Please note that the above information are subject to

advertisement
Toilet/Squat Sensor
ODEON ®
K-744T
Product Specification:
Model
K-744T-M
More
Info.
K-744T-C05*
Power
AC version of K-744T,
2 “AAA” size alkaline batteries
Requires power supply
(K-16306T-NA)
Liter per flushing
Water pressure at 0.10~0.55 MPa: 4L, 6L (adjustable)
Temperature
Environmental temperature: 1~55℃
Water temperature: 1~45℃
Starting pressure
0.05 ~ 0.86MPa
Sensing distance
Within 85cm from sensing window (along the direction of
transmitting angle)
Flushing delay
3~8 seconds after user leaves
Connect dimension
Inlet pipe G 1”, Outlet pipe G 1-1/2”
Protective flushing
Auto flush once every 24h if unused
Recommended
working pressure
Sensor inlet dynamic pressure: 0.1~0.55MPa, recommended inner
diameter of water supply (including water meter, valve, etc.) no
less than 25mm
Fit For
Toilet/Squat
Note
K-4350, K-4368, K-4349/67(imported products) K-4330,
12.3/12.4
K-8750, K-19045T, K-18133T, K-18132T, 17647T/K-4001T/4002T
12.5/12.6

Available in satin chrome(-SC) and polished chrome(-CP) only.

K-2430T-NA urinal sensor pipe is required for a top spud inlet toilet.

K-2429T-NA urinal sensor pipe is required for a rear spud inlet toilet.

K-2429T-SA-NA urinal sensor pipe is required for a squat.
* Please refer to the installation instructions for the connection of AC sensor and AC power supply.
Product Dimension:
Please note that the above information are subject to change without notice.
20140212
www.kohlerasiapacific.com
Note:
a.
To ensure sensing effect, the installation dimensions of L and H should be strictly observed. Do
not use if L or H falls out of the ranges shown in the tables above.
b.
When toilet installation length is between 540mm and 850mm, please use K-2430T-NA as top
spud inlet while K-2429T-NA as rear spud inlet.
c.
When squat installation length is between 700mm and 850mm, please use K-2429T-SA-NA as
rear spud inlet. To comply with the tables above, you may cut either end of the connecting pipe.
Do not use if the squat installation length is more than 850mm.
d.
When toilet length is less than 700mm, please use angle-converting piece (included in the
product package; please refer to the installation instructions) especially for a wall-hung toilet.
Please note that the above information are subject to change without notice.
20140212
www.kohlerasiapacific.com
Download