Mold Protection System
Flexvision
TM
Our Vision is Focused on Your Mission
Lamp
Camera stand
Various Lens
Mobile trolley
!
Caution
- Please read the “instruction manual” carefully before using
the device for proper handling.
FLEXV PTE LTD
61 BUKIT BATOK CRESCENT #04-01C,
SINGAPORE 658078
TEL: (65)63165331
FAX: (65)63165334
Web : www.flexv.com.sg
Email : sales@flexv.com.sg
Suite 1803, Dragon Pearl Plaza
No.2123 pudong AVE, Shanghai 200135 P. R. C
Web : www.flexv.com.sg
Email : sales@flexv.com.sg
Agent Contact
Company profile
Our Vision
Be the market leader in
vision system integrator.
Our Mission
To understand and
fulfill customer needs.
Our Focus
To seek continuous improvement and
create value added products.
Common problems of
Precision molder
• Part stuck in cavities and cores.
• Ejector/Slide core/Core Puller failure.
• Metal Insert mis load.
• Bad and good parts are mixed together.
Flexvision Help
• Mold will not close if parts are stuck.
• Stop molding cycle if ejector/ slide core/ core puller is in wrong position.
• Interrupt process cycle if metal insert is improperly loaded.
• Disable ejection if bad parts are produced.
FVE300 Series
Ambient Temperature
Humidity
Weight
Dimension
Touch Screen Monitor
Size
Resolution
Power
Monitor Cable
8” TFT LCD
800 x 600 pixels
12 VDC Max. 15 W
4.5 meters
Input/ Output Module
Camera
Max. Camera
Camera Lens
Power
Operating Temp.
Camera Cable
2no. (4no. Upon Request)
FA2/3” F1.4/ 12 mm
(Standard)
12 VDC ± 10 % Max. 15 W
5~45 ˚C
5 meters
Interfacing Kit
Power Supply Cable
Interfacing Cable
Power Supply Module
Power Supply Module
5 meters
5 meters with jumper plug.
220 VAC/ 12 VDC
Max. 8 Amp
Lamp with Magnetic Stand
Unit
Bulb
Electric Supply
Holding Power
1 no. Standard
60 W
220 VAC/1 ph/50 hz
80 kg
Magnetic Camera Stand
Camera Holder
Holding Power
Ø6 mm
80 kg
Optional Program Upgrade
Double Color Molding
Vertical Turntable Molding
Insert Molding
Available
Available
Customise
short mould parts
parts missing
core puller faulty
slide core faulty
Ejection
Watch 2
To detect
parts stuck
missing or improper
loaded insert
broken ejector pin
Mold closed for
next cycle
Main function
Vertical turntable molding and Double color molding
FVE 300 Series
0.03 sec
4 IN/ 6 Out
(no voltage contact)
0~40 ˚C
Max. 85 %
3 kg
29 x 23 x 8 cm
Watch
1
To detect
FVE400 Series
Other software available
Main Microprocessor Unit
Model
Minimum Process Time
Working Principle
Short molded parts
Parts stuck
Main Microprocessor Unit
Model
Minimum Process Time
Ambient Temperature
Humidity
Weight
Dimension
FVE 400 Series
0.03 sec
2 IN/ 6 Out
(no voltage contact)
0~40 ˚C
Max. 85 %
1.6 kg
25 x 17 x 6.5 cm
Touch Screen Monitor
Size
Resolution
Power
Monitor Cable
8” TFT LCD
800 x 600 pixels
12 VDC Max. 15 W
4.5 meters
Input/ Output Module
Main features
Other application
Mold protection
Tape and rail
Object search
Off line Inspection
• 16 ROI (Region of interest) per camera.
• Individual sensitivity setting for each ROI during each
watch.
• Various pixel size option improves system ability and
sensitivity.
• “inspection on” interlock function prevent machine run
without in operation.
• Max. 2 High resolution progressive camera per system.
• Easy access and control using touch screen input.
• “Auto-Retry” function prevent false alarm and unnecessary
stoppage.
• Password security allow locking of selected function.
• 30 days real-time logging the data of production fault.
• Automatic detection of camera failure.
• Real-time I/O monitoring.
• Built in I/O board, cheaper to move system around.
• View zooming function.
• 4 point screen calibration function.
• “initial start” function prevent mold damage at first
closing.
• Select 1 watch or 2 watch per molding cycle.
• Concealed console with large heat sink minimize dust and
over heat problem.
Camera
Max. Camera
Power
Operating Temp.
Camera Cable
2no.
FA2/3” F1.4/12 mm
(Standard)
5 VDC ± 10 % Max. 15 W
5~40 ˚C
4.5 meters
Interfacing Kit
Power Supply Cable
Interfacing Cable
Power Supply Module
Power Supply Module
5 meters
5 meters with jumper plug.
220 VAC/ 12 VDC
Max. 8 Amp
Lamp with Magnetic Stand
Unit
Bulb
Electric Supply
Holding Power
1 no. Standard
60 W
220 VAC/1 ph/50 hz
80 kg
Magnetic Camera Stand
Camera Holder
Holding Power
Ø6 mm
80 kg
Camera Lens