Sensor technologies ► Distance measuring sensors Series SM6 Brochure 2 Sensor technologies ► Distance measuring sensors Series SM6 Sensors, Series SM6 ► 6 mm groove ► with cable ► without wire end ferrule, tin-plated, 4-pin ► with distance measuring sensor, measurement range 32 - 256 mm 3 Sensors, Series SM6 ► 6 mm groove ► with cable ► Plug, M8x1, 4-pin, with knurled screw ► with distance measuring sensor, measurement range 32 - 256 mm 5 Sensor mounting, Series CB1 ► for Series ST6, SM6 ► to mount on cylinder MNI, ICM 7 Sensor mounting, Series CB1 ► for Series ST6, SN2, SN6, SN1, SM6, SM6-AL ► to mount on cylinder ITS 8 Sensor mounting, Series CB1 ► for Series ST6, SM6, SN1, SN2 ► to mount on cylinder TRB, CVI, 523 8 Sensor mounting, Series CB1 ► for Series ST6, SM6 ► to mount on cylinder TRB, TRR, CVI, 523, 167 9 Sensor mounting, Series CB1 ► for Series ST6, SM6 ► to mount on cylinder Series 167 10 Connecting cable, Series CN2 ► Socket, M8x1, 4-pin, straight ► open cable ends, 4-pin 10 Connecting cable, Series CN2 ► Socket, M8x1, 4-pin, angled ► open cable ends, 4-pin 11 Accessories Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change 3 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 ► 6 mm groove ► with cable ► without wire end ferrule, tin-plated, 4-pin ► with distance measuring sensor, measurement range 32 - 256 mm 00133722 Ambient temperature min./max. -4°F / +158°F Protection class IP67 Output signal 0 - 10 V DC, 4 - 20 mA Quiescent current (without load) < 25 mA Current signal 4 - 20 mA Maximum load (analog current output) 500 Ω DC operating voltage min./max. 15 V - 30 V Residual ripple ≤ 10 % sampling interval 1 ms Resolution max. measuring range 0,05 mm Repetitive precision max. measuring range 0.1 mm Linearity deviation 0,3 mm Sampling speed 3 m/s Display LED LED status display Yellow Vibration resistance 10 - 55 Hz, 1 mm Shock resistance 30 g / 11 ms Materials: Type of contact G U I 1 BN 4 BK 2 WH 3 BU RL RL Housing Polyamide, fiber-glass reinforced Cable sheath Polyurethane Cable length Measurement range Max. [ft.] [inch] Overall length Sensor A [inch] 1.77 R412010141 2.51 3.03 R412010143 3.77 4.29 R412010262 5.03 5.55 R412010264 6.29 6.81 R412010411 7.55 8.07 R412010413 8.81 9.33 R412010415 10.07 10.59 R412010417 + Analog 6.56 – 1.25 interfaces: without wire end ferrule, tin-plated; 4-pin short circuit resistant / Protected against polarity reversal / Overload protection All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change Part No. 4 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 ► 6 mm groove ► with cable ► without wire end ferrule, tin-plated, 4-pin ► with distance measuring sensor, measurement range 32 - 256 mm Dimensions 1* 2* 3* L A BN WH BK BU 63 24,2 5,8 13,6 14,2 37,1 5,8 13,6 00133787 1* = LED 2* = teach button 3* = threaded pin M3x11 L = cable length (1) BN=brown (2) WH=white (3) BU=blue (4) BK=black A = sensor length All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change 5 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 ► 6 mm groove ► with cable ► Plug, M8x1, 4-pin, with knurled screw ► with distance measuring sensor, measurement range 32 - 256 mm 00134312 Ambient temperature min./max. -4°F / +158°F Protection class IP67 Output signal 0 - 10 V DC, 4 - 20 mA Quiescent current (without load) < 25 mA Current signal 4 - 20 mA DC operating voltage min./max. 15 V - 30 V sampling interval 1 ms Resolution max. measuring range 0,05 mm Repetitive precision max. measuring range 0.1 mm Linearity deviation 0,3 mm Sampling speed 3 m/s Display LED LED status display Yellow Vibration resistance 10 - 55 Hz, 1 mm Shock resistance 30 g / 11 ms Materials: Type of contact G U I 1 BN 4 BK 2 WH 3 BU RL RL Housing Polyamide, fiber-glass reinforced Cable sheath Polyurethane Cable length Measurement range Max. [ft.] [inch] Overall length Sensor A [inch] 1.77 R412010142 2.51 3.03 R412010144 3.77 4.29 R412010263 5.03 5.55 R412010265 6.29 6.81 R412010410 7.55 8.07 R412010412 8.81 9.33 R412010414 10.07 10.59 R412010416 + Analog 0.98 – 1.25 interfaces: Plug; M8x1; 4-pin; with knurled screw short circuit resistant / Protected against polarity reversal / Overload protection All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change Part No. 6 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 ► 6 mm groove ► with cable ► Plug, M8x1, 4-pin, with knurled screw ► with distance measuring sensor, measurement range 32 - 256 mm Dimensions 2* 3* A M8x1 1* L 2 1 4 3 40 24,2 37,1 14,2 5,8 13,6 Ø8,1 5,8 13,6 00133788 1* = LED 2* = teach button 3* = threaded pin M3x11 L = cable length Pin assignment: 1 = (+), 2 = (OUT 1) 3 = (GND), 4 = (OUT 2), EN 60947-5-7 A = sensor length All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change 7 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 Accessories Sensor mounting, Series CB1 ► for Series ST6, SM6 ► to mount on cylinder MNI, ICM 2 2,5 D C E F E 1 F 00110587 3 MA1 A D C 3 B 4 G 00111947 1) Mounting screw 2) Mounting screw for sensor 3) Sensor 4) Cylinder pipe Part No. Cylinders Ø [mm] For series A B C D E 1827020296 10 ST6, SM6 20 8 1827020297 12 ST6, SM6 20 8 1827020298 16 ST6, SM6 20 12 34 F G 1) 24 19 17.5 26 22 19 11.8 3 M3x8 11.8 3 30 23 13.8 M3x8 4 M4x10 1827020299 20 ST6, SM6 20 12 38 32 26 13.8 4 M4x10 1827020300 25 ST6, SM6 20 12 43 37 31 13.8 4 M4x10 Part No. MA1 [Nm] Material Weight [lbs] 1827020296 1 +0,2 Aluminum 1827020297 1 +0,2 Aluminum 0.022 1827020298 2 +0,3 Aluminum 0.0308 1827020299 2 +0,3 Aluminum 0.0308 1827020300 2 +0,3 Aluminum 0.033 0.0198 All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change 8 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 Accessories Sensor mounting, Series CB1 ► for Series ST6, SN2, SN6, SN1, SM6, SM6-AL ► to mount on cylinder ITS E B D C 3) 2) A 2) 4) 21464 1) 2,5 3 MA1 21268 1) Clamping threaded pin 2) Mounting screws for sensor 3) Tie rod 4) Cylinder profile Part No. Cylinders Ø [mm] For series A B C D E R412017979 160 - 200 ST6, SN2, SN6, SN1, SM6, SM6-AL 16 51 36 6.8 36 R412017980 250 - 320 ST6, SN2, SN6, SN1, SM6, SM6-AL 24 56 44.5 6.8 36 Part No. Weight [lbs] R412017979 0.1278 R412017980 0.1609 MA1 [Nm] Material 2 Aluminum 2 Aluminum Scope of delivery: Incl. mounting screws Sensor mounting, Series CB1 ► for Series ST6, SM6, SN1, SN2 ► to mount on cylinder TRB, CVI, 523 1) E 5) MA1 C A 4) B 00105957 4 3) 2) 2) D 3 00105014 1) Clamping threaded pin 2) Mounting screw for sensor 3) Sensor 4) Cylinder profile 5) Tie rod All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change 9 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 Accessories Part No. 1827020292 Cylinders Ø [mm] 125 - 125 For series ØA B C D E 1) MA1 [Nm] ST6, SM6, SN1, SN2 12 45 29 6.5 21 M5x10 2 Part No. Material 1827020292 Aluminum Weight [lbs] 0.0683 Sensor mounting, Series CB1 ► for Series ST6, SM6 ► to mount on cylinder TRB, TRR, CVI, 523, 167 G F 5) 3) B A D 4) E 103627 1) 2,5 C MA1 2) 00105013 1) Clamping threaded pin 2) Mounting screw for sensor 3) Sensor 4) Cylinder profile 5) Tie rod Part No. Cylinders Ø [mm] For series A B 1827020282 32 - 40 ST6, SM6 26 10 7 14 5 8 40 M5x8 1827020283 50 - 63 ST6, SM6 32.5 15.5 7 14 5 8 40 M5x10 1827020284 80 - 100 ST6, SM6 43 17 6.9 14 5 8 40 M5x16 Part No. MA1 [Nm] Material 1827020282 2 ±0,2 Aluminum 1827020283 2 ±0,2 Aluminum 0.0639 1827020284 2 ±0,2 Aluminum 0.0925 C D E F Weight [lbs] 0.0352 All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change G 1) 10 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 Accessories Sensor mounting, Series CB1 ► for Series ST6, SM6 ► to mount on cylinder Series 167 25 1) 2,5 MA1 16,8 3 12,5 7,3 23683 24,7 23444 1) Mounting screw Part No. Cylinders Ø [mm] For series MA1 [Nm] Material Weight [lbs] R412022357 25 ST6, SM6 1 + 0,3 Aluminum 0.022 Delivery quantity [Piece] 1 Connecting cable, Series CN2 ► Socket, M8x1, 4-pin, straight ► open cable ends, 4-pin Ambient temperature min./max. -40°F / +185°F Protection class IP65 Wire cross-section 0 in² Materials: Cable sheath Polyurethane 00107009_b Technical Remarks ■ The specified protection class is only valid in assembled and tested state. Operational voltage Number of wires [V DC] 1 2 3 4 BN WH BU BK 24 Cable-Ø [inch] 4 0.18 Cable length L Part No. [ft.] 9.84 1834484144 16.4 1834484146 All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change 11 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 Accessories 4x0,25 mm2 Dimensions M8x1 9,7 4,5 32 3+2 40 L 00127634_1 L = length Pin assignment 4 2 3 1 Buchse_4-polig (1) BN=brown (2) WH=white (3) BU=blue (4) BK=black Connecting cable, Series CN2 ► Socket, M8x1, 4-pin, angled ► open cable ends, 4-pin Ambient temperature min./max. -40°F / +185°F Protection class IP65 Wire cross-section 0 in² Materials: Cable sheath Polyurethane 00107009_c Technical Remarks ■ The specified protection class is only valid in assembled and tested state. All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change 12 Sensor technologies ► Distance measuring sensors Sensors, Series SM6 Accessories Operational voltage Number of wires Cable-Ø [V DC] 1 2 3 4 BN WH BU BK Cable length L [inch] 24 4 Part No. [ft.] 0.18 9.84 1834484145 16.4 1834484147 Dimensions 10 18,2 4,5 M8x1 4x0,25 mm2 9,7 20 3+2 26 40 8 L 00127634_2 L = length Pin assignment 4 3 2 1 Buchse_4-polig (1) BN=brown (2) WH=white (3) BU=blue (4) BK=black All dimensions in mm, unless specified otherwise. Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2016-01-16, ©AVENTICS S.à r.l., subject to change AVENTICS Corporation 1953 Mercer Road Lexington, KY 40511 Phone 859.254.8031 Fax 800.489.1488 www.aventics.com/us info.us@aventics.com AVENTICS Incorporated 5515 North Service Rd Suite #104 Burlington ON L7L 6G4 Phone 905.332.0399 Fax 905.332.8596 www.aventics.com/ca info.ca@aventics.com Find more contact information at www.aventics.com/contact Only use the AVENTICS products shown in industrial applications. Read the product documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When integrating the product into applications, note the system manufacturer’s specifications for safe use of the product. The data specified only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that the products are subject to a natural process of wear and aging. 16-01-2016 An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. © AVENTICS Corporation This document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS. It may not be reproduced or given to third parties without its consent. PDF online