Spec Sheet

advertisement
PROJECT INFORMATION
Job Name
ENVIROPRO® TEKDEK™ LED
Fixture Type
EPTD17 SERIES
Catalog Number
PRODUCT FEATURES:
Approved by
»»Ceiling mount – 17" diameter
»»Sealed optics with uplight feature eliminating “cave effect”
»»Textured lens for unprecedented glare reduction
»»Up to 100 lumens/Watt
»»Equivalent to 175W MH output
SPECIFICATIONS:
HOUSING: Marine-grade die-cast aluminum and UV-stabilized polycarbonate construction. Standard TGIC polyester power coat finish on aluminum components with five-step pre-treatment to
withstand 1,000 hour salt spray test per ASTM B117. See Ordering Information for available finishes. Closed-cell silicone gasketing seals all housing component interfaces. Die-cut closed-cell
neoprene self-adhesive gasket seals housing to mounting surface (DTS).
MOUNTING: Direct-to-surface (DTS) mounting over recessed junction box, Trunnion Mount (TK) or pendant-mounted (PM) via ¾” rigid sealed conduit. See Ordering Information for selection.
Housing access secured via tamper-resistant Torx™ fasteners.
OPTICAL: Type V-Narrow or V-Square roadway distributions available. UV-stabilized, high-impact resistant injection-molded clear textured 100% DR acrylic or polycarbonate tertiary lens.
ELECTRICAL: Serviceable high-brightness LED array. See Ordering Information for color temperature and CRI options. 70 CRI minimum. 120-277 VAC, 347VAC and 480VAC 50/60Hz single-phase
input; constant-current dimming driver; <20% THD, >0.90 PF. Minimum 90% electrical efficiency. 0-10V dimming protocol with 0-100% range, 0.6mA source current. Replaceable surge suppressor
rated to 20kA/kV per IEEE/ANSI C62.41 Cat. A. EMC compliant with FCC 47 CFR Part 15, Class B. Passes IEC 61000-4-4 EFT and IEC 61000-4-5 (Class 4) surge evaluation.
TEKLINK™ TL50: An independent lighting control system integral to the luminaire, featuring its own occupancy sensor, daylight harvesting and adjustable time-out/dimming settings.
TEKLINK™ TL1000/2000: An adaptive lighting control system with wired or wireless communication between system nodes. In addition to occupancy detection and daylight harvesting, TL1000
and TL2000 feature advanced scheduling and energy management capabilities with cloud-based management of system settings, reporting and notifications. Meets CA Title 24-2013 and ASHRAE
90.1-2013 requirements.
PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric data, please go to www.kenall.com.
WARRANTY: Limited ten (10) year warranty. Peace of Mind Guarantee™ when ordered and installed with direct-to-surface (DTS) mounting and polycarbonate lens (TP).
LISTINGS: Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 rating per IEC 60598. Suitable for installation into -40°C to 40°C ambient environments,
unless otherwise noted. Product listed on DesignLights Consortium® Qualified Product List. Check the latest version here for listed configuration details.
LED
IP65
POLYCARBONATE LENS &
DIRECT SURFACE MOUNT ONLY
ORDERING INFORMATION (Ex: EPTD17-PM-4-TP-MB-104L-40K7-DV)
Model
Mounting
Dist. Type
Lens Type
Finish
Lamp Power
Lamp Color
EPTD17
Driver Type
Voltage
Options
DCC
Mounting
DTS* Direct-to-Surface
QMQuick Mount
PM Pendant Mount
Distribution Type
5N Type V – Narrow Round
5S Type V – Wide Square
Lens Type
TA▲ Textured Acrylic
(n/a for freezer applications)
TP* Textured Polycarbonate
Finish
DB
Dark Bronze
FG
Forest Green
GW
Reflectance White
LG
Light Gray
MB
Matte Black
MW
Matte White
SLSilver
CC
Custom Color (Consult factory)
Lamp Power
49L
49W LED
75L
75W LED
104L
104W LED
Lamp Color
30K8 3000K/80CRI min
35K8 3500K/80CRI min
40K8 4000K/80CRI min
40K7 4000K/70CRI min
50K7 5000K/70CRI min
57K7 5700K/70CRI min
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
Driver Type
DCC
0-10V Dimming Constant Current
Voltage
DV 120-277 Volts
347 347 Volts (60Hz, 25° C ambient only)
Options
LEL• Emergency Battery Pack (32°F, minimum ambient)
(Click here for specifications)
PH▲ Phillips Fasteners (4)
R80 Minimum 80 CRI Lamp (4000K only)
*Required for Peace of Mind Guarantee®
▲
n/a with Peace of Mind Guarantee
• n/a with QM Mounting
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
EPTD17--042215
For additional photometry, go to www.kenall.com
ENVIROPRO® TEKDEK™ LED
EPTD17 SERIES
PERFORMANCE
Initial Delivered Lumens, By Optic Type (lm)
Lamp Code
5S-TA
5S-TP
5N-TA
5N-TP
Efficacy
(lm/W)
Input Power
(W)
Estd. L70
LED Life (Hrs)
49L-57K7
6,658
6,520
7,178
7,151
116 - 128
56
150,000
49L-50K7
6,658
6,520
7,178
7,151
116 - 128
56
150,000
49L-40K7
6,658
6,520
7,178
7,151
116 - 128
56
150,000
49L-40K8
5,920
5,797
6,383
6,358
104 - 114
56
150,000
49L-35K8
5,624
5,507
6,064
6,040
98 - 108
56
150,000
49L-30K8
5,624
5,507
6,064
6,040
98 - 108
56
150,000
75L-57K7
8,935
8,750
9,634
9,596
108 - 119
81
125,000
75L-50K7
8,935
8,750
9,634
9,596
108 - 119
81
125,000
75L-40K7
8,935
8,750
9,634
9,596
108 - 119
81
125,000
75L-40K8
7,945
7,780
8,566
8,533
96 - 106
81
125,000
75L-35K8
7,547
7,391
8,138
8,106
91 - 100
81
125,000
75L-30K8
7,547
7,391
8,138
8,106
91 - 100
81
125,000
104L-57K7
10,638
10,418
11,470
11,426
92 - 102
113
110,000
104L-50K7
10,638
10,418
11,470
11,426
92 - 102
113
110,000
104L-40K7
10,638
10,418
11,470
11,426
92 - 102
113
110,000
104L-40K8
9,459
9,263
10,199
10,159
82 - 90
113
110,000
104L-35K8
8,986
8,800
9,689
9,651
78 - 86
113
110,000
104L-30K8
8,986
8,800
9,689
9,651
78 - 86
113
110,000
Displayed information is for selected luminaires only. Information subject to change without notice. Visit www.kenall.com for .ies files and additional information.
Model: EPTD17-XX-5S-TA-GW-104L-40K7-DCC-DV
4137
3103
2
2069
1034
1
Max Candela = 4137 Located At Horizontal Angle = 45, Vertical Angle = 60
DIMENSIONAL DATA
.312" Dia.
1 - Vertical Plane Through Horizontal Angles (45 - 225) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (60) (Through Max. Cd.)
TOP VIEW
17.00"
*5.50"
CROSS SECTION
17.00"
3/4 NPS
1.37"
9.00"
*5.50"
9.31"
*DTS Mounting Only
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
EPTD17-LED-042215
Download