Pre-formance™
Giving you the convenience of a pre-fabricated
product—plus the flexibility to accommodate
job-site requirements
CHEC_45234_PreFormance_Bro.indd
1
1/15/08
11:52:05 AM
™
IEC
309 Non-Metallic
Plugs, Receptacles & Interlocks
Pre-formance
We Give You A
Total Solution
PRE-formance provides:
•Labor savings
•Lower total cost of ownership
•S
kill set allocation to match job
requirements
•E
limination of unproductive and
expensive spot buying
•Elimination of material job site “piles”
•Reduction of overages and scrap
PRE-formance products from Cooper
Crouse-Hinds combine the labor and
time-saving benefits of a pre-fab product
with the ability to accommodate design
changes in the field.
Don’t waste time on your next job
roughing it—put new PRE-formance
products to work for you today.
2
CHEC_45234_PreFormance_Bro.indd
2
1/15/08
11:52:11 AM
PRE-formance™ Table of Contents
Product
Description
Page
Boxes with Pre-installed
Ground Screw & Pigtail
Choose from our wide selection of outlet boxes with
ground screw and pigtail lead—available from stock!
4
Fire Alarm Boxes
Meet the NEC® requirements for fire circuit identification
with the convenience and the savings of PRE-formance
5
4" Square Bracketed
Outlet Boxes
Bracketed boxes offer quick and easy installation onto
either side of a steel stud
6
Uni-Mount™ Covers
& Assemblies
Provides a secure box support with built-in plaster ring
7&8
Telescoping Slider
Assemblies
Adjustable pre-fab bracket for mounting between studs
9
Floor Mount Assemblies
Sturdy and flexible. Positions center of box 15", 18" or 24"
above floor
10
Floor Mount Slider
Combo Assemblies
Sturdy and flexible. Positions center of box 15", 18" or 24"
above floor
11
Single & Double Sided
Box Support Assemblies
Labor-saving, built-in and adjustable far-side supports,
double sided box support can be installed on either side
of stud without repositioning
12
Multiple Box Mounting
Assemblies
Provides support for multiple boxes or plaster rings
13
Open Box Support
Mounting Assemblies
Provides adjustable support for multiple boxes or
plaster rings
14
T-Bar Fasteners
Assemblies
Provides box support between T-bar rails
15
Custom Assemblies
Customize an assembly to meet your specific
job requirements
16-19
3
CHEC_45234_PreFormance_Bro.indd
3
1/15/08
11:52:23 AM
Boxes with Pre-installed Ground Screw & Pigtail
Features
•W
ide selection of boxes available from inventory to meet tight
job schedules.
•P
re-installed ground screw and pigtail lead simplifies ordering
and receiving and saves valuable time.
Pre-installed ground screw and pigtail
Ordering Information
Catalog
Number
TP288PF
TP290PF
TP292PF
TP338PF
TP367PF
TP403PF
TP404PF
TP431PF
TP438PF
TP451PF
TP454PF
TP456PF
TP521PF
TP523PF
TP556PF
Description
4D Octagon Box 1/2" KO
with Ground Screw & Lead
4D Octagon Box 3/4" KO
with Ground Screw & Lead
4D Octagon Box 1/2 & 3/4" KO
with Ground Screw & Lead
4 Oct MCI Cable Outlet Box S Set
1/2 Brkt with Ground Screw & Lead
4D Octagon Box for AC/MC S
Bracket, with Ground Screw & Lead
4D 1/2 & 3/4 KO Welded Box
with Ground Screw & Lead
4 SQ 1/2 & 3/4 KO Welded Box
with Ground Screw & Lead
4 SQ MCI Box with
Ground Screw & Lead
4D Drawn Box 1/2 & 3/4 Concentric
KO with Ground Screw & Lead
4D Welded Box with VMS Bracket
with Ground Screw & Lead
4 SQ MCI Box with
Ground Screw & Lead
4 SQ MCI Box with F Bracket,
Ground Screw & Lead
4-11/16" 2-1/8" Deep Welded Box
with Ground Screw & Lead
4-11/16" 1-1/2" Deep Welded Box
with Ground Screw & Lead
4-11/16" 2 1/8" Deep Drawn Box
with Ground Screw & Lead
Depth
Size
Cubic In.
Capacity
Bracket
2-1/8"
21.5
2-1/8"
Knockouts
Std.
Wt. Lbs.
Unit Pkg. Per 100
Sides
Bottom
–
4-1/2"
3-1/2", 2-3/4"
25
64
21.5
–
4-3/4"
3-1/2", 2-3/4"
25
64
2-1/8"
21.5
–
2-1/2", 2-3/4"
3-1/2", 2-3/4"
25
64
2-1/8"
21.5
"S" Bracket,
Set 1/2
4-Cable, 1-1/2"
1-1/2"
25
82
1-1/2"
15.5
Adjustable Bar
–
–
25
100
2-1/8"
30.3
–
84
21
–
2-1/2", 2-1/2"
+ 3/4"E
2-1/2", 2-1/2"
+ 3/4"E
25
1-1/2"
50
72
2-1/8"
–
–
1-1/2"
25
91
2-1/8"
30.3
–
3-1/2", 2-3/4"
25
84
2-1/8"
30.3
VMS
2-1/2", 2-1/2"
+ 3/4"E
25
96
1-1/2"
22
–
1-1/2"
50
92
1-1/2"
22
"F", Set Flush
8-1/2", 4-1/2"
+ 3/4"E
8-1/2", 4-1/2"
+ 3/4"E
4-Cable, 4-1/2",
2-1/2" & 3/4"E
4-1/2", 6-1/2"
+ 3/4"C
6-1/2", 3-1/2"
+ 3/4"E
4-Cable, 4-1/2",
2-1/2" & 3/4"E
4-Cable, 2-1/2",
1-1/2" & 3/4"E
1-1/2"
25
92
2-1/8"
44
–
12-1/2" & 3/4" C
2-1/2", 2-3/4"
25
115
1-1/2"
29.5
–
12-1/2" & 3/4" C
2-1/2", 2-3/4"
25
99
2-1/8"
42
–
8-1/2", 4-3/4"
3-1/", 2-3/4"
25
104
4
CHEC_45234_PreFormance_Bro.indd
4
1/15/08
11:52:26 AM
Fire Alarm Boxes
Features
•R
ed epoxy paint allows for quick identification of fire alarm
systems meeting NEC requirements.
•E
liminate the need to paint boxes on the job site, saving
time and expense.
•A
vailable in 4" and 4-11/16" square and 4" octagon, 1-1/2"
and 2-1/8" deep welded or drawn construction and
with extension rings to meet customer requirements
or preferences.
TP404RED
TP423RED
TP414RED
TP434RED
TP403RED
TP428RED
TP472RED
TP556RED
TP564RED
TP568RED
TP451RED
TP292RED
Ordering Information
Catalog
Number
Description
Depth
Size
Cubic In.
Capacity
Bracket
TP404RED
4" Sq Box Shallow Welded
1-1/2"
22
–
TP423RED
4" Sq Box Shallow Welded
1-1/2"
22
VMS
TP414RED
4" Sq Box Shallow Drawn
1-1/2"
21
TP434RED
4" Sq Deep Drawn
1-1/2"
TP403RED
4" Sq Box Deep Welded
TP451RED
Knockouts
Std.
Unit Pkg.
Wt. Lbs.
Per 100
50
72
25
81
3-1/2", 2-3/4"
50
67
8-1/2", 4-3/4"
3-1/2", 2-3/4"
25
84
8-1/2", 4-1/2"
& 3/4" E
6-1/2", 3-1/2"
& 3/4" E
2-1/2", 2-1/2"
& 3/4" E
2-1/2", 2-1/2"
& 3/4" E
25
84
25
96
–
8-1/2", 4-3/4"
–
50
46
–
–
–
–
50
31
2-1/8"
42
–
8-1/2", 4-3/4"
3-1/2", 2-3/4"
25
104
4-11/16" Sq Extension Ring
2-1/8"
42
–
8-1/2", 4-3/4"
–
25
84
TP568RED
4-11/16" Sq Flat Blank Cover
–
–
–
–
–
25
40
TP292RED
4" Octagon Deep Outlet Box
2-1/8"
21.5
–
2-1/2", 2-3/4"
3-1/2", 2-3/4"
25
64
Sides
Bottom
8-1/2", 4-1/2"
& 3/4" E
6-1/2", 3-1/2"
& 3/4" E
2-1/2", 2-1/2"
& 3/4" E
2-1/2", 2-1/2"
& 3/4" E
–
8-1/2", 4-3/4"
30.3
–
2-1/8"
30.3
–
4" Sq Box Deep Welded
2-1/8"
30.3
VMS
TP428RED
4" Sq Extension Ring
1-1/2"
21
TP472RED
4" Sq Flat Blank Cover
–
TP556RED
4-11/16" Sq Box Deep
TP564RED
5
CHEC_45234_PreFormance_Bro.indd
5
1/15/08
11:52:35 AM
4" Square Bracketed Outlet Boxes
Bracketed boxes offer quick and easy installation onto either side of a steel stud. For use with conduit, armored/metal clad
cable or non-metallic sheathed cable.
Features
• Special spring steel allows for quick and easy tool-free installation.
• Mounts on either side of the stud and can be easily removed
or repositioned.
• Sleek, low profile mounting bracket.
• Far side support bracket provides support for boxes in
2-1/4"–4" studs.
• Far side support snaps easily onto box and is secured in place
by plaster ring.
• Available in shallow and deep boxes for use with conduit,
armored/metal clad cable or non-metallic sheathed cable.
TP404SSB
TP444SSB
TP454SSB
TP403SSB
TP450SSB
TP431SSB
TP563SSB
Ordering Information
Description
Catalog
Number*
Box Size
Box Depth
For Use With
Cubic Inch
Capacity
Sides
Bottom
TP404SSB
4"
1-1/2"
Conduit
22
8-1/2", 4-1/2" & 3/4" E
2-1/2", 2-1/2" & 3/4" E
TP444SSB
4"
1-1/2"
Non-metallic
Sheathed Cable
22
4 Cable, 4-1/2", 2-1/2" &
3/4" E
1-1/2"
TP454SSB
4"
1-1/2"
Armored/Metal
Clad Cable
22
4 Cable, 4-1/2", 2-1/2" &
3/4" E
1-1/2"
TP403SSB
4"
2-1/8"
Conduit
30.3
8-1/2", 4-1/2" & 3/4" E
2-1/2", 2-1/2" & 3/4" E
TP450SSB
4"
2-1/8"
Non-metallic
Sheathed Cable
30.3
4 Cable, 4-1/2", 2-1/2" &
3/4" E
1-1/2"
TP431SSB
4"
2-1/8"
Armored/Metal
Clad Cable
30.3
4 Cable, 4-1/2", 2-1/2" &
3/4" E
1-1/2"
TP563SSB
4-11/16"
2-1/8"
Conduit
42
6-1/2", 6-1/2" & 3/4" C
3-1/2", 2-3/4"
* to include ground screw with 8" solid pigtail ground lead, add suffix "PF" to catalog number. Example: TP404SSBPF
6
CHEC_45234_PreFormance_Bro.indd
6
1/15/08
11:52:39 AM
Uni-Mount ™ Covers
The Uni-Mount combines the features of a mounting device plate with those of a box support,
giving you one universal plate for all your needs. Specifically designed for
use with metal and wood studs:
• Available in 1/2", 5/8" and
3/4" raised.
• Fast and easy installation.
• Can be used in multiple
applications, resulting
in less items to stock.
• Guide tabs ensure
consistent alignment
on stud.
• Less labor intensive.
• Stud alignment hole
ensures consistent
mounting height.
• Less material handling.
• Rigid bracket design
eliminates the need
for far side support.
• Can be used in Class 2
communications outlets for
low voltage without a box.
• Available as a single
or two device cover.
• UL Listed and CSA certified.*
• No multiple assemblies
to handle.
• Universal design fits
all 4" square boxes.
R
Single Gang
Two Gang
Ordering Information
Catalog Number
Description
Capacity Cu. In.
Std. Unit Pkg.
Wt. Lbs. Per 100
TP30000
1/2" Raised
3.8
50
43
TP31000
5/8" Raised
4.3
50
46
TP32000
3/4" Raised
5.5
50
50
TP35000
1/2" Raised
6
50
38
TP36000
5/8" Raised
8
50
52
TP37000
3/4" Raised
9
50
54
—
1000
.5
SINGLE GANG
TWO GANG
LOW PROFILE SCREWS—reduces risk of sheet rock bulge
TP710
L.P. Screws
* CSA requires a far side support.
7
CHEC_45234_PreFormance_Bro.indd
7
1/15/08
11:52:42 AM
Uni-Mount ™ Assemblies
Features
•Uni-Mount provides a secure box support and features a
built-in plaster ring.
TP404
1-1/2" Deep–Welded
22" Cubic Capacity
•C
an be field assembled with outlet box for power applications
or used without a box for low voltage applications.
•Pre-fab Uni-Mount is available with most popular outlet
boxes with a choice of 1/2", 5/8" or 3/4" raised cover and
includes ground screw and lead.
•Rigid bracket design eliminates the need for far-side support. TP403
21/8" Deep–Welded
22" Cubic Capacity
•Guide tabs ensure alignment on studs.
Catalog
Number
For Conduit
Description
Pre-Fabricated Box and Cover (no ground screw or lead)
TP30414
TP31414
TP32414
TP35414
TP36414
TP37414
TP30434
TP31434
TP32434
TP35434
TP36434
TP37434
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Drawn
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
to
to
to
to
to
to
to
to
to
to
to
to
1/2"
5/8"
3/4"
1/2"
5/8"
3/4"
1/2"
5/8"
3/4"
1/2"
5/8"
3/4"
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Capacity
Std.
Cu. In. Unit Pkg.
Wt. Lbs.
Per 100
24.8
25.3
26.5
27
29
30
34.1
34.6
35.8
36.3
38.3
39.3
25
25
25
25
25
25
25
25
25
25
25
25
110
113
117
105
119
121
127
130
134
122
136
138
24.8
25.3
26.5
27
29
30
34.1
34.6
35.8
36.3
38.3
39.3
25
25
25
25
25
25
25
25
25
25
25
25
114
117
121
109
123
125
134
137
141
129
143
145
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
115
118
130
113
122
121
110
124
119
126
107
110
114
102
116
118
For AC/MC Cable
TP30454
TP31454
TP32454
TP35454
TP36454
TP37454
TP30431
TP31431
TP32431
TP35431
TP36431
TP37431
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
Box
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
assembled
to
to
to
to
to
to
to
to
to
to
to
to
1/2"
5/8"
3/4"
1/2"
5/8"
3/4"
1/2"
5/8"
3/4"
1/2"
5/8"
3/4"
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Single Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
Two Gang Uni-Mount Cover
TP436
2-1/8" Deep–Welded
30.3" Cubic Capacity
TP467
1-1/2" Deep–Welded
22" Cubic Capacity
TP414
1-1/2" Deep–Welded
21" Cubic Capacity
Pre-Fabricated Box, Cover, Ground Screw and Lead Assembly (with ground screw and lead)
For Conduit
TP30404PF
TP31404PF
TP31436PF
TP31467PF
TP32404PF
TP32454PF
TP35404PF
TP36404PF
TP36467PF
TP37404PF
TP30403PF
TP31403PF
TP32403PF
TP35403PF
TP36403PF
TP37403PF
1-1/2"
1-1/2"
2-1/8"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
2-1/8"
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Welded
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
Box,
1/2"
5/8"
5/8"
5/8"
3/4"
3/4"
1/2"
5/8"
5/8"
3/4"
1/2"
5/8"
3/4"
1/2"
5/8"
3/4"
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Raised
Single Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Two Gang Uni-Mount Cover, ground screw and lead
Two Gang Uni-Mount Cover, ground screw and lead
Two Gang Uni-Mount Cover, ground screw and lead
Two Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Single Gang Uni-Mount Cover, ground screw and lead
Two Gang Uni-Mount Cover, ground screw and lead
Two Gang Uni-Mount Cover, ground screw and lead
Two Gang Uni-Mount Cover, ground screw and lead
25.8
26.3
34.6
26.3
27.5
27.5
28
30
30
31
34.1
34.6
35.8
36.3
38.3
39.3
TP434
2-1/8" Deep–Welded
30.3" Cubic Capacity
TP454
1-1/2" Deep–Welded
22" Cubic Capacity
TP431
2-1/8" Deep–Welded
30.3" Cubic Capacity
8
CHEC_45234_PreFormance_Bro.indd
8
1/15/08
11:52:47 AM
Telescoping Slider Assemblies
Features
•The industry’s only fully adjustable pre-fab bracket—fits a
range of stud spacings and both 1-1/2" and 2-1/8"
deep boxes.
•Box can be attached to slider bracket before or after slider
is installed on telescoping bracket.
•Box location can be field-adjusted by moving slider along
telescoping bracket.
•Pre-assembled units available with two (2) boxes
if desired.
BB216TS-1104D shown
Telescoping Slider Assemblies — Catalog Number Guide
BB216TS - 1 10 4D
Stud
Spacing
Plaster
Ring Style
BB216TS = 11" – 18" 1 = One Device
BB224TS = 15" – 26" 2 = Two Device
R = Round
Blank = box only
2nd Box If Desired
Plaster
Ring Size
04 = 1/4" Raise
08 = 1/2" Raise
10 = 5/8" Raise
12 = 3/4" Raise
16 = 1" Raise
20 = 11/4" Raise
Blank = box only
Box
Style
4 = 4" Square, 11/2" Deep
4D = 4" Square, 2 1/8" Deep
5 = 411/16" Square, 11/2" Deep
5D = 411/16" Square, 2 1/8" Deep
436 = 4" Square, 2 1/8" Deep, 1" KO
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Plaster
Ring Style
1 = One Device
2 = Two Device
R = Round
Blank = box only
- 1 4D
Box
Style
4 = 4" Square, 11/2" Deep
4D = 4" Square, 2 1/8" Deep
5 = 411/16" Square, 11/2" Deep
5D = 411/16" Square, 2 1/8" Deep
436 = 4" Square, 2 1/8" Deep, 1" KO
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Ground
Wire
Blank = Solid Ground Wire
A = Stranded Ground Wire
N = No Ground Wire
Ground
Wire
Blank = Solid Ground Wire
A = Stranded Ground Wire
N = No Ground Wire
* Add N if no ground wire is required on 2nd box
These products are designed for positioning only. No load rating.
9
CHEC_45234_PreFormance_Bro.indd
9
1/15/08
11:52:50 AM
Floor Mount Assemblies
Features
•Precisely positions center of electrical box 15", 18", or 24"
consistently above finished floor.
•Far-side support designed for 4", 3-1/2" and 2-1/2" studs.
Far-side support can be positioned after box is installed.
•Can gang up with other support brackets for multiple box
and low-voltage mounting.
•Can be kicked under floor track or installed inside with a
single screw for quick, easy and secure installation.
BFM184-1105D shown
Floor Mount Assemblies­­ — Catalog Number Guide
BFM184 - 1 10 4D
Bracket
Height
Plaster
Ring Style
BFM154 = 15"
1 = One Device
BFM184 = 18"
2 = Two Device
BFM244 = 24"
R = Round
Blank = box only
Plaster
Ring Size
04 = 1/4" Raise
08 = 1/2" Raise
10 = 5/8" Raise
12 = 3/4" Raise
16 = 1" Raise
20 = 11/4" Raise
Blank = box only
Box
Style
4 = 4" Square, 11/2" Deep
4D = 4" Square, 2 1/8" Deep
5 = 411/8" Square, 11/2" Deep
5D = 411/16" Square, 2 1/8" Deep
436 = 4" Square, 2 1/8" Deep, 1" KO
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Blank = Plaster Ring Only
Ground
Wire
Blank = Solid Ground Wire
A = Stranded Ground Wire
N = No Ground Wire
These products are designed for positioning only. No load rating.
10
CHEC_45234_PreFormance_Bro.indd
10
1/15/08
11:52:52 AM
Floor Mount Slider Combo Assemblies
Features
•Rigid box support positions center of electrical box 15",
18" or 24" above floor and securely attaches to studs.
•The fully adjustable bracket fits a range of stud spacings
with 1", 1-1/2" or 2 -1/2" deep boxes. •Box location can be field-adjusted by moving slider along
telescoping bracket.
•Assembly available with multiple boxes.
BFM15-S16-1104D shown
Floor Mount Slider Combo Assemblies­­ — Catalog Number Guide
BFM15 - S16 - 1 10 4D
Bracket
Height
Stud
Spacing
Plaster
Ring Style
Plaster
Ring Size
BFM15 = 15"
S16 = 11" - 18"
1 = One Device
BFM18 = 18"
S24 = 15" - 26"
2 = Two Device
BFM24 = 24"
R = Round
Blank = box only
2nd Box If Desired
Box
Style
04 = 1/4" Raise
08 = 1/2" Raise
10 = 5/8" Raise
12 = 3/4" Raise
16 = 1" Raise
20 = 11/4" Raise
Blank = box only
Plaster
Ring Style
- 1 4D
4 = 4" Square, 11/2" Deep
Blank = Solid Ground Wire
4D = 4" Square, 2 1/8" Deep
A = Stranded Ground Wire
5 = 411/16" Square, 11/2" Deep
N = No Ground Wire
5D = 411/16" Square, 2 1/8" Deep
436 = 4" Square, 2 1/8" Deep, 1" KO
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Box
Style
1 = One Device
2 = Two Device
R = Round
Blank = box only
Ground
Wire
Ground
Wire
4 = 4" Square, 11/2" Deep
Blank = Solid Ground Wire
4D = 4" Square, 2 1/8" Deep
A = Stranded Ground Wire
5 = 411/16" Square, 11/2" Deep
N = No Ground Wire
5D = 411/16" Square, 2 1/8" Deep
436 = 4" Square, 2 1/8" Deep, 1" KO
560 = 411/16" Square, 2 1/8" Deep, 1" KO
These products are designed for positioning only. No load rating.
11
CHEC_45234_PreFormance_Bro.indd
11
1/15/08
11:52:52 AM
Single and Double Sided Box Support Assemblies
Features — Single Sided Assemblies
•Far-side support prevents box movement in wall cavity.
•Adjustable far-side supports designed to reduce labor.
• BB4-6 works on 6", 5-1/2", 3-1/2", and
2-1/2" studs.
• BB4-4 works on 4", 3-1/2", and 2-1/2" studs.
•Brackets may be piggy-backed in series or attached to
Floor Mount Box Supports (see page 10).
BB423-2104D shown
Single Side Assemblies — Catalog Number Guide
BB423 - 1 10 4D
Stud
Depth
Plaster
Ring Style
BB423 =
1 = One Device
3 1/2" & 2 1/2"
2 = Two Device
BB44 =
R = Round
4", 3 1/2" & 2 1/2"
Blank = box only
BB46 =
6", 5 1/2", 3 1/2" & 2 1/2"
Plaster
Ring Size
Box
Style
04 = 1/4" Raise
08 = 1/2" Raise
10 = 5/8" Raise
12 = 3/4" Raise
16 = 1" Raise
20 = 11/4" Raise
Blank = box only
4 = 4" Square, 11/2" Deep
4D = 4" Square, 2 1/8" Deep
5 = 411/16" Square, 11/2" Deep
5D = 411/16" Square, 2 1/8" Deep
436 = 4" Square, 2 1/8" Deep, 1" KO
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Blank = Plaster Ring Only
Ground
Wire
Blank = Solid Ground Wire
A = Stranded Ground Wire
N = No Ground Wire
Features — Double Sided Assemblies
•Double side box support designed for pre-fab installations.
Unit can be installed on either side of stud without
repositioning box or devices.
•Adjustable far-side supports designed to reduce labor.
Three different sizes pre-bent for 3-1/2", 4" or 6" studs.
•Mounting bracket options accommodate stud depth from
2-1/2" – 6".
•Stands up to drywallers; far side supports prevent box
movement in wall cavity.
BB73-1104D shown
Double Sided Assemblies — Catalog Number Guide
BB73 - 1 10 4D
Stud
Depth
Plaster
Ring Style
BB73 =
1 = One Device
3 1/2" & 2 1/2"
2 = Two Device
BB74 =
R = Round
4", 3 1/2" & 2 1/2"
Blank = box only
BB76 =
6", 5 1/2", 3 1/2" & 2 1/2"
Plaster
Ring Size
04 = 1/4" Raise
08 = 1/2" Raise
10 = 5/8" Raise
12 = 3/4" Raise
16 = 1" Raise
20 = 11/4" Raise
Blank = box only
Box
Style
4 = 4" Square, 11/2" Deep
4D = 4" Square, 2 1/8" Deep
5 = 411/16" Square, 11/2" Deep
5D = 411/16" Square, 2 1/8" Deep
436 = 4" Square, 2 1/8" Deep, 1" KO
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Blank = Plaster Ring Only
Ground
Wire
Blank = Solid Ground Wire
A = Stranded Ground Wire
N = No Ground Wire
These products are designed for positioning only. No load rating.
12
CHEC_45234_PreFormance_Bro.indd
12
1/15/08
11:52:56 AM
Multiple Box Mounting Assemblies
Features
•Provides support for multiple boxes or plaster rings
between studs 16" or 24" on center.
•Available factory assembled with plaster rings and/or
boxes with ground wire to reduce labor.
•Custom factory assemblies are ordered by specifying
plaster rings and/or boxes for each bracket position.
BB816-104D shown
Pos 1
Pos 2
Pos 1
Pos 3
Pos 2
BB816-084D-2XX shown
Pos 3
BB824-084D-X1XX shown
Multiple Box Mounting Assemblies — Catalog Number Guide
BB816 - 08 4D
Stud
Spacing
Plaster
Ring
Electrical
Box
- X X X X
Ground
Wire
BB816 = 16"
04 = 1/4" Raise
4 = 4" Square, 11/2" Deep
Blank = Solid Ground Wire
1
BB824 = 24"
08 = /2" Raise
4D = 4" Square, 2 1/8" Deep
A = Stranded Ground Wire
10 = 5/8" Raise
5 = 411/16" Square, 11/2" Deep
N = No Ground Wire
12 = 3/4" Raise
5D = 411/16" Square, 2 1/8" Deep
16 = 1" Raise
436 = 4" Square, 2 1/8" Deep, 1" KO
1
20 = 1 /4" Raise
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Blank = Box Only, Blank=Plaster Ring Only, for position
for position
options 3 and 4 only
options 5
or 9 only
Position Position Position Position
1
2
3
4
1 = One Device and box
2 = Two Device and box
3 = One Device plaster ring only
4 = Two Device plaster ring only
5 = Box only
R = Round plaster ring and box
6 = One Device and box, no ground wire
7 = Two Device and box, no ground wire
8 = Round plaster ring and box,
no ground wire
9 = Box only, no ground wire
X = No Attachments
Position 4 Available Only with
4 Position (24" Stud Spacing Bracket)
These products are designed for positioning only. No load rating.
13
CHEC_45234_PreFormance_Bro.indd
13
1/15/08
11:52:59 AM
Open Box Support Mounting Assemblies
Features
•Open design allows infinite adjustability, box can be
placed in any horizontal location.
•New open box support secures boxes and plaster
rings between studs 16" and 24" on center.
•Stamped markings at 1/4", 1/2" and 1" increments
allow the installer to easily locate the desired
box position.
•Custom factory assemblies are ordered by specifying
box location for each position.
BB724-104D-776X shown
BB716-104D-76X shown
BB724-104D-776X shown
Open Box Support Mounting Assemblies — Catalog Number Guide
BB716 - 10
Stud
Spacing
Plaster
Ring
4D
- X X X X
Electrical
Box
Ground
Wire
BB716 = 16"
04 = 1/4" Raise
4 = 4" Square, 11/2" Deep
Blank = Solid Ground Wire
1
BB724 = 24"
08 = /2" Raise
4D = 4" Square, 2 1/8" Deep
A = Stranded Ground Wire
10 = 5/8" Raise
5 = 411/16" Square, 11/2" Deep
12 = 3/4" Raise
5D = 411/16" Square, 2 1/8" Deep
16 = 1" Raise
436 = 4" Square, 2 1/8" Deep, 1" KO
1
20 = 1 /4" Raise
560 = 411/16" Square, 2 1/8" Deep, 1" KO
Position Position Position Position
1
2
3
4
1 = One Device and box
2 = Two Device and box
R = Round plaster ring and box
6 = One Device and box, no ground wire
7 = Two Device and box, no ground wire
8 = Round plaster ring and box,
no ground wire
X = No Attachments
Position 4 Available Only with
4 Position (24" Stud Spacing Bracket)
These products are designed for positioning only. No load rating.
14
CHEC_45234_PreFormance_Bro.indd
14
1/15/08
11:53:01 AM
T-Bar Fastener Assemblies
Fixture Hanger Assembly Features
•Preassembled T-Bar fasteners speed installation.
•Boxes have 1/2" and 3/4" knockouts.
•A
vailable with 4" square or octagon outlet boxes to meet
customer preference.
•A
vailable with extension ring attached for additional cubic
capacity requirements.
•Loading not to exceed 50 lbs. without independent
support. 35 lbs. in Canada.
Catalog Number
Description
BA50-OB-24
1-1/2" deep octagon box
to T-Bar Fastener
BA50-OB-34
2-1/8" deep octagon box
to T-Bar Fastener
BA50-SB-24
4 Sq 1-1/2" deep drawn
box to T-Bar Fastener
BA50-OB
BA50-SB
15
CHEC_45234_PreFormance_Bro.indd
15
1/15/08
11:53:03 AM
Custom Assemblies
If you could not find an assembly in the previous pages to meet your specific
application or need to add connectors, devices, or other customizations, please
follow the steps in the next 3 pages to select an assembly that meets your needs.
Page 17 is an example of a custom assembly selection. After reviewing, use page
18 and 19 to make your own selection. Start by selecting the mounting method,
then select the appropriate box, mud ring and ground wire. You can then add
connectors and devices. If you need to specify other configurations including
various box/bracket configurations or MC whips, please specify on the 'Draw your
own request' page. After selecting the assembly that fits your needs, please fax a
copy of your selections or drawings to us at 315-477-5153 ATTN: PRE-formance
and we will evaluate and quote according to your requirements. Please email your
questions to: CCHPREformance@cooperindustries.com.
16
CHEC_45234_PreFormance_Bro.indd
16
1/15/08
11:53:10 AM
Custom Assemblies — Example Custom Assembly Selection
Example STEP 1: Select Mounting Method
Multiple Box Mounting Supports
Example of assembly after each selection
Example: Telescoping Slider
Bracket was selected
Telescoping Slider Support
√
■
11-18" Stud Spacing (BB216TS)
■
15-26" Stud Spacing (BB224TS)
Positio
box m n 2 (multiple
Pos onount, Middle
16")
Positi
box mon 3 (multip
Pos onount) Right le
16"
Positi
box mon 4 (multip
Pos onount) Right le
24"
■
Positio
box m n 2 (multiple
Pos onount, Middle
16")
Positi
box mon 3 (multip
Pos onount) Right le
16"
Positi
box mon 4 (multip
Pos onount) Right le
24"
√
■
■
■
■
Positi
box mon 4 (multip
Pos onount) Right le
24"
C) 5/8" Raised Single Device (TP489)
■
Positi
box mon 3 (multip
Pos onount) Right le
16"
Select Mud Ring
■
Positio
box m n 2 (multiple
Pos onount, Middle
16")
B) Solid
Positi
1 (S
box mon
ount) ingle
Select Ground Wire
√
■
Positi
1 (S
box mon
ount) ingle
Select Box Type
A) 4D - 4" Square 2-1/8" Deep (TP403)
Positi
1 (S
box mon
ount) ingle
Example STEP 2: Select Box, Ground Wire and Mud Ring
√
■
■
■
■
Example: 4 Square 2-1/8"
Deep Box was selected and
added to the Telescoping
slider bracket
Example: Solid Ground wire
was selected and added to the
4 Square 2-1/8" Deep Box and
telescoping slider bracket
Example: 5/8" Raised mud ring
was selected and added to the
4 Square 2-1/8" Deep Box with
ground wire and telescoping
slider bracket
Duplex Receptacle
Positi
box mon 4 (multip
Pos onount) Right le
24"
√
■
Positi
box mon 3 (multip
Pos onount) Right le
16"
■
Positio
box m n 2 (multiple
Pos onount, Middle
16")
15A 20A Select Devices (Wagos Included)
Positi
1 (S
box mon
ount) ingle
Example STEP 3: (single box mount) and 4 (with multiple box mount supports) Select Devices and/or Connectors
√ ■
■
■■
■■
■■
Example: Duplex device was
selected and added to the
telescoping slider bracket,
4 square 2-1/8" deep box,
ground wire, and mud ring
17
CHEC_45234_PreFormance_Bro.indd
17
1/15/08
11:53:24 AM
Custom Assemblies — Selection Sheet
Print a copy and fax your selection to 315-477-5153 ATTN: PRE-formance
or email to CCHPREformance@cooperindustries.com
If you could not find a selection in the previous pages, follow the steps and check the boxes next to each selection to assemble different configurations for your application.
Contact Name:___________________________________________________________
Phone: __________________________________________________________
Customer Name:_________________________________________________________
Fax/Email:_______________________________________________________
Account Number: ________________________________________________________
STEP 1: Select Mounting Method
STEP 2: Select Box, Mud Ring, & Pre-Installed Ground Wire
Use Position 1 for single mount assemblies and for 1st position multiple mount assemblies.
(Position 4 Only Available with 24" Stud Spacing)
Box 1 Box 2
Select Box Type
Single Sided Box Support
Floor Mount Support
15" Height (BFM15)
■
3-1/2" & 2-1/2" Stud Size (BB423)
■
18" Height (BFM18)
■
4", 3-1/2", & 2-1/2" Stud Size (BB44)
■
24" Height (BFM24)
■
6", 5-1/2", 3-1/2", & 2-1/2"
Stud Size (BB46)
■
Box 3 Box 4
4D 4" Square 2-1/8" Deep (TP403)
4 4" Square 1-1/2" Deep (TP404)
5D (4-11/16") Square 2-1/8" Deep (TP521)
5 (4-11/16") Square (TP523)
4" Square 2 1/8" Deep 1" KO (TP436)
4" Square Drawn 1 1/2" Deep 1/2" KO (TP410)
4" Square Welded 2-1/8" Deep 3/4" KO (TP432)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
4-11/16" Square Drawn 2-1/8" Deep 1" KO (TP560)
■
■
■
■
4-11/16" Square 1-1/2" Deep Square Drawn 1/2" 3/4" KO (TP548)
■
■
■
■
4-11/16" Square Drawn 2 1/8" Deep 1" KO (TP560)
■
■
■
■
4" Octagon Box 1-1/2" Deep 1/2" KO (TP274)
4" Square Deep Open Back Box with Cvr (TPO67)
4D 4" Square 2-1/8" Deep RED (TP403)
■
■
■
■
■
■
■
■
■
■
■
■
1/2" Raised Single device (TP484)
■
■
■
■
5/8" Raised Single device (TP489)
■
■
■
■
3/4" Raised Single device (TP486)
■
■
■
■
1" Raised Single device (TP488)
■
■
■
■
1-1/4" Raised Single device (TP490)
■
■
■
■
1-1/2" Raised Single device (tile ring) (TP528)
■
■
■
■
1/2" Raised Double device (TP498)
■
■
■
■
5/8" Raised Double device (TP499)
■
■
■
■
3/4" Raised Double device (TP500)
■
■
■
■
1" Raised Double device (TP502)
■
■
■
■
1-1/4" Raised Double device (TP501)
■
■
■
■
1-1/2" Raised Double device (tile ring) (TP540)
■
■
■
■
1/2" Raised Rnd (TP476)
■
■
■
■
■
■
■
■
Select Mud Ring Type
T Bar Fasteners
Uni-Mount Box Support
(For 4 Sq Box Only)
■
■
■
■
■
■
1/2" Raised Single Gang Cover
(TP30000)
■
T Bar Fastener (BA50)
5/8" Raised Single Gang Cover
(TP31000)
3/4" Raised Single Gang Cover
(TP32000)
Double Sided Box Support
1/2" Raised Double Gang Cover
(TP35000)
■
5/8" Raised Double Gang Cover
(TP36000)
3/4" Raised Double Gang Cover
(TP37000)
3-1/2" & 2-1/2"
Stud Size (BB73)
■
4", 3-1/2", & 2-1/2"
Stud Size (BB74)
5/8" Raised Rnd (TP477)
3/4" Raised Rnd (TP475)
■
■
■
■
1" Raised Rnd (TP479)
■
■
■
■
■
6", 5-1/2", 3-1/2", & 2-1/2"
Stud Size (BB76)
1-1/4" Raised Rnd (TP483)
■
■
■
■
HORIZONTAL MOUNTING OPTION
■
■
■
■
■
■
■
■
■
■
■
■
Select Ground Wire (Pre-Installed)
Solid
Stranded (with fork)
Floor Mount Slider Combo
Telescoping Slider Support
■
15" Height 11"-18" Stud Spcg
(BFM154S16)
■
11-18" Stud Spacing (BB216TS)
■
15" Height 15"-26" Stud Spcg
(BFM154S24)
■
15-26" Stud Spacing (BB224TS)
■
18" Height 11"-18" Stud Spcg
(BFM184S16)
■
18" Height 15"-26" Stud Spcg
(BFM184S24)
Multiple Box Mounting Supports
STEP 3: Select Commercial Device
Devices (includes leads with Wagos attached)
Single Pole ■ 15A ■ 20A
3-Way ■ 15A ■ 20A
Single ■ 15A ■ 20A
Duplex ■ 15A ■ 20A
GFI ■ 15A ■ 20A
Other Cooper Wiring Device Cat#___________
Ivory
White
Black
Other Color/Grade_____________________
Protector Plate
■ Set Screw
■ Insulated
■
■ Compression
■ Non-Insulated
24" Stud Spacing (BB824)
■ Set Screw
■ Compression
■
■ Set Screw (ACB)
■ Space Saver ACB (SSACB)
16" Stud Spacing (BB716)
■
3
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■
4
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■
24" Stud Spacing (BB724)
Please specify box distance from sides if other than standard 1st, 2nd, 3rd, or 4th
positions on open mounting brackets._ _______________________________________
1"
■
■
1/2"
3/4"
1"
■
■
2
3
4
■
Trade Size
3/8"
1/2"
3/4"
1"
■
■
■
■
Quick-Lok AC/MC Connectors
■ Quick-Lok Connector
3/4"
Trade Size
Steel AC/MC (ACB & SSACB Type Fittings)
■
2
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■
1
Trade Size
1/2"
Space Saver EMT Connectors
16" Stud Spacing (BB816)
1
■■
■■
■■
■■
■■
■■
■■
■■
■■
■■
■
STEP 4: Select Fitting Type, Size and Position
Steel EMT Connectors
■
(If 1 device mud ring — select first box.
If 2 device mud ring — 1st or 2nd box)
Trade Size
1/2"
Sgl
3/4"
1/2"
Duplex
■
■
■
18
CHEC_45234_PreFormance_Bro.indd
18
1/15/08
11:53:33 AM
Custom Assemblies — Custom Assembly Selection Sheet — Draw your own request
Print a copy and fax your selection to 315-477-5153 ATTN: PRE-formance
or email to CCHPREformance@cooperindustries.com
If you need to further customize your assembly, use this page to draw your own configuration. Submit your own assembly configuration of boxes, brackets,
devices, fittings, MC whips, etc. to us and we will evaluate and quote. Also if drawings or digital pictures are available, please forward via fax or email
(CCHPREformance@cooperindustries.com).
Lead times will vary depending on complexity of design and availability of material.
Customer Name:___________________________________________________________
Fax: __________________________________________________________________
Contact Name: _ ___________________________________________________________
Email:_________________________________________________________________
Phone: ____________________________________________________________________
Account Number:_______________________________________________________
Comments:___________________________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________________________________
Draw Your Own Assembly
19
CHEC_45234_PreFormance_Bro.indd
19
1/15/08
11:53:43 AM
For more information:
If further assistance is required, please contact an authorized Cooper Crouse-Hinds Distributor,
Sales Office or Customer Service Department:
U.S. (Global Headquarters):
Cooper Crouse-Hinds
Wolf & Seventh North Streets
Syracuse, NY 13221
(866) 764-5454
FAX: (315) 477-5179
FAX Orders Only: (866) 653-0640
crouse.customerctr@cooperindustries.com
Canada:
Cooper Crouse-Hinds Canada
Toll Free: 800-265-0502
(905) 507-4187
FAX: (866) 587-2850
Mexico:
Cooper Crouse-Hinds, S.A. de C.V.
52-555-804-4000
FAX: 52-555-804-4020
mxmercadotecnia@cooperindustries.com
Latin America/Caribbean:
Cooper Crouse-Hinds, S.A. de C.V.
52-555-804-4000
FAX: 52-555-804-4020
Europe (Germany):
Cooper Crouse-Hinds GmbH
49 (0) 6271 806-500
49 (0) 6271 806-476
info-ex@ceag.de
Middle East (Dubai):
Cooper Crouse-Hinds LLC
971-4324-1578
FAX: 971-4324-1640
Singapore:
Cooper Crouse-Hinds Pte. Ltd.
65-6297-4849
FAX: 65-6297-4819
sales@cchspore.com.sg
China:
Cooper Crouse-Hinds Pte. Ltd.
86-21-2899-3600
FAX: 86-21-2899-4055
cchsales@cooperasia.com
Korea:
Cooper Crouse-Hinds Korea
82-2-3484-6783
82-2-3484-6778
Australia:
Cooper Electrical Australia
61-2-8787-2777
FAX: 61-2-9609-2342
sales@cooperelectrical.com.au
India:
Cooper Crouse-Hinds India
91-22-6504-5150
FAX: 91-22-2404-1811
www.crouse-hinds.com
Cooper Crouse-Hinds is a trademark of Cooper Industries, Inc.
©2008 Cooper Industries, Inc.
Your Authorized Cooper Crouse-Hinds Distributor is:
Cooper Industries, Ltd.
600 Travis, Ste. 5800
Houston, TX 77002-1001
P: 713-209-8400
www.cooperindustries.com
4901-0108
CHEC_45234_PreFormance_Bro.indd
Printed in USA
20
1/15/08
11:53:44 AM