cooper lighting - sure-lites

advertisement
COOPER LIGHTING - SURE-LITES ®
DESCRIPTION
The EEX Series Surface Mounted Edgelit Exit, with the Tri-Mount(TM)
System, provides an attractive, yet easy-to-install, universal edge-lit exit
sign. The crystal clear wedge shape lens panel provides excellent light
distribution, exit visibility and quick snap-in installation. Long life, energy
efficient LED lamps reduce energy costs and eliminate routine lamp
maintenance. The under-five-minute installation time makes it the fastest
installed Edgelit Exit on the market today.
Type
Catalog #
Project
Date
Comments
Prepared by
S P E C I F I C AT I O N F E AT U R E S
- Exit can be universally surface
mounted, ceiling, wall, or end,
with Tri-Mount(TM) System
- Universal J-box mounting pattern
E l e c t ri c a l
- Dual Voltage Input
120/277 VAC, 60Hz
- Optional 2C (two circuit)
available
Tri m Pa n e l
- Injection molded, high impact,
clear acrylic panel. Reinforcing
rib secures Snap-in installation
- Bright red or bright deep green
letter colors
- Universal, Field Installable
Chevrons in bright red or deep
green colors
- Mirror and white insert
background included with single
or double face exits
- Edge reflector for optimized
efficiency and visibility
H o u s i n g C o n s t ru c t i o n
- All components are injection
molded, color stable, high
impact UL 94-5VA rated
polycarbonate material
- Designer white textured finish
standard
- Components are of snap-fit
construction to facilitate
under 5-minute installation
- Reinforcing ribs throughout
to provide maximum strength
- All components are located
inside the exit housing and
canopy
- Snap-fit canopy with captive
mounting screw included with
all exits
Code Compliance
- UL 924 Listed
- AC Damp Location Listed
- UL Listed for floor proximity
- UL Listed for Two Circuit (FTBR)
- Life Safety NFPA 101
- CSA Certified
- NEC/OSHA
- Most State and Local Codes
- Patent No. 6,241,369
Wa rra n t y
- Exit: 1-year
L a m p Da t a
- AC LED: Long-life LED lamps
provide uniform diffused
illumination
- DC LED: LED DC lamps
EEX
SERIES
EDGE-LIT EXITS
AC O N LY
EMERGENCY
LED LAMPS
EXIT LIGHTING
O R D E R I N G I N F O R M AT I O N
SAMPLE NUMBER: EEX71R
Family
EEX=Edge-lit Exit
Series
Face Options
1=Single Face
2=Double Face
Series
6=LED Lamps, AC Only
Battery
Blank=No Battery
Housing Trim
Finish
Blank=White Only
Letter/Background Color 1
R=Red
G=Green
Chevron Direction
Blank=Universal
Stick-On
Chevrons
Accessories
(Order Separately)
WG=Choose size of wire
guard desired from
accessories sheet
Options
2C 2 =Two Circuit
Option - FTBR
HOUSING SAMPLE NUMBER: EH6R
E N E R G Y D ATA
Charge Mode (Fully Discharged Battery):
Sealed Nickel Cadmium
Battery
LED Exits -
LED Exits - Red
Input Power:
120V = 6.5W
277V = 6.6W
EH
6
Input Current (Max.):
120V = .08A
277V = .04A
Family
EH= Housing
Series
6= AC only
Housing Trim Finish
Blank = White only
LED Color
R=Red
G=Green
Options
2C=Two Circuit Option (FTBR)
Power Factor:
120V = >.67
277V = >.66
T.H.D.:
TRIM SAMPLE NUMBER: ET1R
120V = <41%
277V = <43%
LED Exits -
ET
Green
Input Power:
120V = 4.0W
Family
ET=Exit Lens Panel
Face Options
1=Single Face
1=Double Face
Letter/Background Color 1
R=Red/Clear
G=Green/Clear
Chevron Direction
Blank=Universal Stick-On Chevrons
277V = 4.1W
Input Current (Max.):
120V = .07A
NOTES:
277V = .03A
Special wording available; consult Cooper Lighting Representative.
Power Factor:
1 Universal background clear, white insert and mirror insert included.
2 Universal 120/277 normal and 120/277V emergency.
120V = > .47
277V = > .47
T.H.D.:
120V = < 48%
277V = < 50%
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADX041057 pc
2010-08-06 09:11:33
EEX SERIES - AC ONLY LED
T E C H N I C A L DATA
Lamps
Tri m Pa n e l
Wa rra n t y
The EEX Series Exits use energy efficient, longlife LEDs to provide uniform diffuse
illumination of the exit face. These red and
green LEDs require no maintenance. The low
operating costs and zero maintenance
requirement make LED lamps the wisest choice
for exit signs today. Emergency illumination is
provided by LED lamps.
Trim panels for self-powered versions of the
EEX Series Edgelit Exits are injection-molded
from impact-resistant clear acrylic. A choice of
red or green letter colors and clear, mirror or
white drop-in background inserts enable
precise control of the fixtures aesthetic
appearance. Universal, field-installable
chevrons are provided in bright red or deep
green colors allowing for universal
configuration of the exit sign based on the
directional needs of the application. The edge
reflector further enhances visibility. Snap-in
feature reduces installation time.
All Sure-Lites' products are backed by a firm,
one-year warranty against defects in material
and workmanship. Maintenance-free, long-life,
sealed nickel cadmium batteries carry a fifteenyear pro-rata warranty.
H o u s i n g C o n s t ru c t i o n
Rugged, durable, injection- molded
polycarbonate materials are used throughout
the EEX Series Exits. All structural components
are designed with reinforcing ribs to add
additional rigidity and to maximize structural
integrity. These materials are impact- and
scratch-resistant, and they have been UV
stabilized to resist discoloration due to age and
ultraviolet radiation. All components are
designed to be of snap-fit construction to
facilitate installation in under 5-minutes. EEX
Series Exits can be wall-, ceiling- or endmounted. A rugged, snap-fit, low-profile canopy
with captive screw is included with every exit.
MOUNTING OPTIONS
Ceiling Mount
Wall Mount
14 3/4” [375mm]
End Mount
16 5/8” [422mm]
14 3/4” [375mm]
6” [152mm]
1 7/8”
[48mm]
13” [330mm]
13” [330mm]
13” [330mm]
5”
[127mm]
3 7/8”
[98mm]
1 7/8”
[48mm]
10 5/8”
[270mm]
5”
[127mm]
6”
[152mm]
11 3/16”
[284mm]
[11 1/8”
[283mm]
7 1/8”
[181mm]
7 1/8”
[181mm]
1/2” [13mm]
Specifications and dimensions subject to change without notice.
Sure-Lites • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL 770.486.4800 • FAX 770.486.4801
ADX041057 pc
2010-08-06 09:11:33
Download