Programmable
DC Power Supply
MODEL 62000K SERIES
Key Features :
■
■
■
■
■
■
■
■
■
PROGRAMMABLE DC POWER SUPPLY
MODEL 62000K SERIES
Chroma 62000K series combines the best of DC
power processing with microprocessor embedded
control. Chroma Electronics' innovative power
processing technology improves response,
shrinks package size, and reduces cost. 62000K
series power supplies are current-fed and are
more tolerant to abusive loads than conventional
switching power supplies. This technology allows
the power supply to operate under short-circuit
conditions, open-circuit conditions, and everything in-between.
62000K series power supplies offer both master/
slave parallel and series operation. This enables
two or more power supplies to be placed in
parallel for increased output current or in series
for increased output voltage. With master/slave
operation, power supplies operate at near equal
voltage and current.
62000K series power supplies can operate as a
voltage source or current source depending on
the control settings and load conditions. If the
power supply is operating as a voltage source and
the load increases to a point beyond the current
command setting, the power supply automatically
crosses over to current mode control and operates
62000K series power supplies contain circuitry to
work harmoniously with other power equipment.
Step-start contactors are used to keep inrush
current below full scale operating current. Filter
components lower current harmonic content
emanating from the power supply and increase
power factor to levels beyond 90%. Every power
supply is tested at 90% to 125% nominal line to
insure satisfactory operation even under the worst
line voltage conditions.
62000K series power supplies have extensive
d i a g n o s t i c f u n c t i o n s- a l l o f w h i c h, w h e n
activated, take command to shut down the
system. Diagnostic functions include phase loss,
excessive thermal conditions, over voltage trip,
over current trip, fuse clearing, and program line.
Program line monitors externally applied analog
set point signals to insure they are within the
specified range. Upon a diagnostic fault condition,
main power is disconnected and the diagnostic
condition, main power is disconnected and the
diagnostic condition is latched into memory.
Pressing the clear key clears the memory. All
diagnostic functions can be monitored through a
rear connector.
as a current source at that setting.
RS-232
GPIB
USB
RS-485
Ethernet
■
■
■
■
■
■
■
Power range : 30KW-150KW
Voltage range : 0 - 4000V
Current range : 0 - 6000A
High power density (45KW in 9U)
Wide range of input voltages :
From 208Vac to 480Vac at 50Hz,
60Hz and 400Hz
37-pin optically isolated user I/O circuitry
standard :
No additional isolation circuitry necessary
Front panel analog potentiometers :
Stepless rotary control
High efficiency operation :
Up to 88% efficiency under full load
RS232 interface standard with SCPI
Commands :
GPIB, USB, Ethernet, RS485 interfaces
optional
Optional Ethernet communications :
Embedded web-server
OVT and OCT shutdown standard :
Mechanical contactors disconnect input
mains
LabWindows/CVI, LabVIEW, and IVI Drivers
Programmable Output Modulation :
Emulates user-defined power profiles
Automatic Voltage/Current Crossover
Front Panel Calibration
CE Certified (Option EMI Filter)
RELIABLE CONTROL TECHNOLOGY
Isolated External I/O for Automation
Using the rear 37-pin I/O connector, the 62000K series power supplies
can be completely controlled and monitored using external signals.
The voltage, current, over voltage trip, and over current trip set
points are set by applying a 0-10Vdc analog signals. Each diagnostic
condition is given a designated pin, which reads 5Vdc when high. Also,
the power supply features an external interlock, which when enabled,
allows the power supply to be tied in with other emergency stop
equipment. All these pins are isolated to earth-ground as standard-no
additional isolation circuitry necessary!
Embedded Ethernet
Ethernet technology designed to provide modularity, flexibility and
performance to small- and medium-sized systems. The advantages
Remote Interface Software
The Remote Interface Software ships with all 62000K series power
supplies. The software provides the user with an easy and intuitive
method to operate a Chroma Electronics' power supply with computer
are exemplified in its compact, flexible package providing high-speed
I/O and reliable measurements. These features meet the needs of R&D
and manufacturing engineers delivering electronics for the aerospace/
defense, automotive, industrial, and medical markets.
control. The Remote Interface Software has six windows:
• Virtual Control Panel
• Command Panel
• Register Panel
• Calibration Panel
• Firmware Panel
• Modulation Panel
The Virtual Control Panel emulates the 62000K series front panel,
the command panel programs and reads SCPI commands with user
friendly buttons, the Register Panel programs and reads registers, the
Calibration Panel enables calibration of the digital potentiometers,
the Firmware Panel enables the program stored internal to the power
supply to be upgraded, and the Modulation Panel eases programming
of modulation parameters.
The 62000K series Ethernet option includes an embedded web-server,
allowing web browser power supply control and monitoring from
virtually anywhere.
APPLICATIONS
Automated Test Equipment (ATE)
Water Treatment, Electrolysis, and Chemical Processes
High power density and isolated rear I/O mark the 62000K series
Low ripple, excellent controls, and high reliability mark the 62000K
the ideal DC power source for rackmount system. The analog I/O
series a solid choice for applications in electrodeionization (EDI) and
port allows you to connect a programmable logic controller or other
electrolysis. Our supplies can be found around the world powering
external controls to set voltage, current, trip points, and monitor all
EDI modules. For hydrogen production, high efficiency and advanced
the power supply's diagnostic using industry standard +5Vdc signals.
diagnostics make the 62000K Series a smart choice.
Automotive Drive Testing / Burn-in
Research at Universities and National Labs
Whether for developing hybrid / electric power trains or testing
62000K series can be found in research facilities, universities,
and burning-in electric motors, our DC supplies are proven in
and national laboratories around the globe. Our wide range of
the automotive industry. With high current capabilities, transient
output voltage, robust current-fed power processing technology,
response, and robust safety features, our power supplies are applied to
and commitment to our customers and their applications have
a large number of automotive applications.
differentiated us from the competition.
Programming Sequential Step Applications
Battery Charging
62000K Series power supplies have the power ful feature of
A temperature compensated battery charger for applications with
programming output voltage, output current, over voltage trip, over
lead acid batteries. Diode D1, placed between the power supply and
current trip, and period for 100 memory states. The different states
battery, blocks current from flowing from the battery to the power
can be selected by the user, timed stepped(0-9997s), or triggered
supply. This eliminates any loading on the battery when the power
through the front panel or rear connector. Memory states 0 through 9
supply is off and prevents the battery from charging the power
can be set though the front panel and memory states 0 to 99 can be
supply's output capacitors. Remote sensing should be applied across
set through the RS232, optional IEEE-488, or optional Ethernet
the battery terminals to compensate for the diode drop. By setting the
interface.
voltage and current to the bulk charge voltage and maximum charge
current, the power supply will initially charge the batteries in current
mode control and then automatically crossover to voltage mode
control when the dependent, sequential step operation to equalize
and float charge the batteries after bulk charging.
Programming Sequential Steps
Temperature copensated battery charger
PANEL DESCRIPTION
Model 62030K Series
1
10
2
3
11
4
5
12
6
7
8
9
13
14
Option GPIB
interface
JS4
JS1
JS3
Option Ethernet
interface
JS5
JS1
JS3
1. Energizes Control Circuit
Without turning the main power on
2. Switches Main Power ON & OFF
3. Rotary Key
Adjust the V&I output point
4. Display
Display setting & reading
5. Alarm Indicator
LOC: interlock
PGL: external input beyond limits
PHL: indicates a problem with input voltage
THL: indicates over-temperature
OVT: shows over voltage protection has tripped
OCT: shows over current protection has tripped
FSE: warns that a fuse has cleared
ARM: indicates power supply is ready for
operating in auto sequencing
6. Memory Indicator
For program auto sequence
7. Numeric Key
8. Functions Key
MENU: selects function
ITEM: selects item within function
DISPLAY: displays voltage and current setting
ARM: arms power supply for auto sequencing through
states stored in memory
MEM: sets memory
CLEAR: clears setting or reset fault condition
▲ : up
▼ : down
9. Operation Mode
POWER: indicates power output
STANDBY: indicates control power only
REM SEN: indicates remote sense
INT CTL: front panel controls enabled
EXT CTL: external controls enabled
ROTARY: potentiometer voltage/current control
KEYPAD: keypad voltage/current control
EXT PGM: external voltage/current control
10. Output Terminal
Connect the output cable to a UUT
11. Remote Interface Port
Connector JS1: Standard APG I/O interface
Connector JS3: Standard RS232 interface
Connector JS4: Optional GPIB interface
Connector JS5: Optional Ethernet interface
12. Air Exhaust
13. Sense Terminal (Connector JS2)
Connect the UUT for voltage compensation
14. AC Input Terminal
Dimension SPECIFICATIONS
Unit = inch
Model 62030K/62045K Series
Front Panel
Rear Panel
Side Panel
Dimensions (Inches)
Power
A
B
C
30kw
3.000(7.620cm)
2.250(5.715cm)
10.469(26.591cm)
45kw
4.750(12.065cm)
4.000(10.160cm)
15.719(39.926cm)
DIMENSION SPECIFICATIONS
Model 62060K/62075K Series
Front Panel
Model 62000K Series
Rear Panel
All specifications are subject to change without notice.
Please visit our website for the most up to date specifications.
DIMENSION SPECIFICATIONS
Model 62100K/62150K Series
Front Panel
Rear Panel
62.500
ORDERING INFORMATION
Series Name
Model Name
Output Voltage Range
Output Current Range
Output Power Range
62030K
See Specification table
16Vdc to 4000Vdc
1800Adc to 7.2Adc
28.8KW to 30KW
62045K
See Specification table
16Vdc to 4000Vdc
2700Adc to 10.8Adc
43.2KW to 45KW
62060K
See Specification table
16Vdc to 4000Vdc
3600Adc to 14.4Adc
57.6KW to 60KW
62075K
See Specification table
16Vdc to 4000Vdc
4500Adc to 18Adc
72KW to 75KW
62100K
See Specification table
16Vdc to 4000Vdc
6000Adc to 24Adc
96KW to 100KW
62150K
See Specification table
25Vdc to 4000Vdc
6000Adc to 36Adc
144KW to 150KW
Input Voltage Range
Options
GPIB Interface
Ethernet Interface
USB to RS232 Adapter
RS485 to RS232 Adapter
EMI Filter
UID46 (Master/Slave Link Box)
Note *1 : The 62000K series power supplies are manufactured to operate on 208/240/380/415/440/480 vac, pls specified at time of order.
Note *2 : GPIB or Ethernet Interface (alternative), pls specified at time of order.
Note *3 : EMI Filter. (Factory option)
208Vac
240Vac
380Vac
415Vac
440Vac
480Vac
380Vac
415Vac
440Vac
480Vac
SPECIFICATIONS
62030K Series Models
Model
62030K-16
62030K-20
62030K-32
62030K-40
62030K-50
62030K-80
62030K-100
62030K-125
62030K-160
62030K-200
62030K-250
62030K-375
62030K-500
62030K-600
62030K-800
62030K-1000
62030K-1500
62030K-2000
62030K-3000
62030K-4000
VOLTS
(Vdc)
0-16
0-20
0-32
0-40
0-50
0-80
0-100
0-125
0-160
0-200
0-250
0-375
0-500
0-600
0-800
0-1000
0-1500
0-2000
0-3000
0-4000
AMPS
(Adc)
0-1800
0-1500
0-900
0-750
0-600
0-372
0-300
0-240
0-186
0-150
0-120
0-78
0-60
0-48
0-36
0-30
0-19.8
0-15
0-9.6
0-7.2
RIPPLE
(mVrms)
35
40
40
40
50
60
60
100
120
125
130
170
220
250
300
350
400
450
500
550
AMPS
(Adc)
0-2700
0-2250
0-1350
0-1125
0-900
0-558
0-450
0-360
0-279
0-225
0-180
0-117
0-108
0-90
0-72
0-54
0-45
0-27.7
0-22.5
0-14.4
0-10.8
RIPPLE
(mVrms)
35
40
40
40
50
60
60
100
120
125
130
170
200
220
250
300
350
400
450
500
550
Eff%
86
86
86
87
87
87
87
87
87
87
88
88
88
88
88
88
88
88
88
88
208/240V
108
108
108
108
108
108
106
106
106
106
106
106
106
106
106
106
106
106
106
106
Input Current(Aac)
380/415V
60
60
60
60
60
60
58
58
58
58
58
58
58
58
58
58
58
58
58
58
440/480V
54
54
54
54
54
54
52
52
52
52
52
52
52
52
52
52
52
52
52
52
208/240V
162
162
162
162
162
162
159
159
159
159
159
159
159
159
159
159
159
159
159
159
159
Input Current(Aac)
380/415V
90
90
90
90
90
90
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
440/480V
81
81
81
81
81
81
78
78
78
78
78
78
78
78
78
78
78
78
78
78
78
62045K Series Models
Model
62045K-16
62045K-20
62045K-32
62045K-40
62045K-50
62045K-80
62045K-100
62045K-125
62045K-160
62045K-200
62045K-250
62045K-375
62045K-400
62045K-500
62045K-600
62045K-800
62045K-1000
62045K-1500
62045K-2000
62045K-3000
62045K-4000
VOLTS
(Vdc)
0-16
0-20
0-32
0-40
0-50
0-80
0-100
0-125
0-160
0-200
0-250
0-375
0-400
0-500
0-600
0-800
0-1000
0-1500
0-2000
0-3000
0-4000
Eff%
86
86
86
87
87
87
87
87
87
87
88
88
88
88
88
88
88
88
88
88
88
Note *1 : Rating specification at 208, 380, and 440V input.
Note *2 : CE/Safety recognition of 62030K & 62045K Series power supplies is based on rack mounted applications only. Use of these power
supplies outside of a rack mount equipment enclosure will expose the user to high voltage and/or high current sources. Extreme caution
must be used under these circumstances.
SPECIFICATIONS
62060K Series Models
Model
62060K-16
62060K-20
62060K-32
62060K-40
62060K-50
62060K-80
62060K-100
62060K-125
62060K-160
62060K-200
62060K-250
62060K-375
62060K-400
62060K-500
62060K-600
62060K-800
62060K-1000
62060K-1500
62060K-2000
62060K-3000
62060K-4000
VOLTS
(Vdc)
0-16
0-20
0-32
0-40
0-50
0-80
0-100
0-125
0-160
0-200
0-250
0-375
0-400
0-500
0-600
0-800
0-1000
0-1500
0-2000
0-3000
0-4000
AMPS
(Adc)
0-3600
0-3000
0-1800
0-1500
0-1200
0-744
0-600
0-480
0-372
0-300
0-240
0-156
0-144
0-120
0-96
0-72
0-60
0-39.6
0-30.0
0-19.2
0-14.4
RIPPLE
(mVrms)
35
40
40
40
50
60
60
100
120
125
130
170
200
220
250
300
350
400
450
500
550
AMPS
(Adc)
0-4500
0-3750
0-2250
0-1875
0-1500
0-930
0-750
0-600
0-465
0-375
0-300
0-195
0-180
0-150
0-120
0-90
0-75
0-49.5
0-37.5
0-24.0
0-18.0
RIPPLE
(mVrms)
35
40
40
40
50
60
60
100
120
125
130
170
200
220
250
300
350
400
450
500
550
Eff%
86
86
86
87
87
87
87
87
87
87
88
88
88
88
88
88
88
88
88
88
88
208/240V
216
216
216
216
216
216
212
212
212
212
212
212
212
212
212
212
212
212
212
212
212
Input Current(Aac)
380/415V
120
120
120
120
120
120
116
116
116
116
116
116
116
116
116
116
116
116
116
116
116
440/480V
108
108
108
108
108
108
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
208/240V
270
270
270
270
270
270
265
265
265
265
265
265
265
265
265
265
265
265
265
265
265
Input Current(Aac)
380/415V
150
150
150
150
150
150
145
145
145
145
145
145
145
145
145
145
145
145
145
145
145
440/480V
135
135
135
135
135
135
130
130
130
130
130
130
130
130
130
130
130
130
130
130
130
62075K Series Models
Model
62075K-16
62075K-20
62075K-32
62075K-40
62075K-50
62075K-80
62075K-100
62075K-125
62075K-160
62075K-200
62075K-250
62075K-375
62075K-400
62075K-500
62075K-600
62075K-800
62075K-1000
62075K-1500
62075K-2000
62075K-3000
62075K-4000
VOLTS
(Vdc)
0-16
0-20
0-32
0-40
0-50
0-80
0-100
0-125
0-160
0-200
0-250
0-375
0-400
0-500
0-600
0-800
0-1000
0-1500
0-2000
0-3000
0-4000
Note : Rating specification at 208, 380, and 440V input.
Eff%
86
86
86
87
87
87
87
87
87
87
88
88
88
88
88
88
88
88
88
88
88
SPECIFICATIONS
62100K Series Models
Model
VOLTS (Vdc)
AMPS (Adc)
RIPPLE (mVrms)
Eff%
0-16
0-20
0-32
0-40
0-50
0-80
0-100
0-125
0-160
0-200
0-250
0-375
0-400
0-500
0-600
0-800
0-1000
0-1250
0-1600
0-2000
0-2500
0-3000
0-4000
0-6000
0-5000
0-3000
0-2500
0-2000
0-1250
0-1000
0-800
0-620
0-500
0-400
0-270
0-250
0-200
0-160
0-120
0-100
0-80
0-62
0-50
0-40
0-32
0-24
35
40
40
40
50
60
60
100
120
125
130
170
180
220
250
300
400
500
600
800
900
1000
1100
90
90
90
91
91
91
91
91
91
91
92
92
92
92
92
92
92
92
92
92
92
92
92
VOLTS (Vdc)
AMPS (Adc)
RIPPLE (mVrms)
Eff%
40
40
40
50
60
60
100
120
125
130
170
180
220
250
300
400
500
600
800
900
1000
1100
90
90
90
91
91
91
91
91
91
92
92
92
92
92
92
92
92
92
92
92
92
92
62100K-16
62100K-20
62100K-32
62100K-40
62100K-50
62100K-80
62100K-100
62100K-125
62100K-160
62100K-200
62100K-250
62100K-375
62100K-400
62100K-500
62100K-600
62100K-800
62100K-1000
62100K-1250
62100K-1600
62100K-2000
62100K-2500
62100K-3000
62100K-4000
Input Current
380/415V
440/480V
191
165
191
165
191
165
191
165
191
165
191
165
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
186
160
62150K Series Models
Model
62150K-25
0-25
62150K-32
0-32
62150K-40
0-40
62150K-50
0-50
62150K-80
0-80
62150K-100
0-100
62150K-125
0-125
62150K-160
0-160
62150K-200
0-200
62150K-250
0-250
62150K-375
0-375
62150K-400
0-400
62150K-500
0-500
62150K-600
0-600
62150K-800
0-800
62150K-1000
0-1000
62150K-1250
0-1250
62150K-1600
0-1600
62150K-2000
0-2000
62150K-2500
0-2500
62150K-3000
0-3000
62150K-4000
0-4000
Note : Rating specification at 380, and 440V input.
0-6000
0-4500
0-3750
0-3000
0-1850
0-1500
0-1200
0-160
0-750
0-600
0-400
0-375
0-300
0-240
0-180
0-150
0-120
0-90
0-75
0-60
0-48
0-36
Input Current
380/415V
440/480V
287
248
287
248
287
248
287
248
287
248
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
278
240
OTHER SPECIFICATIONS
Series
Input
Nominal Voltage
(3 phase, 3 wire+ground)
Frequency
Power Factor
Output
Ripple
Line Regulation(Voltage)
Line Regulation(Current)
Load Regulation(Voltage)
Load Regulation(Current)
Load Transient Response(Time)
Load Transient Response(Step)
Efficiency
Stability
Maximum Slew Rate(Voltage)
Maximum Slew Rate(Current)
Isolation
62030K
62045K
62060K
62075K
208 VAC, 3φ (operating range 187 - 229 VAC)
240 VAC, 3φ (operating range 216 - 264 VAC)
380 VAC, 3φ (operating range 342 - 418 VAC)
415 VAC, 3φ (operating range 373 - 456 VAC)
440 VAC, 3φ (operating range 396 - 484 VAC)
480 VAC, 3φ (operating range 432 - 528 VAC)
50Hz ~ 400Hz
Greater than 92% at maximum power
62100K
62150K
380 VAC, 3φ
(operating range 342 - 418 VAC)
415 VAC, 3φ
(operating range 373 - 456 VAC)
440 VAC, 3φ
(operating range 396 - 484 VAC)
480 VAC, 3φ
(operating range 432 - 528 VAC)
50Hz ~ 60Hz
Greater than 92% at maximum power
See Model Charts
± 0.004% of full scale
± 0.02% of full scale
± 0.01% of full scale
± 0.04% of full scale
2 ms to recover within ± 1% of regulated output
with a 50%-100% or 100%-50% step load change
≥ 86% (See Model Charts)
≥ 90% (See Model Charts)
± 0.10% for 8 hrs. after 30 min. warmup
100 ms for output voltage change from 0 to 63%
100 ms for output current change from 0 to 63%
"Maximum input voltage to ground: ±2500 VAC
For models less than or equal to 1000 Vdc:Maximum output voltage to ground: ±1000 VDC
For models greater than 1000 Vdc:Maximum output voltage to ground: ±4000 VDC
User I/O circuitry: referenced to earth ground"
Programming Accuracy and Levels
Voltage (Analog)
± 0.50% of full scale
Current(Analog)
± 0.75% of full scale
OVT(Analog)
± 0.50% of full scale
OCT(Analog)
± 0.75% of full scale
Voltage(Digital)
± 0.50% of full scale
Current(Digital)
± 0.75% of full scale
OVT(Digital)
± 0.50% of full scale
OCT(Digital)
± 0.75% of full scale
Analog Programming Levels
0 - 10.0 V
Monitor Accuracy and Levels
Voltage(Analog)
± 0.50% of full scale
Current(Analog)
± 0.75% of full scale
Voltage(Digital)
± 0.50% of full scale
Current(Digital)
± 0.75% of full scale
Analog Monitoring Levels
0 - 10.0 V
Control Limits
Remote Sense Limits
3% maximum voltage drop from output to load
Digital Control Inputs Limits
Input voltage: 0 to 5 V
Digital Control Outputs Limits
Output voltage: 0 to 5 V, 5 mA drive capacity
Environmental
Operating Temperature
0˚C ~ 50˚C
Storage Temperature
-25˚C ~ 85˚C
Temperature Coefficient
0.04/˚C of maximum output current
Air Cooling
Side air inlet, rear exhaust
Front and rear intake,top exhaust
Front and rear intake, top exhaust
Physical
26.0x48.3x61.0cm/ 40.0x48.3x61.0cm/ 97.8x55.9x73.7cm/ 124.5x55.9x73.7cm/ 158.8x121.9x80.0cm/ 158.8x121.9x80.0cm/
Dimensions(H x W x D)
10.25 x 19 x 24 in
15.75 x 19 x 24 in
38.5 x 22 x 29 in
49 x 22 x 29 in
62.5 x 48 x 31.5 in
62.5 x 48 x 31.5 in
Weight
107.50 kg/ 237 lbs
158.30 kg / 349 lbs
231.3 kg / 510 lbs
292.6 kg / 645 lbs
725.8 kg / 1600 lbs 952.5 kg / 2100 lbs
All specifications are subject to change without notice. Please visit our website for the most up to date specifications.
Distributed by:
Developed and Manufactured by :
CHROMA ATE INC.
致茂電子股份有限公司
HEADQUARTERS
No. 66, Hwa-Ya 1st Rd.,
Hwa-Ya Technology Park,
Kuei-Shan Hsiang
Taoyuan County 33383
Taiwan
Tel: +886-3-327-9999
Fax: +886-3-327-8898
http://www.chromaate.com
E-mail: chroma@chroma.com.tw
CHINA
CHROMA ELECTRONICS
(SHENZHEN) CO., LTD.
8F, No.4, Nanyou Tian An
Industrial Estate, Shenzhen,
China PC: 518052
Tel: +86-755-2664-4598
Fax: +86-755-2641-9620
JAPAN
CHROMA JAPAN CORP.
472 Nippa-cho, Kouhoku-ku,
Yokohama-shi, Kanagawa,
223-0057 Japan
Tel: +81-45-542-1118
Fax: +81-45-542-1080
http://www.chroma.co.jp
U.S.A.
CHROMA SYSTEMS
SOLUTIONS, INC.
25612 Commercentre Drive,
Lake Forest, CA 92630-8830
Tel: +1-949-600-6400
Fax: +1-949-600-6401
Toll Free: +1-866-600-6050
http://www.chromausa.com
E-mail: sales@chromausa.com
EUROPE
CHROMA ATE EUROPE B.V.
Morsestraat 32, 6716 AH Ede,
The Netherlands
Tel: +31-318-648282
Fax: +31-318-648288
http://www.chromaeu.com
E-mail: sales@chromaeu.com
Worldwide Distribution and Service Network
62000K-E-201002-PDF