SurroundLite
TM
PENDANT
INDIRECT
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
PROJECT INFORMATION
Project:
Type:
LE D
RD & D
OA
5
V ER
RI
B
Notes:
YEAR
AIRE
LUMIN
A
WARR NT Y
DIMENSIONS - SECTION VIEWS
PERFORMANCE/FT AT NOMINAL 3500K*
NOMINAL LUMEN OUTPUT
INPUT WATTS
EFFICACY
1250 lm/ft
56 W
89 lm/W
1000 lm/ft
45 W
90 lm/W
750 lm/ft
34 W
88 lm/W
*REFER TO PHOTOMETRIC DATA SECTION FOR EXACT VALUES
5 1/2"
4 5/32”
CONTROL
SENSORS
ORDERING CODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
SurroundLite
TM
16
17
PRODUCT SPECIFICATIONS
1 PRODUCT ID
2 VERSION
BBILED2 pendant led
B3 version 3
3 LIGHT ENGINE UP
4 NOM. LUMENS/FT
SL surroundlite 100%up/0%down
1250 1250 lm/ft
1000 1000 lm/ft
750 750 lm/ft
5 CRI
80 80 CRI
90 90 CRI
6 COLOR TEMP.
35 3500 K
30 3000 K
40 4000 K
7 SHIELDING
NO no shielding
Consult factory for other lumen packages
8 FIXTURE LENGTH
3
4
6
8
12
S#
3'
4'
6’
8’
12’
System Run
9 FINISH
10 VOLTAGE
AP aluminum paint
W white
C custom
120
277
347
UNV
120 V
277 V
347 V(1)
universal
1) Consult factory
14 BATTERY
B# battery pack 4’ sections
15 OTHER
F fuse
See Ceiling Mount Guide for more details
11 DRIVER
D
LT
BI
O
control ready(2) 0-10V
lutron
bi-level dimming
other-specify
12 CIRCUITS
1
2
+E#
+NL#
+GTD#
1 circuit
2 circuits
emergency section
night light section
generator transfer device
13 MOUNTING/SUSPENSION
CA#
CT9#
CT15#
CTS#
SA#
+SM
drywall+cable length (36” std.)
TB/TG 9/16+cable length (36” std.)
TB/TG15/16+cable length (36” std.)
ST+cable length (36” std.)
drywall+stem length >48” (18” std.)
seismic option
2) Integrated standard dimming
16 IC CONTROLS
17 CUSTOM
DS# daylight sensor
OS# occupancy sensor
DOS# daylight & occupancy sensor
See pages 5-6 for further details
C custom
Please specify
Driver, Battery Pack and Integrated Control Details and Custom Description:
FILE NAME:BBILED2-B3-SL.SPEC
February 13, 2015
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 1 / 7
SurroundLite
TM
PENDANT
INDIRECT
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
SURROUNDLITE TECHNOLOGY
BEAM 4 LED with SurroundLite provides the flexibility of high efficacy spherical three dimensional wide batwing distributions
and shielding options that all result in true lighting effectiveness. BEAM 4 LED is only 5.5” deep.
An innovative technology to get much more out of LEDs: Axis SurroundLite is based on the fundamental physics of how light
interacts with matter. The specially engineered lightguide is made of precisely coded and aligned molecules that shape LED
output in all three dimensions.
With SurroundLite extra-wide, multidimensional light distribution, light is directed in all three planes and sent in every corner of
the room. SurroundLite brings the promise of balanced brightness, facilitating lighting design.
SURROUNDLITE BENEFITS
No Streaks or Hot Spots of Light
Axis SurroundLite technology spreads out light uniformly
versus Lambertian distributions that put an intensity of light
directly above and below the luminaire.
Reduced 'Cave Effect', Increased Perceived Brightness
Wide 3D batwing uplight distribution lights up corners.
Lighting at seam between ceiling and wall.
3D light distribution from luminaire extremities lights up
adjacent spaces and vertical planes.
Use of Fewer Luminaires
The 3D nature of light distribution is well suited to
checkerboard patterns, reducing the need for continuous rows.
Better Facial Modeling / Facial Recognition
Reflected light from illuminated surfaces within the space
results in soft fill light on the vertical plane.
FILE NAME:BBILED2-B3-SL.SPEC
February 13, 2015
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 2 / 7
SurroundLite
TM
PENDANT
INDIRECT
LENGHTS
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
SUSPENSION / MOUNTING SPACING
5/8"
For all fixture lengths
Distance Between
Mounting Points:
Standard Suspension
Lenght (Adujstable):
BEAM
BEAM
BEAM
BEAM
BEAM
CABLE: 36"
STEM: 18"
3'
4'
6'
8'
12'
(36 3/8")
(48")
(72")
(96")
(144")
BEAM 3ft
4 5/32"
37 5/8"
BEAM 4ft
Row configuration and mounting spacing
file is available at: www.axislighting.com
under 'Downloads' tab.
4 5/32"
49 1/4"
WEIGHT
BEAM 6ft
BEAM 3 ft BEAM 4 ft BEAM 6 ft BEAM 8 ft BEAM 12 ft
4 5/32"
73 1/4"
BEAM 8ft continuous
13.5lbs / 6.1kg
18lbs / 8.2kg
27lbs / 12.3kg
36lbs / 16.3kg
54lbs / 24.5kg
4 5/32"
97 1/4"
BEAM 12 ft continuous
4 5/32"
145 1/4"
JOINERS
SYSTEMS (S#)
In order to allow very long runs of BEAM 4 LED luminaires, Axis
has developed an effective joining system.
Special care has been taken to maximize the performance of the
joiner for each BEAM option.
Runs of BEAM 4 LED that are greater than 12ft in length are
designated as systems (S#). This means that the run is comprised
of a combination 4ft and/or 8ft sections to be assembled on
site using our joining system. For more information on systems
and joining, please refer to the BEAM 4 LED installation sheets
available at: www.axislighting.com under 'Downloads' tab.
NOTE: Hang each system segment individually.
Do not assemble system prior to hanging.
FILE NAME:BBILED2-B3-SL.SPEC
February 13, 2015
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 3 / 7
SurroundLite
TM
PENDANT
INDIRECT
MOUNTING OPTIONS
CA DRYWALL CEILING
CT TILE CEILING - ON GRID
Mounting options are also
available for slope ceiling
and seismic bracing.
Installation sheets for all
mounting options are
available at:
www.axislighting.com
under 'Downloads' tab.
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
LED SYSTEM
LED
Use of OptimaLED technology based on
mid-flux LED
CRI
Minimum 80 or 90 color rendering index
CCT
Choice of 3000K, 3500K and 4000K color
temperature with a great color consistency
(within 3–step MacAdam ellipse).Both within
fixture and fixture to fixture.
LED life
Minimum 50,000h with 85% of lumen
maintenance in 250C ambient temperature,
in compliance with IES LM-80 testing
measurements.
Thermal
Management
Aluminium housing acting as the heat
spreader to maximize life.
Environment
Dry and damp rated in operating ambient
temperatures of 0-400C (32-104F)
LED UPGRADE / REPLACEMENT
SA STEM MOUNT IN DRYWALL CEILING
CONSTRUCTION
Housing
Extruded aluminum (0.075" nominal)
End Cap
Die cast zinc (0.60" nominal)
All LED light engines used are field replaceable and upgradable to
ensure the lighting system will last for years. Future-proof design
comes with easy access to LED light engines from above using
quick connectors (included in luminaire) and a screwdriver.
For more information on LED light engine upgrade and
replacement, please refer to the BEAM 4 LED Light Engine
Replacement sheet available at: www.axislighting.com
under ‘Downloads’ tab.
Interiors Brackets Die Formed Sheet Steel (18 ga)
Reflectors
Specular reflective aluminium and
White Powder Coated Sheet steel (24 ga)
Hanger
Die Formed Sheet Steel (16 gauge)
Suspension
Aircraft Cable or Ø 1/2" Stem
Cable Grips
Quick Connecting / Release
WARRANTY
Axis Lighting will warrant defective LEDs, boards, and
drivers for 5 years from date of purchase. Warranty is valid if
luminaire is installed and used according to specifications.
If defective, Axis will send replacement boards or drivers at
no cost along with detailed replacement instructions and
instructions on how to return defective components to Axis.
FINISH
LED Light Engine
ELECTRICAL
Controls ready
Dimming 0-10V driver
Lutron driver
BI-Level driver
L3D Hi-Lume series A. (EcoSystem or 3-wire control),
also available in: LDE5 EcoSystem 5-Series, LTE HiLume series A.
Bi-Level dimming
Other driver
Tunable output or specify
Aluminum paint, Powder Coated and custom finishes are also
available.
Emergency
Input Voltage
Emergency battery pack or emergency circuit
optional.
120V, 277V, 347V, UNV (120 - 277V)
APPROVALS
Power Factor
>0.9
Certified to UL and CUL standards
Class
Class 2 output
Wire Connectors Electrical connections are made with quick
connectors.
FILE NAME:BBILED2-B3-SL.SPEC
February 13, 2015
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 4 / 7
SurroundLite
TM
PENDANT
INDIRECT
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
INTEGRATED CONTROL OPTIONS
BEAM 4 LED luminaires allow the use of integrated controls such as daylight sensors (DS),
occupancy sensors (OS) and combination daylight/occupancy sensors (DOS). These options can
be seamlessly integrated into our luminaires. The control system could be used to optimize the
lighting of the space by reducing energy consumption through daylight harvesting and occupancy,
thereby improving the overall interior environment and allowing for LEED credits.
● Consult factory for other options.
CONTROL
SENSORS
The integrated control systems offered are:
DAYLIGHT HARVESTING (DS):
OCCUPANCY (OS):
With daylight sensors, maximum
lamp output is reduced according
to the available amount of natural
light. By reducing maximum lamp
output, energy consumption is
reduced by up to 20 percent in
a process known as “Daylight
Harvesting”.
When a room is vacated,
occupancy sensors ensure the
light will be turned off after a
programmed delay as well as
ensuring that light remains on
while the room is occupied.
Shown with Luxsense
EC-DIR-WH, FD-301
Luxsense, Micro Luxsense
DAYLIGHT HARVESTING AND OCCUPANCY (DOS):
Shown with FS-205
FS-205, FS-355,
FS-155 - Line Voltage
FS-505, FS-505C
A combination of Daylight & Occupancy sensor from Philips,
ACTILUME along with 0-10V or DALI ballasts can be used in
one form factor.
Actilume 1-10V
Actilume DALI
Shown with Actilume DALI
INSTALLATION EXAMPLE
Sensor location option
controls
option
FILE NAME:BBILED2-B3-SL.SPEC
February 13, 2015
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 5 / 7
SurroundLite
PENDANT
INDIRECT
TM
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
INTEGRATED CONTROL OPTIONS
SENSORS
BRAND
Daylight Sensor (DS)
Occupancy Sensor (OS)
Daylight & Occupancy
Sensors (DOS)
Model
TYPE
CODE
Lutron
EC-DIR-WH
Daylight
LD
Wattstopper
FD-301
Daylight
WD
Philips
Luxsense
Daylight
PL
Philips
Micro Luxsense
Daylight
MPL
Wattstopper
FS-205v2
PIR Occupancy & Ambient light level
WP1
Wattstopper
FS-355 (need lenses)
PIR Occupancy & Ambient light level
WP2
Wattstopper
FS-155
PIR Occupancy & Ambient light level
WP3
Wattstopper
FS-505
Ultrasonic Occupancy (Staircase)
WU1
Wattstopper
FS-505C
Ultrasonic Occupancy (Open Area)
WU2
Wattstopper
FM-105
High Frequency Occupancy (Wet)
WH
Philips
Actilume
Daylight & PIR Occupancy, LR11655
PA
Wattstopper
FS-305 (need Lenses)
PIR Occupancy
WP4
Wattstopper
FS-305 RC
PIR Occupancy & Ambient light level
WP5
Lutron TriPak
LRF2-DCRB-WH
Daylight & PIR Occupancy
LT
Enlighted
SU-3E-00
Daylight, Occupancy & Temperature
EL
HOW TO SPECIFY INTEGRATED CONTROLS
In the integrated Controls column, select the appropriate code:
a. For Daylight sensors, select “DS”
b. For Occupancy sensors, select “OS”
c. For Daylight & Occupancy sensor, select “DOS”
Write the code for the specific control after the sensor code.
Example:
DS-LD - for EC-DIR-WH Daylight sensor
OS-WP1 - for FS-205 Occupancy sensor
DOS-PA - for Actilume Daylight & Occupancy sensor
Consult table below and select specific controls options for
DS, OS or DOS controls.
product id
optics
lens length/ft
B6
up
lamp
down
lamp
MR16
finish
voltage
ballast
circuits
suspension/
mounting other
T8
B6
pendant
direct/ indirect
+D
direct
+I
indirect
S
F
PL
SB
A
lamp
If you are not sure which sensor to select, you have two choices;
a. Fill in just the general IC code. The factory will contact you
and suggest a control option.
b. Consult factory to make an informed decision.
SENSORS
0
1
2
+S
+A*
*end
zero lamps
one lamp
two lamps
staggered
asymmetric
lamp
BRANDzero
one lamp
0
1
2
+S
+A*
two lamps
staggered
asymmetric
Lutron
to end lamping only
*end
FILE NAME:BBILED2-B3-SL.SPEC
W
white
AP alu. paint
C
custom
E
ERS
D
instant start
rapid start
dimming
(specify details)
to end lamping only
one lamp only
Model
M16#
MR16 halogen
M16LED#
MR16
LED
(add 9" per lamp)
UNV
120
277
347*
*For
*Please
more details see page 2.
EC-DIR-WH
factory
CA#
cable (36" std)
CT# cable/t-bar (36" std)
SA#
stem (18" std)
*See Ceiling Mounting
Guide for further details.
1 one circuit
2 two circuits
+E em. circuit
+M
+MR16
consult
TYPE
D
B#
F
DS
OS
DOS
dust cover*
batt. pack
(specify details)
fuse
daylight
occ.
daylight & occ.
C
custom
(describe below)
CODE
Not for asymmetric
Daylight
LD
*
Wattstopper
FD-301
Daylight
WD
Philips
Luxsense
Daylight
PL
Philips
Micro Luxsense
Daylight
MPL
one lamp only
Daylight Sensor (DS)
custom
DS-LD
2
3
4
5
6
8
12
S# system
satin lens
T8
frosted lens
semi spec para. louver
white solid baffle
asymmetric reflector
controls
controls
February 13, 2015
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 6 / 7
SurroundLite
TM
PENDANT
INDIRECT
1.800.263.AXIS
[ T ] 514.948.6272
[ F ] 514.948.6271
www.axislighting.com
PHOTOMETRIC DATA
NO SHIELDING (NO)
BBILED2-B3-SL-1250-80-35-NO
1250lm/ft
165° 180° 165°
1503
125°
Vertical
Angle
145°
125°
1128
752
105°
105°
376
0°
90°
90°
90°
0
Lumens
Horizontal Angles
PHOTOMETRIC CURVE
145°
ZONAL LUMENS
CANDELA DISTRIBUTION
Lumen/ft up: 1251 lm/ft
Total Lumens: 5004 lm (for 4ft)
Input Watts: 56 W
Efficacy: 89 lm/W
90
95
105
115
125
135
145
155
165
175
180
0
22.5
45
67.5
90
Zone
0
103
474
780
920
906
807
697
617
577
577
0
117
512
847
993
967
848
721
625
582
577
0
145
622
1019
1183
1125
951
773
648
584
577
0
174
760
1235
1409
1308
1070
833
671
589
577
0
179
810
1324
1503
1383
1117
854
678
589
577
90
90-100
100-110
110-120
120-130
130-140
140-150
150-160
160-170
170-180
180
175
663
1017
1066
877
604
363
186
57
CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)
IES FILE: BBILED2-B3-SL-1250-80-35-NO-4-W-120-D-1.IES
NO SHIELDING (NO)
Vertical
Angle
PHOTOMETRIC CURVE
165° 180° 165°
1219
125°
145°
125°
914
609
105°
0°
90°
90°
105°
305
90°
0
Lumens
Horizontal Angles
BBILED2-B3-SL-1000-80-35-NO
1000lm/ft
145°
ZONAL LUMENS
CANDELA DISTRIBUTION
Lumen/ft up: 1014 lm/ft
Total Lumens: 4056 lm (for 4ft)
Input Watts: 45 W
Efficacy: 90 lm/W
90
95
105
115
125
135
145
155
165
175
180
0
22.5
45
67.5
90
Zone
0
83
384
633
746
734
654
565
500
467
467
0
95
415
686
805
784
688
585
507
472
467
0
117
504
826
959
912
771
627
525
473
467
0
141
616
1001
1142
1060
867
675
544
477
467
0
145
657
1073
1219
1121
905
692
549
477
467
90
90-100
100-110
110-120
120-130
130-140
140-150
150-160
160-170
170-180
180
142
538
825
864
711
490
294
151
46
CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)
IES FILE: BBILED2-B3-SL-1000-80-35-NO-4-W-120-D-1.IES
NO SHIELDING (NO)
Vertical
Angle
PHOTOMETRIC CURVE
165° 180° 165°
1503
125°
145°
1128
125°
752
105°
105°
376
90°
0°
90°
Lumens
Horizontal Angles
BBILED2-B3-SL-750-80-35-NO
750lm/ft
145°
ZONAL LUMENS
CANDELA DISTRIBUTION
0
90°
Lumen/ft up: 752 lm/ft
Total Lumens: 3008 lm (for 4ft)
Input Watts: 34 W
Efficacy: 88 lm/W
90
95
105
115
125
135
145
155
165
175
180
0
22.5
45
67.5
90
Zone
0
62
285
469
552
544
484
418
370
346
346
0
70
308
508
596
581
509
433
376
349
346
0
87
373
612
710
676
571
464
389
350
346
0
105
456
742
846
786
642
500
403
354
346
0
108
486
795
903
831
670
513
407
354
346
90
90-100
100-110
110-120
120-130
130-140
140-150
150-160
160-170
170-180
180
105
398
611
640
527
363
218
112
34
CRI:80 shown (for CRI:90 use 0.8 multiplier on watts and efficacy)
IES FILE: BBILED2-B3-SL-750-80-35-NO-4-W-120-D-1.IES
All IES files are available for download at: www.axislighting.com
FILE NAME:BBILED2-B3-SL.SPEC
February 13, 2015
Product design and development is an ongoing process at Axis Lighting. We reserve the right to change specifications. Contact Axis for the latest product information.
© 2011 Axis Lighting Inc. Page: 7 / 7