LQH3010PE-xxxx-C Series Specification
SMD Sealed Power Inductor
1. Shapes and Dimensions
Unit: mm
Type
A
B
C
D
LQH3010PE
3.0±0.2
3.0±0.2
1.02 (Max.)
1.00 (Typ.)
2. Ordering / Part Number Information
LQH
(1)
3010
(2)
PE
(3)
-
1R0
(4)
N
(5)
- □
(6)
(1) Product Group
(2) Dimension Code
(3) Type Code
(4) Inductance Code：R means decimal point
Ex：1R0  1.0μH
(5) Inductance Tolerance
M=±20%, N=±30%
(6) Control Code
3. Recommended Soldering Condition
3-1. Recommended Land Pattern
3-2. Recommended Soldering Profile
Symbol
Dimension
F
3.0
G
1.0
H
1.0
Temperature(℃)
10s max.
Unit : mm
260
217
200
150
60 ~ 180s
The Recommended Land pattern is for reference only.
Please consult your manufacturing partners to ensure your
company’s PCB design guidelines are met
60 ~ 150s
Time(s)
Not suitable for wave soldering.
The specifications are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering.
Version: 1.3
Page: 1/3
4. Electrical Characteristics
4-1. Electrical Specification
DC Resistance Saturation Current Temperature Rise Current
Inductance
Marking
(L) @1MHz, 0.2V
(RDC) ±30%
(ISAT) Typ. / Max.
(IRMS) Typ. / Max.
Part Number
LQH3010PE-1R0M-C
1.0μH ±20%
0.063Ω
1300mA / 1170mA
2400mA / 2160mA
1R0
LQH3010PE-1R5M-C
1.5μH ±20%
0.077Ω
1100mA / 990mA
2200mA / 1980mA
1R5
LQH3010PE-2R2M-C
2.2μH ±20%
0.087Ω
960mA / 860mA
2000mA / 1800mA
2R2
LQH3010PE-3R3M-C
3.3μH ±20%
0.127Ω
780mA / 700mA
1600mA / 1440mA
3R3
LQH3010PE-4R7M-C
4.7μH ±20%
0.186Ω
650mA / 580mA
1300mA / 1170mA
4R7
LQH3010PE-6R8M-C
6.8μH ±20%
0.253Ω
560mA / 500mA
1000mA / 900mA
6R8
LQH3010PE-8R2M-C
8.2μH ±20%
0.320Ω
460mA / 410mA
920mA / 820mA
8R2
LQH3010PE-100M-C
10.0μH ±20%
0.353Ω
430mA / 380mA
880mA / 790mA
100
LQH3010PE-220M-C
22.0μH ±20%
0.693Ω
310mA / 270mA
580mA / 520mA
220
Note1. Saturation Current for Inductance becomes 30% lower than its initial value
(Test by a short period of time to minimize the self-heating effect of the component.)
Note2. Temperature Rise Current for a 40℃ rise above 25℃ ambient
4-2. Typical Electrical Curve
Inductance vs. DC Current
Temperature Rise vs. DC Current
4-3. Operating Temperature Range
-25℃ to +105℃(Including self - temperature rise)
4-4. Storage Temperature Range
Store this product under the condition of 5℃ to 40℃, 20% to 70%RH and use within 6 months
5. Package Quantity
Standard Quantity for Packaging: 2,000 pcs/Reel
The specifications are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering.
Version: 1.3
Page: 2/3
Note
1. Please make sure that your product is has been evaluated and confirmed against your specifications when our product is
mounted to your product.
2. All the items and parameters in this product specification have been prescribed on the premise that our product is used for
the purpose, under the condition and in the environment agreed upon between you and us. You are requested not to use our
product deviating from such agreement.
3. Please keep the distance between transformer/coil and other components (refer to the standard IEC 950)
4. Void Appearance tolerance Limit
A≦W/2 GOOD
A＞W/2 NG
5. Storage and handling Condition
(1) Products should be used in 6 months from the day of SPORTON outgoing inspection, which can be confirmed.
(2) Products should be storage in the warehouse on the following conditions.
Temperature : 5℃ to +40℃; Humidity: 20% to 70% relative humidity
(3) Don’t store products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of electrode,
resulting in poor solder-ability.
(4) Products should be storage in the warehouse without heat shock, vibration and direct sunlight and so on.
(5) Handing Condition. Care should be taken when transporting or handling product to avoid excessive vibration or
mechanical shock.
The specifications are subject to change or our products in it may be discontinued without advance notice.
Please check with our sales representatives or product engineers before ordering.
Version: 1.3
Page: 3/3