100
355 x 255 x 150
355 x 255 x 200
355 x 255 x 305
esd
protective
packaging
555 x 355 x 58
555 x 355 x 100
555 x 355 x 150
555 x 355 x 200
555 x 355 x 305
555 x 355 x 410
W W W . N E F A B . com
47
E S D P R O T E C T I V E PA C K A G I N G
Conductive Corrugated PP
There is a wide range of thicknesses and density
which, together with the ability to produce this
material with conductive characteristics, enables
a high degree of customization.
– durable & reusable
– moisture and water resistant
– clean and washable
– 100% recyclable
– lightweight
– Rs <105 ohms
– thickness: 2 to 14 mm
– density: 250 to 3.000 g/m2
Vacuum Thermoformed Trays
Vacuum Thermoformed Trays are designed to
pack and handle a wide range of ESD sensitive
products. The tray can be designed with the exact
material, gauge and customized design, to adapt
4
to mechanical and ESD protection requirements.
– materials used: PS, PET, ABS, HDPE
esd
protective
packaging
– thickness: from 0.4 mm to 6.5 mm
– available in Dissipative; Conductive and Cleanroom
48
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Conductive Pallets
ESD events affect the electronics packaging
Conductive Pallets
industry at all levels of production. The
Item No.
Size in mm
Description
Conductive pallets provide effective protection
1603953
1603954
1200 x 800
1200 x 800
HDPE - Hygienic Version
HDPE - Pool Version
for handling electronic components in assembly,
storage and processing areas.
– Rs: 104 ohms
– black colour
– fully closed or open deck
1603954
1603953
4
ESD Airpad
esd
protective
packaging
ESD Airpad is made from two rolls of flat film
which are inflated with air, heat sealed and
perforated. A good solution for applications where
blocking & filling for ESDS devices is needed.
– RS: 109 to 1011 ohms
– maximum product protection
– lightweight
– environment friendly
ESD Airpad
Item No.
Size in mm
1600206
420 x 160
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
49
E S D P R O T E C T I V E PA C K A G I N G
Membrane Boxes
Delicate objects can safely be packed in the
patented membrane boxes. Whether the objects
are round, pointed, oddly-shaped or of various
sizes, the membrane box is safe and protects
the objects against oxidation. The transparent
packaging makes easy visual checking possible.
A single membrane box consists of two halves. They
are made from polystyrene, fitted with a very thin
polyurethane membrane. The packaged items are
freely suspended between both membranes. Boxes
can be closed by hinges and clasps.
– made of polystyrene
– dissipative version available
– Cleanroom version available
– reusable
Membrane Boxes
4
esd
protective
packaging
50
Item No.
Size in mm
(length x width x half height)
Description
1601516
1601518
1601530
1602385
1602388
1602389
1602680
1602749
1602750
1602818
1602879
1602880
1602881
1602882
1602883
1602884
1602885
1602911
1604616
1604617
1601567
1601727
1601517
1601519
1601547
1601692
1602908
100 x 100 x 25
Cleanroom
100 x 50 x 8
Cleanroom
150 x 150 x 25
Cleanroom
200 x 200 x 25
Cleanroom
150 x 100 x 37,5
Cleanroom
250 x 200 x 50
Cleanroom
125 x 125 x 25
Cleanroom
175 x 75 x 25
Cleanroom
100 x 75 x 25
Cleanroom
150 x 150 x 50
Cleanroom
200 x 175 x 87,5
Cleanroom
200 x 200 x 75
Cleanroom
200 x 200 x 100
Cleanroom
225 x 200 x 100
Cleanroom
250 x 200 x 50
Cleanroom
250 x 200 x 100
Cleanroom
275 x 200 x 75
Cleanroom
125 x 125 x 12,5
Cleanroom
150 x 150 x 12,5
Cleanroom
150 x 100 x 8
Cleanroom
125 x 125 x 12,5
Dissipative
39 x 39 x 17,8 (total height) Dissipative
150 x 150 x 50
200 x 150 x 25
100 x 75 x 12,5
39 x 39 x 17,8 (total height)
125 x 125 x 25
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
E S D P R O T E C T I V E PA C K A G I N G
Cleanroom Packaging
The electronic industry increasingly uses
Cleanroom flexible packaging in the manufacture
of wafers, chips, diskdrives and MR heads.
Cleanliness
This packaging must be sealable, should hold
a vacuum and should act as a barrier against
outside threats.
One problem typically seen in the Cleanroom is the
generation of static charges through tribocharging, both
Particle
size (μm)
1
5
on the packaging film and the product being packed.
Static charges on the material can lead to electrostatic
attraction of particulate to the material and the product.
10
Therefore dissipative materials and/or ionization may be
required for product protection.
Available Cleanroom films as polyethylene and a
number of laminates such as Static Shielding and Dry
25
packaging barriers. Those films can be supplied as
tubing, sheeting, bags and shrouds.
50
100
Maximum allowable
concentration limits for particles
of stated size and larger
Particles per 0.1 m2 of surface
area or 0.1 liter of gas or liquid (N)
1
1
1
2.8
2
2.3
5
1
1
8.4
2
6.9
5
2.9
10
1
2
53.1
5
22.7
15
3.3
25
1
5
166
15
24.6
25
7.2
50
1
5
1780
15
264
25
78.4
50
10.7
10
1
4
Cleanroom Packaging
Item No.
Description
Size
1601673
1602259
1602572
1602182
1601939
1601940
1602211
1602212
1602925
1602183
1601955
1602073
1601680
1601752
1603956
1603904
1601094
1604091
Transparent LDPE Bag
Transparent LDPE Bag
Transparent LDPE Bag
Transparent LDPE Bag
Dissipative LDPE Bag
Dissipative LDPE Bag
Dissipative LDPE Bag
Dissipative LDPE Bag
Dissipative LDPE Bag
Dissipative LDPE Bag
Dissipative LDPE Bag
Dissipative LDPE Bag
Static Shield Bag
Transparent LDPE Roll
Transparent LDPE Roll
Transparent LDPE Roll
Dissipative LDPE Sheeting
Static Shield Roll
360 x 750 mm – 150 µm
170 x 400 mm – 150 µm
170 x 200 mm – 150 µm
400 x 500 mm – 100 µm
406 x 645 mm – 150 µm
610 x 945 mm – 150 µm
380 x 450 mm – 150 µm
203 x 254 mm – 150 µm
152 x 203 mm – 150 µm
85 x 130 mm – 150 µm
1.000 x 1.200 mm – 80 µm
1.200 x 1.400 mm – 80 µm
1.000 x 1.200 mm – 80 µm
1.372 mm x 152 m – 150 µm
140 mm x 250 m – 100 µm
100 mm x 250 m – 100 µm
1.520 mm x 152 m – 100 µm
1.400 mm x 300 m – 80 µm
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
esd
protective
packaging
|
W W W . N E F A B . com
51
I O N I Z AT I O N E Q U I P M E N T
Ionization Equipment
5
Air ionization complements and completes any program that intends to eliminate
ionization
equipment
all electrostatic charge sources. In many areas, such as Cleanrooms and mini
environments, air ionization is the only practical method of static control. Ionization can
neutralize static charges on insulative materials which cannot be grounded and can be
considered as the safety net for effective ESD Control.
52
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
I O N I Z AT I O N E Q U I P M E N T
Ionization
Equipment
Aerostat PC
Aerostat XC
Aerostat Guardian
Top Gun
54
54
55
55
5
ionization
equipment
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
53
I O N I Z AT I O N E Q U I P M E N T
Aerostat PC
The Aerostat PC provides superior static charge
– ozone production 0,005 ppm
decay rates over a targeted work surface area.
Small, quiet, and lightweight, yet uncompromising
– audible noise at low fan speed 50 dB, at high fan
speed 57 dB
in performance, the Aerostat PC is easy to
– size 14 x 21 x 8 cm
position. It is designed to provide optimum
– weight 2,4 kg
protection from the destructive effects of ESD and
to prevent contaminants from being attracted to
Aerostat PC
surfaces.
Item No.
Description
The Aerostat PC features variable fan speed control and
1600869
Aerostat PC
patented emitter point cleaner for easy maintenance. A
status light verifies the presence of ionization.
Typical applications: electronics assembly, medical
device assembly and packaging, semiconductor and
disk drive manufacturing.
– air volume min. 1000 l/min., max. 2000 l/min.
– heated air temperature in relation to ambient air:
+ 14° C at low fan speed,
+ 6° C at high fan speed
– effective coverage 30 x 150 cm
– discharge time 1,5 sec.
Aerostat XC
The Aerostat XC provides excellent coverage,
– discharge time 1 sec.
stability of balance and rapid static charge decay
– ozone production 0,005 ppm
times. The Aerostat XC can be used in a variety of
electronics environments, including Cleanrooms.
– audible noise at low fan speed 52 dB, at medium fan
speed 58 dB, at high fan speed 64 dB
The Aerostat XC features patented emitter
– adjustable mounting bracket
point cleaner, an ionization status light, and an
– size 40 x 11 x 20 cm
integrated heater. The Aerostat XC operates
– weight 7,9 kg
on AC technology to provide stable balance
performance over time.
Typical applications: electronics assembly, medical
device parts assembly and packaging, disk drive
5
Aerostat XC
Item No.
Description
1600870
Aerostat XC
manufacturing.
– 3-speed fan
ionization
equipment
– air volume min. 2000 l/min., medium 2700 l/min.,
max. 3.500 l/min.
– heated air temperature in relation to ambient air:
+ 6° C at low fan speed,
+ 5° C at medium fan speed,
+ 4° C at high fan speed
– effective coverage 90 x 180 cm
54
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
I O N I Z AT I O N E Q U I P M E N T
Aerostat Guardian
The Aerostat Guardian provides superior
static charge decay efficiency over an entire
Aerostat PC, Aerostat XC and Aerostat Guardian
– 230 V, 50 Hz.
worksurface area. Equipped with task lighting
– heat with on/off switch
and an integrated heater, the guardian offers
– ion balance 0 V +/- 5 V
user-friendly operation while effectively protecting
Featuring patented inherent balance and built-in
– discharge time measured according to ANSI/ESD
S.3.1, at fan speed high and in the center of the
ionizer
emitter point cleaners, the guardian is the lowest
– calibration not necessary
maintenance overhead ionizer available.
– patented emitter point cleaner
sensitive components from ESD damage.
Typical applications: disk drive manufacturing, medical
device parts assembly and packaging, semiconductor
manufacturing.
– ionization light
– operate on AC technology to provide stable balance
performance over long periods of use
– CE compliant
– air volume min. 4500 l/min., max. 9000 l/min.
– weight 5,7 kg
– heated air temperature in relation to ambient air:
– also available in Cleanroom version
+ 14° C at low fan speed,
+ 6° C at high fan speed
Aerostat Guardian
– effective coverage 60 x 120 cm
Item No.
Description
1600865
Aerostat Guardian
– discharge time 3 sec.
– ozon production 0,02 ppm
– audible noise at low fan speed 50 dB, at high fan
speed 60 dB
– on/off switch with mains voltage indication
– size 109 x 10 x 17 cm
Top Gun
The Top Gun is a high-performance ionizing air
– Top Gun Sidekick for “hands free” working
gun designed for electronics and Cleanroom
applications. The Top Gun features high blow-
– weight Top Gun and cable 213 cm long, 0,185 kg,
weight control module 2,7 kg
off force to provide efficient cleaning and rapid
– size control module 13,2 x 16,4 x 8,5 cm
static charge decay. A filter at the exit of the gun
– max. pressure 7 bar (CDA or dry nitrogen)
ensures that the air is clean.
– CE compliant
– 230 V, 50/60 Hz., 0,05 A
– flow 68 l/min. at 2 bar, 130 l/min. at 4 bar, 210 l/min.
at 7 bar
Top Gun
Item No.
Version
– filter 0,01 micron, ensures air is clean
1601040
1601041
1601720
cable 213 cm
cable 426 cm
Top Gun Sidekick
– blow-off force 180 g/cm2, 7 bar, 76 mm, Ø 51 mm
target
5
– ion balance 0 V +/- 15 V
ionization
equipment
– discharge time 1,3 sec., 15 cm, 2 bar and 0,5 sec., 5
cm, 4 bar (1000 V - 100 V)
– ozone production 0,001 ppm, measured at 450 mm
from Top Gun, 1 bar
– audible noise 76 dB at 2 bar, 89 dB at 4 bar and 97
dB at 7 bar, measured at 60 cm from the nozzle
– ionization indicator light
– cable 213 cm or 426 cm long
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
55
TEST EQUIPMENT
Test and Measuring Equipment
In order to have an effective ESD Control Program continuous testing and
measuring is important. We have a wide range of test equipment to verify the
correct functioning of static control systems.
6
test
equipment
56
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
TEST EQUIPMENT
Test and
­Measuring
Equipment
Static Locator
Static Field Meter
Surface Resistance Meter
Surface Resistance Kit
Concentric Ring Probe
Ionizer Performance Analyzer
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
58
58
59
59
60
60
57
6
test
equipment
TEST EQUIPMENT
Static Locator
The Static Locator measures instantly and reliably
whether static charges are present, how much
and in which polarity
– measures charges from 0 - 30 kV
– accuracy +/- 10%
– designed for close in repetative readings (± 1%)
– supplied with a carrying case
– CE compliant
Static Locator
Item No.
Size in cm
1601047
11,1 x 6,7 x 3,3
Static Field Meter
The FMX-003 is a convenient, compact and
pocketsize electrostatic Field Meter. With this
Field Meter you can measure and store the field
strength and polarity. It enables you to carry out
measurements in awkward places. The correct
measuring distance is displayed by two integrated
LED’s. The electrically conductive plastic housing
with an earth connection fitted at the side ensures
accurate measurements.
– digital and bar graph display indicates field polarity
and intensity
– battery condition display
– easy plate attachment for ion balance measurement
– auto shut off after 5 minutes
– portable and lightweight
– auto-ranging digital display
– includes conductive ABS case, coil cord
for grounding and adapter for ion balance
measurements.
Static Field Meter FMX-003
6
test
equipment
58
Item No.
Description
1601046 Static Field Meter
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
TEST EQUIPMENT
Surface Resistance Meter
The Surface Resistance Meter is appropriate for
auditing static control items. Measures conductive,
dissipative and insulative items. The meter is battery
powered and simple to use.
– measures surface resistance and resistance to ground
– uses parallel metal electrodes
– ranges 103-12 ohms
– accuracy +/- 10%
– uses a 9 V alkaline battery
– supplied with a carrying bag
– CE compliant
– Complies with IEC 61340-5-1
Surface Resistance Meter
Item No.
Size in cm
1600964
13 x 7 x 2,5
Surface Resistance Kit
The Surface Resistance KIT contains all the
Surface Resistance Kit
needed components to make testing to ESD
Item No.
Version
1603393
1604461
With two electrodes
With Concentric Ring Probe
packaging and mats surfaces simple and
accurately.
– measures surface resistance, resistance to ground
and point to point resistance
– comes with two 2,5 kg electrodes or a Concentric
Ring Probe
– ranges 103-13 ohms
– analog display
– LED’s for quick reference of conductive, dissipative
and insulative
– automatic ranging of test voltage: 10 V for
conductive surfaces, 100 V for dissipative surfaces
– override switch can be used for measuring at 10 V
only
– accuracy +/- 10%
– uses a 9 V alkaline battery
– indicator light for low battery
– supplied in a metallic/conductive case
– complies with IEC 61340-5-1
– CE compliant
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
59
6
test
equipment
TEST EQUIPMENT
Concentric Ring Probe
The Concentric Ring Probe is the ideal equipment
to measure the surface resistance of packaging
material.
– measures surface resistance according to IEC
61340-5-1
– can be used in combination with the Surface
Resistance Kit
– weight 2,5 kg
– inside diameter electrode 30 mm +/- 0,5 mm
– outside diameter electrode 57 mm +/- 0,5 mm
Concentric Ring Probe
Item No.
Description
1600962
Concentric Ring Probe
Ionizer Performance Analyzer
The Ionizer Performance Analyzer is a low-cost
and highly portable alternative to a chargedplate monitor for periodic verification of ionizer
performance. It permits ionizer testing at the work
location without the need to remove the ionizer
from service for testing.
- manual or automated tests
- optional 6-inch plate attachment (Model 287/22C)
achieves1:1 correspondence with standard chargedplate monitor test results
- integral temperature and relative humidity sensors to
capture environmental data during test
- test results correlate to standard tests performed
using a charged-plate monitor in accordance with
ESD Association standard S3.1
- integrates decay timer lacking in ionizer test kits for
Field Meters
Ionizer Performance Analyzer
6
test
equipment
60
Item No.
Description
1601051
Ionizer Performance Analyzer
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
|
W W W . N E F A B . com
Addresses
Sweden
Belgium
NEFAB Packaging Belgium N.V.
Skaldenstraat 121, F1, Harbour 3230
9042 DESTELDONK (GENT)
Tel: +32(0)9 231 82 82
Fax: +32(0)9 231 82 39
Internet: www.nefab.be
E-mail: info@nefab.be
Common for all units in Sweden:
Tel: +46(0)771-590 000
Internet: www.nefab.se
www.nefab.com
HEAD office
NEFAB AB
Box 2184, SE-550 02 JÖNKÖPING
Visiting address: Slottsgatan 14
Fax: +46(0)36-15 04 44
E-mail: info@nefab.com, info@nefab.se
denmark
NEFAB Danmark A/S
Köbenhavnsvej 69, DK-4000 ROSKILDE
Tel: +45 43 54 30 13
Fax: +45 43 54 30 73
Internet: www.nefab.dk
E-mail: mail@nefab.dk
NEFAB Packaging Sweden AB
SE-822 81 Alfta
Visiting address: Nordgrens väg 5
Fax: +46(0)271-590 10
E-mail: kundservice@nefab.se
estonia
NEFAB Eesti AS
Killustiku 6, 75303 Lagedi,
Rae Vald HARJUMAA
Tel: +372-634 9800
Fax: +372-634 9801
Internet: www.nefab.ee
E-mail: info@nefab.ee
NEFAB Production Runemo AB
SE-822 81 Alfta
Visiting address: Nordgrens väg 5
Fax: +46(0)271-590 10
E-mail: nprorder@nefab.se
FINLAND
Oy NEFAB AB
Sienitie 5 FI-00760, HELSINKI
Tel: +358 10 830 1100
Fax:
+358 10 830 1101
Internet: www.nefab.fi
E-mail: info@nefab.fi
NEFAB Logistics AB
Box 7, SE-566 21 HABO
Visiting address: Snickargatan 10
Fax: +46(0)36-497 10
E-mail: logistics@nefab.se
NEFAB PlyPak AB
Box 7, SE-566 21 HABO
Visiting address: Snickargatan 10
Fax: +46(0)36-497 10
E-mail: plypak@nefab.se
france
NEFAB Packaging France S.A.S
RN 20 Nord, F-41300 SALBRIS
Tel: +33(0)2 54 96 82 55
Fax: +33(0)2 54 96 35 77
Internet: www.nefab.fr
E-mail: info@nefab.fr
NEFAB LogPak AB
Box 7, SE-566 21 HABO
Visiting address: Snickargatan 10
Fax: +46(0)36-497 30
E-mail: logpak@nefab.se
germany
NEFAB Packaging Germany GmbH
Raiffeisenstraße 10, 71696 Möglingen
Tel: +49 7141 49 00 40
Fax: +49 7141 49 00 42
Internet: www.nefab.de
E-mail: info@nefab.de
NEFAB Specialemballage AB
Kraftleden, SE-746 40 BÅLSTA
Fax: +46(0)171-509 69
E-mail: specialemballage@nefab.se
Great britain
NEFAB Packaging U.K. Ltd
151 Silbury Boulevard,
Milton Keynes, MK9 1LH
Tel: +44-(0)1908-424 300
Fax: +44-(0)1908-424 301
Internet: www.nefab.co.uk
E-mail: info@nefab.co.uk
NEFAB Supply HB
SE-822 81 ALFTA
Visiting Address: Nordgrens väg 5
Fax: +46(0)271-590 50
E-mail: supply@nefab.se
NEFAB Teknik AB
SE-822 81 ALFTA
Visiting Address: Nordgrens väg 5
Fax: +46(0)271-590 30
E-mail: teknik@nefab.se
hungary
NEFAB Packaging Hugary Kft.
Könyves Kálman krt. 76
1087 BUDAPEST
Tel: +36 1 210 1487
Fax: +36 1 459 07 32
Internet: www.nefab.hu
E-mail: info@nefab.hu
EUROPE
austria
NEFAB Eder Verpackungstechnik GmbH
Lastenstraße 38 – City Tower 1, A-4020 Linz
Tel: +43/732-660602-0
Fax: +43/732-660602-20
E-mail: info@nefab.at
Internet: www.nefab.at
N E FA B – T H E G L O B A L PA R T N E R F O R C O M P L E T E PA C K A G I N G S O L U T I O N S
italy
NEFAB Srl
Via Magretti 22
200 37 Paderno Dugnano MILAN
Tel: +39-02 99048520
Fax: +39-02 99048521
Internet: www.nefab.it
E-mail:
info@nefab.it
|
W W W . N E F A B . com
61
norway
NEFAB Packaging Norway A/S
Lersbrygga 16, N-3070 Sande i Vestfold
Tel: +47(0)33-78 58 50
Fax: +47(0)33-78 58 51
Internet: www.nefab.no
E-mail: info@nefab.no
poland
NEFAB Packaging Poland Sp.zo.o
ul. Malinowska 28, 83-100 TCZEW
Tel: +48-58 7777 950
Fax: +48-58 7777 953
Internet: www.nefab.pl
E-mail: info@nefab.pl
Portugal
NEFAB RA-Produtos de Embalagem, Lda
Rua do Pinhal n.° 281/301, Lugar da Minhoteira
4470-640 MOREIRA DA MAIA
Tel: +351 22 943 92 20
Fax: +351 22 942 80 10
Internet: www.nefab.pt
E-mail: info@nefab.pt
romania
NEFAB Packaging Romania SRL
Str.Andrei Saguna no.3,
bl.U5 ap.20, Timisoara
Tel: +40.256.283423
Fax: +40.256.283423
E-mail:
info@nefab.ro
Internet: www.nefab.com
slovakia
NEFAB Packaging Slovakia s.r.o.
Industrial Park Gena Gena 5361/59
SK-934 01 LEVICE
Tel: +421 36 63 56 500
Fax: +421 36 63 56 517
Internet: www.nefab.sk
E-mail:
info@nefab.sk
Spain
NEFAB S.A.
Calle Gutenberg S/N, Pol. Ind. El Lomo
Getafe, 28906 MADRID
Tel: +34-91-696 6911
Fax: +34-91-696 7442
Internet: www.nefab.es
E-mail: info@nefab.es
Mediterranean Goods S.A. Packaging
c/ Lincoln n°11 ático 4a
08006 BARCELONA
Tel: +34 93-237 11 25
Fax: +34 93-419 16 28
Internet: www.medgoods.es
E-mail:
info@informaticaedgoods.es
Nefab Plywood Pontevedra, S.L.
Ctra. de Barbudo s/n
36828 Ponte caldelas (Pontevedra)
Tel:
+34 986 75 01 50
E-mail: plywood.spain@nefab.se
the netherlands
NEFAB Bijl B.V.
Visiting address: Hermesweg 28
Postbus 53, NL-3770 AB BARNEVELD
Tel: +31(0)342-49 01 47
Fax: +31(0)342-41 68 45
Internet: www.nefab.nl
E-mail: info@nefab.nl
North & South America
Brazil
NEFAB Embalagens Ltda.
Rod. Regis Bittencourt, Rodoanel
Estrada São Judas 35 Jardim das Oliveiras
06817-170 EMBÚ, SÃO PAULO SP
Tel: +55(0)11 4785-5050
Fax: +55(0)11 4785-5051
Internet: www.nefab.com.br
E-mail: embalagens@nefab.com.br
Canada
NEFAB Inc. (Canada)
211 Jameson Drive
Peterborough, Ontario K9J 6X6
Tel: +1 705-748-4888
Fax: +1 705-748-0034
Internet: www.nefab.ca
E-mail: mail@nefab.com
USA
NEFAB, Inc. (USA)
3105 N. Ashland Avenue, #394
Chicago, IL 60657
Tel: +1-800-565-0901
Fax: +1 705 748 0034
Internet: www.nefab.us
E-mail: mail@nefab.com
ASIA
CHina
Common for all units in China:
Internet: www.nefab.com.cn
E-mail: info@nefab.com.cn
NEFAB Asia Pacific Office – Shanghai, China
Add: No.158, GuiQiao Road, JinQiao Export
Processing Zone, PuDong, Shanghai
P.R China 201206
Tel: +86 21 5899 5218
Fax: +86 21 5899 5303
NEFAB Packaging Engineering (WuXi) Co.,Ltd
Add: No.16 Xing Chuang Road 4, Wuxi-Singapore
Industrial Park, Wuxi, Jiangsu Province
P.R. China 214028
Tel: +86 510 8295 2288 / 0510 8520 0310
Fax: +86 510 8520 0402
NEFAB Packaging Engineering (Wuxi) Co., Ltd.
Wuxi SU CPS
Address: ChunMing Industrial Park, XinMing Road,
Fang Qian Town, Wuxi, Jiangsu Province
P.R. China 214028
Tel: +86 510 8865 1832
Fax: +86 510 8865 1820
NEFAB Packaging Engineering (Wuxi) Co., Ltd.
Shanghai Sales Office
Add: No.158,GuiQiao Road,JinQiao Export
Processing Zone, PuDong,Shanghai
P.R China 201206
Tel: +86 21 5899 5218
Fax: +86 21 5899 5303
NEFAB Packaging Engineering (Wuxi) Co., Ltd.
HangZhou Sales Office
Add: Room110 1# Zhongheng Science Park,
No.4028 Nanhuan Road, Binjiang District,
Hangzhou, P.R China 310053
Tel: +86 571 8669 1140
Fax: +86 571 8669 1141
NEFAB Packaging Engineering (Wuxi) Co., Ltd.
SuZhou Sales Office
Add: Room315 Bailing Commercial Center, No.168
Xinghai Street,Suzhou Industrial Park, Suzhou,
P.R China 215021
Tel: +86 512 6295 0715
Fax: +86 512 6296 0717
LangFang NEFAB Packaging Engineering Co.,Ltd
Add: No.28, No 2 Road, Langfang Economy &
Technology Development Zone, P.R China 065001
Tel: +86 316 597 7008
Fax: +86 316 597 7010
Langfang NEFAB Packaging Engineering Co., Ltd
Beijing Sales Office
Add: Room C112 Lonsdale Center, 5 Wanhong
Road, Chaoyang District, Beijing, P.R. China 100015
Tel: +86 10 6433 2618
Fax: +86 10 6434 5773
Langfang NEFAB Packaging Engineering Co., Ltd
TianJin Sales Office
Add: Room 312, Fengnian Village Community
Services Center, Dongli District, Tianjin,
P.R. China 300300
Tel: +86 22 2497 4172
Fax: +86 22 2497 4172
Nefab Packaging Engineering (DongGuan) Co.,
Ltd
Add: Sanheng Road - turn in by Shuilang Road,
DaTang Village, DaLingShan Town, Dongguan,
Guangdong, P.R.China, 523837
Tel: +86 769 8278 4111
Fax: +86 769 8278 4110
Nefab Packaging Engineering (DongGuan) Co.,
Ltd – Zhuhai Sales office
Add: Room 3-301, building No.7, C part of Riviera
Residential community, Doumen area, Zhuhai,
Guangdong,P.R.China, 519180
Tel: +86 756 5311 001/5311 002
Fax: +86 756 5311 009
Nefab Packaging Engineering (DongGuan) Co., Ltd – BaoAn Office
Add: Taifeng Building 702B, Qianjin Road, Xin’an
Street, Baoan, Shenzhen,GuangDong, P.R.China,
518101
Tel: +86 755 2775 0617
Fax:
+86 755 2775 1047
Nefab Packaging Engineering(DongGuan)Co.,
Ltd – GuangZhou Office
Add: Room1201, F, DongJing Park,
YuanCunErHeng Road,TianHe Strict, GuangZhou,
GuangDong,P.R.China, 510655
Tel/Fax: +86 20 8554 9055
india
NEFAB India Private Ltd.
401, Galleria Building, 4th floor, ’A’ Wing,
Hiranandani Gardens, Powai, Mumbai - 400 076
Tel: +91-22 67108862
Fax: +91-22 67108861
Internet: www.nefab.com
E-mail: india@nefab.se
NEFAB India Private Ltd.
Production Site: 277-278, Sector 7, IMT, Manesar
Gurgaon- 122 050
Tel: +91 (0) 124 4368622
Fax: +91 (0) 124 4368621
Malaysia
NEFAB (Malaysia) Sdn Bhd
No. 201, Block A4,
Leisure Commerce Square,
No. 9, Jalan PJS 8/9,
46150 Petaling Jaya,
Selangor, Malaysia.
Tel:
+603 78773178
Fax: +603 78773198
Singapore
NEFAB Singapore Pte Ltd
No.8, Tuas View Loop Singapore 637674
Tel: +65 862 0178
Fax +65 861 9628
E-mail: nefab@singnet.com.sg
Internet: www.nefab.com
representative offices
czech republic
NEFAB Packaging Slovakia s.r.o.
Representative Office Czech Republic
K Vypichu 1086
252 19 Rudná u Prahy
Tel: +420 311 512 986/990
Fax: +420 311 513 061
Internet: www.nefab.cz
E-mail: info@nefab.cz
russia
NEFAB Supply HB
Representative Office
Italyanskava 5, 191 186 ST. PETERSBURG
Tel: +7 812 346 73 12
Fax: +7 812 346 73 16
Internet: www.nefab.com
E-mail: supply@nefab.se
Thailand
NEFAB in Thailand
16/3, 16th Floor Vibhavadi Tower 51/3,
Ngamwongwan Road, Chatchuchak, Bangkok
10900
Tel: +66 2 941 2868
Fax: +66 2 941 2869
E-mail: thailand@nefab.com
Internet: www.nefab.com
Vietnam
NEFAB in Vietnam
N28-D2 Street Van Thanh Bac, Ward 25,
Binh Thanh District Ho Chi Minh City
Tel: +84 (0)8 898 3032
Fax: +84(0)8 898 2252
E-mail: vietnam@nefab.com
Internet: www.nefab.com
Cooperative partners
australia
Integra Packaging Pty Ltd
70 Meroo Road
Bomaderry, NSW 2541
Tel: +61 (0) 2 4421 2935
Fax: +61 (0) 2 4423 1437
Internet: www.integrapackaging.com
Email: info@integrapackaging.com
Japan
Ailop Corp.
3-6-9 Tsukamoto Yodogawa-ku. Osaka 532
Tel:
+81 (0)6 6308 5847
Fax: +81 (0)6 6300 1259
Internet: www.ailop.co.jp
Mexico
Madereria Del Bajío, S.A. de C.V.
Privada de la Concordia No. 3
Zona Industrial La Montana,
C.P. 76150 Querétaro, QUERÈTARO
Telephone: +52-44-221 70138
Fax: +52-44-221 73096
South Korea
Cape Industries Ltd.
CAPE Bldg 52-9 Namsang Dong Kumjung-Ku,
Pusan
Tel: +82(0)51 583 9169
Fax: +82(0)51 583 9168
Internet: www.capeind.com
E-mail: topliner@capeind.com
Switzerland
Egolf Verpackungs AG
Brüelhalde 1, CH-8370 SIRNACH
Tel: +41(0)71-969 4100
Fax: +41(0)71-969 4101
Internet: www.egolfverpackungsag.ch
E-mail: sirnach@egolfverpackungsag.ch
www.nefab.com