M1 – Mitre™ Large Scale TYPE • Full cutoff reflectors • 150 to 400 watt HID (HPS and PSMH) • Cast aluminum construction • Type 2, 3, 4, 5 and forward throw distribution • Molded memory retentive silicone gaskets • Easy access to the lamp and ballast • Powder coat finish in 13 standard colors with a polymer primer sealer 1. LUMINAIRE 2. LAMP/BALLAST 3. COLOR 1. LUMINAIRE 3. COLOR POLE MOUNTED (WT: 46 lbs EPA: 2.0; IP: 55). Flip over on a 5" O.D. pole. Horizontal reflector M1P-H2 (Type2) M1P-H3 (Type3) M1P-H4 (Type4) M1P-H5 (Type5) WH Arctic White BL Black BLT Matte Black DB Dark Bronze DGN Dark Green TT Titanium WDB Weathered Bronze MDB Bronze Metallic Forward throw reflector M1P-FT WALL MOUNTED (WT: 46 lbs EPA: 2.0; IP: 55) Horizontal reflector M1WD-H2 (Type2) M1WD-H4 (Type4) SPECIFICATIONS VBU Verde Blue CRT Corten MAL Matte Aluminum MG Medium Grey AGN Antique Green LG Light Grey RAL Premium Color CUSTOM * * Contact Factory M1WD-H3 (Type3) Forward throw reflector M1WD-FT 4.OPTIONS 2. LAMP/BALLAST PULSE START METAL HALIDE (120/208/240/277 volt ballast) Mogul base, ED-28 lamp 150PSMH 250PSMH320PSMH 350PSMH400PSMH M1 4. OPTIONS QL (Socket for a T-4 mini-can halogen lamp. Must be field wired to a separate 120 volt circuit. Lamp wattage not to exceed ballast wattage) QRS (Quartz restrike controller and socket for a T-4 mini-can halogen lamp. Not required with electronic ballast. Lamp wattage not to exceed ballast wattage) LA (12" long arm extension for 5"/127 mm O.D. pole) 347 (120/277/347 volt ballast) HSS (House Side Shield. Not for Type 5. Factory installed) HIGH PRESSURE SODIUM (120/208/240/277 volt ballast) Mogul base, ED-23 1/2 lamp 150HPS Mogul base, ED-18 lamp 200HPS 250HPS400HPS All ballasts are factory wired for 277 volts, unless specified. Lamps not included. For horizontal reflector models with PSMH mogul base ballasts, use a lamp approved for horizontal burning. HOUSING The fixture housing shall be a one-piece cast 356 aluminum back and integral arm, with a minimum wall thickness of .188 inch. The housing shall have cast in place threaded inserts for mounting the electrical components. The door frame shall be cast of 356 aluminum. The door frame shall be attached to the housing with two stainless steel hinges and opened by loosening four captive stainless steel fasteners. The door frame shall seal to the housing with a molded memory retentive silicone gasket. The cast arm shall be contoured to fit a five inch diameter pole. The wall mounting plate shall be cast aluminum and fully gasketed. The lens shall be clear tempered glass, sealed to the cast aluminum door frame with a silicone gasket and held in place with eight clips around the perimeter. The optical assembly shall consist of a housing module with die formed, specular Alzak® reflector panels. The reflector module shall be removable for easy access to the ballast. The reflector system(s) shall be tested by an independent testing laboratory and classified as IES full cutoff optics. ELECTRICAL The sockets are mogul base, pulse rated porcelain. Fixtures shall have the ballast assembly installed, wired and tested prior to shipment. FINISH Fixture finish consists of a five stage pretreatment regimen with a polymer primer sealer, oven dry off and top coated with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance specification which includes ­passing a 3000 hour salt spray test for corrosion resistance. See next page JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 2.15 NOTES | 1 | M1 – Mitre™ Large Scale TYPE Photometric Report CERTIFICATION CATALOG NUMBER: DIMENSIONS The fixture is listed with ETL for outdoor, wet location use, UL1598 and Canadian CSA Std. C22.2 no.250. FILENAME: M1PFT.IES Wednesday, July 11, 2012 LTG RSCH LAB: 789-1B 25.5 650mm MANUFACTURER: ARCHITECTURAL AREA LIGHTING WARRANTY / TERMS AND CONDITIONS OF SALE CATALOG #: M1PFT-400SMH Download: 24" X 25.5" FRONT-THROW UNIT W/SPECULAR SEGMENTED REFLECTOR http://www.hubbelllighting.com/resources/warranty/ STUCCO PATTERN TOP REFL & CLEAR FLAT GLASS LENS LAMP TYPE: 400-W CLR SUP MET HAL LAMP LUMENS: 40000 SUMMARY DATA EFFICIENCY (Total): EFFICIENCY (Down / Up): EFFICIENCY (Street / House): ROADWAY CLASSIFICATION: CUTOFF CLASSIFICATION: LUMENS/LAMP: NO. OF LAMPS: LUMINOUS OPENING: Width: Length: Height: INPUT WATTS: 54.9 % 54.9 % / 0.0 % 42.5 % / 12.4 % TYPE III, VERY SHORT CUTOFF 40000 1 RECTANGULAR 1.30 (Feet) 1.50 0.00 450 24in 1 in 610 mm 27.75in in 20.5 1 mm in 705 mm 520 WEIGHT: 46 lbs Photometric Report EPA: 2.0 CATALOG NUMBER: IP: 55 Wednesday, July 11, 2012 FILENAME: M1PH3.IES REPORT # : LRL 1094-6C MANUFACTURE : ARCHITECTURAL AREA LIGHTING CATALOG # : M1P-H3 24" X 25.5" UNIT W/SEMISPECULAR TYPE III REFL & HAMMERTONE M1PFT WATTAGE:ISO-ILLUMINANCE 450 LUMENDIAGRAM OUTPUT: 22017 (fc) 20" X CLEAR FLAT GLASS LENS HORIZONTAL LAMP. TOTAL WATTS = 295 UG LAMP TYPE : 1 - 250-WBCLR MH(not determined) 0.01 LAMP LUMENS : 20500 0.2 FORWARD LIGHT LUMEN 0.02 0.5 o 0.05 SUMMARY DATA 13.9% 3059 FL30 1. 0.1 2. 38.1%8385 FM60 o 72.1 EFFICIENCY (Total): % 5. o EFFICIENCY (Down / Up): % / 0.0 %5396 24.5% FH80 72.1 EFFICIENCY (Street / House): 49.5 % / 22.6 % o 0.6%138 10. FVH90 ROADWAY CLASSIFICATION: TYPE III, SHORT CUTOFF CLASSIFICATION: FULL CUTOFF BACK LIGHT LUMENS/LAMP: 20500 NO. OF LAMPS: 2383 BL30 o 1 10.8% LUMINOUS OPENING: RECTANGULAR o BM60 0.0010.1% 2230 Width: (Feet) o Length: BH80 0.001.6% 356 Height: 0.00 BVH90 o 2950.2% 51 INPUT WATTS: UPLIGHT UL100 o UH180 o 0% 0% 10 15 20 25 30 35 40 45 50 4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160 Mounting Height =HEIGHT 20 Feet. Each box represents one mounting height. 16' MOUNTING WATTAGE: 295 LUMEN OUTPUT: 14766 EFFICACY: 50.1 Lm/W ISO-ILLUMINANCE DIAGRAM (fc) B3 U0 G3 Mounting Reported data calculated from manufacturer's data file, based on IESNA recommended methods. FORWARD LIGHT Photometric Viewer v3.4 8.0% FL30 FM60 o 31.1% FH80 o 9.0% FVH90 o 0.3% o AAL reserves the right to change product specifications without notice. Mounting UPLIGHT Height 0%Multiplier DOWNLIGHT 55% ------------------------ + = Point of max candela 8 0 M1PH3 EFFICACY: 48.9 Lm/W LUMEN 1178 4591 4327 41 BACK LIGHT BL30 o BM60 o BH80 o BVH90 o 6.2% 17.1% 7.9% 0.2% 915 2521 1159 35 UPLIGHT UL100 o UH180 o 0% 0% 0 0 0.01 0.02 0.05 0.1 0.20.5 1. 2. UPLIGHT Height 0%Multiplier DOWNLIGHT 72% ------------------------ 5. 10 15 20 25 30 35 40 45 50 4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160 + = Point of max candela Mounting Height =HEIGHT 20 Feet. Each box represents one mounting height. 16' MOUNTING IES files can be found at www.aal.net ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 Reported data calculated from manufacturer's data file, based on IESNA recommended methods. P 626.968.5666 | F 626.369.2695 | www.aal.net Photometric Viewer v3.4 Copyright © 2012 | REV 2.15 | 2 |