Stainless Steel
Low Profile Compression
CBES
Series
LOAD CELL
+
Capacities 50kg to 50000kg
+
Sealed to IP67
+
Low Profile
+
Integral Load Button
+
Robust Construction
+
3 YEAR WARRANTY
Options Available
Standard and Special mounting bases
Full Range of mounting options
available (consult Factory)
Special sizes available on request
Other ranges available on request
DESCRIPTION
The CBES is a range of low profile compact load cells and is designed for the measurement of compressive
forces.
The CBES is equally suited for both Force Measurement and Weighing applications alike. It's compact size
means that it can be fitted in to the smallest of space envelopes and is often retrofitted. In weighing systems,
the low height gives an added benefit in that it does not increase the headroom required for vessels and is
simple to install.
The CBES as with all the other Applied Measurements sensors can be supplied complete with
monitoring/control electronics and calibrated as a system (please refer to the Instrumentation datasheets).
UK / Europe Office
Tel: +44 (0)845 9000 601
Fax: +44 (0)845 9000 602
info@omniinstruments.co.uk
www.omniinstruments.co.uk
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
info@omniinstruments.com.au
www.omniinstruments.com.au
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
info@omniinstruments.net
www.omniinstruments.net
SPECIFICATION
CHARACTERISTICS
Rated Capacities:
Rated Output:
Non-Linearity:
Hysteresis:
Repeatability:
Zero Balance:
Temperature Range Operating:
Compensated:
Temperature Effect On Output:
On Zero:
Safe Overload:
Ultimate Overload:
Excitation
Recommended:
Maximum:
Input Impedance:
Output Impedance:
Insulation Impedance:
Deflection at Rated Capacity:
Weight:
Construction:
Environmental Protection:
Cable:
Wiring Schematic Diagram
+ve Excitation
(Red)
+ve Output
(Green)
-ve Excitation
(White))
-ve Output
(Blue)
UNITS
kgf
mV/V
±% of Rated Output
% of Rated Output
±% of Rated Output
±% of Rated Output
°C
°C
±% of Applied Load/ °C
±% of Rated Output/ °C
% of Rated Capacity
% of Rated Capacity
Volts AC or DC
Volts AC or DC
Ohms
Ohms
Megaohms
mm
kg
CBES
50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000, 30000, 50000
2.0 ±0.5%
<0.15
<0.15
<0.10
<1.0
-20 to +80
-10 to +70
<0.010
<0.010
150
300
10
15
700 ± 7
700 ± 10
>2000
<0.4
See Dimensions Table
Stainless Steel
IP67
3 Metre 4 Core Screened
HT
radius R
H
ØF
ØD ØE
4 threaded holes
tapped M
CAPACITY (kgf)
50, 100, 200, 500, 1000, 2000
5000, 10,000, 20,000
30,000
50,000
ØD
59
98
115
150
ØE
10
20
32
44
All dimensions in mm
ØF
42
72
90
125
UK / Europe Office
Tel: +44 (0)845 9000 601
Fax: +44 (0)845 9000 602
info@omniinstruments.co.uk
www.omniinstruments.co.uk
H
21
35
47.5
65
HT
25
40
60
80
R
50
150
250
400
Australia / Asia Pacific Office
Tel +61 (0)282 442 363
Fax +61 (0)294 751 278
info@omniinstruments.com.au
www.omniinstruments.com.au
APPLIED MEASUREMENTS LIMITED
Continuous product development may result in minor changes to published specifications.
M
M5 x 0.8 (7 deep)
M6 x 1.0 (8 deep)
Weight
0.35 kg
2.3 kg
M12 x 1.75 (16 deep) 3.7 kg
M16 x 2.0 (20 deep)
7.5kg
USA / Canada Office
Tel +1-866-849-3441
Fax +1-866-628-8055
info@omniinstruments.net
Issue 12/05
www.omniinstruments.net