Rego Section 2 2006 - Gas Equipment Company, Inc.

advertisement
Gauges
IMPORTANT INFORMATION: Product must be installed
and used in strict conformance with NFPA Pamphlet 58 and/or
NFPA Pamphlet 54 and all other codes, regulations and manufacturer recommendations.
Failure to follow these codes, regulations and recommendations
could result in hazardous installation, bodily injury and/or death.
PRODUCT TRAINING SCHOOLS AVAILABLE. Contact a GEC
customer service representative for more information.
WARNING: LP Gas is extremely flammable and explosive.
Devices used for handling LP Gas and Anhydrous Ammonia must
be installed and used in strict conformance with NFPA Pamphlet
58 and 54 and all other codes, regulations and manufacturer
recommendations.
Gauges
267
How To Order A Gauge
Tank configuration shown is appropriate for tanks built since the mid-1970’s. If yours does not match, please call the Gas
Equipment Company location nearest you and we will be glad to help.
1. Determine Tank Type
❏ Above Ground
❏ Under Ground
2. Determine Gauge Head Type
4 bolt
❏AJR=-2-1/32
- 4 bolt
❏ SR
A = 2-1/2
❏ 1-1/4” Thread
❏ 1” Thread
3. Determine Tank Diameter
D = _______ “
From Tank Data Plate or
Measure Circumference (in inches) and divide by 3.14
4. Determine Riser Height: H = ________ “
Note: Riser height is the distance, in inches, from tank surface to
top of mounting flange or coupling for gauge.
Distance
"H" Dimension
"H"
"H" Dimension
"H"
Height
Footring
5. Determine Mounting Position
Top Mount
Angle
Mount
Center
Line
Gauges
End
Mount
❏ Top Mount
❏ Angle Mount
❏ Side Mount
❏ End Mount
Side Mount
Note: Pivot point of float must be at center line of tank.
268
Adjustable Liquid Level Gauge
Here is an adjustable, magnetic, liquid-level gauge which makes it a snap
to quickly and economically replace non-functional LP Gas gauges in the
field. Because one size adjustable gauges fit many tanks, the ‘One’
Gauge greatly reduces the number of spare gauges you need to stock.
The ‘One’ Gauge is UL listed for LP gas service.
Junior™, 4-Bolt, Brass Head Adjustable Gauges
Part #
Adj. Stem Length
Application
B0049S02159
B0049S02170
12-1/2” to 19-3/4”
19-1/2” to 33-1/4”
Above Ground
Senior™, 4-Bolt, Aluminum Head Adjustable Gauges
Part #
Adj. Stem Length
Application
0049S02207
0049S02208
12-1/2” to 19-3/4”
19-1/2” to 33-1/4”
Above Ground
Junior™ Brass Threaded
Adjustable Gauge
1 1⁄4" NPT Threaded
Part #
Adj. Stem Length
Application
B0049S02203
B0049S02204
12-1/2” to 19-3/4”
19-1/2” to 34-3/4”
Above Ground
Part #
Adj. Stem Length
Application
B0049S02160
B0049S02167
12-1/2” to 19-3/4”
19-1/2” to 34-3/4”
Above Ground
1" NPT Threaded
Common Junior™ & Senior™
Float Assemblies - Top Mount
Part #
Tank Diameter
6857S11009
6857S13759
6810S14379
6857S17009
6857S18509
24”
30”
32”
37.5”
41”
Assembly Instructions
B6287-4
STEP 1: **NOTE: THESE ASSEMBLY INSTRUCTIONS ARE GOOD FOR MODEL #'S 6285-, 6287, 7287-, & 8987OLD GAUGE LENGTH
STEP 4:
INSERT BRASS BEARING,
0109-00495, THROUGH
OTHER SIDE OF GEAR HOUSING
FLOAT ARM TO BE INSERTED FROM
FRONT SIDE SO THAT SINGLE BLACK
MARK ON FLOAT ARM GEAR FITS
BETWEEN TWO WHITE MARKS ON
PINION GEAR.
STEP 5:
SELECT FLOAT ARM
TO FIT TANK
NEW GAUGE TO OLD GAUGE LENGTH
GEAR HOUSING
LOCKNUT
B6287-4
CENTERSHAFT
"R" LOGO
MARK NEW GAUGE
AS SHOWN
TO BE LOOSENED
MARK OR SCRIBE
CENTERSHAFT AS SHOWN
STEP 2:
STEP 6:
ORIGINAL MARK
FROM STEP 1
TEMPORARILY ADJUST SUPPORT
SHORTER THAN THE
MARK ON CENTERSHAFT
CUT OFF EXCESS CENTERSHAFT
JUST BELOW MARK AS SHOWN
INSERT SCREW, 0040-00479,
WITH #1 PHILLIPS SCREWDRIVER
PROPERLY TIGHTENED
INCREASE SUPPORT LENGTH
BACK TO OLD GAUGE LENGTH
STEP 3:
AT
80
5
/5
HES
ROC
DO NOT USE FOR
FILL
FILL
5
GAU
27
TER
ING
ING
OF
OF
20
TEX AS
TEX
AS
UL
10
U.S.A.
DAL LAS
DAL
TX. U.S.A.
LAS TX.
NO.
NO.
DIAL
DIAL
B6287-4
H
RI
Z.
.
95
00
30
GES
GES
INC.
INC.
33
C
Y
..
90
70
60
50
40
5-
O
ORIGINAL MARK
LINES UP WITH
EDGE OF LOCKNUT
DIAL SHOULD READ APPROXIMATELY
45-50% WITH FLOAT ARM AT 90º
TO SUPPORT. MOVE FLOAT ARM
UP AND DOWN TO CHECK FOR FREE
MOVEMENT
TA
AN
D T
NK
ND
KS
UN
S
ROOU
MAX. LEVE
MAX.
GR
LEVELL
%TTO
%
EG
E
OTT
LIQUID
AT LIQUID
AT
OVV
AA
BBO
LL V
TEM
TEM
PP.. ˚F
˚F
AA
V
20 60
LL
60 80
00 20
80
100
BBUU
100
BBUU
120
120
OO
PPRR RROO
00 PP
E
M
SHAFT IS NOW
RECESSED
CAREFULLY
RETIGHTEN
Gauges
STEP 7:
LU
O
B6287-4
CHECK FOR FREE MOVING
PINION AND CLEAR HOLE
269
ASME Tank & DOT Cylinder Gauges
Rochester Gauge Information
Rochester gauges are the standard of excellence for measuring LPG levels. Stainless steel bearing surfaces and self-aligning bevel gears ensure extremely long life.
The one-piece, die-cast plastic gear housing is designed to
protect gear operation. The nitrile float is another exclusive development of Rochester engineers. This lighter float lets
Rochester use a lighter counter weight which lengthens gauge
Junior™, 4-Bolt Gauges
Furnished with gasket, dial, and 4 mounting bolts.
Part #* Bolt Circle**
6281
6284
2-1/32
Description
Mounting Bolt
Top mounting
Side, end or angle mount
(4) 1/4” - 28
*Use “B” prefix for Brass head gauge, ie: B6281 Brass Head Gauge
**Measured diagonally
Senior™, 4-Bolt, Aluminum Head Gauges
Furnished with gasket, dial, and mounting bolts.
Part # Bolt Circle*
Description
6280
6283
6290
2-1/2
6293
Top mounting
Side, end or angle mount
Top mounting with 4” dial
Side, end or angle mount
with 4” dial
*Measured diagonally
Junior™, Threaded Gauges
1-1/4" NPT Threaded, Brass Head
Part #
Description
B7281
B7284
Top mounting
Side, end or angle mount
1" NPT Threaded, Brass Head
Part #
Description
B8981
Top mounting
Hex
2”
Hex
2”
3/4" NPT Threaded, Aluminum Head
Description
Hex
7381
7384
Top mounting
End mount
2”
Gauges
Part #
270
Mounting Bolt
(4) 5/16” - 24
life particularly where vibration is a factor. Dial chambers are
hermetically-sealed, moisture-proof and easily replaced without exposing the contents of the tank.
The one-piece gauge head is die cast from a high-tensile
strength aluminum alloy. All Rochester 6200 Series gauges
are UL listed for LP gas service.
NH3 Gauges &Heading
Lift Truck
goes
Gauges
here
The A6200 series gauges are designed to withstand the corrosive rigors of NH3 service. The A6400 series is all-stainless-steel
construction designed to withstand NH3 with chemical additives.
All “A” prefix gauges are UL listed for NH3 service. These gauges
come standard with direct-reading percentage dials.
Junior™, 4-Bolt Gauges
Furnished with gasket, dial, and 4 mounting bolts.
Part #
Description
A6281
A6284
Top mounting
Side, end or angle mount
Senior™, 4-Bolt Gauges
Furnished with gasket, dial, and 4 mounting bolts.
Part #
Description
A6280
A6283
Top mounting
Side, end or angle mount
Senior™ N-Serve Gauges
All stainless steel construction.
Furnished with gasket, dial, and 4 mounting bolts.
Part #
Description
For Tank Diameter
A6480-00012
A6480-00013
For top mount,
N-Serve Gauge
46”
41”
A6200 Series Gauge
Replacement NH3 Dials
Part #
Description
5323S01848
5002S00002
Junior
Senior
Perfect for most forklift cylinder replacement.
Junior™, 4-Bolt, Aluminum Head Gauges
Model #
Cylinder Size
14 lb
9” I.D.
20 lb
12” I.D.
33.5 lb
12” I.D.
43.5 lb
12” I.D.
60 lb
14” I.D.
100 lb
14-1/2” I.D.
Mounting
Dial #
Universal
Horizontal
Vertical
Universal
Horizontal
Universal
Horizontal
Universal
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Vertical
Vertical
5343S01823
5323S01789
5323S01819
5343S01816
5323S01789
5343S01791
5323S01789
5343S01824
5323S01789
5323S01821
5323S01789
5323S01812
5323S01789
5323S01813
5323S01814
5323S01816
Gauges
6284-32
6284-39
6281-5
6284-33
6284-24
6284-34
6284-24
6284-35
6284-24
6281-49
6284-45
6281-50
6284-45
6281-38
6281-39
6281-47
271
271
Lift Truck Gauges
Junior™, Polymer Construction Gauge
3/4" NPT Threaded
This gauge measures the liquid contents of a horizontally mounted lift truck cylinder. The gauge has a second scale for use when
the tank is stored vertically which reads “OK” or “ADD”.
The gauge head accepts a snap-on Junior™ dial and has 1 3⁄8"
[35] hex wrenching flats. The gauge support, center shaft and
float arm are constructed of a propane compatible thermoplastic
polymer material. This construction reduces the number of parts
and improves reliability and accuracy.
Part #
Cylinder Size
Mounting
Dial
7384-4021
20, 33.5, 43.5 lb
Universal
5714S02591
Junior™, Threaded Gauges
1-1/4" NPT Threaded, Brass Head
Rochester‘s gauges are ideal for rugged, trouble-free, lift truck
service. Features include the hermetically-sealed, magneticallycoupled, easily-replaceable dial.
Model #
B7284-33
B7284-24
B7281-45
B7284-34
B7284-24
B7281-48
B7284-35
B7284-24
B7281-49
Cylinder Size
20 lb
12” I.D.
33.5 lb
12” I.D.
43.5 lb
12” I.D.
Mounting
Dial #
Universal
Horizontal
Vertical
Universal
Horizontal
Vertical
Universal
Horizontal
Vertical
5343S01815
5323S01789
5323S01818
5343S01791
5323S01789
5323S01820
5343S01824
5323S01789
5323S01821
3/4" NPT Threaded, Aluminum Head
Stainless steel gears & bearings guarantee longer service. There
is a gauge for all size containers and any mounting position.
Model #
Cylinder Size
Mounting
Dial #
7381-1003
14 lb
9” I.D.
Universal
5323S01916
Universal
Horizontal
Vertical
Universal
Horizontal
Universal
Horizontal
5343S01912
5323S01944
5323S01914
5343S01992
5343S01944
5343S01993
5343S01944
Horizontal
5323S01944
Gauges
7384-1005
7384-1028
7384-1035
7384-1006
7384-1028
7384-1007
7384-1008
7384-1029
272
20 lb
12” I.D.
33.5 lb
12” I.D.
43.5 lb
12” I.D.
60 lb or 100 lb
14” I.D.
Motor Fuel Gauges & Farm Tank Gauges
Motor Fuel Gauges
Zinc head gauge with heavy-duty magnet. Ideal with remote reading replaceable Twinsite® Sender.
Tank
Dia. (“)
8
10
12
13
14
16
18
20
22
24
30
Tank
Mfg.
Rochester
Part #
Gauge Head Mounting Dial
Stamp
Angle
Type
Manchester 6244-00600 B**
Brunner
6244-605
6244-00032
Brunner
6244-00046
Manchester
6244-00353
6244-00047
Brunner
6244-00094
Manchester
6244-00054
Manchester
6244-00384
6244-00048
Brunner
6244-00097
Brunner
6244-00054
6244-00334
Manchester
6244-00599
6244-00049
Brunner
6244-00100
6244-00055
Brunner
6244-00105
Manchester
6244-00338
6244-00050
Brunner
6244-00106
Manchester 6244-00604 B**
Brunner
6244-00056
Manchester
6244-00040
6244-00051
Brunner
6244-00109
Manchester
6244-00357
Brunner
6244-00058
Manchester
6244-00342
Brunner
6244-00052
Manchester
6244-00358
6244-00344
Brunner
6244-00343
Brunner
6244-00074
Manchester
6244-00181
Brunner
6244-00073
Manchester
6244-00371
Brunner
6244-00085
*DR = Direct Read Dial
**B = Brass Head
H8LN
H8AB
H10AB
320
Lower 45
315
H10C
CENTER
H12C
CENTER
H13LN
320
H13C
CENTER
H14A
45
H14LN
320
H14C
CENTER
H16A
45
H16C
CENTER
H16A
30
H18A
45
H18C
CENTER
H20A
45
H20C
CENTER
H22A
H22C
45
CENTER
H24A
45
H24C
CENTER
H30C
CENTER
DR
DR
DR
TS
DR
DR
TS
DR
TS
DR
TS
DR
TS
DR
DR
TS
DR
DR
DR
DR
DR
TS = Twinsite® Sender
Farm Tank Gauges
These lever-action gauges are designed for use in stationary farm tanks or other
tanks with flat heads. They are to be mounted on the centerline in the middle of
the head. The maximum recommended float length is 48".
Part #
Description
Application
F7183
Lever Action
Gauge 1-1/2” NPT
5001S00605
5002S00605
Fractional dials
Stationary farm tanks or tanks with flat heads.
Suitable for Gasoline & Diesel tanks.
Stationary tanks
Vibration dampened for mobile tanks
For correct float-rod sizing and installation, refer to the figure below.
⁄2 Tank height minus 2"
1
Gauges
File notch near end of float rod
⁄4”
1
273
Bulk Storage Gauges
Magnetel™ Gauge Models
Rochester Magnetel™ Liquid Level Gauges are available in 4" and 8"
dial sizes. Standard calibration is percent of total tank volume.
Model #
Mounting
6336-11
6339-11
6342-11
6360-11
Top
Dial Size
4”
Side, end or angle
8”
Top
Materials Code/Trim # Chart
Trim #
-11
Type
Service
Bearing Float & Stem
Float
Support Support Drive
Counterbalance
Block
Block Magnet
Gauge
Flange
LPG or
Type 316
NH3
stainless steel
Cold-roll steel zinc plated
Type 303
stainless steel
Alnico VI
All
Other
Parts
300 series
stainless
steel
Trim 11 should be used on containers of 3500 WG or more. Gauges for ver tical tanks require drawings for computing proper gauge dimensions & mounting locations.
More trim levels available for other products.
Specify prefix for appropriate dial & mounting
Dial Prefix
When ordering specify:
“C” = Combination LPG/NH3.
• Liquid product and specific gravity.
• Type vessel, inside diameter (in inches) & head type (ellipsoidal,
semi elliptical, hemispherical).
• Prefix (see chart).
• Model # for mounting location (top, side, 8" or 4" dial).
• Trim # according to product compatibility requirements.*
• Bolt hole location of mounting flange
• If other than standard percent of total volume dial is required.
• Top-mounted gauges require dimension from mounting flange
face to tank shell plus shell thickness.
• Angle-mounted gauges require tank drawings for computing
proper gauge dimensions.
Mounting Prefix
“X” = When straddle mounting is required.
“Y” = When ordering gauge for 2" opening.
“M” = Special mobile.
“V” = Vertical tank.
Part Number Example
Prefix Model # Trim # Diameter
CX
6342
11
108”
Combination
LPG/NH3
Straddle
mounted
Common Magnetel Configurations
Part #
Diameter Of Tank
C6342-11-84
C6342-11-108
C6342-11-130
84”
108”
130”
See trim chart
Side, end or angle
mounted 8" dial
Special calibration dials are available at extra cost.
Please state requirements. Special gauges made to order.
ROBOGAUGE
For mobile or stationary applications with manhole. Make the change from
your 1" NPT rotary type gauges to a direct-reading float gauge without tank
alterations.
LPG and NH3 tanks can change over to a direct reading float gauge by
using Rochester Gauges new ROBOGAUGE.
Gauges
This new direct reading float gauge can be mounted in containers that have
a 1" NPT opening and a man way. This is accomplished through the unique
design that allows the gauge to be disassembled into two segments, inserting the head assembly from the outside of the container, then reattaching
the support and float assembly inside the container.
Part #
Diameter Of Tank
RRCM6339-11-72
RRCM6339-11-84
RRCM6339-11-86
72”
84”
86”
4” Dial not included. Must be ordered separately.
274
Robogauge Disassembled
Robogauge Cutaway
Transport Gauges
Ideal for LPG or NH3 bobtails and transports. Also available for CO2 use.
Magnetel ™ Rough Rider™ Gauges
Common Rough Rider™ Configurations
The Rough Rider™ is designed to withstand the vibration and
shock inherent in mobile service. Their service life in over-theroad and off-road transports carrying liquids including LP Gas,
NH3, and cryogenic liquids is unsurpassed. These gauges provide accurate indications of liquid level at a glance, making inconvenient rotary gauges obsolete.
Rough Rider™ gauges are equipped with an exclusive spring
steel shock absorber on the float arm which substantially reduces the stress that can quickly destroy conventional gauges.
Part #
Dial
CM6339-11-72
CM6339-11-79
CM6339-11-84
CM6339-11-96
Diameter
of Tank
72”
4”
79”
84”
96”
Also available with 8" dials upon request.
Other size supports available by special order.
Specify prefix for appropriate dial & mounting
Dial Prefix
“C” = Combination LPG/NH3.
“D” = Insulated extension for CO2 and other cryogenic liquids.
Mounting Prefix
“M” = Special mobile mounting.
When ordering specify:
• Liquid product and specific gravity.
• Type vessel, inside diameter (in inches) & head type
(ellipsoidal, semi elliptical, hemispherical).
• Prefix (see chart).
• Model # for mounting location (top, side, 8" or 4" dial).
• Trim # according to product compatibility requirements.*
• Bolt hole location of mounting flange
• If other than standard percent of total volume dial is required.
• Top-mounted gauges require dimension from mounting
flangeface to tank shell plus shell thickness.
• Angle-mounted gauges require tank drawings for computing
proper gauge dimensions.
Eliminator™ Rotogauge Replacement
1" NPT
A direct-reading float gauge that is a direct replacement for
rotary-type, dip-tube gauges in LP and NH3 storage tanks. Only
intended for use in tanks with fixed, liquid-level gauges.
Part #
Description
P6293-R4400
For mobile or stationary tanks up to 44” in diameter
P6293-R6000
For mobile or stationary tanks greater than
44” in diameter & up to 60” in diameter
P6293-R7200
For stationary tanks greater than 60” & up to 72” in diameter
P6293-R8400
For stationary tanks greater than 72” & up to 84” in diameter
Gauges
275
Gauge Dials — Junior & Senior
Hermetically-sealed, moisture-proof, replaceable dial chambers are easily and safely removable under tank pressure. UV stabilized Jr.
plastic case will not corrode.
R3D Dials - Remote Ready
Part #
Description
5909S02733
Rochester Junior™ Dial / ASME Above ground
5909S02799
Rochester Junior™ Dial / ASME Under ground
5986S02733
Rochester Senior™ Dial / ASME Above ground
5987S02787
JY Taylor Style A Dial
5988S02788
JY Taylor Style B Dial
5909S02733
5986S02733
5987S02787
Junior™ Direct Read Dials for ASME Tanks
Part #
Description
5909S02799
Junior™ Dial for LPG ASME Underground Tanks 5-95%
5323S01848
Junior™ Dial for NH3 ASME Tanks 5-95%
Junior™ Direct Read Dials for Mobile 4-Bolt Gauges
Part #
Description
5323S01789
Junior™ Mobile Dial - Fractional
5909S02772
Junior™ Dial 10-82% for Vertical Cylinders
5323S01852
Junior™ Dial 5-88% for Vertical Cylinders
5343S01815
Junior™ Universal Dial 20# Cylinders
5343S01791
Junior™ Universal Dial 33.5# Cylinders
5343S01824
Junior™ Universal Dial 43# Cylinders
5323S01789
5909S02799
5909S02772
5323S01791
Junior Direct Read Dials for 3/4” NPT Gauges
™
Part #
Description
5343S01992
Junior™ Universal Dial 33.5# Cylinders
5343S01993
Junior™ Universal Dial 43# Cylinders
5374S02445
Junior Snap-On Dial 20 & 33.5# Duel Use Cylinders
5714S02591
Junior™ Snap-On Dial for 7384-4021
™
5343S01992
5714S02591
Junior Direct Read Dials for 1” NPT Gauges
™
Part #
Description
5364S01951
Junior™ Snap-On Dial for 8981 Series Gauges
5364S02383
Junior™ Snap-On Dial for 8944 Series Gauges
Gauges
Senior™ Direct Read Dials
Part #
Description
5844S01749
Senior Dial for LPG - For Above ground use
5002S00002
Senior™ Dial for NH3 - For Above ground use
5364S01951
™
5844S01749
276
Gauge Dials — Other
Universal Dial Kit
Fits any LPG Float Gauge ever built. Complete instructions with each kit.
Part #
Description
3181-01749
3180-17001
3181-01848
3180-18002
Universal Dial Kit for Junior
Universal Dial Kit for Senior
NH3 Universal Dial Kit for Junior
NH3 Universal Dial Kit for Senior
Advanced Matrix Film TwinSite™
The TwinSite™ is a magnetically-driven, variable-resistance sender with plotted lead
wires. Senders are utilized on both mobile and stationary applications where direct reading plus an electrical signal to a remote receiver are required. Models are available to fit
all Rochester Junior™, liquid-level gauges equipped with our large Alnico drive magnet.
Part #
IP5628S02537
IP5630S02538
P5638S02542
IP5663S02527
P5632S02539
P5679S02560
Description
Junior TwinSite™ Sender
(For GM)
Junior TwinSite™ Sender
(For Ford & Chrysler)
Junior TwinSite™ Sender
(For Ram Van)
Junior TwinSite™ Sender
(For Ford)
Junior TwinSite™ Sender
Switch
Junior TwinSite™ Sender
(For Ram Truck)
Resistance
Range
0-90Ω
7.0-10Ω
Part #
105-10Ω
IP5752S02599
20-15Ω
P5ABHS0285
240-30Ω
P5731S02597
112-6Ω
P5347S02040
Description
Resistance
Range
Junior TwinSite™ Sender
(For GM)
Junior TwinSite™ Sender
(For Dodge Trucks)
Junior TwinSite™ Sender
Voltage Divider
Junior TwinSite™ Sender
Switch 1⁄8 Tank
40-240Ω
240-30Ω
0-10Ω
NA
Magnetel ™ Replacement Dials
Direct Read Dials
Part #
R3D Ready Dials
Description
5015S01403 8” Dial Chamber - Combo for LPG & NH3 - 3% to 97%
5015S00480
8” Dial Chamber - Any Liquid - 3% to 97%
8” FLUORESCENT Dial Chamber 5ARYS03045
Combo for LPG & NH3 - 3% to 97%
4” Dial Chamber - Any Liquid 5016S00445
Rough Rider - 5% to 95%
4” Dial Chamber - Combo for LPG & NH3 5137S01262
Rough Rider - 5% to 95%
4” FLUORESCENT Dial Chamber 5AXYS03045
Combo for LPG & NH3 - Rough Rider - 5% to 95%
Part #
Description
Magnetel R3D Ready 8” Dial Chamber less TS Sender
5AACS02783
& Wire - Combo for LPG & NH3 - 3% to 97%
Magnetel R3D Ready 8” FLUORESCENT Dial Chamber less
5ARWS03066
MR Module & Wire - Combo for LPG & NH3 - 3% to 97%
Magnetel R3D Ready 4” Dial Chamber less TS Sender
5ABPS02906
& Wire - Combo for LPG & NH3 - 5% to 95%
5ANTS03047 Magnetel R3D Ready 4” Dial Chamber less MR Module
5APKS03045
Magnetel R3D Ready 4” FLUORESCENT Dial Chamber less
MR Module & Wire - Combo for LPG & NH3 - 5% to 95%
5ARYS03045
5AACS02783
5ARWS03066
5137S01262
5AXYS03045
5ANTS03047
5APKS03045
Gauges
5015S01403
277
Gauge Accessories
Magnetel ™ Mounting Flanges
Tank-mounting flanges are not included with Magnetel™ Gauges
and should be ordered separately.
NOTE: Flanges welded to tank with top and bottom holes on the
ver tical centerline are standard with Rochester Gauges. When
the flange is attached so that the bolt holes span the centerline
(see drawing at the right), add the prefix “X” to the Magnetel™
gauge model number.
Magnetel Mounting
Part #
0022-00029
0022-00030
0022-00500
0022-00525
Description
“A”
Forged Steel 2 1⁄2” NPT
Threaded Neck Flange
Forged Steel Donut Type No Neck Weld Flange
Forged Steel Weld
Neck Flange
2” NPT Sched 80 Threaded
Neck Flange (Must be
installed on gauge by mfg.)
“B”
2 3⁄8” 2 1⁄2” NPT
Center Line
Bolt holes on center line
“C”
2 5⁄16”
–
–
–
2 3⁄8”
Weld
2 5⁄16”
2 1⁄2”
2” NPT
2 1⁄16”
3
4 ⁄4"
“C”
“A”
“B”
Straddle
Bolt holes span center line
1"
Senior Gauge Mounting
Part #
Description
0022-05210
Forged Steel Welding Flange Only
0022-05211
Forged Steel Threaded 2” MNPT
Replacement Magnetel ™ Parts
Part #
Description
0003-00005
0003-00408
0015-00010
0015-00451
0015-00019
0040-00413
0093S00001
0093-00403
Glass crystal for 8” dial
Tempered glass crystal for 4” dial
Gasket under 8” crystal, two required
Channel gasket for 4” crystal
Mounting flange gasket – Spiral-wound stainless steel, Teflon filled
Stainless steel dial screw for 4” dial
4” dial chamber mounting bracket
8” dial chamber mounting bracket
Easy View Angle Mount Dial Kit with
4” Direct Read Dial and angle brackets
Easy View Angle Mount Dial Kit with
4” Fluorescent Direct Read Dial and angle brackets
0059-00299
0059-00300
Magnetel Transmitter
This transmitter is designed to fit Rochester model 6342 and 6360
Magnetel™ Float gauges with 8" dials. The transmitter provides a
current output of 4-20 mA proportional to the liquid volume in a
horizontal storage tank.
Description
R6315-00012
4-20mA Transmitter
Gauges
Part #
278
0059-00299
0059-00300
Gauge Accessories
Screws
Part #
Description
0040-00414
Screw for Junior Gauge Head–
Combination Slotted or Phillips
0040-00415
Screw for Senior Gauge Head–
Combination Slotted or Phillips
0040-00413
Screw for Junior Gauge Head–
Stainless Steel for 4” Dial
0040-00416
0040-00438
0040-00445
Junior
Senior
Screw for Jr & Sr Dial Mounting
Sr Stainless Steel Head Screws
5/15” - 24 x 7⁄8”
Jr Stainless Steel Head Screws
1
⁄4” - 28 x 7⁄8”
Screw for Senior Gauge Head–
N-Serv A6480 Series
Jr Stainless Screws for Brass Gauge
0040-00675
Head 1⁄4” - 28 x 5⁄8”
0040-00478
Gaskets, LP Gas
Flat Buna N
Part #
Description
0015-00004
Senior Gauge Gasket
0015-00007
Junior Gauge Gasket
0015-00019
Spiralwound Gasket, Teflon filled for SS Head
0015-00022
Senior Gauge O-ring
0015-00021
Junior Gauge O-ring
Drill and Tap Kit for Jr. & Sr. Head Percentage Gauges
Includes: Guide, screws, drill bits and threader for Sr. & Jr. Dials.
Part #
Description
TAPKIT
Drill and tap kit for. Jr. & Sr. Gauges
Gauges
Senior
Junior
279
OPD Valve Gauge Assembly
OPD Valve Gauge Assembly
Includes all safety features of standard OPD valves with the added benefit of
a visual gauge. Designed for installation in DOT cylinders.
Part #
Description
OPD-5
5 lb cylinder OPD valve, 3.0” dip tube
OPD-10
10 lb cylinder OPD valve, 3.6” dip tube
OPD-20-GAUGE
OPD-30-GAUGE
OPD-40
Gauge for 20 lb cylinder OPD valve
with dial, 4.0” dip tube
Gauge for 30 lb cylinder OPD valve
with dial, 47” dip tube
40 lb cylinder OPD valve, 6.4” dip tube
OPD-DIAL
Dial only for the OPD-20-GAUGE and
OPD-30-GAUGE
20# steel DOT cylinder with sight gauge CYL20-OPD-SG
SureFlame
OPD-DIAL
OPD-40
Gauges
OPD-20-GAUGE
280
Tank Monitoring Equipment
Streamline Distribution With Robertshaw Centeron™
Using non-intrusive, wireless tank-level monitors and advanced software, the Centeron™ system provides accurate, daily listings of tanks ready and
near-ready for fills, making unnecessary trips and emergency fills an expensive thing of the past. Fact is, Centeron™ can cut your refill trips by up to
50 percent. These unprecedented cost efficiencies make the economical Centeron™ system an ideal, profit-building solution for both non-degree-day
and degree-day sensitive operations. It’s the convenient, money-saving way to streamline your entire LPG distribution process.
The Centeron™ transmitter is attached to the tank gauge and
accurately measures tank levels and then sends the data to the
Centeron™ controller (located inside the house) using robust DSSS wireless technology. The Centeron™ tank level monitor (TLM) includes sensing and FCC license-free RF telemetry capabilities. The sensor head
screws on the existing float level gauge. Low cost installation and no
maintenance.
Centeron™ Tranmitter features:
1. Magnetically adheres to the tank
2. No field calibration
3. Applies to domestic and bulk storage tanks
4. Reports tank level and outside temperature
5. No hard wiring required, “wireless”
Domestic Tank Monitoring Packages
Part #
Description
(includes 5 ft. cable)
Part #
Intervals
in Minutes
TM-GM060EE
TM-GM120
TM-GM240EE
60
120
240
TM-GM60
TM-TC001EAINN
TM-TC001EAINT
TM-TC001EBINN
TM-TC001ECINN
Temperature
Inputs
Sensor
No
Yes
No
No
Description
Cellular Propane Monitor for Class 1, Grp D,
DG0000-A-IS
Div 1 locations – Monitor only (Use w/ Storage Dial)
Cellular Propane Monitor for Class 1, Grp D,
DG0001-A-IS
Div 1 locations – Includes 5’ Harness Assy/Module
IS Cellular Propane
Monitor for Tank
Monitoring
The Centeron Intrinsically Safe
Cellular Propane Monitor is the first
cellular propane monitor approved
for use in flammable atmospheres
Controller/Receiver
Part #
IS Cellular Propane Monitor
Part #
TM-RPS000N-R Single-Tank PKG-Rochester JR-No Temp Cont
TM-RPS000N-T
Single-Tank PKG-Taylor JR-No Temp Cont
TM-RPS000T-R Single-Tank PKG-Rochester JR-W/Temp Controller
TM-RPS000T-T
Single-Tank PKG-Taylor JR-W/Temp Controller
Transmitters
The Centeron™ controller receives wireless signals from Centeron™ monitor and then sends the data to the district host center or to our secure data
center for use in operations management.
Centeron™ Controller features:
1. Uses DSSS broadband technology which is far superior to any other
available
2. Easily attaches to any phone
3. Will not interrupt a conversation in progress
4. Can be remotely programmed for tank level thresholds, call windows
and telephone numbers
5. Unique phase and diverse antenna arrangement eliminates noise, fading,
and signal blocking commonly found when using narrow band technology
1:1
1:1
4:1
20:1
TM-TC1NT
Gauge Dials & Harnesses
Domestic
Part #
Description
5909S02733
5986S02733
5987S02787
5988S02788
TM-GSU05R
Rochester R3D JR Dial
Rochester R3D SR Dial
JY Taylor R3D Style A Dial
JY Taylor R3D Style B Dial
5 ft. cable for G/UG GM monitors
Cellular Monitor Features:
• New Class I, Division I, Group D certified cellular monitors - Approved for
use in flammable atmospheres
• Simplified installation - no
phone landline access or power
required
• Optional GPS pinpoints exact tank
location for locating mobile and nonfixed assets
• Low and high-level alarms
• Fill detection, theft detection, flexible
reporting schedule & end-of-month
reporting features included
• Works with traditional call blocks
Bulk Storage
Part #
TM-GSHB10A
TM-GSLRH10
Accessories
Part #
5323S02787/88
5909S02733
Description
TM-SIC86640 Serial interface cable- Controller to PC RS232 port
281
Gauges
TM-GSLRH10
TM-GSLSH10
TM-GSLTH10
Description
10 ft. harness assy. w/sensor
F/LG 8” & 4” dial replacement
8” Magnetel Dial w/10 ft. cable
4” Magnetel Dial w/10 ft. cable
8” Taylor Dial w/10 ft. cable
Pressure Gauges & Accessories
Pressure Gauges
Especially designed in a variety of sizes and construction for the LP Gas & anhydrous ammonia industry.
Part #
Pressure
Range
Dial Size
J440
0-15#
1-1/2”
Case
Material
Brass
2411
J1442
0-30#
2”
Connection
1/8” Bottom
1/4” M. NPT
1/4” Bottom
J2042
1/4” Back
Steel
2434-2
2434A-2
35” w.c. &
20 oz. (dual)
29276
0-35” w.c.
5575
1/8” hose
2-1/2”
1/4” hose
Brass
1/4” M. NPT
Steel
1/4” Bottom
Brass
1/4” M. NPT
948
0-60#
J1446
2”
J1448
0-100#
5576
J1456
Steel
J1458
948
2”
0-300#
1/8” Bottom
1/4” Bottom
1/4” M. NPT
J2058
Brass
J5563
J1458
4-1/2”
1/4” Back
1/4” Bottom
J1446
Liquid Filled Pressure Gauges
Pressure
Range
Part #
1008AL-30
0-30#
1008AL-300
0-300#
Dial
Case
Connection
Size Material
⁄4” bottom
1
Steel
1008AL-400
1008SB-400
2”
⁄4” back
1
1008SSB-400
0-400#
1008AL-400
Stainless
Steel
1008SS-400
⁄4” bottom
1
NH3 Pressure Gauges
Part #
Pressure Dial
Case
Connection
Range
Size Material
W0160
0-60#
W0162
0-150#
W0164
0-400#
2 1⁄2”
Stainless
Steel
⁄4” bottom
1
W0164
W0162
Pressure Gauge Snubbers
Gauges
Protects pressure gauge from shocks and pulsations.
Part #
Description
Size
PL631-54
54# Stainless Steel Orifice
1/4” FNPT x 1/4” MNPT
282
PL631-54
Pressure Gauge Accessories
Test Gauge Assemblies
Part #
Description
G64-030
Test Gauge Assembly, 3⁄4 M.NPT, W/30PSI 2” Gauge
G66-030
Test Gauge Assembly, 3⁄4 F.NPT, W/30PSI 2” Gauge
G66-060
Test Gauge Assembly, 3⁄4 F.NPT, W/60PSI 2” Gauge
LEAK TEST KIT
Flexible Block Test Apparatus with 0-300 psi Pressure Gauge,
Vent Valve, Shut-Off Valve and M.POL X F.POL connection.
LEAK TEST KIT
G66-030
G64-030
Water Manometer Kit
The water manometer kit is especially suited for use with low pressure LPGas systems. It is ideal for pressure checks downstream of the low pressure
regulator and at the appliances.
Part #
Description
1212 KIT
M12F
A-201
B808
C808
Flexible Tube Water Manometer Kit
Green replacement fluid - 3/4 oz bottle
9’ piece of rubber tubing
Rigid Tube Water Manometer without manifold
Rigid Tube Water Manometer with manifold
1212KIT
C808
Magnehelic® Differential Pressure Gauge
Magnehelic® gauge is highly accurate with a guarantee within 2% of
full scale. Using simple, frictionless Magnehelic movement, it quickly
indicates low air or non-corrosive gas pressures — either, negative
(vacuum) or differential. The design resists shock, vibration and overpressures. No manometer fluid to evaporate, freeze or cause toxic or
leveling problems.
Portable Unit Includes: Carrying case, Magnehelic Gauge, 9 ft of
3/16” I.D. rubber tubing, stand-hang bracket and terminal tube with
holder. Standard Accessories: Two 1/8” NPT plugs for duplicate pressure taps, two 1/8” pipe thread to rubber tubing adapter and three flush
mounting adapters with screws.
2020
Pressure
Temperature Dial
Case
Accuracy Overpressure
Range
Limits
Size Material
0 - 20”
of Water
+/- 2%
of full scale
25 psig
20 to 140°
4”
Die Cast
Aluminum
Mounting
Orientation
Connection
Vertical
1/8” F. NPT
Gauges
Part #
Note: Do Not use with Hydrogen gas. Dangerous reactions will occur.
283
Thermometers & Flow Indicator
LP & NH3 Bimetal Thermometers
These 2", bimetallic thermometers are commonly used on LP-Gas
& NH3 storage tanks, bobtails, and transports. They are recommended for use only with thermowells.
The thermometer is made of type 304 stainless steel, and the
crystal is made out of extra-heavy, curved glass. The aluminum
dial has a white face with large black numbers for easy readability. Actuation is by means of a highly sensitive bimetal element,
dampened to minimize vibration, attached to a pointer. The unit
is hermetically sealed.
Standard Features
• 1⁄2" MNPT
• Dual Scale Calibration:
-90° to +130°F, -70C to +50C, other ranges available
Part #
Description
1750-00115
1750-00009
1
⁄2" NPT Pipe Thread
“A”
Dimension
1750-00114
.08"
4”
2” Bimetallic
Thermometer
1750-00012
6”
9”
12”
“A”
Flow Indicator
Indicates direction of flow of compatible liquids in pipelines at
working pressures up to 600 psig up to 160°F. The indicator
must be installed in pipeline tees.
Specify Part Number and “A” Dimension
Part #
Length
6286-00325
3 1⁄4”
6286-00475
4 3⁄4”
Other lengths available on special order.
Tee Size
“A”
Dimension
1 1⁄4” x 1 1⁄4” x 1 1⁄4”
2” x 2” x 2”
3 1⁄4”
2 ⁄2” x 2 ⁄2” x 2”
1
1
“A”
3” x 3” x 3”
2 1⁄2” x 2 1⁄2” x 2 1⁄2”
w/2 1⁄2” x 2” bushing
4 3⁄4”
3” x 3” x 3”
w/3” x 2” bushing
The distance from the top of the mounting adapter to the end of the vane is the
“A” dimension. This dimension is dependent on the tee size, as shown above.
Gauges
Replacement Dial
Part #
5013S00048
284
Download