T-1 3/4 (5mm) SOLID STATE LAMP
ATTENTION
W7114PWC/H
WHITE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
LOW POWER CONSUMPTION.
The source color devices are made with InGaN on SiC Light
POPULAR T-1 3/4 DIAMETER PACKAGE.
Emitting Diode.
GENERAL PURPOSE LEADS.
Static electricity and surge damage the LEDS.
RELIABLE AND RUGGED.
It is recommended to use a wrist band or
LONG LIFE - SOLID STATE RELIABILITY.
anti-electrostatic glove when handling the LEDs.
AVAILABLE ON TAPE AND REEL.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
SPEC NO: DSAC7397
REV NO: V.1
DATE: MAY/29/2003
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.H.LI
PAGE: 1 OF 3
Selection Guide
Part No.
Dice
W7114PWC/H
Iv (mcd)
@ 20mA
Lens Type
WHITE (InGaN)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ
θ1/2
2800
4000
20°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
VF
Forward Voltage
White
IR
Reverse Current
White
Chromaticity Coordinates
White
X
Typ.
Max.
Units
Test Conditions
3.7
4.3
V
IF=20mA
10
uA
VR = 5V
pF
VF=0V;f=1MHz
0.33
Y
C
0.34
Capacitance
White
110
Absolute Maximum Ratings at TA=25°C
White
Units
Power dissipation
108
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Parameter
Reverse Voltage
Operating Temperature
-40°C To +85°C
Lead Solder Temperature[2]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
SPEC NO: DSAC7397
REV NO: V.1
DATE: MAY/29/2003
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.H.LI
PAGE: 2 OF 3
White
W7114PWC/H
SPEC NO: DSAC7397
REV NO: V.1
DATE: MAY/29/2003
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.H.LI
PAGE: 3 OF 3