FastLane®
Power Technical Specification
Boston’s FastLane Modular Wiring Systems offer UL listed ‘plug & play’ capabilities to
your power infrastructure to reduce installation time and labor costs. Our wiring
­solutions are custom configured for each customer’s needs and designed to handle
general purpose (GP) and isolated ground (IG) power circuits, while still allowing for
100% functional, pre-tested modular installation. For new store construction or
­remodeling projects, modular wiring systems bring power from the main source to
your selling floor in a snap.
Main Distribution Box (MDB)
ENCLOSURE
THHN
• Material: 0.060” cold-rolled steel
• Weight: 10lbs per 10’
• Finish: black powder coat
• Meets voltage drop and bundled cable requirements
for 20 amp power circuits
• Internal wiring: solid copper 90°C insulated type
THHN
• Standard dimensions: 10” x 10” x 3”
• Optional FastConnect Homerun, see datasheet for
details
CONNECTOR
COMPLIANCE
• Connector housing: riveted, zincplated 0.060” coldrolled steel
• IBEW-assembled, UL listed and labeled
• Meets requirements of NEC Article 604
• Contact Housing: polycarbonate, UL9 V-2, keyed as
per NEC 604.6 (C)
• Acceptable for use in environmental air-handling
spaces other than ducts or plenums per NEC Article
300.22 (C)
HOMERUN CABLE
• Cable type: MC
• Armor: interlocked galvanized steel
• Phase and ground conductors: #10 AWG solid copper,
90°C insulated type THHN
• Neutral conductors: #8 AWG stranded copper, 90°C
insulatedtype
4-port dual MDB
6-port dual MDB
U.S. Headquarters • Medford, MA
Tel. 781-395-7417 (main) or 800-225-1633 (toll-free)
Fax 781-391-5766 • sales.usa@boston-group.com
www.boston-group.com
6-port single MDB
European Headquarters (EMEA) • Rotterdam, NL
Tel. +31 (0)10 238 1400 • sales.emea@boston-group.com
© Boston Group 2013
FastLane®
Power Technical Specification
Extender, Whip-end, and
Distribution Cables
• Cable type: MC (Optional PVC coating)
• Conductors: #12 AWG solid copper,
90°C insulated type THHN
• Typical cable weight: 3lbs per 10’
Plug-2-FastLane
Single Head Whip-End
Extender Cable
Dual Head IG/GP
Extender Cable
Single Head Distribution
Extender Cable
(Dual Heads option available)
(GP/GP option available)
(Dual Heads option available)
CONNECTOR
• Color coded and keyed to eliminate
inter-voltage connections
COMPLIANCE
• Rating: 20-Ampere branch circuits, isolated
ground (IG) and general purpose (GP)
Power Splitter
Single Head
Extender Cable
Single Head
Lighting Cable
Switch Module
with Old Work Style
Power Tee
with Whip-End
Box, Switch, and Dimmer
Receptacle Options
RECEPTACLE BOX WITH POWER EXTENDER CABLES (A)
(A) EXAMPLE OPTIONS
• Enclosure: galvanized 4” square device box with raised
device cover and mounting bracket for easy installation
• Whip-end extender cables: type MC cable using #12 AWG
solid copper, 90°C type THHN conductors
• IBEW assembled
BOSTON POWERPOLES (B)
• Configurable with a variety of switching, lighting and
­receptacle options; see datasheet for details
Surface Mount
Old Work Style
Flush Mount
BOSTON PLUGSTRIPS (C)
• Configurable with a variety of switching and receptacle
options; see datasheet for details
(B)
(C)
BOSTON GONDOLA POWERSTRIPS (D)
• Configurable for gondola shelving with a variety of switching and receptacle options; see datasheet for details
COMPLIANCE
• Pre-wired and tested
• UL listed and labeled
• Rated for use on 20-Ampere isolated ground (IG) and
general purpose (GP) power circuits with 20-Ampere, UL
listed, NEMA receptacles
(D)
® 2013 FastLane is a registered trademark of Boston Group, Inc. v10.1
U.S. Headquarters • Medford, MA
Tel. 781-395-7417 (main) or 800-225-1633 (toll-free)
Fax 781-391-5766 • sales.usa@boston-group.com
www.boston-group.com
European Headquarters (EMEA) • Rotterdam, NL
Tel. +31 (0)10 238 1400 • sales.emea@boston-group.com
© Boston Group 2013