WET LED 2X2
DATE
JOB NAME
TYPE
Applications
Applications
Features
• Heavy duty construction
• Welded steel housing with
white enamel finish
• Dust and moisture resistant
• Hinges from either side using die
formed steel pin hinges
Series Size
WET LED
LED System
Color Temp
Voltage
• Carwash
• Parking Garages
• Ships and Marine
Vessels
• Dusty Environments
Voltage
Mounting
Options
2x2
LTG1- Standard
LTG2- Low
LTG3- High
C- Custom Package
(Consult Factory)
3000K
3500K
4000K
5000K
120
277
UNV
T–Tee Grid*
F–Flange Kit for
Sheetrock
SG - Slot Grid
*Standard Tee is
9/16’’. Must
specify if 15/16’’
Ordering Example: WET LED-2X2-LTG2-4000K-UNV-SG-DB
EM-EM Pack
DB- Dimming (0-10V)
LDB3- Lutron Dimming
Driver (1% 3-wire control)
LDBD- Lutron Dimming
Driver (1% Digital
EcoSystem)
WH- Whips
LED System Information
Options:
NOMINAL
PACKAGE
NOMINAL
SYSTEM WATTS
NOMINAL
DELIVERED LUMENS
29.5W
2905m
LTG1
(STANDARD)
LTG2
(LOW)
27W
2695Lm
LTG3
(HIGH)
33W
3215Lm
Color
Temperature
Pro-rate:
CCT
OUTPUT
3000K
95%
3500K
97%
4000K
100%
5000K
103%
***FOR ANY CUSTOM LED PACKAGE REQUESTS CONSULT FACTORY
Details
Application Features: Specification grade, recessed, enclosed and
Electrical: Integral Driver.
gasketed troffer with clear prismatic #12 pattern acrylic lens. For use in indoor
and exterior canopy applications where an LED moisture and dust resistant troffer Approvals: Union made, manufactured in the US, and UL Listed 1598 (Wet
is required. Available in 1x4, 2x2 and 2x4 configurations.
Location - Covered Ceiling Only).
Construction: Die formed and spot welded, 20 ga. cold rolled steel housing
and door frame. Diffuser held within hinged door frame door by spring clips,
hinges from either side using steel pin hinges and gasket ensures seal between
door frame assembly and housing. All fasteners are plated or corrosion
resistant. Sufficient knock-outs provided on side of housing for flexible conduit
attachment.
Finish: Powder painted high reflectance white.
October 2014
Mounting: Recessed mounting for T-Bar or with Flange Kit for sheetrock
ceiling installations.
Optics: Clear prismatic #12 pattern extruded acrylic lens (lens may be mounted
smooth face down for better seal to door frame).
Options: Emergency Battery Backup, Dimming Ballast, Separate Circuit, 6’
Whips.
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com WET LED 2X2
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE.
ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY
OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.
WET LED 2X2
Model
A
1X4
2X2
2X4
11 3/4’’
23 3/4’’
23 3/4’’
CC
B
47 3/4’’
23 3/4’’
47 3/4’’
48’’
24’’
48’’
A
A
A
3-15/16"
C
CROSS SECTION 2-LAMP
2 X 2 –2 X 4
C
TOP VIEW
2X2
C
TOP VIEW
2X4
3-15/16"
B
ACCESS PLA
TE
SIDE VIEW
1 X 4 –2 X4
October 2014
Coronet Inc. | Phone: 973-345-7660 | Fax: 973-345-8705 | www.coronetled.com WET LED 2X2
DISCLAIMER: CORONET INC RESERVES THE RIGHT TO MAKE ANY DESIGN CHANGES FOR CONTINUOUS IMPROVEMENT WHICH WILL NOT AFFECT THE OVERALL APPEARANCE OR PERFORMANCE.
ALL CEILINGS ARE TO BE ADEQUATELY REINFORCED BY OTHERS BEFORE INSTALLATION. ALL FIXTURES ARE TO BE WIRED BY A CERTIFIED ELECTRICIAN ONLY. THIS INFORMATION IS PROPERTY
OF CORONET INC., AND THE INFORMATION IT CONTAINS MAY NOT BE USED WITHOUT ANY WRITTEN CONSENT OF CORONET INC.