Metal Zinc
Electroplated
Downward-Pressure
Wringers
FEATURES
• All metal construction makes
wringer strong and durable.
• Welded basket construction –
no bolts or rivets to loosen.
• Solid-steel gear shaft will not
bend or break.
• Return spring is located outside
of the bucket and is less likely to
corrode.
• Malleable iron one-piece
pressure bars. Stronger, more
durable than other materials.
• Pressure-fit handle is welded to
the shaft. Will not loosen; no
nuts or bolts.
The Geerpres downward-pressure wringer is responsible for
more clean floors than any wringer of its type in history.
Here’s why: Geerpres wringers work with gravity, pushing
water straight down in the bucket without splash or overflow.
Simple, one-stroke operation makes these wringers up to
three times more efficient than other designs. Features
include a solid-steel gear shaft for durability, doublestaggered metal gears for solid, slip-proof operation, and
long-wearing steel bushings where the gear shaft enters the
side plates for superior durability. Welded and riveted
construction, plus zinc electroplating make Geerpres’ allmetal downward-pressure wringers as long-lasting as they
are efficient.
The Ergonomic Models of Geerpres’ Metal Zinc Electroplated
Downward-Pressure Wringers have an ergonomic handle to
help combat Repetitive Strain Injuries (RSI’s) with a unique
design that requires less effort and minimum bending – yet
still delivers 95% more pressure than the leading plastic
wringer.
• Ergonomically designed handle
on Ergo models. Minimum
bending; reduces fatigue and
stress related to repetitive
bending; less force to wring out
a mop.
• Cushioned vinyl grip on
standard wringers and a
cushioned ergonomic grip on
Ergo wringers.
Ergo Floor-Prince® Wringer
• Electroplated after fabrication for
superior corrosion resistance.
• Reinforced basket bottom on
larger models prevents distortion
of basket.
MODEL #71010
Floor-Prince® Wringer
MODEL #1010
Metal Zinc
Electroplated
Downward-Pressure
Wringers
Specifications
MODEL #1021
Floor-Knight®
Wringer
Description: All metal, downward-pressure, constructed with
interlocking rack and round gears.
Material: Zinc electroplated steel, (Knight – 18 gauge, Prince & King –
20 gauge) or heavier throughout with 11-gauge steel reinforcing
bar welded to basket bottom on 1010, 1015, 71010 & 71015
models.
Pressure Bars: One-piece annealed malleable iron.
Gear Shaft: Solid cold-rolled steel; supported with steel bushings at
wringer side plates.
Handle: Heavy-gauge electroplated steel tubing, pressure fit into a
resistance-welded steel nipple.
Hand Grips: Standard metal downward-pressure wringer has
cushioned grip and Ergo wringers have a cushioned ergonomic
grip.
MODEL #1015
Floor-King®
Wringer
Capacity and Net Weight
Mop
Capacity
Net
Weight
#1021 Floor-Knight® and #71021 Ergo Floor-Knight®
8–16 oz.
11 lbs.
#1010 Floor-Prince® and #71010, Ergo Floor-Prince®
and #1005 Floor-Prince High Security/Prison
16 -24 oz.
17 lbs.
#1015 Floor-King® and #71015 Ergo Floor-King®
24-36 oz.
19 lbs.
Zinc Electroplated Downward-Pressure Wringers
MODEL #71021
Ergo Floor-Knight®
Wringer
Model #
Description
Case Pack
1021
Floor-Knight® Wringer (8-16 oz. mops)
Each
1010
Floor-Prince® Wringer (16-24 oz. mops)
Each
1015
Floor-King® Wringer (24-36 oz. mops)
Each
1005
Floor-Prince® Wringer (16-24 oz. mops)
(For High Security / Prison Use)
Each
Ergonomic Zinc Electroplated Downward-Pressure Wringers
Model #
71021
Product ID# 1021/0514
Description
Case Pack
Ergo Floor-Knight® Wringer (8-16 oz. mops)
MODEL #71015
71010
Ergo
Ergo Floor-King®
Wringer
71015
Ergo Floor-King® Wringer (24-36 oz. mops)
Floor-Prince®
Wringer (16-24 oz. mops)
Each
Each
Each