MR16
Corners
LINEROLC6A
LED Direct Linear Suspended /
Satine Lens
Project Name
Date
100% Direct
80% Direct
Catalog Number
1-1/8”
(28.6mm)
Year LED
Warranty
LFL
6-7/8” (174.6mm)
LED
LFL
100% Direct
L U M I N A I R E S P E C I F I C AT I O N
____-
1-1/8”
(28.6mm)
1-13/16”
(46mm)
Convertible
LED
LC6A100Linero Curved
6, Satine Lens,
100% Direct
Type
6-7/8” (174.6mm)
Convertible
HOUSING
20% Direct
with a 1-1/8” (28.6mm) side profile. Standard 4’-0” (1219.2mm) and 8’-0” (2438.4mm) fixtures can be joined to create
continuous runs.
REFLECTOR Standard high reflectance die-formed white painted aluminum.
ENDCAPS Die-cast aluminum endcaps are fastened with concealed hardware.
LENS .125” (3.2mm) white satine lens with matte finish. Clear dust guard is standard with fixture.
ELECTRICAL Electronic, 120 to 277 volt input and 36V output. 0-10 volt dimming standard. Must specify 1D in circuiting
for dimming.
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
R9≥20, 27K is CRI≥90, 30K, 35K, and 40K is CRI≥82. Minimum lifetime greater than 60,000 hours.
MOUNTING Adjustable aircraft cable mounts on 4’-0” (1219.2mm) and 8’-0” (2438.4mm) centers. Available in single
Staggered
or dual aircraft cable. Refer to installation instructions for appropriate ceiling detail.
Lamps
FINISH Standard powder-coat textured white, metallic silver, textured black or bronze painted finish, consult factory
for chip of standard paint finishes. Pendants and canopies painted white unless specified differently in the options
section of the part number. Contact factory for additional custom color and finish options.
WARRANTY Edge LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
Staggered
Lamps
LABELS UL and cUL Listed, approved for dry/damp location unless otherwise noted.
Installation
Instructions
MADE
IN USA
LC6A100-
6-9/16”
CONSTRUCTION One piece die-formed 18 gauge steel housing in a 6-7/8” (174.6mm) by 1-13/16” (46mm) profile
STANDARD LIGHT DISTRIBUTION
Direct 100%
PowerDensity
6-9/16”
_____-
COLOR/LUMENS
LAMPS
LENGTH
LENGTH
MOUNTING
MOUNTING
Individual Units
4- 4’ (1219.2mm) individual
8- 8’ (2438.4mm) individual
Continuous Runs
xx’- Specify nominal overall row
length in 4’ (1219.2mm)
increments
Custom Output
CL_____- Specify color temp. and lumens/ft. (i.e. CL35600)
CW____- Specify color temp. and wattage/ft. (i.e. CW407.5)
(Specify lumens/watts between standard offering listed above.
Lumens are specified per color temp.)
20% Direct
Sample Catalog #: LC6A100-35HO-32’-AC48G1-120-1C-W
___’-
27K Color Temperature Lumen Options
27- 27K, 326 lumens/ft (5.2 watts/ft)
27HO- 27K, 592 lumens/ft (10.2 watts/ft)
30K Color Temperature Lumen Options
30- 30K, 397lumens/ft (5.2 watts/ft)
30HO- 30K, 720 lumens/ft (10.2 watts/ft)
35K Color Temperature Lumen Options
35- 35K, 415 lumens/ft (5.2 watts/ft)
35HO- 35K, 752 lumens/ft (10.2 watts/ft)
40K Color Temperature Lumen Options
40- 40K, 426 lumens/ft (5.2 watts/ft)
40HO- 40K, 772 lumens/ft (10.2 watts/ft)
80% Direct
___VOLTAGE
VOLTAGE
__CIRCUITING
CIRCUITING
120- 120 V
277- 277 V
UNV- UNV
(120-277)
__-
___
FINISH
FINISH
OPTIONS
W- Matte White
S- Metallic Silver7
BL- Textured Black7
BR- Bronze7
CC- Custom Color7
1C1D1E-
Single Circuit
Single Circuit Dimming4
Single Circuit with
Emergency Circuit4
Adjustable Aircraft Cable1,2
AC48G1- 1” (25.4mm) T-Bar
AC48G9- 9/16” (14.3mm) T-Bar
AC48GS- Slotted T-Bar
AC48JB- Junction Box
AC48ST- Structure
AC548G_- 5” (127mm) Non-Power Canopy3
AC548JB- 5” (127mm) Non-Power Canopy3
SQ48G_- 5” (127mm) Square Canopy3
SQ48JB- 5” (127mm) Square Canopy3
Dual Adjustable Aircraft Cable1,2,6
DAC48G1- 1” (25.4mm) T-Bar
DAC48G9- 9/16” (14.3mm) T-Bar
DAC48GS- Slotted T-Bar
DAC48JB- Junction Box
DAC48ST- Structure
DSM- Daylight Sensor
Master (sensor included)5
DSS- Daylight Sensor
Satellite (sensor not
included)5
CL90 Degree Corner
CC-C- Custom Color
Canopy7
Standard 48” Adjustable Cable. Consult factory for additional lengths. 2Consult factory for tegular edged tiles. 3Replaces standard 2” non-power canopy. Square canopy replaces standard round. Must
specify grid ceiling type on AC548G__ and SQ48G__. Select from G1 (1” grid), G9 (9/16” grid), or GS (slotted); for example AC548G1. 4Some Linero configurations will not accommodate all electrical options.
Consult factory. 5See back page for ordering information. Requires 0-10 volt dimming. Must specify 1D in Circuiting. 6Square canopies supplied with dual aircraft cable mount. Round canopy not available
with dual aircraft cable. 7If canopy is to match fixture housing, must specify CC-C. If not specified canopy will be standard matte white.
1
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568
www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
L_100
PHOTOMETRICS
SingleL_75
Aircraft Cable
(AC)
Dual Aircraft Cable
(DAC)
1073
977
805
733
537
488
Linero 6 Components
268
Example 3
8DSM
Dual Aircraft Cable
16’
8’ fixture with a Daylight Sensor and 8’(DAC)
fixture wired to DSM fixture
Specify: L6A35-30HO-16’-AC48G1-120-1C-W-8DSM+8DSS
L_35
Example 4
1243
8DSM
82C
16’
8’ fixture with a Daylight Sensor + 8’ fixture wired
932 as standard dual circuit (not wired to the sensor)
Specify: L6A35-30HO-16’-AC48G1-120-2C-W-8DSM+82C
622
Example 3
16’
8’ fixture with a Day
Specify: L6A75-30
Example 4
16’
8’ fixture with a Day
Specify: L6A75-30
311
Indicates sensor location
Example 1
4DSM
4’ each
Must add 3/8” for
4’ individual
endcap or 3/4” to the
overall fixture with a Daylight Sensor. Specify: L6A100-30HO-4’-AC48G1-120-1C-W-4DSM
244
3/8”
48”
4’
length of the row.
Example 2
8DSS
8’
Test #: ITL82963
96”
Part #: L6A100-40HO-4
8’
Lumens
per watt: 76
Total Delivered Lumens: 3,086Dual Aircraft Cable
8’ individual fixture wired Test
to a DSM
fixture. Specify: L6A100-30HO-8’-AC48G1-120-1C-W-8DSS
#: ITL82959
Test #: ITL82961
Part #: L6A35-40HO-4
Part #: L6A75-40HO-4
Example 3
8DSM per watt: 84
8DSS
Lumens
Lumens per watt: 88
16’
Total
Delivered
3,957
Total Single
DeliveredAircraft
Lumens:Cable
3,584
8’ fixture with a Daylight Sensor
and Aircraft
8’ fixtureLumens:
wired
to DSM
fixture Single Aircraft Cable
Dual
Cable
(AC)
(DAC) optical design.
*Linero 6 photometry show due to equivalant
INDIVIDUAL MODULES
Linero Curved 6 Components
1073
805
537
4’
Single Aircraft
Cable
8DSS
(AC)
LC6A100
977
1-1/4”
(31.8mm) 733
48” (1219.2mm)
Specify: L6A100-30HO-16’-AC48G1-120-1C-W-8DSM+8DSS
(DAC)
Must add 1-1/4” (31.8mm)
for each endcap or 2-1/2”
244 (63.5mm) to the overall
length of the row.
Example 1
488
268
96” (2438.4mm)
8’
Test #: ITL82963
Part #: LC6A100-40HO-4
Lumens per watt: 76
Dual Aircraft Cable
Total Delivered Lumens: 3,086
(DAC)
Test #: ITL82961
Part #: LC6A75-40HO-4
Lumens
per watt:
88 Cable
Single
Aircraft
Total Delivered (AC)
Lumens: 3,584
DAYLIGHT
Linero 8 SENSOR
Components
(AC)
Example 4
8DSM
82C
16’
MOUNTING
OPTIONS
8’ fixture with a Daylight Sensor + 8’ fixture wired as standard dual circuit (not wired to the sensor)
Specify: L6A100-30HO-16’-AC48G1-120-2C-W-8DSM+82C
1243
932
622
311
Indicates sensor location
4DSM
4’ individual fixture with a Daylight Sensor. Specify: LC6A35-30HO-4’-AC48G1-120-1C-W-4DSM
Example 1
4DS
4’
4’ individual fixtu
Example 2
8DSS
8’
8’ individual fixture wired
DSM fixture. Specify: LC6A35-30HO-8’-AC48G1-120-1C-W-8DSS
Test to
#: aITL82959
Example 2
8’
8’ individual fixtu
4’
Part #: LC6A35-40HO-4
Example 3
Lumens
per
watt: 84
8DSM
8DSS
Single Aircraft
16’
Dual
Aircraft
Cable
TotalSensor
Delivered
Lumens:
3,957
8’ fixture with a Daylight
and
8’
fixture
wired
to
DSM
fixture
(AC)
(DAC)
Specify: LC6A35-30HO-16’-AC48G1-120-1C-W-8DSM+8DSS
Cable
ORDERING
Example 4 INFORMATION: Specify row layout in the Options section of the
part16’number when ordering
8DSMDaylight Sensor. Daylight Sensor
82C Master (DSM)
APPLICATION: Daylight sensors are an ideal solution for
includes
the fixture
withSensor
sensor
driver.
DSS
units.
Daylight
Sensor
8’ fixture
with a Daylight
+ 8’and
fixture
wired asControls
standard dual
circuit
(not wired
to the sensor)
saving energy , creating smart environments and aiding
Satellite
(DSS)
includes the fixture with a sensor compatible driver only. Must
Specify:
LC6A35-30HO-16’-AC48G1-120-2C-W-8DSM+82C
sustainability. Pinnacle Lighting’s daylight
be used in conjunction with a DSM unit. See example 4 for information on
48”
sensor is a turn key3/8”
solution forMust
lightadd 3/8” for each
ordering rows with both standard circuiting and daylight sensor.
ing control. The sensor is easilyendcap
wired or 3/4”
to the
4’
to the 0-10 volt driver installedoverall
in thelength ofExample
Indicates sensor location
the row.1
Indicates
fixture. sensor location
4’
4DSM
4’
DAYLIGHT SENSOR:
Daylight
4’ individual fixture with a Daylight Sensor. Specify: LC6A100-30HO-4’-AC48G1-120-1C-W-4DSM
96”
sensor dims lights based on electric light and
L88’Shown
Example 2
presence of daylight. Sensor can control up to 5 drivers. Sensor
8DSS
8’
8’ is factory calibrated to 45 footcandles (fc), adjustable by 1/3 to 3 times the
Linero 6, 90° Corner (CL)
8’ individual fixture wired to a DSM fixture. Specify: LC6A100-30HO-8’-AC48G1-120-1C-W-8DSS
default setting by rotating the aperture.
Example
3
STANDARD SENSOR PLACEMENT: The sensor location in Linero fixtures allows
144”
8DSM
8DSS
16’
for easy placement of the sensor in relation to the space being daylighted. Housings
1-7/8”
8’ fixture with a Daylight Sensor and 8’ fixture wired to DSM fixture
can be rotated for more flexibility.
12’
Specify: LC6A100-30HO-16’-AC48G1-120-1C-W-8DSM+8DSS
8-7/16”
Indicates sensor location
4’
8’
Example 4
8DSM
82C
16’
8’ fixture with a Daylight Sensor + 8’ fixture wired as standard dual circuit (not wired to the sensor)
Specify: LC6A100-30HO-16’-AC48G1-120-2C-W-8DSM+82C
CORNERS
4’
Linero Curved 6, 90° Corner (CL)
Indicates sensor location
8’
1-7/8”
12’
8-3/4”
ORDERING INFORMATION: Specify corners in the options section of the
part #. Sample Catalog #: LC6A100-35HO-24-AC48G1-120-1C-W-CL.
®
Linero 8, 90° Corner (CL)
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
1-7/8”
Phone 303.322.5570
Fax 303.322.5568
www.pinnacle-ltg.com
© 2015 Pinnacle Architectural Lighting®
October 2015
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic10-1/16”
versions.
Example 3
16’
8’ fixture with a D
Specify: LC6A75
Example 4
16’
8’ fixture with a D
Specify: LC6A75