AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
PURCHASE ENQUIRY
Inquiry No
: AFD/PUR/PKS/ENQ/Conv/1, Dated: Sep 6, 2016
Description
: Purchase Inquiry for Supply, installation and commissioning of Crate conveyors at
Pouch Section.
Qty
: As per Annexure-I.
Due Date
: 20th Sep, 2016
Dear Sir,
You are requested to give your most competitive rates for Supply of installation and commissioning of Crate
conveyors at Pouch Section at AmulFed Dairy at Gandhinagar with all neccessary accessories required, as per
the annexure attached herewith:
The offer should reach, AmulFed Dairy (A Unit Of Gujarat Co - Operative Milk Marketing Federation
Limited.) Plot No. - 35, Near Indira Bridge, Ahmedabad - Gandhinagar Highway, Village: Bhat, Dist.:
Gandhinagar. Pin No.382 428.















The offer should be sent in sealed cover super scribing on the top left hand corner offer for
inquiry no. AFD/PUR/PKS/Conv/1 dtd. 6/09/2016. Offer received after due date for
whatsoever reason may be rejected.
Your offer should be sent through Post/Courier/mail & not by Fax or personally.
Offer should be valid for acceptance, for 60 days from due date of submission of offer.
The price should be quoted on F.O.R basis inclusive of packing and forwarding, taxes, excise
duties, freight etc. However if it is separate, it should be clearly mentioned in the quotation as per
the attached annexure.
It should cover a warranty of at least one-year against manufacturing defect from commissioning
of the plant.
Realistic earliest delivery period should be indicated.
It is not binding on us to accept lowest offer.
Right to reject any or all the offers without assigning any reason is reserved by us.
Offer which are incomplete or not meeting the conditions or only for part items, are liable for
rejections.
No queries regarding the status of the offer will be entertained at any time.
The final supplier will be the combined decision of our technical team and management and no
reason of final selection will be conveyed to any bidder.
Payment terms with 30 days credit shall be preferred.
We are an ISO 14001 certified unit. We follow Eco- friendly processes in our factory & also expect
same to be followed in your company.
Contact detail: Mr. Palak Shah, Mail: palak.shah@amul.coop, Mob: 7359001666
All Suppliers can visit site for better understanding of requirement with prior
Permission.
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com
AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
Annexure-I
Conveyor system for crate transfer from empty crate dock to pouch terrace
1) Inclined Conveyor-Approx. 25 Mtr
2) Strait Conveyor-Approx. 20 Mtr
3) Slope Conveyor after crate washer-Approx. 15 Mtr
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com
AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
Technical Specification
INCLINED CONVEYOR - @25METER
CONVEYOR DESCRIPTION
SR. NO.
1 Drive Side of Conveyor
1.1 shaft Diameter
35mm
1.2 Length
720mm
1.3 Material
1.4 Bearing
1.5 Sprocket ID
SS-304
35MM-SKF
45.5mm
1.6 teeth
1.7 Material
1.8 Pitch
12nos.
MS with Hardening
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
Driven Side of Conveyor
shaft Diameter
25mm
Length
380mm
Material
SS-304
Bearing
35MM-SKF
Sprocket ID
35.5mm
teeth
10nos.
Material
nylon
Pitch
sleeve
ID-24.5MM,OD-34.5MM,L-50MM
2.10 Material
2.11 COLLAR
UHMW
SS-304,FOR SPROCKET FITTING
3
3.1
3.2
3.3
FLAT BAR FOR CONVEYOR
DIMENSION
50MM*8MM
MATERIAL
SS-304
FITTING
WITH 8MM BOLT ON LEG
4
4.1
4.2
4.3
ANGLE FOR CHAIN IN CONVEYOR
DIMENSION
25MM*25MM*4MM
MATERIAL
SS-304
FITTING
ARGON WELDING ON LEG
5 LEG IN CONVEYOR
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com
AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
5.1
5.2
5.3
5.4
5.5
PIPE
FLAT BAR
SUPPORT FOR LEG
LEG REQUIRED
MATERIAL
40MM*40MM*2MM
50MM*8MM - 150MM
30MM*5MM FLAT BAR
1 METER DISTANCE
SS-304
6 FLAT GUIDE STRIP
6.1 LOCATION
BELOW DURLAIN CHAIN IN
CONVEYOR
6.2 MATERIAL
6.3 DIMENTION
UHMW-WHITE COLOR
50MM*4MM
7 GUIDER
7.1 SS CHANNEL
58MM*62MM*2MM - HEIGHT-50MM
7.2 GUIDE STRIP
7.3 LENGTH
50MM*4MM-200MM/GUIDER
150MM
8 GEAR BOX MOUNTING STRUCTURE
8.1 SQUARE PIPE
40MM*40MM*2MM
50MM*8MM, L-300MM WITH CAPSULE
8.2 FLAT BAR
HOLE
9 TURNER
9.1 where it required
with chain or without chain
10 Cover For GEARED MOTOR
10.1 MATERIAL
SS-304
10.2 THICKESS
2MM
11 Electrical Panel & Control
11.1 Dimension
400MM*400MM*220MM
11.2 HINGES
11.3 LOCK
FOR DOOR OPEN-CLOSE
FOR DOOR LOCKING
MOTOR PROTECTION WITH MPCB & CONTACTOR AND
11.4 CKT
REQUIRED INTERLOCKING
WITH VFD CONTROL OF GEARED
11.5 REMOTE
MOTOR
12 CHAIN FOR CONVEYOR
12.1 MATERIAL
12.2 SIZE
DURLAIN
25MM THICKNESS
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com
AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
12.3 WORKING
12.4 CERTIFICATE
WITH STOPPER AT FIXED DISTANCE
MATERIAL TESTING CERT.
13 GEARED MOTOR
13.1 MAKE
13.2 TYPE
SEW
HOLLOW SHAFT
13.3 MOUNTING
VERTICAL
14 CABLE CONDUIT PIPE
14.1 DIAMETER
38MM
14.2 THICKNES
1.2MM
15
15.1
15.2
15.3
TRAY BELOW CONVEYOR
WIDTH
500MM
THICKNESS
1MM
MATERIAL
SS-304
16 SPEED OF CONVEYOR
16.1 CRATES/HOUR
1200
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com
AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
SR. NO.
STRAIGHT CONVEYOR - @20METER
CONVEYOR DESCRIPTION
1 Drive Side of Conveyor
1.1 shaft Diameter
35mm
1.2 Length
720mm
1.3 Material
1.4 Bearing
1.5 Sprocket ID
SS-304
35MM-SKF
45.5mm
1.6 teeth
1.7 Material
1.8 Pitch
12nos.
MS with Hardening
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
Driven Side of Conveyor
shaft Diameter
25mm
Length
380mm
Material
SS-304
Bearing
35MM-SKF
Sprocket ID
35.5mm
teeth
10nos.
Material
nylon
Pitch
sleeve
ID-24.5MM,OD-34.5MM,L-50MM
2.10 Material
2.11 COLLAR
UHMW
SS-304,FOR SPROCKET FITTING
3
3.1
3.2
3.3
FLAT BAR FOR CONVEYOR
DIMENSION
50MM*8MM
MATERIAL
SS-304
FITTING
WITH 8MM BOLT ON LEG
4
4.1
4.2
4.3
ANGLE FOR CHAIN IN CONVEYOR
DIMENSION
25MM*25MM*4MM
MATERIAL
SS-304
FITTING
ARGON WELDING ON LEG
5 LEG IN CONVEYOR
5.1 PIPE
40MM*40MM*2MM
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com
AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
5.2 FLAT BAR
SUPPORT FOR
5.3 LEG
5.4 LEG REQUIRED
5.5 MATERIAL
50MM*8MM - 150MM
5.6 HEIGHT
5.7 BALL FEET
1000MM
150MM-D-40MM
30MM*5MM FLAT BAR
1 METER DISTANCE
SS-304
6 FLAT GUIDE STRIP
6.1 LOCATION
BELOW DURLAIN CHAIN IN CONVEYOR
6.2 MATERIAL
6.3 DIMENTION
UHMW-WHITE COLOR
50MM*4MM
7 GUIDER
7.1 SS CHANNEL
58MM*62MM*2MM - HEIGHT-50MM
7.2 GUIDE STRIP
7.3 LENGTH
50MM*4MM-200MM/GUIDER
150MM
8 GEAR BOX MOUNTING STRUCTURE
8.1 SQUARE PIPE
8.2 FLAT BAR
40MM*40MM*2MM
50MM*8MM, L-300MM WITH CAPSULE
HOLE
9 TURNER
9.1 where it required
with chain or without chain
10 Cover For GEARED MOTOR
10.1 MATERIAL
10.2 THICKESS
SS-304
2MM
12 CHAIN FOR CONVEYOR
12.1 MATERIAL
DURLAIN
12.2 SIZE
12.3 WORKING
25MM THICKNESS
NORMAL MOVING OF CRATES
12.4 CERTIFICATE
MATERIAL TESTING CERT.
13 GEARED MOTOR
13.1 MAKE
SEW
13.2 TYPE
HOLLOW SHAFT
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com
AMULFED DAIRY
A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED
13.3 MOUNTING
VERTICAL
14 CABLE CONDUIT PIPE
14.1 DIAMETER
38MM
14.2 THICKNES
1.2MM
15 SPEED OF CONVEYOR
15.1 CRATES/HOUR
1200
SLOPE CONVEYOR AFTER CRATE WASHER- @15METER
SR. NO.
CONVEYOR DESCRIPTION
1 GUIDE ROD
1.1 DIAMETER
1.2 NOS OF GUIDE ROD
12MM
6
2 RECTANGLE FOR GUIDE ROD FITTING
2.1 FLAT BAR
30MM*5MM
2.2 SIZE OF RECTANGLE
540MM*400MM
3 FOR HANGING THE STRUCTURE
3.1 SQUARE PIPE
40MM*40MM*2MM
3.2 SQUARE PLATE
100MM
3.3 THICKNESS OF PLATE
5MM
NOTE
1) ALL SS MATERIALS SHOULD BE BUFFED.
2) BOLT REQURED FOR FLAT BAR FITTING. IT SHOULD IN MM SIZE (8MM)
3) CONVEYOR STRUCTURE ASSEMBLY FITTING AT AFD ON TURN KEY BASIS
IN SUPPLIER SCOPE
4) ALL WELDING JOINT SHOULD BY ARGON WELDING
5) Test Certificate of All SS material & Non metallic Material
6) Supplier Should Quote Their rates on Per Meter Basis in All Three Types Of
Conveyor
Plot No. 35, Nr. India Bridge, Ahmedabad – Gandhinagar Highway, Village: Bhat, Dist.: Gandhinagar, PIN 382 428
Tel. No.: (079) 23969055 – 58, Fax No.: (079) 23969059
Website: www.amul.com