Shielded bollards with rotationally symmetrical light distribution Post construction: One piece extruded aluminum, 1⁄4" wall thickness with one piece die-cast aluminum top housing and base, internally welded into an assembly. Die castings are marine grade, copper free (≤ 0.3% copper content) A360.0 aluminum alloy. Lamp enclosure: Heavy wall, one piece die-cast aluminum conical cap trim ring retains a heavy gauge 3⁄16" thick four ring louver /guard stack and a heavy 1/4" thick pressed clear crystal glass refractor. Assembly is fully gasketed using molded high temperature silicone rubber. Stainless steel screws threaded into stainless steel inserts for access to lamp compartment. Type: BEGA Product: Project: Voltage: Color: Options: Modified: Electrical: Fluorescent lampholders are type GX24q-3 (26 W). Ballasts are electronic 120 V or 277 V, specify. Anchor base: Heavy cast aluminum slotted for precise alignment. Mounts to BEGA #895 A anchorage kit,supplied. Finish: All BEGA standard finishes are polyester powder coat with minimum 3 mil thickness. Available in four standard BEGA colors: Black (BLK); White (WHT); Bronze (BRZ); Silver (SLV).To specify, add appropriate suffix to catalog number. Custom colors supplied on special order. UL listed for US and Canadian Standards, suitable for wet locations. Protection class: IP65. A B Lamp 8467P 1 Lumen 26 W CF triple-4p 1800 A B 8 3 ⁄ 4 19 1 ⁄4 Anchorage 895 A BEGA- US 1000 BEGA Way, Carpinteria, CA 93013 ( 805 ) 684-0533 FAX ( 805 ) 566-9474 www. bega-us . com ©copyright BEGA-US 2014 Updated 05/14