Surge Protection For Business-Critical ContinuityTM Grid to Chip Surge Protection Product Catalog Power Quality Solutions for ALL 'our Application Needs “Dirty” power is a problem. Whether it’s called a surge, spike, transient or noise, “dirty” power is an abnormality in the power that runs your facility. These power problems can leave buildings in the dark and disable equipment, costing you thousands in repairs and lost revenue. Your productivity uptime and reputation depend on consistent power quality. Emerson Network Power Surge Protection provides products and solutions that ensure reliability from Grid to Chip. For more than 30 years, Facility Managers, Engineers, and System Integrators have trusted Emerson Network Power Surge Protection products to protect critical equipment in the Industrial Process, Computing, Research/Testing and Communications fields. Emerson Network Power Surge Protection and the IEEE Standard 1100-1999 (Emerald Book) recommend a properly rated surge protection device should be applied on ALL electrical conductors entering your facility including: power, voice, and data. Without proper protection – data disruption, hardware stress or destruction could occur. As a line of defense against damaging transients, Emerson Network Power Surge Protection manufactures products in the following categories: ■ Transient Voltage Surge Suppressors (TVSS) — which focus on limiting high-voltage spikes to an acceptable level ■ Filtering/Line Conditioning — protect against low-energy transients and high frequency noise and finally\ ■ Data/Signal Line Protection — products guard sensitive instrumentation against what we refer to as abackdoor’ transients and noise. Why allow “dirty” power to put your equipment at risk Turn to Emerson Network Power Surge Protection products for peace of mind. We provide solutions for all your application needs and the foundation for Business-Critical ContinuityX. Table of Contents Products Page # TRANSIENT VOLTAGE SURGE SUPPRESSION TVSS — Product Selection Guide IslaGuard® — IH Series IslaGuard® — IM Series IslaGuard® — IL Series IslaGuard® — IH, IM, IL Ordering Information DRS Series Edco EMC-240B — 120/240 VAC Heavy Duty (Parallel) Edco FAS-120AC — 120 VAC Medium Duty (Parallel) AC-Hardware 2 3 4 5 6 7 8 8 FILTERING/LINE CONDITIONING Filtering/Line Conditioning — Product Selection Guide Islatrol® IE Series — Active Tracking Filter® Islatrol® IC+/LRIC+ Series — Active Tracking Filter® Islatrol® — E Series — Active Tracking Filter® for DC Voltages Islatrol® — SP-6TVN — Industrial Strength Surge Suppression (Series) Islatrol® — RM Series — 120 VAC Rackmount 9 10 12 13 14 15 DATA/SIGNAL LINE PROTECTION Data/Signal Line Protection — Product Selection Guide Edco DRS (DC) Series — DIN Rail Protection Edco PC642 Series — Zone/Loop/Data Edco PHC Series — Two-Pair Signaling Circuit Protector (Modular) Edco RJA-RJD Series — RJ-45 Telephone/Data Edco RM-CAT6-16POE — CAT6-16POE Channel Rackmount Edco CX-HFN-FF/CX-HFN-FM — High Frequency Line Protector — N-Type Edco SLAC Series — AC Power/Signal Edco SS64 & SS65 Series — Wastewater/Industrial Applications Edco CX Series — CCTV & Data Applications/Coax Edco RM-CXO6-16R — Channel Rackmount 16 17 18 19 20 21 21 22 23 24 24 TECHNICAL BULLETINS High-Density Multiple Input Rack Surge Protection for the Water Industry Surge Protection for Power and Signal Lines 25 26 27 Transient Voltage Surge Suppression TVSS — Product Selection Guide Find your application in the left column. Then look across for the appropriate product. PRODUCTS APPLICATIONS Facility Service Entrance Distribution Panels Sub-Distribution Panels Branch Panelboards (Commercial) Branch Panelboards (Residential) Motor Control Centers Control Panels (AC Power) Various OEM Equipment 2 IslaGuard® IH Series IslaGuard® IM Series IslaGuard® IL Series DRS Series Edco EMC Series Edco FAS Series Transient Voltage Surge Suppression IslaGuard® — IH Series Modular Surge Protective Device (SPD) capable of handling the high-impulse, potentially damaging transients commonly found at the service entrance or distribution panels. Its robust design allows for placement and protection in the most severe exposure locations. Features ■ Surge current capacity — 100,000 to 400,000 Amps per phase ■ Status indication includes: audible alarm, form C contact, and internal/external status indication ■ Replaceable modules ensure protected mode flexibility ■ Optional equipment includes rotary disconnect, surge counter, NEMA 3R, 4 or 4X enclosures ■ All voltage and phase configurations ■ Unique MOV/silver link fuse array enables the IH Series to deliver the industry’s most robust design; Coordination between fuse gauge and MOV ensures repeatable strike performance ■ 5 year warranty Performance Technical Specifications General Technical Specifications Clamping Peak Surge Current Capability (8 x 20 µs) Operating Voltage Range UL 1449 Classification* Model: IHxxxx400 Fault Current Rating (AIC) 120/208 Phase: 400,000 Amps Operating Frequency Range Line to Neutral 500 Volts L-N: 200,000 Amps Capacity Line to Line 700 Volts L-L: 200,000 Amps 50 ⍀ EMI/RFI Attenuation Line to Ground 500 Volts L-G: 200,000 Amps Response Time Neutral to Ground 400 Volts N-G: 200,000 Amps Operating Temperature 277/480 Line to Neutral Line to Line Model: IHxxxx200 900 Volts 200,000 Amps Certifications Warranty 1,600 Volts L-N: 100,000 Amps 900 Volts L-L: 100,000 Amps Neutral to Ground 800 Volts L-G: 100,000 Amps N-G: 100,000 Amps Line to Line 1,800 Volts Model: IHxxxx200-2 Line to Ground 1,800 Volts Phase: 200,000 Amps L-N: 200,000 Amps L-L: 200,000 Amps * UL classifications for other voltages available upon request. L-G: N-G: 200 kAIC 47 - 63 Hz Continuous 50 dB < 0.5 ns -40°C to +50°C Operating Humidity Phase: Line to Ground 480 +/- 15% 0% to 95% UL 1449, 1283, CUL, CE 5 Year Dimensional Diagram N/A 200,000 Amps Model: IHxxxx100-2 Phase: 100,000 Amps Model A B C D E F L-N: 100,000 Amps IHxxxY400 16 14 8 16.75 12 .31 L-L: 100,000 Amps IHxxxD400 16 14 8 16.75 12 .31 L-G: N/A IHxxxY200-2 16 14 8 16.75 12 .31 100,000 Amps IHxxxD200-2 16 14 8 16.75 12 .31 IHxxxY200 16 14 8 16.75 12 .31 IHxxxD200 16 14 8 16.75 12 .31 IHxxxY100-2 16 14 8 16.75 12 .31 IHxxxD100-2 16 14 8 16.75 12 .31 N-G: 3 Transient Voltage Surge Suppression IslaGuard® — IM Series A compact Surge Protective Device (SPD) designed to protect electronic equipment and microprocessor-based systems from transients on distribution and sub-distribution panels, or any medium exposure locations. Features ■ Form C contact for remote indication, LED status indication, and audible alarm standard ■ Surge current capacity — 100,000 to 160,000 Amps per phase ■ All mode and 2 mode protection option ■ Sand encapsulation ■ Small footprints ■ Thermal protection ■ All voltage and phase configurations ■ Silver link fusing ■ NEMA 12 metal enclosure ■ 5 year warranty Performance Technical Specifications General Technical Specifications Clamping Peak Surge Current Capability (8 x 20 µs) Operating Voltage Range Model: IMxxxx160 Fault Current Rating (AIC) UL 1449 Classification* Model 100-2 Model 160 L-N: 80,000 Amps Capacity Line to Neutral 400 Volts 400 Volts L-L: 80,000 Amps 50 ⍀ EMI/RFI Attenuation Line to Line 800 Volts 800 Volts L-G: 80,000 Amps Dry Contact Rating Line to Ground 800 Volts 400 Volts N-G: 80,000 Amps Response Time Neutral to Ground 400 Volts 400 Volts Model: IMxxxx100-2 120/208 277/480 Line to Neutral Phase: 160,000 Amps 65 kAIC Operating Frequency Range 47 - 63 Hz Continuous 40 dB 125 VAC, 8A, 1.0 pf < 0.5 ns Operating Temperature Phase: 100,000 Amps Operating Humidity 800 Volts 800 Volts L-N: 100,000 Amps Certifications Line to Line 1,500 Volts 1,500 Volts L-L: 100,000 Amps Warranty Line to Ground 1,500 Volts 800 Volts L-G: N/A 800 Volts 800 Volts N-G: 1,500 Volts 2,500 Volts 800 Volts 1,500 Volts Neutral to Ground +/- 15% -45°C to +50°C 0% to 95% UL 1449, CUL 5 Year 100,000 Amps 480 Line to Line Line to Ground Dimensional Diagram * UL classifications for other voltages available upon request. 4 Model A B C D E F IMxxxY160 8 6 4 8.75 4 .31 IMxxxD160 8 6 4 8.75 4 .31 IMxxxY100-2 6 4 3 6.75 2 .31 IMxxxD100-2 6 4 3 6.75 2 .31 Transient Voltage Surge Suppression IslaGuard® — IL Series Electronic grade Surge Protective Device (SPD) designed to protect electronic equipment and microprocessor-based systems from transients on sub-distribution panels, branch panels, or equipment located in low exposure locations. Features ■ Surge current capacity — 25,000 to 100,000 Amps per phase ■ Sand encapsulation ■ Thermal protection ■ All mode and 2 mode protection option ■ Silver link fusing ■ Small footprint ■ 5 year warranty ■ All voltage and phase configurations ■ LED status indication and form C contact for remote indication Performance Technical Specifications General Technical Specifications Clamping Peak Surge Current Capability (8 x 20 µs) Operating Voltage Range +/- 15% UL 1449 Classification* Model ILxxxx100 Fault Current Rating (AIC) 22 kAIC Model 25-2 Models 50 & 100 120/208 Line to Neutral 500 Volts 500 Volts Line to Line 800 Volts 800 Volts Line to Ground 800 Volts 500 Volts Neutral to Ground 500 Volts 500 Volts 120/240 Line to Neutral 500 Volts 500 Volts Line to Line 800 Volts 800 Volts Line to Ground 800 Volts 500 Volts Neutral to Ground 500 Volts 500 Volts 900 Volts 900 Volts Line to Line 1,800 Volts 1,800 Volts Line to Ground 2,500 Volts 1,000 Volts Neutral to Ground 1,200 Volts 1,200 Volts Line to Ground Operating Frequency Range 50,000 Amps Capacity L-L: 50,000 Amps 50 Ω EMI/RFI Attenuation L-G: 50,000 Amps Dry Contact Rating N-G: 50,000 Amps Response Time Model ILxxxx50 Operating Temperature Phase: 50,000 Amps Operating Humidity L-N: 25,000 Amps Certifications L-L: 25,000 Amps Warranty L-G: 25,000 Amps N-G: 25,000 Amps Phase: 25,000 Amps L-N: 25,000 Amps L-L: 25,000 Amps L-G: N-G: 480 Line to Line 100,000 Amps L-N: 47 - 63 Hz Continuous 40 dB 125 VAC, 8 A, 1.0 pf < 0.5 ns -40°C to +50°C 0% to 95% UL 1449, CUL, CE 5 Year Dimensional Diagram Model ILxxxx25-2 277/480 Line to Neutral Phase: 1,800 Volts N/A 25,000 Amps 1,800 Volts 1,800 Volts * UL classifications for other voltages available upon request. 5 Transient Voltage Surge Suppression IslaGuard® — Ordering Information ® IslaGuard High Exposure Model Number : I H 1 2 3 6 IslaGuard® Medium Exposure Model Number : I M How to Specify the Appropriate Model All model numbers begin with a prefix (IH, IM, IL). Moving from left to right, choose correct configuration from each column for your application. Your completed model number should look similar to the example below: 1 2 4 IslaGuard® Low Exposure Model Number : I L 1 2 5 Example Part Number: IH 120 L 200 X 1 Voltage Code Nominal Voltage Level 2 Phase Configuration Model Identification L–N L–L L–G 120 N/A 120 120 208 120 120 240 120 N/A 240 240 240 277 480 277 277 N/A 480 480 480 120 Phase Configuration Single Phase 2 Wires + Gnd (Line & Neutral) N Single Phase 2 Wires + Gnd (Line & Line) L Single (Split) Phase 3 Wires + Gnd S Three Phase Wye 4 Wires + Gnd Y Three Phase Delta 3 Wires + Gnd D Three Phase Delta Hi-Leg 4 Wires + Gnd H Three Phase Wye w/no Neutral 3 Wires + Gnd X 4 Surge Capacity (Medium Exposure) 160 kA Model Identification Model Identification 400 kA L–N L–G N–G 200 200 200 400 Model Identification L–N 200 L–G N–G N/A 200 200 kA L–N L–G N–G 100 100 100 Surge Capacity Per Phase (L-N + L-G) 100 kA Model Identification L–G N–G 100 N/A 100 100-2 6 Options Option Model Identification Rotary Disconnect R L–G N–G L–N L–G N–G Surge Counter C 80 80 80 50 50 50 NEMA 3R Enclosure 3R 100-2 100 200 100 kA L–N 5 Surge Capacity (Low Exposure) 160 200-2 L–N 100 kA 50 kA L–N L–G N–G L–N 100 N/A 100 25 50 L–G N–G 25 25 200 kA 25-2 L–N L–G N–G 25 N/A 25 Recommended Connections 6 Surge Capacity Per Phase (L-N + L-G) 200 kA Other voltages available, please consult factory. Surge Capacity Per Phase (L-N + L-G) 3 Surge Capacity (High Exposure) NEMA 4 Enclosure 4 NEMA 4X Enclosure 4X Transient Voltage Surge Suppression DRS Series Modular Surge Protective Device (SPD) designed to be easily installed in existing AC panelboards and control panels using standard DIN rail mounting brackets. These devices offer both normal and common surge protection up to 40 kA per phase. Features ■ Effectively handles high-energy transients on TT, TN-C, TN-S and TN-C-S three-phase power systems ■ SPD rated Type 2 in accordance with EN 61643-11; Class I & II in accordance with IEC 61643-1 ■ Built-in thermal components disconnect SPD from the power source to avoid thermal runaway conditions ■ MOV only or MOV+Gas Tube models available ■ Fast response time, high surge current capability, low voltage protection levels ■ Visual inspection window on each module indicates status ■ 3-pole terminal provides remote status monitoring ■ DIN rail mounting and plug-in module design allow for easy installation, maintenance and replacement of surge element ■ 5 year warranty How to Specify the Appropriate Model Example: DRS 120 3 1 Q Nominal Voltage (Un) (XXX) # of Metal Oxide Varistor Modules* (X) # of Gas Tube Modules** (X) Higher Rated Voltage*** (Optional) 120 0 0 Q 230 1 1 240 2 277 3 346 4 *MOV modules are typically one module per phase and may be wired L-N, L-G or N-G. **Gas Tube modules typically used in the N-G mode for type TT grounding systems. ***Certain applications require higher rated components in order to survive frequent voltage rises, in this case order a unit with a “Q” at the end of the part number. 480 600 Replacement modules available: Order DRS + Un + M (for MOV) or G (for Gas Tube) Performance Technical Specifications DRS12031 DRS23031 DRS27731 DRS34631 Electrical Characteristics System Voltage Type of Network 120/208, 230/400, 220/380, 277/480, 127/220 VAC 240/415 VAC 254/440 VAC TT-TN 346/600 VAC TT-TN TT-TN TT-TN Modes of Protection L-N; N-PE L-N; N-PE L-N; N-PE L-N; N-PE Nominal Voltage Un–120 V Un–230 V Un–277 V Un–346 V Rated Voltage (MCOV) Uc–150 V Uc–320 V Uc–320 V Uc–420 V Nominal Discharge Current (8 x 20 µs) 1n–20 kA Test Standards EN 61643-11 Type 2 IEC61643- 1:1998-02 Class II Mechanical Characteristics Dimensions (Length x Width x Height) 70.8mm x 90.5mm x 68mm I/O Connections By Screw Terminal: 4-25 mm2 By Connection Bus MOV Encapsulation Material Disconnection Indicator 1n–20 kA 1n–20 kA 1n–20 kA Status Monitoring Mounting Maximum Discharge Current Imax–40 kA Imax–40 kA Imax–40 kA Imax–40 kA Voltage Protection Level Up–1.2 kV Up–1.6 kV Up—1.6 kV Up–2.0 kV Response Time TS–25 ns TS–25 ns TS–25 ns TS–25 ns 95% 95% 95% 95% Risol > 103 MV Risol > 103 MV Risol > 103 MV Risol > 103 MV Relative Humidity Isolation Resistance Operation Temperature Range Degree of Protection Disconnection Device Housing Material Epoxy Resin Mechanical Indicator Remote Alarm Terminals Symmetrical Rail (EN50022/DIN46277-3) -40°C to +85°C IP 20 Thermal Cutoff System ABS/PA UL94V0 7 Transient Voltage Surge Suppression Edco EMC-240B 120/240 VAC Heavy Duty (Parallel) The Edco EMC 240B surge suppressor is designed to protect AC distribution panel circuits or 120 V power supplies feeding sensitive electronic equipment. Electrically, the unit incorporates MOV and thermal fusing technology. The Edco EMC 240B is designed to be installed in parallel on standard single phase 120 VAC (L,N,G) circuits. Features ■ Fast response time ■ Operational status indicators ■ 40,000 Amps per phase capacity ■ UL 1449 listed and OWHX listed ■ Failsafe and fused ■ 5 year warranty 1449 General Technical Specifications Operating Voltage 120/240 VAC Clamping Voltage 395 VAC Fault Current Rating (AIC) 42 kAIC Operating Current Total Peak Surge Current EMI Attenuation (100 kHz to 100 MHz) SPD Technology > 40 dB Metal Oxide Varistors (MOVs) Modes of Protection Line-to-Line, Line-to-Neutral NA, Parallel 80 kA (8 x 20 µs) Status Indication Power On & MOVs functional 47-63 Hz Connection Type Wire Leads Operating Frequency Operating Temperature Dimensions (Inches) -40°C to +85°C 4.6H x 2.2W x 2.8L Weight Certifications 13.5 oz UL 1449, Suppressor/ OWHX Arrester Edco FAS-120AC 120 VAC Medium Duty (Parallel) AC-Hardware The Edco FAS-120AC surge suppressor is designed to protect AC distribution panel circuits or 120 V power supplies feeding sensitive electronic equipment. Electrically, the unit incorporates MOV and thermal fusing technology. The Edco FAS-120AC is designed to be installed in parallel on standard single phase 120 VAC (L,N,G) circuits. Features ■ LED indicator ■ Compact size ■ Fast response time ■ Liquid tight conduit fitting ■ Thermal fuse ■ UL 1449 listed ■ L-G, L-N, & N-G protection ■ 5 year warranty General Technical Specifications 120 VAC SPD Technology Clamping Voltage 325 VAC Modes of Protection Operating Current NA, Parallel Operating Voltage Total Peak Surge Current Line-to-Neutral, Line-to-Ground, Neutral-to-Ground 15.5 kA (8 x 20 µs) Status Indication Power On & MOV Functional 47-63 Hz Connection Type Wire Leads Operating Frequency EMI Attenuation (100 kHz to 100 MHz) 8 Metal Oxide Varistors (MOVs) > 25 dB Operating Temperature -40°C to +85°C Dimensions (Inches) Weight Certifications 2.5H x 1.5W x 3.0L 4.2 oz UL 1449 Filtering/Line Conditioning Filtering/Line Conditioning — Product Selection Guide Find your application in the left column. Then look across for the appropriate product. PRODUCTS APPLICATIONS Islatrol® IE Series Programmable Logic Controllers Control Panels (AC Power) Various OEM Equipment Home Entertainment/Office Islatrol® IC+/LRIC+ Series Islatrol® SP-6TVN Series Islatrol® RM Series * * * * * * AC Rack Equipment 9 Filtering/Line Conditioning Islatrol® IE Series Active Tracking Filter® Series connected DIN/flange mount high-frequency noise filter/surge suppressor. Ideal applications include critical industrial loads drawing up to 20 Amps of continuous current. Typical applications include any microprocessor-based products, including industrial PLCs, OEM applications, and motion control systems. Features ■ Multi-staged design, combining a unique hybrid clamping network with the active tracking technology of the Islatrol ® family ■ LED status indication and form C contact for remote indication ■ DIN mountable enclosure ■ Surge current capacity — 45,000 Amps ■ UL 1449, 1283, CUL recognized, CE ■ Transient protection in all modes: line to neutral, line to ground, and neutral to ground Performance Technical Specifications General Technical Specifications Ordering Information UL 1449 Surge Voltage Rating Voltage* MCOV Continuous Current Model 120V Normal Mode 330 Volts 120 Volt 150 VRMS 120 V 3 Amps IE-103 120V Common Mode 400 Volts 240 Volt 275 VRMS 120 V 5 Amps IE-105 240V Normal Mode 600 Volts Line Frequency 47 - 63 Hz 120 V 10 Amps IE-110 240V Common Mode 800 Volts Connection Terminal 120 V 20 Amps IE-120 Peak Surge Current Capability (8 x 20 µs) Mounting Type Line to Neutral Weight 15,000 Amps Line to Ground 15,000 Amps Response Time Neutral to Ground 15,000 Amps Normal Mode Total 45,000 Amps Frequency Response (Forward-Reverse) Normal Mode Common Mode 100 kHz to 50 MHz - 90 dB Min 5 MHz to 50 MHz - 60 dB Min Typical Category A Ringwave (6 kV, 200 A, 100 kHz) Normal Mode/Common Mode 3 Amp 1 V/300 V 5 Amp 0.7 V/292 V 10 Amp 0.7 V/300 V 20 Amp 0.7 V/300 V Typical Category B Ringwave (6 kV, 500 A, 100 kHz) Normal Mode/Common Mode 10 ■ 10 year warranty 3 Amp 178 V/300 V 5 Amp 162 V/291 V 10 Amp 153 V/300 V 20 Amp 200 V/300 V DIN/Flange < 3 lbs Voltage* 240 V Common Mode Operating Temperature Model 3 Amps IE-203 < 0.5 ns 240 V 5 Amps IE-205 < 5 ns 240 V 10 Amps IE-210 -40°C to +45°C 240 V 20 Amps IE-220 Derate Linearly to 60% at +70ºC Operating Humidity Continuous Current * All voltage configurations are single phase - 2 wire + gnd. 0% to 95% Dimensional Diagram Filtering/Line Conditioning Islatrol™ IE Series Active Tracking Filter™ System Design Shunt Absorbing Components line side sine wave tracking circuitry Shunt Absorbing Components load side sine wave tracking circuitry Finger Safe Terminals IEC 998 approved terminals Form C Relay Contacts normally open and normally closed dry contact for remote status monitoring Unit Status Indicator green LED monitors the operational status of the Elite Series MOV Array high-energy surge current diversion array providing transient protection line to neutral, line to ground, and neutral to ground Series Blocking Inductor voltage blocking current soothing inductor Pulse Capacitor high-frequency noise absorption DIN Rail Mountable mounts to standard 35 mm industrial DIN rail; rotates 90° for mounting flexibility Connection Diagram 11 Filtering/Line Conditioning Islatrol® IC+/LRIC+ Series Active Tracking Filter® Series connected high-frequency noise filter with transient protection. Offers the flexibility of either receptacle/line cord connection or hard-wired connection to critical loads (up to 30 Amperes). Applications include industrial or office equipment, computers placed in harsh environments. Features ■ Typically reduces normal mode transients to +/-2 volts ■ LED power indication ■ UL 1283, CSA recognized ■ Surge current capacity — 45,000 Amps ■ 10 year warranty ■ Transient protection in all modes: line to neutral, line to ground, and neutral to ground 1283 MCOV Typical Category A Ringwave (6 kV, 200 A, 100 kHz) 120 Volt 150 VRMS Model Normal Common 240 Volt 275 VRMS IC+102 / LRIC+102 1.0 / 0.9 302 / 287 Line Frequency 47 - 63 Hz IC+105 / LRIC+105 0.7 / 0.8 292 / 307 IC+107 / LRIC+107 0.7 / 0.7 302 / 293 IC+115 / LRIC+115 0.7 / 0.7 304 / 306 IC+130 / IC+202 0.5 / 1.1 306 / 536 IC+205 / IC+207 1.5 / 0.8 628 / 616 IC+215 / IC+230 0.6 / 0.9 572 / 566 Response Time Normal Mode < 0.5 ns Common Mode <5ns Operating Temperature -40°C to +45°C at Full Load Derate Linearly to 60% at +70ºC Operating Humidity 0% to 95% Model Normal Common Peak Surge Current Capability (8 x 20 µs) IC+102 / LRIC+102 178 / 188 302 / 285 Line to Neutral 15,000 Amps IC+105 / LRIC+105 162 / 191 291 / 300 Line to Ground 15,000 Amps IC+107 / LRIC+107 173 / 190 300 / 298 Neutral to Ground 15,000 Amps IC+115 / LRIC+115 153 / 149 307 / 309 Load Surge Current Rating IC+130 / IC+202 241 / 302 299 / 532 10 mSec 5 x Nominal IC+205 / IC+207 378 / 336 594 / 596 1 sec 3 x Nominal IC+215 / IC+230 272 / 342 548 / 578 10 sec 2 x Nominal Packaging • High Impact Plastic Case • Vacuum Impregnated Magnetics • Epoxy Encapsulated Frequency Response (Forward-Reverse) Normal Mode Common Mode 12 Typical Category B Ringwave (6 kV, 500 A, 100 kHz) 100 kHz to 50 MHz - 90 dB Min 5 MHz to 50 MHz - 60 dB Min System Design Series Blocking Inductors voltage blocking current smoothing inductors Shunt Absorbing Components sine wave tracking circuitry MOV Transient Protection high-energy transient protection line to neutral, line to ground, neutral to ground Pulse Capacitor high-frequency noise absorption Note: All measurements in volts. IEEE test results with no AC applied. Normal mode—L1-N or L1-L2; Common mode—L-G, N-G or L1-G, L2-G. Connection Diagram Filtering/Line Conditioning Islatrol® IC+/LRIC+ Series Active Tracking Filter® Ordering Information Dimensional Diagram 120 VAC Models with barrier strip at input and output/with wire leads at input and output (WL) F B Model Rated Output (Amps) Case Dimensions (In) AxBxC Mounting Flange Dimensions (In) DxExFxG Screw Size Weight (lbs) IC+102 / IC+102WL 2.5 4 x 2.88 x 1.81 4.38 x 2.12 x 5.31 x 0.19 #6 1.0 IC+105 / IC+105WL 5.0 4 x 2.88 x 1.81 4.38 x 2.12 x 5.31 x 0.19 #6 1.3 IC+107 / IC+107WL 7.5 4.75 x 4.75 x 2.35 5.25 x 3.50 x 6.25 x 0.19 #6 2.0 IC+115 / IC+115WL 15 6.25 x 4.75 x 2.35 6.75 x 3.50 x 7.75 x 0.19 #8 3.5 IC+130 / IC+130WL 30 7.75 x 4.75 x 2.35 8.25 x 3.50 x 9.00 x 0.19 #8 6.0 A C D M DIMOUN EN TING SIO NS G E 120 VAC Models with 5 foot line cord and single NEMA 5-15 receptacle Model Rated Output (Amps) Case Dimensions (In) AxBxC Mounting Flange Dimensions (In) DxExFxG Screw Size Weight (lbs) LRIC+102 2.5 4.5 x 3.0 x 1.88 N/A N/A 1.3 LRIC+105 5.0 4.5 x 4.5 x 2.38 N/A N/A 2.0 LRIC+107 7.5 6.0 x 4.5 x 2.38 N/A N/A 2.3 LRIC+115 15 7.5 x 4.5 x 2.38 N/A N/A 4.0 240 VAC Models with barrier strip at input and output/with wire leads at input and output (WL) F B Model Rated Output (Amps) Case Dimensions (In) AxBxC Mounting Flange Dimensions (In) DxExFxG Screw Weight Size (lbs) IC+202 / IC+202WL 2.5 4 x 2.88 x 1.81 4.38 x 2.12 x 5.31 x 0.19 #6 1.3 IC+205 / IC+205WL 5.0 4.75 x 4.75 x 2.35 5.25 x 3.50 x 6.25 x 0.19 #6 2.0 IC+207 / IC+207WL 7.5 6.25 x 4.75 x 2.35 6.75 x 3.50 x 7.75 x 0.19 #8 3.3 IC+215 / IC+215WL 15 7.75 x 4.75 x 2.35 8.25 x 3.50 x 9.00 x 0.19 #8 5.8 IC+230 / IC+230WL 30 7.75 x 4.75 x 2.35 8.25 x 3.50 x 9.00 x 0.19 #8 6.0 A C D M DIMOUN EN TING SIO NS G E Islatrol® E Series F B A Active Tracking Filter® for DC Voltages C Provides continuous sine wave Active Tracking® filtration, normal mode (line to line or line to neutral) for protection from spikes, transients, and noise on AC power line. M DIMOUN EN TING SIO NS D G E Available in either hardwired, printed circuit board mount, wire lead mount or single receptacle/line cord configurations, single phase or three phase, 50/60 Hz. Ordering Information 35 VDC, printed circuit board mount or with wire leads at input and output (Add “WL” suffix in place of “PC” suffix.) Model Number E-025PC E-05PC E-1PC Amperes 0.25 0.50 1.00 Weight (lbs) 1 1 1 100 VDC with barrier strips at input and output Model Number E-1 (only 35 VDC) E-2 E-5 E-7 E-15 E-30 E-50 E-100 Amperes 1.0 2.5 5.0 7.5 15.0 30.0 50.0 100.0 Weight (lbs) 3 3 3 3 9 9 10 15 Islatrol® Active Tracking Filters® carry a 10 year warranty 13 Filtering/Line Conditioning Islatrol® — SP-6TVN Industrial Strength Surge Suppression (Series) The Islatrol® SP-6TVN is an industrial-strength surge suppression/filtering device that plugs into a standard duplex receptacle. It features uniquely designed repositionable outlets for easy installation behind desks and other furniture. It protects your sensitive home or office equipment, including TVs, home theaters, satellite dishes, computers, printers, copiers, and fax machines, from damaging power disturbances traveling through your wiring into your electrical outlets. Features Repositionable Outlets ■ Plugs into standard 120 V, 15 Amp electrical outlet ■ Perfect for tight spaces, behind furniture and appliances ■ Total peak surge current capacity of 39,000 Amps ■ Intelligent monitoring against improper wiring/grounding ■ Cables for telephone, video, and data connections ■ 60 dB maximum high frequency ■ Operational indicator lamp ■ Repositionable outlets rotate to accommodate available space ■ 5 year limited warranty General Technical Specifications AC Power Protection Nominal Operating Voltage 120 VAC, Single Phase Operating Voltage Range 120 VAC +/- 10% Operating Frequency Range 265 V Common Mode 290 V ANSI/IEEE C62.41 Cat B Ringwave (6 kV, 500 A, 100 kHz) Normal Mode 275 V Common Mode 290 V 47 — 63 Hz Rated Output (Amps) 15 Amperes ANSI/IEEE C62.41 Category Connection Type ANSI/IEEE C62.41 Cat A Ringwave (6 kV, 200 A, 100 kHz) Normal Mode Category A & B (6) 5-15R Receptacles and 5-15P Plug Phase Configuration Size Enclosure Weight Modes Of Protection Indication of Suppression Status Response Time Certifications 2 Wire + Gnd 7.5 x 4.75 x 1.75 (Inches) Frequency Response Normal Mode 2.0 lbs (0.9 kgs) Low Voltage Protection Video 1 & 2 L — N, L — G, N — G Status Indicator < .5 ns Normal Mode Connection Type CablesProvided 5 Year 130 VAC Protection Level Clamping Voltage (DC) 14 Phone Network Type “F” Type RJ-11 Type RJ-45 6'(2x)Type“F” 6'Ends 6'RJ-11Male 6'Ends 6'RJ-45Male Ends 5 kA (8 x 20 µs) 2 kA (10 x 1000 µs) 3 kA (8 x 20 µs) UL 1449 Listed Capacitance Maximum Continuous Operating Voltage (MCOV) Line to Neutral 40 dB Maximum, forward/reverse, 5 MHz to 50 MHz High Impact Plastic Peak Surge Current Warranty 60 dB Maximum, forward/reverse, 100 kHz to 50 MHz Common Mode Attenuation Peak Surge Current (8 x 20 ms) Line to Neutral 13,000 Amps Line to Ground 13,000 Amps Neutral to Ground 13,000 Amps Total 39,000 Amps <12 pf <50 pf <70 pf L-G T-R, T-G, R-G L-G (8 Lines) 145 V 270-350 V 30 V 1 dB @ 2 Ghz N/A N/A Filtering/line Conditioning islatrol® — rM Series 120 VAC Rackmount This line of A­C surge protectors is ideal for protecting the power feeding valuable rack equipment. A­ll models provide ten protected outlets on the back and two protected convenience outlets on the front. This series provides 40,000 A­mps of surge protection and up to 60 dB of high-frequency noise filtering. Status LEDs indicate the correct power is coming to the unit, whether Model shown: rM-115-10 rM the unit is properly grounded and whether the surge components are still in tact. Units are available with an optional digital meter, mounted on the front of the unit, that will monitor the voltage, current and power of the protected equipment. Features n 40 kA­ surge protection n Digital meter n 60 dB max noise filtering n Optional twist lock plug n 15 & 20 A­ models available n 1 year warranty n Power, ground and surge status indicators general Technical Specifications Voltage amperage Plug (NEMa) receptacles (NEMa) digital Meter locking Plug RM-115-10RM Model 120 V 15 A­ 5-15P 5-15R Yes No RM-120-10RM 120 V 20 A­ 5-20P 5-20R Yes No rackmount aC Power Protection Rated Voltage 120 V Rated Current 15 A­ & 20 A­ Peak Surge Current Response Time EMI/RFI Filtering LED Indicators Digital Meter (Optional) Input Power 15 A­ Models 20A­ Models 20 kA­/mode, 40 kA­/phase <5 ns 60 dB Max Green-Power on Green-Ground OK Green-Surge Circuit OK Voltage A­mps, Watts, VA­, Hz, PF, Kwh, and Clock Output Receptacles 15A­ Models 20A­ Models Thermal Protection Overcurrent Protection Dimensions Certifications Warranty Front- (2) NEMA­ 5-15R Back- (10) NEMA­ 5-15R Front- (2) NEMA­ 5-20R Back- (10) NEMA­ 5-20R Thermal Protected MOVs Circuit 1.75”H x 19”W x 3.8”D (1U) UL1449 1 Year SJT 14/3C Power Cord (15 ft) with NEMA­ 5-15P Plug SJT 12/3C Power Cord (15 ft) with NEMA­ 5-20P Plug NEMA­ L5-20P Plug- Optional 15 Data/Signal Line Protection Data/Signal Line Protection — Product Selection Guide Find your application in the left column. Then look across for the appropriate product. PRODUCTS APPLICATIONS Transmitters Telephone Industrial Communications Signaling Circuits Programmable Logic Controllers (I/O) Circuits Control Panels (Low Voltage) Communication Rack Equipment Video Equipment Video Rack Equipment Water/ Wastewater Instrumentation 16 Edco DRS Series Edco PC642 Series Edco PHC Series Edco RJA/RJD Series Edco RM-CAT6 Series Edco SLAC Series Edco SS64/65 Series Edco CX Series Edco RM-CX06 Series Data/Signal Line Protection Edco DRS (DC) Series DIN Rail Protection The Edco DRS (DC) Series is a DIN rail mountable, single-pair surge suppression module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance several orders of magnitude when over-currents exceed safe levels. A normal state resumes when over-currents are removed. The ability to self-restore in this manner significantly increases suppressor performance and survivability. The Edco DRS (DC) Series mounts onto a standard 35 mm industrial DIN rail. There are three “Field Side” and three “Electronics Side” screw terminals. One is reserved for a shield. Three electrically tied ground terminals are provided for grounding the Edco DRS Series unit to Building-Approved Ground. Shield is isolated from ground. For a 2-terminal version without a shield, order the Edco DRS-XXX-2. Features Low-voltage data surge protection Easy installation Three-stage hybrid protection Fits standard 35 mm DIN rail Sneak/fault current protection with resettable fuses — PTCs Fast response time < 1 nanosecond Low profile packaging 5 year warranty UL 497B listed * General Technical Specifications Part Number Maximum PeakSignal Voltage Nominal Breakdown Voltage Surge 1p10x1000µs Current Dimensional Diagrams PeakCurrent 8x20µs Waveform Typ Cap (pf) Maximum Continuous Current(ma) Nominal Series Resistance DRS-008 6 8 >100 10 kA 1500 150 5 Ohms DRS-015 12 15 >100 10 kA 1500 150 5 Ohms DRS-232 15 22 >100 10 kA 1500 150 5 Ohms DRS-030 24 30 >100 10 kA 1500 150 5 Ohms DRS-036 30 36 >100 10 kA 1500 150 5 Ohms DRS-043 35 43 >100 10 kA 1500 150 5 Ohms DRS-050 43 50 >100 10 kA 1500 150 5 Ohms DRS-060 52 60 >100 10 kA 1500 150 5 Ohms *DRS-175 **DRS-130 200 170 250 200 >10 >10 8 kA 8 kA 1500 1500 150 5000 DRS-XXX 5 Ohms None *NOT UL 497B listed **Warning!! DRS-130RMS is for Discrete Signal Use Only. Do not use DRS-130RMS on 120 VAC Power Lines. This unit is a non-hybrid, MOV design, rated above 5 A operational current and can withstand greater than eight occurrences of a 10 kA 8 x 20 µs waveform, and greater than 1000 occurrences of a 200 A 10 x 1000 µs waveform. DRS-XXX-2 (2 terminal version) 17 Data/Signal Line Protection Edco PC642 Series Zone/Loop/Data The Edco PC642 Series surge suppressor is a two-pair (four-wire) module implementing three-stage hybrid technology. This module addresses over-voltage transients with gas tubes and silicon avalanche components. In addition, sneak and fault currents are mitigated with resettable fuses (PTCs). The PTCs increase resistance several orders of magnitude when over-currents exceed safe levels. A normal state resumes when over-currents are removed. The ability to self-restore in this manner significantly increases suppressor EDCO PCB1B BASE SOLD SEPARATELY performance and survivability. The Edco PC642 card edge module is gold-plated, double-sided, and is designed to mate with the Edco PCB1B gold-plated female terminal connector. When snapped together, the data circuits “pass thru” the protector in a serial fashion from the four “Field Side” terminals to the four “Electronics Side” terminals. Terminals 1 or 10 of the Edco PCB1B must be attached to BuildingApproved Ground per Edco Technical Bulletin # 2015. Features ■ Three-stage hybrid protection ■ Fast response time ■ Sneak/fault current protection ■ Requires Edco PCB1B base ■ Resettable fusing — PTCs ■ PC642PTU (Pass Thru Unit) available for troubleshooting ■ Low capacitance option ■ 5 year warranty ■ Plug-in module General Technical Specifications Ordering Information Maximum Continuous Operating Voltage (MCOV) 5, 12, 18, 24, 30, 36, 43, 52, (60-250) VDC Clamping Voltage 8, 15, 20, 30, 36, 43, 50, 60, 300 VDC RS423, Token Ring: PC642C-008LC & PCB1B 0.15 A E-NET, 10 BASE T: PC642C-030LC & PCB1B Operating Current Peak Surge Current 4–20ma: PC642C-020 & PCB1B PC642C-036 & PCB1B GDT, SAD, w/Series PTC Terminal block w/compression lugs Terminals accept up to 10 AWG Operating Temperature Dimensions (Inches) Certifications RS232: PC642C-008LC & PCB1B < 0.1 dB at 20 MHz SPD Technology Weight RS485, RS422: 0 to 20 MHz Insertion Loss Connection Type APPLICATION: 10 kA (8 x 20 µs) Frequency Range -40°C to +85°C 2H x 1W x 2.5L (PC642 + PCB1B Base) 1 oz UL 497B Caution: The hybrid design of this product includes series resistance. Do not place this product in service on any signal line capable of supplying more than 150 milliamperes continuously. 18 Terminal Assignments DO NOT daisy chain grounds. NOT intended for shield termination. Install ground in accordance with all applicable codes. How to Specify the Appropriate Model Data/Signal Line Protection Edco PHC Series Two-Pair Signaling Circuit Protector (Modular) The Edco PHC Series is designed to protect two pairs of wires specifically for alarm and security systems where operating currents can be as high as 5 Amps. Electrically, the Edco PHC Series is a rugged series hybrid implementing a staged complement of MOVs, copper wound inductors and Silicon Avalanche Diodes. This design reduces series resistance to 0.2 Ohms per pair. These products are intended to mate with an Edco PCB1B gold-plated female terminal connector. The Edco PHC modules plug into a base assembly (Edco PCB1B). The base assembly can be mounted to any flat surface and should be located as close as practical to the protected equipment. Terminal 1 and/or terminal 10 should be connected to Building-Approved Ground with 12 or 10 gauge solid wire. Features EDCO PCB1B BASE SOLD SEPARATELY ■ Three-stage protection ■ Continuous current up to 5 Amps ■ Differential protection ■ UL 497B listed ■ Common mode protection ■ Requires Edco PCB1B base ■ Plug-in module ■ PC642PTU (Pass Thru Unit) available for troubleshooting ■ Automatic recovery ■ 5 year warranty ■ Fast response time Terminal Assignments General Technical Specifications Operating Voltage 12, 18, 24, 36, 52, 60, 120 VDC Clamping Voltage 15, 20, 30, 43, 60, 70, 150 VDC Operating Current How to Specify the Appropriate Model 5A Peak Surge Current 10 kA (8 x 20 µs) Frequency Range 0 to 10 MHz Insertion Loss < 0.1 dB at 10 MHz SPD Technology Connection Type Ordering Information MOV, SAD, w/Series Inductor Terminal block w/compression lugs Terminals accept up to 10 AWG Operating Temperature Dimensions (Inches) -40°C to +85°C 3.7H x 1.75W x 2.375L (PHC + PCB1B Base) Weight DO NOT daisy chain grounds. NOT intended for shield termination. Install ground in accordance with all applicable codes. Dimensions 8 oz Certifications UL 497B Applications Part Number 24V Horn, Strobe, Bell: 70V Speaker Lines: PHC-043 & PCB1B PHC-SP70 & PCB1B 19 Data/Signal Line Protection Edco RJA-RJD Series RJ-45 Telephone/Data The Edco RJA and Edco RJD Series are four pair telephone/data line protectors that implement advanced two stage hybrid design. These units address over-voltage transients with silicon breakover devices, while sneak and fault currents are mitigated with PTC technology, which consists of solid state resettable fuses. The Edco RJA and Edco RJD Series incorporate RJ-45 female jacks in and out. The Edco RJA voltage clamp is set for C.O. Trunks and Analog Telephone Extensions (with ring in voltage), and the Edco RJD voltage clamp is set for Digital Extensions (no ring in voltage). Features General Technical Specifications ■ Tip and ring to ground protection ■ Solid-state resettable fuses-PTCs ■ CAN/CSA C22.2, No. 226-92 Compliant ■ Silicon breakover technology ■ UL 497A listed ■ Low capacitance ■ 4 pair protection ■ Line-to-line protection ■ 5 year warranty Installation Ordering Information Operating Voltage 48, 220 VDC Analog Phone RJA-45 Clamping Voltage 55, 280 VDC Digital Phone RJD-45 Operating Current 0.15 A Peak Surge Current Frequency Range Insertion Loss SPD Technology Connection Type Operating Temperature Dimensions (Inches) Weight Certifications 20 ■ <1 nanosecond response time 200 A (10 x 1000 µs) 0 to 50 MHz < 0.1 dB at 50 MHz Silicon Breakover Devices w/Series PTC RJ-45 Jacks -40°C to +85°C 1.0H x 2.5W x 4.25L 3 oz UL 497A, CUL The Edco RJA and Edco RJD Series are intended for indoor use only and shall be employed on the equipment side of a listed primary telephone protector. Data/Signal Line Protection Edco RM-CAT6-16POE CAT6-16POE Channel Rackmount The Edco RM-CAT6-16POE is a 16-channel high-speed data line protector that utilizes a three-stage hybrid design technology. This unit addresses high-energy voltage transients that can damage expensive computer equipment. Ideal for Power-Over-Ethernet (POE) protection on network switches and hubs, the Edco RM-CAT6-16POE is easily mounted in close proximity to the protected equipment. Features Exceeds category 6 transmission values Low insertion loss Three stage hybrid Compact 1U rack size 1 year warranty Meets Power-Over-Ethernet (POE) requirements General Technical Specifications Operating Voltage 57 V Clamping Voltage 68 V Transmission Speed Frequency Range Operating Current 10 Mbps, 100 Mbps, 1,000 Mbps 0-250 MHz 0.15 A SPD Technology 2-Port Series SPD Technology GDT, SAD, W/Series PTC Modes of Protection Signal High-Low, Signal High-Ground, Signal Low-Ground Peak Surge Current 10 kA (8 x 20 µs) Insertion Loss <0.1 dB VSWR <1.2 Operating Humidity 0-95% Non-Condensing Operating Temperature Input Connection Type RJ-45 Output Connection Type RJ-45 Mounting Enclosure Type Dimensions Rackmount Painted Steel 1.75Hx19Wx6.3D Weight Warranty 5.5 lbs 1 Year -40°C to +85°C Edco CX-HFN Series High Frequency Coax Protector — N-Type The Edco CX-HFN surge protectors are designed to protect sensitive electronic equipment from damage due to excessive voltage or currents generated by lightning or static build-up. The Edco CX-HFN offers low signal loss at frequencies up to 4 gigahertz. The unit also has a replaceable protection cartridge (CX-RC). The Edco CX-HFN accommodates both bulkhead mount and stud mount. The input and output connections are interchangeable. Features Low signal loss 5 year warranty General Technical Specifications Ordering Information Operating Voltage 130 VDC Insertion Loss Clamping Voltage (DC Spark Over Voltage) 150 VDC SPD Technology Operating Current Peak Surge Current Connection Type 1A 10 kA (8 x 20 µs) Maximum Power 10 Watts Impedence 50 Ohms Frequency Range < 0.3 dB to 0.5 dB 2 to 3 GHz Operating Temperature Dimensions (Inches) Weight Gas Discharge Tube (GDT) CX-HFN-FF (Female–Female) CX-HFN-FM (Female-Male) N-Type -30°C to +85°C 1.25H x .875W x 2.5L 4 oz 0 to 4 GHz 21 Data/Signal Line Protection Edco SLAC Series AC Power/Signal The Edco SLAC Series suppressor was specifically designed to protect electronic instruments used by the water/wastewater industries. It combines hybrid AC power protection and signal line protection in a NEMA-4X polycarbonate case. The AC power suppressor can supply up to 1875 Watts and has a 15 Amp replaceable fuse to prevent overloading of the protective elements. A “Power ON” LED provides visual indication that power is applied to instruments. Signal line protection is accomplished by the Edco PC642 Series available in a variety of voltage clamps. Signal current can be monitored by reading the voltage across the 10 V, 1% resistors (TP1 & TP2 or TP3 & TP4). All leads going to the Edco SLAC board are terminated by quick disconnect or barrier block connectors to facilitate easy removal for service or replacement. Features Optional twist lock plug lightning & surge suppression for AC power and low-voltage signal lines Test jacks for signal line monitoring Series hybrid AC suppressor/filter Optional stainless steel or fiberglass enclosure Plug-in protection module “Power ON” indicator 5 year warranty 15 Amp replaceable fuse General Technical Specifications AC Power Standard Enclosure Optional Enclosure Technology NEMA-4X NEMA-4X Glass-Filled Polycarbonate Base Stainless Steel or Fiberglass Cover Molded in Clear Polycarbonate Continuous Hinge Knockouts for 1/2" and 3/4" hubs Nominal Outside Dimensions (Inches) H=10, W=8, D=4 Three-Stage Series Hybrid Input Voltage 120 VAC 50/60 Hz Output Current 15 Amps Max. Response Time <5 Nanoseconds Maximum Surge Current (8x20 µs) 10 kA Occurrences at 500 Amps Parameter Normal Mode (L-N) >50 Common Mode (L-G) (N-G) Bosses for 6 BZ x 3/8" Self-Tapping Screws Maximum Protection—Total Insulation Corrosion Resistant Resists Temperature of 248°F IEEE 587 CAT A Ring* 172 V 280 V Flammability Rating UL94-5V IEEE 587 CAT B Ring* 205 V 280 V IEEE 587 CAT B Impulse* 330 V 360 V Nominal Outside dimensions (Inches) H= 6.89, W=6.89, D=2.95 How to Specify the Appropriate Model *Measured from zero volts, 90° Phase angle General Technical Specifications Signal Line Technology Peak Surge Current Response Time Voltage Clamp (customer selected) Series Resistance 22 Series Hybrid 10 kA <1 Nanosecond 8–200 Volts 5 ⍀ (Typical) Ordering Information These blocks are for PC642 VoltageSelection if applicable. See PC 642 Datasheet for additional information. 0 3 6 is standard for 4-20 mA Signal Line. 70415-Catalog.qxd 6/4/09 12:40 PM Page 15 Transient Voltage Surge Suppression Data/Signal Line Protection IslaGuard® — Ordering Information ® IslaGuard High Exposure Model Number : I H 1 2 3 6 ® IslaGuard Medium Exposure Model Number : I M 1 2 4 IslaGuard® Low Exposure Model Number : I L 1 2 5 Edco SS64 & SS65 Series How to Specify the Appropriate Model All model numbers begin with a prefix (IH, IM, IL). Moving from left to right, choose correct configuration from each column for your application. Your completed model number should look similar to the example below: Wastewater/Industrial Applications Example Part Number: IH 120 L 200 X over-voltage transients with gas tube and silicon avalanche technology. In The Edco SS64 and Edco SS65 Series suppressors are designed for the water and wastewater industry. These multi-stage hybrid suppressors address addition, sneak and fault currents are mitigated with PTC devices which 1 Voltage Code Nominal Voltage Level 2 Phase Configuration Model Identification L–N L–L L–G 120 N/A 120 120 208 120 120 240 120 N/A 240 240 240 277 480 277 277 N/A 480 480 480 120 Phase Configuration Single Phase 2 Wires + Gnd (Line & Neutral) N Single Phase 2 Wires + Gnd (Line & Line) L Single (Split) Phase 3 Wires + Gnd Surge Capacity Per Phase (L-N + L-G) steel pipe nipples making them suitable for use in severe environments. The Model Identification Edco SS64 models protect a signal pair and the Edco SS65 models protect a 400 kA L–N 200 signal pair plus the cable shield (drain wire). L–G N–G 200 200 400 Model Identification S Three Phase Wye 4 Wires + Gnd Y Three Phase Delta 3 Wires + Gnd D Three Phase Delta Hi-Leg 4 Wires + Gnd H Three Phase Wye w/no Neutral 3 Wires + Gnd X 4 Surge Capacity (Medium Exposure) 160 kA Model Identification consist of solid-state resettable fuses. The units are encapsulated in stainless 200 kA Other voltages available, please consult factory. Surge Capacity Per Phase (L-N + L-G) 3 Surge Capacity (High Exposure) L–N L–G N–G 200 N/A 200 Features 200 kA L–N L–G N–G 100 100 100 Surge Capacity Per Phase (L-N + L-G) 100 kA 80 L–G 80 N–G L–N 80 100 kA 50 100-2 L–G 50 L–G N–G Model Identification 100 N–G 50 50 kA L–N L–G L–G N–G 100 N/A 100 100-2 N/A 100 25 25 ■ Protection for one pair (Two wires & shield on SS65) ■ Differential and common mode protection ■ Automatic recovery 6 Options Option Model Identification Rotary Disconnect R Surge Counter C General Technical Specifications NEMA 3R Enclosure 50 N–G Typical Applications < 1 Nanosecond Maximum Signal Voltage 28 V Max DC Clamping Level (L-G) 36 V ±l0% 3R NEMA 4 Enclosure 4 NEMA 4X Enclosure 4X 72 V ±l0% Peak Surge Current 100 ■ Sneak/fault current protection ■ 5 year warranty L–N DC Clamping Level (L-L) L–N ■ Encapsulated in stainless steel pipe nipples ■ Resettable fusing—PTCs Response Time L–N ■ Transient protection for low-voltage signal lines 200 100 kA 5 Surge Capacity (Low Exposure) 160 200-2 10 kA (8x20 µs) 25 Maximum let-thru Voltage: 200 kA 25-2 Line-to-Ground (10x700 µs) L–N L–G N–G 25 N/A 25 44 V @ 400 A Maximum let-thru Voltage: Line-to-Line (10x700 µs) 90 V @ 400 A Series Resistance (per conductor) 5 V (typical) Capacitance: (Zero Volts Bias) Recommended Connections (L-L) 600 pf typical (L-G) 1200 pf typical Number of Occurrences 400 @ 500 Amps (10x1000 µs) Caution: The hybrid design of this product includes series resistance. Do not place this product in service on any signal lines capable of supplying more than 150 milliamperes continuously. 6 23 Data/Signal Line Protection Edco CX Series CCTV & Data Applications/Coax The Edco CX06-M & Edco CX06-MI Surge Protective Devices (SPDs) implement three-stage hybrid technology. The SPDs address over-voltage transients with a primary Gas Discharge Tube (GDT), and secondary Silicon Avalanche Diode (SAD) components. Over-current protection, e.g. sneak and fault currents, are mitigated with solid-state resettable fuses — PTCs. The Edco CX06-M & Edco CX06-MI SPDs are designed in accordance with NFPA 780 (2004 edition) requirements, with up to 20 kA of surge current capability. The Edco CX06-MI model has an isolated ground and is recommended for use at the camera end. Features Sneak/fault current protection CX06-MI has an isolated ground Low insertion loss 5 year warranty Shielded case General Technical Specifications Ordering Information Operating Voltage 5 VDC Connection Type Clamping Voltage 6 VDC Operating Temperature 0.15 A Dimensions (Inches) Operating Current Peak Surge Current Frequency Range Insertion Loss SPD Technology 20 kA (8 x 20 µs) 0 to 20MHz < 0.1 dB at 20 MHz Weight BNC, 50/75 Ohm -40°C to +85°C Head End CX06-M Camera End CX06-MI M = 1.5H x 1W x 3.25L MI = 1.5H x 1W x 4L M = 2.3 oz MI = 3 oz Certifications UL 497B GDT, SAD, w/Series PTC Edco RM-CX06-16R Channel Rackmount The Edco RM-CX06-16R Surge Protective Device (SPD) is a 16 channel coax SPD implementing three-stage hybrid technology. The SPD addresses overvoltage transients with a primary Gas Discharge Tube (GDT), and secondary Silicon Avalanche Diode (SAD) components. Over-current protection, e.g., sneak and fault currents, are mitigated with new solid-state resettable fuses — PTCs. The Edco RM-CX06-16R SPD is designed in accordance with NFPA 780 (2004 edition) requirements, with up to 20 kA of surge current capability. Features Sneak/fault current protection 16 channel Low insertion loss 1 year warranty Shielded case General Technical Specifications Operating Voltage 5 VDC Frequency Range Clamping Voltage 6 VDC Insertion Loss Operating Current 0.15 A SPD Technology Peak Surge Current 24 20 kA (8 x 20 µs) Connection Type 0 to 100 MHz < 0.1 dB at 20 MHz GDT, SAD, w/Series PTC BNC, 50/75 Ohm Operating Temperature Dimensions (Inches) Weight Certifications -40°C to +85°C 1.75H x 19W x 2.0D (1U) 3.2 lbs UL 497B Technical Bulletins Technical Bulletins — High-Density Multiple Input Rack 25 Technical Bulletins Technical Bulletins — Surge Protection for the Water Industry 26 Technical Bulletins Technical Bulletins — Surge Protection for Power and Signal Lines 27 Headquarters Surge Protection 30 Charles Street Binghamton, NY 13901 T: 607-721-8840 T: 800-288-6169 F: 607-722-8713 E: contactsurge@emerson.com Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. EmersonNetworkPower. com AC Power Embedded Computing Outside Plant Racks & Integrated Cabinets Connectivity DC Power Embedded Power Monitoring Power Switching & Controls Precision Cooling Services Surge Protection Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. SL-30900 Rev.1 6/08 Printed in USA