P8110 - Davis Muller Lighting

advertisement
P8110
Project Name
Quantity
Type
Specifier
Full Name
Comapny
Address
P8110 with Single Stem
P8110 with Multi-Pipe
Email
P8110 with Beaded Chain
Phone
Lamping Matrix
Lamping
Hex Tube
Compact
Fluorescent
Medium Base
CFL
(or Incandescent)*
Biaxial
Fluorescent
16"
24"
5 1/4"
(2)Q26
G24q-3
(2)H32
(2)H42
GX24q
(3) E26 CFL
or 75w Incand.*
24"
30"
5 1/2"
(4)Q26
G24q-3
(4)H32
(4)H42
GX24q
(4) E26 CFL
or 100w Incand.*
30"
36"
6 1/2"
(6)Q26
(8)Q26
G24q-3
(6)H32
(6)H42
(8)H32
(8)H42
GX24q
(8)BX13
2GX7
(3)39BX
(4)39BX
2G11
(6) E26 CFL
or 100w Incand.*
36"
36"
8 1/2"
(6)Q26
(8)Q26
G24q-3
(6)H32
(6)H42
(8)H32
(8)H42
GX24q
(8)BX13
2GX7
(3)39BX
(4)39BX
(6)39BX
2G11
(6) E26 CFL
or 150w Incand.*
Special
OVERALL HEIGHT
Nominal Overall Diffuser
Diameter Height Height
Quad Tube
Compact
Fluorescent
Consult
Factory
Use “SP”
Prefix
DIFFUSER
HEIGHT
Dimensions
NOMINAL DIAMETER
*120V only. Lower wattage incandescent lamps may be substituted, consult factory prior to specification.
Ordering Key
Mounting
- 8110
Model
P-Pendant
X-Special
-
-
-
-
-
-
-
-
Detail
Diameter
Hanger
Lamping
Options
Voltage
Overall HT
Finish
1-Small Square
2-Large Square
3-Small Round
4-Large Round
X-Special
16"
24"
30"
36"
X-Special
S-Single Stem
M-Multi-Pipe
B-Bead Chain
C-Cable
See Matrix
O-Standard
SA-Satin Acrylic
PK3-Pendant
Extension Kit †
SWV-45˚ Swivel
TCC-Top Cover-Clear
Acrylic**‡
TCW-Top Cover-White
Acrylic**‡
XDIM-Dimming*
XEMPK-Emergency
Battery Pack*
X-Special
1- 120V
2- 277V
3- 347V*
X- Special
0-Standard Height
X-Special Overall
Height
A-Will Advise
WH-White (painted)
PB-Polished Brass
SB-Satin Brass
PN-Polished Nickel
SN-Satin Nickel
AB-Architectural
Bronze
X-Special
(Stainless Steel)
X-Special
*Consult Factory Prior To Specification.
** Top Cover option is intended to shield direct view of lamp,
does not fully seal against dust, bugs and debris.
† PK3 Option required for overall heights greater than
standard. Not required for single stem.
‡Will reduce fixture efficiency/Fluorescent Only
Specifications
CONSTRUCTION
Diffuser: faux alabaster acrylic,
photography shown is natural alabaster
available upon request
Hardware: solid brass throughout
Internals: white powdercoated C.R.S.
ELECTRICAL
Quad Lamps: G24q-3, 4-pin sockets; electronic ballast(s)
HEX Lamps: GX24q, 4-pin sockets; electronic ballast(s)
BX13 Lamps: 2GX7, 4-pin sockets; electronic ballast(s)
BX39 Lamps: 2G11, 4-pin sockets; electronic ballast(s)
Incandescent Lamps: medium base porcelain sockets
CERTIFICATION
All units: UL listed dry location
Consult factory for damp location and Canadian labeling.
MOUNTING
Standard: designed for fl at horizontal ceilings using an
octagonal J-Box (by others).
Optional: max. 45° swivel for sloped ceilings and/or seismic
compliance. Mounts to an octagonal J-Box (by others).
Requires optional pendant extension kit (PK-3 ).
SUSPENSION
Standard Length: see dimensional matrix.
Non-Standard Length:
< standard length - consult factory
> standard length - requires optional pendant
extension kit. Extra 6" minimum length required.
Stems made in maximum 3 ft. lengths. Longer lengths
use couplings as required.
OAH: Overall standard height is measured from
ceiling to bottom
PHOTOMETRICS
IES Photometric fi les can be generated upon request.
Contact your sales representative.
82 Stevens Street E. Taunton MA 02718
Toll Free 800-977-4470
Fax 508-823-9431
1-Small Square
2-Large Square
3-Small Round
4-Large Round
Optional: BP-Bottom Plate
P8110 6-5-13
P
These fixture designs are copyright protected. Davis/Muller reserves
the right to change fixture design and specifications in any way that
will not significantly alter appearance or performance.
©2012 Davis/Muller Lighting
P8110
Download