Fahrenheit Horizontal CFL [F6FH]

Fahrenheit
Recessed Horizontal Fluorescent Downlight
Fire and Sound-Rated New Construction
6” Aperture
P R O D U C T S P E C I F I C AT I O N S
Frame-in Kit
HOUSING: Fire and sound-rated housing. Up to 120 minute fire rated
L500 (floor-ceiling) & P500 (roof-ceiling) design. Die formed #24 gauge
galvanized steel construction. Snap on galvanized cover. Non-combustible
matt insulation.
JUNCTION BOX: Pre-wired #18 gauge galvanized steel junction box
with (7) 1/2” knockouts and (4) Romex® knockouts and removable plates.
Supplied with quick connectors for easy installation. Through branch
wiring maximum of (8) #12 AWG 90ºC branch circuit connectors (four-in,
four-out).
MOUNTING: Pre-installed adjustable bar hangers engineered to
accommodate lumber, laminated beams and T-bar.
LAMP SOCKET BASE: Thermoplastic four-pin compact fluorescent socket.
Pre-wired with #18 gauge, 600V junction box leads. Utilizes (1) or (2)
horizontally mounted compact fluorescent lamp. Max 32W (single), 13W
(double) lamp configuration.
• F
ire Rated: UL Listed fire resistance
rated for up to two hours
BALLAST: Compact fluorescent class “P” electronic ballast with
high power factor and end of lamp life protection circuitry. Ballast
accommodates 120V through 277V input and is accessible from below
ceiling. 0ºF minimum starting temperature and total harmonic distortion
(THD) less than 10%. Dimmable and emergency ballast available (consult
factory).
• S
ound Rated: Constructed to dampen
unwanted noise
CEILING: 1/2” up to 1”.
• IC rated, cULus Listed, UL Fire Listed,
UL Listed for Wet Location, ASTM E283
certified Air Tight
CUTOUT: 6 3/8”.
LISTINGS: IC rated. cULus Classified. UL Fire Listed. UL Listed for Wet
Location. ASTM E283 certified Air Tight.
Trim
CONSTRUCTION: Spun aluminum.
Product Code:
Type:
Project:
Contact:
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
Date:
www.dmflighting.com
Page 1 of 4 | V-12.01.15
Fahrenheit
Recessed Horizontal Fluorescent Downlight
Fire and Sound-Rated New Construction
6” Aperture
PRODUCT SELECTION GUIDE
Product Code Example: F6FV113
FRAME-IN KIT
APERTURE
HOURLY RATING
LAMP
OPTION
F6FH 6” Aperture
[Blank] 1 Hour Fire Rating
-113 1 x 13W
-EM
Emergency Ballast
2
-118 1 x 18W
-DIM
Dimming Ballast
2 Hour Fire Rating
-126 1 x 26W
-132 1 x 32W
-213 2 x 13W
TRIM
PRODUCT CODE
D6061SFCWR
Clear / White Flange
D6061SFSWWR White / White Flange
D6161SFCWR
Clear / Frosted Lens / White Flange
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
www.dmflighting.com
Page 2 of 4 | V-12.01.15
Fahrenheit
Recessed Horizontal Fluorescent Downlight
Fire and Sound-Rated New Construction
6” Aperture
FR AME-IN KIT DIMENSIONS
F6FH
6” Fire Rated Housing
8 11 8 "
8 8"
206mm
206mm
6 33 8 "
6 8"
111mm
111mm
UP TO 24"
UP TO 24"
[UP TO 610mm]
[UP TO 610mm]
12 11 2 "
12 2 "
318mm
318mm
TRIM DIMENSIONS
dmf Lighting
®
D6061
Smooth Trim
D6161
Frosted Lens Trim
7 5 16"
186mm
7 7 16"
189mm
1118 E. 223rd St. Carson, CA 90745
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
www.dmflighting.com
Page 3 of 4 | V-12.01.15
Fahrenheit
Recessed Horizontal Fluorescent Downlight
Fire and Sound-Rated New Construction
6” Aperture
PHOTOME TRICS
Fixture: F6FH-213-D6061SFCWR
Lamp: Two (2) 13W (CFQ13W/GX24q/35)
Candela Distribution
Illuminance Chart
Zonal Lumen Summary
Distance
Foot Candles
Diameter
Zone
Lumens
Luminaire
%
2’
95
3.5’
0-30
322
45
4’
24
7.0’
0-40
507
71
6’
11
10.4’
0-60
708
99
8’
6
13.9’
0-90
710
100
10’
4
17.4’
0-180
710
100
12’
3
20.9’
157
3200
235
313
4800
392
Beam Angle: 82°
64000
470
dmf Lighting
®
1118 E. 223rd St. Carson, CA 90745
T: 1.800.441.4422
© 2015 DMF Lighting. All Rights Reserved. Specifications subject to change without notice.
www.dmflighting.com
Page 4 of 4 | V-12.01.15