PRMS – PromenadeTM Series TYPE
•
•
•
•
•
IES full cutoff reflector systems (horizontal reflectors)
Tool-less removal of the reflector
and ballast modules
Optical grade acrylic lens will not yellow
Cast aluminum construction and stainless steel hardware for corrosion resistance
Powder coat finish in 13 standard colors with a polymer primer sealer
1. LUMINAIRE
2. LAMP/BALLAST
3. COLOR
4. OPTIONS
5. MOUNTING
3. COLOR
1. LUMINAIRE
VERTICAL LAMP, CUTOFF
PRMS V3 (Type 3)
PRMS V5 (Type 5)
HORIZONTAL LAMP, FULL CUTOFF
PRMS H2 (Type 2)
PRMS H3 (Type 3)
PRMS H4 (Type 4)
PRMS H5 (Type 5)
GLASS REFRACTOR
PRMS GR3 (Type 3)
PRMS GR5 (Type 5)
2. LAMP/BALLAST
METAL HALIDE (120/277 volt ballast)
Medium base, ED-17 lamp
70MH
100MH
50MH
G12 base, T-6 ceramic lamp
70MHT6 (Not available with GR3/GR5)
PULSE START METAL HALIDE (120/208/240/277 volt ballast)
Medium base, ED-17 lamp
150PSMH
175PSMH (For vertical reflectors base up only)
Mogul base, ED-28 lamp
250PSMH
G12 base, T-6 ceramic lamp
150PSMHT6 (Not available with GR3/GR5)
HIGH PRESSURE SODIUM (120/208/240/277 volt ballast)
Medium base, ED-17 lamp
50HPS
70HPS
100HPS
150HPS
Mogul base, ED-18 lamp
200HPS
250HPS
All ballasts are factory wired for 277 volts, unless specified. Lamps not
included. For horizontal reflector models with PSMH mogul base ballasts,
use a lamp approved for horizontal burning.
SPECIFICATIONS
Standard Color
WH Arctic White
BL
Black
BLT Matte Black
DB Dark Bronze
DGN Dark Green
TT
Titanium
WDB Weathered Bronze
MDB Bronze Metallic
VBU Verde Blue
CRT Corten
MAL Matte Aluminum
MG Medium Grey
AGN Antique Green
LG
Light Grey
Premium Color
SHK Shamrock
SPP Salt and Pepper
SFM Seafoam
WCP Weathered Copper
RAL RAL 4 digit Color
CUSTOM Custom Color 4.OPTIONS
CHC (Copper hood cover)
BHC (Brass hood cover)
CHM (Glass chimney with brass holder. Horizontal reflectors only. Not available with GR3/GR5)
LDL (Lightly diffused lens to reduce brightness and glare)
HSS (House side shield for horizontal or vertical reflectors. Factory installed. Not available for Type 5)
QL (Socket for T-4 mini-can lamp, field wired to a separate circuit. (Lamp wattage not to exceed ballast wattage). Not available for GR3/GR5)
QRS (Restrike controller and T-4 mini-can socket. Not required with electronic ballast. (Lamp wattage not to exceed ballast wattage). Not available for GR3/GR5)
347 (120/277/347 volt ballast)
PT5 (Slips over a 5" pole)
5. MOUNTING – Standard is arm mount
WALL MOUNT
WMA1M
WMA35U
WMA57
WMA22U
PRMS
WMA1L
WMA55
WM7
WMA3
WMA56
WMA9U
TRA1L
TRA6U
TRA57
SLA1-2
SLA22U
TRA3
TRA55
SLA4
PM2
PM3
HOUSING
The entire fixture shall be A356 cast aluminum,
free of any porosity, foreign materials or cosmetic
fillers. Castings shall be of uniform wall thickness,
minimum .188" with no warping or mold shifting.
The top shall hinge open by flipping up two
integral latches. The concealed latch mechanism
shall be all stainless steel. The top shall seal the
lamp compartment with a full surround, molded
silicone gasket. The lens shall be one-piece
clear, injection molded optical grade, DR acrylic,
gasketed top and bottom with silicone gaskets,
and held in place with six clips for easy lens
replacement. Quick disconnects shall be used for
all electrical connections. All internal and external
hardware shall be stainless steel.
ELECTRICAL
Ballasts shall be high power f­actor rated for -30°C
starting. The ballast shall be mounted to a cast
holder for maximum heat dissipation. Medium
base, (mogul base for 200 and 250 watt lamps)
porcelain sockets shall be pulse rated. The
electrical assembly shall be installed and prewired
in the fixture. Sockets for T-6 lamps are G12 type.
High output fluorescent lamps shall be powered
by electronic ballast and shall be rated for a
minimum starting temperature of -18º C.
MOUNTING
Post top mounting: the fixture shall slip over a
4"/100 mm O.D. pole and be secured to the pole
with three stainless steel set screws.
FINISH
Fixture finish shall consist of a five stage
pretreatment regimen with a polymer primer
sealer, oven dry off, and top coated with a
thermoset super TGIC polyester powder coat
finish. The finish shall meet the AAMA 260402 performance specification which includes
­passing a 3000 hour salt spray test for corrosion
resistance.
POLE MOUNT
TRA1M
TRA5U
TRA56
SLA1
SLA8U
PIER MOUNT
PM1
Visit www.aal.net for Arms, Poles & Accessories
Specification Guide
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 2.15
See next page
JOB
TYPE
NOTES
| 1 |
PRMS – PromenadeTM Series TYPE
CERTIFICATION
DIMENSIONS
Fixture shall be listed with ETL for outdoor, wet location
use. Conforms to the UL1598 and Canadian CSA C22.2
No.250 standard.
CATALOG NUMBER: PKWS-ANG-H3-70MHT6
Photometric
Report
Photometric Report
Wednesday, July 11, 2012
Wednesday, July 11, 2012
CATALOG NUMBER: PRMS-H3F-150MH
FILENAME:
PKWS-ANG-H3-70MHT6.IES
WARRANTY / TERMS AND CONDITIONS
OF
SALE
FILENAME: PRMS-H3F-150MH.IES
Download:
IESNA:LM-63-2002
IESNA:LM-63-2002
http://www.hubbelllighting.com/resources/warranty/
[TEST] KL02299[TEST] 16777
[TESTLAB] KIM [MANUFAC]
LIGHTING ARCHITECTURAL AREA LIGHTING
[LUMCAT] PRMS-H3F-150MH
[TESTDATE] 10-11-2010
[LUMINAIRE]
PROMENADE SERIES, PRECISION FOCUSED OPTICAL
AAL reserves the right to change product specifications
without
notice.
[ISSUEDATE]
03-16-2011
[MORE] SYSTEM, CLEAR FLAT GLASS LENS, HORIZONTAL LAMP,
[MANUFAC] ARCHITECTURAL
AREA LIGHTING
[MORE] SPECULAR REFL. TOOL-LESS ACCESS TO LAMP AND BALLAST,
[LUMCAT] PKWS-ANG-H3-70MHT6
[MORE] EASY TO REMOVE BALLAST MODULE, CAST ALUMINUM
[LUMINAIRE] PARKWAY
SQUARE
ACCENT
[MORE] HOUSING,
SUPER
TGICSCALE
POLYESTER POWDER COAT
[MORE] ALUMINUM
ANGLED
WITH CAST
ALUMINUM
HOUSING
AND
LENS FRAME.
[MORE]
FINISH. HOOD
ALL FASTENERS
AND
HARDWARE
STAINLESS
STEEL
MH150/U/MED
[MORE] CLEAR[LAMPCAT]
FLAT GLASS
LENS. SPECULAR ALUMINUM REFLECTOR SYSTEM.
[LAMP]
ONE
150W ED17 MED BASE
CLEAR MH
LAMP AT 6000
[LAMP] 70 WATT
MH, T6
LAMP.BASE-DOWN
POSITION.
RATED
LUMENS=12500
[MORE] INITIAL[MORE]
LUMENS.
SUMMARY DATA
SUMMARY DATA
EFFICIENCY (Total):
57.5 %
EFFICIENCY (Total):
75.4 %
EFFICIENCY (Down / Up):
57.5 % / 0.0 %
EFFICIENCY (Down
/ Up): (Street / House): 75.4 % / 0.0
% % / 21.6 %
EFFICIENCY
35.9
ROADWAY
CLASSIFICATION: 51.4 % / 24.0
TYPE
EFFICIENCY (Street
/ House):
%III, MEDIUM
CUTOFF
CLASSIFICATION:
FULL
CUTOFF
ROADWAY CLASSIFICATION:
TYPE II, MEDIUM
LUMENS/LAMP:
12500
CUTOFF CLASSIFICATION:
FULL CUTOFF
N
O
.
O
F
L
A
M
P
S
:
1
LUMENS/LAMP:
6000
CIRCULAR
NO. OF LAMPS:LUMINOUS OPENING:
1
Diameter:
1.58 (Feet)
LUMINOUS OPENING:
RECTANGULAR
INPUT WATTS:
185
Width:
1.08 (Feet)
Length:
1.08
Height:
0.92
INPUT WATTS:
94
• Diameter: 19” / 480mm
• Height: 39” / 990mm
• Weight: 38 lbs / 17 kg
• EPA: 1.53
• IP: 66
PRMS H3 150MH
WATTAGE: 185
LUMEN OUTPUT: 7191
EFFICACY: 67.6
ISO-ILLUMINANCE DIAGRAM (fc)
B2 U0 G2
0.01
FORWARD LIGHT
LUMEN
4.6% FL30 o
577
o
16.2%2026
FM60
FH80 o 14.8%
1850
0.2%30
FVH90 o
BACK LIGHT
BL30 o
BM60 o
BH80 o
BVH90 o
3.9%
11.7%
5.9% 0.1%
1469
738
11
UPLIGHT
UL100 o
UH180 o
0% 0%
0
0
ISO-ILLUMINANCE DIAGRAM (fc)
0.02
0.1
0.2
0.05
0.5
1. 2.
0.01
491 0.02
0.05
0.10.2
0.5
1.
Mounting
Height
----------10
15
Mounting
20
Height
25
----------30
10
35
15
40
20
45
25
50
30
35
40
45
50
Multiplier
-------------4.000
1.778
1.000
Multiplier
0.640
-------------0.444
4.000
0.327
1.778
0.250
1.000
0.198
0.640
0.160
0.444
0.327
0.250
0.198
0.160
UPLIGHT 0%
+ = Point of max candela
DOWNLIGHT 100%
20'
MOUNTING
Mounting
Height =HEIGHT
20 Feet. Each box represents one mounting height.
IES files can be found at www.aal.net
+ = Point of max candela
Mounting Height = 20 Feet. Each box represents one mounting height.
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 2.15
| 2 |