CONTROL
GE Industrial Systems
NEW!
Catalog
More choices than ever!
GE Definite Purpose Controls
• Contactors 20A-150A
• Starters 25A-60A
• 2-Speed Controllers 25A-90A
GE Definite Purpose Controls
Check out these useful DP-related tools on the web!
Find out how GE’s new DP contactors can save you time and money while increasing your productivity!
http://www.geindustrial.com/cwc/products?id=c-dp&type=Product+Information
Configure a DP contactor, starter or 2-speed controller for your specific application.
Contactor: http://www.GEindustrial.com/industrialsystems/wizards/dpcontactor/home.htm
Starter: http://www.GEindustrial.com/industrialsystems/wizards/dpstarter/home.htm
2-speed Controller: http://www.GEindustrial.com/industrialsystems/wizards/dpcontroller/home.htm
Find the CR453 equivalent of a competitive catalog number (either directly through this address
or through EliteNet). http://catalog.GEindustrial.com/xref.jsp
GE Industrial Systems
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Standard Forms
DP Contactors, 1-3 poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
DP Contactors, 4 poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
DP Starters & 2-Speed Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Factory Modified Forms
DP Contactors, 1-3 poles
CR453C, 20A-40A, Compact 1 & 2 poles . . . . . . . . . . . . . . . . . . . .12
CR453A, 25A-40A, 2 & 3 poles . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
CR353, 50A-90A, 2 & 3 poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
CR353, 120A-150A, 2 & 3 poles . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
DP Contactors, 4 poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
DP Starters & 2-Speed Controllers
CR454, 25A-40A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
CR354F, 50A-60A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
CR455, 25A-40A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Field Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Heater Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Outline Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Bulk Pack Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
www.GEindustrial.com
1
GE’s definite purpose controls deliver definite advantages
Introduction
CR453C Compact
20A-40A, 1-pole, 1-pole + shunt & 2-pole
Multiple terminal configurations on line
and load terminals allow selection of the
right terminals for the job. Choose from hex
head screw terminals with slotted/Phillips
head or box lug terminals, all with or without quick connect accessory terminals.
Cover (standard on 40A, optional
on 25A-30A) offers increased
protection from contaminants.
Wide array of coil voltages
and frequencies allows the
compact DP contactors to be
adapted to a wide array of
applications.
Large silver alloy contacts offer
superior life and resistance to
welding.
Low VA “no burn” coil design allows minimum
CPT requirement and failsafe reliability during
brownout conditions. Features standard 1/4”
dual quick connect angled terminals for ease
of wiring. Coils are tape wrapped for superior
durability and protection from damage.
Universal mounting plate with
multiple elongated holes allows the
compact contactors to be used with
the same mounting holes as existing
designs – allowing easy replacement
or simple substitution.
Outstanding performance meets all pertinent
standards: UL Component Recognized, CSA, CE and
ARI 780 – insuring long service life and suitability in the
application. All ratings meet 6x, 5x, 4x locked rotor
amp rating at 240, 480 and 600V respectively.
2
Tested for endurance per ARI 780, all contactors meet
or exceed for 500,000 mechanical and 200,000
electrical operations.
www.GEindustrial.com
CR453A
2-pole & 3-pole, 25A-40A
Cover permits visual on/off status indication.
Short covers are standard for contactors with
all screw terminals. Other contactors feature
a standard long cover.
Toolless, snap on
accessories make
factory and field
modifications simple
and easy while delivering time savings and
late point flexibility.
The use of advanced thermoplastics increases
contactor performance, allows better appearance,
enhances the overall quality and improves the
clarity of the terminal markings.
Multiple terminal configurations on line and load terminals
allow selection of the right terminals for the job. Choose from
hex head screw terminals with slotted/Phillips head or box lug
terminals, all with or without quick connect accessory terminals.
Quick connects are integral to the terminal to provide
strength and reliability. Silver alloy contacts are strip
welded for a superior bond, resulting in long life and
weld resistance.
Coils can be replaced without tools and
are enclosed for protection from outside
contaminants. Their reversible design
permits top or bottom wiring without
inverting the contactor.
Contactor components form a pokayoke assembly.
They are keyed so that it is impossible to put
them together incorrectly. This makes for easy,
foolproof assembly.
Introduction
New contactors are 20% smaller
but still deliver 100% of the
performance and quality.
Class 20 and
Class 10 overloads
are available.
Low VA “no burn” coil design allows minimum
CPT sizing requirement and failsafe reliability
during brownout conditions. Features standard
slotted/Phillips screw with 1/4” dual quick
connect terminals for ease of wiring.
Universal mounting plate
with multiple elongated holes
allow contactors to be used in
same mounting holes as
existing designs – allowing
easy replacement or simple
substitution. DIN rail
mount is available.
Outstanding performance meets all pertinent standards: UL
Component Recognized, CSA, CE and ARI 780 – insuring long
service life and suitability in the application. All ratings meet 6x, 5x,
4x locked rotor amp rating at 240, 480 and 600V respectively.
Tested for endurance per ARI 780, all contactors meet or exceed
500,000 mechanical and 200,000 electrical operations.
www.GEindustrial.com
3
Definite Purpose Contactors, 1-3 poles
Standard Forms
On standard CR453C contactors, the coil and each power pole are supplied with two 1/4” quick connect terminals.
Standard 20-35FLA contactors feature hex screws with #2 Phillips/slotted heads. Standard 40FLA contactors come
with box lugs.
CR453C Compact, 20A-40A, 1-pole, 1-pole plus shunted pole & 2-pole
Standard Forms
DP Contactors, 1-3 poles
Full Load Resistive Locked Rotor Amps, Single Phase, 50/60 Hz
Amps Amps Per Pole 240/277V
480V
600V
20
30
120
100
80
25
35
150
125
100
30
40
180
150
120
35
50
180
150
120
210
240
175
200
140
160
40
50
Poles
1
1 + Shunt
2
1
1 + Shunt
2
1
1 + Shunt
2
1
1 + Shunt
2➀
2➀
➀ Ratings shown are for 1-phase, 2-pole. See page 24 for 1-phase, 1-pole ratings.
CR453C Compact Coil Selection (Replace
Coil Voltage
60 Hz
50 Hz
24
110-120
208-240
277
24
110
208-220
–
Catalog Number
Digit
List Price,
GO-10DP
Catalog Number
*AA
*AA
*AA
*AA
*AA
AA
*AA
*AA
*AA
*AA
*AA
*AA
*
*BB
CR453CA1
CR453CA3
CR453CA2
CR453CB1
CR453CB3
CR453CB2
CR453CC1
CR453CC3
CR453CC2
CR453CD1
CR453CD3
CR453CD2
CR453CE2
$24.00
29.00
32.00
30.00
36.00
40.00
32.00
38.00
42.00
35.00
44.00
46.00
57.00
* in catalog number with appropriate coil digit)
H
A
B
F
Factory Modified Forms
Field Installation Kits
Technical Data
Outline Drawings
4
p. 12
p. 24
p. 27
p. 30
www.GEindustrial.com
On standard CR453A contactors, the coil and each power pole are supplied with two 1/4” quick connect terminals.
Standard 25FLA and 30FLA contactors feature hex screws with #2 Phillips/slotted heads and short covers.
Standard 40FLA contactors come with box lugs and long covers.
CR453A, 25A-40A, 2-pole & 3-pole
Single Phase
HP, 50/60 Hz
Resistive
Amps
Per Pole
HP
LRA
HP
LRA
HP
LRA
120V
240V
25
35
7.5
150
10
125
10
100
2
3
30
40
10
180
15
150
15
120
2
5
40
50
10
240
20
200
20
160
3
7.5
240V
CR453A Coil Selection (Replace
Coil Voltage
60 Hz
50 Hz
12
24
110-120
208-240
277
440-480
550-600
12
24
110-120
208-240
–
380-415
550-600
Catalog Number
Digit
E
H
A
B
F
C
D
480V
600V
Poles
2
3
2
3
2
3
Catalog Number
*AA
AA
*AA
*AA
*BB
*BB
*
CR453AB2
CR453AB3
CR453AC2
CR453AC3
CR453AD2
CR453AD3
* in catalog number with appropriate coil digit)
List Price,
GO-10DP
$47.00
53.00
53.00
59.00
64.00
71.00
Standard Forms
DP Contactors, 1-3 poles
25A-30A
with screw terminals
and short cover
Three Phase, 50/60 Hz
Full
Load
Amps
40A
with box lugs
and long cover
Factory Modified Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 14
p. 24
p. 27
p. 30
www.GEindustrial.com
5
Definite Purpose Contactors, 1-3 poles
Standard CR353 contactors in the 50-120FLA ratings are supplied with box lug terminals. Power poles in the 50-90FLA
size are supplied with two 1/4” quick connect terminals. Contactors in the 120-150FLA size include control power
accessory screws on L1 and L2. Coils are provided with screw connections with a single 1/4” quick connect
terminal on the 50 and 60FLA size and two 1/4” quick connect terminals on the 75 and 90 amp size.
CR353, 50-150A 2-pole & 3-pole
Standard Forms
DP Contactors, 1-3 poles
Full Load Resistive
Amps Amps Per Pole
Locked Rotor Amps, Three Phase, 50/60 Hz
240V
480V
600V
50
62
300
250
200
60
75
360
300
240
75
90
450
375
300
90
90
540
450
360
120
120
720
600
480
150
150
900
750
600
CR353F, E, G Coil Selection (Replace
AC Coils
CR353F, E Coil Voltage
60 Hz
50 Hz
CR353G Coil Voltage
60 Hz
50 Hz
24
110-120
208-240
277
460-480
575-600
–
115-120
230-240
277
460-480
575-600
24
110-120
208-240
–
440
550
–
110
220
–
440
550
Poles
2
3
2
3
2
3
2
3
2
3
2
3
List Price,
GO-10DP
Catalog Number
*11
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*
CR353FE2B
CR353FE3B
CR353FF2B
CR353FF3B
CR353EG2B
CR353EG3B
CR353EH2B
CR353EH3B
CR353GJ2A
CR353GJ3A
CR353GK2A
CR353GK3A
$121.00
134.00
141.00
157.00
203.00
225.00
290.00
322.00
423.00
460.00
816.00
900.00
* in catalog number with appropriate coil digit)
DC Coils
Catalog Number
Digit
H
A
B
F
C
D
CR353F
CR353E Catalog Number List Price Adder,
Coil Voltage Coil Voltage
Digit
GO-10DP
12
24-28
110-125
–
12
24-28
110-125
48
P
R
S
T
$36.00
36.00
36.00
36.00
Factory Modified Forms
Field Installation Kits
Technical Data
Outline Drawings
6
p. 14
p. 24
p. 27
p. 30
www.GEindustrial.com
Definite Purpose Contactors, 4 poles
Standard Forms
CR353, 25-40A 4-pole
25
30
40
Resistive Locked Rotor Amps, Three Phase, 50/60 Hz
Per Pole
240V
480V
600V
35
40
50
150
180
240
CR353A Coil Selection (Replace
AC Coils
125
150
200
100
120
160
Poles
Catalog Number
4
4
4
CR353AB4A 1
CR353AC4A 1
CR353AD4B 1
*
*
*
List Price,
GO-10DP
$71.00
77.00
95.00
* in catalog number with appropriate coil digit)
DC Coils
Coil Voltage
60 Hz
50 Hz
Catalog Number
Digit
24
110-120
208-240
277
415-480
575-600
24
110-120
208-240
–
415-480
550
H
A
B
F
C
D
Factory Modified Forms
Field Installation Kits
Technical Data
Outline Drawings
Voltage Catalog Number List Price Adder,
DC
Digit
GO-10DP
12
24-28
125
P
R
S
$36.00
36.00
36.00
Standard Forms
DP Contactors, 4 poles
Full Load
Amps
p. 18
p. 24
p. 27
p. 30
www.GEindustrial.com
7
Definite Purpose Starters
Standard Forms
Standard CR454A starters consist of contactors and overload relays (for starters with holding interlocks, see factory
modified forms on page 19). The coil and each power pole are supplied with two 1/4” quick connect terminals.
Standard 25FLA and 30FLA starters feature hex screws with #2 Phillips/slotted heads and short covers. Standard
40FLA starters come with box lugs and long covers.
CR454, 25-40A, 3-pole
Three Phase, 50/60 Hz
Single Phase
HP ➀
Full
Load
Amps
Resistive
Per Pole
HP
LRA
HP
LRA
HP
LRA
115V
230V
Poles
Catalog Number
25
30
40
35
40
50
7.5
10
10
150
180
240
10
15
20
125
150
200
10
15
20
100
120
160
2
2
3
3
5
7.5
3
3
3
CR454AB3 A#
CR454AC3 A#
CR454AD3 B#
240V
480V
600V
➀ For single-phase starters, wire 2 poles in series.
25A-30A
with screw terminals
and short cover
$78.00
84.00
96.00
CR454 Coil Selection (Replace in
catalog number with appropriate coil digit)
*
Coil Voltage
40A
with box lugs
and long cover
*
*
*
List Price,
GO-10DPA
60 Hz
50 Hz
Catalog Number
Digit
12
24
110-120
208-240
277
440-480
550-600
12
24
110-120
208-240
–
380-415
550-600
E
H
A
B
F
C
D
Overload Selection (Replace # in catalog number with appropriate overload
digit). Select range corresponding to full load amps. Overloads are Class 20,
ambient compensated. For starters with lower overload amp ranges, see page 19.
Standard Forms
DP Starters & 2-Speed Controllers
Overload Amp Catalog Number List Price Adder, Overload Amp Catalog Number List Price Adder,
Range
Digit
GO-10DPA
Range
Digit
GO-10DPA
8
2.5-4.1
4-6.3
5.5-8.5
8-12
10-16
K
L
M
N
P
$55.00
55.00
57.00
57.00
57.00
14.5-18
17.5-22
21-26
25-32
30-40
S
T
U
V
W
$57.00
57.00
57.00
63.00
78.00
Factory Modified Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 19
p. 24
p. 27
p. 30
www.GEindustrial.com
CR354, 50A-60A, 2-pole & 3-pole
Locked Rotor Amps
240V
50
300
60
360
480V
250
300
600V
Phase
Poles
Overload
Heaters
1
2
1
3
3
3
1
2
1
3
3
3
200
240
➀ For heater selection, see page 29.
CR354 Coil Selection (Replace
Coil Voltage
50 Hz
Catalog Number
Digit
24
110-120
208-240
277
415-480
575-600
24
110-120
208-240
–
415-480
550
H
A
B
F
C
D
p. 19
p. 24
p. 27
p. 29
p. 30
www.GEindustrial.com
—
1
—
1
—
1
—
1
Standard Overload➀
3
*3B
*3
*3B
*3
*
*3B
3
*3B
*
CR354FE2B
CR354FE2B
CR354FE3B
CR354FE3B
CR354FF2B
CR354FF2B
CR354FF3B
CR354FF3B
List Price,
GO-10DPA
$242.00
254.00
336.00
348.00
282.00
294.00
393.00
405.00
Ambient
Compensated
Overload➀
4
*4B
*4
*4B
*4
*
*4B
4
*4B
*
CR354FE2B
CR354FE2B
CR354FE3B
CR354FE3B
CR354FF2B
CR354FF2B
CR354FF3B
CR354FF3B
List Price,
GO-10DPA
$258.00
270.00
352.00
364.00
298.00
310.00
409.00
421.00
* in catalog number with appropriate coil digit)
60 Hz
Factory Modified Forms
Field Installation Kits
Technical Data
Heaters
Outline Drawings
NO Aux.
Contact
(10A,
250Vac)
Standard Forms
DP Starters & 2-Speed Controllers
Full
Load
Amps
9
Definite Purpose 2-Speed Controllers
Standard Forms
Standard CR455A 2-speed controllers consist of two contactors, a mechanical interlock and partially wired crosselectrical interlocks. The coil and each power pole are supplied with two 1/4” quick connect terminals. Standard
25FLA and 30FLA 2-speed controllers feature hex screws with #2 Phillips/slotted heads and short covers. Standard
40FLA 2-speed controllers come with box lugs and long covers.
CR455, 25-40A, 2-pole & 3-pole
25A-30A
with screw terminals
and short covers
Three Phase, 50/60 Hz
HP
LRA
HP
LRA
HP
LRA
120V
240V
25
7.5
150
10
125
10
100
2
3
30
10
180
15
150
15
120
2
5
40
10
240
20
200
20
160
3
7.5
240V
480V
600V
CR455 Coil Selection (Replace
Coil Voltage
Standard Forms
DP Starters & 2-Speed Controllers
40A
with box lugs
and long covers
10
Single Phase
HP, 50/60Hz
Full
Load
Amps
Poles
2-3
3-3
2-3
3-3
2-3
3-3
Catalog Number
*AAD
AAD
*AAD
*AAD
*BBD
*BBD
*
CR455AB2
CR455AB3
CR455AC2
CR455AC3
CR455AD2
CR455AD3
List Price,
GO-10DPA
$190.00
202.00
202.00
214.00
225.00
239.00
* in catalog number with appropriate coil digit)
60 Hz
50 Hz
Catalog Number
Digit
12
24
110-120
208-240
277
440-480
550-600
12
24
110-120
208-240
–
380-415
550-600
E
H
A
B
F
C
D
Factory Modified Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 20
p. 24
p. 27
p. 30
www.GEindustrial.com
CR355 Two-Speed Controllers, 25A-40A, 4-4 & 5-3 pole
CR355 Coil Selection (Replace
Coil Voltage
Locked Rotor Amps
Full Load
Amps
240V
480V
600V
25
150
125
100
30
180
150
120
40
240
200
160
Poles
4-4
5-3
4-4
5-3
4-4
5-3
Catalog
N umber
*1B
1B
*1B
*1B
*1B
*1B
*
CR355AB4A
CR355AB5A
CR355AC4A
CR355AC5A
CR355AD4B
CR355AD5B
List Price,
GO-10DPA
$232.00
232.00
245.00
245.00
279.00
279.00
* in catalog number with appropriate coil digit)
60 Hz
50 Hz
Catalog Number
Digit
24
110-120
208-240
24
110-120
208-240
H
A
B
CR355 Two-Speed Controllers, 50A-90A
240V
480V
600V
50
300
250
200
60
360
300
240
75
450
375
300
90
540
450
360
* in catalog number with appropriate coil digit)
CR355EE, EF Coil Voltage CR355EG, EH Coil Voltage Catalog Number
60 Hz
50 Hz
60 Hz
50 Hz
Digit
24
110-120
208-240
24
110-120
208-240
Field Installation Kits
Technical Data
Outline Drawings
24
110-120
208-240
p. 24
p. 27
p. 30
www.GEindustrial.com
24
110-120
208-240
H
A
B
Poles
2-3
3-3
2-3
3-3
2-3
3-3
2-3
3-3
Catalog Number
*1C
1C
*1C
*1C
* 1C
*1C
*1C
*1C
*
CR355EE2B
CR355EE3B
CR355EF2B
CR355EF3B
CR355EG2B
CR355EG3B
CR355EH2B
CR355EH3B
List Price,
GO-10DPA
$295.00
309.00
338.00
354.00
467.00
490.00
652.00
684.00
Standard Forms
DP Starters & 2-Speed Controllers
CR355 Coil Selection (Replace
Locked Rotor Amps
Full Load
Amps
11
Definite Purpose Contactors, 1-3 poles
Factory Modified Forms
DP Contactors, 1-3 poles
Factory Modified Forms
CR453C Definite Purpose Contactors, 20A-40A, 1-pole & 2-pole Compact Design
Select contactor from the main table and complete the
catalog number by inserting the digits corresponding
to required and optional specifications from the tables
below. All factory modified forms require a minimum order
of 200 and additional multiples of 20. See page 37 for
bulk pack details.
1-pole & 1-pole plus shunted pole
Locked Rotor Amps
(1 Phase - Per Pole)
Full
Load
Amps
Resistive
Amps
Per Pole
240V/
277V
480V
600V
20
30
120
100
80
25
35
150
125
100
30
40
180
150
120
35
50
180
150
120
Catalog Number
(Complete by adding digits from tables below*)
Required Digits
Poles
1
2
3
4
5
6
7
8
1
1 + Shunt
1
1 + Shunt
1
1 + Shunt
1
1 + Shunt
C
C
C
C
C
C
C
C
R
R
R
R
R
R
R
R
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
3
3
3
3
3
3
3
3
C
C
C
C
C
C
C
C
A
A
B
B
C
C
D
D
1
3
1
3
1
3
1
3
Options
9
10
11
12
13
14
List Price,
GO-10DP
$24.00
29.00
30.00
36.00
32.00
38.00
35.00
44.00
*If no options are required, catalog number is complete after 11 digits.
2-pole
Locked Rotor Amps
(1 Phase - 2 Pole) / (1 Phase - Per Pole)
Catalog Number
(Complete by adding digits from tables below*)
Full
Load
Amps
Resistive
Amps
Per Pole
240V/
277V
480V
600V
1
2
3
4
5
6
7
8
20
25
30
35
40
30
35
40
50
50
120/120
150/150
180/180
210/180
240/180
100/100
125/125
150/150
175/150
200/150
80/80
100/100
120/120
140/120
160/120
C
C
C
C
C
R
R
R
R
R
4
4
4
4
4
5
5
5
5
5
3
3
3
3
3
C
C
C
C
C
A
B
C
D
E
2
2
2
2
2
Required Digits
Options
9
10
11
12
13
14
List Price,
GO-10DP
$32.00
40.00
42.00
46.00
51.00
*If no options are required, catalog number is complete after 11 digits.
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
12
p. 4
p. 24
p. 27
p. 30
www.GEindustrial.com
See page 37 for bulk pack details.
Digit 9 Coil Selection
Coil Voltage
Digit 10 Line Terminals
60 Hz
50 Hz
Catalog Number
Digit 9
24
110-120
208-240
277
24
110
208-220
–
H
A
B
F
List Price Adder, GO-10DP
1-pole
1-pole + shunt, 2-pole
Catalog Number
Digit 10
Terminal Type
A
Screw w/ 1/4” Quick Connect
B
Lug w/ 1/4” Quick Connect
$0.00
1.50
$0.00
3.00
C
Screw without Quick Connect terminals
0.00
0.00
D
Lug without Quick Connect terminals
1.50
3.00
L
Sems Clamp w/ 1/4” Quick Connect
1.00
2.00
M
Sems Clamp
1.00
2.00
Factory Modified Forms
DP Contactors, 1-3 poles
Note: All factory modified forms require a minimum order of 200 and additional multiples of 20.
Digit 11 Load Terminals
Catalog Number
Digit 11
Terminal Type
List Price Adder, GO-10DP
1-pole
1-pole + shunt, 2-pole
A
Screw w/ 1/4” Quick Connect
$0.00
$0.00
B
Lug w/ 1/4” Quick Connect
1.50
3.00
C
Screw without Quick Connect terminals
0.00
0.00
D
Lug without Quick Connect terminals
1.50
3.00
L
Sems Clamp w/ 1/4” Quick Connect
1.00
2.00
M
Sems Clamp
1.00
2.00
Digit 12 Cover
Catalog Number Digit 12 Cover option
A*
C
Standard (cover on 40FLA is standard)
Add cover to 20-35FLA
List Price Adder, GO-10DP
$0.00
2.00
Digit 13 Nameplate Marking
For special nameplate markings, contact factory.
Catalog Number Digit 13 Nameplate Marking
A*
Standard (cover on 40FLA is standard)
List Price Adder, GO-10DP
$0.00
Digit 14 Packaging
Catalog Number Digit 14 Cover option
Blank
Single Pack
Bulk Pack (available in multiples of 200;
P
contact factory for delivery schedules;
see page 37 for bulk pack details)
List Price Adder, GO-10DP
$0.00
0.00
* If this will be the final digit in your selection, omit from catalog number.
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 4
p. 24
p. 27
p. 30
www.GEindustrial.com
13
Definite Purpose Contactors, 1-3 poles
Factory Modified Forms
DP Contactors, 1-3 poles
Factory Modified Forms
CR453A Definite Purpose Contactors, 25A-40A, 2-pole & 3-pole
Select contactor from the main table and complete the catalog number
by inserting the digits corresponding to required and optional specifications from the tables below. Factory modified forms require minimum
orders/additional multiples. See page 37 for bulk pack details.
Unless otherwise modified in Digit 15, contactors
with line and load screw terminals will be supplied
with short covers, and all others will be supplied
with long covers.
Three Phase, 50/60 Hz
Full Resistive
240V
Load Amps
Amps Per Pole HP LRA
480V
Catalog Number
(Complete by adding digits from tables below*)
Single Phase
HP, 50/60 Hz
600V
HP
LRA
HP
LRA
120V
240V
25
35
7.5
150
10
125
10
100
2
3
30
40
10
180
15
150
15
120
2
5
40
50
10
240
20
200
20
160
3
7.5
Required Digits
Poles
1
2
3
4
5
6
7
8
Options
List Price,
9 10 11 12 13 14 15 16 17 GO-10DP
2
C R 4 5 3 A B 2
$47.00
3
C R 4 5 3 A B 3
53.00
2
C R 4 5 3 A C 2
53.00
3
C R 4 5 3 A C 3
59.00
2
C R 4 5 3 A D 2
61.00
3
C R 4 5 3 A D 3
66.50
*If no options are required, catalog number is complete after 11 digits.
Digit 9 Coil Selection
Coil Voltage
Digit 10 Line Terminals
60 Hz
50 Hz
Catalog Number
Digit 9
12
24
110-120
208-240
277
440-480
550-600
12
24
110-120
208-240
–
380-415
550-600
E
H
A
B
F
C
D
List Price Adder, GO-10DP
Catalog Number
Digit 10
Terminal Type
A
B
C
D
L
M
2-pole, 2-pole 3-pole 3-pole
25-30FLA 40FLA 25-30FLA 40FLA
Screw w/ 1/4” Quick Connect
Lug w/ 1/4” Quick Connect
Screw without Quick Connect terminals
Lug without Quick Connect terminals
Sems Clamp w/ 1/4” Quick Connect
Sems Clamp
$0.00
1.50
0.00
1.50
2.50
2.00
$1.50
1.50
1.50
1.50
2.50
2.00
$0.00
2.25
0.00
2.25
3.75
3.00
$2.25
2.25
2.25
2.25
3.75
3.00
Digit 11 Load Terminals
List Price Adder, GO-10DP
Catalog Number
Digit 11
A
B
C
D
L
M
14
Terminal Type
Screw w/ 1/4” Quick Connect
Lug w/ 1/4” Quick Connect
Screw without Quick Connect terminals
Lug without Quick Connect terminals
Sems Clamp w/ 1/4” Quick Connect
Sems Clamp
2-pole, 2-pole 3-pole 3-pole
25-30FLA 40FLA 25-30FLA 40FLA
$0.00
1.50
0.00
1.50
2.50
2.00
$1.50
1.50
1.50
1.50
2.50
2.00
$0.00
2.25
0.00
2.25
3.75
3.00
$2.25
2.25
2.25
2.25
3.75
3.00
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 5
p. 24
p. 27
p. 30
www.GEindustrial.com
See page 37 for bulk pack details.
Digit 12 Terminal Identification
Catalog Number
Digit 12
Special Mark
Digit 15 Modifications
List Price Adder,
GO-10DP
Top: L1, L2, L3
Bottom: T1, T2, T3
Top: T1, T2, T3
Inverse
Bottom: L1, L2, L3
Top: L3, L2, L1
Reverse
Bottom: T3, T2, T1
No markings
A*
Standard
B
C
D
$0.00
1.00
1.00
1.00
Catalog Number
Digit 15
Modification
A*
B
C
D
G
J
K
None
Coil rotated (terminals on loadside)
DIN rail clip option
No cover (not available on
box lug forms)
Coil rotated & DIN rail clip option
Long cover on screw terminal forms
Short cover on Sems clamp forms
List Price Adder,
GO-10DP
$0.00
2.00
7.00
Factory Modified Forms
DP Contactors, 1-3 poles
Factory modified forms require minimum orders/additional multiples.
0.00
9.00
2.00
1.00
Digits 13 & 14 Auxiliary Contacts
Volts
Catalog Number
Digits 13 & 14 Contacts
250
600
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
List Price Adder,
GO-10DP
00*
1L
1R
2L
None (standard)
1 SPDT Left
1 SPDT Right
2 SPDT Left
$0.00
16.00
16.00
30.00
2R
2S
4S
10
01
11
12
20
02
22
21
2 SPDT Right
1 SPDT Left & Right
2 SPDT Left & Right
1 NO-NC Left
1 NO-NC Right
1 NO-NC Left & Right
1 N0-NC Left, 2 NO Right
2 NO Left
2 NO Right
2 NO Left & Right
2 NO Left, 1 NO-NC Right
30.00
32.00
60.00
40.00
40.00
80.00
80.00
40.00
40.00
80.00
80.00
p. 5
p. 24
p. 27
p. 30
www.GEindustrial.com
Digit 16 Nameplate Marking
For special nameplate markings, contact factory.
Catalog Number
Digit 16
A*
Specials
None (standard)
List Price Adder,
GO-10DP
$0.00
Digit 17 Packaging
Catalog Number
Digit 17
Blank
P
Specials
Single
Bulk pack (requires minimum
order quantities; see page 37
for details)
List Price Adder,
GO-10DP
$0.00
0.00
* If this will be the final digit(s) in your selection, omit from catalog number.
15
Definite Purpose Contactors, 1-3 poles
Factory Modified Forms
Factory Modified Forms
DP Contactors, 1-3 poles
CR353 Definite Purpose Contactors, 50A-90A, 2-pole & 3-pole
Select contactor from the main table and complete the catalog number by inserting the digits
corresponding to required and optional specifications from the tables below. Note: minimum
order quantities apply to all factory modified forms. Contact factory for details.
Catalog Number
(Complete by adding digits from tables below*)
Locked Rotor Amps,
Three Phase, 50/60 Hz
Full
Load
Amps
Resistive
Amps
Per Pole
240V
480V
600V
50
62
300
250
200
60
75
360
300
240
75
90
450
375
300
90
90
540
450
360
Required Digits
Options
Poles
1
2
3
4
5
6
7
8
2
3
2
3
2
3
2
3
C
C
C
C
C
C
C
C
R
R
R
R
R
R
R
R
3
3
3
3
3
3
3
3
5
5
5
5
5
5
5
5
3
3
3
3
3
3
3
3
F
F
F
F
E
E
E
E
E
E
F
F
G
G
H
H
2
3
2
3
2
3
2
3
9
10
11
12
13
List Price,
GO-10DP
$121.00
134.00
141.00
157.00
203.00
225.00
290.00
322.00
*If no options are required, catalog number is complete after 10 digits.
Digit 9 Line and Load Terminals
Digit 11 Terminal Markings
Catalog Number Digit 9
A
B
C
D
Catalog Number
Digit 11
Terminal Markings
0*
No terminal markings
Line (L) at top, Load (T) at bottom
1
(Standard)
Load (T) at top, Line (L) at bottom
2
(Inverted)
Terminal Type
List Price Adder, GO-10DP
Screw w/ Quick Connect
$0.00
Box Lug w/ Quick Connect (standard)
0.00
Screw
0.00
Lug
0.00
Digit 10 Coil Selection
AC Coils
Coil Voltage
60 Hz
50 Hz
24
110-120
208-240
277
460-480
575-600
24
110-120
208-240
–
440
550
List Price Adder,
GO-10DP
$1.00
0.00
1.00
Digit 12 Auxiliary Contacts
Catalog Number
Digit 10
Catalog Number
Digit 12
A*
B
C
D➁
H
A
B
F
C
D
Auxiliary Contacts
None (standard)
10FLA, 250Vac SPDT on left side
10FLA, 250Vac, SPDT left & right
10FLA, 600Vac, 1NO-1NC on left side
List Price Adder,
GO-10DP
$0.00
16.00
32.00
36.00
➁ Not available on CR353F
Digit 13 Nameplate Markings
DC Coils
For special nameplate markings, contact factory.
CR353F
CR353E Catalog Number List Price Adder,
Coil Voltage Coil Voltage
Digit 10
GO-10DP
Catalog Number
Digit 13
Blank
–
24-28
–
–
12
24-28
115
48
P
R
S
T
$36.00
36.00
36.00
36.00
* If this will be the final digit(s) in your selection, omit from catalog number.
16
Specials
None (standard)
List Price Adder,
GO-10DP
$0.00
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 6
p. 24
p. 27
p. 30
www.GEindustrial.com
Select contactor from the main table and complete the catalog number by inserting the digits
corresponding to required and optional specifications from the tables below. Note: minimum
order quantities apply to all factory modified forms. Contact factory for details.
Catalog Number
(Complete by adding digits from tables below*)
Locked Rotor Amps,
Three Phase, 50/60 Hz
Full
Load
Amps
Resistive
Amps
Per Pole
240V
480V
600V
120
120
720
600
480
150
150
900
750
600
Required Digits
Options
Poles
1
2
3
4
5
6
7
8
9
2
3
2
3
C
C
C
C
R
R
R
R
3
3
3
3
5
5
5
5
3
3
3
3
G
G
G
G
J
J
K
K
2
3
2
3
A
A
A
A
10
11
12
1
1
1
1
13
Factory Modified Forms
DP Contactors, 1-3 poles
CR353 Definite Purpose Contactors, 120A-150A, 2-pole & 3-pole
List Price,
GO-10DP
$423.00
460.00
816.00
900.00
*If no options are required, catalog number is complete after 11 digits.
Digit 12 Auxiliary Contacts
Digit 10 Coil Selection
Coil Voltage
60 Hz
50 Hz
Catalog Number
Digit 10
115-120
230-240
277
460-480
575-600
110
220
–
440
550
A
B
F
C
D
Catalog Number
Digit 12
A*
B
C
D
Auxiliary Contacts
None
10FLA, 600Vac, 1NO on left side
10FLA, 600Vac, 1NC on left side
10FLA, 600Vac, 1NO-1NC on left side
List Price Adder,
GO-10DP
$0.00
32.00
32.00
60.00
*If this will be the final digit in your selection, omit from catalog number.
Digit 13 Nameplate Marking
For special nameplate markings, contact factory.
Catalog Number Digit 13
Blank
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
Specials
None (standard)
List Price Adder, GO-10DP
$0.00
p. 6
p. 24
p. 27
p. 30
www.GEindustrial.com
17
Definite Purpose Contactors, 4 poles
Factory Modified Forms
CR353 Definite Purpose Contactors, 25A-40A, 4-pole
Factory Modified Forms
DP Contactors, 4 poles
Select contactor from the main table and complete the catalog number by inserting the digits
corresponding to required and optional specifications from the tables below. Note: minimum
order quantities apply to all factory modified forms. Contact factory for details.
Catalog Number
(Complete by adding digits from tables below*)
Locked Rotor Amps,
Three Phase, 50/60 Hz
Full
Load
Amps
Resistive
Amps
Per Pole
240V
480V
600V
Poles
1
2
3
4
5
6
7
8
25
30
40
35
40
50
150
180
240
125
150
200
100
120
160
4
4
4
C
C
C
R
R
R
3
3
3
5
5
5
3
3
3
A
A
A
B
C
D
4
4
4
Required Digits
9
10
11
12
13
List Price,
GO-10DP
$71.00
77.00
89.00
*If no options are required, catalog number is complete after 10 digits.
Digit 9 Line and Load Terminals
Catalog Number
Digit 9
A
B
C
D
Terminal Type
Screw w/ Quick Connect
Box Lug w/ Quick Connect
Screw
Lug
Digit 11 Terminal Markings
List Price Adder, GO-10DP
25-30A
40A
$0.00
$6.00
6.00
6.00
5.00
5.00
6.00
6.00
Digit 10 Coil Selection
AC Coils
Coil Voltage
60 Hz
50 Hz
24
110-120
208-240
277
415-480
575-600
24
110-120
208-240
–
415-480
550
Coil Voltage
12
24-28
110-125
Catalog Number
Digit 10
H
A
B
F
C
D
Catalog Number List Price Adder,
Digit 10
GO-10DP
P
R
S
Catalog Number
Digit 11
0*
1
2
Terminal Markings
No terminal markings
Line (L) at top, Load (T) at bottom
(Standard)
Load (T) at top, Line (L) at bottom
(Inverted)
List Price Adder,
GO-10DP
$1.00
0.00
1.00
Digit 12 Auxiliary Contacts
DC Coils
Catalog Number
Digit 12
A*
B
C
Auxiliary Contacts
None (standard)
10FLA, 250Vac SPDT on left side
10FLA, 250Vac, SPDT left & right
List Price Adder,
GO-10DP
$0.00
16.00
32.00
Digit 13 Nameplate Markings
For special nameplate markings, contact factory.
Catalog Number
Digit 13
Blank
Specials
None (standard)
List Price Adder,
GO-10DP
$0.00
$36.00
36.00
36.00
* If this will be the final digit(s) in your selection, omit from catalog number.
18
Options
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 7
p. 24
p. 27
p. 30
www.GEindustrial.com
Definite Purpose Starters
Factory Modified Forms
CR454 Definite Purpose Starters, 25A-40A
Select your starter from the main table and complete the catalog
number by inserting the digits corresponding to required and optional
specifications from the tables below. For holding interlocks, select the
appropriate auxiliary contact for Digits 13-14. All factory modified forms
require minimum orders/additional multiples. See page 37 for bulk pack details.
Starters with screw line terminals will be supplied
with short covers, and all others will be supplied
with long covers.
Three Phase, 50/60 Hz
Full Resistive
240V
Load Amps
Amps Per Pole HP LRA
480V
HP
LRA
600V
HP
LRA
Catalog Number
(Complete by adding digits from tables below*)
Single Phase
HP➀
120V
240V
Required Digits
Poles
1
2
3
4
5
6
7
8
Options
List Price,
9 10 11 12 13 14 15 16 17 GO-10DPA
25
35
7.5
150
10
125
10
100
2
3
3
C R 4 5 4 A B 3
$78.00
30
40
10
180
15
150
15
120
2
5
3
C R 4 5 4 A C 3
84.00
40
50
10
240
20
200
20
160
3
7.5
3
C R 4 5 4 A D 3
93.75
*If no options are required, catalog number is complete after 11 digits.
➀ For single-phase starters, wire 2 poles in series.
Select range corresponding to full load amps. Overload
digits B-J are Class 10 and require the selection of 1 or 2
for Digit 15. Overload digits K-W are available for Class 10
or Class 20.
Digit 9 Coil Selection
Coil Voltage
60 Hz
50 Hz
Catalog Number
Digit 9
12
24
110-120
208-240
277
440-480
550-600
12
24
110-120
208-240
–
380-415
550-600
E
H
A
B
F
C
D
For Use With 25A-40A Contactor
Overload
Catalog Number List Price Adder,
Amp Range
Digit 11
GO-10DPA
Digit 10 Line Terminals
Catalog Number
Digit 10
Terminal Type
A
B
C
D
L
M
Screw w/ Quick Connect
Lug w/ Quick Connect
Screw
Lug
Sems Clamp w/ 1/4” Quick Connect
Sems Clamp
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 8
p. 24
p. 27
p. 30
www.GEindustrial.com
List Price Adder, GO-10DPA
25-30FLA
40FLA
$0.00
2.25
0.00
2.25
3.75
3.00
$2.25
2.25
2.25
2.25
3.75
3.00
0.16-0.26
0.25-0.41
0.4-0.65
0.65-1.1
1-1.5
1.3-1.9
1.8-2.7
2.5-4.1
4-6.3
5.5-8.5
8-12
10-16
14.5-18
17.5-22
21-26
25-32
30-40
B
C
D
F
G
H
J
K
L
M
N
P
S
T
U
V
W
$55.00
55.00
55.00
55.00
55.00
55.00
55.00
55.00
55.00
57.00
57.00
57.00
57.00
57.00
57.00
65.00
78.00
Factory Modified Forms
DP Starters & 2-Speed Controllers
Digit 11 Overload
Digit 12 through 17 selection continues on next page.
19
Definite Purpose Starters
Factory Modified Forms
CR454 Definite Purpose Starters, 25A-40A (cont.)
Factory modified forms require minimum orders/additional multiples. See page 37 for bulk pack details.
Digit 15 Modifications
Digit 12 Terminal Identification
Catalog Number
Digit 12
A*
D
Special Mark
List Price Adder,
GO-10DPA
Top: L1, L2, L3
Bottom: T1, T2, T3
No markings
Standard
$0.00
Volts
Factory Modified Forms
DP Starters & 2-Speed Controllers
250
600
List Price
Adder,
GO-10DPA
00*
1L
1R
2L
None (standard)
1 SPDT Left
1 SPDT Right
2 SPDT Left
$0.00
16.00
16.00
30.00
2R
2S
4S
10
01
11
12
20
02
22
21
2 SPDT Right
1 SPDT Left & Right
2 SPDT Left & Right
1 NO-NC Left
1 NO-NC Right
1 NO-NC Left & Right
1 N0-NC Left, 2 NO Right
2 NO Left
2 NO Right
2 NO Left & Right
2 NO Left, 1 NO-NC Right
30.00
32.00
60.00
40.00
40.00
80.00
80.00
40.00
40.00
80.00
80.00
* If this will be the final digit(s) in your selection, omit from catalog number.
20
List Price Adder,
GO-10DPA
Modification
C
No modifications (standard
Class 20 overload). Applies only
to overloads K-W in Digit 11.
DIN rail clip option w/ Class 20 OLR
1
2
Class 10 overload
DIN rail clip option w/ Class 10 OLR
A*
1.00
Digits 13 & 14 Auxiliary Contacts
Catalog Number
Digits 13 & 14 Contacts
Catalog Number
Digit 15
$0.00
7.00
0.00
9.00
Digit 16 Nameplate Marking/Enclosure Option
For special nameplate markings, contact factory.
Catalog Number
Digit 16
A*
E
List Price Adder,
GO-10DPA
Specials
None (standard)
Starter assembled in
CR453XEA1 enclosure
$0.00
62.00
Digit 17 Packaging
Catalog Number
Digit 17
Blank
P
List Price Adder,
GO-10DPA
Specials
Single
Bulk pack (requires minimum
order quantities; see page 37
for details)
$0.00
0.00
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 8
p. 24
p. 27
p. 30
www.GEindustrial.com
CR354F, 50A-60A, 2-pole & 3-pole
Select your contactor from the main table and complete the catalog number by inserting the digits corresponding to
required and optional specifications from the tables below. Note: minimum order quantities apply to all factory modified
forms. Contact factory for details.
Catalog Number
(Complete by adding digits from tables below*)
Locked Rotor Amps,
Full
Load
Amps
240V
480V
600V
50
300
250
200
60
360
300
240
Three Phase, 60 Hz
Required Digits
Opt.
Phase
Poles
Overload
Heaters
1
2
3
4
5
6
7
8
9
1
3
1
3
2
3
2
3
1
3
1
3
C
C
C
C
R
R
R
R
3
3
3
3
5
5
5
5
4
4
4
4
F
F
F
F
E
E
F
F
2
3
2
3
B
B
B
B
10
11
12
List Price,
GO-10DPA
$242.00
336.00
282.00
393.00
Digit 12 Auxiliary Contacts
Digit 10 Coil Selection
Coil Voltage
60 Hz
50 Hz
Catalog Number
Digit 10
24
110-120
208-240
277
460-480
575-600
24
110-120
208-240
–
440
550
H
A
B
F
C
D
Catalog Number
Digit 12
Blank
B
C
Auxiliary Contacts
List Price Adder, GO-10DPA
None
$0.00
10A, 250V, SPDT, left side
16.00
10A, 250V, SPDT, left & right
32.00
Factory Modified Forms
DP Starters & 2-Speed Controllers
*If no options are required, catalog number is complete after 11 digits.
Digit 11 Overload Relay
Catalog Number
Digit 11
Overload Relay
3
4
Standard
Ambient Compensated
Standard Forms
Field Installation Kits
Technical Data
Heaters
Outline Drawings
List Price Adder, GO-10DPA
$0.00
16.00
p. 9
p. 24
p. 27
p. 29
p. 30
www.GEindustrial.com
21
Definite Purpose 2-Speed Controllers
Factory Modified Forms
CR455 Definite Purpose Two-speed Controllers, 25A-40A
Select two-speed contactor from the main table and complete
the catalog number by inserting the digits corresponding to
required and optional specifications from the tables below.
Factory modified forms require minimum orders/additional multiples.
See page 37 for bulk pack details.
Factory Modified Forms
DP Starters & 2-Speed Controllers
2-speed controllers with line and load screw
terminals will be supplied with short covers,
and all others will be supplied with long covers.
Three Phase, 50/60 Hz
Single Phase
HP, 50/60 Hz
Full
Load
Amps
HP
LRA
HP
LRA
HP
LRA
120V
240V
25
7.5
150
10
125
10
100
2
3
30
10
180
15
150
15
120
2
5
40
10
240
20
200
20
160
3
7.5
240V
480V
Catalog Number
(Complete by adding digits from tables below*)
600V
Required Digits
Poles
1
2
3
4
5
6
7
8
Options
List Price,
9 10 11 12 13 14 15 16 17 GO-10DPA
2-3
C R 4 5 5 A B 2
D
$190.00
3-3
C R 4 5 5 A B 3
D
202.00
2-3
C R 4 5 5 A C 2
D
202.00
3-3
C R 4 5 5 A C 3
D
214.00
2-3
C R 4 5 5 A D 2
D
217.50
3-3
C R 4 5 5 A D 3
D
230.00
*If no options are required, catalog number is complete after 12 digits.
Digit 10 Line Terminals
Digit 9 Coil Selection
Coil Voltage
60 Hz
50 Hz
Catalog Number
Digit 9
12
24
110-120
208-240
277
440-480
550-600
12
24
110-120
208-240
–
380-415
550-600
E
H
A
B
F
C
D
List Price Adder, GO-10DPA
Catalog Number
Digit 10
Terminal Type
A
B
C
D
L
M
25-30FLA
2-3 poles
Screw w/ Quick Connect
Lug w/ Quick Connect
Screw
Lug
Sems Clamp w/ 1/4” Quick Connect
Sems Clamp
$0.00
3.75
0.00
3.75
6.25
5.00
40FLA 25-30FLA 40FLA
2-3 poles 3-3 poles 3-3 poles
$3.75
3.75
3.75
3.75
6.25
5.00
$0.00
4.50
0.00
4.50
7.50
6.00
$4.50
4.50
4.50
4.50
7.50
6.00
Digit 11 Load Terminals
List Price Adder, GO-10DPA
Catalog Number
Digit 11
Terminal Type
A
B
C
D
L
M
22
Screw w/ Quick Connect
Lug w/ Quick Connect
Screw
Lug
Sems Clamp w/ 1/4” Quick Connect
Sems Clamp
25-30FLA
2-3 poles
$0.00
3.75
0.00
3.75
6.25
5.00
40FLA 25-30FLA 40FLA
2-3 poles 3-3 poles 3-3 poles
$3.75
3.75
3.75
3.75
6.25
5.00
$0.00
4.50
0.00
4.50
7.50
6.00
$4.50
4.50
4.50
4.50
7.50
6.00
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
p. 10
p. 24
p. 27
p. 30
www.GEindustrial.com
Factory modified forms require a minimum order of 24 and additional multiples of 12.
See page 37 for bulk pack details.
Digit 15 Modifications
Volts
Catalog Number
Digits 13 & 14 Contacts
250
600
List Price Adder,
GO-10DPA
00*
1L
1R
None (standard)
1 SPDT Left
1 SPDT Right
$0.00
16.00
16.00
2L
2R
2S
4S
10
01
11
12
20
02
22
21
2 SPDT Left
2 SPDT Right
1 SPDT Left & Right
2 SPDT Left & Right
1 NO-NC Left
1 NO-NC Right
1 NO-NC Left & Right
1 N0-NC Left, 2 NO Right
2 NO Left
2 NO Right
2 NO Left & Right
2 NO Left, 1 NO-NC Right
30.00
30.00
32.00
60.00
40.00
40.00
80.00
80.00
40.00
40.00
80.00
80.00
Catalog Number
Digit 15
Modification
A*
B
C
D
G
Catalog Number
Digit 16
A*
Specials
None (standard)
List Price Adder,
GO-10DPA
$0.00
Digit 17 Packaging
P
www.GEindustrial.com
18.00
Digit 16 Nameplate Marking
Blank
p. 10
p. 24
p. 27
p. 30
$0.00
4.00
14.00
0.00
For special nameplate markings, contact factory.
Catalog Number
Digit 17
Standard Forms
Field Installation Kits
Technical Data
Outline Drawings
No Modifications (standard)
Coil rotated (terminal on load side)
DIN rail clip option
No cover (available on screw
terminal forms only)
Coil rotated & DIN rail clip option
List Price Adder,
GO-10DPA
Specials
Single
Bulk pack (requires minimum
order quantities; see page 37
for details)
List Price Adder,
GO-10DPA
$0.00
0.00
Factory Modified Forms
DP Starters & 2-Speed Controllers
Digits 13 & 14 Auxiliary Contacts
* If this will be the final digit(s) in your selection, omit from catalog number.
23
Field Installation Kits
Not available for CR453C Compact Design
Auxiliary Contact Kits
Contactor
Contactor
Rating
Description
250V, Side Mounted, SPDT
250V, Side Mounted, Two SPDT
600V, Side Mounted, 1NO-1NC (BCLL11 with quick-connects)
25A-40A
CR453A
2-3 pole 600V, Side Mounted, 2 NO (BCLL20 with quick-connects)
Mechanical & electrical interlock with 2 NC aux contacts
(BEL02 with quick-connects)
DIN Rail Clip (sold only in multiples of 10)
CR353A, F 50A-60A SPDT
CR353F
75A-90A SPDT
CR353G 120A-150A 1NO-1NC
Catalog
Number
List Price,
GO-10DP
CR453XM602
65.00
CR453XDCA
CR353XAAA
CR353XAAB
CR353XADC
7.00 ea.
16.00
20.00
32.00
CR453XC211
CR453XC222
CR453XC611
CR453XC620
$16.00
30.00
40.00
40.00
C-2000 Accessories
For more information, see the C-2000 Contactors & Starters Purchasing Guide (DEP-014). For use with CR45* Devices.
DIN Rail
Aux. Contacts & Mechanical Interlock
Accessory
Description
Catalog Number
List Price,
GO-10C2
Front-Mount Aux.
1NO
BCLF10
$11.00
Contact Blocks
1NC
BCLF01
11.00
Side-Mount Aux.
1NO-1NC
BCLL11
19.00
Contact Blocks
2NO
BCLL20
19.00
Mechanical Interlock
2NC
BEL02
35.00
Pneumatic Timers
Type
Time Delay On
Time Delay Off
Time Range
Contacts
Catalog Number
List Price,
GO-10C2
0.1-30 sec.
1-60 sec.
0.1-30 sec.
1-60 sec.
1NO-1NC
1NO-1NC
1NO-1NC
1NO-1NC
BTLF30C
BTLF60C
BTLF30D
BTLF60D
$120.00
120.00
120.00
120.00
Field Installation Kits
24
RC
Diode
Varistor
Catalog Number
List Price,
GO-10C2
35mm DIN Rail (1 meter)
CLXR35
$8.00
Release Voltage
Catalog Number
List Price,
GO-10C2
24-32 Vac/dc
42-48 Vac/dc
110-125 Vac/dc
208-277 Vac/dc
380-480 Vac/dc
500-600 Vac/dc
RMLFD
RMLFG
RMLFJ
RMLFN
RMLFU
RMLFY
$70.00
70.00
70.00
70.00
70.00
70.00
Catalog Number
List Price,
GO-10DP
CR453XG1
$3.00
Mechanical Latch Block
Coil Terminal Cover
Surge Suppressors
Type
Description
Voltage
24-48 Vac
50-127 Vac
130-240 Vac
12-600 Vac
24-48 Vac/dc
50-127 Vac/dc
130-250 Vac/dc
380-500 Vac/dc
Catalog Number
BSLR2G
BSLR2K
BSLR2R
BSLDZ
BSLV3G
BSLV3K
BSLV3R
BSLV3U
List Price,
GO-10C2
$24.00
24.00
24.00
24.00
24.00
24.00
24.00
24.00
Description
Push-on coil terminal
guard for IP 20
Finger-Safe Protection
www.GEindustrial.com
Overload Relays
Remote Electrical Reset
for RT1 Overload Relays
Direct mount, manual/auto reset (stop/reset only). Requires contactor
with sems clamp terminal (without quick connects) on load side.
Select M for Digit 11 on p. 14.
Rated Current
(Amps)
Min.
Max.
0.16
0.25
0.4
0.65
1
1.3
1.8
2.5
4
5.5
8
10
14.5
17.5
21
25
30
0.26
0.41
0.65
1.1
1.5
1.9
2.7
4.1
6.3
8.5
12
16
18
22
26
32
40
Max. Fuse
Rating
(Amps)
1
1
3
6
6
6
10
15
20
25
40
50
60
70
80
100
100
Max. Circuit
Breaker
Catalog Number
Rating
(Amps) Class 10 Class 20
15
15
15
15
15
15
15
15
15
15
30
35
40
50
60
80
80
RT1B
RT1C
RT1D
RT1F
RT1G
RT1H
RT1J
RT1K
RT1L
RT1M
RT1N
RT1P
RT1S
RT1T
RT1U
RT1V
RT1W
—
—
—
—
—
—
—
RT12K
RT12L
RT12M
RT12N
RT12P
RT12S
RT12T
RT12U
RT12V
RT12W
List Price,
GO-10C2
$55.00
55.00
55.00
55.00
55.00
55.00
55.00
55.00
55.00
57.00
57.00
57.00
57.00
57.00
57.00
65.00
78.00
Voltage 50/60
Hz AC/DC
Catalog Number
List Price,
GO-10C2
12
24
48
110-120
220-240
380-415
440-480
RTXRRB
RTXRRD
RTXRRG
RTXRRJ
RTXRRN
RTXRRU
RTXRRX
$55.00
55.00
55.00
55.00
55.00
55.00
55.00
Panel Mount Overload
Base Adapter
Catalog Number
List Price,
GO-10C2
RTXP
$12.00
NEMA Type 1 Enclosure Kits for Contactors & Starters
For 120A-150A contactor enclosures, contact your local GE Industrial
Systems sales office.
Device
Rating
Catalog Number
List Price, GO-10DP
Contactors & Starters
25A-40A, 1-3 pole
25A-40A, 4-pole and
50A-60A, 3-pole
75A-90A
50A
CR453XE1A
$42.00
CR353XE1BB
42.00
CR353XE1BC
CR353XE1AA
60.00
48.00
Contactors
Starters
Enclosure with optional
CLXR11 reset kit
Accessories for CR453XE1A Enclosure
Catalog Number List Price, GO-10C2
Start/Stop Push Button without Light
115V
Start/Stop Push Button with Light
230V
460V
575V
H-O-A Switch
On-Off Switch
Red Indicating Light (for use with H-O-A or On-Off selector switches)➀
Reset Kit for Starter Enclosure
CLXP1B
CLXP1C1
$39.00
112.00
CLXP1C2
CLXP1C3
CLXP1C4
CLXP1D
CLXP1E
CLXP1F
CLXR11
112.00
112.00
112.00
39.00
39.00
67.00
8.00
Field Installation Kits
Accessory
➀ Each kit has three resistors allowing light to be used with all voltages 110 through 600.
www.GEindustrial.com
25
Replacement Parts
AC Replacement Coils
Replacement Parts
Coil
Contactor Letter Code
25-40A
CR453A
CR454A
CR455A
A
B
C
D
E
F
H
A
B
C
F
25A-40A
CR353A
CR354A
CR355A H (2-3 pole)
H (4 pole)
D
A
50A-60A
B
CR353FE,F
C
CR354FE,F
D
F
H
A
B
50A-60A
C
CR355EE,F
D
F
H
A
B
75A-90A
C
CR353EG,H
D
CR355EG,H
F
H
A
120A
B
CR353GJ
C
D
A
150A
B
CR353GK
C
D
26
Replacement Contact Kits for CR353
60Hz
Volts
50Hz
110-120
208-240
440-480
550-600
12
277
24
110-120
208-240
415-480
277
24
24
575-600
110-120
208-240
440-480
575-600
277
24
110-120
208-240
415-480
575-600
277
24
110-120
208-240
440-480
575-600
277
24
115-120
230-240
460-480
575-600
115-120
230-240
460-480
575-600
110-120
208-240
380-415
550-600
12
–
24
110-120
208-240
415-480
–
24
24
550
110-120
208-240
380-415
550
–
24
110-120
208-240
415-480
550
–
24
110-120
208-240
380-415
550
–
24
110
220
440
550
110
220
440
550
Catalog
Number
List Price,
GO-11G
55-537283A $ 24.00
55-537283B 24.00
55-537283C 24.00
55-537283D 24.00
55-537283E 24.00
55-537283F 24.00
55-537283H 24.00
55-B31A
24.00
55-B31B
24.00
55-B31C
24.00
55-B31F
24.00
55-B34H
24.00
55-B31H
24.00
55-B31D
24.00
55-B38A
30.00
55-B38B
30.00
55-B38C
30.00
55-B38D
30.00
55-B38F
30.00
55-B38H
30.00
55-B21A
54.00
55-B21B
54.00
55-B21C
54.00
55-B21D
54.00
55-B21F
54.00
55-B21H
54.00
55-B22A
60.00
55-B22B
60.00
55-B22C
60.00
55-B22D
60.00
55-B22F
60.00
55-B22H
60.00
55-501336G002 148.00
55-501336G003 148.00
55-501336G004 148.00
55-501336G005 148.00
55-501563G002 202.00
55-501563G003 202.00
55-501563G004 202.00
55-501563G005 202.00
Contactor
Rating
Poles
Per Kit
Termination
Catalog Number
List Price,
GO-11GS
40A
50A➀
60A➁
75A
90A
120A
150A
4
1
1
1
1
3
3
Screw/Quick Connect
Lug/Quick Connect
Lug/Quick Connect
Lug/Quick Connect
Lug/Quick Connect
Pressure
Pressure
55-152313G111B
55-152313G216
55-152313G237
55-152313G218
55-152313G217
55-152313G139
55-152313G140
$64.00
32.00
35.00
58.00
84.00
308.00
418.00
➀ For CR353EE and CR355EE, use 55-152313G150, List Price, $26.00, GO-11GS.
➁ For CR353EF and CR355EF, use 55-152313G219, List Price, $32.00, GO-11GS.
DP Contactors Sample Case
Includes case and the following:
CR453CA1AAA
CR453CB3AAA
CR453CE2ABB
CR453AB3AAA
CR453AD3ADM
BCLF10
CR453XC211
CR453XC611
CR453XM602
RT1U
Screwdriver
Item
Catalog
Number
List Price,
GO-10DP
DP Contactors Sample Case
CR453KIT
$500.00
www.GEindustrial.com
Technical Data
DP Controls
% of Nominal Coil
Voltage
Pickup
Dropout
1Ø per pole, 1-pole or
Family
CR453
Amps
1-pole + shunt
1Ø, 2-pole
Type Inductive Resistive 240/277V 480V 600V 240/277V 480V 600V
CA
CB
CC
CD
CE
20
25
30
35
40
30
35
40
50
50
120
150
180
180
180
100
125
150
150
150
80
100
120
120
120
Amps
120
150
180
210
240
100
125
150
175
200
80
100
120
140
160
85%
85%
85%
85%
85%
60%
60%
60%
60%
60%
3Ø 2-pole, 1Ø 1-pole
16-8
16-8
16-8
16-8
14-4
Family
Type Inductive Resistive 240V
480V 600V 240V 480V 600V 240V 480V 600V Pickup Dropout
AB
AC
AD
AB
AC
AD
FE
FF
EG
EH
GJ
GK
125
150
200
125
150
200
250
300
375
450
600
750
CR353,
CR355
CR353,
CR354
CR353,
CR355
CR353
35
40
50
35
40
50
62
75
90
90
120
150
150
180
240
150
180
240
300
360
450
540
720
900
100
120
160
100
120
160
200
240
300
360
480
600
— —
— —
— —
150 125
180 150
240 200
— —
— —
— —
— —
— —
— —
UL References
CR453
A
C
CR353
AB
AC
AD
EG
EH
FE
FF
GJ
GK
—
—
—
125
150
192
250
300
375
450
600
750
≤85%
≤85%
≤85%
≤85%
≤85%
≤85%
≤85%
≤85%
≤85%
≤85%
≤85%
≤85%
—
—
—
100
120
160
200
240
300
360
480
600
Product Line
CR455
A
A
E1811
E1811
E1811
Family
CR354
CR355
File
FE
FF
—
—
—
150
180
192
300
360
450
540
720
900
≤60%
≤60%
≤60%
≤50%
≤50%
≤50%
≤60%
≤60%
≤55%
≤55%
≤65%
≤65%
0.7
0.7
0.7
0.7
0.7
Wire
Size
Range
AWG
Terminal
Torque
(lb.-in.)
Approx.
Shipping
Weight (lbs.)
16-8
16-8
14-4
16-8
16-8
14-4
14-2
14-2
14-2/0
14-2/0
8-3/0
8-3/0
20
20
40
20
20
40
50
50
50
50
200
200
1.0 (CR453)
3.1 (CR454)
3.1 (CR455)
1.5 (CR353)
4.3 (CR355)
1.9 (CR353),
3.5 (CR354)
4.0 (CR353),
8.1 (CR355)
17.5
Aux. Contact Ratings
Family
CR454
AB
AC
AD
—
—
—
100
120
160
—
—
—
—
—
—
Approx.
Shipping
Weight (lbs.)
20
20
20
20
40
Part Winding
CR453,
CR454,
CR455
25
30
40
25
30
40
50
60
75
90
120
150
Terminal
Torque
(lb.-in.)
% of Nominal Coil
Voltage
Locked Rotor Amps
3Ø 3-pole, 1Ø 2-pole
Wire
Size
Range
AWG
Technical Data
Locked Rotor Amps
AB
AC
AD
EE
EF
EG
EH
File
E1811
E1811
E1811
E1811
E1811
E1811
E1811
E1811
E1811
E1811
E1811
E1811
E1811
E1811
Volume
17
17
NA
Volume
2
2
2
2
2
2
2
2
2
2
2
2
2
3
Section
Issued
1
3
NA
6/15/01
6/15/01
5/24/01
Section
Issued
52
51
21
50
50
50
26
25
24
30
54
54
47
5
09/26/74
09/25/74
02/09/67
08/09/75
08/09/75
08/09/75
03/10/70
01/22/70
10/15/68
06/01/71
06/17/75
06/17/75
01/31/74
05/26/76
250V SPDT
CR453A
Kits
453XC2**
600V
453XC6**
600V Interlock 453XM602
CR353A,F
250V SPDT
353XAAA
CR353E
250V SPDT
353XAAB
CR353G
600V
353XA*C
Catalog Number
11 A, 1/3 HP at 250 VAC; 1/2 A
at 125 VDC; 1/4 A at 250 VDC
A600, Q600 Pilot duty
A600, Q600 Pilot duty
10 A, 1/3 HP at 250 VAC; 1/2 A
at 125 VDC; 1/4 A at 250 VDC
10 A, 1/3 HP at 250 VAC; 1/2 A
at 125 VDC; 1/4 A at 250 VDC
A600, P300 Pilot duty
CSA References
Class
1222 01
3211 04
Product
CSA
REFRIGERATIO
N
NI DUSTRIALN
CO TROL
Line Certificate EQUIPMENT – Refrigeration EQUIPMENT – Motor
4813 01
Machines & Accessories
Controllers – Magnetic
HEATERS –
AIR,
ACCESSORIES
✔
✔
✔
✔
✔
CR453C 212530
CR453A 1209883
CR453C CE Technical Data
Type
CR453CA
CR453CB
CR453CC
CR453CD
CR453CE
www.GEindustrial.com
Type
Electrical Rating
AC1 @ 480V AC3 @ 240V AC3 @ 480V UL File No.
30A
35A
40A
50A
50A
20A
25A
30A
35A
40A
16.7A
20.8A
25A
25A
25A
E126105
E126105
E126105
E126105
E126105
27
Technical Data
AC Coils
Family
CR453C
CR45*A
Technical Data
CR355A
CR35*F
CR35*E
CR353G
DC Coils
Coil Voltage
24V, 50/60 Hz
110-120V, 50/60 Hz
208-240V, 50/60 Hz
277V, 60 Hz
12V, 50/60 Hz
24V, 50/60 Hz
110-120V, 50/60 Hz
208-240V, 50/60 Hz
277V, 60 Hz
380-415V, 50 Hz; 440-480V, 50 Hz
550-600V, 60 Hz
24V, 50/60 Hz
110-120V, 50/60 Hz
208-240V, 50/60 Hz
24V, 60 Hz
115-120V 60 Hz, 110V 50 Hz
208-240V 60 Hz, 220V 50 Hz
277V, 60 Hz
460V 60 Hz, 440V 50 Hz
600V 60 Hz, 550V 50 Hz
24V, 50/60 Hz
110-120V, 50/60 Hz
208-240V, 50-60 Hz
277V, 60 Hz
440-480V 60 Hz, 380-415V 60 Hz
575-600V 60 Hz, 550V 50 Hz
115-120V 60 Hz, 110V 50 Hz
230-240V 60 Hz, 220V 50 Hz
460-480 60 Hz, 440V 50 Hz
575-600 60 Hz, 550V 50 Hz
Inrush
VA
29
34
33
30
50
50
50
50
50
50
50
77
77
77
125
125
125
125
125
125
233
233
233
233
233
233
1150
1150
1150
1150
Sealed
VA
5.0
6.0
5.6
6.3
7
7
7
7
7
7
7
12
12
12
17
17
17
17
17
17
40
40
40
40
40
40
80
80
80
80
Sealed
Watts
2.6
3.3
3.7
3.2
1.8
1.8
1.8
1.8
2.3
2.3
2.3
4.4
4.4
4.4
8
8
8
8
8
8
16
16
16
16
16
16
18.4
18.4
18.4
18.4
Resistance
Ohms ±10%
11
244
990
1520
2.3
8.4
216
852
1137
3322
4377
3.9
90
366
2.7
64
241
389
972
2074
1.0
28
109
169
547
655
2.11
10.6
41.8
67.0
Resistance
Voltage Inrush Sealed Sealed Ohms ±10%
Family
DC
VA
VA
Watts Inrush Sealed
12
CR353A 24-28
110-125
12
CR353F 24-28
110-125
12
24-48
CR353E
48
110-125
46
44
141
107
110
110
278
270
301
292
2.3
2.0
5.1
3.8
3.8
5.25
11.3
11.1
12.6
12.0
2.3
2.0
5.1
3.8
3.8
5.25
11.3
11.1
12.6
12.0
3.13
13.1
102
1.35
5.2
133
0.54
2.13
7.65
47.1
61.6
283
2783
37.6
153
2519
12.7
51.9
183.0
1133
Mounting Positions
To maintain operating integrity, contactors must be mounted in one of the positions shown below:
CR353
CR453C
Keyhole slot at top
30°
30°
CR453A
28
www.GEindustrial.com
Definite Purpose Starters
Heater Selection
For CR354 Definite Purpose Starters, 50A-60A
Standard or ambient compensated overload relays, open or Type 1 enclosed
To prevent overloading the starter, do not select heater(s) for a motor with a rating larger than the maximum shown on
the starter nameplate. If a motor’s full-load amps fall between two ratings, select heaters with the higher of the two ratings.
For continuous rated motors with a service factor of 1.15 to 1.25, select the heater with maximum motors amps equal
to or immediately greater than the motor full-load current. This will provide a maximum of 125% protection. For
continuous rated motors with no service factor, multiply the full-load current of the motor by 0.9 and use the resulting
value to select the heater.
To protect the heater and starter during a short circuit, provide motor branch circuit protection in accordance with
Table 420-152 in Article 430 of the National Electrical Code. In no case should the fuse rating exceed 4 times the
motor full-load current for single-element fuses or 2.25 times the motor full-load current for dual-element fuses.
Do not use these tables to select heaters for hermetic motor applications. Contact your GE Industrial Systems sales
office for information.
Heater amps are based on 75°C wire. All heaters are packaged 3 per carton and carry a List Price of $9.00, GO-10H.
Max. Motor FLA
50A Starter
60A Starter
6.15
6.47
6.84
7.72
8.99
9.87
10.6
12.0
12.3
14.0
15.7
17.6
20.1
23.3
27.0
29.8
32.2
33.9
36.7
42.5
46.2
50.0
—
—
—
6.15
6.47
6.84
7.72
8.99
9.87
10.6
12.0
12.3
14.0
15.7
17.6
20.1
23.3
27.0
29.8
32.2
33.9
36.7
42.5
46.2
50.3
52.4
58.2
60.0
www.GEindustrial.com
Catalog Number
CR123C592A
CR123C630A
CR123C695A
CR123C778A
CR123C867A
CR123C955A
CR123C104B
CR123C113B
CR123C125B
CR123C137B
CR123C151B
CR123C163B
CR123C180B
CR123C198B
CR123C214B
CR123C228B
CR123C250B
CR123C273B
CR123C303B
CR123C330B
CR123C366B
CR123C400B
CR123C440B
CR123C460B
CR123C500B
Three-phase (3 heaters required)
Max. Motor FLA
50A Starter
60A Starter
6.07
6.63
7.35
8.09
8.89
9.78
10.8
11.8
13.0
14.5
16.1
17.9
19.8
22.0
24.4
27.1
29.9
34.1
38.8
44.3
50.0
—
—
—
—
—
5.14
5.63
6.26
7.15
7.58
8.39
9.11
9.67
11.0
12.0
14.4
16.3
17.3
19.3
20.9
22.9
24.7
28.0
32.1
35.9
41.5
43.4
46.4
50.9
56.9
60.0
Catalog Number
CR123C630A
CR123C695A
CR123C778A
CR123C867A
CR123C955A
CR123C104B
CR123C113B
CR123C125B
CR123C137B
CR123C151B
CR123C163B
CR123C180B
CR123C198B
CR123C214B
CR123C228B
CR123C250B
CR123C273B
CR123C303B
CR123C330B
CR123C366B
CR123C400B
CR123C440B
CR123C460B
CR123C500B
CR123C550B
CR123C600B
Heater Selection
Single-phase (1 heater required)
29
Outline Drawings
Dual Dimensions
CR453C
2.78
(70.7)
2.56
(65)
2.01
(51)
0.85
(21.5)
2.44
(62)
2.01
(51)
1.74
(44.3)
1.51
(38.3)
3.27
(83)
2.99
(76)
Inches
for Estimating Only
mm
0.20 , 4 PLACES
(5.0)
1.63
(41.3)
(SHOWN W/SHUNT)
2.25
57.2
CR453A + 250V Aux. Contacts
2.01
51.1
1.70
43.2
.345
8.76
3.75
95.3
3.75
95.3
3.16
80.1
.58
14.8
3.13
79.4
3.28
83.3
MOUNTING HOLES FOR
#10 SCREWS (6 PLACES)
BASE PLATE DETAIL
2.25
57.2
CR453A + 600V Aux. Contacts
2.01
51.1
1.70
43.2
FRONT-MOUNT
AUX. CONTACTS
(IF USED)
Outline Drawings
.345
8.76
30
3.75
95.3
3.13
79.4
3.35
85.1
3.16
80.1
.37
9.4
4.27
108.5
3.28
83.3
3.75
95.3
BASE PLATE DETAIL
MOUNTING HOLES FOR
#10 SCREWS (6 PLACES)
www.GEindustrial.com
Dual Dimensions
CR353A, 4-pole + 250V Aux. Contacts
Inches
for Estimating Only
mm
2.51
63.7
3.08
78.2
1.80
45.7
3.75
95.3
3.12
79.2
1.75
44.4
.31
7.9
3.30
83.8
BASE PLATE DETAIL
CR353F + 250V Aux. Contacts
3.25
82.5
3.75
95.2
MOUNTING HOLES FOR
#10 SCREWS (6 PLACES)
2.51
63.7
2.74
69.6
1.80
45.7
3.75
95.3
3.12
79.2
1.75
44.4
.50
12.7
BASE PLATE DETAIL
CR353E + 250V Aux. Contacts
3.38
85.9
MOUNTING HOLES FOR
#10 SCREWS (4 PLACES)
3.75
95.2
MOUNTING HOLES FOR
#10 SCREWS (6 PLACES)
.19
4.8
5.00
127.0
5.00
127.0
1.25
31.7
2.50
63.5
4.28
108.7
www.GEindustrial.com
.59
15.1
1.44
36.6
2.88
73.1
BASE PLATE DETAIL
Outline Drawings
3.58
90.9
3.25
82.5
31
Outline Drawings
Dual Dimensions
CR353G + 600V Aux. Contacts
3.00
76.2
6.50
165.1
8.81
215.9
Inches
for Estimating Only
mm
3.62
92.0
7.75
196.8
MOUNTING HOLES FOR
1/4" SCREWS (3 PLACES)
1.50
38.1
CR454A + 250V Aux. Contacts
3.13
79.4
4.50
114.3
2.25
57.0
1.12
28.5
.24
6.0
1.71
43.3
3.28
83.3
Outline Drawings
5.68
144.3
32
1.70
43.2
.27
6.9
MOUNTING HOLES FOR
#10 SCREWS (6 PLACES)
3.87
98.2
www.GEindustrial.com
Dual Dimensions
CR454A + 600V Aux. Contacts
4.27
108.5
Inches
for Estimating Only
mm
2.25
57.0
3.35
85.1
.27
6.9
1.70
43.2
1.49
37.8
3.13
79.4
.24
6.0
3.28
83.3
5.68
144.3
FRONT-MOUNT
AUX. CONTACTS
(IF USED)
MOUNTING HOLES
FOR #10 SCREWS
(6 PLACES)
3.87
98.2
CR354F + 250V Aux. Contacts
.38
9.7
6.50
165.1
7.13
181.1
2.00
50.8
3.75
95.3
.94
23.9
2.00
50.8
3.63
92.2
www.GEindustrial.com
.50
12.7
.25
6.4
Outline Drawings
1.50
38.1
1.91
48.5
3.62
91.9
MOUNTING HOLES FOR
1/4" SCREWS (3 PLACES)
33
Outline Drawings
Dual Dimensions
CR455A + 250V Aux. Contacts
.24
6.0
4.70
119.4
3.75
95.3
Inches
for Estimating Only
mm
3.28
83.3
.35
8.8
3.35
85.1
1.71
43.3
1.70
43.2
2.45
62.2
5.86
148.8
MOUNTING HOLES FOR
#10 SCREWS
CR455A + 600V Aux. Contacts
1.49
37.9
.24
6.0
2.45
62.3
FRONT-MOUNT
AUX. CONTACTS
(IF USED)
3.28
83.3
3.75
95.3
1.70
43.2
3.13
79.4
4.70
119.3
3.35
85.1
5.44
138.1
Outline Drawings
4.27
108.5
34
.27
6.9
MOUNTING HOLES
FOR #10 SCREWS
(12 PLACES)
www.GEindustrial.com
Dual Dimensions
CR355A, 4-4 pole + 250V Aux. Contacts
.84
21.4
.16
4.0
.84
21.4
.84
21.4
Inches
for Estimating Only
mm
.25
6.4
.84
21.4
3.69
93.7
3.25
82.6
3.3
84.1
.75
19.1
.75
19.1
.75
19.1
2.0
50.8
.75
19.1
4.09
104.0
8.09
205.6
CR355A, 5-3 pole + 250V Aux. Contacts
1.3
33.3
.84
21.4
.84
21.4
.84
21.4
.25
6.4
.84
21.4
2.13
54.0
3.25
82.6
3.75
95.2
3.5
88.9
.88
22.2
.88
22.2
2.0
50.8
.88
22.2
.88
22.2
4.09
104.0
8.09
205.6
CR355E + 250V Aux. Contacts
.63
15.9
8.38
212.7
5.0
127.0
4.63
117.5
4.0
101.6
www.GEindustrial.com
.75
19.1
3.38
85.7
3.38
85.7
.75
19.1
Outline Drawings
.25
6.4
35
Outline Drawings
Dual Dimensions
Enclosure CR453XE1A, CR353XE1AA (without reset button),
CR353XE1BB (with reset button)
6.00
152.4
1.63
41.4
3.00
76.2
Inches
for Estimating Only
mm
.13
3.3
1.380
35.05
"B"
10.00
254.0
"B"
(BOTH SIDES)
8.00
203.2
"A"
(TOP & BO TTOM)
"B"
(TOP & BOTTOM)
1.19
30.2
1.00
25.4
1.38
35.1
1.00
25.4
4.00
101.6
3 POINT MTG
FOR #10 SCREWS
1.00
25.4
1.75
44.5
.50
12.7
4.63
117.6
RESET BUTTON IN
STARTER ENCLOSURE
1.75
44.5
3.00
76.2
1.13
28.7
"A" Combination Knock-Outs for 3/4" or 1" Conduit
"B" Comnination Knock-Outs for 1/2" or 3/4" Conduit
Enclosure CR353XE1BC
7.38
187.3
1.63
41.3
3.69
93.7
.19
4.8
1.50
38.1
"B"
13.25
336.6
"B"
(BOTH SIDES)
11.0
279.4
"A"
(TOP & BO TTOM)
"B"
(TOP & BOTTOM)
1.19
30.2
1.50
38.1
1.13
28.6
5.00
127.0
1.19
90.2
3 POINT MTG
FOR 1/4" SCREWS
6.13
155.6
RESET BUTTON IN
STARTER ENCLOSURE
.50
12.7
2.00
50.8
2.38
60.3
3.69
93.7
1.50
38.1
Outline Drawings
"A" Combination Knock-Outs for 1" or 1 1/4" Conduit
"B" Comnination Knock-Outs for 1/2" or 3/4" Conduit
36
www.GEindustrial.com
Bulk Pack Data
Packaging
Units
in single
boxes
Units
bulk
packed
Description
Units
Single box
1
Overpack
(20 single boxes)
20
Case (60 overpacks)
1,200
20’ container (20 cases)
24,000
40’ container (44 cases)
52,800
Overpack (20 DPs)
20
Case (90 overpacks)
1,800
20’ container (24 cases)
43,200
40’ container (52 cases)
93,600
Item
Weight
Dimensions (H x W x D)
1-pole
10.1 oz.
1-pole + shunt
10.4 oz.
.3” x 2.4” x 3.7”
2-pole
10.5 oz.
1-pole
2.5 lbs.
1-pole + shunt
2.6 lbs.
7.9” x 8” x 13”
2-pole
2.6 lbs.
1-pole
180.8 lbs.
1-pole + shunt
185.2 lbs.
39” x 43.3” x 42.1”
2-pole
186.8 lbs.
1-pole
3,616 lbs. (net)
1-pole + shunt 3,704 lbs. (net)
7.8’ x 7.7’ x 19.4’
2-pole
3,736 lbs. (net)
1-pole
7,955 lbs. (net)
1-pole + shunt 8,149 lbs. (net)
7.8’ x 7.7’ x 39.5’
2-pole
8,219 lbs. (net)
1-pole
2.5 lbs.
1-pole + shunt
2.6 lbs.
3.7” x 11.2” x 14.2”
2-pole
2.6 lbs.
1-pole
236.5 lbs.
1-pole + shunt
243.1 lbs.
41.3” x 44.5” x 35.4”
2-pole
245.5 lbs.
1-pole
5,676 lbs. (net)
1-pole + shunt 5,834 lbs. (net)
7.8’ x 7.7’ x 19.4’
2-pole
5,652 lbs. (net)
1-pole
12,298 lbs. (net)
1-pole + shunt 12,641 lbs. (net)
7.8’ x 7.7’ x 39.5’
2-pole
12,766 lbs. (net)
Case
(60 overpacks)
Single
box
Overpack
(20 single boxes)
Bulk Pack Data
CR453C packaging
Case
(90 overpacks)
Overpack
(20 DPs)
CR453A bulk pack
CR453A single pack (non-stock)
Min. order /
additional multiples
96/24
108/18
90/15
48/24
48/24
Weight
per box
1 lb.
1.1 lbs.
1.2 lbs.
3.1 lbs.
3.1 lbs.
Dimensions per box
(H x W x D)
3.5” x 2.5” x 4.25”
3.5” x 3” x 4.25”
3.5” x 3.5” x 4.25”
7.25” x 5.75” x 8”
7.25” x 5.75” x 8”
CR453A corrugated box (with returnable trays)
Min. order /
Product
additional multiples
Contactors with no aux. contacts
96/32
Contactors with 1 aux. contact
96/32
Contactors with 2 aux. contacts
96/32
Starters
48/24
2-speed controllers
48/24
Items
per tray
8
8
8
6
6
Trays
per box
4
4
4
4
4
Weight Dimensions per box
per box
(H x W x D)
30 lbs.
7.5” x 19” x 19”
30 lbs.
7.5” x 19” x 19”
30 lbs.
7.5” x 19” x 19”
74 lbs. 14.25” x 23.5” x 25”
74 lbs. 14.25” x 23.5” x 25”
CR453A skid pack (with returnable trays)
Min. order /
Product
additional multiples
Contactors with no aux. contacts
240/80
Contactors with 1 aux. contact
240/80
Contactors with 2 aux. contacts
240/80
Starters
120/40
2-speed controllers
120/40
Items
per tray
8
8
8
4
4
Trays
per layer
10
10
10
10
10
Layers
per skid
3 to 8
3 to 8
3 to 8
3 to 8
3 to 8
Product
Contactors with no aux. contacts
Contactors with 1 aux. contact
Contactors with 2 aux. contacts
Starters
2-speed controllers
www.GEindustrial.com
Weight Dimensions per layer
per layer
(H x W x D)
45 lbs.
4” x 40” x 48”
50 lbs.
4” x 40” x 48”
55 lbs.
4” x 40” x 48”
55 lbs.
4” x 40” x 48”
50 lbs.
4” x 40” x 48”
37