KME Germany GmbH & Co. KG
Copper and Copper Alloy Products
[GB]
Industrial Rolled
Copper and Copper Alloy Products
KME Germany GmbH & Co. KG
KME and copper
Our modern world would be impossible without copper: electricity,
air conditioning, refrigeration, traffic and digital media technology
have become part of our daily lives and owe much of their widespread
success to the consistent use of the raw material copper. Copper has
become indispensable in technological development, and its importance
as a state-of-the-art raw material is unchallenged.
KME Germany GmbH & Co. KG with its production sites in Osnabrück
and Menden manufactures Standard Products for the building and rolled
industry and also in Osnabrück Special Products for industrial applications.
The precise definition of mechanical properties such as high electrical conductivity
or narrow production tolerances are essential for industrial use.
2
2
4
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
Rolled Products
for industrial applications
At KME, copper and copper-alloy rolled material is tailor-made in quantity
to customer specifications. In addition to strips, sheets, plates and blanks
for industrial use, KME Germany GmbH & Co. KG in Osnabrück also
manufactures special strips needed for the production of cables and
transformers. Many industrial sectors use KME's rolled products, which
include the electric and electronics industries, the automotive and
semiconductor industry, the mechanical engineering industry and
for metal working.
KME rolled products comply fully with the main international standards
(EN, DIN, ASTM, BS, AFNOR etc.)
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
3
Copper Strips
KME is one of the leading manufacturers of copper and copper-alloy
strips. Copper strips are produced to EN 1652 and EN 13599, to tighter
tolerances than those stated in the EN standards. KME offers various
alloys / types of copper, all with a minimum 99.9% purity.
4
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products





Surfaces
bare
hot-dip tinned
galvanic tin-plated (with/without reflow)
special KME tin coatings with specific properties
profiled strips
(thicknesses: 0.18 - 1.00 mm; widths: 15 - 90 mm)
Other surface finishes on request.
Delivery Forms
 single coils
 coils, layer / traverse wound, plastic
or iron drums
Coil weight 300 - 1500 kg
 TECSTRIP®_multicoil
(thicknesses: 0.15 - 0.80 mm; widths: 15 - 50 mm)
Dimensions Coils
Width
mm
Thickness
mm
Inner diamter of the coil
mm
Max.
coil weight
10–400
0.10–2.00
150/300/400
12 kg/mm
15–700
0.20–1.60
300/400/500/600
12 kg/mm
400/600
12 kg/mm
50–1,220 0.40–4.00
3.00–4.00
400/600
12 kg/mm
700–1,220 0.20–2.00
100–680
500/600
12 kg/mm
Other dimensions, coil weights and inner diameter of coil upon request.
Materials
DIN EN
CEN
ASTM
JIS
CW004A
C11000
C1100
Cu-HCP (SE-Cu)
CW021A
C10300
–
Cu-DHP(SF-Cu)
CW024A
C12200
C1220
Cu-OFE (OF-Cu)
CW009A
C10100
C1010
Cu-ETP (E-Cu)
Possible coil weights: 3 to 12 kg/mm range.
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
5








Surfaces
bare
hot-dip-tinned
galvanic tin-plated (with/without reflow)
silver plated
nickel plated
selectively plated
profiled
PVC - coated
Delivery Forms
 Strips
Dimensions
Minimum
Width
8 mm
Thickness
0.10 mm
Maximum
1010 mm
5.00 mm
 Plates
Dimensions
Minimum
Maximum
Thickness
0,20 mm
175 mm
Width
500 mm
1000 mm
Length
500 mm
4000 mm
Standard
1000 x 2000 mm
Further dimensions / sizes on request.
 Discs
Dimensions
Minimum
Diameter
50 mm
Thickness
0.30 mm
Below Ø 100 mm on request.
Coil Design
Strips
Weight (kg/mm width):
approx. 1.5/3/6/12 kg/mm strip width
approx. 2.5/5/10 kg/mm strip width
Inner diameter of coil:
100, 300, 400, 500 mm
Other coil dimensions on request.
Traverse wound strips:
Drum weights: 500 - 1500 kg
Wooden, plastic and metal drums
Width: 8 - 50 mm
Thickness: 0.2 - 1.5 mm
Maximum
1030 mm
3.00 mm
 Strips / Plates / Discs:
Some combinations of thickness, width and
diameter are not feasible. Please consult us
for more details.
Materials
DIN EN
CuZn5
CEN
ASTM
JIS
CW500L
C21000
C2100
CuZn10
CW501L
C22000
C2200
CuZn15
CW502L
C23000
C2300
CuZn20
CW503L
C24000
C2400
CuZn30
CW505L
C26000
C2600
CuZn33
CW506L
C26800
C2680
CuZn36
CW507L
C27200
-
CuZn37
CW508L
C27400
C2740
Other brass products on request.
6
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
Brass Rolled Products
Brass is probably the most well-known of all copper alloys. Varying the composition
of copper and zinc creates different types of material which are specifically geared
to meeting particular demands. At KME, brass products are made in a wide variety
of alloys, manufactured to EN 1652 and EN 1654, to tighter tolerances than those
stated in the EN standards.
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
7
Bronze Strips
KME produces high-quality alloyed bronze strips according to EN 1652
and EN 1654 and with much narrower tolerances those specified in the
EN standard.
8
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products





Surfaces
bare
hot-dip-tinned
galvanic tin-plated (with/without reflow)
special KME tin coatings with specific properties
profiled strips
(thicknesses: 0.18 - 1.00 mm; widths: 15 - 90 mm)
Other surface finishes on request.
Delivery Forms
 single coils
 coils, layer / traverse wound, plastic
or iron drums
 Coil weight 300 - 1500 kg
TECSTRIP®_multicoil
(thicknesses: 0.15 - 0.80 mm; widths: 15 - 50 mm)
Materials
DIN EN
CEN
ASTM
JIS
CuSn4
CW450K
C51100
C5111
CuSn5
CW451K
C51000
C5102
CuSn6
CW452K
C51900
C5191
CuSn8
CW453K
C52100
C5210
Dimensions Strips
Materials
Thickness
Width
Inner diamter
of the coil
Max.
coil weight
CuSn0,15
0.15 - 3.0 mm
5 - 630 mm
300/400 mm
approx. 10kg /mm
CuSn0.2
0.20 - 2.0 mm
> 2.0 - 4.0 mm
16 - 700 mm
100 - 700 mm
300/400/500/600 mm
400/500/600 mm
approx. 3.5/5.5/11kg/mm
approx. 3.5/5.5/11kg/mm
CuSn4
0.20 - 2.0 mm
> 2.0 - 4.0 mm
16 - 700 mm
100 - 700 mm
300/400/500/600 mm
400/500/600 mm
approx. 4/6/12kg/mm
approx. 4/6/12kg/mm
CuSn5
0.20 - 2.0 mm
> 2.0 - 4.0 mm
16 - 700 mm
100 - 700 mm
300/400/500/600 mm
400/500/600 mm
approx. 4/6/12kg/mm
approx. 4/6/12kg/mm
CuSn5
0.20 - 2.0 mm
> 2.0 - 4.0 mm
16 - 700 mm
100 - 700 mm
300/400/500/600 mm
400/500/600 mm
approx. 4/6/12kg/mm
approx. 4/6/12kg/mm
0.20 - 2.0 mm
> 2.0 - 4.0 mm
16 - 700 mm
100 - 700 mm
300/400/500/600 mm
400/500/600 mm
approx. 4/6/12kg/mm
approx. 4/6/12kg/mm
CuSn8
Other dimensions, coil weights and inner coil diameters on request.
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
9
Cable Strips
KME is the leading manufacturer of copper and copper-alloy precision cable
strips which are used throughout the world in the production of cables for
telecommunications, high - frequency engineering and energy transfer.
mm
Max. 1)
coil weight
1/1 Coil
1/1 Coil
1/2 Coil
1/3 Coil
Standard
inner dia. of the coil
mm
0.10 – 1.50
10 – 670
12
approx. 12
approx. 6
approx. 4
300, 400
Cu-DHP (SF-Cu)
0.10 – 1.50
10 – 670
12
approx. 12
approx. 6
approx. 4
300, 400
Cu-ETP (E-Cu)
0.10 – 1.50
10 – 670
12
approx. 12
approx. 6
approx. 4
300, 400
Cu-OF (OF-Cu)
0.10 – 1.50
10 – 670
12
approx. 12
approx. 6
approx. 4
300, 400
CuSn0,15
0.15 – 3.00
5 – 630
10
approx. 10
approx. 5
approx. 3.3
300, 400
0.2 – 2.00
16 – 700
11
approx. 11
approx. 5.5
approx. 3.5
300, 400
0.15 – 3.00
5 – 630
10
approx. 10
approx. 5
approx. 3.3
300, 400
Material
Thickness
Width
mm
Cu-HCP (SE-Cu)
CuSn0,2
CuSn4, 5, 6, 8
Standard coil weights1)
1)
In kg per range; not for all combinations of thickness and width.
Deviations in inner diameter of coil may be agreed upon.
10
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
Cable Strips
Extremely high-quality copper strips for any type of communications
(coaxial, HF submarine cable), heavy-duty and special cable.
Cable strips with specific demands on the welding parameters
stand out for the following features:
•No periodic fluctuations in thickness
•Technically fat-free, smooth surface
•High dimensional stability
•High electrical conductivity
•Concentrated materials composition
Copper strips with no specific demands on welding parameters
stand out for the following features:
•High electrical conductivity
•Low-fat, smooth surface
•Narrow size tolerances
Delivery Forms
In addition, KME supplies special strips such as one- or two-sided
copolymer coated strips and/or tailor-made perforated strips
which are used in radiating cables, etc.
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
11
Transformer Strips
KME produces soft copper strips with clean, smooth surfaces and
deburred edges for transformer windings. Their characteristic feature
is the carefully deburred edges, making them ideal for constructing
electric windings with large conductor cross-sections. They are mainly
used to equip distribution transformers and special transformers for
welding engineering, making rectifiers and electrotechnical appliances.
14
12
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
Copper strips for manufacture
of transformer windings
Cu-ETP (E-Cu58) CW004A
Cu ≥ 99.97 %
Tolerances
according to EN 13599
Coil design/Packaging
Inner diameter
400 mm for widths up to 700 mm
500/600 mm for widths above 700 mm
with or without paper interleaving
(we recommend the use of paper interleaving)
Scope of supply
0.20 – 2.00 mm thickness, ≤ 700 mm width
0.40 – 2.50 mm thickness, > 700 – 1.200 mm width
Standard dimensions
0.50 – 1.20 mm thick x 500 – 700 mm wide
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
13
Materials
DIN EN
CEN
Cu-ETP (E-Cu58)
CW004A
Cu-DHP (SF-Cu)
CW024A
Cu-HCP (SE-Cu)
CW021A
Cu-OF (OF-Cu)
CW008A
CuNi
Other materials on request.
Standard formats (e.g. 1,000 x 2,000 mm)
in the materials
– Cu-ETP (E-Cu)
– Cu-DHP (SF-Cu)
can be supplied immediately ex stock
(subject to availability).
Dimensions Sheets
Thickness
mm
0.4≤3.0
Width
mm
Length
mm
500–1,250
500≤600
> 3.0≤6.0
< 1,800
≤ 3,048
> 6.0≤12.0
< 1,800
≤ 6,000
> 12.0≤150.0
on request
Larger sheets and other special dimensions upon request
14
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
Sheets and Plates
KME produces copper and copper-alloy sheets and plates to international standards for stamping, forming, drilling and deep
drawing parts; for tubes, vessels, welding construction, sealing,
plating, capacitors, bus bars, cable connectors, finned tubing,
kitchen appliances, gifts – for any type of metal good.
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
15
Discs
KME produces copper discs and plates to EN 1652 and EN 1653 for
hot-water appliances, household appliances and any type of metal good
with a high-quality surface and the best possible deep-draw properties.
16
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
Discs
Stamped and cut copper discs in low-earing quality for
deep-drawing purposes.
The KME copper discs complying with EN 1652 and EN 1653
are suitable for the production of boilers, electrical household
appliances and all kinds of metal-objects requiring a high-quality
surface and a good deep-drawing quality. The discs can be
made from strips or plates. Discs made from strip are usually
annealed (R220). On request however, the physical state of
semi-hard (R240) or hard (R290) is also available.
Profiled sheets and segments
Individual profiled blanks with stamped, cut or sawn edges
for the construction of containers and apparatus.
Copper discs production from strips
• soft (R 220)
• half-hard (R 240): upon request
• hard (R 290): upon request
Dimensions discs (hand-rolled sheets /heavy sheets)
Thickness
mm
> 2.0–10.0
Diameter
mm
Temper
500–1,200
soft, half-hard, hard
>10.0–30.0
approx 1,900
soft, half-hard, hard
> 30.0–90.0
approx 1,900
soft, hard as rolled
Other dimensions on request.
Dimensions discs (production from strips)
Thickness
mm
Diameter
mm
0.40–2.60
2.61–3.50
3.51–5.00
100–600
100–450
upon request
0.60–2.00
601–1,000
1.01–2.00
1,001–1,200
KME Germany GmbH & Co. KG — Copper and Copper Alloy Products
17
international Standards
KME industrial rolled products are manufactured in compliance
with the main international standards.
Below is a list of the standards to which all our industrial rolled products refer.
DIN EN 10002-1
Metallic materials. Tensile testing
DIN EN ISO 9001
Quality management systems - requirements
DIN EN 10204
Metallic products - types of inspection documents
DIN EN 1172
BS EN 1172
Strips and sheets for the building industry
DIN EN 1652
BS EN 1652
NF EN 1652
Plates, sheets, strips and discs for general purposes
DIN EN 1653
BS EN 1653
NF EN 1653
Plates, sheets and discs for boilers, pressure vessels and hot water storage systems
DIN EN 1654
BS EN 1654
Strips for springs and connectors
DIN EN 13599
BS EN 13599
NF EN 13599
Copper plates, sheets and strips for use in electrical engineering
ASTM-F68
Oxygen-free copper in wrought forms for electron devices
ASTM-B-152
ASME-SB-152
Copper sheet, strip, plate and rolled bar
ASTM-B-171
ASME-SB-171
Copper-Alloy plate and sheet for pressure vessels, condensers and heat exchangers
ASTM-B-370
Copper sheet and strip for building constructtion
IIS H 3100
Copper and copper alloys sheets, plates and strips
JIS H 3110
Phosphor bronze and nickel silver sheets, plates and strips
JIS H 3130
Copper beryllium alloy, copper titanium alloy, phosphor bronze, copper-nickel-tin alloy and
nickel silver sheets, plates and strips for springs
18
alloys
Material
Copper
DIN EN
CEN
ASTM
JIS
Tensile strength
Rmin .. Rmax
BS
Electric conductivity
MS/m
IACS (%)
Cu–ETP
Cu–ETP
CW004A
C11000
C1100
R200 .. R360
–
≥58
≥100
Cu-HCP
Cu-HCP
CW021A
C10300
–
R200 .. R360
–
≥57
≥98.3
Cu-PHC
(SE-Cu)
Cu-PHC
(SE-Cu)
CW020A
C10300
(OFXLP-Cu)
–
R200 .. R360
–
≥58
≥100
Cu-DLP
Cu-DLP
CW023A
C12000
–
R200 .. R360
–
≥52.2
≥90
Cu-DHP
Cu-DHP
CW024A
C12200
C1220
R200 .. R360
–
≥47
≥81
Cu-OFE
Cu-OFE
CW009A
C10100
C1010
R200 .. R360
–
≥58.6
≥101
CuZn0.5
CuZn0.5
CW119C
C18661
C1866
R220 .. R360
–
≥46
≥79
CuAg0.1P
CuAg0.1P
CW016A
C10700
C1070
R200 .. R360
–
≥57
≥98.2
DLPS-Cu
DLPS-Cu
–
–
C1010
R200 .. R360
–
≥52
≥90
Material
Brass
CuZn5
CuZn5
CW500L
C21000
C2100
R230 .. R340
CZ125
≥33
≥56.9
CuZn10
CuZn10
CW501L
C22000
C2200
R240 .. R350
CZ101
≥25
≥43
CuZn15
CuZn15
CW502L
C23000
C2300
R260 .. R550
CZ102
≥20
≥34
CuZn20
CuZn20
CW503L
C24000
C2400
R270 .. R480
CZ103
≥19
≥32.8
CuZn28
CuZn28
–
–
–
R270 .. R630
–
≥16
≥27.6
CuZn30
CuZn30
CW505L
C26000
C2600
R270 .. R630
CZ106
≥16
≥28
CuZn33
CuZn33
CW506L
C26800
C2680
R280 .. R500
–
≥15
≥26
CuZn36
CuZn36
CW507L
C27000
C2700
R300 .. R630
CZ108
≥14
≥24
CuZn37
CuZn37
CW508L
C27200
C2720
R300 .. R630
CZ107
≥14
≥24
CuZn39Pb2
CuZn39Pb2
CW612W
–
C3771
R360 .. R560
CZ120
≥14
≥24
CuZn40
CuZn40
CW617N
C28000
–
R340 .. R470
CZ122
≥15
≥25.9
Material
Bronze
CuSn4
CuSn4
CW450K
C51100
C5111
R290 .. R700
PB 101
≥11
≥19
CuSn5
CuSn5
CW451K
C51000
C5102
R310 .. R690
PB 102
≥10
≥17
CuSn6
CuSn6
CW452K
C51900
C5191
R350 .. R850
PB 103
≥9
≥16
CuSn8
CuSn8
CW453K
C52100
C5210
R370 .. R850
PB 104
≥7.5
≥13
19
23
Material
Nickel
DIN EN
CEN
ASTM
UNS
JIS
Tensile strength
Rmin .. Rmax
Electric conductivity
MS/m
IACS (%)
CuNi10Fe1.6Mn
–
CW352H
C70600
–
C7060
R300 .. R620
–
–
CuNi25
–
CW350H
C71300
–
–
-
–
–
CuNi30Mn1Fe
–
CW354H
C71500
–
C7150
R300 .. R620
–
–
Cu75Zn20Ni5
–
–
–
–
–
-
CuNi18Zn20
–
CW409J
C76400
–
–
R500 .. R640
–
–
Material
C opper and Aluminium
CuAl10Ni5Fe4
–
CW307 G
C63000
–
C6301
–
–
–
CuAl5Zn5Sn1
–
–
–
–
–
–
–
–
CuAl6Ni2
–
–
–
–
–
–
–
–
Material
STOL®76
High Performance Alloys (HPA)
CuNi1Si
–
–
C19010
–
R360 .. R580
≥35
≥60
CuNiSi
CW109C
–
C19002
–
R360 .. R620
≥33
≥57
STOL®77
CuSnAgMg
–
–
C15500
–
R320 .. R480
≥46
≥79
STOL®78
CuMg
–
–
C18665
–
R380 .. R620
≥36
≥62
STOL®79
CuFe2P
–
–
C19400
–
R360 .. R550
≥35
≥60
STOL®80
CuSn
CW177C
–
C14410
–
R250 .. R460
≥44
≥76
STOL®
92
CuNiSi
–
–
C64725
–
R360 .. R650
≥23
≥40
STOL®94
CuNiSi
–
–
C70310
–
R360 .. R800
≥25
≥43
STOL®95
CuCr1Zr
CW106C
–
C18400
–
R480 .. R540
≥48
≥83
STOL®194
CuFe2P
CW107C
–
C19400
–
R300 .. R530
≥35
≥60
CuFe0.1P
CuFe0.1P
–
–
C19210
–
R300 .. R420
≥46
≥80
CuSn2Fe0.1P
CuSn2Fe0.1P –
–
–
–
R400 .. R600
CuSn3Zn9 –
CuSn2Zn10
CuSn3Zn9
CuSn2Zn10
CW454K
–
C42500
–
R320 .. R660
≥16
≥30
CuNi3Si
CuNi3Si
–
–
C70250
–
R620 .. R690
≥25
≥43
CuSn2Zn2Fe
CuSn2Zn2Fe
–
–
C50725
–
R400 .. R600
≥19
≥25
TECSTRIP ®_white
–
–
–
–
–
R480 .. R800
≥1
≥2
STOL
®76M
20
Value adding
Value adding at KME covers all the stages of processing the basic material copper into semi-finished
and finished products. KME supply their products with the great advantage that they are all from
a “one-stop shop”.
© DKI
© DKI
Mine
Recycling
Cathode
Smelting
© DKI
Melting
Casting
Slabs
Billets
Standard Products
Brass Products
Special Products
® = registered
trademark
Use of products herein implies a careful assessment of its intended purpose, as well as environmental and operating conditions where product is to be put in.
Such assessment is to be carried out by skilled technicians at a planning stage. KME assumes no obligation or liability in connection to any use of its products
not in accordance to above recommendations.
KME informs that product pictures herein are intended as examples only. KME shall not be held responsible for any possible inexactness and / or inaccuracy
herein and further reserves the right to alter, modify, or amend herein contents any time.
0116.000.0108
Industrial Rolled
KME Germany GmbH & Co. KG
PO Box 33 20
49023 OSNABRÜCK
Klosterstraße 29
49074 OSNABRÜCK
GERMANY
Fon+49 (0) 541 321-4144
Fax+49 (0) 541 321-84144
info-rolled@kme.com
www.kme.com