AGENA 720 LED
Specification
Agena produces subtle indirect lighting from a simple
post-top luminaire. Multiple rings encircle the etched glass
lens allowing a warm glow to radiate outward. Three cast
aluminum struts angle outward to support the concave spun
aluminum secondary reflector, finished in high-reflectance
paint. Signature stepped steel pole shows no visible
seam and has flush handhole cover. Steel pole is hot-dip
galvanized prior to being finished in finely textured paint.
Spun aluminum base cover. Standard colors; matte silver
grey metallic or graphite grey. Special colors available.
Model
Lamp Color Temperature
AA720
LED
WW -3000K
NW - 4000K
Volt
UNV 120-277V
Mounting
A - Post Top
Pole
Option
DIM - 0-10vDC
13SS - 13' Stepped Steel SG - Silver Grey Dimming
13SA - 13' Stepped
B - Twin Mount Aluminum
X - Other (specify)
Finish
GG - Graphite
Grey
N - None
CC - Custom
Color
Ordering Information
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Pole Mounted Luminaire > AGENA
http://www.hessamerica.com/Products/Lighting/Pole_Mounted_Luminaire/AGENA/
Page 1
AGENA 720 LED
Specification
HOUSING
Luminaire consists of base, lens with decorative ring assembly, and secondary reflector with support struts. Decorative ring
assembly surrounding lens is secured to the base with socket head cap screws and consists of aluminum rings separated by
spacers. Simple cast aluminum luminaire base with integral slip fitter anchors three cast aluminum indirect reflector support
struts with socket head cap screws and provides mounting surface for the optical assembly. Borosilicate glass lens has clear
top with etched sidewalls and is sealed by compression to the luminaire base with single piece closed cell rubber gasket
when the decorative ring assembly is installed. Top ring of assembly is separated from the glass lens with single piece ''D''
profile silicone gasket to prevent glass to metal contact. Spun aluminum indirect reflector is finished in high-reflectance white
paint. Luminaire slip fits pole top tenon and has built-in stop to limit insertion depth to 4.5''. Slip fitter and pole shall have
matching diameters to provide a smooth transition to the luminaire. Two offset rows of three 8mm recessed setscrews secure
the luminaire to the pole. All hardware is stainless steel.
OPTICS
Single COB LED is positioned within polycarbonate reflector producing a 40° beam. The reflector with specular metallic finish,
protected by clear coat, projects light upward through the clear borosilicate top lens onto the secondary reflector, providing a
symmetrical Type V distribution. Etched sidewall on lens provides a subtle radiant glow for accenting. Secondary reflector is
finished with white powder coat finish on the underside for increased efficiency.
ELECTRICAL
Electronic LED driver 1050mA drive current to the CoB LED. Universal driver accepts input voltage range from 120v to 277v at
50/60Hz. Power consumption is 41 watts. Power factor is greater than 0.95. Optional 0-10v dimming available on request.
DELIVERED LUMENS / BUG RATING
3000K: 2201 lumens / B1-U3-G1
4000K: 2305 lumens / B1-U3-G1
NOTE: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at
the discretion of HessAmerica. Consult factory for current technical data.
LUMINAIRE WEIGHT: 15 LBS
LUMINAIRE EPA: 1.7 SQ FT
POLE WEIGHT: 65 LBS (Aluminum)
POLE
Stepped steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal
wall thickness of 0.142''. Pole shall show no seam along shaft. Decorative ring between upper and lower shaft is secured with
three recessed setscrews. Flush mounted hand hole cover is plasma cut with kerf not to exceed 1/8'' and includes triangular
tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.
Base cover is one-piece 0.080'' spun aluminum and finished to match the pole. Nominal pole height is 13'.
Contact factory for aluminum pole.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey.
Special colors available on request.
CERTIFICATION: CSA/US Certified for Wet Locations
INGRESS PROTECTION: IP54
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Pole Mounted Luminaire > AGENA
http://www.hessamerica.com/Products/Lighting/Pole_Mounted_Luminaire/AGENA/
Page 2
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Pole Mounted Luminaire > AGENA
http://www.hessamerica.com/Products/Lighting/Pole_Mounted_Luminaire/AGENA/
Page 3
Additional information
Dimensions
Mounting Detail
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Pole Mounted Luminaire > AGENA
http://www.hessamerica.com/Products/Lighting/Pole_Mounted_Luminaire/AGENA/
Page 4