CFL
Compact Floodlights
revision 11/13/14 • kl_cfl_spec.pdf
Type:
Job:
Fixture Options:
Fixture Catalog number:
/
/
Fixture
Electrical Module
Finish
Ordered Separately from Fixture
See pages 3
Mounting Options:
Specifications
Dimensions
Dimensions
CFL Models
Models
CFL
50 to
to 70
70 watt
watt H.I.D.
HID
50
Medium
Medium Base
Base Lamps
Lamps
13
13 to
to 42
42 watt
watt Compact
Compact Fluorescent
Fluorescent
60
60 watt
watt Incandescent
Incandescent
150
150 watt
watt Halogen
Halogen
27 LED
Maximum weight: 13 lb
Maximum weight: 13lb
5B"
10K"
(130.2 mm)
7D"
(266.7 mm)
6"
(152.4 mm)
9" Max. (228.6 mm)
59 64" at max. (130.6 mm)
back tilt
2N"
2J"
K" (12.7 mm)
NPSM
FRONT
(65.1 mm)
(57.2 mm)
SIDE
Date:
Page: 1 of 6
Ordered Separately from Fixture
See pages 4-6
See page 2
(193.7 mm)
Approvals:
0° Vertical
30°
145°
AIMING RANGE
10K"
(266.7 mm)
K" (12.7 mm)
NPSM
LED Assembly
Housing: One-piece die-cast, low copper (<0.6% Cu) aluminum
in a cylindrical shape with integral cooling fins over the entire
length, and .100” minimum wall thickness. One-piece silicone
gasket between housing and lens frame.
Lens Frame: One-piece die-cast, low copper (<0.6% Cu)
aluminum with integral cooling fins, .100” minimum wall
thickness, mates with housing to create a continuous cylindrical
shape. 5/32” thick clear tempered glass lens is sealed to the lens
frame by a one-piece stamped silicone gasket. Lens frame secures
to housing by two stainless steel recessed captive allen-head
screws.
Swivel: Die-cast aluminum with integral locking teeth providing
6° adjustment intervals and K” NPSM plus solid brass locknut for
mounting. Clear anodized prior to titanated zirconium conversion
coating for added corrosion resistance.
Fasteners: Stainless steel, recessed captive allen-head screws.
Reflector: Specular Alzak® aluminum optical components
mounted to aluminum frame.
Socket: 4KV porcelain medium base (T-10 Incandescent and
HID); T-4 Mini-can base (Halogen); 13w GX23-2 2-pin base,
42W GX24q-3 4-pin base (Fluorescent).
Ballast: All electrical components are UL and CSA recognized
with leads extending out of the swivel splice compartment.
Normal power factor ballast rated -32°F starting (13 watt Twin
Tube Fluorescent); High power factor ballast rated 0°F starting
(42 watt Triple Tube Fluorescent); Reactor - High power factor
with starting temperature of -20°F. for PMH lamp modes. For
PMH/120 volt, a step-up transformer is provided.
LED: Three 9 LED modules with a total of 27 LEDs configured in
a rectangular array comprised together as one module. Available
in 3000, 4200K, 5100K and 580 nm Amber. Emitters are directly
attached to the electronic driver.
LED Driver: Universal voltage, 120 through 277V
electronic driver. -40ºF. starting temperature. All drivers are
Underwriters Laboratories recognized.
Finish: TGIC thermoset polyester powder coat paint, 2.5 mil
nominal thickness, applied over a titanated zirconium conversion
coating; 2500 hour salt spray test endurance rating. Standard
colors are Black, Dark Bronze, Light Gray, Stealth Gray, Platinum
Silver, or White. Custom colors are available.
Caution: Fixtures must be grounded in accordance with
national, state, and/or local electrical codes. Failure to do so may
result in serious personal injury.
UL cUL 15981
1
Listings and Ratings
CE
IP66 Rated
Suitable for wet locations.
25C Ambient
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2014 KIM LIGHTING INC. • 16555 East Gale AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
CFL
Compact Floodlights
revision 11/13/14 • kl_cfl_spec.pdf
Type:
Job:
Page: 2 of 6
Standard Features
Fixture
Cat. No. designates CFL
fixture and beam pattern.
Single fixture EPA:
0.3 (45° tilt)
0.5 (Face on)
Beam Pattern:
Cat. No.:
Electrical Module
PMH=Pulse Start
Metal Halide
INC=Incandescent
HAL=Halogen
PL=Compact
Fluorescent
LED=Light Emitting Diodes
Narrow Spot
l CFL6
Cat. Nos. for Electrical Modules available:
Pulse Start Metal Halide
l 50PMH120
l 70PMH120
l 50PMH277
l 70PMH277
Lamp E-17, Clear
Socket Medium Base
ANSI BallastM-110
E-17, Clear
Medium Base
M-98
IncandescentHalogen
l 60INC120
l 150HAL120
LampLamp Line
Watts Type Volts
50 PMH277
Wide Flood
l CFL1
Lamp T-10, Coated
Socket Medium Base
T-4, Clear
Mini-can Base
Compact Fluorescent
l 13PL1201
l 42PL1201
l 13PL2771
l 42PL2081
l 42PL2401
l 42PL2771
Lamp Twin Tube, Coated Triple Tube, Coated
Socket Gx23-2 2-pin Base Gx24q-3 4-pin Base
LED
l 27L2KUV1,2,3 (32.4W)
l 27L3KUV1,2,3 (32.4W)
l 27L4KUV1,2,3 (32.4W)
l 27L5KUV1,2,3 (32.4W)
LED
N/A
For CFL1 only.
27L = 27 LEDs, 2K = 580 nm Amber, 3K = 3000 Kelvin, 4K = 4200 Kelvin, 5K = 5100 Kelvin,
UV = Universal voltage 120 through 277V electronic driver
3
For 32.4W, Max Amps. are .27 for 120V, .16 for 208V, .14 for 240V, .12 for 277V.
1
2
42PL operates 26, 32, and 42 watt lamps at 120 thru 277 volts (50-60 Hz).
Finish
TGIC powder coat paint
over a titanated zirconium
conversion coating.
Color: Black Dark Bronze
Cat. No.:l BL l DB
Light Gray Stealth Gray™ Platinum Silver White
l LG
l SG
l PS
l WH
Custom Color2
l CC
Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:
2
© 2014 KIM LIGHTING INC. • 16555 East Gale AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
CFL
Compact Floodlights
revision 11/13/14 • kl_cfl_spec.pdf
Type:
Job:
Page: 3 of 6
Fixture Options
Ordered Separately from Fixture
Barn Doors
Cat. No. (see right)
l No Option
Extruded aluminum, fully adjustable doors with
anti-reflection baffles. Individually swiveled and secured on
a stainless steel frame. Easily attaches to pre-drilled holes
in the lens frame with stainless steel screws. Provides beam
and glare control.
CAUTION: Not recommended for ground mounted fixtures
in vandal prone areas.
Cat. No.
l BD-CFL/BL
Black
l BD-CFL/DB
Dark Bronze
l BD-CFL/LG
Light Gray
l BD-CFL/SG
Stealth Gray™
l BD-CFL/PS
Platinum Silver
l BD-CFL/WH White
Fixed Hood
Cat. No. (see right)
l No Option
Formed .062 thick aluminum. Easily attaches to pre-drilled
holes in the lens frame with stainless steel screws. Provides
moderate shielding for glare control.
Cat. No.
l FH-CFL/BL
Black
l FH-CFL/DB
Dark Bronze
l FH-CFL/LG
Light Gray
l FH-CFL/SG
Stealth Gray™
l FH-CFL/PS
Platinum Silver
l FH-CFL/WH White
Full Shield
Cat. No. (see right)
l No Option
Formed .062 thick aluminum. Easily attaches to pre-drilled
holes in the lens frame with stainless steel screws. Provides
complete shielding for glare control.
CAUTION: Do not use in locations where leaves and trash
can collect inside shield.
Cat. No.
l FS-CFL/BL
Black
l FS-CFL/DB
Dark Bronze
l FS-CFL/LG
Light Gray
l FS-CFL/SG
Stealth Gray™
l FS-CFL/PS
Platinum Silver
l FS-CFL/WH White
3" (76.2 mm)
TYPICAL
10G"
(265.1 mm)
3K"
(88.9 mm)
4C"
(111.1 mm)
10G"
(265.1 mm)
© 2014 KIM LIGHTING INC. • 16555 East Gale AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
3K"
(88.9 mm)
4C"
(111.1 mm)
CFL
Compact Floodlights
revision 11/13/14 • kl_cfl_spec.pdf
Type:
Job:
Page: 4 of 6
Mounting Options
Ordered Separately from Fixture
Brass In-Grade
Architectural Junction
Box
Cat. No. (see right)
l No Option
Die-cast brass with K” NPSM fixture mount and die-cast
3L" DIA.
cover. Internal set screw provided for locking position. 21 cu
(95.3 mm)
in. internal volume.
K"
K" (12.7 mm)
(12.7 mm)
NPSM
l JBR-2
(2) K” NPT in bottom
Fixture Mount
l JBR-3(2) L” NPT in bottom
l JBR-21
(2) K” NPT in sides, (2) K” NPT in bottom
3"
l JBR-24
(4) K” NPT in sides, (2) K” NPT in bottom
(76.2 mm)
Note: All side taps provided with plugs.
Application Notes
•Creates a flush-mounted appearance.
Optional
•May be cast in concrete for increased stability.
Concrete
CAUTION: Fixture stem and swivel must not contact soil or
(by others)
standing water. Provide drainage away from junction box.
Composite In-Grade
Architectural Junction Box
Cat. No.
l JBR-4
l JBR-5
l No Option
Composite box with K” NPSM fixture mount and composite
cover. 19 cu in. internal volume.
JBR-4 (2) L” NPT knockouts in bottom.
(4) L” NPT knockouts on sides.
JBR-5 Same as above but with brass cover.
Brass In-grade Staked
Junction Box
Cat. No.
l JBR30
JBR30
BRASS IN-GRADE STAKED JUNCTION BOX
Die-cast brass with K NPSM fixture mount and
die-cast cover. Internal set screw provided for locking
position. 21 cu in. internal volume.
(2) K” NPT in bottom with (2) 19” long brass stakes
NOTE: May also be used to hard mount low voltage fixtures.
l No Option
Brass In-grade Staked
Junction Box with Cord
Cat. No.
l JBR32
l No Option
3L" DIA.
K" NPSM
Fixture
Mount
(95 mm)
L"
(19 mm)
3D"
(92 mm)
CAUTION: Fixture stem and swivel must not contact soil
or standing water. Provide drainage away from J-Box.
JBR32
BRASS IN-GRADE STAKED JUNCTION BOX WITH
CORD
Die-cast brass with K” NPSM fixture mount and
die-cast cover. Internal set screw provided for locking
position. 21 cu in. internal volume. 9’ (SJTW-A) 3 wire
cord and plug.
(2) 19” long brass stakes with 9’ cord
Application Notes
• Creates a flush-mounted appearance.
• May be cast in concrete for increased stability.
CAUTION: Fixture stem and swivel must not contact soil or
standing water. Provide drainage away from junction box.
3L" DIA.
(95.3 mm)
K" (12.7 mm)
NPSM
Fixture
Mount
3K"
(88.9 mm)
19C"
(492.1 mm)
© 2014 KIM LIGHTING INC. • 16555 East Gale AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
18D"
(473.1 mm)
1"
(25.4 mm)
CFL
Compact Floodlights
revision 11/13/14 • kl_cfl_spec.pdf
Type:
Job:
Page: 5 of 6
Mounting Options
Ordered Separately from Fixture
Stanchion Mount
Cat. No. (see right)
l No Option
Surface Mount
Cat. No. (see right)
l No Option
Architectural Wall Mount
Cat. No. (see right)
l No Option
3” O.D. by .188” wall cast low copper (<0.6% Cu)
aluminum with K” NPSM fixture mount and hand hole with
flush cover. Internal set screw fixture lock accessible through
hand hole. Internal ground lug supplied with installed lead.
Cat. No.
l SM18/BL
Black
l SM18/DB
Dark Bronze
l SM18/LG
Light Gray
l SM18/SG
Stealth Gray™
l SM18/PS
Platinum Silver
l SM18/WH White
Cast low copper (<0.6% Cu) aluminum with mounting ears
for wood screw attachment to tree or wood structure. 5.5
cu in. splice compartment with gasketed cover. K” NPSM
fixture mount and K” NPSM conduit or cord seal entry.
Note: Surface mount can be connected to conduit or
outdoor cord with a waterproof cord seal (by others).
Cat. No.
l J-27N/BL
Black
l J-27N/DB
Dark Bronze
l J-27N/LG
Light Gray
l J-27N/LG
Stealth Gray™
l J-27N/PS
Platinum Silver
l J-27N/WH White
Die-cast, low copper (<0.6% Cu) aluminum with K” NPSM
fixture mount. Internal set screw provided for locking
position. Canopy attaches to stainless steel wall plate for
mounting to any standard electrical outlet box.
Cat. No.
l JW/BL
Black
l JW/DB
Dark Bronze
l JW/LG
Light Gray
l JW/SG
Stealth Gray™.
l JW/PS
Platinum Silver
l JW/WH
White
3" DIA.
(76.2 mm)
K" (12.7 mm)
NPSM
Fixture
Mount
6" MIN.
(152.4 mm)
12" MAX.
(304.8 mm)
18"
(457.2 mm)
K" (12.7 mm)
NPSM Fixture
Mount
2F" (55.6 mm)
1L" (44.5 mm)
4K" (114.3 mm)
K" (12.7 mm)
NPSM Conduit
Entry
5" DIA.
(127.0 mm)
K" (12.7 mm)
NPSM Fixture
Mount
© 2014 KIM LIGHTING INC. • 16555 East Gale AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
CFL
Compact Floodlights
revision 11/13/14 • kl_cfl_spec.pdf
Type:
Job:
Page: 6 of 6
Mounting Options
Ordered Separately from Fixture
PowerPost™ by
Engineered Products Co.
Cat. No. l EP17
l No Option
3J" DIA.
PVC fixture molded in black with K” NPT mount is
(82.6 mm)
corrosion free and UV resistant. Replaces EMT, conduit
connectors and weatherproof boxes. 100% shatter resistant K" (12.7 mm)
against denting and cracking. Angled bottom to eliminate NPSM Fixture
Mount
cable congestion.
NOTE: Should be used with a UL listed fixture and
grounding means (i.e., third wire) suitable for use in
wet locations.
17K"
1" (25.4 mm)
(444.5 mm)
3K" (88.9 mm)
5"(127.0 mm)
Architectural Junction
Box
Cat. No. (see right)
l No Option
Portable Spear Mount
Cat. No. l J-25N
l No Option
Die-cast, low copper (<0.6% Cu) anodized aluminum
cylindrical body and matching cover with K” NPSM fixture
mount. Internal set screw provided for locking position. Two
K” NPSM in bottom, 17 cu in. internal volume.
CAUTION: Junction box must be installed high enough to
avoid contact with soil or standing water.
Cat. No.
l JB1/BL
Black
l JB1/DB
Dark Bronze
l JB1/LG
Light Gray
l JB1/SG
Stealth Gray™.
l JB1/PS
Platinum Silver
l JB1/WH
White
Cast iron with K” NPSM fixture mount. Hot dip galvanized
finish. 5.5 cu in. splice compartment. 9’ (SJTW-A) 3 wire
cord and plug.
Note: For use with incandescent, halogen, and fluorescent
fixtures only.
3" DIA.
(76.2 mm)
K" (12.7 mm)
NPSM Fixture
Mount
4L"
(120.7 mm)
Cover
(2) K" (12.7 mm)
NPSM
3K" DIA.
(88.9 mm)
K" (12.7 mm)
NPSM Fixture
Mount
2J"
(57.2 mm)
6E"
(174.6 mm)
© 2014 KIM LIGHTING INC. • 16555 East Gale AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716