SPECIFICATIONS
CLARA
CLA | Suspended, Wall
alwusa.com/clara
CLARA – CLA
Suspended, Wall
SPECIFICATIONS
1. BASE MODEL
2. SIZE/
RUN LENGTH
CLA
CLAW1
4-3/4” suspended, 52% direct / 48% indirect
4-3/4” wall sconce, 52% direct / 48% indirect
1
4. REMOTE
DRIVER –
Can be mounted vertically or horizontally;
remote driver box included
___
___
Individual (CLA: 2’, 4' or 8' section) (CLAW: 2' or 4' only, no joining)2
Continuous suspended row (enter total linear length in 2' increments, ex: 20’)2,3
One remote driver enclosure and one power feed per individual section
3
Continous rows (suspended CLA only) are comprised of mechanically joined,
individual sections that are powered separately. Lenses are not continuous; joiners are used to connect sections. Contact factory with section length details for pricing.
High-performance LED – 522 delivered lm/ft, 5.9 W/ft, 89 lm/W4 LED/3000K
3000K CCT
LED/3500K
3500K CCT
LED/4000K
4000K CCT
4
0/10V/5 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/1%)
1% Dimming to 1%
Performance calculations are derived from the actual
IES test results at 4000K using an SFR lens and 0/10V/1% driver
0% Premium dimming to 0%
DALI 5 DALI dimming to 0%
DMX5 DMX dimming to 0%
HILUME/A3 5 Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
5
5. LENSED BODY
Type:
2
3. LAMPING –
Page 2 of 5
CLR6,7
SFR7
All drivers are remote
Clear, extruded acrylic lensed body
Semi-frosted (2%), extruded acrylic lensed body
6
Subtle striations may be visual, see Page 4 for more info
See Page 5 for lensed body descriptions and distinctions
7
6. FINISH
AL
Standard, natural “Ultimatte” aluminum
AL
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
CLARA – CLA
Suspended, Wall
SPECIFICATIONS
7. VOLTAGE
8. ADDITIONAL
OPTIONS
Page 3 of 5
120
277
UNV
347
120 volt
277 volt
Universal voltage
347 volt (driver options may be limited; consult factory)
NONE
COMBO
EMC/___8
EMB/___8
SB
None
Combination 4.5" canopies at feed locations with both
power feed and suspension mounting hardware
Emergency circuit (indicate total quantity, ex: EMC/4)
Remote emergency battery pack (indicate total quantity, ex: EMBP/4)
Seismic bracing
8
Type:
Consult factory for available options
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
CLARA – CLA
Suspended, Wall
SPECIFICATIONS
DIMENSIONS
3.35''
Page 4 of 5
Driver Box
Driver
6.61"
Wall Plate
4.72''
Base
CROSS-SECTION
Luminaire Body
SCONCE/SURFACE-MOUNT
3.83"
ADA COMPLIANT
MOUNTING OPTIONS
MOUNT VERTICALLY
FOR SCONCE
SUSPENDED
(CLA)
MOUNT HORIZONTALLY
FOR CEILING OR WALL
SURFACE-MOUNT DIRECT
(CLAW)
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
CLARA – CLA
Suspended, Wall
SPECIFICATIONS
Page 5 of 5
LED HOUSING
LENSED BODY OPTIONS
100% recyclable, extruded architectural grade
T6061 aluminum with .08" minimum wall thickness.
Extruded, impact-resistant acrylic.
The CLR lensed body is a clear acrylic. NOTE: In the
CLA suspended model, this clear option produces
a faint striation patten on direct- and lateral-facing
surfaces within 12' from the luminaire. There is no
striation pattern on wall surfaces with the CLAW
wall sconce.
ELECTRICAL
Remote drivers are Class 2. LED light engine
is LM-80 compliant with 80+ CRI. ETL listed
for damp location.
EMERGENCY
The SFR lensed body is a semi-frosted (2%) acrylic.
This option produces smooth, even illumination (no
striation pattern) on all surfaces at all distances in
both models making it an ideal choice for general
area lighting applications.
Luminaires can be wired for emergency circuit
and/or emergency battery backup. Consult factory
for details.
SUSPENSION
HARDWARE
CEILING HARDWARE
COMBO CANOPY
(1) 4.5" canopy per
power feed location,
(1) bullet mount, (1) 8'
aircraft cable and (1)
2" canopy (for use with
T-bar mounting) per
suspension point
Choose option
COMBO to specify
4.5" canopies at feed
locations with power
feed and aircraft cable
suspension mounting
CLEAR LENS BODY –
CLR
JOINER
For suspended models, a
WHITE joiner is provided
to connect the luminaire
sections together to form
a continuous row. NOTE:
Each section is powered
by a separate power feed.
SURFACE MOUNT
HARDWARE
SEISMIC BRACING
FROSTED LENS BODY –
SFR
Eye Bolt
(By Others)
Gripper
w/Hook
JOINER
2-Cable
Clamp
FINISH
Standard finish for LED
housing is "Ultimatte"
aluminum — a smooth,
clean and durable finish
achieved from a deepetch and two-step clear
anodizing process.
Aircraft
Cable
WALL PLATE
Optional, add-on
hardware (SB) includes
cable gripper with
hook, 2-cable clamp
and specified length
of aircraft cable per
suspension point
CLAW wall models
come with a thin,
1/2" wall bracket
and plate making
the sconce ADAcompliant.
ALUMINUM – AL
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n