InstaRack™ LAN Logistics & Accessories 1 InstaRack™ logistic data............................................................................................................ 3 2 InstaRack™ LAN + Accessories EAN codes................................................................................. 4 3 Accessories................................................................................................................................ 6 2 1 InstaRack™ logistic data InstaRack™ LAN Rack Type Gross Dimensions (height x width x depth – incl. palette) Gross Weight 4 x type 1 racks on 1 palette 4 x type 2 racks on 1 palette 4 x type 3 racks on 1 palette 4 x type 4 racks on 1 palette 2260 x 2270 x 900 2260 x 2270 x 900 2260 x 2270 x 900 2260 x 2270 x 900 550 kg 600 kg 600 kg 650 kg InstaRack LAN Racks single carton without palette (all 4x rack types) Gross Dimensions (height x width x depth – without palette) Gross Weight Typ 1 Typ 2 Typ 3 Typ 4 530 x 2230 x 860 530 x 2230 x 860 530 x 2230 x 860 530 x 2230 x 860 132 kg 137 kg 137 kg 145 kg 3 2 InstaRack™ LAN + Accessories EAN codes EAN Code 4 Part-No. Description 011500041006 EAN Code Part-No. Description InstaRack LAN Flat Pack 800x2000x800 WxHxD 011500179001 Earthing set for InstaRack 011500041007 InstaRack LAN Flat Pack 800x2000x1000 WxHxD 011500201001 Cable Routing Board, 1U 011500041011 InstaRack LAN Flat Pack 800x2200x800 WxHxD 011500211001 Fiper Optic Cable Routing Board, 1U 011500041012 InstaRack LAN Flat Pack 800x2200x1000 WxHxD 011500221001 Cover for Cable Routing Board 011501041006 InstaRack LAN assembled 800x2000x800 WxHxD 011500231001 Cable Tray 011501041007 InstaRack LAN assembled 800x2000x1000 WxHxD 011500231002 Cable Tray 011501041011 InstaRack LAN assembled 800x2200x800 WxHxD 011500241001 19" Cable tray 011501041012 InstaRack LAN assembled 800x2200x1000 WxHxD 011500259001 Square Jumpering Bracket EAN Code Part-No. Description 011500270001 EAN Code Part-No. Description Cable Cantilever 011500320005 InstaRack Bottom Cover closed for useful depth 644,5 011500280001 Hook-IN chassis runner useful depth 544,5 mm 011500320006 InstaRack Bottom Cover closed for useful depth 744,5 011500280002 Hook-IN chassis runner useful depth 644,5 mm 011500401005 InstaRack Plinth Stationary, Height 100 mm B 800, T 800 011500280003 Hook-IN chassis runner useful depth 744,5 mm 011500401006 InstaRack Plinth Stationary, Height 100 mm B 800, T 1000 011500451001 Fan Unit Thermostat 3 Fans 011500299001 Brush strip L 436 mm 011500461001 Fan Unit Speed Controlled SP 3 Fans 011500299002 Brush strip L 636 mm 011500471001 Fan Unit Speed Controlled HP 3 Fans 011500320004 InstaRack Bottom Cover closed for useful depth 544,5 5 3 Accessories Part-No. 011500179001 Image Description ECAT Long Description Earthing set for InstaRack – For Earthing Top Cover/ Side Panel and doors – With central earthing bolt Supply schedule:earthlines washes screews earthing bolt Supplied as: Set of 20 units 011500201001 Cable Routing Board, 1U – For orderly cable routing – For safe and secure cable routing of copper and fiberglass cables Supply shedule: 19" Front panel cable routers Material/finish: Front panel, sheet steel 1,5 mm, powder-coated, RAL7035 light grey Supplied as:Preassembled Set of 20 units 011500211001 Fiper Optic Cable Routing Board, 1U – For orderly cable routing – For safe and secure cable routing of fiberglass cables – Optionally with cover panels to Protect the cables and as labling option Supply schedule: cable routing board Material/finish: Sheet steel, 1,5 mm, powder-coated texture, RAL7035 light grey Supplied as: Set of 10 units 011500221001 Cover for Cable Routing Board – Cover for Cable Routing Board Supply schedule:Cover Finish: Powder-coated, RAL7035 light grey Supplied as: Set of 10 units 6 Part-No. 011500231001 011500231002 Image Description ECAT Long Description Cable Tray for InstaRack – For orderly cable management in the InstaRack – Cable fixing possible using Velco strips or cable ties Supply schedule: cable tray mounting material Material/finish: Sheet steel 1,5 mm, zinc passivated, powder-coated Supplied as: Set of 10 units H 2000 2200 011500241001 W 150 150 19" Cable tray Model For InstaRack For InstaRack Order no. 011500231001 011500231002 UP Set of 10 Units Set of 10 Units – For orderly cable management in front ot the 192 front – Cable fixing possible using Velco strips or cable ties – Mounting on front panels possible Supply schedule: cable tray Material/finish: Sheet steel 1,5 mm, powder-coated texture, RAL7035 light grey Supplied as: Set of 10 units 011500259001 Square Jumpering Bracket – For orderly cable management – Open version, not threading – Mounting on the external side of the 19" extrusion – Any installation position selectable – For large cable volumes Supply schedule: 4 square jumpering bracket mounting material Finish: Zinc-passivated Supplied as: Set of 20 units 011500270001 Cable Cantilever – F or easy mounting in rack/on the shelf; quick conecting to and disconnecting from shelf or rack with a spring clip – Guarantees defined and kink-free cable management –M inimum space requirement behind the pushed-in shelves, 40 mm Supply schedule: Material/finish: Supplied as: Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length cable cantilever girder mounting material Sheet steel 1,5 mm, zinc-passivated Set o 10 units 7 Part-No. Image 011500280001 011500280002 011500280003 Description ECAT Long Description Hook-IN chassis runner useful depth 544,5 mm – For installation in 19" Rack and enclosure – Hang-ON for quick and easy mounting – Can also be screwed for heavier load rating – Can be screwed from inside( use in rack suites) – Height setting possible for various main section height Supply schedule: slot-in rails mounting material Material/finish: Sheet steel 2,0 mm, zinc passivated, blue chrome-plated Supplied as: Set of 10 pairs d 544,5 644,5 744,5 L 515,5 615,5 715,5 CoolBlast® Fan Unit for Roof Installation Thermostat-controlled For Rack type For InstaRack For InstaRack For InstaRack Order no. 011500280001 011500280002 011500280003 UP Set of 10 pairs Set of 10 pairs Set of 10 pairs – For forced rack cooling – Suitable for installation at any time in the InstaRack top – 115 VAC versions on request – Fan function (ON/OFF) thermostatcontrolled, setting from 0° to +60° C Material:Housing: Sheet steel, high-grade steel grid Finish: Zinc-passivated Approvals:CE Symbol in acc. with Low Voltage Directive, 73/23/EEC, EMC directive 89/366/EEC Supply schedule:1 CoolBlast fan unit®,1 mains cable, 3 m with safety plug (230 VAC), Mounting material, Operating instructions How supplied: Assembled, wired and tested Supplied as: Set of 4 units Note: Please also order specific mains cable Name CoolBlast® 230V 3-piece 8 Model Thermostatet Elec.connection 207….253 VAC; 50/60 Hz P(W) 45 V(m³/h) 495 ΔP(Pa) 74 p(dB(A)) Order no. 45,2 011500451001 UP Set of 4 Units Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length Part-No. Image Description ECAT Long Description CoolBlast Fan Unit for Roof Installation Speed-controlled – For forced rack cooling – Suitable for installation at any time in the InstaRack top – DC version on request (see CoolBlast® fan units) – Settable reference temperature (20° to 55°C) –S peed control, 30 to 100%, with sensor break 100 % rotation – Individual fan monitoring – F loating common alarm output for excess temperature alarm and fan failure –O ptical status display for O.K., excess temperature and fan failure – Acoustic warning incl. reset button ® Material:Housing: Sheet steel, high-grade steel grid Finish: Zinc-passivated front panel, powder-coated, smooth in RAL 7035 light gray Approvals:CE Symbol in acc. with Low Voltage Directive, 73/23/EEC, EMC directive 89/366/EEC Supply schedule:1 CoolBlast fan unit®, 1 sensor cable, 2 m (plug-in), 1 signal cable, 2 m (plug-in), 1 mains cable, 3 m with safety plug (230 VAC), Mounting material, Operating instructions How supplied: Assembled, wired and tested Supplied as: Set of 4 units Note: Please also order specific mains cable Name CoolBlast® 230V 3-piece CoolBlast® 230V 3-piece Model controlled SP controlled HP Elec.connection 100….253 VAC; 50/60 Hz 100….253 VAC; 50/60 Hz P(W) 25 32 Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length V(m³/h) 553 711 ΔP(Pa) 68 173 p(dB(A)) Order no. 49,6 011500461001 55,8 011500471001 UP Set of 4 Units Set of 4 Units 9 Part-No. 011500320004 011500320005 011500320006 Image Description ECAT Long Description InstaRack Bottom Cover closed – For covering the rack underside – For width 800 mm Supply schedule: Material/finish: Supplied as: W 600 600 600 800 800 800 011500401005 011500401006 d 544,5 644,5 744,5 544,5 644,5 744,5 Model For InstaRack For InstaRack For InstaRack For InstaRack For InstaRack For InstaRack InstaRack Plinth Stationary, Height 100 mm bottom cover Mounting material Sheet steel 1,0 mm, zinc-passivated Set of 4 units Order no. 011500320001 011500320002 011500320003 011500320004 011500320005 011500320006 UP Set of 4 Units Set of 4 Units Set of 4 Units Set of 4 Units Set of 4 Units Set of 4 Units – Stationary – Cable entry possible from all sides – Panels front and rear with vent slots Supply schedule: 4 plinth corners 2 plinth panels with slots 2 plinth panels closed on the side mounting material Material/finish: Sheet steel, Powder-coated texture, RAL 7035 Load rating: 4000 N static Supplied as: Set of 4 units 10 W 800 H 100 D 800 Model For InstaRack Order no. 011500401005 UP Set of 4 Units 800 100 1000 For InstaRack 011500401006 Set of 4 Units Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length Part-No. 011500299001 011500299002 Image Description ECAT Long Description Brush strip L 436 mm – Brush strip for top covers for flexible cable-entry Supply schedule: 2 brush strips Supplied as: Set of 20 units L 436 Model For InstaRack Order no. 011500299001 UP Set of 20 Units 636 For InstaRack 011500299002 Set of 20 Units Dimensions in mm: W = Width · H = Height · D = Depth · h = installation height · d = useful depth · L = Length 11 Ensuring The High Availability Of Mission-Critical Data And Applications. About Emerson Network Power Emerson Network Power, a business of Emerson (NYSE:EMR), delivers software, hardware and services that maximize availability, capacity and efficiency for data centers, healthcare and industrial facilities. A trusted industry leader in smart infrastructure technologies, Emerson Network Power provides innovative data center infrastructure management solutions that bridge the gap between IT and facility management and deliver efficiency and uncompromised availability regardless of capacity demands. Our solutions are supported globally by local Emerson Network Power service technicians. Learn more about Emerson Network Power products and services at www.EmersonNetworkPower.eu Locations Emerson Network Power Global Headquarters 1050 Dearborn Drive P.O. Box 29186 Columbus, OH 43229, USA T +1 614 8880246 Emerson Network Power Europe Middle East And Africa Mariakirchener Straße 38 94424 Arnstorf Germany T +49 8723 27 0 F +49 8723 27 154 knuerr@emerson.com Emerson Network Power United Kingdom George Curl Way Southampton SO18 2RY, UK T +44 (0)23 8061 0311 F +44(0)23 8061 0852 UK.Enquiries@Emerson.com While every precaution has been taken to ensure accuracy and completeness herein, Emerson assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications subject to change without notice. EmersonNetworkPower.eu Emerson. Consider it Solved, LIFE, Trellis, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. or one of its affiliated companies. ©2014 Emerson Electric Co. All rights reserved.