Sentry Elite - ALP Lighting Components

Introducing LED Sentry Elite™

The next generation in durable, vaportight LED fixture kits for the harshest environments. No application is too challenging!

2’ and 4’ Lengths

Injection molded optical lens for DLC

Parking Garage requirements

Multiple lens choices including clear,

Lumieo ® , frost acrylic and polycarbonate

Flush fixed latches with “double lock” functionality

Slim, low profile design for contemporary look and overall value

All body/lens configurations under 4”

Cost-effective gear tray format

Compatible with occupancy sensors and building controls

Sturdy UL94 5VA and UL746 f1 rated housing

IP65, IP66 and IP67 rated

Surface or suspended mounting

Easy assembly, installation and maintenance

Represented by

For more info please contact us at: sentryelite@alplighting.com

Captive latch flush mounted

Multiple lens choices

(Frost Acrylic Shown)

20% wider gasket channel

6333 Gross Point Road, Niles, IL 60714

Ph: (877) 257-5841 | Fx: (773) 774-9331 www.alplighting.com

2SNGPG50 parking garage lens, DC-2A die cast end plug & LSNG White Celcon plastic latches shown.

Description

Sentry Elite™ LED combines the benefits of LED technology with the features OEMs have come to rely upon in the flagship

Sentry series. Sentry Elite LED utilizes gear tray internal construction for cost effectiveness and functional practicality by minimizing required internal metal components. Drivers mount to the driver tray for thermal isolation. The Sentry

Elite housing is sealed against dust and moisture and available in a variety of lens, latch, and wire-entry configurations.

Applications

Ideal for use in dusty, dirty, or wet environments including food processing, cold storage, kitchens, parking garages, car washes, covered canopies, pedestrian tunnels, concourses, and industrial.

Certifications

• UL/cUL recognized component

• Wet Location listed

• IP65, IP66 and IP67

• 40° C ambient temperature rating when used with LGIT light engines.

• NSF International certified for NSF/

ANSI Standard 2 – Food Equipment

Features

• Rigid one piece housing construction.

• Two 1/4-28 brass studs molded into back of housing for attachment of optional mounting brackets.

• En-seal™ gasketing provides superior resistance to moisture absorption versus conventional gasketing.

• Lens retained by six captive flush mounted latches.

• Molded latch pockets compatible with standard and tamper-proof latches in

Celcon, and stainless steel.

• Gear trays secured to #10-32 brass studs molded into housing via threaded hex steel mounting standoffs.

• LED Module tray available for two rows of nominal 22” LED boards.

• LED Gear Trays attached to two hex metal standoffs which heat sink the gear tray to the driver tray.

• LED Module tray suspends from housing by two security straps during servicing.

Sentry Elite™

2’ LED Gear Tray Type

LED Light Engine Lumens

Driver

LED Module

LGITDRV37WC201R (1)

LGITLED1-28-40K (2)

2841 lm, 28.989W, 98lm/W

Housing

Compression molded self-extinguishing fiberglass reinforced polyester compound with UL 5V flame rating (ASTM D635-74).

F1 weatherability rating.

Gasketing

En-Seal ™ continuous perimeter poured gasket assures lens seal to housing.

Electrical Chassis

Gear trays constructed of minimum 83% reflective, 22-gauge, pre-painted steel.

Light Engine

28 chip LED module available in 3500K,

4000K and 5000K from LGIT with 50,000 hour L70 life. Constant current drivers with 0-10V dimming and 120-277V input available from LGIT.

Conduit Entry

Standard housings available with one 7/8” conduit entry point on either or both ends.

Consult Sales for other opening sizes or for top openings.

Lens

Inline thermoformed low profile lenses available in 50% DR acrylic in clear, Lumieo, and frost. Lenses for parking garage applications available in 50% DR acrylic and polycarbonate.

Mounting

Standard 316 stainless steel straps (SBRKT-

SNG-2PK) for surface of all-thread pendant mounting, or optional flush mounting bracket. That serves as a mounting point for either a snap-in-place mount or a hook.

Consult A.L.P. Sales for cable mounting options.

Please contact A.L.P. for pricing and delivery.

All specifications subject to change without notice.

A.L.P. assumes no responsibility for these materials in any luminaire or application.

The product is an OEM component kit requiring final assembly by a qualified OEM fixture manufacturer.

A.L.P.


Ph: (877) 257-5841 • Fx: (773) 774-9331 www.alplighting.com

© 2016 A.L.P. Lighting Components, Inc.

Sheet/REV# SENTRYELITE VN092116

Exploded View Parking Garage Type

LTP0888 Liquid-Tight Plug

(optional)

2’ 5VA Rated Housing: 2SE

LSNG Plastic Latch (6)

Driver Tray:

SENTDT2-LED

Security Strap:

LANYARD (2)

Ground Washer-Cup

Ground Screw:

SCR8GND

LED Parking

Garage Gear Tray:

SENTGT2P45C

0510-A249

NUT1001

LED Board

Driver

Cap off

Dimming Leads

Standoff-SNG (2)

SCR4001

Parking Garage Lens:

2SNGPGXX or 2SNGPGPX

Dimensions Parking Garage Type

A

5.82

Section A-A

A

3.68

25.64

Sentry Elite™


LED light source and luminaire specifications

Sentry Elite 2’ Parking Garage Kit

Specification

Input Wattage

2’ Sentry

28.989

Delivered Lumens (lms)

Efficacy (LpW)

2841

98

Color Rendering Index (CRI)

Color Temperature (CCT) k

Dimming

Rated Life (L70)

Warranty

Voltage (V)

Operating Frequency (Hz)

UL

FCC

84.4

4192

0-10v

50000

5 years

120-277v

50/60

Yes

Compliant

2SNGPG50

Parking Garage Lens Acrylic

2SNGPGPC

Parking Garage Lens Polycarbonate

A.L.P.



Notice

A.L.P. assumes no responsibility for suitability of these materials in any luminaire or application. Please test for fit and function prior to ordering project quantities.

While A.L.P. utilizes IESNA testing procedures and believes our testing results to be accurate, A.L.P. provides photometry for reference only. Actual results will vary based on the actual light source(s) and power source(s) used, i.e. ballast, driver, generator, etc. and the combinations in which they are used, as well as operating temperatures, and other electrical and environmental variables. We urge that customers perform their own fixture qualifications prior to making performance-based claims. In no event will A.L.P. be liable for any loss or damage, including without limitation, indirect or consequential loss or damage in connection with the use of this information.



Exploded View Low Bay Type


(Optional)



Driver Tray:

SENTDT2-LED

Security Strap:

LANYARD (2)

Ground Washer-Cup

Ground Screw:

SCR8GND

Flat Gear Tray:

SENTGT2F-LED

Lens:

2TFLSXX

0510-A249

NUT1001

LED Board

Driver

SCR4001

Cap off

Dimming Leads

Standoff-SNG (2)

Sentry Elite™




Specification

Input Wattage

2’ Sentry

28.70


Efficacy (LpW)

2900.2

101.05



Dimming

Rated Life (L70)

Warranty

Voltage (V)


UL

FCC

83.82

4074

0-10v

50000

5 years

120-277v

50/60

Yes

Compliant

Dimensions Low Bay Type

A

A

5.82

Section A-A

3.09

25.64

2TFSC5

Acrylic Clear Low Profile Lens

2TFSL5

Lumieo® Low Profile Lens

A.L.P.



Notice





HOUSING (Select One) Contact Sales to order housing with top holes, 1-1/8” or 1-1/4” holes

Part Number Description IP Rating End Wiring Holes

2SE-2

GEAR TRAY (Select one)

2’ Sentry Elite 5VA Housing IP65/66/67 7/8” on both ends

Part Number

SENTGT2F-LED

Description

2’ Sentry Elite 2-board LED module gear tray

SENTGT2P45C 2’ Sentry Elite 2-board angled gear tray for parking garage

LED DRIVER GEAR TRAY (Select one)

Part Number Description

SENTDT2-LED 2’ Sentry Elite LED driver gear tray

LATCHES (Six required for the 2SE housing)


LSNG White Celcon plastic latch

LSNG-TP

LSS-4

LSS-4TP

Tamper-proof white Celcon latch with nut and screw

316 Stainless steel latch 5

Tamper-proof 316 stainless steel latch with nut and screw 5

WIRE ENTRY PLUGS (Select none, one or two depending on housing selected)


FEPW White 7/8” dry location plug

LTP088

DC-2A

LTF-01 Bulk Kit

LENS (Select one)

Part Number

White 7/8” liquid tight plug - not IP rated

7/8” die cast aluminum fitting assembly for 1/2” rigid conduit 1

7/8” liquid tight power cord fitting

Description

2TFLSC5

2TFLSL5

2SNGPG50

2’ shallow clear low profile lens; 50% DR

2’ shallow Lumieo low profile lens; 50% DR; LT=74%

2’ clear parking garage lens; 50% DR

2SNGPGPC 2’ clear parking garage lens; Polycarbonate

OPTIONAL HOUSING MOUNTING BRACKET (Select one)


SBRKT-SNG-2PK

MBRKT-SNG-2PK

Sentry Elite 316 SS strap bracket, 2-pack

316 SS external stud mounting Part #2 of 2 for flush mount

HOOK-SNG-2PK 316 SS hook Part #2 of 2 for suspension mounting

MISCELLANEOUS PARTS


STANDOFF-SNG-2PK Hex machined standoff with Nut, 2-Pack 2,3

LANYARD White Celcon security strap, 2-pack

SCR4001 #4-40 x .250” LED board screws (4 required per 2’ LED board)

SCR8GND #8-32x3/8” green ground screw

OPTIONAL LED DRIVERS (Select one)


LGITDRV37WC201R LGIT 37W, 520mA driver. 120-277V, 0-10V dim.

2’ LED MODULES (Select LED board color temparature; two of selected color required)


LGITLED-1-28-35K

LGITLED-1-28-40K

LGIT 28 LED, 3500K Board 4

LGIT 28 LED, 4000K Board 4

LGITLED-1-28-50K LGIT 28 LED, 5000K Board

OPTIONAL ACCESSORIES

4


TAMPER BIT 3 Driver bit for TAMPERPRUF screw used in LSNG-TP and LSS-4TP

Ordering Notes:

1. Apply silicone sealant to internal threads for wet location use

2. Requires NUT1001 nut.

3. Two required

4. 3000K, 3500K and 5000K CCT available by special order. See Customer Service

5. Stainless steel latch is not NSF Listed

Quantities are one each unless otherwise indicated.

Qty/Case

35

Qty/Case

500

500

Qty/Case

250

Qty/Case

35

35

35

35

Qty/Case

80

-

100

A.L.P.



Sentry Elite™


GEAR TRAYS*

SENTRYGT2U-LED

SENTGT2P45C

DRIVER TRAY*

SENTDT2-LED

LATCHES

LSNG

WIRE ENTRY PLUGS

LENSES

DC-2A

LTP088

2SNGPG50

HOUSING MOUNTING BRACKETS

SBRKT-SNG-2PK

*LED Boards not included

*LED Driver not included

MBRKT-SNG-2PK


STANDOFF-SNG-2PK


LANYARD

TAMPER BIT 3



LSS-4

FEPW

2TFLSL5

HOOK-SNG-2PK

Description

Sentry Elite™ LED combines the benefits of LED technology with the features OEMs have come to rely upon in the flagship

Sentry series. Sentry Elite LED utilizes gear tray internal construction for cost effectiveness and functional practicality by minimizing required internal metal components. Drivers mount to the driver tray for thermal isolation. The Sentry

Elite housing is sealed against dust and moisture and available in a variety of lens, latch, and wire-entry configurations.

Applications

2SNGPG50 parking garage lens, DC-2A die cast end plug & LSS-4 stainless steel latches shown.

Ideal for use in dusty, dirty, or wet environments including food processing, cold storage, kitchens, parking garages, car washes, covered canopies, pedestrian tunnels, concourses, and industrial.

Certifications

• UL/cUL recognized component

• Wet Location listed

• IP65, IP66 and IP67

• 40° C ambient temperature rating when used with LGIT light engines.

• NSF International certified for NSF/

ANSI Standard 2 – Food Equipment

Features

• Rigid one piece housing construction.

• Two 1/4-28 brass studs molded into back of housing for attachment of optional mounting brackets.

• En-seal™ gasketing provides superior resistance to moisture absorption versus conventional gasketing.

• Lens retained by eight captive flush mounted latches.

• Molded latch pockets compatible with standard and tamper-proof latches in

Celcon, and stainless steel.

• Gear trays secured to #10-32 brass studs molded into housing via threaded hex steel mounting standoffs.

• LED Module tray available for four rows of nominal 22” LED boards.

• LED Gear Trays attached to two hex metal standoffs which heat sink the gear tray to the driver tray.

• LED Module tray suspends from housing by two security straps during servicing.

Sentry Elite™


LED Light Engine Lumens

Driver

LED Module

LGITDRV48WX048A (1)

LGITLED-1-28-40K (4)

4686.3 lm, 48.567W, 96.5lm/W

Housing

Compression molded self-extinguishing fiberglass reinforced polyester compound with UL 5V flame rating (ASTM D635-74).

F1 weatherability rating.

Gasketing

En-Seal ™ continuous perimeter poured gasket assures lens seal to housing.

Electrical Chassis

Gear trays constructed of minimum 83% reflective, 22-gauge, pre-painted steel.

Light Engine

28 chip LED module available in 3500K,

4000K and 5000K from LGIT with 50,000 hour L70 life. Constant current drivers with 0-10V dimming and 120-277V input available from LGIT.

Conduit Entry

Standard housings available with one 7/8” conduit entry point on either or both ends.

Consult Sales for other opening sizes or for top openings.

Lens

Inline thermoformed low profile lenses available in 50% DR acrylic in clear, Lumieo, and frost. Lenses for parking garage applications available in 50% DR acrylic and polycarbonate.

Mounting

Standard 316 stainless steel straps (SBRKT-

SNG-2PK) for surface of all-thread pendant mounting, or optional flush mounting bracket. That serves as a mounting point for either a snap-in-place mount or a hook.

Consult A.L.P. Sales for cable mounting options.

Please contact A.L.P. for pricing and delivery.

All specifications subject to change without notice.

A.L.P. assumes no responsibility for these materials in any luminaire or application.

The product is an OEM component kit requiring final assembly by a qualified OEM fixture manufacturer.

A.L.P.




Sheet/REV# SENTRY4LED VN092116

Sentry Elite™


Exploded View Parking Garage Type


(Optional)


Driver Tray:

SENTDT4-LED

Ground Washer-Cup

Ground Screw:

SCR8GND

LED Parking

Garage Gear Tray:

SENTGT2P45C

Standoff-SNG (2)

0510-A249

SCR4001

Driver

Parking Garage Lens:

4SNGPGXX or 4SNGPGPX

Board


Cap off Dimming Leads

Security Strap:

LANYARD (2)

NUT1001



Specification

Input Wattage

4’ Sentry

48.56


Efficacy (LpW)

4686.3

96.5



Dimming

Rated Life (L70)

Warranty

Voltage (V)


UL

FCC

85

4162

0-10v

50000

5 years

120-277v

50/60

Yes

Compliant

Dimensions Parking Garage Type

A

5.82

A

3.68

47.14

Section A-A

4SNGPG50

Parking Garage Lens Acrylic

4SNGPGPC

Parking Garage Lens Polycarbonate

A.L.P.



Notice





Exploded View Low Profile Type


(optional)


Driver Tray:

SENTDT4-LED

Ground Washer-Cup

Ground Screw:

SCR8GND

Flat Gear Tray:

SENTGT4F-LED

Standoff-SNG (2)

0510-A249

Driver

Lens:

4TFLSXX

Dimensions Low Bay Type

A

A

Sentry Elite™



Cap off Dimming Leads Security Strap:

LANYARD (2)

NUT1001



Specification

Input Wattage

4’ Sentry

48.70


Efficacy (LpW)

4807.1

98.71



Dimming

Rated Life (L70)

Warranty

Voltage (V)


UL

FCC

83.90

4086

0-10v

50000

5 years

120-277v

50/60

Yes

Compliant

5.82

3.09

47.14

Section A-A

4TFSC5

Acrylic Clear Low Profile Lens

4TFSL5

Lumieo® Low Profile Lens

A.L.P.



Notice





HOUSING (Select One) Contact Sales to order housing with top holes, 1-1/8” or 1-1/4” holes

Part Number Description IP Rating End Wiring Holes

4SE-2 4’ Sentry Elite 5VA Housing IP65/66/67

LED MODULE GEAR TRAY (Select one)

7/8” Both ends

Part Number

SENTGT4F-LED

Description

4’ Sentry Elite 2-board LED module gear tray

SENTGT4P45C 4’ Sentry Elite 2-board angled gear tray for parking garage

LED DRIVER GEAR TRAY (Select one)


SENTDT4-LED 4’ Sentry Elite LED driver gear tray

LATCHES (Eight required for the 4SE housing)


LSNG

LSNG-TP

LSS-4

White Celcon plastic latch

Tamper-proof white Celcon latch with nut and screw

316 Stainless steel latch 5

LSS-4TP Tamper-proof 316 stainless steel latch with nut and screw

WIRE ENTRY PLUGS (Select none, one or two depending on housing selected)

5

Part Number

FEPW

Description

White 7/8” dry location plug

LTP088

DC-2A

White 7/8” liquid tight plug - not IP rated

7/8” die cast aluminum fitting assembly for 1/2” rigid conduit 1

7/8” liquid tight power cord fitting LTF-01 Bulk Kit

LENS (Select one)

Part Number

4TFLSC5

4TFLSL5

4SNGPG50

4SNGPGPC

Description

4’ shallow clear low profile lens; 50% DR

4’ shallow Lumieo low profile lens; 50% DR; LT=74%

4’ clear parking garage lens; 50% DR

4’ clear parking garage lens; Polycarbonate

OPTIONAL HOUSING MOUNTING BRACKET (Select one)


SBRKT-SNG-2PK

MBRKT-SNG-2PK

Sentry Elite 316 SS strap bracket, 2-pack

316 SS external stud mounting Part #2 of 2 for flush mount

HOOK-SNG-2PK


316 SS hook Part #2 of 2 for suspension mounting


STANDOFF-SNG-2PK Hex machined standoff w/ Nut - 2 Pack 2,3

LANYARD White Celcon security strap, 2-pack

SCR4001

SCR8GND

#4-40 x .250” LED board screws (4 required per 2’ LED board)

#8-32x3/8” green ground screw

OPTIONAL LED DRIVERS (Select one)


LGITDRV48WX048A LGIT 48W, 400mA driver. 120-277V, 0-10V dim.

2’ LED MODULES (Select LED board color temparature; four of selected color required)


LGITLED-1-28-35K

LGITLED-1-28-40K

LGIT 28 LED, 3500K Board

LGIT 28 LED, 4000K Board

4

4

LGITLED-1-28-50K LGIT 28 LED, 5000K Board


4


TAMPER BIT 3 Driver bit for TAMPERPRUF screw used in LSNG-TP and LSS-4TP

Ordering Notes:

1. Apply silicone sealant to internal threads for wet location use

2. Requires NUT1001 nut.

3. Two required

4. 3000K, 3500K and 5000K CCT available by special order. See Customer Service

5. Stainless steel latch is not NSF Listed

Quantities are one each unless otherwise indicated.

A.L.P.



Qty/Case

35

Qty/Case

500

500

Qty/Case

250

Sentry Elite™


GEAR TRAYS*

SENTGT4F-LED

SENTGT4P45C

DRIVER TRAY*

*LED Boards not included

*LED Driver not included

SENTDT2-LED

LATCHES

LSNG Qty/Case

50

30

20

30

Qty/Case

80

-

100

WIRE ENTRY PLUGS

DC-2A

LTP088

LENSES

LSS-4

FEPW

4SNGPG50

HOUSING MOUNTING BRACKETS

4TFLSL5

SBRKT-SNG-2PK

MBRKT-SNG-2PK


STANDOFF-SNG-2PK


LANYARD

TAMPER BIT 3



HOOK-SNG-2PK

Sentry Elite - ALP Lighting Components

Introducing LED Sentry Elite™

The next generation in durable, vaportight LED fixture kits for the harshest environments. No application is too challenging!

Related documents

Products

Support

Sentry Elite - ALP Lighting Components

Introducing LED Sentry Elite™

The next generation in durable, vaportight LED fixture kits for the harshest environments. No application is too challenging!

Related documents

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib