RECESSED ACCESSORIES
Hole Cutter
Nora Lighting's Hole Cutter is a versatile tool
that every installer and contractor should own.
Fully adjustable to fit virtually every recessed
requirement, the hole cutter can reduce your
cutting time in half and save you money.
With the hole cutter, there is no mess to clean
up since dust and shavings are caught in the
basket. There is also no need to use oversized
trim rings to hide mistakes, you get a perfect
round hole every time.
t Can cut drywall, plywood, plaster and
arcylic sheeting up to 7/8" (2.3cm) thick.
1-3/4" (4.5cm) thick if opposite side can
also be drilled.
t It can also be used for cutting aluminum,
brass, and metal sheets up to 1/16"
(1.00cm) thick.
t The patented product is equipped with a
transparent cowl which prevents chips from
injuring the user.
t Can work with either variable speed hand
drills or drill press.
ALL REPLACEMENT PARTS ARE AVAILABLE
380
RECESSED
NSC SERIES
CATALOG. NO.
CUTTING DIAMETER
DESCRIPTION
NSC-6500
1-3/4" to 6-3/8"
Round Hole Cutter with Adjustable Blade up to 6"
NSC-6600
1-3/4" to 7-1/2"
Round Hole Cutter with Adjustable Blade up to 8"
NSC SERIES Replacement Parts
CATALOG. NO.
DESCRIPTION
NSC-6501
Cutting Blade A for 6" and 8" Hole Cutter - cuts drywall, wood and soft material
NSC-6502
Cutting Blade B for 6" Hole Cutter - cuts metal and stucco
NSC-6503
Drill Bit for 6" and 8" Hole Cutter
NSC-6504
Upright Axle for 6" and 8" Hole Cutter
NSC-6505
Traverse Axle for 6" Hole Cutter
NSC-6605
Traverse Axle for 8" Hole Cutter
NSC-6506
Fixed Disk for 6" Hole Cutter
NSC-6606
Fixed Disk for 8" Hole Cutter
NSC-6507
Fixed Adjusting Disk for 6" Hole Cutter
NSC-6607
Fixed Adjusting Disk for 8" Hole Cutter
NSC-6508
Adjusting Rod for 6" Hole Cutter
NSC-6608
Adjusting Rod for 8" Hole Cutter
NSC-6509
Balance Bar Set for 6" Hole Cutter
NSC-6609
Balance Bar Set for 8" Hole Cutter
NSC-6710
Replacement Hexadon Nut for NCC-6500/NSC-6600
NSC-6711
Replacement Compression Spring for NCC-6500/NSC-6600