Liquid Tight Strain Relief Fittings,
Committed
to Excellence!
Accessories
& Conduit
System
Our Service makes the difference!
UL746C
f1
Committed To Excellence!
Nylon Strain Relief
Table of Contents
w w w. s e a l c o nu s a . c o m
Nylon Strain Relief Fittings
Page
Nickel Plated Brass
3
4
5
6
7
8
9
9
10
11
12
Strain Relief Accessories
Page
Description
Nylon Fittings - Introduction
Straight Dome/Flex - PG/NPT Threads
Straight Dome/Flex - Metric Threads
Straight Dome/Flex - Elongated PG/Metric Threads
Straight Dome/Flex - Reduced/Enlarged Body - PG
90˚ Snap Elbow Dome/Flex - PG/NPT/Metric Threads
Clamp High Performance Pull-Out Resist. - PG & Metric
Romex® Fittings for Flat Cable
Multi-Hole Fittings - PG Threads
Multi-Hole Fittings - NPT Threads
Multi-Hole Fittings - Metric Threads
Romex® is a federally registered trademark of Southwire Company.
PVDF / Steel
Nickel Plated Brass Fittings
Page
Adapter,Reducer,Enlarger
Accessories
13
14
15
15
16
17
17
17
18
19
20
20
21
21
22
23
24
Conduit System
25
26
26
27
29
30
31
31
32
32
33
33
Description
Nickel Plated Brass Fittings - Introduction
Straight Dome/Flex - PG/NPT & Metric Threads
Mini WADI - Smallest Cable O.D. - PG & Metric
WADI XL - Largest Cable O.D. - Metric & BSPP
Straight Dome/Flex - Elongated PG/Metric Threads
90˚ Snap Elbow Dome - PG/Metric Threads & Flange
Clamping Extra Pull-out Resistance - PG/NPT/Metric
Clamp Extra Pull-out Resistance - Elongated PG/Metric
EMI/RFI Fittings: Product Features
EMI/RFI Fittings: Applications & Assembly
EMI/RFI: Standard - PG/NPT/Metric Threads
EMI/RFI: Standard - Elongated PG/Metric
EMI/RFI: Feed-Through - PG/NPT/Metric Threads
EMI/RFI: Feed-Through - Elongated PG/Metric
Multi-Hole Fittings - PG Threads
Multi-Hole Fittings - NPT Threads
Multi-Hole Fittings - Metric Threads
Locking Nuts: Nylon, Nickel Plated Brass
& Accessories Overview
Locking Nuts: EMI/RFI, Stainless Steel, Zinc Plated Steel
O-Rings & Seal Rings, Blind Plugs - Nylon
Dome Plugs - Nylon & Nickel Plated Brass
Hex Plugs - Black Nylon
Hex Plugs - Nickel Plated Brass
Hex Plugs - (303) Stainless Steel (INOX)
Cable Clamp (Low Profile) - Nickel Plated Brass
Deep Socket Wrenches - PG/NPT/Metric Sizes
Adapters, Reducers, Enlargers
Page
PVDF & Stainless Steel Fittings
Page
28
Description
34
34
35
36
37
38
39
Description
Thread Adapters - Nickel Plated Brass
Thread Adapters - Aluminum
Thread Adapters - Black Nylon & Polypropylene
Thread Reducers - Nickel Plated Brass (Hex & Round)
Thread Reducers - Black/Gray Nylon & Polypropylene
Thread Reducers - (303) Stainless Steel
Thread Enlargers - Black Nylon, NPB & Polypropylene
Conduit System
Page
40
40
40
41
42
43
43
44
44
Description
Conduit System - Introduction
Corrugated Conduit: Standard/Super Flex
Mounting Brackets
Push-In Fittings - PG/NPT/Metric
Turn-to-Seal Fittings - PG/NPT
Snapclic-DUO Fittings - Black Nylon - PG/Metric
Snapclic-DUO Fittings - Nickel Plated Brass - PG/Metric
Double-Seal Fittings - PG/Metric
Flange/Bulkhead Mount Fittings
Description
PVDF (FPM) High/Low Temp.- PG/NPT & Metric
Nickel Plated Brass w/ PVDF (FPM) - PG/NPT/Metric
Nickel Plated Brass w/ PVDF (FPM) - Elong. PG/Metric
(303 & 316L) Stainless Steel Fittings - PG/NPT & Metric
Why choose Sealcon as your cable management
partner?
Technical Information
Page
45
46
47
48
48
49
Description
Material Specifications & Temperature Ranges
NEMA Ratings
IP Ratings
Sizes & Dimensions for Sealcon Fittings
Torque Specifications & Pull-Test Rating
Thread Specifications (NPT, Metric, PG, BSPP)
Other Products / Index
Technical Information
Sealcon was founded in the fall of 1989 in Centennial,
Colorado. Our goal is to provide customers with the best
Other Products / Index
possible cable management solutions. We are proud to
Page
Description
represent Hummel, the leading German manufacturer of
Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands,
50
Circular Connectors (M16, M23, M27, M40, etc.)
Circular Connectors, Industrial Enclosures, Flexible Conduit,
51
Cable Glands for Ex-d Armored / Non-Armored Areas
and Other Cable & Wire Accessory Products. These products
52
Cable Glands for Ex / Hazardous Duty Proof Areas
meet RoHS, Deca BDE, Reach, UL, UR, CSA, VDE, CE, TÜV,
53
Industrial Enclosures (Plastic & Metal)
German Lloyd, PCT, SZU, Gost, Ex-e, Ex-d, IECEx, ATEX
54
P/N Index / Cross Reference
approvals. Hummel is ISO 9001 quality certified and has
continuously developed leading edge technology solutions.
We can usually ship your order within 24 hours from our central warehouse in Colorado. We replenish our inventory weekly and
can respond to changing demands quickly. This catalog is a condensed version of the Hummel master catalog, which is
available to our customers upon request. Our experienced staff will help to answer any technical questions and recommend the
correct samples for evaluation. Purchase orders, received before noon MST are often shipped the same day. Please give us
a call so we can help you with your application requirements. Sample your application or request your catalog today!
Daniel Spühler, CEO & President
2
Dimensions and specifications may be changed without prior notice.
Features & Benefits
w w w. s e a l c o nu s a . c o m
Features & Benefits:
•
•
•
•
•
UL/UR
CSA
VDE
CAGE
PATENT
E103997
074032
71339
0 UE114
4145075
(IS)
Intrinsically Safe:
Standard Nylon Blue
PVDF / Steel
•
•
NEMA 4x & 6 (IP 67 & 68) - Liquid Tight - Submersible to 300 ft!
IP 69K rated - Ideal in splash or hose down applications!
Patented Form Seal allows 150 PSIG (10 BAR) rating - Highest in Industry!
V0 flame rating according to UL 94 (Dome Nylon & PVDF Only) - Halogen &
Phosphorous Free - Non-Toxic!
UL f1 (746C) UV/Ozone stable Black Nylon - Ideal Outdoors (Solar/Photovoltaic)!
Concentric O-Ring Groove - meets most NEMA applications!
Safety Ratchet - Preventing Dome/Flex top from coming loose under vibration!
Large selection - Cable Range from .08” (2 mm) to 1.73” (44 mm)
Non-Corrosive - Resistant to salt water, weak acids, weak alkalis, alcohol, esters,
ketones, ether, gasoline, mineral, animal & vegetable oil
Durable - Rugged Construction
RoHS & Deca BDE - Environmentally Compliant to the newest standards
Nickel Plated Brass
•
•
•
•
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
Your One Stop Solution For All Cable & Wire Accessories!
ro d u c t
P
e
u
q
Uni
Pull-out Resistance & Cable Protection
Overlapping clamping splines apply a concentric pressure,
thereby preventing the form seal from being pulled out of
the fitting. This ensures pull-out protection without damage
to the cable.
Accessories
Adapter,Reducer,Enlarger
Submersible
The patented recess and high performance
form seal (grommet) guarantees NEMA 4x & 6
(IP 68 / IP 69K) at 150 PSIG (10 bar).
Rugged Construction
The self locking ACME thread prevents the dome or flex
nut from being pulled out under extreme lateral force.
UL746C
f1
ULf1 (746C) Photovoltaic Industry
All Black Nylon (Dome & Flex) Strain
Relief Fittings, Cord Grips, Cable
Glands are now made with UV /
Ozone Stable material.
Standard, Reduced and
Multi-Hole Inserts
Modularity: Increase and decrease
cable opening by swapping out
inserts to accommodate various
cable sizes & configurations.
Technical Information
Time Saving Installation
Simply push the cable through Strain Relief Fitting Tighten Dome or Flex Nut - Done! No disassembly of
the Fitting required!
Conduit System
Liquid Tight
Molded O-Ring groove for results in a liquid tight seal
between fitting and housing.
Other Products / Index
Flex Nut
Kinking and chafing of
the cable is eliminated in
dynamic applications.
Elbow Fittings
For Space and time saving installations: Open Elbow - Insert
cable - Snap close - Tighten Nut - Finished! Available with
Dome for static or Flex Nut for dynamic applications.
NOTE: Nylon Fittings do not come with an O-Ring.
Dimensions and specifications may be changed without prior notice.
3
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
Standard - PG & NPT Threads
Part Numbers
Thread
Type
& Size
Flex Fittings
Dimensions in Inches (mm)
Nickel Plated Brass
PVDF / Steel
Black
Gray
Black
Gray
Inches (mm)
CD07AA-BK
CD07AR-BK
CD09AA-BK
CD09AR-BK
CD11AA-BK
CD11AR-BK
CD13AA-BK
CD13AR-BK
CD16AA-BK
CD16AR-BK
CD21AA-BK
CD21AR-BK
CD29AA-BK
CD29AR-BK
CD36AA-BK
CD36AR-BK
CD42AA-BK
CD42AR-BK
CD48AA-BK
CD48AR-BK
CD07AA-GY
CD07AR-GY
CD09AA-GY
CD09AR-GY
CD11AA-GY
CD11AR-GY
CD13AA-GY
CD13AR-GY
CD16AA-GY
CD16AR-GY
CD21AA-GY
CD21AR-GY
CD29AA-GY
CD29AR-GY
CD36AA-GY
CD36AR-GY
CD42AA-GY
CD42AR-GY
CD48AA-GY
CD48AR-GY
CF07AA-BK
CF07AR-BK
CF09AA-BK
CF09AR-BK
CF11AA-BK
CF11AR-BK
CF13AA-BK
CF13AR-BK
CF16AA-BK
CF16AR-BK
CF21AA-BK
CF21AR-BK
-
CF07AA-GY
CF07AR-GY
CF09AA-GY
CF09AR-GY
CF11AA-GY
CF11AR-GY
CF13AA-GY
CF13AR-GY
CF16AA-GY
CF16AR-GY
CF21AA-GY
CF21AR-GY
-
See page 49
for thread
specs
.12 - .26 (3 - 6.5)
PG 7 /
1/4” NPT
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
PG 9
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
PG 11
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
PG 13 / 13.5
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
PG 16
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
PG 21
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
PG 29
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
PG 36
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
PG 42
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
PG 48
1.14 - 1.38 (29 - 35)
A
B
C
D
F1/F
Body
Length
(Dome)
Body
Length
(Flex)
Thread
Length
Wrench
Flats
.49 (12.5)
.83 (21)
2.13 (54)
.31 (8)
.59 (15)
.60 (15.2)
.87 (22)
2.48 (63)
.31 (8)
.75 (19)
.73 (18.5)
.98 (25)
3.07 (78)
.31 (8)
.87 (22)
.80 (20.3)
1.06 (27)
3.54 (90)
.35 (9)
.94 (24)
.89 (22.5)
1.10 (28)
3.94 (100)
.39 (10)
1.06 (27)
1.12 (28.4) 1.22 (31)
4.49 (114)
.43 (11)
1.30 (33)
1.47 (37.3) 1.54 (39)
-
.43 (11)
1.65 (42)
1.89 (48)
-
.51 (13)
2.09 (53)
2.13 (54.1) 1.93 (49)
-
.51 (13)
2.36 (60)
2.34 (59.4) 1.93 (49)
-
.55 (14)
2.56 (65)
.87 (22)
2.48 (63)
.59 (15)
.75 (19) /
.87 (22)
1.06 (27)
3.54 (90)
.51 (13)
.94 (24)
1.10 (28)
3.94 (100)
.51 (13)
1.06 (27)
1.22 (31)
4.49 (114)
.55 (14)
1.30 (33)
1.54 (39)
-
.75 (19)
1.65 (42)
1.54 (39)
-
.63 (16)
1.65 (42) /
1.81 (46)
1.89 (48)
-
.79 (20)
2.09 (53)
+ .01”
(+.25 mm)
1.85 (47)
CD09NA-BK CD09NA-GY CF09NA-BK CF09NA-GY
.16 - .31 (4 - 8)
3/8” NPT .68 (17.2)
CD09NR-BK CD09NR-GY CF09NR-BK CF09NR-GY
.08 - .24 (2 - 6)
CD13NA-BK CD13NA-GY CF13NA-BK CF13NA-GY .24 - .47 (6 - 12)
1/2” NPT .83 (21.1)
CD13NR-BK CD13NR-GY CF13NR-BK CF13NR-GY
.20 - .35 (5 - 9)
CD16NA-BK CD16NA-GY CF16NA-BK CF16NA-GY .39 - .55 (10 - 14)
1/2”-E NPT .83 (21.1)
CD16NR-BK CD16NR-GY CF16NR-BK CF16NR-GY .28 - .47 (7 - 12)
CD21NA-BK CD21NA-GY CF21NA-BK CF21NA-GY .51 - .71 (13 - 18)
3/4” NPT 1.05 (26.7)
CD21NR-BK CD21NR-GY CF21NR-BK CF21NR-GY .35 - .63 (9 - 16)
CD29NA-BK CD29NA-GY
.71 - .98 (18 - 25)
1” NPT
1.35 (34.3)
CD29NR-BK CD29NR-GY
.51 - .79 (13 - 20)
CD29LA-BK CD29LA-GY
.71 - .98 (18 - 25)
1-1/4” NPT 1.65 (41.9)
CD29LR-BK CD29LR-GY
.51 - .79 (13 - 20)
CD36NA-BK CD36NA-GY
.87 - 1.26 (22 - 32)
1-1/2” NPT 1.92 (48.7)
CD36NR-BK CD36NR-GY
.79 - 1.02 (20 - 26)
The straight PG 7 thread fits a 1/4” NPT female or 1/2”-20 UNF thread.
Technical Information
*Note: UL f1 rating applies to Black Nylon Fittings only.
Other Products / Index
Optional Locking Nuts, O-Rings
& Other Accessories starting on
Page 28 - 39.
4
(See Page 5)
Clearance
Hole
Accessories
Adapter,Reducer,Enlarger
Cable Range
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Dome Fittings
Conduit System
w w w. s e a l c o nu s a . c o m
*
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Dome Fittings also available
with the following approvals:
www.sealconex.com
w w w. s e a l c o nu s a . c o m
*
Part Numbers
Cable Range
Thread
Type
& Size
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Dome Fittings
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
Standard - Metric Threads
Flex Fittings
Dimensions in Inches (mm)
B
C
D
F1/F
Clearance
Body
Length
(Dome)
Body
Length
(Flex)
Thread
Length
Wrench
Flats
Hole
Gray
Inches (mm)
CF12MA-GY
CF12MR-GY
CF16MA-GY
CF16MR-GY
CF17MA-GY
CF17MR-GY
CF20MA-GY
CF20MR-GY
CF22MA-GY
CF22MR-GY
CF25MA-GY
CF25MR-GY
-
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
1.14 - 1.38 (29 - 35)
(+.25 mm)
M12 x 1.5
.47 (12)
.83 (21)
2.13 (54)
.31 (8)
.59 (15)
M16 x 1.5
.63 (16)
.87 (22)
2.48 (63)
.31 (8)
.75 (19)
M16 x 1.5
Enlarged
.63 (16)
.98 (25)
3.07 (78)
.31 (8)
.87 (22)
M20 x 1.5
.79 (20)
1.06 (27)
3.54 (90)
.35 (9)
.94 (24)
M20 x 1.5
Enlarged
.79 (20)
1.10 (28)
3.94 (100)
.35 (9)
1.06 (27)
M25 x 1.5
.98 (25)
1.22 (31)
4.49 (114)
.43 (11)
1.30 (33)
M32 x 1.5
1.26 (32)
1.54 (39)
-
.43 (11)
1.65 (42)
M40 x 1.5
1.57 (40)
1.89 (48)
-
.51 (13)
2.09 (53)
M50 x 1.5
1.97 (50)
1.93 (49)
-
.51 (13)
2.36 (60)
M63 x 1.5
2.48 (63)
1.93 (49)
-
.55 (14)
2.56 (65) /
2.68 (68)
*Note: UL f1 rating applies to Black Nylon Fittings only.
Adapter,Reducer,Enlarger
Black
CF12MA-BK
CF12MR-BK
CF16MA-BK
CF16MR-BK
CF17MA-BK
CF17MR-BK
CF20MA-BK
CF20MR-BK
CF22MA-BK
CF22MR-BK
CF25MA-BK
CF25MR-BK
-
Accessories
Gray
CD12MA-GY
CD12MR-GY
CD16MA-GY
CD16MR-GY
CD17MA-GY
CD17MR-GY
CD20MA-GY
CD20MR-GY
CD22MA-GY
CD22MR-GY
CD25MA-GY
CD25MR-GY
CD32MA-GY
CD32MR-GY
CD40MA-GY
CD40MR-GY
CD50MA-GY
CD50MR-GY
CD63MA-GY
CD63MR-GY
+ .01”
PVDF / Steel
Black
CD12MA-BK
CD12MR-BK
CD16MA-BK
CD16MR-BK
CD17MA-BK
CD17MR-BK
CD20MA-BK
CD20MR-BK
CD22MA-BK
CD22MR-BK
CD25MA-BK
CD25MR-BK
CD32MA-BK
CD32MR-BK
CD40MA-BK
CD40MR-BK
CD50MA-BK
CD50MR-BK
CD63MA-BK
CD63MR-BK
See page 49
for thread
specs
Nickel Plated Brass
A
Dome Fittings also available
with the following approvals:
Optional Locking Nuts, O-Rings
& Other Accessories starting on
Page 28 - 39.
www.sealconex.com
Conduit System
Technical Information
F1/F
Installs in either knockout or threaded holes.
Other Products / Index
F1/F
A
B
D
C
Suggested Clearance
Hole for Non-Threaded
Mounting
D
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
5
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
Elongated - PG & Metric Threads
*
*
w w w. s e a l c o nu s a . c o m
Part Numbers
Cable Range
Thread
Type
& Size
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Adapter,Reducer,Enlarger
Accessories
PVDF / Steel
Nickel Plated Brass
Dome Fittings
Flex Fittings
Black
Gray
Black
Gray
CD07CA-BK
CD07CR-BK
CD09CA-BK
CD09CR-BK
CD11CA-BK
CD11CR-BK
CD13CA-BK
CD13CR-BK
CD16CA-BK
CD16CR-BK
CD21CA-BK
CD21CR-BK
CD29CA-BK
CD29CR-BK
CD36CA-BK
CD36CR-BK
CD42CA-BK
CD42CR-BK
CD48CA-BK
CD48CR-BK
CD07CA-GY
CD07CR-GY
CD09CA-GY
CD09CR-GY
CD11CA-GY
CD11CR-GY
CD13CA-GY
CD13CR-GY
CD16CA-GY
CD16CR-GY
CD21CA-GY
CD21CR-GY
CD29CA-GY
CD29CR-GY
CD36CA-GY
CD36CR-GY
CD42CA-GY
CD42CR-GY
CD48CA-GY
CD48CR-GY
CF07CA-BK
CF07CR-BK
CF09CA-BK
CF09CR-BK
CF11CA-BK
CF11CR-BK
CF13CA-BK
CF13CR-BK
CF16CA-BK
CF16CR-BK
CF21CA-BK
CF21CR-BK
-
CF07CA-GY
CF07CR-GY
CF09CA-GY
CF09CR-GY
CF11CA-GY
CF11CR-GY
CF13CA-GY
CF13CR-GY
CF16CA-GY
CF16CR-GY
CF21CA-GY
CF21CR-GY
-
Dimensions in Inches (mm)
See page 49
for thread
specs
Inches (mm)
.12 - .26 (3 - 6.5)
PG 7
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
PG 9
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
PG 11
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
PG 13 / 13.5
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
PG 16
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
PG 21
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
PG 29
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
PG 36
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
PG 42
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
PG 48
1.14 - 1.38 (29 - 35)
A
B
C
D
F1/F
Clearance
Hole
Body
Length
(Dome)
Body
Length
(Flex)
Thread
Length
Wrench
Flats
+ .01”
(+.25 mm)
(Elongated)
.49 (12.5)
.83 (21)
2.13 (54)
.59 (15)
.59 (15)
.60 (15.2)
.87 (22)
2.48 (63)
.59 (15)
.75 (19)
.73 (18.5)
.98 (25)
3.07 (78)
.59 (15)
.87 (22)
.80 (20.3)
1.06 (27)
3.54 (90)
.59 (15)
.94 (24)
.89 (22.5)
1.10 (28)
3.94 (100)
.59 (15)
1.06 (27)
1.12 (28.4) 1.22 (31)
4.49 (114)
.59 (15)
1.30 (33)
1.47 (37.3) 1.54 (39)
-
.59 (15)
1.65 (42)
1.89 (48)
-
.71 (18)
2.09 (53)
2.13 (54.1) 1.93 (49)
-
.71 (18)
2.36 (60)
2.34 (59.4) 1.93 (49)
-
.71 (18)
2.56 (65)
1.85 (47)
*Note: UL f1 rating applies to Black Nylon Fittings only.
*Note: VDE rating applies to Metric Fittings only.
Dome Fittings also available
with the following approvals:
Optional Locking Nuts, O-Rings & Other
Accessories starting on Page 28 - 39.
F1/F
www.sealconex.com
Wall
F1/F
Wall
Conduit System
A
B
Other Products / Index
Technical Information
CD12DA-BK
CD12DR-BK
CD16DA-BK
CD16DR-BK
CD17DA-BK
CD17DR-BK
CD20DA-BK
CD20DR-BK
CD22DA-BK
CD22DR-BK
CD25DA-BK
CD25DR-BK
CD32DA-BK
CD32DR-BK
CD40DA-BK
CD40DR-BK
CD50DA-BK
CD50DR-BK
CD63DA-BK
CD63DR-BK
6
CD12DA-GY
CD12DR-GY
CD16DA-GY
CD16DR-GY
CD17DA-GY
CD17DR-GY
CD20DA-GY
CD20DR-GY
CD22DA-GY
CD22DR-GY
CD25DA-GY
CD25DR-GY
CD32DA-GY
CD32DR-GY
CD40DA-GY
CD40DR-GY
CD50DA-GY
CD50DR-GY
CD63DA-GY
CD63DR-GY
D
C
D
CF12DA-BK
CF12DR-BK
CF16DA-BK
CF16DR-BK
CF17DA-BK
CF17DR-BK
CF20DA-BK
CF20DR-BK
CF22DA-BK
CF22DR-BK
CF25DA-BK
CF25DR-BK
-
Suggested Clearance
Hole for Non-Threaded
Mounting
CF12DA-GY
CF12DR-GY
CF16DA-GY
CF16DR-GY
CF17DA-GY
CF17DR-GY
CF20DA-GY
CF20DR-GY
CF22DA-GY
CF22DR-GY
CF25DA-GY
CF25DR-GY
-
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
1.14 - 1.38 (29 - 35)
Elongated is recommended
where the Strain Relief has
to pass through a thick wall
or the application just needs
the Extra Thread Length.
M12 x 1.5
.47 (12)
.83 (21)
2.13 (54)
.59 (15)
.59 (15)
M16 x 1.5
.63 (16)
.87 (22)
2.48 (63)
.59 (15)
.75 (19)
M16 x 1.5
Enlarged
.63 (16)
.98 (25)
3.07 (78)
.59 (15)
.87 (22)
M20 x 1.5
.79 (20)
1.06 (27)
3.54 (90)
.59 (15)
.94 (24)
M20 x 1.5
Enlarged
.79 (20)
1.10 (28)
3.94 (100)
.59 (15)
1.06 (27)
M25 x 1.5
.98 (25)
1.22 (31)
4.49 (114)
.59 (15)
1.30 (33)
M32 x 1.5
1.26 (32)
1.54 (39)
-
.59 (15)
1.65 (42)
M40 x 1.5
1.57 (40)
1.89 (48)
-
.71 (18)
2.09 (53)
M50 x 1.5
1.97 (50)
1.93 (49)
-
.71 (18)
2.36 (60)
M63 x 1.5
2.48 (63)
1.93 (49)
-
.71 (18)
2.56 (65) /
2.68 (68)
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
Reduced Body - PG Threads
w w w. s e a l c o nu s a . c o m
*
Reduced Body Strain Relief Fittings
Part Numbers
Cable Range
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Flex Fittings
Dimensions in Inches (mm)
A
B
C
D
F
Clearance
Body
Length
(Dome)
Body
Length
(Flex)
Thread
Length
Wrench
Flats
Hole
Gray
Black
Gray
Inches (mm)
CD09BA-BK
CD09BR-BK
CD11BA-BK
CD11BR-BK
CD13BA-BK
CD13BR-BK
CD16BA-BK
CD16BR-BK
CD21BA-BK
CD21BR-BK
CD09BA-GY
CD09BR-GY
CD11BA-GY
CD11BR-GY
CD13BA-GY
CD13BR-GY
CD16BA-GY
CD16BR-GY
CD21BA-GY
CD21BR-GY
CF09BA-BK
CF09BR-BK
CF11BA-BK
CF11BR-BK
CF13BA-BK
CF13BR-BK
CF16BA-BK
CF16BR-BK
CF21BA-BK
CF21BR-BK
CF09BA-GY
CF09BR-GY
CF11BA-GY
CF11BR-GY
CF13BA-GY
CF13BR-GY
CF16BA-GY
CF16BR-GY
CF21BA-GY
CF21BR-GY
.11 - .26 (3-6.5)
.08 - .20 (2-5)
.16 - .31 (4-8)
.08 - .24 (2-6)
.20 - .39 (5-10)
.11 - .28 (3-7)
.24 - .47 (6-12)
.20 - .35 (5-9)
.39 - .55 (10-14)
.27 - .47 (7-12)
F
PG 9
.60 (15.2)
.83 (21)
2.13 (54)
.31 (8)
.75 (19)
PG 11
.73 (18.5)
.87 (22)
2.48 (63)
.31 (8)
.87 (22)
PG 13 /
13.5
.80 (20.3)
.98 (25)
3.07 (78)
.35 (9)
.94 (24)
PG 16
.89 (22.5)
1.06 (27)
3.54 (90)
.39 (10)
1.06 (27)
PG 21
1.12 (28.4) 1.10 (28)
3.94 (100)
.43 (11)
1.30 (33)
+ .01”
F
D
C
D
When your cable
diameter Decreases,
but your thread
remains the same.
Suggested Clearance
Hole for Non-Threaded
Mounting
Accessories
A
B
(+.25 mm)
PVDF / Steel
Black
See page 49
for thread
specs
Nickel Plated Brass
Dome Fittings
Thread
Type
& Size
Nylon Liquid Tight Strain Relief Fittings
Adapter,Reducer,Enlarger
Enlarged Body - PG Threads
*
Enlarged Body Strain Relief Fittings
Part Numbers
Cable Range
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Dome Fittings
Flex Fittings
Black
Gray
Inches (mm)
CD07GA-BK
CD07GR-BK
CD09GA-BK
CD09GR-BK
CD11GA-BK
CD11GR-BK
CD13GA-BK
CD13GR-BK
CD16GA-BK
CD16GR-BK
CD07GA-GY
CD07GR-GY
CD09GA-GY
CD09GR-GY
CD11GA-GY
CD11GR-GY
CD13GA-GY
CD13GR-GY
CD16GA-GY
CD16GR-GY
CF07GA-BK
CF07GR-BK
CF09GA-BK
CF09GR-BK
CF11GA-BK
CF11GR-BK
CF13GA-BK
CF13GR-BK
CF16GA-BK
CF16GR-BK
CF07GA-GY
CF07GR-GY
CF09GA-GY
CF09GR-GY
CF11GA-GY
CF11GR-GY
CF13GA-GY
CF13GR-GY
CF16GA-GY
CF16GR-GY
.16 - .31 (4-8)
.08 - .24 (2-6)
.20 - .39 (5-10)
.11 - .27 (3-7)
.24 - .47 (6-12)
.20 - .35 (5-9)
.39 - .55 (10-14)
.27 - .47 (7-12)
.51 - .71 (13-18)
.35 - .63 (9-16)
A
B
C
D
F
Clearance
Hole
Body
Length
(Dome)
Body
Length
(Flex)
Thread
Length
Wrench
Flats
+ .01”
(+.25 mm)
PG 7 /
1/4” NPT
.49 (12.5)
.87 (22)
2.48 (63)
.31 (8)
.75 (19)
PG 9
.60 (15.2)
.98 (25)
3.07 (78)
.31 (8)
.87 (22)
PG 11
.73 (18.5)
.94 (24)
3.54 (90)
.31 (8)
.94 (24)
PG 13 / 13.5 .80 (20.3)
1.10 (28)
3.94 (100)
.35 (9)
1.06 (27)
1.22 (31)
4.49 (114)
.39 (10)
1.30 (33)
PG 16
.89 (22.5)
Technical Information
Gray
See page 49
for thread
specs
Dimensions in Inches (mm)
Conduit System
Black
Thread
Type
& Size
*Note: UL f1 rating applies to Black Nylon Fittings only.
Optional Locking Nuts, O-Rings & Other
Accessories starting on Page 28 - 39.
www.sealconex.com
When your cable diameter
Increases, but your thread
remains the same.
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Other Products / Index
Dome Fittings also available
with the following approvals:
7
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
90º Snap Elbow - PG/NPT/Metric Threads
*
w w w. s e a l c o nu s a . c o m
Part Numbers
Cable Range
Thread
Type
& Size
Conduit System
Adapter,Reducer,Enlarger
Accessories
PVDF / Steel
Nickel Plated Brass
Dome Fittings
A
B
C
D
E
F
Body
Length
(Dome)
Body
Length
(Flex)
Height
Thread
Length
Wrench
Flats
1.77 (45)
3.35 (85)
.91 (23)
.31 (8)
.75 (19)
1.97 (50)
4.05 (103)
1.06 (27)
.31 (8)
.87 (22)
2.24 (57)
4.69 (119)
1.20 (30.5)
.35 (9)
.94 (24)
2.32 (59)
5.12 (130)
1.28 (32.5)
.39 (10)
1.06 (27)
2.87 (73)
6.14 (156)
1.57 (40)
.43 (11)
1.30 (33)
3.58 (91)
-
2.03 (51.5)
.43 (11)
1.65 (42)
.68 (17.2)
1.77 (45)
3.35 (85)
.91 (23)
.59 (15)
.75 (19)
.83 (21.1)
2.24 (57)
4.69 (119)
1.20 (30.5)
.51 (13)
.94 (24)
.83 (21.1)
2.32 (59)
5.12 (130)
1.28 (32.5)
.51 (13)
1.06 (27)
1.05 (26.7)
2.87 (73)
6.14 (156)
1.57 (40)
.51 (13)
1.30 (33)
1.35 (34.3)
3.58 (91)
-
2.03 (51.5)
.75 (19)
1.65 (42)
M16 x 1.5
.63 (16)
1.77 (45)
3.35 (85)
.91 (23)
.31 (8)
.75 (19)
M20 x 1.5
.79 (20)
2.24 (57)
4.68 (119)
1.20 (30.5)
.35 (9)
.94 (24)
M25 x 1.5
.98 (25)
2.87 (73)
6.14 (156)
1.57 (40)
.43 (11)
1.30 (33)
M32 x 1.5
1.26 (32)
3.58 (91)
-
2.03 (51.5)
.43 (11)
1.65 (42)
Flex Fittings
Inches (mm)
Dimensions in Inches (mm)
Clearance
Hole
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
See page 49
for thread
specs
+ .01”
(+.25 mm)
Black
ED09AA-BK
ED09AR-BK
ED11AA-BK
ED11AR-BK
ED13AA-BK
ED13AR-BK
ED16AA-BK
ED16AR-BK
ED21AA-BK
ED21AR-BK
ED29AA-BK
ED29AR-BK
Gray
ED09AA-GY
ED09AR-GY
ED11AA-GY
ED11AR-GY
ED13AA-GY
ED13AR-GY
ED16AA-GY
ED16AR-GY
ED21AA-GY
ED21AR-GY
ED29AA-GY
ED29AR-GY
Black
EF09AA-BK
EF09AR-BK
EF11AA-BK
EF11AR-BK
EF13AA-BK
EF13AR-BK
EF16AA-BK
EF16AR-BK
EF21AA-BK
EF21AR-BK
-
Gray
EF09AA-GY
EF09AR-GY
EF11AA-GY
EF11AR-GY
EF13AA-GY
EF13AR-GY
EF16AA-GY
EF16AR-GY
EF21AA-GY
EF21AR-GY
-
.16 - .31 (4-8)
PG 9
.60 (15.2)
.08 - .24 (2-6)
.20 - .39 (5-10)
PG 11
.73 (18.5)
.11 - .28 (3-7)
.24 - .47 (6-12)
PG 13 / 13.5 .80 (20.3)
.20 - .35 (5-9)
.39 - .55 (10-14)
PG 16
.89 (22.5)
.27 - .47 (7-12)
.51 - .71 (13-18)
PG 21
1.12 (28.4)
.35 - .63 (9-16)
.71 - .98 (18-25)
1.47 (37.3)
PG 29
.51 - .79 (13-20)
ED09NA-BK
ED09NR-BK
ED13NA-BK
ED13NR-BK
ED16NA-BK
ED16NR-BK
ED21NA-BK
ED21NR-BK
ED29NA-BK
ED29NR-BK
ED09NA-GY
ED09NR-GY
ED13NA-GY
ED13NR-GY
ED16NA-GY
ED16NR-GY
ED21NA-GY
ED21NR-GY
ED29NA-GY
ED29NR-GY
EF09NA-BK
EF09NR-BK
EF13NA-BK
EF13NR-BK
EF16NA-BK
EF16NR-BK
EF21NA-BK
EF21NR-BK
-
EF09NA-GY
EF09NR-GY
EF13NA-GY
EF13NR-GY
EF16NA-GY
EF16NR-GY
EF21NA-GY
EF21NR-GY
-
.16 - .31 (4-8)
3/8” NPT
.08 - .24 (2-6)
.24 - .47 (6-12)
1/2” NPT
.20 - .35 (5-9)
.39 - .55 (10-14)
1/2”-E NPT
.27 - .47 (7-12)
.51 - .71 (13-18)
3/4” NPT
.35 - .63 (9-16)
.71 - .98 (18-25)
1” NPT
.51 - .79 (13-20)
ED16MA-BK
ED16MR-BK
ED20MA-BK
ED20MR-BK
ED25MA-BK
ED25MR-BK
ED32MA-BK
ED32MR-BK
ED16MA-GY
ED16MR-GY
ED20MA-GY
ED20MR-GY
ED25MA-GY
ED25MR-GY
ED32MA-GY
ED32MR-GY
EF16MA-BK
EF16MR-BK
EF20MA-BK
EF20MR-BK
EF25MA-BK
EF25MR-BK
-
EF16MA-GY .16 - .31 (4-8)
EF16MR-GY .08 - .24 (2-6)
EF20MA-GY .24 - .47 (6-12)
EF20MR-GY .20 - .35 (5-9)
EF25MA-GY .51 - .71 (13-18)
EF25MR-GY .35 - .63 (9-16)
.71 - .98 (18-25)
.51 - .79 (13-20)
*Note: VDE rating applies to Metric Dome Fittings.
Liquid Tight Elbow Strain Relief Fitting for space and time saving applications.
Technical Information
Swivel Elbow also available! Visit
www.sealconusa.com for product
information. (PG Thread)
Optional Locking Nuts & Other
Accessories starting on Page 28 - 39.
B
C
A
Suggested Clearance
Hole for Non-Threaded
Mounting
Other Products / Index
O-Ring (PG &
Metric Threads
Only.)
8
Protection O-Ring:
IP68, Buna-N.
D
D
E
Wrench
Flat (F)
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
E
Wrench Flat (F)
Cable Range
- 4 °F to 158 °F
(- 20 °C to 70 °C)
See page 49
for thread
specs
CD16MA-CP
CD20MA-CP
CD25MA-CP
CD32MA-CP
CD40MA-CP
CD50MA-CP
.16 - .31 (4 - 8)
.24 - .47 (6 - 12)
.51 - .71 (13 - 18)
.71 - .98 (18 - 25)
.87 - 1.26 (22 - 32)
1.26 - 1.50 (32 - 38)
CD63MA-CP
1.46 - 1.73 (37 - 44)
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
B
D
F1/F
Body
Length
Thread
Length
Wrench
Flats
.60 (15.2)
.73 (18.5)
.80 (20.3)
.89 (22.5)
1.12 (28.4)
1.47 (37.3)
1.85 (47)
2.13 (54.1)
2.34 (59.4)
1.14 (29)
1.28 (32.5)
1.40 (35.5)
1.48 (37.5)
1.61 (41)
1.93 (49)
2.28 (58)
2.42 (61.5)
2.44 (62)
.59 (15)
.59 (15)
.59 (15)
.39 (10)
.43 (11)
.43 (11)
.51 (13)
.51 (13)
.55 (14)
.75 (19)
.87 (22)
.94 (24)
1.06 (27)
1.30 (33)
1.65 (42)
2.09 (53)
2.36 (60)
2.56 (65)
.63 (16)
.79 (20)
.98 (25)
1.26 (32)
1.57 (40)
1.97 (50)
1.14 (29)
1.40 (35.5)
1.61 (41)
1.93 (49)
2.28 (58)
2.42 (61.5)
.59 (15)
.59 (15)
.43 (11)
.43 (11)
.51 (13)
.51 (13)
.75 (19)
.94 (24)
1.30 (33)
1.65 (42)
2.09 (53)
2.36 (60)
2.56 (65) /
2.68 (68)
+ .01”
(+.25 mm)
2.48 (63)
2.44 (62)
.55 (14)
F1/F
Screw
Clamp
Suggested Clearance
Hole for Non-Threaded
Mounting
A
*Includes Buna-N O-Ring
Strain Relief Fittings with Inserts for
Flat Cables and ASI-BUS Cables.
These form seals are also available
with Strain Relief Fittings made
of other materials. (Nickel Plated
Brass, Stainless Steel, etc.)
Dome Fittings also available
with the following approvals:
Suggested Clearance
Hole for Non-Threaded
Mounting
F1/F
D
Thread
Type
& Size
Slot Size
See page 49
for thread
specs
Dimensions in Inches (mm)
A
B
D
F1/F
Clearance
Hole
Body
Length
Thread
Length
Wrench
Flats
.94 (24)
+ .01”
(+.25 mm)
Black
Gray
CD13AS-A1*
CD16AS-01
CD16AS-03
CD16AS-05
CD21AS-01
CD21AS-03
CD16AS-02
CD16AS-04
CD16AS-06
CD21AS-02
CD21AS-04
PG 13 / 13.5 .17 x .41 (4.2 x 10.4) .80 (20.3) 1.06 (27) .35 (9)
.24 x .55 (6 x 14)
PG 16
.20 x .45 (5 x 11.5) .89 (22.5) 1.10 (28) .39 (10)
.28 x .47 (7 x 12)
.24 x .55 (6 x 14)
PG 21
1.12 (28.4) 1.22 (31) .43 (11)
.28 x .55 (7 x 14)
CD13NS-A1*
CD16NS-01
CD16NS-03
CD16NS-05
CD21NS-01
CD21NS-03
CD29NS-01
CD16NS-02
CD16NS-04
CD16NS-06
CD21NS-02
CD21NS-04
-
.17 x .41 (4.2 x 10.4)
.24 x .55 (6 x 14)
1/2”-E NPT
.20 x .45 (5 x 11.5)
.28 x .47 (7 x 12)
.24 x .55 (6 x 14)
3/4” NPT
.28 x .55 (7 x 14)
1” NPT
.31 x .87 (8 x 22)
CD20MS-A1*
CD20MS-01
CD20MS-03
CD20MS-05
CD25MS-01
CD25MS-03
CD20MS-02
CD20MS-04
CD20MS-06
CD25MS-02
CD25MS-04
.17 x .41 (4.2 x 10.4)
.24 x .55 (6 x 14)
M20 x 1.5 .20 x .45 (5 x 11.5)
.28 x .47 (7 x 12)
.24 x .55 (6 x 14)
M25 x 1.5
.28 x .55 (7 x 14)
UL pertains to the standard body, not including FLAKA (Romex®) Insert.
FLAKA (for Romex style cable) HSK-K 1/2”-E are UL listed.
To meet UL, only Romex style cable (flat top and bottom) can be used with
this style Strain Relief (no Zip Cable, no Ribbon cable, etc.)
1.06 (27)
1.30 (33)
.83 (21.1) 1.06 (27) .51 (13)
.94 (24)
.83 (21.1) 1.10 (28) .51 (13)
1.06 (27)
1.05 (26.7) 1.22 (31) .55 (14)
1.30 (33)
1.35 (34.3) 1.54 (39) .75 (19)
1.65 (42)
.79 (20)
1.06 (27)
.35 (9)
.94 (24)
.79 (20)
1.10 (28)
.35 (9)
1.06 (27)
.98 (25)
1.22 (31) .43 (11)
1.30 (33)
Romex fittings are also available in PG 29, PG 36, PG 42, PG 48.
Romex® is a federally registered trademark of Southwire Company.
*Note: UL f1 rating applies to Black Nylon Fittings only.
* Insert for ASI-BUS Cables
For Material Specifications and Approval Information, please refer to page 45.
®
Dimensions and specifications may be changed without prior notice.
9
Other Products / Index
B
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Technical Information
ASI-BUS
Cable Insert
Romex® Strain Relief Fittings for Flat Cable
Conduit System
www.sealconex.com
Adapter,Reducer,Enlarger
Nylon Liquid Tight Strain Relief Fittings
ROMEX® - PG/NPT/Metric Threads
*
A
D
B
Accessories
.16 - .31 (4 - 8)
PG 9
.24 - .39 (6 - 10)
PG 11
.24 - .47 (6 -12)
PG 13 / 13.5
.39 - .55 (10 -14)
PG 16
.51 - .71 (13 - 18)
PG 21
.71 - .98 (18 - 25)
PG 29
.87 - 1.26 (22 - 32)
PG 36
1.26 - 1.50 (32 - 38)
PG 42
1.46 - 1.73 (37 - 44)
PG 48
A
Clearance
Hole
PVDF / Steel
CD09AA-CP
CD11AA-CP
CD13AA-CP
CD16AA-CP
CD21AA-CP
CD29AA-CP
CD36AA-CP
CD42AA-CP
CD48AA-CP
Dimensions in Inches (mm)
Nickel Plated Brass
Inches (mm)
Thread Type
& Size
w w w. s e a l c o nu s a . c o m
Liquid Tight Strain Relief Fitting
with Anodized Aluminum Clamp for
Extra Pull-out Resistance!
Extra Pull-Out Resistant Strain Relief Fittings with Clamp
Part Numbers
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
Clamp High Performance - PG & Metric Threads
Nylon Strain Relief
Nickel Plated Brass
PVDF / Steel
Accessories
Adapter,Reducer,Enlarger
Conduit System
Technical Information
Nylon Liquid Tight Strain Relief Fittings
Multi-Hole - PG Threads
*
w w w. s e a l c o nu s a . c o m
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Black
Gray
Thread
Type
& Size
Dimensions in Inches (mm)
See page
49 for
thread
specs
mm
PG 7 /
CD07AP-BK CD07AP-GY
1/4” NPT
CD09A1-BK
CD09A2-BK
CD09A3-BK
CD09A4-BK
CD09A5-BK
CD09A6-BK
CD09A7-BK
CD09A8-BK
CD09A9-BK
CD09AP-BK
CD09A1-GY
CD09A2-GY
CD09A3-GY
CD09A4-GY
CD09A5-GY
CD09A6-GY
CD09A7-GY
CD09A8-GY
CD09A9-GY
CD09AP-GY
CD11A1-BK
CD11A2-BK
CD11A3-BK
CD11A4-BK
CD11A5-BK
CD11AP-BK
CD11A1-GY
CD11A2-GY
CD11A3-GY
CD11A4-GY
CD11A5-GY
CD11AP-GY
CD13A1-BK
CD13A2-BK
CD13A3-BK
CD13A4-BK
CD13A5-BK
CD13A6-BK
CD13A7-BK
CD13A8-BK
CD13A9-BK
CD13AP-BK
CD13A1-GY
CD13A2-GY
CD13A3-GY
CD13A4-GY
CD13A5-GY PG 13 /
13.5
CD13A6-GY
CD13A7-GY
CD13A8-GY
CD13A9-GY
CD13AP-GY
CD16A1-BK
CD16A2-BK
CD16A3-BK
CD16A4-BK
CD16A5-BK
CD16A6-BK
CD16A7-BK
CD16A8-BK
CD16A9-BK
CD16A0-BK
CD16AP-BK
CD16A1-GY
CD16A2-GY
CD16A3-GY
CD16A4-GY
CD16A5-GY
CD16A6-GY
CD16A7-GY
CD16A8-GY
CD16A9-GY
CD16A0-GY
CD16AP-GY
PG 9
PG 11
Diameter
of Holes
No. of
Holes
Part
Numbers
of
Inserts
only
Inches
Part Numbers
-40ºF to 212ºF (-40ºC to 100ºC)
Black
Gray
CD21A1-BK
CD21A2-BK
CD21A3-BK
CD21A4-BK
CD21A5-BK
CD21A6-BK
CD21A7-BK
CD21A8-BK
CD21A9-BK
CD21AP-BK
CD21A1-GY
CD21A2-GY
CD21A3-GY
CD21A4-GY
CD21A5-GY
CD21A6-GY
CD21A7-GY
CD21A8-GY
CD21A9-GY
CD21AP-GY
Thread
Type
& Size
Dimensions in Inches (mm)
Diameter
of Holes
No. of
Holes
See page
49 for
thread
specs
4
3
2
4
1
4
3
4/1
2
mm Inches
6.0
.24
7.0
.28
8.0
.31
5.0
.20
8.0
.31
5.2
.20
5.2
.20
5.2/3.7 .20/.15
7.4
.29
Solid Insert
1.089.2100.19
1.089.2101.19
1.089.2102.19
1.089.2103.19
1.089.2104.19
1.089.2105.19
1.089.2106.19
1.089.2107.19
1.089.2108.19
1.089.2199.19
Solid Insert
1.089.0799.19
4
2
5
2
10
6
3
4
4
1.4
.06
3.0
.12
1.6
.06
1.7
.07
1.4
.06
1.4
.06
1.7
.07
1.7
.07
2.3
.09
Solid Insert
2
3
2
3
4
3.0
.12
3.0
.12
4.0
.16
1.5
.06
2.8
.11
Solid Insert
3
6
3
2
3
2
2
2
2
2.0
.08
3.0
.12
4.0
.16
5.0
.20
3.0
.12
5.2
.20
3.8
.15
4.2
.17
2.5
.10
Solid Insert
1.089.0900.19
1.089.0901.19
PG 21
1.089.0902.19
1.089.0903.19
1.089.0904.19
1.089.0905.19
1.089.0906.19
1.089.0907.19
6
6.5
.26 1.089.2900.19
1.089.0908.19 CD29A1-BK CD29A1-GY
4
9.0
.35 1.089.2901.19
1.089.0999.19 CD29A2-BK CD29A2-GY
CD29A3-BK CD29A3-GY PG 29
4
9.5
.37 1.089.2902.19
1.089.1100.19 CD29A9-BK CD29A9-GY
2
11.0
.43 1.089.2908.19
1.089.1101.19 CD29AP-BK CD29AP-GY
Solid Insert
1.089.2999.19
1.089.1102.19
5
9.0
.35 1.089.3600.19
1.089.1103.19 CD36A1-BK CD36A1-GY
CD36A2-BK
CD36A2-GY
7
9.0
.35 1.089.3601.19
1.089.1104.19
CD36A3-BK
CD36A3-GY
PG
36
6
8.0
.31 1.089.3602.19
1.089.1199.19
CD36A4-BK CD36A4-GY
2
15.0
.59 1.089.3603.19
1.089.1300.19 CD36AP-BK CD36AP-GY
Solid Insert
1.089.3699.19
1.089.1301.19
3
14.0
.55 1.089.4203.19
1.089.1302.19 CD42A1-BK CD42A1-GY PG 42
CD42AP-BK
CD42AP-GY
Solid
Insert
1.089.4299.19
1.089.1303.19
1.089.1304.19 CD48A1-BK CD48A1-GY
8
10.0
.39 1.089.4800.19
1.089.1305.19 CD48A2-BK CD48A2-GY
6
12.0
.47 1.089.4801.19
1.089.1306.19 CD48A3-BK CD48A3-GY PG 48
3
18.0
.71 1.089.4802.19
1.089.1307.19 CD48AP-BK CD48AP-GY
Solid Insert
1.089.4899.19
1.089.1308.19 For Strain Relief Fitting specifications and dimensions see Page 4.
1.089.1399.19
1.089.1600.19 Fittings with Multi-Hole Inserts are also available with Flex Nut.
3
3
4
5
6
2
PG 16
3
6
4
* 6
3.0
.12
4.0
.16 1.089.1601.19 To order, substitute “CF” for “CD”
4.0
.16 1.089.1602.19 (e.g. CD09A1-BK becomes CF09A1-BK)
4.0
.16 1.089.1603.19
4.0
.16 1.089.1604.19
6.0
.24 1.089.1605.19
5.6
.22 1.089.1606.19
3.0
.12 1.089.1607.19
Dome Fittings also available
with the following approvals:
3.0
.12 *1.089.1610.19
3.8
.15 1.089.1609.19
Solid Insert
1.089.1699.19
www.sealconex.com
*Note: UL f1 rating applies to Black Nylon Fittings only.
*Note: This Insert has slotted holes.
FPM
Silicone
Other Products / Index
Part
Numbers
of
Inserts
only
Multi-Hole Inserts are available in Silicone and FPM upon request.
10 For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Optional Locking Nuts, O-Rings & Other
Accessories starting on Page 28 - 39.
*
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Gray
CD07AP-BK
CD07AP-GY
Dimensions in Inches (mm)
No. of
holes
See page
49 for
thread
specs
Diameter
of Holes
mm
PG7 /
1/4” NPT
Part
Numbers
of
Inserts
only
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Black
Inches
Solid Insert
1.089.0799.19
1.089.0900.19
1.089.0901.19
1.089.0902.19
1.089.0903.19
1.089.0904.19
1.089.0905.19
1.089.0906.19
1.089.0907.19
1.089.0908.19
1.089.0999.19
CD13N1-BK
CD13N2-BK
CD13N3-BK
CD13N4-BK
CD13N5-BK
CD13N6-BK
CD13N7-BK
CD13N8-BK
CD13N9-BK
CD13NP-BK
CD13N1-GY
CD13N2-GY
CD13N3-GY
CD13N4-GY
CD13N5-GY
1/2” NPT
CD13N6-GY
CD13N7-GY
CD13N8-GY
CD13N9-GY
CD13NP-GY
3
6
3
2
3
2
2
2
2
2.0
.08
3.0
.12
4.0
.16
5.0
.20
3.0
.12
5.2
.20
3.8
.15
4.2
.17
2.5
.10
Solid Insert
1.089.1300.19
1.089.1301.19
1.089.1302.19
1.089.1303.19
1.089.1304.19
1.089.1305.19
1.089.1306.19
1.089.1307.19
1.089.1308.19
1.089.1399.19
CD16N1-BK
CD16N2-BK
CD16N3-BK
CD16N4-BK
CD16N5-BK
CD16N6-BK
CD16N7-BK
CD16N8-BK
CD16N9-BK
CD16N0-BK
CD16NP-BK
CD16N1-GY
CD16N2-GY
CD16N3-GY
CD16N4-GY
CD16N5-GY
1/2” NPT
CD16N6-GY
(Enlarged)
CD16N7-GY
CD16N8-GY
CD16N9-GY
CD16N0-GY
CD16NP-GY
3
3
4
5
6
2
3
6
4
6
3.0
.12
4.0
.16
4.0
.16
4.0
.16
4.0
.16
6.0
.24
5.6
.22
3.0
.12
3.0
.12
3.8
.15
Solid Insert
Part
Numbers
of
Inserts
only
mm Inches
6.0
.24
7.0
.28
8.0
.31
5.0
.20
8.0
.31
5.2
.20
5.2
.20
5.2/3.7 .20/.15
7.4
.29
Solid Insert
1.089.2100.19
1.089.2101.19
1.089.2102.19
1.089.2103.19
1.089.2104.19
1.089.2105.19
1.089.2106.19
1.089.2107.19
1.089.2108.19
1.089.2199.19
CD21N1-BK
CD21N2-BK
CD21N3-BK
CD21N4-BK
CD21N5-BK
CD21N6-BK
CD21N7-BK
CD21N8-BK
CD21N9-BK
CD21NP-BK
CD21N1-GY
CD21N2-GY
CD21N3-GY
CD21N4-GY
CD21N5-GY
3/4” NPT
CD21N6-GY
CD21N7-GY
CD21N8-GY
CD21N9-GY
CD21NP-GY
4
3
2
4
1
4
3
4/1
2
CD29N1-BK
CD29N2-BK
CD29N3-BK
CD29N9-BK
CD29NP-BK
CD29N1-GY
CD29N2-GY
CD29N3-GY 1” NPT
CD29N9-GY
CD29NP-GY
6
4
4
2
6.5
.26
9.0
.35
9.5
.37
11
.43
Solid Insert
1.089.2900.19
1.089.2901.19
1.089.2902.19
1.089.2908.19
1.089.2999.19
CD29L1-BK
CD29L2-BK
CD29L3-BK
CD29LP-BK
CD29L1-GY
CD29L2-GY
CD29L3-GY
CD29LP-GY
6
4
4
6.5
.26
9.0
.35
9.5
.37
Solid Insert
1.089.2900.19
1.089.2901.19
1.089.2902.19
1.089.2999.19
1-1/4”
NPT
CD36N1-BK CD36N1-GY
5
9.0
.35 1.089.3600.19
CD36N2-BK CD36N2-GY
7
9.0
.35 1.089.3601.19
1-1/2”
CD36N3-BK CD36N3-GY
6
8.0
.31 1.089.3602.19
NPT
CD36N4-BK
CD36N4-GY
2
15.0
.59 1.089.3603.19
1.089.1600.19
CD36NP-BK
CD36NP-GY
Solid
Insert
1.089.3699.19
1.089.1601.19
For
Strain
Relief
Fitting
specifications
and
dimensions
see
Page
4.
1.089.1602.19
1.089.1603.19
1.089.1604.19
1.089.1605.19
New UV & Ozone Stable Black TPE
1.089.1606.19
Membrane available (60 Different
1.089.1607.19
Configurations). Call for details.
1.089.1610.19*
1.089.1609.19
1.089.1699.19
*Note: UL f1 rating applies to Black Nylon Fittings only.
*Note: This Insert has slotted holes.
Technical Information
Fittings with Multi-Hole Inserts are also available with Flex Nut.
• To order, substitute “CF” for “CD” (e.g. CD09N1-BK becomes CF09N1-BK)
Custom Solutions!
•
•
Any special insert hole or profile configuration is available for a minimum order of 1,000 pieces.
No Charge Manufacturing Fee - In 12-14 weeks or a one time Expedite Fee reducing manufacturing to 6-8 weeks.
Dome Fittings also available
with the following approvals:
For small quantities we suggest drilling or machining the inserts yourself, following these guidelines:
We suggest drilling the frozen solid insert.
www.sealconex.com
Drill holes by using a standard high-speed steel drill bit of the proper size at approx. 2500 RPM.
Drill holes with insert installed in Strain Relief Fitting as a fixture.
Keep a minimum distance of 1 mm (.04 in) between holes.
The outside holes can be located right against the lip of the strain relief body, as sufficient insert material remains between the hole and the body wall
due to the design of the cord grip.
Other Products / Index
•
•
•
•
•
Important:
Design Parameters: Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed
.04” (1 mm). The Multi Cable fittings will meet NEMA 4x = IP65 if the design parameters are complied with.
To verify a submersible NEMA 6= IP68 application, the final assembly of cables and fittings must be tested by the customer or submitted at the customer’s
expense to an independent test lab.
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Conduit System
1.4
.06
3.0
.12
1.6
.06
1.7
.07
1.4
.06
1.4
.06
1.7
.07
1.7
.07
2.3
.09
Solid Insert
See page
49 for
thread
specs
Diameter
of Holes
Adapter,Reducer,Enlarger
4
2
5
2
10
6
3
4
4
No. of
Holes
Accessories
CD09N1-GY
CD09N2-GY
CD09N3-GY
CD09N4-GY
CD09N5-GY
3/8” NPT
CD09N6-GY
CD09N7-GY
CD09N8-GY
CD09N9-GY
CD09NP-GY
Dimensions in Inches (mm)
PVDF / Steel
CD09N1-BK
CD09N2-BK
CD09N3-BK
CD09N4-BK
CD09N5-BK
CD09N6-BK
CD09N7-BK
CD09N8-BK
CD09N9-BK
CD09NP-BK
Gray
Thread
Type
& Size
Nickel Plated Brass
Black
Thread
Type
& Size
w w w. s e a l c o nu s a . c o m
Nylon Strain Relief
Nylon Liquid Tight Strain Relief Fittings
Multi-Hole - NPT Threads
11
Nylon Strain Relief
Nickel Plated Brass
PVDF / Steel
Accessories
Adapter,Reducer,Enlarger
Conduit System
Technical Information
Other Products / Index
Nylon Liquid Tight Strain Relief Fittings
Multi-Hole - Metric Threads
*
w w w. s e a l c o nu s a . c o m
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Black
Gray
Thread
Type
& Size
Dimensions in Inches (mm)
No. of
Holes
See page
49 for thread
specs
Diameter
of Holes
Part
Numbers
of
Inserts
only
mm Inches
Solid Insert
1.089.0799.19
CD12MP-BK CD12MP-GY M12 x 1.5
1.4
.06
3.0
.12
1.6
.06
1.7
.07
1.4
.06
1.4
.06
1.7
.07
1.7
.07
2.3
.09
Solid Insert
1.089.0900.19
1.089.0901.19
1.089.0902.19
1.089.0903.19
1.089.0904.19
1.089.0905.19
1.089.0906.19
1.089.0907.19
1.089.0908.19
1.089.0999.19
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Black
Gray
CD25M1-BK
CD25M2-BK
CD25M3-BK
CD25M4-BK
CD25M5-BK
CD25M6-BK
CD25M7-BK
CD25M8-BK
CD25M9-BK
CD25MP-BK
Thread
Type
& Size
Dimensions in Inches (mm)
No. of
Holes
See page
49 for thread
specs
CD25M1-GY
4
CD25M2-GY
3
CD25M3-GY
2
CD25M4-GY
4
CD25M5-GY
1
M25 x 1.5
CD25M6-GY
4
CD25M7-GY
3
CD25M8-GY
4/1
CD25M9-GY
2
CD25MP-GY
Diameter
of Holes
mm Inches
6.0
.24
7.0
.28
8.0
.31
5.0
.20
8.0
.31
5.2
.20
5.2
.20
5.2/3.7 .20/.15
7.4
.29
Solid Insert
Part
Numbers
of
Inserts
only
1.089.2100.19
1.089.2101.19
1.089.2102.19
1.089.2103.19
1.089.2104.19
1.089.2105.19
1.089.2106.19
1.089.2107.19
1.089.2108.19
1.089.2199.19
CD16M1-BK
CD16M2-BK
CD16M3-BK
CD16M4-BK
CD16M5-BK
CD16M6-BK
CD16M7-BK
CD16M8-BK
CD16M9-BK
CD16MP-BK
CD16M1-GY
CD16M2-GY
CD16M3-GY
CD16M4-GY
CD16M5-GY
M16 x 1.5
CD16M6-GY
CD16M7-GY
CD16M8-GY
CD16M9-GY
CD16MP-GY
4
2
5
2
10
6
3
4
4
CD17M1-BK
CD17M2-BK
CD17M3-BK
CD17M4-BK
CD17M5-BK
CD17MP-BK
CD17M1-GY
CD17M2-GY
CD17M3-GY M16 x 1.5
CD17M4-GY (Enlarged)
CD17M5-GY
CD17MP-GY
2
3
2
3
4
3.0
.12
3.0
.12
4.0
.16
1.5
.06
2.8
.11
Solid Insert
CD20M1-BK
CD20M2-BK
CD20M3-BK
CD20M4-BK
CD20M5-BK
CD20M6-BK
CD20M7-BK
CD20M8-BK
CD20M9-BK
CD20MP-BK
CD20M1-GY
CD20M2-GY
CD20M3-GY
CD20M4-GY
CD20M5-GY
M20 x 1.5
CD20M6-GY
CD20M7-GY
CD20M8-GY
CD20M9-GY
CD20MP-GY
3
6
3
2
3
2
2
2
2
2.0
.08
3.0
.12
4.0
.16
5.0
.20
3.0
.12
5.2
.20
3.8
.15
4.2
.17
2.5
.10
Solid Insert
CD32M1-BK CD32M1-GY
6
6.5
.26 1.089.2900.19
CD32M2-BK CD32M2-GY
4
9.0
.35 1.089.2901.19
1.089.1100.19
M32 x 1.5
CD32M3-BK CD32M3-GY
4
9.5
.37 1.089.2902.19
1.089.1101.19
CD32MP-BK CD32MP-GY
Solid Insert
1.089.2999.19
1.089.1102.19
1.089.1103.19 CD40M1-BK CD40M1-GY
5
9.0
.35 1.089.3600.19
1.089.1104.19 CD40M2-BK CD40M2-GY
7
9.0
.35 1.089.3601.19
1.089.1199.19 CD40M3-BK CD40M3-GY M40 x 1.5 6
8.0
.31 1.089.3602.19
CD40M4-BK CD40M4-GY
2
15.0
.59 1.089.3603.19
1.089.1300.19
CD40MP-BK CD40MP-GY
Solid Insert
1.089.3699.19
1.089.1301.19
1.089.1302.19 CD50M1-BK CD50M1-GY
3
14.0
.55 1.089.4203.19
M50 x 1.5
Solid Insert
1.089.4299.19
1.089.1303.19 CD50MP-BK CD50MP-GY
1.089.1304.19
CD63M1-BK CD63M1-GY
8
10.0
.39 1.089.4800.19
1.089.1305.19
CD63M2-BK CD63M2-GY
6
12.0
.47 1.089.4801.19
M63 x 1.5
1.089.1306.19
CD63M3-BK CD63M3-GY
3
18.0
.71 1.089.4802.19
1.089.1307.19
CD63MP-BK CD63MP-GY
Solid Insert
1.089.4899.19
1.089.1308.19
For Strain Relief Fitting specifications and dimensions see Page 5
1.089.1399.19
CD22M1-BK
CD22M2-BK
CD22M3-BK
CD22M4-BK
CD22M5-BK
CD22M6-BK
CD22M7-BK
CD22M8-BK
CD22M9-BK
CD22M0-BK
CD22MP-BK
CD22M1-GY
CD22M2-GY
CD22M3-GY
CD22M4-GY
CD22M5-GY
M20 x 1.5
CD22M6-GY
(Enlarged)
CD22M7-GY
CD22M8-GY
CD22M9-GY
CD22M0-GY
CD22MP-GY
3
3
4
5
6
2
3
6
*4
6
3.0
.12
4.0
.16
4.0
.16
4.0
.16
4.0
.16
6.0
.24
5.6
.22
3.0
.12
3.0
.12
3.8
.15
Solid Insert
1.089.1600.19
1.089.1601.19
1.089.1602.19
1.089.1603.19
1.089.1604.19
1.089.1605.19
1.089.1606.19
1.089.1607.19
*1.089.1610.19
1.089.1609.19
1.089.1699.19
Optional Locking Nuts, O-Rings
& Other Accessories starting
on Page 28 - 39.
Dome Fittings also available
with the following approvals:
Strain Relief
www.sealconex.com
*Note: This Insert has slotted holes.
*Note: UL f1 rating applies to Black Nylon Fittings only.
How to feed a cable assembly with plug through a strain relief fitting:
Determine largest dimension of the plug.
Choose Strain Relief with appropriate Dome opening (see table on page 48).
Drill solid insert to exact cable diameter & slice insert on one side only.
Assemble by feeding Connector first through dome nut and Strain Relief body,
snap insert over cable and insert into body, tighten dome nut - Done!
5. This applies to PG, NPT or Metric solutions.
Insert
1.
2.
3.
4.
Fittings with Multi-Hole Inserts are also available with Flex Nut.
Dome
Opening
To order, substitute “CF” for “CD”
(e.g. CD16M1-BK becomes CF16M1-BK)
12 For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Plug
Custom Solutions for terminated cable!
Dome Nut
Features & Benefits:
NEMA 4x & 6 (IP 67 & 68) - Liquid Tight - Submersible to 300 ft!
IP 69K rated - Ideal in splash or hose down applications!
Patented Form Seal allows 150 PSIG (10 BAR) rating - Highest in Industry!
V0 flame rating according to UL 94 - Halogen & Phosphorous Free - non-toxic!
Concentric O-Ring Groove – for most NEMA applications
Large selection - Cable Range from .08” (2 mm) to 3.54” (90 mm)
Non-Corrosive - Resistant to salt water, weak acids, weak alkalis, alcohol,
esters, ketones, ether, gasoline, mineral, animal & vegetable oil
• Durable - Rugged Construction
• RoHS & Deca BDE - Environmentally Compliant to the newest
standards!
UL/UR
CSA
VDE
CAGE
PATENT
E103997
074032
71339
0 UE114
4145075
Nickel Plated Brass
•
•
•
•
•
•
•
w w w.www.sealconusa.com
s e a l c o nu s a . c o m
Clamping:
Extra Pull-Out Resistant
Strain Relief Fittings
PVDF / Steel
Your One Stop Solution For All Cable & Wire Accessories!
Pull-out Resistance & Cable Protection
Overlapping clamping splines apply a concentric pressure,
thereby preventing the form seal (grommet) from being pulled
out of the fitting. This ensures pull-out protection without
damage to the cable.
Accessories
ct
P ro d u
e
u
q
i
Un
Submersible
The patented internal sealing edge results in a
superior seal between the splined Nylon clamping
insert and Nickel Plated Brass body.
Adapter,Reducer,Enlarger
Unique Product
The patented recess and high performance form
seal guarantees NEMA 4x & 6 (IP 68 / IP 69K) at
150 PSIG (10 bar).
Conduit System
Liquid Tight
All of our Nickel Plated Brass parts come with an
O-Ring, which makes your application liquid tight,
allowing submersion up to 300 ft.
Technical Information
Easy Installation
The anti-rotation grooves between body and spline
insert prevent cable rotation while tightening the nut.
Time Saving Installation
Simply push the cable through Strain Relief Fitting - Tighten Dome or Flex Nut - Done!
No disassembly of the Fitting required!
Flex Nut
The 304 Stainless Steel spring
extension offers superior protection
against kinking and chafing of the
cable in dynamic applications.
Nickel Plated
Brass Fittings
come
an O-Ring.
For Material SpecificationsNote:
and Approval
Information,
please
referwith
to page
45.
Dimensions and specifications may be changed without prior notice.
Other Products / Index
Standard, Reduced and Multi-Hole Inserts
Modularity: Increase and decrease
cable opening by swapping out
inserts to accommodate various
cable sizes & configurations.
Nylon Strain Relief
Nylon Liquid
Nickel Plated
Brass Tight
LiquidStrain
Tight Relief
Strain Fittings
Relief Fittings
Features & Benefits
13
13
Nylon Strain Relief
Nickel Plated Brass
PVDF / Steel
Accessories
Adapter,Reducer,Enlarger
Conduit System
Technical Information
Other Products / Index
*
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Standard - PG/NPT/Metric Threads
Part Numbers
w w w. s e a l c o nu s a . c o m
Cable Range
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
Dome
Flex
Inches (mm)
CD07AA-BR
CD07AR-BR
CD09AA-BR
CD09AR-BR
CD11AA-BR
CD11AR-BR
CD13AA-BR
CD13AR-BR
CD16AA-BR
CD16AR-BR
CD21AA-BR
CD21AR-BR
CD29AA-BR
CD29AR-BR
CD36AA-BR
CD36AR-BR
CD42AA-BR
CD42AR-BR
CD48AA-BR
CD48AR-BR
CF07AA-BR
CF07AR-BR
CF09AA-BR
CF09AR-BR
CF11AA-BR
CF11AR-BR
CF13AA-BR
CF13AR-BR
CF16AA-BR
CF16AR-BR
CF21AA-BR
CF21AR-BR
-
CD09NA-BR
CD09NR-BR
CD13NA-BR
CD13NR-BR
CD16NA-BR
CD16NR-BR
CD21NA-BR
CD21NR-BR
CD29NA-BR
CD29NR-BR
CF09NA-BR
CF09NR-BR
CF13NA-BR
CF13NR-BR
CF16NA-BR
CF16NR-BR
CF21NA-BR
CF21NR-BR
-
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
CD12MA-BR
CD12MR-BR
CD16MA-BR
CD16MR-BR
CD17MA-BR
CD17MR-BR
CD20MA-BR
CD20MR-BR
CD22MA-BR
CD22MR-BR
CD25MA-BR
CD25MR-BR
CD32MA-BR
CD32MR-BR
CD40MA-BR
CD40MR-BR
CD50MA-BR
CD50MR-BR
CD63MA-BR
CD63MR-BR
CF12MA-BR
CF12MR-BR
CF16MA-BR
CF16MR-BR
CF17MA-BR
CF17MR-BR
CF20MA-BR
CF20MR-BR
CF22MA-BR
CF22MR-BR
CF25MA-BR
CF25MR-BR
-
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
.08 - .24 (2 - 6)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
1.14 - 1.38 (29 - 35)
Thread
Type
& Size
See page
49 for thread
specs
.12 - .26 (3 - 6.5)
PG 7 /
1/4” NPT
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
PG 9
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
PG 11
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
PG 13 / 13.5
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
PG 16
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
PG 21
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
PG 29
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
PG 36
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
PG 42
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
PG 48
1.14 - 1.38 (29 - 35)
Dimensions in Inches (mm)
A
B
C
D
F1/F
Clearance
Hole
Body
Length
(Dome)
Body
Length
(Flex)
Thread
Length
Wrench
Flats
.49 (12.5)
.75 (19)
2.17 (55)
.20 (5)
.55 (14)
.60 (15.2)
.83 (21)
2.60 (66)
.24 (6)
.67 (17)
.73 (18.5)
.87 (22)
3.03 (77)
.24 (6)
.79 (20)
.80 (20.3)
.94 (24)
3.46 (88)
.26 (6.5)
.87 (22)
.89 (22.5)
.91 (23)
3.86 (98)
.26 (6.5)
.94 (24)
1.12 (28.4)
.94 (24)
4.37 (111)
.28 (7)
1.18 (30)
-
.31 (8)
1.57 (40)
1.38 (35)
-
.31 (8)
1.97 (50)
2.13 (54.1) 1.46 (37)
-
.35 (9)
2.24 (57)
2.34 (59.4) 1.50 (38)
-
.39 (10)
2.52 (64)
+ .01”
(+.25 mm)
1.47 (37.3) 1.14 (29)
1.85(47)
3/8” NPT
.68 (17.2)
.83 (21)
2.60 (66)
.59 (15)
.67 (17) / .75 (19)
1/2” NPT
.83 (21.1)
.94 (24)
3.46 (88)
.51 (13)
.87 (22) / .94 (24)
1/2” NPT
.83 (21.1)
.94 (24)
3.89 (99)
.51 (13)
.94 (24)
3/4” NPT
1.05 (26.7)
.98 (25)
4.37 (111)
.51 (13)
1.18 (30)
-
.75 (19)
1.57 (40)
1” NPT
1.35 (34.3) 1.14 (29)
M12 x 1.5
.47 (12)
.75 (19)
2.17 (55)
.26 (6.5)
.55 (14)
M16 x 1.5
.63 (16)
.83 (21)
2.60 (66)
.24 (6)
.67 (17) / .75 (19)
Dome
Flex
Optional Locking
Nuts & Other
Accessories starting
on Page 28 - 39.
F1/F
M16 x 1.5
.63 (16)
.87 (22)
3.03 (77)
.24 (6)
.79 (20)
M20 x 1.5
.79 (20)
.91 (23)
3.46 (88)
.24 (6)
.87 (22)
M20 x 1.5
.79 (20)
.94 (24)
3.86 (98)
.24 (6)
.94 (24)
M25 x 1.5
.98 (25)
1.02 (26) 4.37 (111)
.28 (7)
1.18 (30)
M32 x 1.5
1.26 (32)
1.22 (31)
-
.31 (8)
1.57 (40)
M40 x 1.5
1.57 (40)
1.46 (37)
-
.31 (8)
1.97 (50)
M50 x 1.5
1.97 (50)
1.46 (37)
-
.35 (9)
2.24 (57)
M63 x 1.5
2.48 (63)
1.50 (38)
-
.39 (10) 2.52 (64) / 2.68 (68)
*Note: VDE Approval only applies to Fittings with Metric Thread.
A
14
Includes O-Ring.
For Material Specifications and Approval Information, please refer to page 45.
B
D
Dome Fittings also
available with the
following approvals:
www.sealconex.com
F1/F
Suggested Clearance
Hole for Non-Threaded
Mounting
Dimensions and specifications may be changed without prior notice.
C
D
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Mini WADI & WADI XL - PG & Metric Threads
**
w w w. s e a l c o nu s a . c o m
Mini WADI Fittings solve space restriction issues.
These mini components will fit into tight areas, but maintain the quality of their larger counterparts.
The Standard Buna-N/TPE or the FPM O-Ring creates a reliable seal between body and housing. Typical Mini Applications:
WADI Rating: 70 PSI, 5 BAR, IP68
• Fiber optics
• Sensors
Suggested Clearance
Mini WADI • Cameras
A
Hole for Non-Threaded
Smallest
• Switches
Mounting
Cable Gland
• Small appliances
F1/F
Mini WADI: Smallest Cable Gland
Part Numbers
- 4 ºF to 212 ºF
(- 20 ºC to 100 ºC)
Cable Range
Thread
Type
& Size
FPM
See page
49 for thread
specs
Inches (mm)
Locking Nuts for Mini WADI
Dimensions in Inches (mm)
A
D
B
B
Clearance Body
Hole
Length
+ .01”
(+.25 mm)
D
F1/F
Thread
Length
Wrench
Flats
Part Numbers Thread
Type
& Size
Dimens. Inches (mm)
G
H
Thickness
Wrench
Flats
See page
49 for thread
specs
-
.08 - .18 (2 - 4.5)
PG 7
Part Numbers
Cable Range
- 40 ºF to 212 ºF
(- 40 ºC to 100 ºC)
A
B
D
F1/F
Clearance
Hole
Body
Length
Thread
Length
Wrench
Flats
Part Numbers Thread Dimensions in Inches (mm)
Type
G
H
& Size
Wrench
Flats
See page
49 for thread
specs
+ .01”
(+.25 mm)
M63 x 1.5 2.48 (63) 1.65 (42) .39 (10)
M80 x 2
3.15 (80) 1.65 (42) .59 (15)
2.95 (75)
3.15 (80)
3.35 (85)
3.54 (90)
M90 x 2
3.54 (90) 1.65 (42) .59 (15)
3.94 (100)
M100 x 2 3.94 (100) 2.05 (52) .79 (20)
4.33 (110)
M110 x 2 4.33 (110) 2.05 (52) .79 (20)
4.72 (120)
M75 x 1.5 2.95 (75) 1.65 (42) .59 (15)
NM-63-BR
NM-75-XL
NM-80-XL
NM-90-XL
NM-10-XL
NM-11-XL
M63 x 1.5
M75 x 1.5
M80 x 2
M90 x 2
M100 x 2
M110 x 2
.24 (6)
.32 (8)
.32 (8)
.32 (8)
.43 (11)
.43 (11)
2.76 (70)
3.35 (85)
3.54 (90)
3.94 (100)
4.53 (115)
4.92 (125)
NG-52-XL
NG-30-XL
NG-40-XL
G 2-1/2”
G 3”
G 4”
.28 (7)
.32 (8)
.43 (11)
3.15 (80)
3.74 (95)
4.92 (125)
**Note: PCT (Gost) rating apply to G Thread WADI-XL only.
- 4 ºF to 212 ºF
(- 20 ºC to 100 ºC)
1.89 - 2.17 (48 - 55)
G 2-1/2” 2.96 (75.8) 1.65 (42)
2.09 - 2.36 (53 - 60)
2.28 - 2.56 (58 - 65)
G 3” 3.46 (87.9) 1.65 (42)
2.48 - 2.76 (63 - 70)
2.68 - 2.95 (68 - 75)
2.05 (52)
2.87 - 3.15 (73 - 80)
G4”
4.45 (113)
3.07 - 3.35 (78 - 85)
2.05 (52)
3.27 - 3.54 (83 - 90)
3.15 (80)
3.35 (85)
3.54 (90) / 3.74 (95)
.71 (18)
3.94 (100)
3.94(100) / 4.72(120)
.87 (22)
4.33(110) / 4.72(120)
4.33(110) / 4.72(120)
.87 (22)
4.72 (120)
.71 (18)
Optional Locking Nuts, O-Rings
& Other Accessories starting
on Page 28 - 39.
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
15
Other Products / Index
CX52GA-BR
CX52GB-BR
CX30GA-BR
CX30GB-BR
CX40GA-BR
CX40GB-BR
CX40GC-BR
CX40GD-BR
Thickness
Technical Information
Inches (mm)
1.89 - 2.17 (48 - 55)
1.89 - 2.17 (48 - 55)
2.09 - 2.36 (53 - 60)
2.28 - 2.56 (58 - 65)
2.48 - 2.76 (63 - 70)
2.68 - 2.95 (68 - 75)
2.87 - 3.15 (73 - 80)
3.07 - 3.35 (78 - 85)
3.27 - 3.54 (83 - 90)
See page
49 for thread
specs
Dimensions in Inches (mm)
Conduit System
Buna N
CX63MA-BR
CX75MA-BR
CX75MB-BR
CX80MA-BR
CX90MA-BR
CX90MB-BR
CX10MA-BR
CX10MB-BR
CX11MA-BR
Thread
Type
& Size
Locking Nuts for WADI XL
Adapter,Reducer,Enlarger
WADI XL: Largest Cable Glands
Accessories
(11) /
NP-07-BR
PG 7
.11 (2.8)
.59 (15)
.49 (12.5) .56 (14.3) .14 (3.5) .43
.59 (15)
NM-06-BR
M6 x 1.0
.10 (2.5)
.39 (10)
CD06MW-BR CD06MW-RV .08 - .13 (2 - 3.2) M6 x 1
.25 (6) .39 (10) .24 (6) .31 (8)
NM-08-BR M8 x 1.25 .10 (2.5)
.51 (13)
CD08MW-BR CD08MW-RV** .12 - .20 (3 - 5) M8 x 1.25 .33 (8) .51 (13) .24 (6) .43 (11)
NM-10-BR M10 x 1.5 .11 (2.8)
.51 (13)
CD10MW-BR
.16 - .24 (4 - 6) M10 x 1.5 .39 (10) .55 (14) .24 (6) .47 (12)
*Note: CD07AW-BR does not come with an O-Ring
Typical XL Applications:
**Note: CD08MW-RV is Black FPM
• Machine & Apparatus
B
• Automation
• Railroads
WADI XL • Ship Building
Largest
• Off-shore
D
Cable Gland
• Renewable Energy
Wrench Flat (H)
• Utilities
F1/F
• Nuclear Power
G
• Printing Machines
Silicone or FPM Inserts & O-Rings for WADI XL Fittings are available on request.
For inquiries - please call our Inside Technical Sales Department (800-456-9012 or 303-699-1135).
CD07AW-BR*
PVDF / Steel
Buna-N/TPE
- 13 ºF to 392 ºF
(- 25 ºC to 200 ºC)
Nickel Plated Brass
*Note: CE rating applies to Mini WADI Fittings only.
Nylon Strain Relief
*
Nylon Strain Relief
*
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Elongated - PG & Metric Threads
Part Numbers
w w w. s e a l c o nu s a . c o m
Cable Range
Accessories
PVDF / Steel
Nickel Plated Brass
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
Dome Fittings
Flex Fittings
CD07CA-BR
CD07CR-BR
CD09CA-BR
CD09CR-BR
CD11CA-BR
CD11CR-BR
CD13CA-BR
CD13CR-BR
CD16CA-BR
CD16CR-BR
CD21CA-BR
CD21CR-BR
CD29CA-BR
CD29CR-BR
CD36CA-BR
CD36CR-BR
CD42CA-BR
CD42CR-BR
CD48CA-BR
CD48CR-BR
CF07CA-BR
CF07CR-BR
CF09CA-BR
CF09CR-BR
CF11CA-BR
CF11CR-BR
CF13CA-BR
CF13CR-BR
CF16CA-BR
CF16CR-BR
CF21CA-BR
CF21CR-BR
-
Thread
Type
& Size
See page
49 for thread
specs
Inches (mm)
Dimensions in Inches (mm)
A
B
C
D
F1/F
Clearance
Hole
Body Length
(Dome)
Body Length
(Flex)
Thread
Length
Wrench
Flats
.49 (12.5)
.75 (19)
2.17 (55)
.39 (10)
.55 (14)
.60 (15.2)
.83 (21)
2.60 (66)
.39 (10)
.67 (17)
.73 (18.5)
.87 (22)
3.03 (77)
.39 (10)
.79 (20)
.80 (20.3)
.94 (24)
3.46 (88)
.39 (10)
.87 (22)
.89 (22.5)
.91 (23)
3.86 (98)
.39 (10)
.94 (24)
1.12 (28.4)
.94 (24)
4.37 (111)
.47 (12)
1.18 (30)
1.47 (37.3)
1.14 (29)
-
.47 (12)
1.57 (40)
1.85 (47)
1.38 (35)
-
.59 (15)
1.97 (50)
2.13 (54.1)
1.46 (37)
-
.59 (15)
2.24 (57)
2.34 (59.4)
1.50 (38)
-
.59 (15)
2.52 (64)
+ .01” (+.25 mm)
.12 - .26 (3 - 6.5)
PG 7
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
PG 9
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
PG 11
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
PG 13 / 13.5
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
PG 16
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
PG 21
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
PG 29
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
PG 36
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
PG 42
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
PG 48
1.14 - 1.38 (29 - 35)
Adapter,Reducer,Enlarger
Elongated is recommended where the Strain Relief has to pass through
a thick wall or the application just needs the extra thread length.
Dome Fittings also
available with the
following approvals:
F1/F
Wall
Suggested Clearance
Hole for Non-Threaded
Mounting
A
F1/F
Wall
www.sealconex.com
Optional Locking Nuts &
Other Accessories starting
on Page 28 - 39.
B
D
Conduit System
C
Other Products / Index
Technical Information
CD12DA-BR
CD12DR-BR
CD16DA-BR
CD16DR-BR
CD17DA-BR
CD17DR-BR
CD20DA-BR
CD20DR-BR
CD22DA-BR
CD22DR-BR
CD25DA-BR
CD25DR-BR
CD32DA-BR
CD32DR-BR
CD40DA-BR
CD40DR-BR
CD50DA-BR
CD50DR-BR
CD63DA-BR
CD63DR-BR
CF12DA-BR
CF12DR-BR
CF16DA-BR
CF16DR-BR
CF17DA-BR
CF17DR-BR
CF20DA-BR
CF20DR-BR
CF22DA-BR
CF22DR-BR
CF25DA-BR
CF25DR-BR
-
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
1.14 - 1.38 (29 - 35)
D
M12 x 1.5
.47 (12)
.75 (19)
2.17 (55)
.39 (10)
.55 (14)
M16 x 1.5
.63 (16)
.83 (21)
2.60 (66)
.39 (10)
.67 (17) / .75 (19)
Dome
Flex
M16 x 1.5
.63 (16)
.87 (22)
3.03 (77)
.39 (10)
.79 (20)
M20 x 1.5
.79 (20)
.91 (23)
3.46 (88)
.39 (10)
.87 (22)
M20 x 1.5
.79 (20)
.94 (24)
3.86 (98)
.39 (10)
.94 (24)
M25 x 1.5
.98 (25)
1.02 (26)
4.37 (111)
.47 (12)
1.18 (30)
M32 x 1.5
1.26 (32)
1.22 (31)
-
.47 (12)
1.57 (40)
M40 x 1.5
1.57 (40)
1.46 (37)
-
.59 (15)
1.97 (50)
M50 x 1.5
1.97 (50)
1.46 (37)
-
.59 (15)
2.24 (57)
M63 x 1.5
2.48 (63)
1.50 (38)
-
.59 (15)
2.52 (64) / 2.68 (68)
*Note: VDE Approval only applies to Fittings with Metric Threads.
16
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
L
Part Numbers
Cable Range
Thread
Type
& Size
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
H
F
A
w/ Connection
Threads
min. 0.04” x 45º (1 x 45º)
ED20MA-BR *
ED20MR-BR *
ED13AA-BR
ED13AR-BR
-
M20 x 1.5 / PG 13.5
A
Suggested Clearance
Hole for Non-Threaded
Mounting
ED20FA-BR
ED20FR-BR
D
F
Thread
Length
Wrench
Flats
+ .01” (+.25
mm)
*Note: VDE Approval only applies to Fittings with Metric Threads.
.98” (25)
.78” (19.8)
Robust - Compact - Low profile!
Secure your connection with these flange or threaded 90° Elbow Fittings.
Saves Space and Time!
Quick & Easy Installation: Insert cable into open 90° Elbow Fitting. Close fitting
and secure with screws. Tighten dome nut for a liquid tight connection.-Done!
.78” (19.8)
F
L
Body
Length
.39 - .55 (10 - 14)
M20 x 1.5 .79 (20) 1.46 (37) 2.60 (66) .24 (6) .98 (25)
.28 - .47 (7 - 12)
.39 - .55 (10 - 14) PG 13 /
.80 (20.3) 1.46 (37) 2.60 (66) .24 (6) .98 (25)
13.5
.28 - .47 (7 - 12)
.39 - .55 (10 - 14)
Flange
.79 (20) 1.14 (29) 2.60 (66)
.98 (25)
.28 - .47 (7 - 12)
.13” (3.2)
H
.78” (19.8)
See page
49 for thread
specs
Inches (mm)
H
Accessories
Nickel Plated Brass Liquid Tight Strain Relief Fittings
Clamp (Extra Pull-out Resistance) - PG/NPT/Metric
*
Part Numbers
Cable Range
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
-
.16 - .31 (4 - 8)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.71 - .98 (18 - 25)
CD12DA-MZ .12 - .26 (3 - 6.5)
CD16DA-MZ
.16 - .31 (4 - 8)
CD17DA-MZ
.24 - .39 (6 - 10)
CD20DA-MZ
.24 - .47 (6 - 12)
CD22DA-MZ .39 - .55 (10 - 14)
CD25DA-MZ .51 - .71 (13 - 18)
CD32DA-MZ .71 - .98 (18 - 25)
CD40DA-MZ .87 - 1.26 (22 - 32)
CD50DA-MZ 1.26 - 1.50 (32 - 38)
CD50DR-MZ .98 - 1.22 (25 - 31)
CD63DA-MZ 1.46 - 1.73 (37 - 44)
CD63DR-MZ 1.14 - 1.38 (29 - 35)
D
D
F1/F
Clearance
Hole
Body
Length
Thread
Length
Thread
Length
Wrench
Flats
+ .01”
(+.25 mm)
.49 (12.5)
.60 (15.2)
.73 (18.5)
.80 (20.3)
.89 (22.5)
1.12 (28.4)
1.47 (37.3)
1.85 (47)
Standard Elongated
1.02 (26) .20 (5) .39 (10)
1.10 (28) .24 (6) .39 (10)
1.18 (30) .24 (6) .39 (10)
1.30 (33) .25 (6.5) .39 (10)
1.30 (33) .25 (6.5) .39 (10)
1.46 (37) .28 (7) .47 (12)
1.69 (43) .31 (8) .47 (12)
1.97 (50) .31 (8) .59 (15)
2.13 (54.1) 2.01 (51)
.35 (9)
.55 (14)
.67 (17)
.79 (20)
.87 (22)
.94 (24)
1.18 (30)
1.57 (40)
1.97 (50)
.59 (15)
2.24 (57)
2.34 (59.4) 2.01 (51) .39 (10) .59 (15)
2.52 (64)
High Performance
Strain Relief Clamp
Fittings provides
Extra Pull-out
Resistance.
Standard
O-Ring
Screw
Clamp
F1/F
3/8” NPT .68 (17.2)
1/2” NPT .83 (21.1)
3/4” NPT 1.05 (26.7)
1” NPT 1.35 (34.3)
1.10 (28)
1.30 (33)
1.46 (37)
1.69 (43)
M12 x 1.5
M16 x 1.5
M16 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
.47 (12)
.63 (16)
.63 (16)
.79 (20)
.79 (20)
.98 (25)
1.26 (32)
1.57 (40)
1.02 (26) .26 (6.5)
1.10 (28) .24 (6)
1.18 (30) .24 (6)
1.30 (33) .24 (6)
1.30 (33) .24 (6)
1.46 (37) .28 (7)
1.69 (43) .31 (8)
1.97 (50) .31 (8)
M50 x 1.5
1.97 (50) 2.01 (51)
.59 (15)
2.24 (57)
Dome Fittings also available
with the following approvals:
M63 x 1.5
2.48 (63) 2.05 (52) .39 (10) .59 (15)
2.52 (64) /
2.68 (68)
www.sealconex.com
*Note: VDE Approval only applies to Standard Fittings with Metric Threads.
.59 (15)
.51 (13)
.51 (13)
.75 (19)
.35 (9)
-
.67 (17) / .75 (19)
.87 (22) / .94 (24)
1.18 (30)
1.57 (40)
.39 (10)
.55 (14)
.39 (10) .67 (17) / .75 (19)
.39 (10)
.79 (20)
.39 (10)
.87 (22)
.39 (10)
.94 (24)
.47 (12)
1.18 (30)
.47 (12)
1.57 (40)
.59 (15)
1.97 (50)
B
D
A
Suggested Clearance
Hole for Non-Threaded
Mounting
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
17
Other Products / Index
CD12MA-MZ
CD16MA-MZ
CD17MA-MZ
CD20MA-MZ
CD22MA-MZ
CD25MA-MZ
CD32MA-MZ
CD40MA-MZ
CD50MA-MZ
CD50MR-MZ
CD63MA-MZ
CD63MR-MZ
CD07CA-MZ .12 - .26 (3 - 6.5)
PG 7
CD09CA-MZ
.16 - .31 (4 - 8)
PG 9
CD11CA-MZ
.24 - .39 (6 - 10)
PG 11
CD13CA-MZ
.24 - .47 (6 - 12) PG 13 / 13.5
CD16CA-MZ .39 - .55 (10 - 14)
PG 16
CD21CA-MZ .51 - .71 (13 - 18)
PG 21
CD29CA-MZ .71 - .98 (18 - 25)
PG 29
CD36CA-MZ .87 - 1.42 (22 - 36)
PG 36
CD42CA-MZ 1.26 - 1.50 (32 - 38)
PG 42
CD42CR-MZ .98 - 1.22 (25 - 31)
CD48CA-MZ 1.46 - 1.73 (37 - 44)
PG 48
CD48CR-MZ 1.14 - 1.38 (29 - 35)
B
Technical Information
CD09NA-MZ
CD13NA-MZ
CD21NA-MZ
CD29NA-MZ
Inches (mm)
A
Conduit System
CD07AA-MZ
CD09AA-MZ
CD11AA-MZ
CD13AA-MZ
CD16AA-MZ
CD21AA-MZ
CD29AA-MZ
CD36AA-MZ
CD42AA-MZ
CD42AR-MZ
CD48AA-MZ
CD48AR-MZ
Elongated
See page
49 for thread
specs
Dimensions in Inches (mm)
Adapter,Reducer,Enlarger
Standard
Thread
Type
& Size
PVDF / Steel
L
w/ Mounting
Flange
A
Clearance Body
Hole
Height
Nickel Plated Brass
D
Dimensions in Inches (mm)
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
90º Angled Elbow - PG & Metric Threads / Flange
*
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
EMI/RFI Proof - Product Features
w w w. s e a l c o nu s a . c o m
Nickel Plated Brass
EMI (Electromagnetic Interference) / RFI (Radio Frequency Interference) is an unwanted
disturbance that affects an electrical circuit due to either electromagnetic conduction or
electromagnetic radiation emitted from an external source. The disturbance may interrupt,
obstruct, or otherwise limit the effective performance of the circuit.
These Liquid Tight EMI / RFI - Proof Grounded Strain Relief Fittings made of Nickel
Plated Brass are the perfect answer to stringent requirements for reliable grounding
and protection from electromagnetic interference.
PVDF / Steel
Two styles are available: Standard and Feed-Through.
Accessories
Standard
(-BE)
The Standard version has an integral O-ring, which presses the braiding
against the inside wall of the body but can only be used with braided shield.
Overlapping clamping splines apply a concentric force, thereby
preventing the form seal from being pulled out of the fitting.
This ensures pull-out protection without damage to the cable.
Adapter,Reducer,Enlarger
The patented internal sealing edge results in a superior
seal between the splined Nylon clamping insert and
Nickel Plated Brass body.
Conduit System
Patented 360° grounding due to the internal O-Ring,
which ensures perfect contact between braided
shield of cable and fitting.
Feed-Through works well with foil or braided shield and provides
reliable grounding by means of metal spring fingers.
Technical Information
Feed-Through
(-FE)
Overlapping clamping splines apply a concentric
force, thereby preventing the form seal from being
pulled out of the fitting. This ensures pull-out
protection without damage to the cable.
Other Products / Index
Our Metal-coated Nylon splines
provides the higest electrical
conductivity ratings in the industry.
Flexible contact points allow contact with
variable braid and foil cable diameters and
adds additional strain relief to a solution.
18
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Dome Fittings also available
with the following approvals:
www.sealconex.com
w w w. s e a l c o nu s a . c o m
Dome Fittings also available
with the following approvals:
www.sealconex.com
Nickel Plated Brass
• Halogen and Phosphorous-Free / Non-Toxic
• Fire Protection Class V0 According to UL 94
• Liquid Tight per NEMA 4x & 6 to 150 PSIG (IP 68 to 10 bar)
• Quick Assembly and Reliable Grounding of Braid or Foil Shielded Cables
EMI/RFI Proof Strain Relief Fittings Applications:
• Measuring, control and feedback systems
• Traffic, etc.
• Telecommunication
• Control panels
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
EMI/RFI Proof - Applications & Assembly
Also used in all areas where in addition to a reliable liquid tight seal, high pull-out resistance and anti-rotation
provisions, a dependable contact with the cable shield is required.
PVDF / Steel
Accessories
To ensure a good ground connection between the Cord Grip and a Metal Enclosure,
we strongly recommend the use of EMI/RFI Locking Nuts (Page 29) for non-threaded
mounting.
These Locking Nuts have cutting edges which will slice
through paint coatings on a metal enclosure to ensure
grounding (Page 29). Also, these Locking Nuts are suitable for vibrating applications.
Adapter,Reducer,Enlarger
EMI/RFI Locking Nuts
with Cutting Edges
Assembly Instructions
Standard (-BE)
Feed-Through (-FE)
Step 1
Option 1 - Partial Jacket Stripping:
• Expose shield approximately 7/16” (10 mm)
• Insert cable into fitting until the foil or braid
reaches the contact position
• Tighten the dome nut
• Finished
Conduit System
• Strip cable
• Expose braided shield
Option 2 - Total Jacket Removed:
Step 2
Step 3
• Remove cable jacket to expose the braid or foil
Insert cable into fitting until the braid reaches
the contact point
• Tighten the dome nut
• Finished
Technical Information
• Feed cable through dome nut &
clamping insert
• Fold braided shield back over
O-Ring on clamping insert
• Make sure that braided shield
overlaps the O-ring by 3/32” (2 mm) only
Option 3 - Fold Shield over Jacket:
• Strip cable jacket & braiding to different lengths
• For smaller cable diameters fold the braided
shield back over the cable jacket
• Insert cable into fitting until the braid reaches the
contact point
• Tighten the dome nut
• Finished
Questions or concerns? - Please call our well-trained Inside Technical Sales Department (800-456-9012 or 303-699-1135).
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
19
Other Products / Index
• Push clamping insert into body
• Tighten dome nut
• Finished
Nylon Strain Relief
*
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
EMI/RFI Proof - PG/NPT/Metric & Elongated
w w w. s e a l c o nu s a . c o m
EMI/RFI Ground Proof: Standard Version (-BE)
Part Numbers
Cable Range
Thread
Type
& Size
Technical Information
Conduit System
Adapter,Reducer,Enlarger
Accessories
PVDF / Steel
Nickel Plated Brass
- 40 °F to 212 °F (- 40 °C to 100 °C)
Dome
Standard
Flex
Standard
Dome
Elongated
Flex
Elongated
CD07AA-BE
CD07AR-BE
CD09AA-BE
CD09AR-BE
CD11AA-BE
CD11AR-BE
CD13AA-BE
CD13AR-BE
CD16AA-BE
CD16AR-BE
CD21AA-BE
CD21AR-BE
CD29AA-BE
CD29AR-BE
CD36AA-BE
CD36AR-BE
CD42AA-BE
CD42AR-BE
CD48AA-BE
CD48AR-BE
CF07AA-BE
CF07AR-BE
CF09AA-BE
CF09AR-BE
CF11AA-BE
CF11AR-BE
CF13AA-BE
CF13AR-BE
CF16AA-BE
CF16AR-BE
CF21AA-BE
CF21AR-BE
-
CD07CA-BE
CD07CR-BE
CD09CA-BE
CD09CR-BE
CD11CA-BE
CD11CR-BE
CD13CA-BE
CD13CR-BE
CD16CA-BE
CD16CR-BE
CD21CA-BE
CD21CR-BE
CD29CA-BE
CD29CR-BE
CD36CA-BE
CD36CR-BE
CD42CA-BE
CD42CR-BE
CD48CA-BE
CD48CR-BE
CF07CA-BE
CF07CR-BE
CF09CA-BE
CF09CR-BE
CF11CA-BE
CF11CR-BE
CF13CA-BE
CF13CR-BE
CF16CA-BE
CF16CR-BE
CF21CA-BE
CF21CR-BE
-
CD09NA-BE
CD09NR-BE
CD13NA-BE
CD13NR-BE
CD21NA-BE
CD21NR-BE
CF09NA-BE
CF09NR-BE
CF13NA-BE
CF13NR-BE
CF21NA-BE
CF21NR-BE
-
-
CD12MA-BE
CD12MR-BE
CD16MA-BE
CD16MR-BE
CD20MA-BE
CD20MR-BE
CD25MA-BE
CD25MR-BE
CD32MA-BE
CD32MR-BE
CD40MA-BE
CD40MR-BE
CD50MA-BE
CD50MR-BE
CD63MA-BE
CD63MR-BE
CF12MA-BE
CF12MR-BE
CF16MA-BE
CF16MR-BE
CF20MA-BE
CF20MR-BE
CF25MA-BE
CF25MR-BE
-
CD12DA-BE
CD12DR-BE
CD16DA-BE
CD16DR-BE
CD20DA-BE
CD20DR-BE
CD25DA-BE
CD25DR-BE
CD32DA-BE
CD32DR-BE
CD40DA-BE
CD40DR-BE
Available
Available
Available
Available
CF12DA-BE
CF12DR-BE
CF16DA-BE
CF16DR-BE
CF20DA-BE
CF20DR-BE
CF25DA-BE
CF25DR-BE
-
See page
49 for thread
specs
Inches (mm)
Dimensions in Inches (mm)
A
B
Clearance Body
Length
Hole
(Dome)
C
D
D
F1/F
Body
Length
(Flex)
Thread
Length
Thread
Length
Wrench
Flats
Standard
Elongated
2.17 (55)
.20 (5)
.39 (10)
.55 (14)
2.60 (66)
.24 (6)
.39 (10)
.67 (17)
3.03 (77)
.24 (6)
.39 (10)
.79 (20)
3.46 (88) .26 (6.5)
.39 (10)
.87 (22)
3.86 (98) .26 (6.5)
.39 (10)
.94 (24)
4.37 (111)
.28 (7)
.47 (12)
1.18 (30)
-
.31 (8)
.47 (12)
1.57 (40)
-
.31 (8)
.59 (15)
1.97 (50)
-
.35 (9)
.59 (15)
2.24 (57)
-
.39 (10)
.59 (15)
2.52 (64)
+ .01”
(+.25 mm)
.12 - .26 (3 - 6.5)
PG 7 /
.49 (12.5) .75 (19)
.08 - .20 (2 - 5) 1/4” NPT
.16 - .31 (4 - 8)
PG 9
.60 (15.2) .83 (21)
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
PG 11 .73 (18.5) .87 (22)
.12 - .28 (3 - 7)
.24 - .47 (6 - 12) PG 13 /
.80 (20.3) .94 (24)
13.5
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
PG 16 .89 (22.5) .91 (23)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
PG 21 1.12 (28.4) .94 (24)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
PG 29 1.47 (37.3) 1.14 (29)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
PG 36 1.85 (47) 1.38 (35)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
PG 42 2.13 (54.1) 1.46 (37)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
PG 48 2.34 (59.4) 1.50 (38)
1.14 - 1.38 (29 - 35)
.16 - .31 (4 - 8)
3/8” NPT .68 (17.2) .83 (21) 2.60 (66) .59 (15)
.08 - .24 (2 - 6)
.24 - .47 (6 - 12)
1/2” NPT .83 (21.1) .94 (24) 3.46 (88) .51 (13)
.20 - .35 (5 - 9)
.51 - .71 (13 - 18)
3/4” NPT 1.05 (26.7) .98 (25) 4.37 (111) .51 (13)
.35 - .63 (9 - 16)
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.20 - .39 (5 - 10)
.12 - .28 (3 - 7)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
1.14 - 1.38 (29 - 35)
-
.67 (17) /
.75 (19)
.87 (22) /
.94 (24)
-
1.18 (30)
M12 x 1.5 .47 (12)
.75 (19) 2.17 (55) .26 (6.5)
.39 (10)
.55 (14)
M16 x 1.5 .63 (16)
.87 (22) 3.03 (77)
.24 (6)
.39 (10)
.79 (20)
M20 x 1.5 .79 (20)
.94 (24) 3.86 (98)
.24 (6)
.39 (10)
.94 (24)
M25 x 1.5 .98 (25) 1.02 (26) 4.37 (111)
.28 (7)
.47 (12)
1.18 (30)
M32 x 1.5 1.26 (32) 1.22 (31)
-
.31 (8)
.47 (12)
1.57 (40)
M40 x 1.5 1.57 (40) 1.46 (37)
-
.31 (8)
.59 (15)
1.97 (50)
M50 x 1.5 1.97 (50) 1.46 (37)
-
.35 (9)
.59 (15)
2.24 (57)
M63 x 1.5 2.48 (63) 1.50 (38)
-
.39 (10)
.59 (15)
2.52 (64) /
2.68 (68)
*Note: VDE Approval only applies to Dome Fittings with Metric Threads. UL, UR & CSA Approval applies to Dome Fittings.
Other Products / Index
Standard
(-BE)
EMI/RFI Fittings are also available with High Performance Clamp or in Stainless Steel.
For inquiries - please call our Inside Technical Sales Department (800-456-9012 or 303-699-1135).
Dome Fittings also available
with the following approvals:
20
For Material Specifications and Approval Information, please refer to page 45.
www.sealconex.com
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
EMI/RFI Ground Proof: Feed-Through Version (-FE)
Part Numbers
Cable Range
Thread Type
& Size
- 40 °F to 212 °F (- 40 °C to 100 °C)
Inches (mm)
-
CD09NA-FE
CD13NA-FE
CD21NA-FE
-
.16 - .31 (4 - 8)
.24 - .47 (6 - 12)
.51 - .71 (13 - 18)
CD12MA-FE
CD16MA-FE
CD16MR-FE
CD20MA-FE
CD20MR-FE
CD25MA-FE
CD32MA-FE
CD40MA-FE
CD50MA-FE
CD63MA-FE
CD12DA-FE
CD16DA-FE
CD16DR-FE
CD20DA-FE
CD20DR-FE
CD25DA-FE
CD32DA-FE
CD40DA-FE
CD50DA-FE
CD63DA-FE
.12 - .26 (3 - 6.5)
.20 - .39 (5 - 10)
.16 - .31 (4 - 8)
.39 - .55 (10 - 14)
.24 - .47 (6 - 12)
.51 - .71 (13 - 18)
.71 - .98 (18 - 25)
.94 - 1.26 (24 - 32)
1.26 - 1.50 (32 - 38)
1.46 - 1.73 (37 - 44)
.12 - .26 (3 - 6.5) PG 7 / 1/4” NPT
.16 - .31 (4 - 8)
PG 9
.20 - .39 (5 - 10)
PG 11
.24 - .47 (6 - 12)
PG 13 / 13.5
.39 - .55 (10 - 14)
PG 16
.51 - .71 (13 - 18)
PG 21
.71 - .98 (18 - 25)
PG 29
.94 - 1.26 (24 - 32)
PG 36
1.26 - 1.50 (32 - 38)
PG 42
1.46 - 1.73 (37 - 44)
PG 48
D
F1/F
Clearance
Hole
Body
Length
Thread
Length
Thread
Length
Wrench
Flats
Standard
Elongated
+ .01”
(+.25 mm)
.49 (12.5)
.60 (15.2)
.73 (18.5)
.80 (20.3)
.88 (22.3)
1.12 (28.4)
1.47 (37.3)
1.85 (47)
2.13 (54.1)
2.34 (59.4)
.94 (24)
1.10 (28)
1.14 (29)
1.22 (31)
1.26(32)
1.50 (38)
1.69 (43)
1.89 (48)
1.77 (45)
1.81 (46)
.20 (5)
.24 (6)
.24 (6)
.26 (6.5)
.26 (6.5)
.28 (7)
.31 (8)
.31 (8)
.35 (9)
.39 (10)
-
.55 (14)
.67 (17)
.79 (20)
.87 (22)
.94 (24)
1.18 (30)
1.57 (40)
1.97 (50)
2.24 (57)
2.52 (64)
3/8” NPT
1/2” NPT
3/4” NPT
.68 (17.2)
.83 (21.1)
1.05 (26.7)
1.14 (29)
1.28 (32.5)
1.54 (39)
.59 (15)
.51 (13)
.51 (13)
-
.67 (17) / .75 (19)
.87 (22) / .94 (24)
1.18 (30)
M12 x 1.5
M16 x 1.5
M16 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.47 (12)
.63 (16)
.63 (16)
.79 (20)
.79 (20)
.98 (25)
1.26 (32)
1.57 (40)
1.97 (50)
2.48 (63)
.98 (25)
1.26 (32)
1.14 (29)
1.30 (33)
1.28 (32.5)
1.54 (39)
1.77 (45)
2.01 (51)
2.24 (57.5)
2.05 (52)
.26 (6.5)
.24 (6)
.24 (6)
.24 (6)
.24 (6)
.28 (7)
.31 (8)
.31 (8)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.47 (12)
.47 (12)
.59 (15)
.59 (15)
.59 (15)
.55 (14)
.79 (20)
.67 (17) / .75 (19)
.94 (24)
.87 (22)
1.18 (30)
1.57 (40)
1.97 (50)
2.24 (57)
2.52 (64) / 2.68 (68)
Feed-Through Products are Quick,
Reliable & Labor Saving!
Feed-Through
(-FE)
F1/F
Partial Jacket Stripping
www.sealconex.com
A
D
Suggested Clearance
Hole for Non-Threaded
Mounting
Technical Information
Other Optional Locking
Nuts & Other Accessories
starting on Page 28 - 39.
B
Conduit System
Dome Fittings also available
with the following approvals:
Total Jacket Removal
Other Products / Index
Fold Shield Over
Jacket
Use our recommened EMI Locking Nuts with cutting
edges which will cut through paint to ensure proper
grounding (see page 29). Also, these Locking Nuts are
suitable for vibrating applications.
Metalized Finger
for additional EMI
Shielding.
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Adapter,Reducer,Enlarger
CD07AA-FE
CD09AA-FE
CD11AA-FE
CD13AA-FE
CD16AA-FE
CD21AA-FE
CD29AA-FE
CD36AA-FE
CD42AA-FE
CD48AA-FE
D
Accessories
Elongated
B
PVDF / Steel
Standard
A
Nickel Plated Brass
See page
49 for thread
specs
Dimensions in Inches (mm)
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
EMI/RFI Proof - PG/NPT/Metric & Elongated
21
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Multi-Hole - PG Threads
*
w w w. s e a l c o nu s a . c o m
Thread
Dimensions in Inches (mm)
Type No. of
Diameter
Part
& Size Holes
of Holes
Numbers
of
Inserts
See page
only
49 for thread
**
Dome
Flex
mm Inches
specs
PG 7 /
CD07AP-BR CF07AP-BR
Solid Insert
1.089.0799.19
1/4” NPT
Part Numbers
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
CF09A1-BR
CF09A2-BR
CF09A3-BR
CF09A4-BR
CF09A5-BR
CF09A6-BR
CF09A7-BR
CF09A8-BR
CF09A9-BR
CF09AP-BR
CD11A1-BR
CD11A2-BR
CD11A3-BR
CD11A4-BR
CD11A5-BR
CD11AP-BR
CF11A1-BR
CF11A2-BR
CF11A3-BR
CF11A4-BR
CF11A5-BR
CF11AP-BR
CD13A1-BR
CD13A2-BR
CD13A3-BR
CD13A4-BR
CD13A5-BR
CD13A6-BR
CD13A7-BR
CD13A8-BR
CD13A9-BR
CD13AP-BR
CD16A1-BR
CD16A2-BR
CD16A3-BR
CD16A4-BR
CD16A5-BR
CD16A6-BR
CD16A7-BR
CD16A8-BR
CD16A9-BR
CD16A0-BR
CD16AP-BR
Technical Information
Conduit System
PVDF / Steel
CD09A1-BR
CD09A2-BR
CD09A3-BR
CD09A4-BR
CD09A5-BR
CD09A6-BR
CD09A7-BR
CD09A8-BR
CD09A9-BR
CD09AP-BR
Accessories
Part Numbers
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
Adapter,Reducer,Enlarger
Nickel Plated Brass
*
4
2
5
2
10
6
3
4
4
1.4
.06
3.0
.12
1.6
.06
1.7
.07
1.4
.06
1.4
.06
1.7
.07
1.7
.07
2.3
.09
Solid Insert
1.089.0900.19
1.089.0901.19
1.089.0902.19
1.089.0903.19
1.089.0904.19
1.089.0905.19
1.089.0906.19
1.089.0907.19
1.089.0908.19
1.089.0999.19
2
3
2
3
4
3.0
.12
3.0
.12
4.0
.16
1.5
.06
2.8
.11
Solid Insert
1.089.1100.19
1.089.1101.19
1.089.1102.19
1.089.1103.19
1.089.1104.19
1.089.1199.19
CF13A1-BR
CF13A2-BR
CF13A3-BR
CF13A4-BR
CF13A5-BR PG 13 /
CF13A6-BR 13.5
CF13A7-BR
CF13A8-BR
CF13A9-BR
CF13AP-BR
3
6
3
2
3
2
2
2
2
2.0
.08
3.0
.12
4.0
.16
5.0
.20
3.0
.12
5.2
.20
3.8
.15
4.2
.17
2.5
.10
Solid Insert
1.089.1300.19
1.089.1301.19
1.089.1302.19
1.089.1303.19
1.089.1304.19
1.089.1305.19
1.089.1306.19
1.089.1307.19
1.089.1308.19
1.089.1399.19
CF16A1-BR
CF16A2-BR
CF16A3-BR
CF16A4-BR
CF16A5-BR
CF16A6-BR
CF16A7-BR
CF16A8-BR
CF16A9-BR
CF16A0-BR
CF16AP-BR
3
3
4
5
6
2
3
6
*4
6
3.0
.12
4.0
.16
4.0
.16
4.0
.16
4.0
.16
6.0
.24
5.6
.22
3.0
.12
3.0
.12
3.8
.15
Solid Insert
1.089.1600.19
1.089.1601.19
1.089.1602.19
1.089.1603.19
1.089.1604.19
1.089.1605.19
1.089.1606.19
1.089.1607.19
*1.089.1610.19
1.089.1609.19
1.089.1699.19
PG 9
PG 11
PG 16
*Note: This Insert has slotted holes.
**Note: Flex Fittings are not a standard item, assembly required.
*Note: CSA and CE Approvals only applies to Dome Fittings.
Flex **
Dome
CD21A1-BR
CD21A2-BR
CD21A3-BR
CD21A4-BR
CD21A5-BR
CD21A6-BR
CD21A7-BR
CF21A1-BR
CF21A2-BR
CF21A3-BR
CF21A4-BR
CF21A5-BR
CF21A6-BR
CF21A7-BR
CD21A8-BR
CF21A8-BR
CD21A9-BR CF21A9-BR
CD21AP-BR CF21AP-BR
Thread
Dimensions in Inches (mm)
Type No. of
Diameter
Part
& Size Holes
of Holes
Numbers
of
Inserts
See page
only
49 for thread
mm Inches
specs
4
6.0
.24 1.089.2100.19
3
7.0
.28 1.089.2101.19
2
8.0
.31 1.089.2102.19
4
5.0
.20 1.089.2103.19
1
8.0
.31 1.089.2104.19
PG 21
4
5.2
.20 1.089.2105.19
3
5.2
.20 1.089.2106.19
5.2
/
4/1
3.7 .20/.15 1.089.2107.19
2
7.4
.29 1.089.2108.19
Solid Insert
1.089.2199.19
CD29A1-BR
CD29A2-BR
CD29A3-BR
CD29A9-BR
CD29AP-BR
-
CD36A1-BR
CD36A2-BR
CD36A3-BR
CD36A4-BR
CD36AP-BR
-
PG 36
CD42A1-BR
CD42AP-BR
-
PG 42
PG 29
6
4
4
2
6.5
.26
9.0
.35
9.5
.37
11
.43
Solid Insert
1.089.2900.19
1.089.2901.19
1.089.2902.19
1.089.2908.19
1.089.2999.19
5
7
6
2
9.0
.35
9.0
.35
8.0
.31
15.0
.59
Solid Insert
1.089.3600.19
1.089.3601.19
1.089.3602.19
1.089.3603.19
1.089.3699.19
3
14.0
.55
Solid Insert
1.089.4203.19
1.089.4299.19
CD48A1-BR
8
10.0
.39 1.089.4800.19
CD48A2-BR
6
12.0
.47 1.089.4801.19
PG 48
CD48A3-BR
3
18.0
.71 1.089.4802.19
CD48AP-BR
Solid Insert
1.089.4899.19
For Strain Relief Fitting specifications and dimensions see Page 14.
Solid Plug can be customized!
Dome Fittings also available
with the following approvals:
FPM
www.sealconex.com
Other Products / Index
Silicone
Optional Locking Nuts &
Other Accessories starting
on Page 28 - 39.
Multi-Hole Inserts are available in Silicone and FPM on request.
22
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Multi-Hole - NPT Threads
*
w w w. s e a l c o nu s a . c o m
Part Numbers
Part Numbers
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
1.089.0900.19
1.089.0901.19
1.089.0902.19
1.089.0903.19
1.089.0904.19
1.089.0905.19
1.089.0906.19
1.089.0907.19
1.089.0908.19
1.089.0999.19
CD13N1-BR
CD13N2-BR
CD13N3-BR
CD13N4-BR
CD13N5-BR
CD13N6-BR
CD13N7-BR
CD13N8-BR
CD13N9-BR
CD13NP-BR
CF13N1-BR
CF13N2-BR
CF13N3-BR
CF13N4-BR
CF13N5-BR
1/2” NPT
CF13N6-BR
CF13N7-BR
CF13N8-BR
CF13N9-BR
CF13NP-BR
3
6
3
2
3
2
2
2
2
2.0
.08
3.0
.12
4.0
.16
5.0
.20
3.0
.12
5.2
.20
3.8
.15
4.2
.17
2.5
.10
Solid Insert
1.089.1300.19
1.089.1301.19
1.089.1302.19
1.089.1303.19
1.089.1304.19
1.089.1305.19
1.089.1306.19
1.089.1307.19
1.089.1308.19
1.089.1399.19
CD16N1-BR
CD16N2-BR
CD16N3-BR
CD16N4-BR
CD16N5-BR
CD16N6-BR
CD16N7-BR
CD16N8-BR
CD16N9-BR
CD16N0-BR
CD16NP-BR
CF16N1-BR
CF16N2-BR
CF16N3-BR
CF16N4-BR
CF16N5-BR
1/2” NPT
CF16N6-BR
(Enlarged)
CF16N7-BR
CF16N8-BR
CF16N9-BR
CF16N0-BR
CF16NP-BR
3
3
4
5
6
2
3
6
*4
6
3.0
.12
4.0
.16
4.0
.16
4.0
.16
4.0
.16
6.0
.24
5.6
.22
3.0
.12
3.0
.12
3.8
.15
Solid Insert
1.089.1600.19
1.089.1601.19
1.089.1602.19
1.089.1603.19
1.089.1604.19
1.089.1605.19
1.089.1606.19
1.089.1607.19
*1.089.1610.19
1.089.1609.19
1.089.1699.19
CD21N8-BR CF21N8-BR
CD21N9-BR CF21N9-BR
CD21NP-BR CF21NP-BR
CD29N1-BR
6
6.5
.26 1.089.2900.19
CD29N2-BR
4
9.0
.35 1.089.2901.19
CD29N3-BR
1” NPT
4
9.5
.37 1.089.2902.19
CD29N9-BR
2
11
.43 1.089.2908.19
CD29NP-BR
Solid Insert
1.089.2999.19
For Strain Relief Fitting specifications and dimensions see Page 14.
Optional Locking Nuts & Other
Accessories starting on Page
28 - 39.
Conduit System
1.4
.06
3.0
.12
1.6
.06
1.7
.07
1.4
.06
1.4
.06
1.7
.07
1.7
.07
2.3
.09
Solid Insert
CF21N1-BR
CF21N2-BR
CF21N3-BR
CF21N4-BR
CF21N5-BR
CF21N6-BR
CF21N7-BR
Adapter,Reducer,Enlarger
4
2
5
2
10
6
3
4
4
CD21N1-BR
CD21N2-BR
CD21N3-BR
CD21N4-BR
CD21N5-BR
CD21N6-BR
CD21N7-BR
Dome Fittings also available
with the following approvals:
*Note: This Insert has slotted holes.
**Note: Flex Fittings are not a standard item, assembly required.
*Note: CSA and CE Approvals only applies to Dome Fittings.
Accessories
CF09N1-BR
CF09N2-BR
CF09N3-BR
CF09N4-BR
CF09N5-BR
3/8” NPT
CF09N6-BR
CF09N7-BR
CF09N8-BR
CF09N9-BR
CF09NP-BR
Flex
PVDF / Steel
CD09N1-BR
CD09N2-BR
CD09N3-BR
CD09N4-BR
CD09N5-BR
CD09N6-BR
CD09N7-BR
CD09N8-BR
CD09N9-BR
CD09NP-BR
**
Dome
Thread
Dimensions in Inches (mm)
Type No. of
Diameter
Part
& Size Holes
of Holes
Numbers
of
Inserts
See page
only
49 for thread
mm Inches
specs
4
6.0
.24 1.089.2100.19
3
7.0
.28 1.089.2101.19
2
8.0
.31 1.089.2102.19
4
5.0
.20 1.089.2103.19
1
8.0
.31 1.089.2104.19
3/4” NPT 4
5.2
.20 1.089.2105.19
3
5.2
.20 1.089.2106.19
5.2
/
4/1
3.7 .20/.15 1.089.2107.19
2
7.4
.29 1.089.2108.19
Solid Insert
1.089.2199.19
Nickel Plated Brass
Thread
Dimensions in Inches (mm)
Type No. of
Diameter
Part
& Size Holes
of Holes
Numbers
of
Inserts
See page
only
49 for thread
**
specs
Dome
Flex
mm Inches
PG 7 /
CD07AP-BR CF07AP-BR
Solid Insert
1.089.0799.19
1/4” NPT
Nylon Strain Relief
*
www.sealconex.com
Custom Solutions!
Any special insert hole or profile configuration is available for a minimum order of 1,000 pieces.
No Charge Manufacturing Fee - In 12-14 weeks or a one time Expedite Fee reducing manufacturing to 6-8 weeks.
Technical Information
•
•
For small quantities we suggest drilling or machining the inserts yourself, following these guidelines:
•
•
•
•
•
Important:
Design Parameters: Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed
.04” (1 mm). The Multi Cable fittings will meet NEMA 4x = IP65 if the design parameters are complied with.
To verify a submersible NEMA 6= IP68 application, the final assembly of cables and fittings must be tested by the customer or submitted at the customer’s
expense to an independent test lab.
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
23
Other Products / Index
We suggest drilling the frozen solid insert.
Drill holes by using a standard high-speed steel drill bit of the proper size at approx. 2500 RPM.
Drill holes with insert installed in Strain Relief Fitting as a fixture.
Keep a minimum distance of 1 mm (.04 in) between holes.
The outside holes can be located right against the lip of the strain relief body, as sufficient insert material remains between the hole and the body wall
due to the design of the cord grip.
C
A
F
•
•
•
•
•
Im
D
d
a
T
s
Nylon Strain Relief
Nickel Plated Brass
PVDF / Steel
Accessories
Adapter,Reducer,Enlarger
Conduit System
Technical Information
Other Products / Index
*
Nickel
NickelPlated
PlatedBrass
BrassLiquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Multi-Hole - Metric Threads
*
w w w. s e a l c o nu s a . c o m
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Dome
Flex
**
Thread
Type
& Size
Dimensions in Inches (mm)
No. of
Holes
See page
49 for thread
specs
mm
CD12MP-BR CF12MP-BR M12 x 1.5
CD16M1-BR
CD16M2-BR
CD16M3-BR
CD16M4-BR
CD16M5-BR
CD16M6-BR
CD16M7-BR
CD16M8-BR
CD16M9-BR
CD16MP-BR
CF16M1-BR
CF16M2-BR
CF16M3-BR
CF16M4-BR
CF16M5-BR
M16 x 1.5
CF16M6-BR
CF16M7-BR
CF16M8-BR
CF16M9-BR
CF16MP-BR
Diameter
of Holes
4
2
5
2
10
6
3
4
4
Part
Numbers
of
Inserts
only
Inches
Solid Insert
1.089.0799.19
1.4
.06
3.0
.12
1.6
.06
1.7
.07
1.4
.06
1.4
.06
1.7
.07
1.7
.07
2.3
.09
Solid Insert
1.089.0900.19
1.089.0901.19
1.089.0902.19
1.089.0903.19
1.089.0904.19
1.089.0905.19
1.089.0906.19
1.089.0907.19
1.089.0908.19
1.089.0999.19
CD17M1-BR
CD17M2-BR
CD17M3-BR
CD17M4-BR
CD17M5-BR
CD17MP-BR
CF17M1-BR
CF17M2-BR
CF17M3-BR M16 x 1.5
CF17M4-BR (Enlarged)
CF17M5-BR
CF17MP-BR
2
3
2
3
4
3.0
.12
3.0
.12
4.0
.16
1.5
.06
2.8
.11
Solid Insert
1.089.1100.19
1.089.1101.19
1.089.1102.19
1.089.1103.19
1.089.1104.19
1.089.1199.19
CD20M1-BR
CD20M2-BR
CD20M3-BR
CD20M4-BR
CD20M5-BR
CD20M6-BR
CD20M7-BR
CD20M8-BR
CD20M9-BR
CD20MP-BR
CF20M1-BR
CF20M2-BR
CF20M3-BR
CF20M4-BR
CF20M5-BR
M20 x 1.5
CF20M6-BR
CF20M7-BR
CF20M8-BR
CF20M9-BR
CF20MP-BR
3
6
3
2
3
2
2
2
2
2.0
.08
3.0
.12
4.0
.16
5.0
.20
3.0
.12
5.2
.20
3.8
.15
4.2
.17
2.5
.10
Solid Insert
1.089.1300.19
1.089.1301.19
1.089.1302.19
1.089.1303.19
1.089.1304.19
1.089.1305.19
1.089.1306.19
1.089.1307.19
1.089.1308.19
1.089.1399.19
CD22M1-BR
CD22M2-BR
CD22M3-BR
CD22M4-BR
CD22M5-BR
CD22M6-BR
CD22M7-BR
CD22M8-BR
CD22M9-BR
CD22M0-BR
CD22MP-BR
CF22M1-BR
CF22M2-BR
CF22M3-BR
CF22M4-BR
CF22M5-BR
M20 x 1.5
CF22M6-BR
(Enlarged)
CF22M7-BR
CF22M8-BR
CF22M9-BR
CF22M0-BR
CF22MP-BR
3
3
4
5
6
2
3
6
*4
6
3.0
.12
4.0
.16
4.0
.16
4.0
.16
4.0
.16
6.0
.24
5.6
.22
3.0
.12
3.0
.12
3.8
.15
Solid Insert
1.089.1600.19
1.089.1601.19
1.089.1602.19
1.089.1603.19
1.089.1604.19
1.089.1605.19
1.089.1606.19
1.089.1607.19
*1.089.1610.19
1.089.1609.19
1.089.1699.19
*Note: This Insert has slotted holes.
**Note: Flex Fittings are not a standard item, assembly required.
*Note: CSA and CE Approvals only applies to Dome Fittings.
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
**
Dome
Flex
CD25M1-BR
CD25M2-BR
CD25M3-BR
CD25M4-BR
CD25M5-BR
CD25M6-BR
CD25M7-BR
CF25M1-BR
CF25M2-BR
CF25M3-BR
CF25M4-BR
CF25M5-BR
CF25M6-BR
CF25M7-BR
CD25M8-BR CF25M8-BR
CD25M9-BR CF25M9-BR
CD25MP-BR CF25MP-BR
Thread
Dimensions in Inches (mm)
Type
No. of
Diameter
Part
& Size
Holes
of Holes
Numbers
of
Inserts
See page
only
49 for thread
mm Inches
specs
4
6.0
.24 1.089.2100.19
3
7.0
.28 1.089.2101.19
2
8.0
.31 1.089.2102.19
4
5.0
.20 1.089.2103.19
1
8.0
.31 1.089.2104.19
M25 x
4
5.2
.20 1.089.2105.19
1.5
3
5.2
.20 1.089.2106.19
5.2
/
4/1
3.7 .20/.15 1.089.2107.19
2
7.4
.29 1.089.2108.19
Solid Insert
1.089.2199.19
CD32M1-BR
CD32M2-BR
CD32M3-BR
CD32MP-BR
-
CD40M1-BR
CD40M2-BR
CD40M3-BR
CD40M4-BR
CD40MP-BR
-
M40 x
1.5
CD50M1-BR
CD50MP-BR
-
M50 x
1.5
M32 x
1.5
6
4
4
6.5
.26
9.0
.35
9.5
.37
Solid Insert
1.089.2900.19
1.089.2901.19
1.089.2902.19
1.089.2999.19
5
7
6
2
9.0
.35
9.0
.35
8.0
.31
15.0
.59
Solid Insert
1.089.3600.19
1.089.3601.19
1.089.3602.19
1.089.3603.19
1.089.3699.19
3
14.0
.55
Solid Insert
1.089.4203.19
1.089.4299.19
CD63M1-BR
8
10.0
.39 1.089.4800.19
CD63M2-BR
6
12.0
.47 1.089.4801.19
M63 x
1.5
CD63M3-BR
3
18.0
.71 1.089.4802.19
CD63MP-BR
Solid Insert
1.089.4899.19
For Strain Relief Fitting specifications and dimensions see Page 14.
Optional Locking Nuts & Other
Accessories starting on Page
28 - 39.
Dome Fittings also available
with the following approvals:
www.sealconex.com
Dome Opening
Insert
How to feed a cable assembly with plug through a strain relief fitting:
Strain Relief
1. Determine largest dimension of the plug.
2. Choose Strain Relief with appropriate Dome opening (see table on
Page 48).
3. Drill solid insert to exact cable diameter & slice insert on one side only.
4. Snap insert over cable and insert into body, tighten dome nut.-Done!
5. This applies to PG, NPT or Metric solutions.
24
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Dome Nut
Plug
*
*
*
*
*
PVDF Liquid Tight Strain Relief Fittings
Hi/Low Temp. Chemical Resistant - PG/NPT/Metric
**
w w w. s e a l c o nu s a . c o m
PVDF Body w/ FPM Insert: High/Low Temperature & Chemical Resistant
Part Numbers
Cable Range
Thread Type
& Size
-31 ºF to 302 ºF (-35 ºC to 150 ºC)
Inches (mm)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
CD12MA-TE
CD12MR-TE
CD16MA-TE
CD16MR-TE
CD20MA-TE
CD20MR-TE
CD25MA-TE
CD25MR-TE
CD32MA-TE
CD32MR-TE
CF12MA-TE
CF12MR-TE
CF16MA-TE
CF16MR-TE
CF20MA-TE
CF20MR-TE
-
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
See page
49 for thread
specs
(+.25 mm)
PG7 / 1/4” NPT
.49 (12.5)
.83 (21)
2.13 (54)
.31 (8)
.59 (15)
PG 9
.60 (15.2)
.87 (22)
2.48 (63)
.31 (8)
.75 (19)
PG 11
.73 (18.5)
.98 (25)
-
.31 (8)
.87 (22)
PG 13 / 13.5
.80 (20.3)
1.06 (27)
3.54 (90)
.35 (9)
.94 (24)
PG 16
.89 (22.5)
1.10 (28)
-
.39 (10)
1.06 (27)
PG 21
1.12 (28.4)
1.22 (31)
-
.43 (11)
1.30 (33)
PG 29
1.47 (37.3)
1.54 (39)
-
.43 (11)
1.65 (42)
PG 36
1.85 (47)
1.89 (48)
-
.51 (13)
2.09 (53)
PG 42
2.13 (54.1)
1.93 (49)
-
.51 (13)
2.36 (60)
PG 48
2.34 (59.4)
1.93 (49)
-
.55 (14)
2.56 (65)
3/8” NPT
.68 (17.2)
.87 (22)
2.13 (54)
.59 (15)
.75 (19) /
.87 (22)
1/2” NPT
.83 (21.1)
1.06 (27)
2.48 (63)
.51 (13)
.94 (24)
1/2”-E NPT
.83 (21.1)
1.10 (28)
-
.51 (13)
1.06 (27)
3/4” NPT
1.05 (26.7)
1.22 (31)
-
.55 (14)
1.30 (33)
M12 x 1.5
.47 (12)
.83 (21)
2.13 (54)
.31 (8)
.59 (15)
M16 x 1.5
.63 (16)
.87 (22)
2.48 (63)
.31 (8)
.75 (19)
M20 x 1.5
.79 (20)
1.06 (27)
3.54 (90)
.35 (9)
.94 (24)
M25 x 1.5
.98 (25)
1.22 (31)
-
.43 (11)
1.30 (33)
M32 x 1.5
1.26 (32)
1.54 (39)
-
.43 (11)
1.65 (42)
*Note: UL, CSA, PCT, UR, CE, and German Lloyd Approvals apply to Dome Fittings.
**Note: VDE Approval applies to Dome Fittings with Metric Thread.
**Note: Flex Fittings are not a standard item, assembly required.
F1/F
Typical Application:
B
Food & Beverage Industries
Clean Room Applications
High Temperature Applications
V0 Rated
F1/F
D
A
C
Other Products / Index
•
•
•
•
+ .01”
D
Suggested Clearance
Hole for Non-Threaded
Mounting
PVDF Body
FPM Insert
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Technical Information
CF09NA-TE
CF09NR-TE
CF13NA-TE
CF13NR-TE
-
F1/F
Wrench
Flats
Conduit System
CD09NA-TE
CD09NR-TE
CD13NA-TE
CD13NR-TE
CD16NA-TE
CD16NR-TE
CD21NA-TE
CD21NR-TE
D
Thread
Length
Adapter,Reducer,Enlarger
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
1.14 - 1.38 (29 - 35)
C
Body
Length
(Flex)
Accessories
CF07AA-TE
CF07AR-TE
CF09AA-TE
CF09AR-TE
CF13AA-TE
CF13AR-TE
-
B
Body
Length
(Dome)
PVDF / Steel
CD07AA-TE
CD07AR-TE
CD09AA-TE
CD09AR-TE
CD11AA-TE
CD11AR-TE
CD13AA-TE
CD13AR-TE
CD16AA-TE
CD16AR-TE
CD21AA-TE
CD21AR-TE
CD29AA-TE
CD29AR-TE
CD36AA-TE
CD36AR-TE
CD42AA-TE
CD42AR-TE
CD48AA-TE
CD48AR-TE
A
Clearance
Hole
Nickel Plated Brass
Flex **
Dome
Dimensions in Inches (mm)
Nylon Strain Relief
*
25
Nylon Strain Relief
LiquidBrass
Tight w/
Strain
Relief
Fittings
Nickel Plated
PVDF
- Strain
Relief Fittings
PG/NPT/Metric & Elongated Threads
*
w w w. s e a l c o nu s a . c o m
PVDF Spline w/ FPM Insert: High/Low Temperature & Chemical Resistant
Part Numbers
Cable Range
Thread
Type
& Size
See page
49 for thread
specs
Inches (mm)
Standard
Elongated
CD07AA-RV
CD07AR-RV
CD09AA-RV
CD09AR-RV
CD11AA-RV
CD11AR-RV
CD13AA-RV
CD13AR-RV
CD16AA-RV
CD16AR-RV
CD21AA-RV
CD21AR-RV
CD29AA-RV
CD29AR-RV
CD36AA-RV
CD36AR-RV
CD42AA-RV
CD42AR-RV
CD48AA-RV
CD48AR-RV
CD07CA-RV
CD07CR-RV
CD09CA-RV
CD09CR-RV
CD11CA-RV
CD11CR-RV
CD13CA-RV
CD13CR-RV
CD16CA-RV
CD16CR-RV
CD21CA-RV
CD21CR-RV
CD29CA-RV
CD29CR-RV
CD36CA-RV
CD36CR-RV
CD42CA-RV
CD42CR-RV
CD48CA-RV
CD48CR-RV
CD09NA-RV
CD09NR-RV
CD13NA-RV
CD13NR-RV
CD21NA-RV
CD21NR-RV
-
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
CD12MA-RV
CD12MR-RV
CD16MA-RV
CD16MR-RV
CD17MA-RV
CD17MR-RV
CD20MA-RV
CD20MR-RV
CD22MA-RV
CD22MR-RV
CD25MA-RV
CD25MR-RV
CD32MA-RV
CD32MR-RV
CD40MA-RV
CD40MR-RV
CD12DA-RV
CD12DR-RV
CD16DA-RV
CD16DR-RV
CD17DA-RV
CD17DR-RV
CD20DA-RV
CD20DA-RV
CD22DA-RV
CD22DR-RV
CD25DA-RV
CD25DR-RV
CD32DA-RV
CD32DR-RV
CD40DA-RV
CD40DR-RV
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
.12 - .26 (3 - 6.5)
PG 7 /
1/4” NPT
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
PG 9
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
PG 11
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
PG 13 /
13.5
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
PG 16
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
PG 21
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
PG 29
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
PG 36
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
PG 42
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
PG 48
1.14 - 1.38 (29 - 35)
A
B
D
D
F1/F
Clearance
Hole
Body
Length
Thread
Length
Thread
Length
Wrench
Flats
Standard
Elongated
+ .01”
(+.25 mm)
.49 (12.5)
.75 (19)
.20 (5)
.39 (10)
.55 (14)
.60 (15.2)
.83 (21)
.24 (6)
.39 (10)
.67 (17)
.73 (18.5)
.87 (22)
.24 (6)
.39 (10)
.79 (20)
.80 (20.3)
.94 (24)
.26 (6.5)
.39 (10)
.87 (22)
.89 (22.5)
.91 (23)
.26 (6.5)
.39 (10)
.94 (24)
1.12 (28.4)
.94 (24)
.28 (7)
.47 (12)
1.18 (30)
1.47 (37.3) 1.14 (29)
.31 (8)
.47 (12)
1.57 (40)
1.38 (35)
.31 (8)
.59 (15)
1.97 (50)
2.13 (54.1) 1.46 (37)
.35 (9)
.59 (15)
2.24 (57)
2.34 (59.4) 1.50 (38)
.39 (10)
.59 (15)
2.52 (64)
3/8” NPT
.68 (17.2)
.83 (21)
.59 (15)
-
1/2” NPT
.83 (21.1)
.94 (24)
.51 (13)
-
3/4” NPT 1.05 (26.7)
.98 (25)
.51 (13)
-
1.18 (30)
M12 x 1.5
.47 (12)
.75 (19)
.26 (6.5)
.39 (10)
.55 (14)
M16 x 1.5
.63 (16)
.83 (21)
.24 (6)
.39 (10)
.67 (17) /
.75 (19)
M16 x 1.5
.63 (16)
.87 (22)
.24 (6)
.39 (10)
.79 (20)
M20 x 1.5
.79 (20)
.91 (23)
.24 (6)
.39 (10)
.87 (22)
M20 x 1.5
.79 (20)
.94 (24)
.24 (6)
.39 (10)
.94 (24)
M25 x 1.5
.98 (25)
1.02 (26)
.28 (7)
.47 (12)
1.18 (30)
M32 x 1.5
1.26 (32)
1.22 (31)
.31 (8)
.47 (12)
1.57 (40)
M40 x 1.5
1.57 (40)
1.46 (37)
.31 (8)
.59 (15)
1.97 (50)
1.85 (47)
D
B
A
Suggested Clearance
Hole for Non-Threaded
Mounting
.67 (17) /
.75 (19)
.87 (22) /
.94 (24)
*Note: VDE Approval only applies to Fittings with Metric Threads.
Dome Fittings also available
with the following approvals:
Other Products / Index
Technical Information
Conduit System
Adapter,Reducer,Enlarger
Accessories
PVDF / Steel
Nickel Plated Brass
-31 ºF to 302 ºF (-35 ºC to 150 ºC)
F1/F
Dimensions in Inches (mm)
www.sealconex.com
Typical Application:
• High Performance
• Extreme Temperatures
• Sturdy
FPM Insert
26
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
PVDF
Clamping Spline
FPM O-Ring
w w w. s e a l c o nu s a . c o m
**
*
(303) Stainless Steel: High Performance, High/Low Temp. & Corrosion Resistant
Part Numbers
-31 ºF to 302 ºF
(-35 ºC to 150 ºC)
Standard
PVDF
Cable Range
Thread
Type
& Size
Dimensions in Inches (mm)
A
B
D
F1/F
Clearance
Body
Length
Thread
Length
Wrench
Flats
Hole
w/ Buna-N Insert w/ FPM Insert
Inches (mm)
See page
49 for thread
specs
CD12MA-SV
CD12MR-SV
CD16MA-SV
CD16MR-SV
CD20MA-SV
CD20MR-SV
CD25MA-SV
CD25MR-SV
CD32MA-SV
CD32MR-SV
CD40MA-SV
CD40MR-SV
CD50MA-SV
CD50MR-SV
CD63MA-SV
CD63MR-SV
.12 - .26 (3 - 6.5)
.08 - .20 (2 - 5)
.20 - .39 (5 - 10)
.12 - .28 (3 - 7)
.39 - .55 (10 - 14)
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
1.14 - 1.38 (29 - 35)
.75 (19)
.20 (5)
.55 (14)
.60 (15.2)
.83 (21)
.24 (6)
.67 (17)
.73 (18.5)
.87 (22)
.24 (6)
.87 (22)
.80 (20.3)
.94 (24)
.26 (6.5)
.87 (22)
.89 (22.5)
.91 (23)
.26 (6.5)
.94 (24)
1.12 (28.4)
.94 (24)
.28 (7)
1.18 (30)
1.47 (37.3)
1.14 (29)
.31 (8)
1.61 (41)
1.85 (47)
1.38 (35)
.31 (8)
1.97 (50)
2.13 (54.1)
1.46 (37)
.35 (9)
2.24 (57)
2.34 (59.4)
1.50 (38)
.39 (10)
2.52 (64)
M12 x 1.5
.47 (12)
.75 (19)
.26 (6.5)
.55 (14)
M16 x 1.5
.63 (16)
.87 (22)
.24 (6)
.87 (22)
M20 x 1.5
.79 (20)
.91 (23)
.24 (6)
.94 (24)
M25 x 1.5
.98 (25)
.94 (24)
.28 (7)
1.18 (30)
M32 x 1.5
1.26 (32)
1.22 (31)
.31 (8)
1.61 (41)
B
A
M40 x 1.5
1.57 (40)
1.46 (37)
.31 (8)
1.97 (50)
M50 x 1.5
1.97 (50)
1.46 (37)
.35 (9)
2.36 (60)
M63 x 1.5
2.48 (63)
1.50 (38)
.39 (10)
2.52 (64) /
2.68 (68)
*Note: CSA and CE Approvals only applies to Standard Fittings.
F1/F
Stainless Steel
(303), Nickel
Plated Brass &
Nylon Locking
Nuts and Other Accessories
available on page 28 & 29.
Dome Fittings also available
with the following approvals:
www.sealconex.com
(303) INOX Stainless Steel also
available in NPT Threads upon
request.
FPM
Insert
**Note: VDE Approval only applies to Fittings with Metric Threads.
PVDF
Clamping
Spine
(316L) Stainless Steel: High Performance, High/Low Temp. & Corrosion Resistant
w/ Buna-N Insert w/ FPM Insert
CD09NA-6V
CD09NR-6V
CD13NA-6V
CD13NR-6V
CD21NA-6V
CD21NR-6V
Inches (mm)
.16 - .31 (4 - 8)
.08 - .24 (2 - 6)
.24 - .47 (6 - 12)
.20 - .35 (5 - 9)
.51 - .71 (13 - 18)
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
.51 - .79 (13 - 20)
Thread
Type
& Size
Dimensions in Inches (mm)
A
B
D
F1/F
Clearance
Hole
Body
Length
Thread
Length
Wrench
Flats
See page
49 for thread
specs
+ .01”
+.25 mm)
3/8” NPT
.68 (17.2)
.83 (21)
.59 (15)
1/2” NPT
.83 (21.1)
.94 (24)
.51 (13)
3/4” NPT
1.05 (26.7)
.98 (25)
.51 (13)
1.18 (30)
1” NPT
1.35 (34.3)
1.14 (29)
.75 (19)
1.61 (41)
(316L) INOX Stainless Steel also available in PG and Metric Threads upon request.
The 316L material is much harder
and ideal for direct exposure to salt
water and chemical solutions in
marine, off-shore, pharmaceutical,
etc.
Wash
w
No able!
il
Ava
Down
(IP69K)
.67 (17) /
.75 (19)
.87 (22) /
.94 (24)
See the latest
information on the back
cover of catalog or online!
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Other Products / Index
CD09NA-6S
CD09NR-6S
CD13NA-6S
CD13NR-6S
CD21NA-6S
CD21NR-6S
CD29NA-6S
CD29NR-6S
Cable Range
-31 ºF to 302 ºF
(-35 ºC to 150 ºC)
PVDF
Technical Information
Part Numbers
-40 ºF to 212 ºF
(-40 ºC to 100 ºC)
Standard
D
Suggested Clearance
Hole for Non-Threaded
Mounting
Conduit System
CD12MA-SS
CD12MR-SS
CD16MA-SS
CD16MR-SS
CD20MA-SS
CD20MR-SS
CD25MA-SS
CD25MR-SS
CD32MA-SS
CD32MR-SS
CD40MA-SS
CD40MR-SS
CD50MA-SS
CD50MR-SS
CD63MA-SS
CD63MR-SS
.49 (12.5)
Off-shore
Marine
Chemical Plants
Food Processing
Clean Room
Other Rugged
Applications
Adapter,Reducer,Enlarger
.12 - .26 (3 - 6.5)
PG 7
.08 - .20 (2 - 5)
.16 - .31 (4 - 8)
PG 9
.08 - .24 (2 - 6)
.20 - .39 (5 - 10)
PG 11
.12 - .28 (3 - 7)
.24 - .47 (6 - 12)
PG 13 / 13.5
.20 - .35 (5 - 9)
.39 - .55 (10 - 14)
PG 16
.28 - .47 (7 - 12)
.51 - .71 (13 - 18)
PG 21
.35 - .63 (9 - 16)
.71 - .98 (18 - 25)
PG 29
.51 - .79 (13 - 20)
.87 - 1.26 (22 - 32)
PG 36
.79 - 1.02 (20 - 26)
1.26 - 1.50 (32 - 38)
PG 42
.98 - 1.22 (25 - 31)
1.46 - 1.73 (37 - 44)
PG 48
1.14 - 1.38 (29 - 35)
•
•
•
•
•
•
Accessories
CD07AA-SV
CD07AR-SV
CD09AA-SV
CD09AR-SV
CD11AA-SV
CD11AR-SV
CD13AA-SV
CD13AR-SV
CD16AA-SV
CD16AR-SV
CD21AA-SV
CD21AR-SV
CD29AA-SV
CD29AR-SV
CD36AA-SV
CD36AR-SV
CD42AA-SV
CD42AR-SV
CD48AA-SV
CD48AR-SV
(+.25 mm)
PVDF / Steel
CD07AA-SS
CD07AR-SS
CD09AA-SS
CD09AR-SS
CD11AA-SS
CD11AR-SS
CD13AA-SS
CD13AR-SS
CD16AA-SS
CD16AR-SS
CD21AA-SS
CD21AR-SS
CD29AA-SS
CD29AR-SS
CD36AA-SS
CD36AR-SS
CD42AA-SS
CD42AR-SS
CD48AA-SS
CD48AR-SS
+ .01”
Nickel Plated Brass
-40 ºF to 212 ºF
(-40 ºC to 100 ºC)
Stainless Steel Strain
Relief Fittings can be
used in many applications,
where the environment
dictates a corrosion proof
solution.
Typical Application:
Nylon Strain Relief
Stainless Liquid
Steel - Tight
LiquidStrain
Tight Relief
StrainFittings
Relief Fittings
(303 & 316L) INOX - PG/Metric & NPT Threads
*
27
Nylon Strain Relief
Accessories for Strain Relief Fittings
Summary
w w w. s e a l c o nu s a . c o m
Page 29 - Locking Nuts
Locking Nuts - Page 28
EMI/RFI Proof (Nickel Plated Brass) •
Zinc Plated Steel •
Stainless Steel (303) - INOX •
• Black & Gray Nylon
• Nickel Plated Brass
Page 30 - Seal Rings
Nickel Plated Brass
O-Rings - Page 30
• Buna-N
• FPM
• Silicone
Polyethylene •
Fiber-Reinforced Plastic •
Page 30/33 - Blind Plug/Clamp
Hole Plug - Page 31-32
Dome Plugs:
• Black & Gray Nylon
• Nickel Plated Brass
Hex Plugs:
• Black Nylon
• Nickel Plated Brass
• Stainless Steel
Blind Plugs:
• Black Nylon
PVDF / Steel
Wrenches - Page 33
Page 34-35 - Thread Adapters
Converts a Type of (NPT, PG, Metric) Threads
Black Nylon •
Nickel Plated Brass •
• Deep Socket Wrenches
Thread Reducers - Page 36-38
Page 39 - Thread Enlargers
Enlarges a Type of (NPT, PG, Metric) Threads
Black Nylon •
Nickel Plated Brass •
Accessories
Reduces a Type of (NPT, PG, Metric) Thread
• Gray Nylon
• Black Nylon
• Nickel Plated Brass
• Stainless Steel
Accessories - Locking Nuts
Nylon & Nickel Plated Brass - PG/NPT/Metric
*
Part Numbers
Conduit System
Adapter,Reducer,Enlarger
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Technical Information
Other Products / Index
Nickel Plated Brass: Locking Nuts
Nylon: Black & Gray Locking Nuts*
Black
Gray
NP-07-BK
NP-09-BK
NP-11-BK
NP-07-GY
NP-09-GY
NP-11-GY
NP-13-BK
NP-13-GY
Thread
Type
& Size
Part Numbers
Dimensions in Inches (mm)
G
H
Thickness
Wrench
Flats
See page
49 for thread
specs
Thread
Type
& Size
Dimensions in Inches (mm)
G
H
Thickness
Wrench
Flats
.11 (2.8)
.11 (2.8)
.12 (3)
.59 (15)
.71 (18)
.83 (21)
NP-16-BR
NP-21-BR
NP-29-BR
NP-36-BR
NP-42-BR
NP-48-BR
PG 7
PG 9
PG 11
PG 13 /
13.5
PG 16
PG 21
PG 29
PG 36
PG 42
PG 48
See page
49 for thread
specs
Nickel Plated Brass
Nylon Locking Nuts
NP-07-BR
NP-09-BR
NP-11-BR
NP-16-BK
NP-21-BK
NP-29-BK
NP-36-BK
NP-42-BK
NP-48-BK
NP-16-GY
NP-21-GY
NP-29-GY
NP-36-GY
NP-42-GY
NP-48-GY
PG 7
PG 9
PG 11
PG 13 /
13.5
PG 16
PG 21
PG 29
PG 36
PG 42
PG 48
NN-09-BK
NN-13-BK
NN-21-BK
NN-29-BK
NN-09-GY
NN-13-GY
NN-21-GY
NN-29-GY
3/8” NPT
1/2” NPT
3/4” NPT
1” NPT
.28 (7)
.24 (6)
.28 (7)
.28 (7)
.94 (24)
1.06 (27)
1.26 (32)
1.57 (40)
NN-09-BR
NN-13-BR
NN-21-BR
NN-29-BR
3/8” NPT
1/2” NPT
3/4” NPT
1” NPT
.14 (3.5)
.12 (3)
.14 (3.5)
.14 (3.5)
.75 (19)
.94 (24)
1.18 (30)
1.38 (35)
NM-12-BK
NM-16-BK
NM-20-BK
NM-25-BK
NM-32-BK
NM-40-BK
NM-50-BK
NM-63-BK
NM-12-GY
NM-16-GY
NM-20-GY
NM-25-GY
NM-32-GY
NM-40-GY
NM-50-GY
NM-63-GY
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.20 (5)
.20 (5)
.24 (6)
.26 (6.5)
.28 (7)
.28 (7)
.31 (8)
.31 (8)
.67 (17)
.87 (22)
1.06 (27)
1.26 (32)
1.61 (41)
1.97 (50)
2.36 (60)
2.95 (75)
NM-06-BR
NM-08-BR
NM-10-BR
NM-12-BR
NM-16-BR
NM-20-BR
NM-25-BR
NM-32-BR
NM-40-BR
NM-50-BR
NM-63-BR
M6 x 1.0
M8 x 1.25
M10 x 1.5
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.10 (2.5)
.10 (2.5)
.11 (2.8)
.11 (2.8)
.11 (2.8)
.12 (3)
.14 (3.5)
.16 (4)
.18 (4.5)
.22 (5.5)
.24 (6)
.39 (10)
.51 (13)
.51 (13)
.59 (15)
.75 (19)
.91 (23)
1.14 (29)
1.42 (36)
1.77 (45)
2.17 (55)
2.76 (70)
.20 (5)
.20 (5)
.20 (5)
.75 (19)
.87 (22)
.94 (24)
.24 (6)
1.06 (27)
.24 (6)
.28 (7)
.28 (7)
.31 (8)
.31 (8)
.31 (8)
1.18 (30)
1.41 (36)
1.81 (46)
2.36 (60)
2.56 (65)
2.76 (70)
G
Wrench
Flat (H)
NP-13-BR
Nickel Plated Brass
Locking Nuts
Nickel Plated Brass
Locking Nuts
G
Wrench Flat (H)
* V0 Rated
Additonal: Nickel Plated Brass Extra Small & Large Locking Nuts are availabe in Metric:
(M6, M8, M10, M63, M75, M80, M90, M100, M110) & BSPP: (G 2-1/2”, G 3”, G 4”)(See Page 15)
28
Cable Clamp:
Nickel Plated Brass •
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
.12 (3)
.91 (23)
.12 (3)
.14 (3.5)
.16 (4)
.20 (5)
.20 (5)
.22 (5.5)
1.02 (26)
1.26 (32)
1.61 (41)
2.01 (51)
2.36 (60)
2.52 (64)
* Note: German Lloyd only applies to Nickel Plated Brass
Locking Nuts.
w w w. s e a l c o nu s a . c o m
EMI/RFI - Nickel Plated Brass: Locking Nuts
Part Numbers
See page
49 for thread
specs
Dimensions in Inches (mm)
H
F
Thickness
Wrench
Flats
Cutting
Edge
Height
.59 (15)
.71 (18)
.83 (21)
.91 (23)
1.02 (26)
1.26 (32)
1.61 (41)
2.01 (51)
2.36 (60)
2.52 (64)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
PG 7
PG 9
PG 11
PG 13 / 13.5
PG 16
PG 21
PG 29
PG 36
PG 42
PG 48
.11 (2.8)
.11 (2.8)
.12 (3)
.12 (3)
.12 (3)
.14 (3.5)
.16 (4)
.20 (5)
.20 (5)
.22 (5.5)
NN-13-BE
1/2” NPT
.12 (3)
NM-12-BE
NM-16-BE
NM-20-BE
NM-25-BE
NM-32-BE
NM-40-BE
NM-50-BE
NM-63-BE
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.11 (2.8)
.11 (2.8)
.12 (3)
.14 (3.5)
.18 (4.5)
.20 (5)
.20 (5)
.24 (6)
.94 (24) .028 (0.7)
.59 (15)
.75 (19)
.94 (24)
1.18 (30)
1.42 (36)
1.81 (46)
2.36 (60)
2.76 (70)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
.028 (0.7)
EMI /RFI Proof
Lockin Nut with
Cutting Edges
EMI Nickel Plated Brass
Locking Nuts
G
F
Wrench Flat (H)
Zinc Plated Steel: Locking Nuts
Part Numbers
Thread
Type
& Size
Zinc Plated Steel
See page
49 for thread
specs
NN-10-ST
NN-34-ST
NN-36-ST
1” NPT
1-1/4” NPT
1-1/2” NPT
Dimensions in Inches (mm)
G
H
Thickness
Wrench
Flats
.24 (6)
.20 (5)
.16 (4)
1.73 (44)
2.01 (53)
2.19 (55.5)
Accessories
NP-07-BE
NP-09-BE
NP-11-BE
NP-13-BE
NP-16-BE
NP-21-BE
NP-29-BE
NP-36-BE
NP-42-BE
NP-48-BE
PVDF / Steel
G
Nickel Plated Brass
Nickel Plated Brass
w/ Cutting Edges
Thread
Type
& Size
These Locking Nuts have cutting edges which will slice through
paint coatings on a metal enclosure to ensure grounding. Also,
these Locking Nuts are suitable for vibrating applications.
Nylon Strain Relief
Accessories - Locking Nuts - Zinc Plated Steel,
Nickel Plated Brass, Stainless Steel - PG/NPT/Metric
Note: BE-Locknuts have the following approvals: CE & German Lloyd.
Wrench
Flat (H)
(303) Stainless Steel: Locking Nuts
Part Numbers
Thread
Type
& Size
Dimensions in Inches (mm)
G
H
Thickness
Wrench Flats
.11 (2.8)
.11 (2.8)
.12 (3)
.67 (17)
.87 (22)
.87 (22)
NP-13-SS
PG 13 / 13.5
.12 (3)
.94 (24)
NP-16-SS
NP-21-SS
NP-29-SS
NP-36-SS
PG 16
PG 21
PG 29
PG 36
.12 (3)
.14 (3.5)
.16 (4)
.20 (5)
1.06 (27)
1.26 (32)
1.61 (41)
1.97 (50)
NM-12-SS
NM-16-SS
NM-20-SS
NM-25-SS
NM-32-SS
NM-40-SS
NM-50-SS
NM-63-SS
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.11 (2.8)
.11 (2.8)
.12 (3)
.14 (3.5)
.14 (3.5)
.20 (5)
.20 (5)
.24 (6)
.59 (15)
.75 (19)
.94 (24)
1.18 (30)
1.42 (36)
1.81 (46)
2.24 (57)
2.76 (70)
Stainless Steel Locking Nuts
G
Nylon Locking Nuts
Stainless
Steel (303)
Locking Nut
Zinc Plated Steel
Locking Nut
Other Products / Index
PG 7
PG 9
PG 11
Technical Information
NP-07-SS
NP-09-SS
NP-11-SS
Nickel Plated Brass
Locking Nut
Conduit System
(303) Stainless Steel
See page
49 for thread
specs
Wrench
Flat (H)
Zinc Plated Steel
Locking Nuts
Adapter,Reducer,Enlarger
G
Typical Applications for Stainless Steel:
• Off-shore
• Marine
• Chemical Plants
• Food Processing
• Clean Room
• Other Rugged Applications
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
29
Nylon Strain Relief
Accessories - O-Rings & Seal Rings for
Strain Relief Fittings - PG/NPT/Metric Threads
w w w. s e a l c o nu s a . c o m
Part Numbers
Nickel Plated Brass
-22 ºF to 158 ºF
(-30 ºC to 70 ºC)
PVDF / Steel
Accessories
Adapter,Reducer,Enlarger
Conduit System
- 40 ºF to 572 ºF
(- 40 ºC to 300 ºC)
Thread
Type
& Size
Dimensions in
Inches (mm)
A
Polyethylene
Fiber-reinforced
Plastic
SR-07-NY
SR-09-NY
SR-11-NY
SR-07-HD
SR-09-HD
SR-11-HD
SR-13-NY
SR-13-HD
SR-16-NY
SR-21-NY
SR-29-NY
SR-36-NY
SR-42-NY
SR-48-NY
SR-16-HD
SR-21-HD
SR-29-HD
SR-36-HD
SR-42-HD
SR-48-HD
SR-38-NY
SR-18-NY
SR-34-NY
SR-10-02
SR-14-NY
-
SM-12-NY
SM-16-NY
SM-20-NY
SM-25-NY
SM-32-NY
SM-40-NY
SM-50-NY
SM-63-NY
SM-12-HD
SM-16-HD
SM-20-HD
SM-25-HD
SM-32-HD
SM-40-HD
SM-50-HD
SM-63-HD
Part Numbers
B
C
Inner
Outer
Diameter Diameter
-40 ºF to 392 ºF
(-40 ºC to 200 ºC)
- 76ºF to 482ºF
(- 60ºC to 250ºC)
Dimensions in
Inches (mm)
Height
See page
49 for thread
specs
PG 7
.49 (12.5) .65 (16.5)
PG 9
.60 (15.2) .75 (19)
PG 11 .73 (18.6) .89 (22.5)
PG 13 / .80 (20.4) .98 (25)
13.5
PG 16 .89 (22.5) 1.06 (27)
PG 21 1.11 (28.3) 1.32 (33.5)
PG 29 1.46 (37) 1.71 (43.5)
PG 36 1.85 (47) 2.17 (55)
PG 42 2.13 (54) 2.48 (63)
PG 48 2.33 (59.3) 2.72 (69)
FPM
Silicone
.06 (1.5)
.06 (1.5)
.06 (1.5)
OR-07-BN
OR-09-BN
OR-11-BN
OR-07-VT
OR-09-VT
OR-11-VT
OR-07-SI
OR-09-SI
OR-11-SI
.06 (1.5)
OR-13-BN
OR-13-VT
OR-13-SI
.06 (1.5)
.06 (1.5)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
OR-16-BN
OR-21-BN
OR-29-BN
OR-36-BN
OR-42-BN
OR-48-BN
OR-16-VT
OR-21-VT
OR-29-VT
OR-36-VT
OR-42-VT
OR-48-VT
OR-38-BN
OR-18-BN
OR-34-BN
OR-10-BN
OR-54-BN
OR-64-BN
OM-12-BN*
OM-16-BN*
OM-20-BN*
OM-25-BN
OM-32-BN
OM-40-BN
OM-50-BN
OM-63-BN
.87 (22)
.98 (25)
1.43 (36)
1.71 (43)
1.95 (49)
.06 (1.5)
.06 (1.5)
.04 (1)
.09 (2.2)
.06 (1.5)
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.63 (16)
.79 (20)
.98 (25)
1.22 (31)
1.50 (38)
1.96 (48)
2.28 (58)
2.83 (72)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
D
E
Inner
Diameter
Height
.39 (10)
.47 (12)
.63 (16)
.06 (1.5)
.06 (1.5)
.06 (1.5)
See page
49 for thread
specs
Buna-N
3/8” NPT .67 (17)
1/2” NPT .83 (21)
3/4” NPT 1.06 (27)
1” NPT 1.32 (33.5)
1-1/4” NPT .63 (41.5)
.47 (12)
.63 (16)
.79 (20)
.98 (25)
1.26 (32)
1.57 (40)
1.97 (50)
2.48 (63)
-22 ºF to 248 ºF
(-30 ºC to 120 ºC)
Thread
Type
& Size
.67 (17)
.07 (1.8)
OR-16-SI
OR-21-SI
OR-29-SI
OR-36-SI
OR-42-SI
OR-48-SI
PG 7
PG 9
PG 11
PG 13 /
13.5
PG 16
PG 21
PG 29
PG 36
PG 42
PG 48
.71 (18)
1.02 (26)
1.30 (33)
1.69 (43)
1.97 (50)
2.16 (55)
.06 (1.5)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
OR-38-VT
OR-18-VT
OR-34-VT
OR-10-VT
OR-54-VT
OR-64-VT
OR-38-SI
OR-18-SI
OR-34-SI
OR-10-SI
OR-54-SI
OR-64-SI
3/8” NPT
1/2” NPT
3/4” NPT
1” NPT
1-1/4” NPT
1-1/2” NPT
.51 (13)
.75 (19)
.87 (22)
1.14 (29)
1.50 (38)
1.77 (45)
.08 (2)
.07 (1.8)
.078 (2)
.078 (2)
.10 (2.5)
.10 (2.5)
OM-12-VT*
OM-16-VT*
OM-20-VT*
OM-25-VT
OM-32-VT
OM-40-VT
OM-50-VT
OM-63-VT
OM-12-SI*
OM-16-SI*
OM-20-SI*
OM-25-SI
OM-32-SI
OM-40-SI
OM-50-SI
OM-63-SI
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.39 (10)
.47 (12)
.67 (17)
.87 (22)
1.14 (29)
1.38 (35)
1.69 (43)
2.17 (55)
.06 (1.5)
.06 (1.5)
.07 (1.8)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
.08 (2)
If NEMA 4x or 6 (IP 68 or IP 69K - Submersible) is required, O-Rings or Seal Rings
should be used when mounting Strain Relief Fittings to a control panel, secured with *Metal Parts use different O-Rings.
Metal
a Locking Nut. The straight Strain Relief Fittings feature a molded O-Ring groove. For
O-Ring
these fittings the O-Ring is the best solution.
Groove
O-Ring
Groove
A B
The Snap Elbows and some of the Conduit Fittings don’t have a recess for
an O-Ring. In that case, the Seal Ring would be the better choice, unless the
hole can be beveled to accommodate an O-Ring.
D
or
E
C
Accessories - Strain Relief Blind Plugs
Nylon - fits PG/NPT/Metric Threads
These non-threaded Plugs are made
of Black Nylon (RAL 9005) and fit PG,
NPT and Metric Strain Relief Fittings.
Part Numbers
-40 °F to 212 °F
(-40 °C to 100 °C)
L
D2
Other Products / Index
Technical Information
O-Rings: Buna-N, FPM, Silicone
Seal Rings: Polyethylene, Fiber-Reinforced Plastic
D1
Inserts into
Dome Nut for
a liquid tight
seal!
30
PL-07-BK
PL-09-BK
PL-11-BK
PL-13-BK
PL-16-BK
PL-21-BK
PL-29-BK
PL-36-BK
PL-42-BK
PL-48-BK
Fits PG
Thread
Fits NPT
Thread
Fits Metric
Thread
See page
49 for thread
specs
See page
49 for thread
specs
See page
49 for thread
specs
PG 7
M12 x 1.5
PG 9
3/8” NPT
M16 x 1.5
PG 11
M16 x 1.5 -E
PG 13 / 13.5
1/2” NPT
M20 x 1.5
PG 16
1/2” NPT -E
M20 x 1.5 -E
PG 21
3/4” NPT
M25 x 1.5
PG 29
1” & 1-1/4” NPT
M32 x 1.5
PG 36
1-1/2” NPT
M40 x 1.5
PG 42
M50 x 1.5
PG 48
M63 x 1.5
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Dimensions in Inches (mm)
D1
D2
L
Diameter (1)
Diameter (2)
Length
.24 (6)
.26 (7.5)
.37 (9.5)
.45 (11.5)
.53 (13.5)
.69 (17.5)
.94 (24)
1.22 (31)
1.46 (37)
1.69 (43)
.18 (4.5)
.22 (5.5)
.26 (6.5)
.33 (8.5)
.45 (11.5)
.61 (15.5)
.75 (19)
.98 (25)
1.18 (30)
1.34 (34)
.59 (15)
.67 (17)
.75 (19)
.75 (19)
.77 (19.5)
.93 (23.5)
1.02 (26)
1.10 (28)
1.10 (28)
1.10 (28)
w w w. s e a l c o nu s a . c o m
Dome Plugs: Nylon
Part Numbers
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
Thread Type
& Size
DP-07-BK
DP-09-BK
DP-11-BK
DP-13-BK
DP-16-BK
DP-21-BK
DP-29-BK
DP-36-BK
DP-42-BK
DP-48-BK
DP-07-GY
DP-09-GY
DP-11-GY
DP-13-GY
DP-16-GY
DP-21-GY
DP-29-GY
DP-36-GY
DP-42-GY
DP-48-GY
DM-12-BK
DM-16-BK
DM-20-BK
DM-25-BK
DM-32-BK
DM-40-BK
DM-50-BK
DM-63-BK
DM-12-GY
DM-16-GY
DM-20-GY
DM-25-GY
DM-32-GY
DM-40-GY
DM-50-GY
DM-63-GY
E
Overall
Height
Dome
Diameter
Thread
Length
PG 7
.31 (8)
PG 9
.35 (9)
PG 11
.35 (9)
PG 13 / 13.5 .37 (9.5)
PG 16
.37 (9.5)
PG 21
.43 (11)
PG 29
.47 (12)
PG 36
.59 (15)
PG 42
.63 (16)
PG 48
.63 (16)
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.39 (10)
.45 (11.5)
.37 (9.5)
.61 (15.5)
.63 (16)
.71 (18)
.73 (18.5)
.75 (19)
Black *
See page
49 for thread
specs
Wrench
Flat
Thread
Length
HP-07-BK
HP-09-BK
HP-11-BK
HP-13-BK
HP-16-BK
HP-21-BK
HP-29-BK
HP-36-BK
HP-42-BK
HP-48-BK
PG 7 / 1/4” NPT
PG 9
PG 11
PG 13 / 13.5
PG 16
PG 21
PG 29
PG 36
PG 42
PG 48
.51 (13)
.51 (13)
.57 (14.5)
.57 (14.5)
.63 (16)
.69 (17.5)
.71 (18)
.79 (20)
.79 (20)
.83 (21)
.59 (15)
.75 (19)
.94 (24)
.94 (24)
1.10 (28)
1.42 (36)
1.81 (46)
2.17 (55)
2.36 (60)
2.76 (70)
.33 (8.5)
.33 (8.5)
.35 (9)
.35 (9)
.41 (10.5)
.45 (11.5)
.45 (11.5)
.53 (13.5)
.53 (13.5)
.57 (14.5)
.59 (15)
.79 (20)
.98 (25)
1.18 (30)
1.50 (38)
1.81 (46)
2.20 (56)
2.72 (69)
.24 (6)
.28 (7)
.24 (6)
.43 (11)
.43 (11)
.51 (13)
.51 (13)
.59 (15)
HM-12-BK
HM-16-BK
HM-20-BK
HM-25-BK
HM-32-BK
HM-40-BK
HM-50-BK
HM-63-BK
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.51 (13)
.51 (13)
.57 (14.5)
.63 (16)
.69 (17.5)
.71 (18)
.79 (20)
.83 (21)
.59 (15)
.75 (19)
.94 (24)
1.10 (28)
1.42 (36)
1.81 (46)
2.17 (55)
2.76 (70)
.33 (8.5)
.33 (8.5)
.35 (9)
.41 (10.5)
.45 (11.5)
.45 (11.5)
.53 (13.5)
.57 (14.5)
Hex Plugs: Polypropylene
Part Numbers
0 °C to 135 °C (32 °F to 275 °F)
Nylon Dome Plug
H
E
Nylon Hex Plug
Thread Type
Thread
Type
& Size
Black
See page
49 for thread
specs
HN-38-BK
HN-12-BK
HN-34-BK
HN-10-BK
3/8” NPT
1/2” NPT
3/4” NPT
1” NPT
X
Also available with the
following approvals:
www.sealconex.com
Overall
Height
Dimensions in Inches (mm)
H
Overall
Height
X
Wrench
Flat
E
Thread
Length
.83 (21)
.81 (20.5)
.87 (22)
.91 (23)
.75 (19)
.94 (24)
1.10 (28)
1.34 (34)
.59 (15)
.55 (14)
.63 (16)
.67 (17)
Adapter,Reducer,Enlarger
Thread Type
E
.24 (6)
.24 (6)
.24 (6)
.24 (6)
.24 (6)
31 (8)
.31 (8)
.39 (10)
.39 (10)
.47 (12)
Note: HP & HM Nylon Plugs
can be tightened with Hex &
Allen wrenches, as well as
regular screwdrivers.
H
X
.59 (15)
.75 (19)
.87 (22)
.98 (25)
1.06 (27)
1.30 (33)
1.73 (44)
2.17 (55)
2.44 (62)
2.72 (69)
D
E
H
Accessories
Gray
D
Dimensions in Inches (mm)
PVDF / Steel
Black
H
Thread Type
& Size
-4 °F to 176 °F
(-20 °C to 80 °C)
Nickel Plated Brass
See page
49 for thread
specs
Hex Plugs: Nylon
Part Numbers
Dimensions in Inches (mm)
Nylon Strain Relief
Accessories - (Dome & Hex) Hole Plugs
Nylon & Polypropylene - PG/NPT/Metric Threads
*
*Note: German Lloyd Approval only applies to Nylon Hex Plugs with PG or Metric Threads.
Dome Plugs: Nickel Plated Brass
Part Numbers
-40 °F to 176 °F
(-40°C to 80°C)
See page
49 for
with O-Ring thread
specs
Dome Plugs: Nickel Plated Brass
Dimensions in Inches (mm)
H
D
E
Part Numbers
-40 °F to 176 °F
(-40 °C to 80 °C)
E
Overall Dome Thread Thread
Height Diameter Length Length
w/ O-Ring
O-Ring needed for Nema 4x.
See page
with O-Ring 49 for thread
specs
without ORing
Dimensions in Inches (mm)
H
D
E
H
Overall Dome Thread
Height Diameter Length
D
E
Overall
Height
Dome Thread
Diameter Length
w/ O-Ring
w/ O-Ring w/ O-Ring
DM-12-BR DM-12-BR-BM12 x 1.5 .30 (7.5) .55 (14) .20 (5) .37 (9.5) .55 (14) .26 (6.5)
DM-16-BR DM-16-BR-BM16 x 1.5 .35 (9) .71 (18) .20 (5) .35 (9) .79 (20) .24 (6)
DM-20-BR DM-20-BR-BM20 x 1.5 .37 (9.5) .87 (22) .26 (6.5) .37 (9.5) .94 (24) .26 (6.5)
DM-25-BR DM-25-BR-BM25 x 1.5 .43 (11) 1.10 (28) .28 (7) .43 (11) 1.10 (28) .28 (7)
DM-32-BR DM-32-BR-BM32 x 1.5 .47 (12) 1.38 (35) .31 (8) .49 (12.5)1.38 (35) .31 (8)
DM-40-BR DM-40-BR-BM40 x 1.5 .51 (13) 1.73 (44) .33 (8.5) .47 (12) 1.77 (45) .31 (8)
DM-50-BR DM-50-BR-BM50 x 1.5 .59 (15) 2.13 (54) .35 (9) .59 (15) 2.17 (55) .35 (9)
DM-63-BR DM-63-BR-BM63 x 1.5 .63 (16) 2.64 (67) .39 (10) .63 (16) 2.68 (68) .39 (10)
D
H
E
Thread Type
To order hole plug with a FPM
O-Ring instead of Buna-N,
replace “-V” (FPM) to part
number (e.g. DP-11-BR-V)
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
31
Other Products / Index
DP-07-BR DP-07-BR-B PG 7 .31 (8) .55 (14) .20 (5) .19 (4.8)
DP-09-BR DP-09-BR-B PG 9 .35 (9) .67 (17) .24 (6) .22 (5.5)
DP-11-BR DP-11-BR-B PG 11 .35 (9) .79 (20) .24 (6) .22 (5.5)
13 /
DP-13-BR DP-13-BR-B PG
13.5 .37 (9.5) .87 (22) .26 (6.5) .24 (6)
DP-16-BR DP-16-BR-B PG 16 .37 (9.5) .94 (24) .26 (6.5) .24 (6)
DP-21-BR DP-21-BR-B PG 21 .43 (11) 1.18 (30) .28 (7) .26 (6.5)
DP-29-BR DP-29-BR-B PG 29 .47 (12) 1.54 (39) .31 (8) .30 (7.5)
DP-36-BR DP-36-BR-B PG 36 .59 (15) 1.97 (50) .35 (9) .35 (9)
DP-42-BR DP-42-BR-B PG 42 .63 (16) 2.24 (57) .39 (10) .39 (10)
DP-48-BR DP-48-BR-B PG 48 .63 (16) 2.52 (64) .39 (10) .39 (10)
Thread
Type
& Size
Technical Information
without
O-Ring
Thread
Type
& Size
Conduit System
Accessories - (Dome) Hole Plugs
Nickel Plated Brass - PG/Metric Threads
Nylon Strain Relief
w w w. s e a l c o nu s a . c o m
Hex Plugs: Nickel Plated Brass
Part Numbers
PVDF / Steel
Nickel Plated Brass
-4 ºF to 203 ºF
(-20 ºC to 95 ºC)
Thread Type
& Size
-4 ºF to 356 ºF
(-20 ºC to 180 ºC)
Dimensions in Inches (mm)
H
X
E
Overall
Height
Wrench
Flat
Thread
Length
w/o O-Ring
w/ Buna-N O-Ring
w/ FPM O-Ring
See page
49 for thread
specs
HP-07-BR
HP-09-BR
HP-11-BR
HP-13-BR
HP-16-BR
HP-21-BR
HP-29-BR
HP-36-BR
HP-42-BR
HP-48-BR
HP-07-BR-B
HP-09-BR-B
HP-11-BR-B
HP-13-BR-B
HP-16-BR-B
HP-21-BR-B
HP-29-BR-B
HP-36-BR-B
HP-42-BR-B
HP-48-BR-B
HP-07-BR-V
HP-09-BR-V
HP-11-BR-V
HP-13-BR-V
HP-16-BR-V
HP-21-BR-V
HP-29-BR-V
HP-36-BR-V
HP-42-BR-V
HP-48-BR-V
PG 7 / 1/4”NPT
PG 9
PG 11
PG 13 / 13.5
PG 16
PG 21
PG 29
PG 36
PG 42
PG 48
.31 (8)
.35 (9)
.37 (9.5)
.39 (10)
.39 (10)
.41 (10.5)
.49 (12.5)
.51 (13)
.59 (15)
.65 (16.5)
.55 (14)
.67 (17)
.79 (20)
.87 (22)
.94 (24)
1.18 (30)
1.61 (41)
1.97 (50)
2.28 (58)
2.56 (65)
.20 (5)
.24 (6)
.24 (6)
.26 (6.5)
.26 (6.5)
.28 (7)
.31 (8)
.31 (8)
.35 (9)
.39 (10)
HM-12-BR
HM-16-BR
HM-20-BR
HM-25-BR
HM-32-BR
HM-40-BR
HM-50-BR
HM-63-BR
HM-12-BR-B
HM-16-BR-B
HM-20-BR-B
HM-25-BR-B
HM-32-BR-B
HM-40-BR-B
HM-50-BR-B
HM-63-BR-B
HM-12-BR-V
HM-16-BR-V
HM-20-BR-V
HM-25-BR-V
HM-32-BR-V
HM-40-BR-V
HM-50-BR-V
HM-63-BR-V
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
.37 (9.5)
.35 (9)
.37 (9.5)
.41 (10.5)
.49 (12.5)
.51 (13)
.59 (15)
.65 (16.5)
.55 (14)
.75 (19)
.87 (22)
1.18 (30)
1.61 (41)
1.81 (46)
2.17 (55)
2.76 (70)
.26 (6.5)
.24 (6)
.24 (6)
.28 (7)
.31 (8)
.31 (8)
.35 (9)
.39 (10)
Nickel Plated Brass
Hex Plug
O-Ring needed for NEMA 4x & 6 Rating.
X
H
E
Thread Type
Dome Fittings also available
with the following approvals:
www.sealconex.com
Also all Nickel Plated Brass &
Stainless Steel HM (Hex) Hole
Plugs are available with Ex-d
approved
*Note: PCT Approval only applies to Hex Plugs without O-Ring.
Accessories - (Hex) Hole Plugs
(303) Stainless Steel - PG/Metric Threads
Adapter,Reducer,Enlarger
Accessories
Accessories - (Hex) Hole Plugs
Nickel Plated Brass - PG/Metric Threads
*
X
These Plugs are designed to fit and seal European PG threads per
DIN 46320-FS/PA and Metric threads per DIN 46320/Ms.
H
E
Thread Type
They are made of Stainless Steel and are available with Buna-N, FPM
or Silicone O-Ring.
Also available in Nylon, Nickel Plated Brass, or 316L Stainless Steel. (see Page 31)
Dome Fittings also available
with the following approvals:
www.sealconex.com
Optional O-Rings & Other Accessories starting on Page 28 - 39.
Conduit System
Hex Plugs: (303) Stainless Steel
Part Numbers
-76 °F to 356 °F
(-60 °C to 180 °C)
Thread
Type
& Size
See page
49 for thread
specs
Dimensions in Inches (mm)
H
X
E
Overall
Height
Wrench
Flat
Thread
Length
w/ Buna-N O-Ring
w/ FPM O-Ring
w/ Silicone O-Ring
Technical Information
-4 °F to 356 °F
(-20 °C to 180 °C)
HP-07-SS-B
HP-09-SS-B
HP-11-SS-B
HP-13-SS-B
HP-16-SS-B
HP-21-SS-B
HP-29-SS-B
HP-36-SS-B
HP-07-SS-V
HP-09-SS-V
HP-11-SS-V
HP-13-SS-V
HP-16-SS-V
HP-21-SS-V
HP-29-SS-V
HP-36-SS-V
HP-07-SS-S
HP-09-SS-S
HP-11-SS-S
HP-13-SS-S
HP-16-SS-S
HP-21-SS-S
HP-29-SS-S
HP-36-SS-S
PG 7 / 1/4”NPT
PG 9
PG 11
PG 13 / 13.5
PG 16
PG 21
PG 29
PG 36
.31 (8)
.35 (9)
.37 (9.5)
.39 (10)
.39 (10)
.41 (10.5)
.49 (12.5)
.51 (13)
.55 (14)
.67 (17)
.79 (20)
.87 (22)
.94 (24)
1.18 (30)
1.61 (41)
1.97 (50)
.20 (5)
.24 (6)
.24 (6)
.26 (6.5)
.26 (6.5)
.28 (7)
.31 (8)
.31 (8)
Other Products / Index
-4 °F to 203 °F
(-20 °C to 95 °C)
HM-12-SS-B
HM-16-SS-B
HM-20-SS-B
HM-25-SS-B
HM-32-SS-B
HM-40-SS-B
HM-12-SS-V
HM-16-SS-V
HM-20-SS-V
HM-25-SS-V
HM-32-SS-V
HM-40-SS-V
HM-12-SS-S
HM-16-SS-S
HM-20-SS-S
HM-25-SS-S
HM-32-SS-S
HM-40-SS-S
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
.37 (9.5)
.35 (9)
.37 (9.5)
.41 (10.5)
.49 (12.5)
.51 (13)
.55 (14)
.75 (19)
.87 (22)
1.18 (30)
1.61 (41)
1.81 (46)
.26 (6.5)
.24 (6)
.24 (6)
.28 (7)
.31 (8)
.31 (8)
32
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
Part Numbers
Cable
Range
Thread
Type
& Size
Nickel Plated Brass
KL12MA-BR
KL16MA-BR
KL20MA-BR
KL25MA-BR
KL32MA-BR
KL40MA-BR
KL50MA-BR
.20 - .30 (5-7.5)
.28 - .39 (7-10)
.39 - .55 (10-14)
.47 - .85 (12-21.5)
.63 - 1.06 (16-27)
.87 - 1.30 (22-33)
.98 - 1.52 (25-38.5)
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
A
H
T
F
Hole
O.D.
Body
Length
Thread
Length
Wrench
Flat
.47 (12)
.63 (16)
.79 (20)
.98 (25)
1.26 (32)
1.57 (40)
1.97 (50)
.59 (15)
.63 (16)
.71 (18)
.83 (21)
.87 (22)
1.00 (25.5)
1.00 (25.5)
.22 (5.5)
.24 (6)
.26 (6.5)
.31 (8)
.31 (8)
.37 (9.5)
.37 (9.5)
.63 (16)
.75 (19)
.94 (24)
1.34 (34)
1.65 (42)
2.05 (52)
2.05 (52)
H
T
Thread Type
This clamp offers Extra Pull-out
Resistance. Made of durable
Nickel Plated Brass, it offers
an excellent solution for your
specific application needs. Not
a liquid tight solution.
Also available in PG Threads!
Part Numbers
Used with Sizes
Nylon
Dome Nut
PG7, M12
PG7, M12
PG 9, 3/8” NPT, M16
PG 11, 3/8” NPT, M16-E
PG 13 / 13.5, 1/2” NPT, M20
PG 16, 1/2” NPT-E, M20-E
PG 9, 3/8” NPT, M16
3/8” NPT, M16
PG 11, M16-E
PG 13 / 13.5, 1/2” NPT, M20
PG 16, 1/2” NPT-E, M20-E
PG 21, 3/4” NPT, M25
PG 21, 3/4” NPT, M25
PG 21
PG 29, 1” NPT, M32
PG 29
PG 29, 1”, 1-1/4” NPT, M32
1-1/4” NPT
M 50
PG 42, M50
PG 42, M50
PG 48, M63
M63
Handle
D
Outer
Diameter
.55 (14)
.59 (15)
.67 (17)
.75 (19)
.79 (20)
.87 (22)
.94 (24)
1.06 (27)
1.18 (30)
1.30 (33)
1.42 (36)
1.57 (40)
1.61 (41)
1.65 (42)
1.81 (46)
1.97 (50)
2.09 (53)
2.17 (55)
2.24 (57)
2.36 (60)
2.52 (64)
2.56 (65)
2.68 (68)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
2.36 (60)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
3.94 (100)
.35 (9)
.37 (9.5)
.39 (10)
.43 (11)
.47 (12)
.51 (13)
.59 (15)
.67 (17)
.71 (18)
.79 (20)
.87 (22)
.98 (25)
1.06 (27)
1.06 (27)
1.22 (31)
1.26 (32)
1.26 (32)
1.26 (32)
1.42 (36)
1.50 (38)
1.57 (40)
1.65 (42)
1.65 (42)
.75 (19)
.79 (20)
.93 (23.5)
1.02 (26)
1.06 (27)
1.16 (29.5)
1.28 (32.5)
1.40 (35.5)
1.59 (40.5)
1.71 (43.5)
1.87 (47.5)
2.07 (52.5)
2.11 (53.5)
2.15 (54.5)
2.36 (60)
2.58 (65.5)
2.82 (71.5)
2.83 (72)
2.97 (75.5)
3.09 (78.5)
3.31 (84)
3.35 (85)
3.43 (87)
The handy, light weight Deep Socket Wrench is manufactured
from alloy steel. It is slit open along the full length to accommodate
the installed cable during tightening of the dome nut. The wrench
encloses the dome nut on five sides, giving the nut additional
rigidity during tightening. This is especially important if a stiff cable
is used. Does not work with all Flex Fittings.
Other Products / Index
Slit is open the full
length to accomodate
the installed cable.
F
C D
The wrench
encloses the dome
nut on five sides.
L
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Technical Information
PG 48, M63
M63
C
Inner
Diameter
Conduit System
PG 36, M40
PG 36, 1-1/2” NPT, M40
M 50
L
Length
Adapter,Reducer,Enlarger
S-1400-WR
S-1500-WR
S-1700-WR
S-1900-WR
S-2000-WR
S-2200-WR
S-2400-WR
S-2700-WR
S-3000-WR
S-3300-WR
S-3600-WR
S-4000-WR
S-4100-WR
S-4200-WR
S-4600-WR
S-5000-WR
S-5300-WR
S-5500-WR
S-5700-WR
S-6000-WR
S-6400-WR
S-6500-WR
S-6800-WR
See page 49
for thread
specs
F
Wrench
Flat
Accessories
Socket Wrench
Dimensions in Inches (mm)
Brass
Dome Nut
See page 49
for thread
specs
PVDF / Steel
Accessories - Deep Socket Wrenches for
Strain Relief Fittings - Nickel Plated Brass
Nickel Plated Brass
See page
49 for thread
specs
F
Dimensions in Inches (mm)
Nylon Strain Relief
Accessories - Cable Clamp Fitting (Low Profile)
Fits Metric & PG Threads
33
Nylon Strain Relief
Accessories - Thread Adapters - Nickel Plated Brass
(Hex & Round) - PG/NPT/Metric Threads
w w w. s e a l c o nu s a . c o m
Thread Adapters: PG to NPT Threads
Dealing with foreign products?
Is connecting a challenge?
Well, look no further!
B
Part Numbers
Threads
Nickel Plated Brass
W
W
T
H
Wrench
Flat
Thread
Length
Height
1/2” NPT
1/2” NPT
.94 (24)
.94 (24)
.24 (6) .94 (24)
.24 (6) .89 (22.7)
1/2” NPT
.94 (24)
.26 (6.5) .93 (23.5)
Male
Thread
A
Female
Thread
B
PG 9
PG 11
PG 13 /
13.5
PG 16
PG 21
PG 21
PG 29
H
T
A
(AG-xxxx-BR & AM-xxxx-BR)
X
B
Nickel Plated Brass
w/ Buna-N O-Ring
AG-0912-BR*
AG-1112-BR
Aluminum
AG-0912-AL*
-
AG-1312-BR
-
AG-1612-BR
AG-2112-BR
AG-2134-BR
AG-2910-BR
-
PVDF / Steel
H
T
More custom parts available
online at www.sealconusa.com
or upon request!
A
(AF-xxxx-BR, AP-xxxx-BR & AG-xxxx-AL)
Accessories
Adapter,Reducer,Enlarger
Threads
Male
Thread
A
Female
Thread
B
AN-1407-BR
AN-1209-BR
AN-1211-BR
1/4” NPT
1/2” NPT
1/2” NPT
AN-1213-BR
1/2” NPT
AN-1221-BR
AN-3421-BR
AN-1029-BR
1/2” NPT
3/4” NPT
1” NPT
1-1/4”
NPT
PG 7
PG 9
PG 11
PG 13 /
13.5
PG 21
PG 21
PG 29
PG 29
AN-5429-BR
Dimensions in Inches (mm)
Part Numbers
W
T
H
AP-0916-BR
AP-1120-BR
Wrench
Flat
Thread
Length
Height
AP-1320-BR
.75 (19)
.98 (25)
.98 (25)
.59 (15) .98 (25)
.79 (20) 1.18 (30)
.79 (20) 1.18 (30)
.98 (25)
.79 (20) 1.18 (30)
1.30 (33)
1.30 (33)
1.61 (41)
.79 (20) 1.26 (32)
.67 (17) 1.22 (31)
.98 (25) 1.57 (40)
1.69 (43)
.94 (24) 1.34 (34)
AP-1625-BR
Conduit System
*Note: O-Ring not Included
W
H
W
H
T
.91 (23)
.59 (15)
.94 (24)
.79 (20)
*Note: O-Ring not Included
Thread Adapters: NPT to PG Threads*
Part Numbers
1/2” NPT .94 (24) .26 (6.5)
1/2” NPT 1.18 (30) .28 (7)
3/4” NPT 1.18 (30) .28 (7)
1” NPT 1.57 (40) .31 (8)
Thread Adapters: PG to Metric Threads*
Operating Temperature (Nickel Plated Brass Adapters with O-Ring):
-40 °C to 100 °C (-40 °F to 212 °F)
Threads
Dimensions in Inches (mm)
Male
Thread
A
Female
Thread
B
X
T
H
Outer
Diameter
Thread
Length
Height
PG 9
PG 11
PG
13/13.5
PG 16
M16 x 1.5
M20 x 1.5
.79 (20)
.87 (22)
.24 (6) .65 (16.5)
.26 (6.5) .75 (19)
M20 x 1.5
.87 (22)
.26 (6.5) .75 (19)
M25 x 1.5 1.06 (27) .26 (6.5) .83 (21)
*Note: O-Ring not Included
Thread Adapters: Metric to PG Threads*
Part Numbers
Threads
Dimensions in Inches (mm)
Male
Thread
A
Female
Thread
B
AF-1609-BR
AF-2011-BR
M16 x 1.5
M20 x 1.5
AF-2013-BR
M20 x 1.5
AF-2016-BR
AF-2516-BR
AF-2521-BR
AF-3229-BR
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
PG 9
PG 11
PG 13 /
13.5
PG 16
PG 16
PG 21
PG 29
X
T
H
Outer
Diameter
Thread
Length
Height
.79 (20)
.87 (22)
.24 (6) .65 (16.5)
.26 (6.5) .75 (19)
.87 (22)
.26 (6.5) .75 (19)
.94 (24) .26 (6.5) .75 (19)
1.10 (28) .26 (6.5) .75 (19)
1.18 (30) .26 (6.5) .83 (21)
1.54 (39) .28 (7) .91 (23)
*Note: O-Ring not Included
T
Thread Adapters: Metric to NPT Threads
Technical Information
Other Products / Index
Dimensions in Inches (mm)
(AT-xxxx-BR)
(AN-xxxx-BR)
Part Numbers
Male
Thread
A
Thread Adapters: NPT to Metric Threads*
Part Numbers
Threads
Male
Thread
A
AT-1216-BR
AT-1220-BR
AT-1225-BR
AT-3425-BR
AT-1032-BR
AT-5432-BR
1/2” NPT
1/2” NPT
1/2” NPT
3/4” NPT
1” NPT
Female
Thread
B
M16 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
1-1/4” NPT M32 x 1.5
Dimensions in Inches (mm)
W
T
H
Wrench
Flat
.98 (25)
.98 (25)
1.26 (32)
1.24 (31.6)
1.50 (38)
1.67 (42.5)
Thread
Length
.79 (20)
.79 (20)
.79 (20)
.75 (19)
.98 (25)
.59 (15)
Height
1.18 (30)
1.18 (30)
1.18 (30)
1.18 (30)
1.61 (41)
1.30 (33)
Threads
Nickel Plated Brass
w/ Buna-N O-Ring
AM-1612-BR
AM-2012-BR
AM-2512-BR
AM-2534-BR
AM-3210-BR
AM-3254-BR
*Note: O-Ring not Included
Dimensions in Inches (mm)
Female
Thread
B
M16 x 1.5 1/2” NPT
M20 x 1.5 1/2” NPT
M25 x 1.5 1/2” NPT
M25 x 1.5 3/4” NPT
M32 x 1.5 1” NPT
M32 x 1.5 1-1/4” NPT
W
T
H
Wrench
Flat
Thread
Length
Height
.94 (24)
.94 (24)
1.18 (30)
1.18 (30)
1.57 (40)
1.81 (46)
.24 (6)
.24 (6)
.28 (7)
.28 (7)
.31 (8)
.31 (8)
.91 (23)
.91 (23)
.59 (15)
1.07 (26)
1.30 (33)
1.30 (33)
See page 49 for thread specifications.
34
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
Operating Temperature (Metric to PG & PG to Metric Nylon Adapters): -4°F to 176 °F (-20°C to 80 °C)
Black Nylon/Polypropylene* - Thread Adapters: Metric to PG Threads
Type A
Part Numbers
B
W
T
D
A
B
Female
Thread
B
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
PG 7
PG 9
PG 13
PG 13 / 13.5
PG 16
PG 21
PG 29
PG 36
PG 42
PG 48
See page 49
for thread
specs
A
C*
A
B
A
A
A
A
C
C*
Dimensions in Inches (mm)
T
H
D
W
Thread
Length
.31 (8)
.59 (15)
.31 (8)
.31 (8)
.31 (8)
.39 (10)
.39 (10)
.47 (12)
.59 (15)
.59 (15)
Height
Inner
Diameter
.26 (6.5)
.33 (8.5)
.55 (14)
.71 (18)
.71 (18)
.98 (25)
1.30 (33)
1.69 (43)
2.05 (52)
2.01 (51)
Wrench
Flat
.67 (17)
N/A
.98 (25)
1.14 (29)
1.14 (29)
1.43 (36)
1.77 (45)
2.17 (55)
N/A
N/A
.79 (20)
1.34 (34)
.83 (21)
.55 (14)
.87 (22)
.98 (25)
.98 (25)
1.14 (29)
.79 (20)
1.38 (35)
PVDF / Steel
Type B
AF-1207-BK
AF-1609-BK
AF-2013-BK
AF-2513-BK
AF-2516-BK
AF-3221-BK
AF-4029-BK
AF-5036-BK
AF-6342-BK
AF-6348-BK
Male
Thread
A
Adapter
Type
Nickel Plated Brass
H
Threads
*Note: Parts are made of Polypropylene.
W
Black Nylon/Polypropylene* - Thread Adapters: PG to Metric Threads
H
Part Numbers
T
Type C
B
T
D
A
PG 7
PG 9
PG 9
PG 11
PG 11
PG 13 / 13.5
PG 13
PG 16
PG 16
PG 21
PG 21
PG 29
PG 29
PG 36
PG 36
PG 42
PG 42
PG 48
PG 48
M12 x 1.5
M12 x 1.5
M16 x 1.5
M16 x 1.5
M20 x 1.5
M16 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M32 x 1.5
M40 x 1.5
M40 x 1.5
M50 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
See page 49
for thread
specs
C*
C
A
C
C*
B
A
A
A
C
A
C
A
C
C*
C
C*
C
C*
T
H
D
W
Thread
Length
.59 (15)
.59 (15)
.31 (8)
.59 (15)
.59 (15)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.59 (15)
.31 (8)
.59 (15)
.39 (10)
.59 (15)
.59 (15)
.59 (15)
.59 (15)
.59 (15)
.59 (15)
Height
Inner
Diameter
.24 (6)
.33 (8.5)
.35 (9)
.45 (11.5)
.45 (11.5)
.55 (14)
.55 (14)
.63 (16)
.63 (16)
.81 (20.5)
.83 (21)
1.10 (28)
1.18 (30)
1.50 (38)
1.46 (37)
1.50 (38)
1.69 (43)
1.50 (38)
1.89 (48)
Wrench
Flat
N/A
N/A
.83 (21)
N/A
N/A
.98 (25)
.98 (25)
1.06 (27)
1.18 (30)
N/A
1.46 (37)
N/A
1.77 (45)
N/A
N/A
N/A
N/A
N/A
N/A
1.34 (34)
1.34 (34)
.79 (20)
1.34 (34)
1.34 (34)
.55 (14)
.83 (21)
.83 (21)
.91 (23)
1.34 (34)
.91 (23)
1.34 (34)
1.06 (27)
.79 (20)
1.36 (34.5)
.79 (20)
1.36 (34.5)
.79 (20)
1.38 (35)
Conduit System
Type D
Female
Thread
B
Dimensions in Inches (mm)
Adapter,Reducer,Enlarger
H
AP-0712-BK
AP-0912-BK
AP-0916-BK
AP-1116-BK
AP-1120-BK
AP-1316-BK
AP-1320-BK
AP-1620-BK
AP-1625-BK
AP-2125-BK
AP-2132-BK
AP-2932-BK
AP-2940-BK
AP-3640-BK
AP-3650-BK
AP-4240-BK
AP-4250-BK
AP-4850-BK
AP-4863-BK
Male
Thread
A
Adapter
Type
Accessories
D
A
Threads
*Note: Parts are made of Polypropylene.
B
Nylon Strain Relief
Accessories - Thread Adapters - Nylon/Polypropylene
Nylon Polypropylene
(Hex & Round) - PG/NPT/Metric Threads
Black Nylon - Thread Adapters: PG to NPT Threads
Part Numbers
H
T
D
A
AG-1112-BK
AG-1312-BK
Threads
Male
Thread
A
Female
Thread
B
PG 11
PG 13 / 13.5
1/2” NPT
1/2” NPT
Adapter
Type
See page 49
for thread
specs
D
D
Dimensions in Inches (mm)
T
H
D
W
Thread
Length
.28 (7)
.35 (9)
Height
Inner
Diameter
N/A
N/A
Wrench
Flat
.94 (24)
.94 (24)
.83 (21)
.91 (23)
Technical Information
W
Black Nylon - Thread Adapters: Metric to NPT Threads
Type E
W
H
AM-1612-BK
AM-2012-BK
T
Threads
Male
Thread
A
Female
Thread
B
M16 x 1.5
M20 x 1.5
1/2” NPT
1/2” NPT
Adapter
Type
See page 49
for thread
specs
E
E
D
A
Dimensions in Inches (mm)
T
H
D
W
Thread
Length
.28 (7)
.28 (7)
Height
Inner
Diameter
N/A
N/A
Wrench
Flat
1.02 (26)
1.02 (26)
1.10 (28)
1.06 (27)
Other Products / Index
Part Numbers
B
35
Dimensions and specifications may be changed without prior notice.
Nylon Strain Relief
Nickel Plated Brass
PVDF / Steel
Accessories
*
Accessories - Thread Reducers - Nickel Plated Brass
(Hex & Round) - PG/NPT/Metric Threads
*
w w w. s e a l c o nu s a . c o m
Is your thread size off by one size?
These Reducers will solve that threading
problem. They convert holes which fit PG, NPT
or Metric threads to a smaller female thread of
the same thread type.
Thread Reducers: Metric to Metric Threads*
Part Numbers
Threads
Female
Thread
B
M16 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M32 x 1.5
M40 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M12 x 1.5
M12 x 1.5
M16 x 1.5
M16 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M32 x 1.5
M40 x 1.5
M40 x 1.5
M50 x 1.5
without O-Ring
RR-1612-BR
RR-2012-BR
RR-2016-BR
RR-2516-BR
RR-2520-BR
RR-3220-BR
RR-3225-BR
RR-4025-BR
RR-4032-BR
RR-5032-BR
RR-5040-BR
RR-6340-BR
RR-6350-BR
Adapter,Reducer,Enlarger
Conduit System
Technical Information
H
Outer
Diameter
Thread
Length
Height
RQ-1309-BR
RP-1309-BR
.71 (18)
.94 (24)
.94 (24)
1.18 (30)
1.18 (30)
1.54 (39)
1.54 (39)
1.69 (43)
1.69 (43)
2.24 (57)
2.24 (57)
2.52 (64)
2.52 (64)
.24 (6)
.26 (6.5)
.26 (6.5)
.28 (7)
.28 (7)
.31 (8)
.31 (8)
.31 (8)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.33 (8.5)
.35 (9)
.35 (9)
.39 (10)
.39 (10)
.45 (11.5)
.45 (11.5)
.45 (11.5)
.49 (12.5)
.55 (14)
.55 (14)
.55 (14)
.55 (14)
RQ-1311-BR
RP-1311-BR
RQ-1609-BR
RQ-1611-BR
RP-1609-BR
RP-1611-BR
RQ-1613-BR
RP-1613-BR
PG 16
RQ-2111-BR
RP-2111-BR
PG 21
RQ-2113-BR
RP-2113-BR
PG 21
RQ-2116-BR
RQ-2916-BR
RQ-2921-BR
RQ-3621-BR
RQ-3629-BR
RQ-4229-BR
RQ-4236-BR
RQ-4836-BR
RQ-4842-BR
RP-2116-BR
RP-2916-BR
RP-2921-BR
RP-3621-BR
RP-3629-BR
RP-4229-BR
RP-4236-BR
RP-4836-BR
RP-4842-BR
PG 21
PG 29
PG 29
PG 36
PG 36
PG 42
PG 42
PG 48
PG 48
Dimensions in Inches (mm)
D
T
PG 7
PG 7
PG 9
PG 9
.87 (22)
PG 11
.87 (22)
RR-1609-BR
RR-1611-BR
PG 9
PG 11
PG 11
PG 13 /
13.5
PG 13 /
13.5
PG 16
PG 16
Outer
Diameter
.67 (17)
.79 (20)
.79 (20)
.94 (24)
.94 (24)
RR-1613-BR
PG 16
RR-2111-BR
PG 21
RR-2113-BR
PG 21
RR-2116-BR
RR-2916-BR
RR-2921-BR
RR-3621-BR
RR-3629-BR
RR-4229-BR
RR-4236-BR
RR-4836-BR
RR-4842-BR
PG 21
PG 29
PG 29
PG 36
PG 36
PG 42
PG 42
PG 48
PG 48
PG 9
PG 11
PG 13 /
13.5
PG 11
PG 13 /
13.5
PG 16
PG 16
PG 21
PG 21
PG 29
PG 29
PG 36
PG 36
PG 42
RR-1309-BR
RR-1311-BR
RP-0907-BR
RP-1107-BR
RP-1109-BR
T
Female
Thread
B
RR-0907-BR
RR-1107-BR
RR-1109-BR
*
without O-Ring
.94 (24)
Thread Height
Length
.24 (6) .33 (8.5)
.24 (6) .33 (8.5)
.24 (6) .33 (8.5)
Part Numbers
Operating
Temperature
(Hex Nickel
Plated Brass
.26 (6.5) .35 (9)
Reducers with
.26 (6.5) .35 (9) Buna-N O-Ring):
-40 °C to 100 °C
.26 (6.5) .37 (9.5) (-40 °F to 212 °F)
.26 (6.5) .37 (9.5)
.26 (6.5) .37 (9.5)
1.18 (30)
.28 (7)
.39 (10)
1.18 (30)
.28 (7)
.39 (10)
1.18 (30)
1.54 (39)
1.54 (39)
1.97 (50)
1.97 (50)
2.24 (57)
2.24 (57)
2.52 (64)
2.52 (64)
.28 (7)
.31 (8)
.31 (8)
.35 (9)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
*
w/ Buna-N O-Ring
RM-1612-BR
RM-2012-BR
RM-2016-BR
RM-2516-BR
RM-2520-BR
RM-3216-BR
RM-3220-BR
RM-3225-BR
RM-4020-BR
RM-4025-BR
RM-4032-BR
RM-5025-BR
RM-5032-BR
RM-5040-BR
RM-6332-BR
RM-6340-BR
RM-6350-BR
Part Numbers
(RR-xxxx-BR)
T
36
H
(RQ-xxxx-BR, RP-xxxx-BR &
RM-xxxx-BR)
*Note: PCT Approval only applies to Hex Plugs with an O-Ring.
See page 49 for thread specifications.
T
H
Thread
Length
Height
.24 (6)
.24 (6)
.24 (6)
.34 (8.8)
.35 (9)
.35 (9)
PG 7
PG 7
PG 9
.67 (17)
.79 (20)
.79 (20)
PG 9
.87 (22) .26 (6.5) .37 (9.5)
PG 11
.87 (22) .26 (6.5) .37 (9.5)
PG 9
PG 11
PG 13 /
13.5
PG 11
PG 13 /
13.5
PG 16
PG 16
PG 21
PG 21
PG 29
PG 29
PG 36
PG 36
PG 42
.94 (24) .26 (6.5) .37 (9.5)
.94 (24) .26 (6.5) .37 (9.5)
.94 (24) .26 (6.5) .37 (9.5)
1.18 (30) .28 (7) .41 (10.3)
1.18 (30) .28 (7) .41 (10.3)
1.18 (30)
1.57 (40)
1.57 (40)
1.97 (50)
1.97 (50)
2.24 (57)
2.24 (57)
2.52 (64)
2.52 (64)
Threads
.28 (7)
.31 (8)
.31 (8)
.35 (9)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.41 (10.3)
.45 (11.5)
.45 (11.5)
.49 (12.5)
.49 (12.5)
.53 (13.5)
.53 (13.5)
.53 (13.5)
.53 (13.5)
Dimensions in Inches (mm)
Male
Thread
A
Female
Thread
B
W
T
H
Wrench
Flat
Thread
Length
Height
M16 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M32 x 1.5
M32 x 1.5
M40 x 1.5
M40 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M63 x 1.5
M12 x 1.5
M12 x 1.5
M16 x 1.5
M16 x 1.5
M20 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
.67 (17)
.87 (22)
.87 (22)
1.06 (27)
1.06 (27)
1.34 (34)
1.34 (34)
1.34 (34)
1.46 (43)
1.46 (43)
1.46 (43)
2.17 (55)
2.17 (55)
2.17 (55)
2.56 (65)
2.56 (65)
2.56 (65)
.20 (5)
.24 (6)
.24 (6)
.28 (7)
.28 (7)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.35 (9)
.35 (9)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.31 (8)
.35 (9)
.35 (9)
.39 (10)
.39 (10)
.43 (11)
.43 (11)
.43 (11)
.47 (12)
.47 (12)
.47 (12)
.51 (13)
.51 (13)
.51 (13)
.55 (14)
.55 (14)
.55 (14)
T
(RN-xxxx-BR)
Threads
Male
Thread
A
H
T
Female
W
Thread Wrench
B
Flat
.39 (10)
.45 (11.5)
.45 (11.5) Reducers
are also
.49 (12.5)
available with
.49 (12.5) the following
.55 (14)
approvals:
.55 (14)
.55 (14)
*Note: German Lloyd Approval applies to Hex Reducers.
.55 (14)
Thread Reducers: NPT to NPT Threads
www.sealconex.com
W
H
Dimensions in Inches (mm)
Thread Reducers: Metric to Metric Threads
H
W
D
Male
Thread
A
D
Male
Thread
A
without O-Ring
*
w/ Buna-N O-Ring
Threads
PG 9
PG 11
PG 11
PG 13 /
13.5
PG 13 /
13.5
PG 16
PG 16
Thread Reducers: PG to PG Threads*
Threads
Part Numbers
RQ-0907-BR
RQ-1107-BR
RQ-1109-BR
Dimensions in Inches (mm)
Male
Thread
A
Part Numbers
Other Products / Index
Thread Reducers: PG to PG Threads
Female
Thread
B
Dimensions in Inches (mm)
W
T
H
Wrench Thread Height
Flat
Length
RN-3412-BR* 3/4” NPT 1/2” NPT 1.18 (30) .71 (18) .87 (22)
RN-1034-BR* 1” NPT 3/4” NPT 1.30 (33) .98 (25) 1.14 (29)
RN-5410-BR* 1-1/4” NPT 1” NPT 1.69 (43) .98 (25) 1.14 (29)
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
Gray Nylon - Thread Reducers: PG to PG Threads*
Part Numbers
Threads
Female
Thread
B
T
Dimensions in Inches (mm)
H
D
W
Height
B
B
A
B
A
A
B
A
A
A
A
Thread
Length
.31 (8)
.31 (8)
.31 (8)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.43 (11)
.43 (11)
.43 (11)
.43 (11)
Outer
Diameter
.75 (19)
.89 (22.5)
1.06 (27)
1.0 (25.5)
1.14 (29)
1.14 (29)
1.13 (28.5)
1.42 (36)
1.42 (36)
1.81 (46)
2.28 (58)
Wrench
Flat
.59 (15)
.75 (19)
N/A
.87 (22)
N/A
N/A
.94 (24)
N/A
N/A
N/A
N/A
.55 (14)
.71 (18)
.47 (12)
.83 (21)
.51 (13)
.51 (13)
.98 (25)
.53 (13.5)
.53 (13.5)
.53 (13.5)
.59 (15)
Type A
D
H
T
B
A
PVDF / Steel
PG 9
PG 7
PG 11
PG 9
PG 13 / 13.5
PG 9
PG 13 / 13.5
PG 11
PG 16
PG 9
PG 16
PG 11
PG 16
PG 13 / 13.5
PG 21
PG 13 / 13.5
PG 21
PG 16
PG 29
PG 21
PG 36
PG 29
RR-0907-GY
RR-1109-GY
RR-1309-GY
RR-1311-GY
RR-1609-GY
RR-1611-GY
RR-1613-GY
RR-2113-GY
RR-2116-GY
RR-2921-GY
RR-3629-GY
Adapter
Type
Nickel Plated Brass
Male
Thread
A
Gray Nylon - Thread Reducers: Metric to Metric Threads*
Part Numbers
Threads
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
Dimensions in Inches (mm)
T
H
D
W
Height
C
C
C
C
C
C
C
Thread
Length
.35 (9)
.35 (9)
.39 (10)
.47 (12)
.47 (12)
.55 (14)
.59 (15)
Outer
Diameter
.94 (24)
1.06 (27)
1.26 (32)
1.57 (40)
2.01 (51)
2.40 (61)
2.95 (75)
Wrench
Flat
.87 (22)
.94 (24)
1.14 (29)
1.42 (36)
1.81 (46)
2.17 (55)
2.56 (65)
.63 (16)
.63 (16)
.67 (17)
.75 (19)
.75 (19)
.83 (21)
.87 (22)
Type B
D
B
W
H
T
Adapter,Reducer,Enlarger
Female
Thread
B
Adapter
Type
Accessories
RR-1612-GY
RR-2016-GY
RR-2520-GY
RR-3225-GY
RR-4032-GY
RR-5040-GY
RR-6350-GY
Male
Thread
A
A
Operating Temperature (Gray Nylon Reducers): -40 °F to 176 °F (-40 °C to 80 °C)
Black Nylon - Thread Reducers: Metric to Metric Threads*
Part Numbers
RM-1612-BK
RM-2016-BK
RM-2520-BK
RM-3225-BK
RM-4032-BK
RM-5040-BK
RM-6350-BK
Type C
Black Nylon
B
W
H
T
Threads
Male
Thread
A
Female
Thread
B
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
Adapter
Type
Dimensions in Inches (mm)
T
H
D
W
Height
C
C
C
C
D
D
D
Thread
Length
.31 (8)
.31 (8)
.31 (8)
.39 (10)
.59 (15)
.59 (15)
.59 (15)
Inner
Diameter
.39 (10)
.53 (13.5)
.71 (18)
.91 (23)
1.18 (30)
1.50 (38)
1.89 (48)
Wrench
Flat
.79 (20)
.98 (25)
1.14 (29)
1.42 (36)
N/A
N/A
N/A
.24 (6)
.24 (6)
.24 (6)
.24 (6)
.20 (5)
.20 (5)
.20 (5)
Conduit System
Type C
Gray Nylon
Black Polypropylene - Thread Reducers: NPT to NPT Threads*
Part Numbers
Type D
T
*Note: O-Ring not Included
See page 49 for thread specifications.
D
A
RB-3412-02
RB-3438-02
RB-1012-02
RB-1034-02
RB-1214-02
RB-1238-02
Male
Thread
A
Female
Thread
B
3/4” NPT
3/4” NPT
1” NPT
1” NPT
1/2” NPT
1/2” NPT
1/2” NPT
3/8” NPT
1/2” NPT
3/4” NPT
1/4” NPT
3/8” NPT
Adapter
Type
C
C
C
C
C
C
Dimensions in Inches (mm)
T
H
D
Thread
Length
.64 (16.2)
.63 (15.9)
.65 (16.5)
.65 (16.5)
.57 (14.4)
.57 (14.6)
Height
Inner
Diameter
.70 (17.7)
.70 (17.7)
.91 (23.1)
.92 (23.4)
.56 (14.2)
.56 (14.2)
.89 (22.5)
.88 (22.2)
.90 (22.9)
.90 (22.9)
.81 (20.7)
.82 (20.9)
Other Products / Index
H
Threads
37
Dimensions and specifications may be changed without prior notice.
Technical Information
Operating Temperature (Black Nylon/Polypropylene Reducers): -4 °F to 176 °F (-20 °C to 80 °C)
D
A
B
Nylon Strain Relief
Accessories - Thread Reducers - Nylon &
Polypropylene - (Hex & Round) - PG/NPT/Metric
w w w. s e a l c o nu s a . c o m
303 Stainless Steel Thread Reducers: Metric to Metric Threads
Part Numbers
-4 °F to 203 °F
(-20 °C to 95 °C)
without O-Ring
RM-1612-SS
RM-2012-SS
RM-2016-SS
RM-2516-SS
RM-2520-SS
RM-3216-SS
RM-3220-SS
RM-3225-SS
RM-4020-SS
RM-4025-SS
RM-4032-SS
RM-5025-SS
RM-5032-SS
RM-5040-SS
RM-6332-SS
RM-6340-SS
RM-6350-SS
Conduit System
Technical Information
Other Products / Index
with Buna-N
O-Ring
RM-1612-SS-B
RM-2012-SS-B
RM-2016-SS-B
RM-2516-SS-B
RM-2520-SS-B
RM-3216-SS-B
RM-3220-SS-B
RM-3225-SS-B
RM-4020-SS-B
RM-4025-SS-B
RM-4032-SS-B
RM-5025-SS-B
RM-5032-SS-B
RM-5040-SS-B
RM-6332-SS-B
RM-6340-SS-B
RM-6350-SS-B
Threads
Male
Thread
A
Female
Thread
B
M16 x 1.5
M20 x 1.5
M20 x 1.5
M25 x 1.5
M25 x 1.5
M32 x 1.5
M32 x 1.5
M32 x 1.5
M40 x 1.5
M40 x 1.5
M40 x 1.5
M50 x 1.5
M50 x 1.5
M50 x 1.5
M63 x 1.5
M63 x 1.5
M63 x 1.5
M12 x 1.5
M12 x 1.5
M16 x 1.5
M16 x 1.5
M20 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
Dimensions in Inches (mm)
W
T
H
Wrench
Flat
Thread
Length
Height
.67 (17)
.87 (22)
.87 (22)
1.06 (27)
1.06 (27)
1.34 (34)
1.34 (34)
1.34 (34)
1.46 (43)
1.46 (43)
1.46 (43)
2.17 (55)
2.17 (55)
2.17 (55)
2.56 (65)
2.56 (65)
2.56 (65)
.20 (5)
.24 (6)
.24 (6)
.28 (7)
.28 (7)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.35 (9)
.35 (9)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.35 (9)
.37 (9.5)
.37 (9.5)
.41 (10.5)
.41 (10.5)
.49 (12.5)
.49 (12.5)
.49 (12.5)
.51 (13)
.51 (13)
.51 (13)
.59 (15)
.59 (15)
.59 (15)
.65 (16.5)
.65 (16.5)
.65 (16.5)
The 316L material is much harder
and ideal for direct exposure
to salt water and chemical
solutions in marine, off-shore,
pharmaceutical, etc.
316L Stainless Steel Reducers
are produced upon request only.
Please allow for longer delivery
times!
Adapter, Reducer & Enlarger Applications:
• International machine builder & equipment
• Import / Export oriented projects
• Adapting to domestic markets
Adapter,Reducer,Enlarger
Accessories
PVDF / Steel
Nickel Plated Brass
Nylon Strain Relief
Accessories - Thread Reducers (303) Stainless Steel
(Hex) - PG/Metric Threads
303 Stainless Steel Thread Reducers: PG to PG Threads
Part Numbers
-4 °F to 203 °F
(-20 °C to 95 °C)
without O-Ring
RP-0907-SS
RP-1107-SS
RP-1109-SS
RP-1309-SS
RP-1311-SS
RP-1609-SS
RP-1611-SS
RP-1613-SS
RP-2111-SS
RP-2113-SS
RP-2116-SS
RP-2916-SS
RP-2921-SS
RP-3621-SS
RP-3629-SS
RP-4229-SS
RP-4236-SS
RP-4836-SS
RP-4842-SS
with Buna-N
O-Ring
RQ-0907-SS
RQ-1107-SS
RQ-1109-SS
RQ-1309-SS
RQ-1311-SS
RQ-1609-SS
RQ-1611-SS
RQ-1613-SS
RQ-2111-SS
RQ-2113-SS
RQ-2116-SS
RQ-2916-SS
RQ-2921-SS
RQ-3621-SS
RQ-3629-SS
RQ-4229-SS
RQ-4236-SS
RQ-4836-SS
RQ-4842-SS
Threads
Male
Thread
A
Female
Thread
B
PG 9
PG 7
PG 11
PG 7
PG 11
PG 9
PG 13 / 13.5
PG 9
PG 13 / 13.5
PG 11
PG 16
PG 9
PG 16
PG 11
PG 16
PG 13 / 13.5
PG 21
PG 11
PG 21
PG 13 / 13.5
PG 21
PG 16
PG 29
PG 16
PG 29
PG 21
PG 36
PG 21
PG 36
PG 29
PG 42
PG 29
PG 42
PG 36
PG 48
PG 36
PG 48
PG 42
Dimensions in Inches (mm)
W
T
H
Wrench
Flat
Thread
Length
Height
.67 (17)
.87 (22)
.87 (22)
.87 (22)
.87 (22)
.94 (24)
.94 (24)
.94 (24)
1.18 (30)
1.18 (30)
1.18 (30)
1.57 (40)
1.57 (40)
1.97 (50)
1.97 (50)
2.24 (57)
2.24 (57)
2.52 (64)
2.52 (64)
.24 (6)
.24 (6)
.24 (6)
.26 (6.5)
.26 (6.5)
.26 (6.5)
.26 (6.5)
.26 (6.5)
.28 (7)
.28 (7)
.28 (7)
.31 (8)
.31 (8)
.35 (9)
.35 (9)
.39 (10)
.39 (10)
.39 (10)
.39 (10)
.34 (8.8)
.35 (9)
.35 (9)
.37 (9.5)
.37 (9.5)
.37 (9.5)
.37 (9.5)
.37 (9.5)
.41 (10.3)
.41 (10.3)
.41 (10.3)
.45 (11.5)
.45 (11.5)
.49 (12.5)
.49 (12.5)
.53 (13.5)
.53 (13.5)
.53 (13.5)
.53 (13.5)
Buna-N O-Rings can be substituted with Silicone or FPM O-Rings (see page 30).
To order, add “-S” (Silicone) or “-V” (FPM) to part number (e.g. RM-1612-SS-V)
38
Dimensions and specifications may be changed without prior notice.
W
H
T
Also available with the
following approvals:
www.sealconex.com
For inquiries - Please call our Inside
Technical Sales Department
(800-456-9012 or 303-699-1135).
More custom parts available online at
www.sealconusa.com or upon request!
See page 49 for thread specifications.
w w w. s e a l c o nu s a . c o m
Black Nylon/Polypropylene* - Thread Enlargers:
Metric to Metric Threads*
Part Numbers
B
W
H
T
EM-1216-BK
EM-1620-BK
EM-2025-BK
EM-2532-BK
EM-3240-BK
EM-4050-BK
EM-5063-BK
Female
Thread
B
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
Adapter
Type
T
Dimensions in Inches (mm)
H
Height
A
A
A
C*
C*
C*
C*
Thread
Length
.31 (8)
.31 (8)
.31 (8)
.59 (15)
.59 (15)
.59 (15)
.59 (15)
D
W
Inner
Wrench
Diameter
Flat
.47 (12) .26 (6.5) .83 (21)
.51 (13)
.35 (9)
.98 (25)
.59 (15) .55 (14) 1.18 (30)
.59 (15) .65 (16.5)
N/A
.77 (19.5) .91 (23)
N/A
.77 (19.5) 1.18 (30)
N/A
.79 (20) 1.54 (39)
N/A
Type C
*Note: Parts are made
of Polypropylene.
B
H
Nickel Plated Brass - Thread Enlargers: PG to PG Threads*
Part Numbers
Outer
Diameter
.67 (17)
.79 (20)
Thread
Length
.20 (5)
.24 (6)
Height
.59 (15)
.65 (16.5)
.87 (22)
.24 (6)
.69 (17.5)
.87 (22)
.24 (6)
.69 (17.5)
.94 (24)
1.18 (30)
.24 (6)
.24 (6)
.73 (18.5)
.81 (20.5)
PG 16
.94 (24)
.26 (6.5)
.75 (19)
PG 21
1.18 (30)
.26 (6.5)
.83 (21)
PG 21
PG 29
PG 29
PG 36
PG 42
PG 48
1.18 (30)
1.54 (39)
1.54 (39)
1.97 (50)
2.24 (57)
2.52 (64)
.26 (6.5)
.26 (6.5)
.28 (7)
.31 (8)
.35 (9)
.39 (10)
.83 (21)
.88 (22.5)
.91 (23)
1.08 (27.5)
1.22 (31)
1.30 (33)
EP-0709-BR
EP-0911-BR
PG 7
PG 9
EP-0913-BR
PG 9
EP-1113-BR
PG 11
EP-1116-BR
EP-1121-BR
PG 11
PG 11
PG 13 /
13.5
PG 13 /
13.5
PG 16
PG 16
PG 21
PG 29
PG 36
PG 42
PG 9
PG 11
PG 13 /
13.5
PG 13 /
13.5
PG 16
PG 21
EP-1321-BR
EP-1621-BR
EP-1629-BR
EP-2129-BR
EP-2936-BR
EP-3642-BR
EP-4248-BR
D
A
Is your thread size off
by one size?
These Enlargers will
solve that threading
problem.
They convert holes
which fit PG, NPT or
Metric threads to a
larger female thread of
the same thread type.
Adapter,Reducer,Enlarger
H
Accessories
T
Female
Thread
B
T
Dimensions in Inches (mm)
D
Male
Thread
A
EP-1316-BR
D
B
Threads
PVDF / Steel
Operating Temperature (Nylon/Polypropylene Enlargers): -4 °F to 176 °F (-20 °C to 80 °C)
D
A
Nickel Plated Brass
Type A
Threads
Male
Thread
A
Nylon Strain Relief
Accessories - Thread Enlargers - Nylon, Polypropylene
& Nickel Plated Brass - (Hex) - PG/Metric Threads
Nickel Plated Brass - Thread Enlargers: Metric to Metric Threads*
H
A
Male
Thread
A
Female
Thread
B
M12 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
M40 x 1.5
M50 x 1.5
M63 x 1.5
Dimensions in Inches (mm)
D
T
H
Outer
Diameter
.71 (18)
.87 (22)
1.06 (27)
1.34 (34)
1.65 (42)
2.09 (53)
2.60 (66)
Thread
Length
.20 (5)
.24 (6)
.26 (6.5)
.26 (6.5)
.28 (7)
.35 (9)
.35 (9)
Height
.59 (15)
.69 (17.5)
.75 (19)
.83 (21)
.91 (23)
1.22 (31)
1.22 (31)
More custom parts available
online at www.sealconusa.com
or upon request!
Technical Information
EM-1216-BR
EM-1620-BR
EM-2025-BR
EM-2532-BR
EM-3240-BR
EM-4050-BR
EM-5063-BR
Threads
Conduit System
Part Numbers
T
Nickel Plated Brass - Thread Enlargers: NPT to NPT Threads*
Part Numbers
Threads
EN-3812-BR
EN-1234-BR
EN-1210-BR
EN-3410-BR
EN-1054-BR
Female
Thread
B
3/8” NPT 1/2” NPT
1/2” NPT 3/4” NPT
1/2” NPT
1” NPT
3/4” NPT
1” NPT
1” NPT 1-1/4” NPT
D
T
H
Outer
Diameter
1.10 (28)
1.10 (28)
1.36 (34.5)
1.38 (35)
1.73(44)
Thread
Length
.59 (15)
.79 (20)
.79 (20)
.71 (18)
.94 (24)
Height
1.50 (38)
1.50 (38)
1.75 (44.5)
1.69 (43)
1.97 (50)
Optional Locking Nuts, O-Rings
& Other Accessories starting
on Page 28 - 39.
*Note: O-Ring not Included
See page 49 for thread specifications.
Dimensions and specifications may be changed without prior notice.
39
Other Products / Index
Male
Thread
A
Dimensions in Inches (mm)
Nylon Strain Relief
Nickel Plated Brass
PVDF / Steel
Conduit System
Introduction
w w w. s e a l c o nu s a . c o m
Electrical Conduit provides protection to enclosed single or multi-conductors from impact, moisture, and chemical vapors. Varying quantities,
sizes, and types of conductors can be pulled into a Conduit, which simplifies design and construction compared to multiple runs of cables or
the expense of customized composite cables. Conduit Systems can be made waterproof.
Cable connections between fixed and moving parts are weak
spots in machine & system installations. When cables are bent,
individual tensioned conductors have no room for flexing.
They are subjected to high and variable tension forces,
particularly multi-conductor cables. To prevent conductor
breakages, the use of Conduit tubing is recommended.
Advantages:
• Individual conductors are given sufficient
flexibility. This prevents tension stress.
• Connections provide security against
penetration of fluids.
**
Technical Information
Push-In Fittings
- 4ºF to 176ºF (- 20ºC to 80ºC)
Turn-to-Seal Fittings
- 40ºF to 230ºF (- 40ºC to 110ºC)
Snapclic DUO Nylon
- 40ºF to 212ºF (- 40ºC to 100ºC )
Snapclic DUO Brass
- 40ºF to 212ºF (- 40ºC to 100ºC )
Double-Seal Fittings
- 40ºF to 230ºF (- 40ºC to 110ºC)
Flange/Bulkhead Fittings
- 40°F to 230°F (- 40°C to 110°C)
Standard Conduit
- 40ºF to 230ºF (- 40ºC to 110ºC )
Standard Conduit (SM-0811-BK )
- 40ºF to 140ºF (- 40ºC to 60ºC)
Super-Flex Conduit
- 58ºF to 320ºF (- 50ºC to 160ºC)
Conduit System - Corrugated Conduit
(Standard & Super Flex)
**
Conduit
System
Corrugated
Conduit: (Standard & Super-Flex)
This STANDARD Corrugated
Conduit is suitable for static and
moderate dynamic installations.
Part Numbers
The SUPER-FLEX Conduit is
made of a special plastic blend.
Due to its higher flexibility, it is
an ideal solution for drag chain
and robotics applications. The
Conduit has a UL HB 22.86
LBF/in = Crush Resistance
Flammability Rating.
B A
-40 °F to 230 °F
(-40 °C to 110 °C)
-58 °F to 320 °F
(-50 °C to 160 °C)
Standard
Modified
Polyamide PA
SuperFlex
Thermoplastic
Elastomer
**SM-0811-BK
SM-1013-BK
SM-1216-BK
SM-1419-BK
SM-1721-BK
SM-2328-BK
SM-2934-BK
SM-3642-BK
SM-4854-BK
SM-1013-HY
SM-1216-HY
SM-1721-HY
SM-2328-HY
SM-2934-HY
SM-3642-HY
SM-4854-HY
Nominal
Conduit
Size
Roll
Length
(feet)*
8
10
12
14
17
23
29
37
50
164
164
164
164
164
164
82
82
82
Dimensions
Fits Turn-to-Seal Fittings
Inner Dia.(A) x
Outer Dia.(B)
Inches (mm)
ST, ET, SM & EM
See page
42 for thread
specs
.33 x .45 (8.5 x 11.4)
PG 7, 1/4” NPT
.39 x .51 (9.9 x 12.9) PG 7, 3/8” NPT, PG 9, M16
.48 x .62 (12.2 x 15.7)
PG 11, 3/8” NPT
.55 x .73 (14 x 18.5)
PG 13 / 13.5, M20
.65 x .83 (16.6 x 21)
PG 16, 1/2” NPT
.88 x 1.12 (22.4 x 28.4)
PG 21, 3/4” NPT, M25
1.11 x 1.36 (28.3 x 34.5)
PG 29, 1” NPT, M32
1.40 x 1.67 (35.5 x 42.3)
PG 36, 1-1/4” NPT
1.87 x 2.13 (47.5 x 54.2)
PG 48, 2” NPT
* Note: 164’ = 50 m.
*Note: CE Approval applies to SuperFlex Thermoplastic Elastomer
and Standard Nominal Conduit Size 8 (SM-0811-BK)
**Note: UR and CSA approvals apply to Standard Nominal Conduit
Size 8 (SM-0811-BK). This Conduit also has UL HB.
Conduit System
Adapter,Reducer,Enlarger
Accessories
*
Other Products / Index
Operating Temperatures
Conduit System - Mounting Brackets
Snap-In Fittings
Mount Holds conduit securely in
place. Material: Polyamide PA 6
• V0 Rated
Mounting Brackets: Snap-In - Nylon
Part Numbers
-40 °F to 230 °F
(-40 °C to 110 °C)
C
Fits
Nominal
Conduit
Size
Dimensions
A
B
C
D
E
Width
Length
Height
Mounting
Hole ø
Mounting
Hole
Recess ø
10
12
17
23
29
37
50
.49 (12.5)
.49 (12.5)
.59 (15)
.63 (16)
.63 (16)
.71 (18)
.75 (19)
1.18 (30)
1.18 (30)
1.38 (35)
1.65 (42)
2.01 (51)
2.40 (61)
2.91 (74)
.91 (23)
.91 (23)
1.18 (30)
1.50 (38)
1.69 (43)
2.01 (51)
2.52 (64)
.16 (4)
.16 (4)
.20 (5)
.24 (6)
.24 (6)
.24 (6)
.24 (6)
.33 (8.5)
.33 (8.5)
.41(10.5)
.43 (11)
.45 (11.5)
.53 (13.5)
.53 (13.5)
B
A
E
D
Available with the following approvals:
www.sealconex.com
40
MB-09-BK
MB-11-BK
MB-16-BK
MB-21-BK
MB-29-BK
MB-36-BK
MB-48-BK
• Quick assembly thanks to single-hole fixing
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
• Simply snaps into conduit
w w w. s e a l c o nu s a . c o m
Push-In Conduit Fittings: Straight & Elbow - Nylon
Part Numbers
-4 °F to 176 °F (-20 °C to 80 °C)
Elbow*
Fits
Nominal
Conduit
Size
See page
49 for thread
specs
SM09NA-BK
SM16NA-BK
SM21NA-BK
SM29NA-BK
EM09NA-BK
EM16NA-BK
EM21NA-BK
EM29NA-BK
SM16MA-BK
SM20MA-BK
SM25MA-BK
SM32MA-BK
EM16MA-BK
EM20MA-BK
EM25MA-BK
EM32MA-BK
B
C
Thread
Length
Body
Length
D
A
E
F
G
H
Body
Height
Body
Length
Wrench
Flat
1.69 (43)
1.89 (48)
2.04 (52)
2.20 (56)
2.76 (70)
3.27 (83)
-
.91 (23)
1.06 (27)
1.20 (30.5)
1.28 (32.5)
1.57 (40)
2.03 (51.5)
-
.75 (19)
.87 (22)
.94 (24)
1.06 (27)
1.30 (33)
1.65 (42)
-
Wrench Clearance Thread
Flat
Hole
Length
+ .01”
(+.25 mm)
10
12
14
17
23
29
37
50
.60 (15.2)
.73 (18.5)
.80 (20.3)
.88 (22.3)
1.12 (28.4)
1.47 (37.3)
1.85 (47)
2.34 (59.4)
.31 (8)
.31 (8)
.35 (9)
.39 (10)
.43 (11)
.43 (11)
.51 (13)
.55 (14)
.91 (23)
.98 (25)
1.10 (28)
1.14 (29)
1.26 (32)
1.38 (35)
1.61 (41)
1.81 (46)
.67 (17)
.83 (21)
.94 (24)
1.06 (27)
1.38 (35)
1.65 (42)
1.97 (50)
2.52 (64)
.60 (15.2)
.73 (18.5)
.80 (20.3)
.88 (22.3)
1.12 (28.4)
1.47 (37.3)
-
.31 (8)
.31 (8)
.35 (9)
.39 (10)
.43 (11)
.43 (11)
-
3/8” NPT
1/2” NPT
3/4” NPT
1” NPT
10
17
23
29
.68 (17.2)
.83 (21.1)
1.05 (26.7)
1.35 (34.3)
.60 (15)
.51 (13)
.51 (13)
.59 (15)
.91 (23)
1.14 (29)
1.26 (32)
1.38 (35)
.67 (17)
1.06 (27)
1.38 (35)
1.65 (42)
.68 (17.2)
.83 (21.1)
1.05 (26.7)
1.35 (34.3)
.60 (15) 1.69 (43) .91 (23) .75 (19)
.51 (13) 2.20 (56) 1.28 (32.5) 1.06 (27)
.51 (13) 2.76 (70) 1.57 (40) 1.30 (33)
.59 (15) 3.27 (83) 2.03 (51.5) 1.65 (42)
M16 x 1.5
M20 x 1.5
M25 x 1.5
M32 x 1.5
10
14
23
29
.63 (16)
.79 (20)
.98 (25)
1.26 (32)
.31 (8)
.35 (9)
.43 (11)
.43 (11)
.91 (23)
1.10 (28)
1.26 (32)
1.38 (35)
.67 (17)
.94 (24)
1.38 (35)
1.65 (42)
.63 (16)
.79 (20)
.98 (25)
1.26 (32)
.31 (8)
.35 (9)
.43 (11)
.43 (11)
1.69 (43) .91 (23) .75 (19)
2.04 (52) 1.20 (30.5) .94 (24)
2.76 (70) 1.57 (40) 1.30 (33)
3.27 (83) 2.03 (51.5) 1.65 (42)
*O-Rings Included on Elbow Fittings
O-Ring Groove
Wrench
Flat (D)
SM - (Straight) Push-In Conduit Fittings
The fastest and most labor saving method to connect flexible Nylon
Conduit to a Push-in Fitting. The Nylon Conduit is inserted into the
Fitting until the hook snaps over the ridge of the Corrugated Tubing.
The Conduit can be mounted rigid or turnable.
• IP 54 rating can be obtained with an O-Ring
• IP 65 rating can be obtained with a Fixed Installation
EM - (90° Snap Elbows) Push-In Conduit Fittings
C
B
F
G
Conduit System
A combination of a unique 90° Snap Elbow and Straight
Push-in Fitting. Elbow Fittings snap open & closed for easy
installation of wires.
Adapter,Reducer,Enlarger
Locking Ridge Inside
Accessories
EM09AA-BK
PG 9
EM11AA-BK
PG 11
EM13AA-BK PG 13 / 13.5
EM16AA-BK
PG 16
EM21AA-BK
PG 21
EM29AA-BK
PG 29
PG 36
PG 48
A
Clearance
Hole
Elbow Fitting - Dimensions
in Inches (mm)
PVDF / Steel
SM09AA-BK
SM11AA-BK
SM13AA-BK
SM16AA-BK
SM21AA-BK
SM29AA-BK
SM36AA-BK
SM48AA-BK
Straight Fittings - Dimensions
in Inches (mm)
Nickel Plated Brass
Straight
Thread
Type
& Size
Nylon Strain Relief
Conduit System - Push-In Conduit Fittings
Straight & Elbow - PG/NPT/Metric Threads
Wrench
Flat (H)
E
A
Suggested Clearance
Hole for Non-Threaded
Mounting
Technical Information
Optional Locking Nuts, O-Rings
& Other Accessories starting
on Page 28 - 39.
Other Products / Index
SM & EM Fittings feature a Locking Ridge to hold Conduit
Tubing in place.
They also have an O-Ring groove for optional O-Ring
installation.
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
41
Nylon Strain Relief
Nickel Plated Brass
PVDF / Steel
Accessories
w w w. s e a l c o nu s a . c o m
The Turn-to-Seal family consists of Conduit Fittings manufactured from high-grade polyamide. This design means
that the Fittings offer a high protection rating of IP 65 (NEMA 4). The Fittings are completely pre-assembled and no
additional parts such as cap nuts and clamping rings need to be fitted, ensuring reliability in assembly. The cable
protection Conduit can be assembled quickly and easily by simply inserting the Conduit and turning the cap nut. The
Elbow has smooth inside walls, making the installation of cables & wires easy. V0 Rated!
Turn-To-Seal Conduit Fittings: Straight & Elbow - Nylon
Part Numbers
-40 °F to 230 °F (-40 °C to 110 °C)
Thread
Type
& Size
Fits
Nominal
Conduit
Size
See page
49 for thread
specs
Straight Fitting - Dimensions in Inches (mm)
A
B
Thread
Length
Body
Length
Straight
Elbow
ST07AA-BK
ST07AR-BK
ST09AA-BK
ST11AA-BK
ST16AA-BK
ST21AA-BK
ST29AA-BK
ST36AA-BK
ST48AA-BK
ET09AA-BK
ET11AA-BK
ET16AA-BK
ET21AA-BK
ET29AA-BK
-
PG 7
PG 7
PG 9
PG 11
PG 16
PG 21
PG 29
PG 36
PG 48
10
8
10
12
17
23
29
37
50
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.31 (8)
.39 (10)
.39 (10)
.59 (15)
.59 (15)
ST11NA-BK
ST16NA-BK
ST21NA-BK
ST29NA-BK
ST36NA-BK
ET11NA-BK
ET16NA-BK
ET21NA-BK
ET29NA-BK
-
3/8” NPT
1/2” NPT
3/4” NPT
1” NPT
1-1/4” NPT
12
17
23
29
37
.55 (14)
.51 (13)
.55 (14)
.75 (19)
.71 (18)
C
D
Wrench Wrench
Flat
Flat
Elbow - Dimensions in Inches (mm)
E
F
G
H
I
J
Inside
Diameter
Thread
Length
Elbow
Length
Elbow
Height
Wrench
Flat
Inside
Diameter
(Body)
(Dome)
(Dome)
1.02 (26)
1.02 (26)
1.02 (26)
1.02 (26)
1.02 (26)
1.34 (34)
1.34 (34)
1.73 (44)
1.97 (50)
.75 (19)
.75 (19)
.75 (19)
.87 (22)
1.06 (27)
1.50 (38)
1.81 (46)
2.17 (55)
2.55 (65)
.87 (22)
.87 (22)
.87 (22)
.94 (24)
1.18 (30)
1.50 (38)
1.81 (46)
2.40 (61)
2.91 (74)
1.02 (26)
1.02 (26)
1.22 (31)
1.25 (32)
1.73 (44)
.87 (22)
1.06 (27)
1.46 (37)
1.81 (46)
2.17 (55)
.94 (24) .47 (12)
1.18 (30) .55 (14)
1.50 (38) .75 (19)
1.81 (46) 1.02 (26)
2.40 (61) 1.38 (35)
.33 (8.5)
.33 (8.5)
.43 (11) .30 (7.5) 1.77 (45) 1.06 (27)
.55 (14) .31 (8) 2.01 (51) 1.14 (29)
.67 (17) .39 (10) 2.20 (56) 1.38 (35)
.91 (23) .43 (11) 2.64 (67) 1.61 (41)
1.22 (31) .47 (12) 3.23 (82) 2.09 (53)
1.57 (40)
2.01 (51)
.31 (8)
.39 (10)
.43 (11)
.47 (12)
-
2.01 (51)
2.20 (56)
2.64 (67)
3.23 (82)
-
1.14 (29)
1.38 (35)
1.61 (41)
2.09 (53)
-
.87 (22) .37 (9.5)
.94 (24) .51 (13)
1.18 (30) .63 (16)
1.50 (38) .87 (22)
1.81 (46) 1.14 (29)
.94 (24) .51 (13)
1.18 (30) .63 (16)
1.50 (38) .83 (21)
1.81 (46) 1.06 (27)
-
Straight 2” NPT Also Available
ST & ET Fittings are V0 rated & have IP 65 protection without additional parts (O-Ring or Seal Ring).
B
ST - (Straight) Turn-To-Seal Conduit Fittings
• Reliable assembly as fitting is supplied pre-assembled.
No additional parts required
• Integrated clamping ring ensures high tear-out strength
• High protection to IP 65 (NEMA 4) without additional parts
• Can be opened without tools
Conduit System
Adapter,Reducer,Enlarger
Conduit System - Turn-to-Seal Conduit Fittings
Straight & Elbow - PG/NPT Threads
A
E
Wrench
Flat (D)
Optional Locking Nuts,
O-Rings & Other
Accessories starting
on page 28 & 29.
Wrench
Flat (C)
G
ET - (90° Angled Elbow) Turn-To-Seal Conduit Fittings
Technical Information
•
•
•
•
•
•
Reliable assembly as fitting is supplied pre-assembled.
No additional parts required
Integrated clamping ring ensures high tear-out strength
High protection to IP 65 without additional parts
Can be opened without tools
Smooth inside walls, therefore easy insertion of the cables into the
90° angle
Other Products / Index
Advantages:
•
•
•
•
•
42
H
Wrench
Flat (I)
F
J
The interior surface is
smooth to prevent the
cable from catching
while feeding through.
Protection rating of IP 65 (NEMA 4)
One-part fitting
Rapid assembly
High pull-out resistance
Inner contours of 90° fittings are rounded
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
*Note: PCT Approval only applies to Metal Fittings.
Part Numbers
IP 54
(Conduit Side)
The DUO is an integrated Strain
Relief / Conduit solution.
Optional Locking Nuts,
O-Rings & Other Accessories
starting on page 28.
Dimensions
Fits
Nominal
A
B
C
D
Conduit
Thread
Body
Outer
Hole
O.D.
Size
+ .01”
Length Length Diameter
(+.25 mm)
10
.73 (18.5) .31 (8) 1.65 (42)
.98 (25)
.87 (22)
PG 13 /
13.5
12
.80 (20.3) .35 (9) 1.73 (44)
.98 (25)
.94 (24)
PG 16
14
.88 (22.3) .39 (10) 1.81 (46) 1.18 (30) 1.06 (27)
PG 21
17
1.12 (28.4) .43 (11) 1.97 (50) 1.38 (35) 1.30 (33)
PG 29
23
1.47 (37.3) .43 (11) 2.36 (60) 1.65 (42) 1.65 (42)
PG 36
29
1.85 (47) .51 (13) 2.36 (60) 1.97 (50) 2.09 (53)
10
.63 (16)
.31 (8) 1.65 (42)
.98 (25)
.87 (22)
12
.79 (20)
.35 (9) 1.73 (44)
.98 (25)
.94 (24)
14
.79 (20)
.39 (10) 1.81 (46) 1.18 (30) 1.06 (27)
17
.98 (25)
.43 (11) 1.97 (50) 1.38 (35) 1.30 (33)
23
1.26 (32) .43 (11) 2.36 (60) 1.65 (42) 1.65 (42)
29
1.57 (40) .51 (13) 2.36 (60) 1.97 (50) 2.09 (53)
DUO16MA-BK .20 - .39 (5 - 10)
M16 x 1.5
DUO16MR-BK
.12 - .28 (3 - 7)
DUO20MA-BK .24 - .47 (6 - 12)
M20 x 1.5
DUO20MR-BK
.20 - .35 (5 - 9)
DUO22MA-BK .39 - .55 (10 - 14)
M20 x 1.5
DUO22MR-BK .28 - .47 (7 - 12)
DUO25MA-BK .51 - .63 (13 - 16)
M25 x 1.5
DUO25MR-BK .35 - .63 (9 - 16)
DUO32MA-BK .71 - .87 (18 - 22)
M32 x 1.5
DUO32MR-BK .51 - .79 (13 - 20)
DUO40MA-BK .87 - 1.10 (22 - 28)
M40 x 1.5
DUO40MR-BK .79 - 1.02 (20 - 26)
Also available in NPT and Elongated Threads.
Cable Range
-40 °F to 212 °F (-40 °C to 100 °C)
See page
49 for thread
specs
Dimensions
Fits
Nominal
A
B
C
D
Conduit
Body
Outer
Hole O.D. Thread
Size
+ .01”
Length
Length Diameter
(+.25 mm)
IP 54 (Conduit Side)
F1/F
10
.73 (18.5)
.24 (6) 1.52 (38.5) .91 (23)
.79 (20)
PG 13 /
13.5
12
.80 (20.3)
.24 (6) 1.56 (39.5) .98 (25)
.87 (22)
PG 16
14
.88 (22.3)
.24 (6) 1.63 (41.5) 1.14 (29) .94 (24)
PG 21
17
1.12 (28.4) .28 (7) 1.75 (44.5) 1.18 (30) 1.18 (30)
PG 29
23
1.47 (37.3) .31 (8) 2.07 (52.5) 1.54 (39) 1.57 (40)
PG 36
29
1.85 (47)
.31 (8)
10
.63 (16)
.24 (6) 1.52 (38.5) .91 (23)
Metal style comes
with O-Ring
IP 68 (10 bar)
(Installation Side)
Snapclic DUO Fittings (in metal) is
available with the following approvals:
Technical Information
PG 11
2.32 (59) 1.77 (45) 1.97 (50)
www.sealconex.com
.79 (20)
12
.79 (20)
.24 (6) 1.56 (39.5) .98 (25)
14
.79 (20)
.24 (6) 1.63 (41.5) 1.14 (29) .94 (24)
17
.98 (25)
.28 (7) 1.75 (44.5) 1.18 (30) 1.18 (30)
23
1.26 (32)
.31 (8) 2.07 (52.5) 1.54 (39) 1.57 (40)
29
1.57 (40)
.31 (8)
*Note: PCT (Gost) only applies to Metric Threads in Nickel Plated Brass Fittings.
A
.87 (22)
Suggested Clearance
Hole for Non-Threaded
Mounting
F1/F
Other Products / Index
DUO16MA-BR .20 - .39 (5 - 10)
M16 x 1.5
DUO16MR-BR
.12 - .28 (3 - 7)
DUO20MA-BR .24 - .47 (6 - 12)
M20 x 1.5
DUO20MR-BR
.20 - .35 (5 - 9)
DUO22MA-BR .39 - .55 (10 - 14)
M20 x 1.5
DUO22MR-BR .28 - .47 (7 - 12)
DUO25MA-BR .51 - .63 (13 - 16)
M25 x 1.5
DUO25MR-BR .35 - .63 (9 - 16)
DUO32MA-BR .71 - .87 (18 - 22)
M32 x 1.5
DUO32MR-BR .51 - .79 (13 - 20)
DUO40MA-BR .87 - 1.10 (22 - 28)
M40 x 1.5
DUO40MR-BR .79 - 1.02 (20 - 26)
Rotatable
Wrench
Flat
Conduit System
Inches (mm)
DUO11AA-BR .20 - .39 (5 - 10)
DUO11AR-BR
.12 - .28 (3 - 7)
DUO13AA-BR .24 - .47 (6 - 12)
DUO13AR-BR
.20 - .35 (5 - 9)
DUO16AA-BR .39 - .55 (10 - 14)
DUO16AR-BR .28 - .47 (7 - 12)
DUO21AA-BR .51 - .63 (13 - 16)
DUO21AR-BR .35 - .63 (9 - 16)
DUO29AA-BR .71 - .87 (18 - 22)
DUO29AR-BR .51 - .79 (13 - 20)
DUO36AA-BR .87 - 1.10 (22 - 28)
DUO36AR-BR .79 - 1.02 (20 - 26)
Thread
Type
& Size
D
2.32 (59) 1.77 (45) 1.97 (50)
C
B
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Adapter,Reducer,Enlarger
PG 11
Nickel Plated Brass - Snapclic DUO: Straight
Part Numbers
F1/F
Wrench
Flat
Accessories
B
C
Thread
Type
& Size
PVDF / Steel
Inches (mm)
DUO11AA-BK .20 - .39 (5 - 10)
DUO11AR-BK
.12 - .28 (3 - 7)
DUO13AA-BK .24 - .47 (6 - 12)
DUO13AR-BK
.20 - .35 (5 - 9)
DUO16AA-BK .39 - .55 (10 - 14)
DUO16AR-BK .28 - .47 (7 - 12)
DUO21AA-BK .51 - .63 (13 - 16)
DUO21AR-BK .35 - .63 (9 - 16)
DUO29AA-BK .71 - .87 (18 - 22)
DUO29AR-BK .51 - .79 (13 - 20)
DUO36AA-BK .87 - 1.10 (22 - 28)
DUO36AR-BK .79 - 1.02 (20 - 26)
IP 68 (10 bar)
(Installation Side)
D
Cable Range
-40 °F to 212 °F (-40 °C to 100 °C)
Rotatable
F1/F
w w w. s e a l c o nu s a . c o m
Nylon - Snapclic DUO: Straight - Nylon
Nickel Plated Brass
• Combination of Strain
Relief & Conduit Fittings
• Push-in system
• Rotatable
• Can be equipped with
Multi-Hole inserts
• Metal style can be
changed to EMI/RFI
• Metal Style also
available in ATEX
Nylon Strain Relief
Conduit System - Snapclic DUO - Straight
Nylon & Nickel Plated Brass - PG/Metric Threads
*
43
Nylon Strain Relief
Nickel
Nickel
Plated
Plated
Brass
Brass
LiquidTight
TightStrain
Strain
Relief
ReliefFittings
Fittings
Conduit
System
- Liquid
Double-Seal
&
Bulkhead
Fittings
Technical
Information
Nylon - Flange & PG/NPT/Metric Threads
w w w. s e a l c o nu s a . c o m
Advantages:
Double-Seal Fittings: Conduit & Cable Gland Combination
Part Numbers
-40 °F to 230 °F
(-40 °C to 110 °C )
Thread
Type
& Size
Cable
Range
Fits
Nominal
Conduit
Size
Dimensions
PVDF / Steel
Nickel Plated Brass
See page
49 for thread
specs
A
B
C
F1/F
Hole O.D.
Thread
Length
Body
Length
Wrench
Flat
+ .01”
(+.25 mm)
DS09AA-BK
DS11AA-BK
DS13AA-BK
DS16AA-BK
DS21AA-BK
Inches (mm)
PG 9
.16 - .31 (4 - 8)
PG 11 .20 - .39 (5 - 10)
PG 13 / 13.5 .24 - .47 (6 - 12)
PG 16 .39 - .55 (10 - 14)
PG 21 .51 - .71 (13 - 18)
10
12
17
17
23
.60 (15.2) .31 (8)
.73 (18.5) .31 (8)
.80 (20.3) .35 (9)
.88 (22.3) .39 (10)
1.12 (28.4) .43 (11)
1.77 (45)
.75 (19)
1.93 (49)
.87 (22)
2.05 (52) .95 (24) / 1.06 (27)
2.05 (52)
1.06 (27)
2.36 (60)
1.30 (33)
DS09NA-BK
DS13NA-BK
DS16NA-BK
DS21NA-BK
3/8” NPT .16 - .31 (4 - 8)
1/2” NPT .24 - .47 (6 - 12)
1/2” NPT .39 - .55 (10 - 14)
3/4” NPT .51 - .71 (13 - 18)
10
17
17
23
.68 (17.2)
.83 (21.1)
.83 (21.1)
1.05 (26.7)
.55 (14)
.51 (13)
.51 (13)
.55 (14)
1.77 (45) .87 (22) / .75 (19)
2.05 (52) .95 (24) / 1.18 (30)
2.05 (52)
1.06 (27)
2.36 (60)
1.30 (33)
DS16MA-BK
DS20MA-BK
DS25MA-BK
M16 x 1.5 .16 - .31 (4 - 8)
M20 x 1.5 .24 - .47 (6 - 12)
M25 x 1.5 .51 - .71 (13 - 18)
10
17
23
.63 (16)
.79 (20)
.98 (25)
.31 (8)
.35 (9)
.43 (11)
1.77 (45)
.75 (19)
1.97 (50) .95 (24) / 1.06 (27)
2.36 (60)
1.30 (33)
• Combined Conduit and Cable
Gland Fittings 2-in-1
• Clamping around entire
circumference, ensuring maximum
pull-out resistance
• No loose parts - Fitting does not
have to be dismantled for assembly
• High degree of protection
B
C
F1/F
A
Suggested Clearance
Hole for Non-Threaded
Mounting
Flange 1
D
C
D
Flange 2
IP 65
(Conduit Side)
C
E
Note: The design of the Bulkhead
Fittings changes depending on size.
Up to M25/PG 21 the Fitting has 3
screw holes, from size M32 / PG 29
the Fitting has 4 screw holes. (see
technical drawings)
A
A
Adapter,Reducer,Enlarger
Accessories
Bulkhead Conduit Fittings
B
B
E
(Technical Drawings for Bulkhead Fittings with and without Threads)
IP 68 (10 bar)
(Installation
Side)
• Bulkhead Fittings are manufactured from
high-grade Nylon (Polyamide). Flange seal
is Buna-N.
• Split system: large cut-out size allows for
quick & easy insertion of pre-assembled
cables into a housing.
• Protection rating: IP 54 / IP 65.
• V0 Rated
Bulkhead Conduit Fittings with Thread
Part Numbers
-40 °F to 230 °F
(-40 °C to 110 °C)
Thread Type
& Size
Dimensions in Inches (mm)
Flange
Conduit System
See page
49 for thread
specs
PG 11
PG 16
PG 21
PG 29
PG 36
PG 48
FL-11-BK
FL-16-BK
FL-21-BK
FL-29-BK
FL-36-BK
FL-48-BK
1
1
1
2
2
2
A
B
C
D
Length
Width
Height
Distance
between
Holes
1.46 (37)
1.46 (37)
2.03 (51.5)
2.54 (64.5)
3.13 (79.5)
3.44 (87.5)
1.93 (49) 1.85 (47)
1.93 (49) 1.85 (47)
2.72 (69) 2.56 (65)
3.54 (90) 3.07 (78)
3.94 (99) 3.70 (94)
4.57 (116) 3.98 (101)
1.38 (35)
1.38 (35)
1.73 (44)
2.17 (55)
2.60 (66)
2.99 (76)
E
*
Hole
Diameter Advantages (Threaded):
Split system enables pre-assembled cable
.17 (4.3) harnesses to be inserted by means of
.17 (4.3) removable upper part
.24 (6.0) • Easy assembly
.26 (6.5) • High stability
• Supplied with gasket for flange connection.
.26 (6.5)
• Internal thread for Metric and PG Fittings
.26 (6.5)
• Protection rating: IP 65.
Technical Information
*Note: UR Rating with Fitting.
Bulkhead Conduit Fittings without Thread
Part Numbers
-40 °F to 230 °F
(-40 °C to 110 °C)
Other Products / Index
FT-11-BK
FT-16-BK
FT-21-BK
FT-29-BK
FT-36-BK
FT-48-BK
44
44
Fits
Nominal
Conduit
Size
12
17
23
29
37
50
Dimensions in Inches (mm)
Flange
1
1
1
2
2
2
*
A
B
C
D
E
Length
Width
Height
Distance
between
Holes
1.46 (37)
1.46 (37)
2.03 (51.5)
2.54 (64.5)
3.13 (79.5)
3.44 (87.5)
Hole
Diameter
1.93 (49)
1.93 (49)
2.72 (69)
3.54 (90)
3.90 (99)
4.57 (116)
1.85 (47)
1.85 (47)
2.56 (65)
3.07 (78)
3.70 (94)
3.98 (101)
1.38 (35)
1.38 (35)
1.73 (44)
2.17 (55)
2.60 (66)
2.99 (76)
.17 (4.3)
.17 (4.3)
.24 (6.0)
.26 (6.5)
.26 (6.5)
.26 (6.5)
Advantages (Without Thread):
• Split system enables pre-assembled cable harnesses
to be inserted by means of removable upper part
• Easy assembly
• High stability
• Supplied with gasket for flange connection.
• Conduit remains rotatable
• Protection rating: IP 54.
Note: Screws not included.
For
ForMaterial
MaterialSpecifications
Specificationsand
andApproval
ApprovalInformation,
Information,please
pleaserefer
refertotopage
page45.
45. *Note: UR Rating with Conduit.
Dimensions and specifications may be changed without prior notice.
w w w.www.sealconusa.com
s e a l c o nu s a . c o m
Material, Temperature, Resistance, Pressure Rating & Color
Nylon
PVDF
Pressure Rating:
150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K
150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K
Materials:
Materials:
Fittings: Nylon 6/6 • V0 Rated - Flame resistant, Halogen and Phosphorous Free,
Self-extinguishing, Non-toxic, Fungus resistant
• Form Seal: Buna-N
• Clamping Insert: Nylon
• Optional O-Ring: Buna-N, FPM or Silicone
• Optional Seal Ring: Polyethylene or Fiber-Reinforced Plastic
Resistant to:
• Fittings: PVDF
• V0 Rated - Flame resistant, Halogen
& Phosphorous Free, Self-extinguishing,
Non-toxic, Fungus resistant
• Form Seal: FPM
• Clamping Insert: PVDF
• Optional O-Ring: FPM
Operating Temperature:
Nylon Fittings: -40 ºF to 212 ºF (-40 ºC to 100 ºC)
Nylon Fitting w/ Aluminum Clamp: -4 ºF to 158 ºF (-20 ºC to 70 ºC)
-31 ºF to 302 ºF (-35 ºC to 150 ºC)
• Black (RAL 9005)
• Gray (RAL 7035)
• Blue (RAL 5012)
(upon request)
All Black Nylon Fittings use
the new UL f1 (746C) material.
These products are ideally used
in Photovoltaic / Solar / Outdoor
applications requiring more
(UV / Ozone Stable) material.
Pressure Rating:
150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K
Materials:
Fittings: 303 Stainless Steel or 316L Stainless Steel
Form Seal: Buna-N (NBR) or FPM
Clamping Insert: PA (Nylon) or PVDF
O-Ring: Buna-N, FPM or Silicone
Operating Temperature:
Materials:
Buna-N: -40 ºF to 212 ºF (-40 ºC to 100 ºC)
PVDF: -31 ºF to 302 ºF (-35 ºC to 150 ºC)
•
•
•
•
•
•
EMI Feed-Through
Fittings: Nickel Plated Brass
Clamping Insert:
Spring (Flex Extension): 304 Stainless Steel Metal Coated Nylon
Form Seal: Buna-N (NBR) or FPM
Clamping Insert: PA (Nylon) or PVDF
O-Ring: Buna-N (NBR) FPM or Silicone optional
Optional Seal Ring: Polyethylene or Fiber-Reinforced Plastic
Operating Temperature:
Operating Temperatures
Operating Temperatures
-4 ºF to 176 ºF (-20 ºC to 80 ºC)
-40 ºF to 212 ºF (-40 ºC to 100 ºC)
-4 ºF to 203 ºF (-20 ºC to 95 ºC)
Operating Temperatures
• Buna-N (NBR)
• FPM
• Silicone (VMQ)
-22 ºF to 248 ºF (-30 ºC to 120 ºC)
-40 ºF to 392 ºF (-40 ºC to 200 ºC)
-76 ºF to 482 ºF (-60ºC to 250ºC)
• Polyethylene
• Fiber-reinforced Plastic
-22 ºF to 158 ºF (-30 ºC to 70 ºC)
-40 ºF to 572 ºF (-40 ºC to 300 ºC)
*
ULf1 (746C)
All Black Nylon (Dome & Flex) Strain
Relief Fittings, Cord Grips, Cable Glands
are now made with UV / Ozone Stable
material.
UL/UR*
CSA
VDE
CAGE
PATENT
E103997
074032
71339
ZERO UE114
4145075
Most of our standards products are also
available in EEx e & ATEX versions!
(Applies to all Strain Relief Fittings
and Locknuts)
Ex-tD
For more information, please visit our
Sealcon Ex website: www.sealconex.com
Call for Technical Assistance: 800-456-9012 / 303-699-1135
ForFor
Material
Specifications
andand
Approval
Information,
please
refer
to page
45.45.
Material
Specifications
Approval
Information,
please
refer
to page
Dimensions and specifications may be changed without prior notice.
45
Other
Other Products
Products // Index
Index
*The following Nylon and Nickel Plated Brass Strain Relief Fittings are
UR, but not UL listed:
Sizes 3/8” NPT, M12, M16, PG7, PG9, PG11 and Multi-Hole fittings.
The following Multi-Hole sizes are neither UL or UR rated:
Sizes 1/2” NPT-E, M16-E, M20-E, M40, M50, M63
V0 Flammability Rating
according to UL 94
Halogen, Pospherous
Free / Non-Toxic
- 40 ºF to 212 ºF (- 20 ºC to 100 ºC)
- 40 ºF to 212 ºF (- 40 ºC to 100 ºC)
- 40 ºF to 392 ºF (- 40 ºC to 200 ºC)
- 76 ºF to 482 ºF (- 60 ºC to 250 ºC)
Technical
Technical Information
Information
-4 °F to 212 °F (-20 °C to 100 °C)
-13 ºF to 392 ºF (-25 ºC to 200 ºC)
G”: -4 ºF to 212 ºF (-20 ºC to 100 ºC)
Metric: -40 ºF to 212 ºF (-40 ºC to 100 ºC)
Adapter, Reducer & Enlarger Materials
• Nylon/Polypropylene
• Nickel Plated Brass
w/ Buna-N O-Ring
• 303/316L Stainless Steel
w/ Buna-N O-Ring
Buna-N / TPE
Elastomer
FPM
Silicone (VMQ)
Conduit
Conduit System
System
Nickel Plated Brass - WADI
Materials
•
•
•
•
Operating Temperatures
Materials
Nylon Splines 6/6: V0 rated - Flame resistant, halogen and phosphorous free, self extinguishing, non-toxic, fungus resistant
• Mini WADI (Buna-N/TPE)
• Mini WADI (FPM)
• WADI XL (Buna-N)
Insert Materials
Materials
O-Ring & Seal Ring Materials
Buna-N: -40 ºF to 212 ºF (-40 ºC to 100 ºC)
PVDF: -31 ºF to 302 ºF (-35 ºC to 150 ºC)
Type
Adapter,Reducer,Enlarger
Adapter,Reducer,Enlarger
150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K
Accessories
Accessories
Pressure Rating:
Acid
Salt solution
Oxydant
Halogens
Alcohols
Chlorinated solvent
Aliphatic hydrocarbons
Petrol
Stainless Steel
•
•
•
•
Nickel Plated Brass
•
•
•
•
•
•
•
•
PVDF
PVDF // Steel
Steel
Operating Temperature:
Available Colors:
Nickel
Nickel Plated
Plated Brass
Brass
Pressure Rating:
Nylon Strain
Strain Relief
Relief
Nylon
Nickel
NickelPlated
PlatedBrass
Brass
Liquid
Liquid
Tight
TightStrain
StrainRelief
ReliefFittings
Fittings
Technical
Information
Specifications: Material, Temperature & Color
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
Brass
Liquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Technical
Information
NEMA Ratings: Description & Class
w w w. s e a l c o nu s a . c o m
NEMA Ratings - Overview
NEMA stands for the National Electrical Manufacturers Association.
It has established a range of standards for electrical equipment enclosures.
NEMA 1 General Purpose - Indoors
Nickel Plated Brass
Type 1 - intended for general purpose indoor use primarily to provide a degree of protection against contact with the enclosed equipment or locations
where unusual service conditions do not exist.
NEMA 2 Drip Proof - Indoors
Type 2 - intended for general purpose indoor use primarily to provide a degree of protection against limited amounts of falling water and dirt.
NEMA 3 Dust Tight, Rain Tight, & Ice/Sleet resistant - Indoors/Outdoors
Type 3 - intended for general purpose outdoor use primarily to provide a degree of protection against windblown dust, rain, and sleet; and to be undamaged by the formation of ice on the enclosure.
NEMA 3R Rain Proof & Ice/Sleet Proof - Indoors/Outdoors
PVDF / Steel
Type 3R - intended for general purpose outdoor use primarily to provide a degree of protection against falling rain; and to be undamaged by the
formation of ice on the enclosure.
NEMA 3S Dust Tight, Rain Tight, & Ice/Sleet Proof - Outdoors
Type 3S - intended for general purpose outdoor use primarily to provide a degree of protection against sleet; and to be undamaged by the formation
of ice on the enclosure.
NEMA 4 Water Tight & Dust Tight - Indoors/Outdoors
Type 4 - intended for general purpose indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing
water, and hose directed water; and to be undamaged by the formation of ice on the enclosure.
NEMA 4x Water Tight, Dust Tight, & Corrosion Resistant - Indoors/Outdoors
Accessories
Type 4X - intended for general purpose indoor and outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain,
splashing water, and hose-directed water; and to be undamaged by the formation of ice on the enclosure.
NEMA 5 Superseded by NEMA 12 for Control Apparatus
Type 5 - see NEMA 12
NEMA 6 Submersible, Water Tight, Dust Tight, & Ice/Sleet Resistant - Indoors/Outdoors
Adapter,Reducer,Enlarger
Type 6 - intended for general purpose indoor or outdoor use primarily to provide a degree of protection against the entry of water during temporary
submersion at a limited depth; and to be undamaged by the formation of ice on the enclosure.
NEMA 6P Submersible, Water Tight, Dust Tight, & Ice/Sleet Resistant - Indoors/Outdoors
Type 6P - Same as NEMA 6 including protection against the entry of water during prolonged submersion at a limited depth.
NEMA 7 Underwriters Lab Class 1-Groups C&D -Explosion Proof - Indoors
Conduit System
NEMA 8 Underwriters Lab Class 1-Groups C&D -Explosion Proof - Indoors
Technical Information
Type 7 - for indoor use in locations classified as Class I, Groups A, B, C, or D, as defined in the National Electrical Code.
Type 7 enclosures shall be capable of withstanding the pressures resulting from an internal explosion of specified gases, and contain such an explosion sufficiently that an explosive gas-air mixture existing in the atmosphere surrounding the enclosure will not be ignited. Enclosed heat generating
devices shall not cause external surfaces to reach temperatures capable of igniting explosive gas-air mixtures in the surrounding atmosphere. Enclosures shall meet explosion, hydro-static, and temperature design tests.
NEMA 10 Bureau of Mines
Type 8 is same as NEMA 7, except the unit is oil-immersed
NEMA 9 Underwriters’ Lab Class II - Groups E, F, G - Indoors
Type 9 - intended for special purpose indoor use in locations classified as hazardous (Class II, Groups E, F, or G, as defined in the National Electrical
Code).
Type 9 enclosures shall be capable of preventing the entrance of dust. Enclosed heat generating devices shall not cause external surfaces to reach
temperatures capable of igniting or discoloring dust on the enclosure or igniting dust-air mixtures in the surrounding atmosphere. Enclosures shall
meet dust penetration and temperature design tests, and aging of gaskets (if used).
NEMA 11 Corrosion Resistant & Drip Proof - Oil Immersed - Indoors
NEMA 12 Industrial Use - Dust Tight & Drip Tight - Indoors
Type 12 - intended for industrial indoor use primarily to provide a degree of protection against dust, falling dirt, and dripping noncorrosive liquids.
NEMA 13 Oil Tight & Dust Tight - Indoors
Other Products / Index
Type 13 - intended for industrial indoor use primarily to provide a degree of protection against dust, spraying of water, oil, and noncorrosive coolant.
NEMA Rating
NEMA 1
NEMA 2
NEMA 3
NEMA 3R
NEMA 3S
NEMA 4
NEMA 4x
NEMA 6
NEMA 6P
NEMA 12, 12K
NEMA 13
IP 23
IP 30
IP 64
IP 32
IP 64
IP 66
IP 66
IP 66-68
IP 67-68
IP 65
IP 65
-
-
-
-
-
-
-
Outdoor
-
-
-
-
-
-
-
-
Indoor & Outdoor
-
-
-
-
IP Class
Indoor
46
-
-
For Material Specifications and Approval Information, please refer to page 45.
-
Call for Technical Assistance: 800-456-9012 / 303-699-1135
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
IP Ratings
The IP Code defined in international standard IEC 60529 classifies the degrees of protection provided against the intrusion of:
Solid objects (including body parts like hands and fingers)
Dust
Accidental contact
Water in electrical enclosures
Nickel Plated Brass
•
•
•
•
It consists of the letters IP (for “International Protection Rating” or “Ingress Protection Rating”) followed by two digits and an optional
letter. The standard aims to provide users more detailed information than vague marketing terms such as “waterproof”.
Level Object size protected against
Effective against
No protection against contact and ingress of objects
1
>50 mm
Any large surface of the body, such as the back of a hand, but no protection against deliberate
contact with a body part
2
>12.5 mm
Fingers or similar objects
3
>2.5 mm
Tools, thick wires, etc.
4
>1 mm
Most wires, screws, etc.
5
dust protected
Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with
the satisfactory operation of the equipment; complete protection against contact
6
dust tight
No ingress of dust; complete protection against contact
Accessories
-
PVDF / Steel
0
Level Protected against
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
Brass
Liquid
Liquid
Tight
TightStrain
StrainRelief
ReliefFittings
Fittings
Technical
Information
IP Ratings: Description
Details
-
1
dripping water
Dripping water (vertically falling drops) shall have no harmful effect.
2
dripping water when tilted up to 15°
Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to
15° from its normal position.
3
spraying water
Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.
4
splashing water
Water splashing against the enclosure from any direction shall have no harmful effect.
5
water jets
Water projected by a nozzle against enclosure from any direction shall have no harmful effects.
6
powerful water jets
Water projected in powerful jets against the enclosure from any direction shall have no harmful
effects.
7
immersion up to 1 m
Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water
under defined conditions of pressure and time (up to 1 m of submersion).
8
immersion beyond 1 m
The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer.
NOTE: Normally, this will mean that the equipment is hermetically sealed. However, with certain
types of equipment, it can mean that water can enter but only in such a manner that produces no
harmful effects.
Conduit System
not protected
Adapter,Reducer,Enlarger
0
IP 69K
Technical Information
German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP 69K rating for high-pressure,
high-temperature wash-down applications.
Such enclosures must not only be dust tight (IP 6X), but also able to withstand high-pressure and steam cleaning.
The test specifies a spray nozzle that is fed with 80 °C (176 °F) water at 8–10 MPa (80–100 bar) and a flow rate of 14–16 L/min.
The nozzle is held 10–15 cm (3.94” - 5.91”) from the tested device at angles of 0°, 30°, 60° and 90° for 30 seconds each.
The test device sits on a turntable that rotates once every 12 s (5 rpm).
The IP 69K test specification was initially developed for road vehicles, especially those that need regular intensive cleaning (dump
trucks, cement mixers, etc), but also finds use in other areas (e.g., food industry, railroad, marine, etc.)
Other Products / Index
The most commonly used protection methods are IP and NEMA, whereas:
• IP Classification – addresses the European market
• NEMA Classification – addresses the North American market
For questions please call our Inside Technical Sales Department - 1-800-456-9012 or 303-699-1135.
For Material Specifications and Approval Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
47
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
Brass
Liquid
LiquidTight
TightStrain
StrainRelief
ReliefFittings
Fittings
Technical
Information
Specifications: Torque & Thread Diameter
w w w. s e a l c o nu s a . c o m
Sizes & Dimensions for SEALCON Liquid Tight Strain Relief Fittings
Major Thread Minor Thread
Diameter
Diameter
M6 x 1.0
6.0 mm / .24”
5.0 mm / .19”
M8 x 1.25 8.0 mm / .31”
6.8 mm / .26”
M10 x 1.5 10.0 mm / .40” 8.4 mm / .33”
M12 1.5 12.0 mm / .47” 8.0 mm / .32”
Accessories
PVDF / Steel
Nickel Plated Brass
Metric
M16 x 1.5
16.0 mm / .63”
14.5 mm / .57”
M20 x 1.5
20.0 mm / .79”
18.5 mm / .72”
M25 x 1.5
25.0 mm / .98”
M32 x 1.5
32.0 mm / 1.26” 30.5 mm / 1.20”
PG
Major Thread Minor Thread
Diameter
Diameter
PG 7
PG 9
12.5 mm / .49”
15.2 mm / .60”
11.3 mm / .44”
13.9 mm / .54”
PG 11
18.6 mm / .73”
17.3 mm / .68”
PG 13
PG 16
20.4 mm / .80”
22.5 mm / .89”
19.1 mm / .75”
21.2 mm / .83”
NPT
Major Thread Minor Thread
Diameter
Diameter
1/4”
3/8”
12.5 mm / .49”
16.8 mm / .66”
1/2”
1/2”-E
20.8 mm / .82”
20.8 mm / .82”
PG 21 28.3 mm / 1.11” 26.8 mm / 1.05”
3/4”
26.2 mm / 1.03”
PG 29 37.0 mm / 1.46” 35.5 mm / 1.39”
1”
1-1/4”
32.8 mm / 1.29”
41.4 mm / 1.63”
PG 36 47.0 mm / 1.85” 45.5 mm / 1.79”
1-1/2”
47.8 mm / 1.88”
23.5 mm / .92”
M40 x 1.5
40.0 mm / 1.57” 38.5 mm / 1.51”
M50 x 1.5
50.0 mm / 1.97” 48.5 mm / 1.90”
PG 42 54.0 mm / 2.13” 52.5 mm / 2.13”
PG 48 59.3 mm / 2.33” 57.8 mm / 2.72”
M63 x 1.5
63.0 mm / 2.48” 61.5 mm / 2.42”
Dome
Opening
3.0 mm / .11”
5.0 mm / .19”
6.0 mm / .24”
6.5 mm / .26”
11.6 mm / .46” 6.5 mm / .26”
15.2 mm / .60” 8.0 mm / .31”
8.0 mm / .31”
10.0 mm / .39”
12.0 mm / .47”
18.8 mm / .74” 12.0 mm / .47”
18.8 mm / .74” 14.0 mm / .55”
18.0 mm / .71”
24.1 mm / .95” 18.0 mm / .71”
25.0 mm / 0.98”
30.5 mm / 1.20” 25.0 mm / 0.98”
38.1 mm / 1.50” 25.0 mm / 0.98”
32.0 mm / 1.26”
45.7 mm / 1.80” 32.0 mm / 1.26”
38.0 mm / 1.50”
38.0 mm / 1.50”
44.0 mm / 1.73”
44.0 mm / 1.73”
Adapter,Reducer,Enlarger
Determine Sizes & Type of Fitting:
1.
2.
3.
4.
5.
6.
Check markings on the hex portion (wrenching flats). PG, NPT or Metric size should be embedded.
This only applies to Nylon parts.
Measure major thread diameter and compare with chart above. This may tell you whether it is a
PG, NPT or Metric thread (Nylon or Brass)
Confirm grommet type inside fitting. (See table on right for grommet identification)
The shorter length fittings are CD’s (connector dome), the longer type are CF’s (connector flex).
We offer Enlarged as well as Reduced solutions. A PG13.5/16 has a PG13 thread with a PG16 body.
Reduced would be the opposite (only in Nylon)
The shading (grouping) indicates same size bodies, but different threads.
Grommet Identification
Color
Type of Grommet
Black
Gray
Beige
Green
Brown
Standard
Reduced
Multi-Hole / Solid Plug
FPM
Silicone
Note:
Conduit System
Dome Opening = the largest possible dimension for one or more cables.
The chart can also be useful when working with knockouts (drilling holes)
Recommended Torque Specifications for Strain Relief Fittings
Torque in in-lb - Inch-Pound (Nm - Newton Meters)
Plastic Fittings
Dome Nuts
Thread & Lock Nuts
Sizes
Technical Information
M6
M8
PG7, M12x1.5
PG9, PG11, PG13, 3/8”NPT, 1/2”NPT, M16x1.5, M20x1.5
PG16, 1/2”NPT-E
PG21, PG29, PG36, PG42, PG48, 3/4”NPT, 1”NPT,
1-1/4”NPT, 1-1/2”NPT, M25, M32, M40, M50, M63
Other Products / Index
Note: 14.4 (1.62)
22.1 (2.5)
29.5 (3.33)
22.1 (2.5)
33.2 (3.75)
44.2 (5)
44.2 (5)
66.4 (7.5)
Metal Fittings
Dome Nuts
Thread & Lock Nuts
17.7 (2)
17.7 - 26.6 (2-3)
36.9 (4.17)
55.3 (6.25)
36.9 (4.17)
55.3 (6.25)
44.2 (5)
66.4 (7.5)
59 (6.67)
88.5 (10)
Torque for dome nuts was determined using a metal rod. It may vary for cable, depending on the crush resistance of the cable.
We recommend to determine the actual torque empirically, testing the actual cable used. The values shown above are for reference only.
Torque Specification is based on Norm: EN 50262
Pull-Test Rating for Strain Relief Fittings
The Pull-Test Rating of our Strain Relief Fittings complies with Industry Standards.
Pull-Test Rating: 35 lb.*
*Pull-Test Rating varies by Multi-Hole.
48
please callplease
our Inside
For Material SpecificationsFor
andquestions
Approval Information,
refer toTechnical
page 45. Sales Department - 1-800-456-9012 or 303-699-1135.
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
Thread Specifications
NPT Threads
1/4” NPT
3/8” NPT
1/2” NPT
3/4” NPT
1-1/4” NPT
1-1/2” NPT
2” NPT
.54 (13.72)
.675 (17.145)
.84 (21.336)
1.05 (26.67)
1.314 (33.40) 1.66 (42.164)
1” NPT
1.90 (48.26)
2.375 (60.325)
Pitch in Inches (mm)
Threads per Inch
.056 (1.41)
.056 (1.411)
.071 (1.814)
.071 (1.814)
.087 (2.208)
.087 (2.208)
.087 (2.208)
.087 (2.208)
18
18
14
14
11.5
11.5
11.5
11.5
Nickel Plated Brass
Thread Size
Major Dia. in Inches (mm)
Pitch
60º
• NPT Thread = National Pipe Thread
• Taper rate for all NPT threads is 1/16
• The taper on NPT threads allows them to form a seal when torqued as the
flanks of the threads compress against each other, as opposed to straight
thread fittings
conicity: 6.25%
PVDF / Steel
90º
Metric Threads
Thread Size
Major Dia. in Inches (mm)
60º
M6
M8
M10
M12
M16
M20
M25
M32
M40
M50
M63
.24 (6)
.31 (8)
.39 (10)
.47 (12)
.63 (16)
.79 (20)
.98 (25)
1.26 (32)
1.57 (40)
1.97 (50)
2.48 (63)
.04 (1)
.05 (1.25)
.06 (1.5)
.059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5) .059 (1.5)
.059 (1.5)
.059 (1.5)
1.97 (50)
2.48 (63)
.251 (6.4) .33 (8.4) .413 (10.5) .492 (12.5) .63 (16)
Pitch
.79 (20)
.98 (25)
1.26 (32)
1.57 (40)
Accessories
Pitch in Inches (mm)
Thru Hole in Inches (mm)
• World-wide most commonly used type thread
• Characterized by its major diameter and its pitch
• Designated by the letter M followed by the value of the nominal diameter and
the pitch, both expressed in millimeters and separated by the multiplication
sign ‘×’ (i.e. M12 x 1.5)
Adapter,Reducer,Enlarger
PG Threads
Thread Size
PG 7
PG 9
PG 11
PG 13 / 13.5
Major Dia. in Inches (mm)
.49 (12.5)
.60 (15.2)
.73 (18.6)
.80 (20.4)
.89 (22.5) 1.11 (28.3)
Pitch in Inches (mm)
Thru Hole in Inches (mm)
.056 (1.41)
.056 (1.41) .062 (1.59) .062 (1.59) .062 (1.59) .062 (1.59) .062 (1.59)
.50 (12.7) .606 (15.4) .74 (18.8)
80º
.05 (1.27) .056 (1.41) .056 (1.41)
PG 16
PG 21
PG 29
PG 36
1.46 (37)
1.85 (47)
PG 42
PG 48
2.13 (54) 2.39 (59.3)
.8149 (20.7) .897 (22.8) 1.12 (28.6) 1.47 (37.4) 1.87 (47.5) 2.14 (54.5) 2.35 (59.8)
• PG Thread = Panzer-Gewinde (also Panzer-Rohr-Gewinde)
• German thread type
• Depth of thread smaller than NPT or Metric, but larger flank
angle
• Straight thread
Conduit System
Pitch
Nylon Strain Relief
Nickel
NickelPlated
PlatedBrass
Brass
Liquid
Liquid
Tight
TightStrain
StrainRelief
ReliefFittings
Fittings
Technical
Information
Thread Specifications & Pitch: NPT, Metric & PG
BSPP (G) Threads
Major Dia. in Inches (mm)
Pitch in Inches (mm)
Threads per Inch
55º
Pitch
G 2-1/2”
G 3”
G 4”
2.96 (75.184)
3.46 (87.884)
4.45 (113.03)
.09 (2.309)
.09 (2.309)
.09 (2.309)
2.98 (75,7)
3.34 (84.926)
4.33 (110.072)
Technical Information
Thread Size
For questions please call our Inside Technical Sales Department
- 1-800-456-9012
or 303-699-1135.
For Material Specifications
and Approval
Information, please refer to page 45.
Dimensions and specifications may be changed without prior notice.
Other Products / Index
• BSPP Thread = British Standard Pipe Parallel Thread
• Parallel (straight) thread with a constant diameter, denoted by the letter G
• Symmetrical V-thread in which the angle between the flanks is 55°
(measured in an axial plane)
• One-sixth of this sharp V is truncated at the top and the bottom
• Threads are rounded equally at crests and roots by circular arcs ending
tangentially with the flanks
• The theoretical depth of the thread is therefore 0.64 times the nominal pitch
49
Nylon Strain Relief
Other Products
Circular Connectors (M16, M23, M27, M40)
w w w. s e a l c o nu s a . c o m
M23
RJ45
Industrial
Ethernet
Nickel Plated Brass
M27 Signal
M40
M23 Power
PVDF / Steel
M23 Stainless Steel
M23 OverMolded
Cord-sets
M23 Signal
TWILOCK
Power, Signal
(M16, M23, RJ45,
Twintus, Nickel Plated
Brass, Stainless Steel)
Accessories
M16
NEW
M12 / M16 TWINTUS
Why use Sealcon / Hummel Circular Connectors?
Conduit System
Adapter,Reducer,Enlarger
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Easy MRO Field Assembly
No Special Tools Required to Insert or Extract Contacts
Modular for a Variety of Configurations
All Connectors are EMI Ready
Threaded and Push-Pull (Quick Disconnect) Interchangeable
Compatible with other Hummel Connectors Standards
Reliable Connection – Contacts with Low Plug-In Force & High Mating Cycles
Pre-Tinned Contacts – Reliable, Faster and Safer Means of Soldering
Vibration Safe Contacts (SLS)
Inserts for all Types of Contacts – Crimp, Solder & Dip Solder
Reduced Number of Parts
Time-Saving Cable Assembly
Highest Ratings
Large Assortment of Domestic Inventory
Excellent Customer Service
7
IP 6
Industries Served
•
•
•
•
•
•
Technical Information
Other Products / Index
M23 PoE
(Power over
Ethernet)
ProfiNet
Robotics
Motors
Automation
Packaging
Hazardous
Telecom
•
•
•
•
•
•
Automotive
Wind
Solar
Diagnostic
Sensing
Military
•
•
•
•
•
•
Food & Beverage
Transportation
Lighting
Pharmaceutical
Marine
Traffic
ISO 9001:2000
No Minimum
Orders!
2D / 3D CAD
Available!
Ex-i M23 Circular Connectors
(RJ45 Ethernet) Nickel Plated Brass
lable
Avai
Ideal in Low Voltage
Applications!
Request Your Catalog Today:
800-456-9012 / 303-699-1135 /info@sealconusa.com
ATEX
Coming
Soon!
Ex-e M23 Circular Connectors (Power & Signal)
Explosion Proof -Nickel Plated Brass
50
Dimensions and specifications may be changed without prior notice.
• SCADA
• RTU’s
• Data Collection
w w.
o n sexa . c o m
w w w.
s esaelacloc nu
Our Service Makes
the Difference!
Nylon Strain Relief
Other Products
Cable Glands for Hazardous Locations
Nickel Plated Brass
Cable Glands, Strain Relief Fittings & Connectors
for Hazardous/Increased Safety Locations
PVDF / Steel
Armored Solutions
Adapter,Reducer,Enlarger
We Connect the World with Quality Products!
GL
US
ATEX
Conduit System
UL746C
f1
C
Gost
Non-Armored Solutions
Ex
E x - d A p p r ove d
Technical Information
Hi/Low Temperature &
Chemical Resistant
(Nickel Plated Brass / 316L Stainless Steel )
E x - i A p p r ove d
(Nickel Plated Brass / 316L Stainless Steel)
E x - e A p p r ove d
Other Products / Index
Intrinsically Safe (IS)
Signal / Power / Standard / Multi-Hole / IS / Clamping
(Nylon / Nickel Plated Brass / 303 Stainless Steel)
51
Dimensions and specifications may be changed without prior notice.
Accessories
Ex-d/-e
A ppr oved
Nylon Strain Relief
Other Products
Cable Glands for Hazardous Locations
Nickel Plated Brass
w www.
s esaelaclocnu
a.com
w w.
o nsex
PVDF / Steel
•Oil & Gas Production
•Refineries
•Oilfield Service Companies
•The Petroleum Industry
•Energy/Coal
•Process Industry
•Paint Manufacturing
• According to the latest EN Standards
EN 60079-0: 2012
EN 60079-7: 2007
EN 60079-31: 2008
Accessories
Adapter,Reducer,Enlarger
•Recycling
•Motion Control
•Construction
•Textile
•Marine
•International Companies
•Industrial Manufacturing Sector
Ex Aluminum Enclosures
• Zones 1, 2, 21, 22
Grounding
Screws
• Silicone Seal
•
•
•
•
•
II 2 GD
Ex e IIC Gb
Ex tb IIIC Db
Sira 12ATEX3213U
-76°F to 212°F (-60°C to 100°C)
These Enclosures have been tested by an internationally recognized and certified laboratory.
They have been certified for applications in areas with potentially explosive dust and gas
atmospheres. Aluminum die-cast enclosures can be used as terminal and control enclosures.
Furthermore, they are constructed to accept corresponding mechanical and electrical equipment.
Check Online at www.sealconex.com for the latest
product updates & information!
Technical Information
Conduit System
•Chemical Industries
•Pharmaceutical
•Waste
•Wood Processing
•Agriculture
•Metal
•Food Processing
• Let us Cross: Hawke, Peppers, CMP, Cooper Crouse Hinds, Capri, Emerson’s Appleton
& OZ Gedney
Other Products / Index
• Exios: Cable Glands for armored cables in
hazardous areas meeting IECEx and ATEX
standards as well as Class & Div, for use in
Ex-d, Ex-e and Ex-tD areas
52
Dimensions and specifications may be changed without prior notice.
w w w. s e a l c o nu s a . c o m
Materials:
• PC (Polycarbonate)
• Polyester
• Powder-coated Steel
• Stainless Steel • Polystyrene
• ABS (Acryl-Butadiene-Styrene)
• Aluminum
• Square / rectangle shape
• Solid and transparent lids (PC & ABS) •
• Extension Frames (Large PC/ABS) • Knockout & Membrane Flanges
• Hinges & Latches (PC)
• EMI Shielding (PC EMI) upon request •
Nickel Plated Brass
Features:
Nylon Strain Relief
Other Products
Industrial Enclosure Solutions
Smooth walls or PG/Metric knockouts
(Large PC/ABS) (Medium PC/ABS)
Accessories: Mounting Plates, DIN
Rails, Lugs, Clips, Screws, Key, etc.
We will be happy to help you choose the correct enclosure for your
application. We also provide customization by replacing standard parts
with special options.
PVDF / Steel
Hinged / Latched
Drilling and Cutting
We perform customized machining such as cutting,
drilling, threading and countersinking according to
drawings.
Assembly
Accessories
The enclosures can be equipped with:
• Cable glands
• Flanges
• Circular connectors
• DIN Rails
• Mounting Plates
• Hinges, etc.
Print
Adapter,Reducer,Enlarger
Company logos, operating instructions and picture
symbols can easily be silk screen printed on the
enclosures.
The enclosures feature a clean and functional style.
Stainless Steel & Powder-Coated Steel
Color Service
In addition to the standard gray color, we also offer
other color options. For large series, dyed raw material
is the most cost-effective color option. Small series can
be painted according to the RAL color scale.
We offer total solutions!
• Flexible
• Economical
Conduit System
akes
rvice mce!
e
s
r
u
O
eren
the diff
• Creative
We offer one stop shopping.
Accessories: Extension Frames, Mounting
Plates, DIN Rails, Flanges, Screws, etc
For custom solutions please provide drawing.
The factory will quote based on those specs.
Allow adequate time for first delivery.
Polycarbonate /
Polystyrene
Functional Integrity
Solar
No Minimum Orders!
Request Your Catalog Today:
800-456-9012 / 303-699-1135
info@sealconusa.com
Large Variety of Sizes!
Dimensions and specifications may be changed without prior notice.
53
Other Products / Index
Offshore
Applications
PLUS
Technical Information
Gray or Transparent Covers
Nylon Strain Relief
Index / Cross Reference
www.sealconusa.com
Other Products / Index
Technical Information
Conduit System
Adapter,Reducer,Enlarger
Accessories
PVDF / Steel
Nickel Plated Brass
w w w. s e a l c o nu s a . c o m
54
Sealcon
Part Numbers
Hummel
Part Numbers
Hummel
Description
Sealcon
Page Nr.
Sealcon
Part Numbers
Hummel
Part Numbers
Hummel
Description
Sealcon
Page Nr.
AF-xxxx-BK
AF-xxxx-BR
AG-xxxx-BK
AG-xxxx-BR /-AL
AM-xxxx-BK
AM-xxxx-BR
AN-xxxx-BR
AP-xxxx-BK
AP-xxxx-BR
AT-xxxx-BR
CDxxAA-BE
CDxxAA-BK /-GY
CDxx-AA-BR
CDxxAA-CP
CDxxAA-FE
CDxxAA-MZ
CDxxAA-RV
CDxxAA-SS
CDxxAA-SV
CDxxAA-TE
CDxxAP-BK /-GY
CDxxAP-BR
CDxxAR-BE
CDxxAR-BK /-GY
CDxx-AR-BR
CDxxAR-RV
CDxxAR-SS
CDxxAR-SV
CDxxAR-TE
CDxxAS-A1
CDxxAS-01 /-04
CDxxAW-BR
CDxxAx-BK /-GY
CDxxAx-BR
CDxxBA-BK /-GY
CDxxBR-BK /-GY
CDxxCA-BE
CDxxCA-BK /-GY
CDxx-CA-BR
CDxxCA-MZ
CDxxCA-RV
CDxxCR-BE
CDxxCR-BK /-GY
CDxx-CR-BR
CDxxCR-RV
CDxxDA-BE
CDxxDA-BK /-GY
CDxx-DA-BR
CDxxDA-FE
CDxxDA-MZ
CDxxDA-RV
CDxxDR-BE
CDxxDR-BK /-GY
CDxx-DR-BR
CDxxDR-FE
CDxxDR-MZ
CDxxDR-RV
CDxxGA-BK /-GY
CDxxGR-BK /-GY
CDxx-LA-BK /-GY
CDxxLP-BK /-GY
CDxx-LR-BK /-GY
CDxxMA-BE
CDxxMA-BK /-GY
CDxx-MA-BR
CDxxMA-CP
1.239 / 1.273
1.039
1.171
1.171
1.239 / 1.273
1.039
1.691
1.209
1.609
1.215
1.631
1.690
1.699
1.695
1.696
1.299
1.597
1.697
1.691
1.209
1.609
1.699
1.695
1.696
1.299
1.587
1.587
1.112
1.597
1.697
1.591
1.591
1.691
1.209
1.609
1.690
1.699
1.691
1.209
1.609
1.699
1.691
1.209
1.609
1.631
1.690
1.699
1.691
1.209
1.609
1.631
1.690
1.699
1.590
1.590
1.209
1.597
1.209
1.691
1.209
1.609
1.215
E-M-PA / R-M-PA
RE-Ms
RE-Ms
RE-Ms
E-M-PA / R-M-PA
RE-Ms
HSK-M-EMV
HSK-K
HSK-M
HSK-K-MZ-Ex
HSK-M-EMV-D
HSK-MZ
HSK-M-PVDF
HSK-INOX
HSK-INOX-PVDF
HSK-K-PVDF
HSK-K-Multi
HSK-M-Multi
HSK-M-EMV
HSK-K
HSK-M
HSK-M-PVDF
HSK-INOX
HSK-INOX-PVDF
HSK-K-PVDF
HSK-K-FLAKA
HSK-K-FLAKA
HSK-MINI
HSK-K-Multi
HSK-M-Multi
HSK-KR
HSK-KR
HSK-M-EMV
HSK-K
HSK-M
HSK-MZ
HSK-M-PVDF
HSK-M-EMV
HSK-K
HSK-M
HSK-M-PVDF
HSK-M-EMV
HSK-K
HSK-M
HSK-M-EMV-D
HSK-MZ
HSK-M-PVDF
HSK-M-EMV
HSK-K
HSK-M
HSK-M-EMV-D
HSK-MZ
HSK-M-PVDF
HSK-KE
HSK-KE
HSK-K
HSK-K-Multi
HSK-K
HSK-M-EMV
HSK-K
HSK-M
HSK-K-MZ-Ex
35
34
35
34
35
34
34
35
34
34
20
4
14
9
21
17
26
27
27
25
10
22
20
4
14
26
27
27
25
9
9
15
10
22
7
7
20
6
16
17
26
20
6
16
26
20
6
16
21
17
26
20
6
16
21
17
26
7
7
4
11
4
20
5
14
9
CDxxMA-FE
CDxxMA-MZ
CDxxMA-RV
CDxxMA-SS
CDxxMA-SV
CDxxMA-TE
CDxxMP-BK /-GY
CDxxMP-BR
CDxxMR-BE
CDxxMR-BK /-GY
CDxx-MR-BR
CDxxMR-MZ
CDxxMR-RV
CDxxMR-SS
CDxxMR-SV
CDxxMR-TE
CDxxMS-A1
CDxxMS-01 /-04
CDxxMW-BR /-RV
CDxxMx-BK /-GY
CDxxMx-BR
CDxxNA-BE
CDxxNA-BK /-GY
CDxx-NA-BR
CDxxNA-FE
CDxxNA-MZ
CDxxNA-RV
CDxxNA-6S
CDxxNA-6V
CDxxNA-TE
CDxxNP-BK /-GY
CDxxNP-BR
CDxxNR-BE
CDxxNR-BK /-GY
CDxx-NR-BR
CDxxNR-RV
CDxxNR-SS
CDxxNR-SV
CDxxNR-TE
CDxxNS-A1
CDxxNS-01 /-04
CDxxNx-BK /-GY
CDxxNx-BR
CFxxAA-BE
CFxxAA-BK /-GY
CFxx-AA-BR
CFxxAA-TE
CFxxAP-BR
CFxxAR-BE
CFxxAR-BK /-GY
CFxx-AR-BR
CFxxAR-TE
CFxxAx-BR
CFxxBA-BK /-GY
CFxxBR-BK /-GY
CFxxCA-BE
CFxxCA-BK /-GY
CFxx-CA-BR
CFxxCR-BE
CFxxCR-BK /-GY
CFxx-CR-BR
CFxxDA-BE
CFxxDA-BK /-GY
CFxx-DA-BR
CFxxDR-BE
CFxxDR-BK /-GY
1.631
1.690
1.699
1.695
1.696
1.299
1.597
1.697
1.691
1.209
1.609
1.690
1.699
1.695
1.696
1.299
1.587
1.587
1.106
1.597
1.697
1.691
1.209
1.609
1.631
1.690
1.699
1.695
1.696
1.299
1.597
1.697
1.691
1.209
1.609
1.699
1.695
1.696
1.299
1.587
1.587
1.597
1.697
1.624
1.293 / 1.294
1.623
1.624
1.293 / 1.294
1.623
1.594
1.594
1.624
1.293 / 1.294
1.623
1.624
1.293 / 1.294
1.623
1.624
1.293 / 1.294
1.623
1.624
1.293 / 1.294
HSK-M-EMV-D
HSK-MZ
HSK-M-PVDF
HSK-INOX
HSK-INOX-PVDF
HSK-K-PVDF
HSK-K-Multi
HSK-M-Multi
HSK-M-EMV
HSK-K
HSK-M
HSK-MZ
HSK-M-PVDF
HSK-INOX
HSK-INOX-PVDF
HSK-K-PVDF
HSK-K-FLAKA
HSK-K-FLAKA
HSK-MINI
HSK-K-Multi
HSK-M-Multi
HSK-M-EMV
HSK-K
HSK-M
HSK-M-EMV-D
HSK-MZ
HSK-M-PVDF
HSK-INOX
HSK-INOX
HSK-K-PVDF
HSK-K-Multi
HSK-M-Multi
HSK-M-EMV
HSK-K
HSK-M
HSK-M-PVDF
HSK-INOX
HSK-INOX
HSK-K-PVDF
HSK-K-FLAKA
HSK-K-FLAKA
HSK-K-Multi
HSK-M-Multi
HSK-M-Flex-EMV
HSK-Flex
HSK-M-Flex
needs to be built
needs to be built
HSK-M-Flex-EMV
HSK-Flex
HSK-M-Flex
needs to be built
needs to be built
HSK-KR-Flex
HSK-KR-Flex
HSK-M-Flex-EMV
HSK-Flex
HSK-M-Flex
HSK-M-Flex-EMV
HSK-Flex
HSK-M-Flex
HSK-M-Flex-EMV
HSK-Flex
HSK-M-Flex
HSK-M-Flex-EMV
HSK-Flex
21
17
26
27
27
25
12
24
20
5
14
17
26
27
27
25
9
9
15
12
24
20
4
14
21
17
26
27
27
25
11
23
20
4
14
26
27
27
25
9
9
11
23
20
4
14
25
22
20
4
14
25
22
7
7
20
6
16
20
6
16
20
6
16
20
6
Dimensions and specifications may be changed without prior notice.
www.sealconusa.com
w w w. s e a l c o nu s a . c o m
Sealcon
Page Nr.
CFxx-DR-BR
CFxxGA-BK /-GY
CFxxGR-BK /-GY
CFxxMA-BE
CFxxMA-BK /-GY
CFxx-MA-BR
CFxxMA-TE
CFxxMP-BR
CFxxMR-BE
CFxxMR-BK /-GY
CFxx-MR-BR
CFxxMR-TE
CFxxMx-BR
CFxxNA-BK /-GY
CFxx-NA-BR
CFxxNA-TE
CFxxNP-BR
CFxxNR-BK /-GY
CFxx-NR-BR
CFxxNR-TE
CFxxNx-BR
CXxxGx-BR
CXxxMx-BR
DM-xx-BK /-GY
DM-xx-BR
DM-xx-BR-B
DP-xx-BK /-GY
DP-xx-BR
DP-xx-BR-B
DSxxAA-BK
DSxxMA-BK
DSxxNA-BK
DUOxxAA-BK
DUOxxAA-BR
DUOxxAR-BK
DUOxxAR-BR
DUOxxMA-BK
DUOxxMA-BR
DUOxxMR-BK
DUOxxMR-BR
EDxxAA-BK /-GY
EDxxAA-BR
EDxxAR-BK /-GY
EDxxAR-BR
EDxxFA-BR
EDxxFR-BR
EDxxMA-BK /-GY
EDxxMA-BR
EDxxMR-BK /-GY
EDxxMR-BR
EDxxNA-BK /-GY
EDxxNR-BK /-GY
EFxxAA-BK /-GY
EFxxAR-BK /-GY
EFxxMA-BK /-GY
EFxxMR-BK /-GY
EFxxNA-BK /-GY
EFxxNR-BK /-GY
EMxxAA-BK
EMxxMA-BK
EMxxNA-BK
EM-xxxx-BK
EM-xxxx-BR
EN-xxxx-BR
EP-xxxx-BR
ETxxAA-BK
1.623
1.593
1.593
1.624
1.293 / 1.294
1.623
1.624
1.293 / 1.294
1.623
1.293 / 1.294
1.623
1.293 / 1.294
1.623
1.106
1.106
1.251
1.052
1.052
1.251
1.052
1.052
1.224
1.224
1.224
1.543
1.548
1.543
1.548
1.542
1.547
1.542
1.547
1.313
1.309
1.313
1.309
1.309
1.309
1.313
1.309
1.313
1.309
1.313
1.313
1.314
1.314
1.314
1.314
1.314
1.314
1.513
1.513
1.513
1.239
1.033
1.033
1.223
HSK-M-Flex
HSK-KE-Flex
HSK-KE-Flex
HSK-M-Flex-EMV
HSK-Flex
HSK-M-Flex
needs to be built
needs to be built
HSK-M-Flex-EMV
HSK-Flex
HSK-M-Flex
needs to be built
needs to be built
HSK-Flex
HSK-M-Flex
needs to be built
needs to be built
HSK-Flex
HSK-M-Flex
needs to be built
needs to be built
HSK-XL
HSK-XL
V-N-FS
V-N-Ms
V-N-Ms-SD
V-N-FS
V-N-Ms
V-N-Ms-SD
HSK-EH
HSK-EH
HSK-EH
Snapclic-DUO-PA
Snapclic-DUO-Ms
Snapclic-DUO-PA
Snapclic-DUO-Ms
Snapclic-DUO-PA
Snapclic-DUO-Ms
Snapclic-DUO-PA
Snapclic-DUO-Ms
HSK-W
HSK-M-W
HSK-W
HSK-M-W
HSK-M-W
HSK-M-W
HSK-W
HSK-M-W
HSK-W
HSK-M-W
HSK-W
HSK-W
HSK-W-Flex
HSK-W-Flex
HSK-W-Flex
HSK-W-Flex
HSK-W-Flex
HSK-W-Flex
SM-W
SM-W
SM-W
E-M-PA
E-Ms
E-Ms
EH-W
16
7
7
20
5
14
25
24
20
5
14
25
24
4
14
25
23
4
14
25
23
15
15
31
31
31
31
31
31
44
44
44
43
43
43
43
43
43
43
43
8
17
8
17
17
17
8
17
8
17
8
8
8
8
8
8
8
8
41
41
41
39
39
39
39
42
ETxxNA-BK
FL-xx-BK
FT-xx-BK
HM-xx-BK
HM-xx-BR
HM-xx-BR-B
HM-xx-BR-V
HM-xx-SS-B
HM-xx-SS-S
HM-xx-SS-V
HN-xx-BK
HP-xx-BK
HP-xx-BR
HP-xx-BR-B
HP-xx-BR-V
HP-xx-SS-B
HP-xx-SS-S
HP-xx-SS-V
KLxxAA-BR
KLxxMA-BR
MB-xx-BK
NG-xx-XL
NM-xx-BE
NM-xx-BK /-GY
NM-xx-BR
NM-xx-XL
NN-xx-BE
NN-xx-BK /-GY
NN-xx-BR
NN-xx-ST
NP-xx-BE
NP-xx-BK /-GY
NP-xx-BR
OM-xx-BN /-VT
OM-xx-SI
OR-xx-BN /-VT
OR-xx-SI
PL-xx-BK
RB-xxxx-02
RM-xxxx-BK
RM-xxxx-BR
RM-xxxx-SS
RM-xxxx-SS-B
RM-xxxx-SS-S
RM-xxxx-SS-V
RN-xxxx-BR
RP-xxxx-BR
RP-xxxx-SS
RQ-xxxx-BR
RQ-xxxx-SS
RQ-xxxx-SS-S
RQ-xxxx-SS-V
RR-xxxx-BR
RR-xxxx-GY
SMxxAA/MA-BK
SMxxNA-BK
SM-xx-NY /-HD
SM-xxxx-BK
SM-xxxx-HY
SR-xx-NY /-HD
STxxAA/NA-BK
S-xxx-WR
1.223
1.312
1.312
1.255
1.155
1.156
1.157
1.152
1.154
1.153
1.255
1.155
1.156
1.157
1.152
1.154
1.153
1.143
1.143
1.724
1.106
1.167
1.262
1.161
1.161
1.262
1.161
1.167
1.262
1.161
1.321
1.321
1.321
1.321
1.280
1.273
1.077
1.094
1.097
on request
on request
1.074
1.094
1.077
1.097
on request
on request
1.071 / 1.076
1.236 / 1.272
1.511
1.511
1.325
1.510
1.524
1.325
1.220
1.500
EH-W
KF-G
KF-G
V-NE
V-NE-Ms
V-NE-Ms-SD
V-NE-Ms-SD-FPM
V-INOX
V-INOX-VMQ
V-INOX-FPM
V-NE
V-NE-Ms
V-NE-Ms-SD
V-NE-Ms-SD-FPM
V-INOX-NBR
V-INOX-VMQ
V-INOX-FPM
KLE
KLE
UH
GM-Ms (XL)
GM-EMV
GM-FS
GM-Ms
GM-Ms (XL)
GM-FS
GM-Ms
GM-EMV
GM-FS
GM-Ms
O-Ring
O-Ring - Silicone
O-Ring
O-Ring - Silicone
HSK-V
R-M-PA
RSD-Ms
RS-INOX
RSD-INOX
RSD-INOX
RSD-INOX
RS-Ms
RS-INOX
RSD-Ms
RSD-INOX
RSD-INOX
RSD-INOX
R-H
R-FS
SM-N
SM-N
Thread Seal Rings
SM-WS-PA
EH-HY
Thread Seal Rings
EH
ST
42
44
44
31
32
32
32
32
32
32
31
31
32
32
32
32
32
32
33
33
40
15
29
28
28
15
29
28
28
29
29
28
28
30
30
30
30
30
37
37
36
38
38
38
38
36
36
38
36
38
38
38
36
37
41
41
30
40
40
30
42
33
Dimensions and specifications may be changed without prior notice.
Other Products / Index
Hummel
Description
Technical Information
Hummel
Part Numbers
Conduit System
Sealcon
Part Numbers
Adapter,Reducer,Enlarger
Sealcon
Page Nr.
Accessories
Hummel
Description
PVDF / Steel
Hummel
Part Numbers
Nickel Plated Brass
Sealcon
Part Numbers
Nylon Strain Relief
Index / Cross Reference
55
We Provide Customers with Cable Management Solutions!
316L Stainless Steel Hygienic Strain Relief / Cable Glands
No More Nooks & Crannies!
ble
la
Avai
• Smooth surface (no cavities, no sharp corners) preventing material from sticking!
• Suitable in wash down (IP68 or IP69K) applications - avoiding bacteria and micro-organism deposits!
• EHEDG listed (European Hygienic Engineering & Design Group)
• FDA Conforming Materials
• Chemical resistant 316L Stainless Steel to sustain disinfectant, cleaners, acids and
alkalis!
• Temp Rating - 40 °F to 248 °F (-40 °C to 120 °C)
APPLICATIONS:
• Used on Motors and Panels in Processing & Handling Equipment, Measurement/
Sensing, Scales, Peripherals, Conveyors, Cranes, etc,
Seal:
Silicon
Insert &
O-Ring
MARKETS:
• Beverage & Bottling Filling Plants, Meat Packaging & Meat Cutting, Seafood &
Poultry, Dairy, Bakery, Clean Room, Medical, Pharmaceutical, Pulp / Paper.
Check online for the latest product information!
www.sealconusa.com
Other catalogs & flyers available.
Call for details...
Further information on the products presented
here and everything else Sealcon has to offer
can be found on our website:
www.sealconusa.com
Our website is consistently updated. Sealcon
catalogs are also available for download online.
Committed to Excellence!
7374 S. Eagle Street Centennial, CO 80112 USA
Toll Free: 800-456-9012 / 303-699-1135
Fax: 303-680-5344
Email: info@sealconusa.com
Web: www.sealconusa.com
0116
Dimensions and specifications may be changed without prior notice.