d4266qsg_e_7.fm Page 1 Thursday, September 29, 2005 7:04 PM VH421101 BEFORE YOU BEGIN For more information, please refer to the Basic & Advanced Manuals or visit: www.olympusamerica.com/support Start Here Quick Start Guide SP-700 1AG6P1P2817-- GET STARTED Gather these items (box contents) Digital Camera Strap LI-40B Lithium Ion Battery AC Adapter (S-D-1AC) Power Cable USB Cable AV Cable OLYMPUS Master Software CD-ROM Items not shown: Advanced Manual (CD-ROM), Basic Manual, warranty card. Contents may vary depending on purchase location. b. Insert the battery 1 Slide d. Set the date and time c. Charge the battery (recommended*) 2 Lift 1 Set the mode switch to K and DC-IN Jack Mode Switch a. Attach the strap 2 Press Z to display the top menu, and select [MODE MENU] > [SETUP] > [X]. Connector cover Pull the connector cover forward and then turn it. 1 Strap 3 Press O/N to set an item. Press Z Button X/Y to select the next field. 1 Power Cable AC Adapter Date format 3 Insert Battery lock knob TAKE A PICTURE 2 3 ON 1 Press the shutter button mark over your subject. completely to take the picture. Green Lamp M D 00 : 00 NTSC SELECT SET GO OK Operation guide CAMERA DIAGRAM c. Take the picture 1 Using the monitor, place the AF target Y OFF VIDEO OUT u 2005 . 01 . 01 ’05.01.01 00:00 DUAL TIME SETUP *Battery comes partially charged. b. Focus a. Zoom AC Wall Outlet SETUP MEM CAM Power/Card Access Lamp Blinking red slowly: Charging Off: Charging complete (Charging time: Approx. 120 minutes) Pull the strap tight so that it does not come loose. Zoom Out: o Button press the o button to turn it on. Mode Switch Shutter Button Zoom Lever o Button DC-IN Jack Flash Zoom In: (Pressed Halfway) (Pressed Completely) Shutter Button Shutter Button 4 6M AF Target Mark 2 Press and hold the shutter button halfway 4 6M 4 6M Lens Speaker Multi-Connector to lock the focus. Connector Cover The green lamp indicates the focus is locked. Microphone Self-Timer Lamp Power/Card Access Lamp Monitor DISP./GUIDE Button REVIEW OR ERASE A PICTURE z/< Button (Custom/Print) QUICK VIEW Button c. To erase a picture Strap Eyelet a. Set the mode switch to q Mode Switch Zoom Lever Next Picture ERASE Turn the zoom lever towards T to enlarge the picture 10x (closeup playback) and turn it towards W to reduce the picture. Press Z to return to the original size. Press O/N or X/Y to scroll around. The last picture taken will be displayed. Prev. Picture Arrow Pad (O/N/X/Y) b. Take a closer look Z Button (OK/MENU) S Button (Erase) YES NO GO OK SELECT S Button 1 Display the picture you want to erase. 2 Press the S button. 3 Select [YES], and press Z. Set the mode switch to K or A to return to the shooting mode. Battery Compartment/ Card Cover The picture is permanently erased. Tripod Socket Arrow Pad TRANSFER IMAGES b. Connect the camera to the computer 1 Connect the camera to the computer using the USB cable provided with the camera. c. Transfer images to the computer 1 With the camera now connected, open OLYMPUS Master. The camera monitor will turn on automatically. a. Install the software Multi-Connector Connector cover Pull the connector cover forward and then turn it. 1 Insert the OLYMPUS Master CD-ROM. 2 Windows: Click the “OLYMPUS Master“ button. Macintosh: Double-click the “Installer“ icon. 2 Select the images you want to transfer, and click the [Transfer Images] button. 1 2 If the [Transfer Images] window is not displayed automatically: USB cable 2 Select [PC] on the monitor, and press Z. USB 3 Simply follow the on-screen P C instructions. a. Click the “Transfer Images” icon on the OLYMPUS Master main menu. b. Click the “From Camera” icon. EASY PRINT CUSTOM PRINT Your PC will now recognize your camera as a removable storage drive. Printed in Japan [Transfer Images] window The [Transfer Images] window is displayed. EXIT SELECT GO OK © 2005 [Transfer Images] button