www.weg.net
Controls
Pushbuttons and Pilot Lights - CSW Series (22mm)
Standards
Rated insulation voltage
Degree of protection
Degree of protection - Terminals
UL ratings
Electrical ratings
Conventional thermal current
Utilization category AC-15
Utilization category DC-13
IEC/EN 60947-5-1, VDE 0660, NFC63140, UL 508, UL 50, CENELEC EN50007
660 Vac / Vdc
IP66 (IEC/EN 60529)
IP2X (IEC/EN 60529)
Type 1, 2, 3, 3R, 35, 4, 4X, 5,12, 12K e 13
Ith = 10A (IEC 947-5-1)
(V)
(A)
24
48
60
110
230
400
500
600
10
10
10
6
3
2
1,5
1,2
(V)
24
(A)
2,5
pushbuttons
48
1,4
60
1
110
0,55
230
0,27
400
0,2
600
0,1
UL / CSA ratings
AC / Heavy Duty (A600)
DC / Standard Duty (Q600)
Contacts resistance
≤ 25mΩ (IEC/EN 60255)
Short circuit protection
16A gL/gG fuse or MPW25-10
Electrical shock protection
Class II
Rated impulse voltage
2,5 kV (IEC 947-5-1)
Terminal capacity
1 or 2 x (0.5 - 2.5mm2) / 1 or 2 x 14-20AWG
Temperature range
-25ºC to 70ºC
(-13ºF to 158ºF)
Shock resitance
No damage or disassembling at 100g for all devices
According to MIL 202 Bmethod 202A ≤ ½ sinusoid 11ms
Vibration resistance
16g with frequency range from 40 to 500Hz
IEC/EN 6068-2-6
and max shifting 0,75mm (peak-to-peak)
Mechanical endurance
3 x 106
Pushbuttons
Selector Switches
1 x 106
Emergency-Stop
3 x 105
Maximum number of contacts
AF3 Flange
AF5 Flange
Pushbuttons (BF)
Max. 6
Max 10
BIDL Block Ratings
Rated operational voltage
Rated current
Rated impulse voltage
Temperature range
Life
Luminosity
Data is subject to change without notice.
APG2011 B.indd 237
0,85 ~1,10 x V
20 mA
2,5 kV (IEC 947-5-1)
- 25 to 70°C (-73ºF to 158ºF)
100.000 h
Red: 70 mcd
Yellow: 115 mcd
White: 275 mcd
Blue: 64 mcd
Green: 150 mcd
WEG Automation - Products and Solutions
B-237
7/27/11 11:45 AM
www.weg.net
Controls
Pushbuttons and Pilot Lights - CSW Series (22mm)
Dimensions (mm)
.
.
.
.
.
.
BEG / BC / BCI
BF
BEY
.
.
.
.
.
.
.
BFI
BSI
BD
Pilot Lights
LED and Lamp Blocks
Drilling
.
.
.
SD
BIDL / BID / BIRD
Selector Switches
.
.
.
.
.
.
CKI
CY
CK
CA
Contact Blocks
.
.
pushbuttons
BC 10/01
BC 11/20
BCA10 BCR01
Push On / Push Off Block
Accessories
.
.
.
.
.
.
.
.
.
APE
BR
B-238
APG2011 B.indd 238
1-800-ASK-4WEG
APP
APEG
Data is subject to change without notice.
7/27/11 11:46 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30 Series (30mm)
The WEG 30mm pushbuttons, selector switches, and indicators have
been designed to offer the ruggedness required for severe industrial
applications and environments. These modular devices offer superior
quality at an affordable price.
Our hazardous duty series CSW30H also offers a wide selection of operators and pilot devices for hazardous duty applications (Class 1, Division
2 and Zone 2). This series offers a wide selection of hermetically sealed
reed and factory sealed contact blocks for superior corrosion resistance.
•
•
•
•
•
•
NEMA 4, IP65 Rated;
Fits 1-13/64 (30.5mm) hole without notch required ;
Contact blocks snap-in (fast & easy assembly);
Up to 8 contact blocks for non-illuminated operators and
up to 4 contact blocks for illuminated operators
LED lamps with built-in leakage protection;
Same simple part numbering system as 22mm series.
Industrial Duty - CSW30 Series
Hazardous Duty - CSW30H Series
Specially engineered for Class 1, Division 2 and Zone 2
pushbuttons
UL listed and rated 4 / 4X for watertight and corrision resistance
Certifications
Data is subject to change without notice.
APG2011 B.indd 239
WEG Automation - Products and Solutions
B-239
7/27/11 11:46 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30 Series (30mm)
Technical Data
ELECTRICAL RATINGS - 30MM INDUSTRIAL PILOT DEVICES
Lamp
Industry
Number
Rated Volts
BIDL6
**
6V
BIDL12
**
12V
BIDL24
**
24V
BIDL130
**
120/130V
Lumens (MSCD)
Design Life
(Hrs.)
Current Draw
(mA)
Lamp
Type
Shock &
Vibration
Leakage
Protection
100,000
50
LED
Excellent
14 mA
100,000
<20
LED
Excellent
4 mA
100,000
<20
LED
Excellent
4 mA
100,000
<10
LED
Excellent
2 mA
IEC
UL
Make Rating
Break
Rating
Ith-Thermal
Current
AC-15
A600
7200VA
720VA
10A
Varies w/ Color
Varies w/ Color
2000 mcd
Typical
*Specify lamp color when ordering.
Dielectric Strength (Terminal to Ground) 2200V for 1 Minute
Standard Contacts
Utilization
Category
AC
DC
DC-13
P300
138VA
138VA 5A
Note: For AC voltage below 72V AC the max. allowed switching current is 10A = Ith. For DC voltages below 28V DC the max. allowed switching current is 5A =Ith.
For switching applications below 24V/40mA - Hermetic REED contacts are recommended. Hermetic Reeds are also excellent in environments containing
chemical vapors, oxidizing agents, and explosive gases. Please refer to the HAZARDOUS section of the 30mm devices for more information.
Environmental Ratings
TYPE 1, 2, 3, 3R, 4/4X, 12, 13, and IP65
Operating Temperature
-40 to +131° F ( -40 to +55° C )
Storage Temperature
-40 to +185° F ( -40 to +85° C )
Operating environments below freezing
temperatures are assumed to be absent of
freezing liquids or pollutants.
pushbuttons
Terminal & Wiring Consideration
Wire- AWG 22-12 CU
(Copper Only – Solid & Stranded) [.5 ~ 4 mm2 ]
One or Two wires permitted per termination
Recommended Tightening Torque
7 lb-in (+3.0/-0.0 lb-in) — [ .8 Nm ]
Mechanical Design Life Cycles
Push Buttons
Momentary
5,000,000
Maintained
250,000
Selector Switches
500,000
All Other Devices
250,000
Standard Contact Blocks
10,000,000
Indicating Lights – Refer to the appropriate Lamp Data
B-246
APG2011 B.indd 246
1-800-ASK-4WEG
Materials
Thermoplastic Polyester and Polyester
Blends (UV Stabilized for outdoor use)
Operator Housings
Operator Caps and Handles - Non-Illuminated (Glass Reinforced
Grades)
Mounting Rings and Nuts
Thrust Washer
Trim Washer
High Impact Polycarbonate
(UV Stabilized for outdoor use)
Pilot Light Lens
Transparent PB and Mushroom Caps
Custom Polymers
Certain CAM and Bearing parts are
Teflon, Silicone, & Moly-Disulfide
Impregnated for improved wearability
Fluorosilicone and Thermoplastic Neoprene Boot Accessories
Seals
Neoprene Gaskets
Thermoplastic – Molded Neoprene
and alloy derivitives
BUNA N – Rubber – Teflon Coated
Thermoplastic – Elastomer Molded Seals
Fluorosilicone – Boots
Metal: Brass & Stainless Steel
Push Pull Bushings
Internal tubes for Maintained Devices
Detents for Maintained Devices
Springs (Stainless Steel throughout)
Aluminum
Optional Mounting Nut
Operating Forces
Pushbuttons (Operator Only)
Momentary
1.3 lbs. [5.8 N]
Illuminated Momentary 2.8 lbs. [12.4 N]
Maintained
4 to 6 lbs. [17.9~26.7 N]
Illuminated Maintained 4.6 lbs. [20.5 N]
Reset Push Button
1.5 lbs. [6.7 N]
Selector Switches
Maintained
1.7 in-lbs [.19 Nm]
Momentary
1.7 in-lbs [.19 Nm]
Key Operated
1.7 in-lbs [.19 Nm]
Cable Pull
Standard
4 to 6 lbs. [17.9~26.7 N]
Heavy Duty
13 lbs. [57.8 N]
Push-Twist Release
4.7 lbs. [20.9 N]
Potentiometer
2 Watt ”J” Series
3-12 in-oz.
[.11 Nm Max.]
( 300° Rotation )
Standard Contact Blocks
1 lb. [4.45 N]
Indicating LightsRefer to the appropriate
Lamp Data
Multi-Voltage Light
20-240 VAC/VDC
(Burden .65W max.)
Transformer
2 VA
Data is subject to change without notice.
7/27/11 11:47 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30 Series
Momentary & Maintained Non-Illuminated Push Buttons
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Non-Illuminated Operator
(shown with Flush Cap)
7/16"
7/8"
(11.1mm)
(22.5mm)
Add'l
blocks
1-1/2"
(38.1mm)
7/16"
(11.1mm)
Momentary Guarded Flush Cap
1-9/16"
(39.7mm)
1-9/16"
(39.7mm)
11/16”
(17.5mm)
1-9/16”
(39.7mm)
1-11/16"
(42.9mm)
1-11/16”
(42.9mm)
1-11/16"
(42.9mm)
Panel Thk. shown
3/16" (4.8mm)
Panel Thk. shown
3/16" (4.8mm)
Cap
Momentary Guarded
Extended Cap
Momentary Extended Cap
9/16"
(14.3mm)
1-9/16"
(39.7mm)
11/16”
(17.5mm)
1-9/16”
(39.7mm)
1-11/16"
(42.9mm)
Momentary Standard
Rubber Boot
Momentary 1-1/2” (38mm)
Mushroom Cap
1-3/16"
(20.6mm)
1-1/2"
(38.1mm)
1-9/16"
(39.7mm)
1-5/8"
(41.3mm)
Momentary 2-1/4” (57.2mm)
Jumbo Mushroom Cap
1-3/8"
(34.9mm)
1-9/16"
(39.7mm)
1-3/8"
(34.9mm)
1-11/16"
(42.9mm)
1-9/16"
(39.7mm)
Momentary 1-1/2” (38mm)
Shrouded Mushroom Cap
Momentary Fluorosilicone
Rubber Boot
13/16"
(20.6mm)
1-11/16”
(42.9mm)
1-9/16"
(39.7mm)
ø1-7/8”
(ø45.2mm)
1-9/16"
(39.7mm)
1-5/8"
(41.3mm)
2-1/4"
(57.2mm)
Momentary 2-1/4” (57.2mm)
Shrouded Jumbo Mushroom Cap
1-7/16”
(36.5mm)
1-7/16"
(36.5mm)
1-11/16"
(42.9mm)
1-9/16"
(39.7mm)
2-5/8"
(66.7mm)
1-5/8"
(41.3mm)
pushbuttons
7/16"
(11.1mm)
7/8"
(22.5mm)Momentary Flush
Add'l
7/16"
blocks
1-1/2"
(11.1mm)
(38.1mm)
1-3/16”
(30.2mm)
1-9/16"
(39.7mm)
2-Position Push-Pull
Maintained 1-1/2” (38mm)
Mushroom Cap
1-7/16"
(36.5mm)
Out Dim.
1-9/16"
(39.7mm)
2-Position Push-Pull Maintained 2-1/4”
(57.2mm) Jumbo Mushroom Cap
1-3/16"
(30.2mm)
In Dim.
Data is subject to change without notice.
APG2011 B.indd 247
1-9/16"
(39.7mm)
1-7/16”
(36.5mm)
1-5/8"
(41.3mm)
1-5/8"
(41.3mm)
1-3/16"
(30.2mm)
In Dim.
2-Position Push-Twist Maintained
1-1/2” (38mm) Mushroom Cap
1-9/16”
(39.7mm)
1-5/8”
(41.3mm)
1-7/16"
(36.5mm)
In Dim.
WEG Automation - Products and Solutions
B-247
7/27/11 11:47 AM
)
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30 Series
Momentary Illuminated Push Buttons
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Illuminated Full Voltage Operators
Illuminated Full Voltage, Transformer, Resistor
and Dual-Input Operators
2-3/16"
2-3/16"
(55.6mm)
(55.6mm)
1-5/8"
1-5/8"
(41.3mm)
(41.3mm)
1-1/2"
1-1/2"
(38.1mm)
(38.1mm)
7/8"
7/8"
(22.5mm)
(22.5mm)
Add'l
Add'l
blocks
blocks
1-1/4"1-1/4"
(31.8mm)
(31.8mm)
1-3/4"
1-3/4"
(44.5mm)
(44.5mm)
7/8" 7/8"
(22.5mm)
(22.5mm)
Add'l Add'l
blocksblocks
1-9/16"
1-9/16"
(39.7mm)
(39.7mm)
1-5/8"
1-5/8"
(41.3mm)
(41.3mm)
1-5/8"1-5/8"
(41.3mm)
(41.3mm)
PanelPanel
Thk. shown
Thk. shown
3/16" 3/16"
(4.8mm)
(4.8mm)
Panel Thk. shown
Panel
Thk. shown
3/16"
(4.8mm)
3/16" (4.8mm)
Illuminated Guarded Lens
Illuminated Shrouded
Mushroom Lens
1-7/16”
(36.5mm)
1-3/4"1-3/4"
(44.5mm)
(44.5mm)
1-5/8"1-5/8"
(41.3mm)
(41.3mm)
1-11/16”
(42.9mm)
1-3/4”
(44.5mm)
1-1/2”
(39.7mm)
1-15/16”
(49.2mm)
1-1/2”
(39.1mm)
1-5/8”
(41.3mm)
TABLE 1- MOUNTING GASKETS
PANEL THICKNESS
1/16"
1/8"
3/16"
1/4"
1-5/8”
(41.3mm)
1-9/16”
(39.7mm)
GASKETS*
4
3
2
1
* REMOVE ONE ADDITIONAL GASKET
WHEN USING A LEGEND PLATE
Panel Thk. shown
3/16” (4.8mm)
NOTES:
2 & 3 Position Push-Pull Maintained Illuminated Push Buttons
1) MOUNTING HOLE IN PANEL - ÿ1-3/16 (30MM)
3) MOUNTING HOLE SPACING (FOR STANDARD LEGEND PLATES) - HORIZON
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
2) CHOICE OF ALUMINUM OR PLASTIC CLAMP RING (NEMA 4 OR NEMA 4X).
Illuminated Transformer and Resistor Operators
Illuminated Full Voltage Operator
TOLERANCE:
.XX +/- 0.02
.XXX +/- 0.005
.XXXX +/- 0.001
ANGLES +/- 0.5 DEG
2-1/16"
(52.4mm)
1-7/16"
(36.5mm)
1-7/16"
(36.5mm)
7/8"
(22.5mm)
Add'l
blocks
1-9/16"
(39.7mm)
7/8"
(22.5mm)
Add'l
blocks
1-7/16"
(36.5mm)
3-1/16" (77.8mm)
pushbuttons
7/8"
(22.5mm)
Add'l
block
Panel Thk.
(3/16" (4.8mm) shown)
2-1/8"
(54mm)
Date:
Scale:
1-5/8"
(41.3mm)
1-5/8"
(41.3mm)
Alternate Action Block
11/16”
(17.5mm)
2-3/16”
(55.6mm)
1-11/16”
(42.9mm)
1/2"
(12.7mm)
Travel
B-248
APG2011 B.indd 248
1-800-ASK-4WEG
www.c3controls.com
30P30137-O
Drawing Number:
RCG
06-15-2000
2-1/8"
(54mm)
Fully-assembled operators come standard with one 3/16” (4.8mm)
and three 1/16” (1.6mm) gaskets.
1-3/8"
(34.9mm)
Drawn By:
Panel Thk.
(3/16" (4.8mm) shown)
Reset Push Button
7/16"
(11.1mm)
BEAVER, PA 15009
This drawing is the property of c3controls. The drawing may
Panel Thk.
(3/16" (4.8mm) shown)
2-1/16"
(52.4mm)
1-5/8"
(41.3mm)
2-1/8"
(54mm)
7/8"
(22.5mm)
Add'l
block
2-1/8"
(54mm)
P.O. BOX 496
Description:
30mm Full-Voltage Illuminated Push Button with Guarded Le
2-1/16"
(52.4mm)
1-5/8"
(41.3mm)
Panel Thk.
(3/16" (4.8mm) shown)
2-1/16"
(52.4mm)
UNLESS OTHERWISE
SPECIFIED
3-1/16" (77.8mm)
Data is subject to change without notice.
7/27/11 11:47 AM
1:1
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30 Series
Wobble stick
Fully-assembled operators come standard with one 3/16” (4.8mm)
and three 1/16” (1.6mm) gaskets.
1-1/2”
(39.7mm)
3-3/16”
(80.96mm)
MULTIPLE
GASKETS
1-9/16”
(39.7mm)
1-5/8”
(41.3mm)
7/8”
(22.2mm)
ADD PER
CONTACT
1-5/8”
(41.3mm)
ø1-3/16”
(ø80.96mm)
MOUNTING HOLE
1/4”
(6.3mm)
Potentiometer with & without Terminal Block
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Potentiometer Operator
(shown without Terminal Block)
Potentiometer Operator
(shown with Terminal Block)
21”
(25.4mm)
1-5/8"
(41.3mm)
1"
(25.4mm)
1-3/4"
(44.5mm)
2-1/8”
(54mm)
1
1-5/8”
(41.3mm)
1-9/16"
(39.7mm)
1-9/16”
(39.7mm)
1-3/8"
(34.9mm)
1-9/16"
(39.7mm)
B
Panel Thk. shown
3/16" (4.8mm)
B
1 2 3
Panel Thk. shown
3/16” (4.8mm)
1-5/16"
(33.3mm)
Contact Blocks
2
C ontact B lock
( shown with IP20 T erminal G uard )
C ontact B lock
11/16"
(17.5mm)
7/8"
(22.5mm)
15/16"
(24.5 mm)
5/16"
(7.9mm)
0
2 IS THE COMMON
1 ‘ 2 IS DECREASING
RESISTANCE (” &)
3 ’ 2 IS INCREASING
RESISTANCE (‘ Ω)
1-5/8"
(41.1 mm)
5/16"
(7.9mm)
pushbuttons
1-11/16"
(42.9mm)
3
&
LOCATION FOR
M6 TERMINAL
CLOCKWISE
BLOCK MARKER
KNOB ROTATION
AS SEEN FROM
THE FRONT OF
THE PANEL
7/8"
(21.6 mm)
7/8"
(22.5mm)
1-3/8"
(34.9mm)
1
1
A
A
Cable Pull Operators
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
P.O. BOX 496
BEAVER, PA 15009
www.c3controls.com
Description:
Push-Pull Maintained Cable Pull Operator
2-3/8"
(60.3mm)
1/2"
(12.7mm)
2
7/8"
(22.5mm)
Add'l
block
Date:
B. Johnson
1/4/2008
1 Scale: 1:1
Drawing Number:
30P10046-OD
Momentary
Booted Cable Pull
Operator
Panel Thk. shown
3/16" (4.8mm)
Data is subject to change without notice.
APG2011 B.indd 249
c3
Contact Block and IP-20 Gaurd Ouline Drawing
Drawn By:
1-9/16"
(39.7mm)
1-5/8"
(41.3mm)
1/4"
(6.4mm)
Throw
Momentary and
Heavy Duty Cable
Pull Operators
This drawing is the property of controls. The drawing may
not be copied, used or
c3 disclosed, for any purpose
30mm
except as authorized in writing
by controls.
WEG Automation - Products and Solutions
B-249
7/27/11 11:48 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30 Series
maintained flush & extended push button caps
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Maintained Flush Push Button Cap
(shown with an operator and
contact block)
1-1/2"
(38.1mm)
1-3/8"
(34.9mm)
Maintained Extended Push
Button Cap
7/8"
(22.5mm)
Add'l
block
1-3/8"
(34.9mm)
1-9/16"
(39.7mm)
1-1/2"
(38.1mm)
1-3/8"
(34.9mm)
1-5/8"
(41.3mm)
Panel Thk. shown
3/16" (4.8mm)
Pilot Lights
Fully-assembled operators come standard with one 3/16” (4.8mm) and two 1/16” (1.6mm) gaskets.
Full Voltage Pilot Light Operator
Transformer & Resistor Pilot Light Operators
1-7/8”
(47.3mm)
1-7/64”
(28.2mm)
11/16”
(17.7mm)
1-3/4”
(44.4mm)
1-1/16”
(27.1mm)
1-13/16”
(46mm)
2-11/64”
(55.1mm)
25/128”
(5mm)
Dual Input
Pilot Light Operator
1-1/16"
(27mm)
2-3/16"
(55.6mm)
1-5/8" (41.3mm)
1-5/8”
(41.2mm)
1”
(25.4mm)
3/16”
(4.7mm)
Multi-Voltage Pilot Light
DRILLING
Fully-assembled operators come standard with four 1/16” (1.6mm) gaskets.
CSW30 Panel Cutout
IP20 Terminal
Guard
7/8"
(22.5mm)
Add'l
blocks
1-5/8"
(41.3mm)
1-3/4"
(44.5mm)
Panel Thk. shown
3/16" (4.8mm)
pushbuttons
Multi-Voltage Pilot Light
1-1/64”
(25.8mm)
1-5/8”
(41.2mm)
2-1/128”
(51mm)
25/128”
(5mm)
1-5/8”
(41.2mm)
1-1/128”
(25.5mm)
B-250
APG2011 B.indd 250
3/16”
(4.7mm)
1-800-ASK-4WEG
IP20 Terminal
Guard
Data is subject to change without notice.
7/27/11 11:48 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30 Series
2-1/2"
(63.5mm)
1-1/4"
(31.8mm)
Push-To-Test Pilot Lights
2-1/2"
(63.5mm)
1-1/4"
(31.8mm)
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Panel Thk.
(3/16" (4.8mm) shown)
Full Voltage, Transformer & Resistor
Push-To-Test Operators
Full Voltage, Transformer & Resistor
Push-To-Test Operators
2-1/2"
(163.5mm)
1-1/2"
(38.1mm)
1-3/4"
(44.5mm)
Panel Thk.
1-3/4"
(3/16" (4.8mm) shown)
(44.5mm)
2-1/2"
(63.5mm)
1-1/4"
(31.8mm)
1-5/8"
(41.3mm)
1-5/8"
(41.3mm)
1-3/4"
(44.5mm)
Panel Thk.
(3/16" (4.8mm) shown)
Panel Thk.
1-5/8"
(3/16"(41.3mm)
(4.8mm) shown)
S hrouded M ushrooms L ens
G uarded L ens
1-1/2”
(39.7mm)
1-11/16”
(42.9mm)
1-7/16”
(36.5mm)
1-9/16”
(39.7mm)
1-3/4”
(44.45mm)
ø1-15/16”
(ø49.2mm)
1-3/4"
(44.5mm)
1-5/8”
(41.3mm)
1-5/8"
(41.3mm)
Selector switches
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Selector Switch Operator
(shown with standard handle)
1-1/8"
(28.6mm)
1-7/16"
(36.5mm)
7/8"
(22.5mm)
Add'l
block
Selector Switch Lever Handle
31/32"
(787.4mm)
2-7/32"
(56.2mm)
1-1/8"
(28.6mm)
1-5/8"
(41.3mm)
1-17/32"
(38.9mm)
1-39/64"
(40.8mm)
7/8"
(22.5mm) 1-39/64"
Add'l
(40.8mm)
contacts
1-5/8"
(41.3mm)
1-3/8"
(34.9mm)
1" (25.4mm) Swing Radius
Panel Thk. shown
1/4" (6.4mm)
1-3/8"
(34.7mm)
Panel Thk. shown
3/16" (4.8mm)
5-7/64"
(129.8mm)
2-11/16"
(68.1mm)
2-11/16"
(68.1mm)
2”
(50.9mm)
1-15/32”
(37.5mm)
CAVITY
HEIGHT
1-55/64"
(47mm)
ø1-7/32”
(ø30.7mm)
Data is subject to change without notice.
APG2011 B.indd 251
pushbuttons
lock-off attachment
1-21/32”
(42mm)
37/64”
(14.7mm)
3/16”
(4.7mm)
WEG Automation - Products and Solutions
B-251
7/27/11 11:48 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty
Hazardous Duty General Standards
WEG Hazardous duty Pilots Devices
are specially engineered for Class 1,
Division 2 and Zone 2.
Wide selection of hermetically sealed
reed and factory sealed contact
block.
An all-polyester construction with
nickel-plated or stainles steel metal
parts for superior corrision
resistance.
Logic Reeds provide great operation
for low power level ( resistive loads
only ) , especially PLC inputs.
Added Security - Optional Features
Rubber Boots add an additional layer of protection from corrisive chemicals left
behind from hands on operations or
washdown environments.
Logic Reeds are hermetically sealed,
Providing needed dependability for
harsh environments.
Added Security - Standard Features
All Hazardous duty Push Buttons comes standard with
a screw tightening mounting bracket to ensure the contact
blocks remain tight to the operator
pushbuttons
Certifications
B-252
APG2011 B.indd 252
1-800-ASK-4WEG
Data is subject to change without notice.
7/27/11 11:48 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty
Technical Data
FACTORY SEALED: Contact Blocks are Certified as ”Explosion Proof”. Devices employing this method of protection are designed so that all electrical parts are enclosed in
a switch housing that is capable of withstanding, without damage, an explosion of a specified gas or vapor/air mixture which may occur during the operation of the switch.
Further, the explosion internal to the switch body is controlled so that the hot gases are extinguished and cooled before they are
allowed to escape to the surrounding atmosphere. HERMETICALLY SEALED: Contact Blocks are Certified as “Non-Incendive”. Devices employing this method of protection are designed so that all electrical parts
are a bonded part of the switch housing that forms an arcing chamber that is evacuated of all oxygen, filled with an inert gas, and then sealed to prohibit the exchange of
gases with the surrounding environment. These devices are incapable of igniting the surrounding gases or vapor/air mixtures under normal
operation. Devices of this type are suitable for use in Div. 2/ Zone 2 applications. Hermetically Sealed contact blocks are also extremely useful for switching
low energy circuits or circuits applied in atmospheres containing oxidizing agents and pollutants that might effect the performance of silver switching and metal contact elements. Hermetically Sealed Switch performance is consistent and repeatable in almost any environment.
Dielectric Strength (Mechanical Contacts) 2200V for 1 Minute
Factory Sealed Contact Block
Class I Div. 2 Gr. B,C, & D / Zone 2 Gr. IIB +H2
Utilization Category
Make
Break Ith-Thermal
IECUL
RatingRatingCurrent
A600
7200VA 720VA
10A
ACAC-15
DCDC-13
Q300
69VA
69VA
2.5A
Hermetically Sealed Mid-Power Reed Contact Block
Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC
Utilization Category
Make
Break Ith-Thermal
IECUL
RatingRating Current
ACAC-15
C300
1800VA 180VA
2.5A
DCDC-13
Q150
69VA
69VA
2.5A
NOTE: For AC voltage below 72V AC the max. allowed switching current is 10A = Ith.
For DC voltages below 28V DC the max. allowed switching current is 2.5A = Ith.
For switching applications below 24V/40mA, Hermetic REED contacts are recommended.
NOTE: For AC voltage below 72VAC the max. allowed switching current is 2.5A = Ith.
For DC voltages below 28VDC the max. allowed switching current is 2.5A = Ith.
Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
Hermetically Sealed Power Reed Contact Block
Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC
Utilization Category
Make
Break Ith-Thermal
IECUL
RatingRatingCurrent
B300
3600VA 360VA
5A
ACAC-15
AC-15 C600
1800VA 180V 2.5A
Q300
69VA
69VA
2.5A
DCDC-13
NOTE: For AC voltage below 72V AC the max. allowed switching current is 5A = Ith.
For DC voltages below 28V DC the max. allowed switching current is 2.5A = Ith.
Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
Hermetically Sealed mid-logic reed Contact Block
Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC
Utilization Category
Resistive Ith-Thermal
IECUL
Inductive
Current
AC AC-12
250V Max.
40VA
100 Watt
3A
Hermetically Sealed logic reed Contact Block
Class I Div. 2 Gr. A, B, C, & D/Zone 2 Gr. IIC
Utilization Category
IECUL
Inductive
Resistive Ith-Thermal
Current
AC
220V Max.
N/A
40 Watt
2A
Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
Indicating Lights
Light Unit
FV Incandescent Lights
FV LED Lights
Resistor Lights
Light Unit
Resistor LED Lights
Transformer Lights Incd. & LED
Multi-Voltage 20V-240V LED Light
T-Code
T4A
T6 [No marking required]
T3C
T-Code
T6
T4A
T4A
Suitable for switching DRY Circuits and Low Energy Circuits (Less than 24V-40mA).
Materials
pushbuttons
Thermoplastic Polyester and Polyester Blends (UV
Stabilized for outdoor use)
Operator Housings
Operator Caps and Handles –
Non-Illuminated (Glass Reinforced Grades)
Mounting Rings and Nuts
Thrust Washer
Trim Washer
High Impact Polycarbonate (UV Stabilized for
outdoor use)
Pilot Light Lens
Transparent PB and Mushroom Caps
Custom Polymers
Certain CAM and Bearing parts are Teflon,
Silicone, & Moly-Disulfide Impregnated for
improved wearability
Fluorosilicone and Thermoplastic
Neoprene Boot Accessories
B-256
APG2011 B.indd 256
1-800-ASK-4WEG
Seals
Neoprene Gaskets
Thermoplastic – Molded Neoprene and alloy
derivitives
BUNA N – Rubber – Teflon Coated
Thermoplastic – Elastomer Molded Seals
Fluorosilicone – Boots
Metal: Stainless Steel
Push Pull Bushings
Internal tubes for Maintained Devices
Detents for Maintained Devices
Stainless Steel Springs and Screws throughout
Aluminum
Optional Mounting Nut
Environmental Ratings
Type 1, 2, 3, 3R, 4/4X, 12, 13, and IP65
Operating Temperature
-40 to +131° F ( -40 to +55° C )
Storage Temperature
-40 to +185° F ( -40 to +85° C )
Operating environments below freezing
temperatures are assumed to be absent of
freezing liquids or pollutants.
Terminal & Wiring Consideration
Wire- AWG 22-12 CU
(Copper Only – Solid & Stranded) [.5 ~ 4 mm2 ]
One or Two wires permitted per termination
Recommended Tightening Torque
7 lb-in (+3.0/-0.0 lb-in) — [ .8 Nm ]
Data is subject to change without notice.
7/27/11 11:50 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty
Momentary Non-Illuminated H-Line Push Buttons
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Non-Illuminated Operator
(shown with Flush Cap & Factory Sealed Contact Block)
1-3/8"
(34.9mm)
2-3/16"
(55.6mm)7/16"
9/16"
(11.1mm)
(14.3mm)
Mtg. bracket
2-3/16"
(55.6mm)
9/16"
(14.3mm)
Mtg. bracket7/16"
(11mm)
1-3/8"
(34.9mm)
1-3/8"
(34.9mm)
Panel Thk.
(3/16" (4.8mm) shown)
1-9/16"
(39.7mm)
7/16"
(11mm)
2-1/8"
(54mm)
1-3/8"
1-5/8"
(34.9mm)
(41.3mm)
Panel Thk.
(3/16" (4.8mm) shown)
M omentary 1-1/2” (38 mm )
M ushroom C ap
1-3/8"
(34.9mm)
2"
(50.8mm)
1-9/16"
(39.7mm)
1-9/16"
(39.7mm)
2"
(50.8mm)
1-5/8"
(41.3mm)
M omentary 2-1/4” (57.2 mm ) J umbo
M ushroom C ap
1-3/8"
(34.9mm)
M omentary G uarded F lush C ap
11/16”
(17.5mm)
1-3/16"
(30.2mm)
2" (50.8mm)
1-9/16"
(39.7mm)
Operator Hsg.
1-9/16”
(39.7mm)
1-11/16”
(42.9mm)
9/16"
(14.3mm)
Momentary 1-1/2” (38mm) Shrouded
Mushroom Cap
2-1/8"
(54mm)
Illum PB
1-7/16"
ø1- 7/8"
(ø45.2mm) (36.5mm)
2-1/4"
(57.2mm)
Momentary Fluorosilicone Rubber
Boot
1-1/2"
(38.1mm)
11/16”
(17.5mm)
1-9/16”
(39.7mm)
2-7/16"
(61.9mm)
Mtg. bracket
2-7/16"
(61.9mm)
Mtg. bracket
1-3/16"
(30.2mm)
1- 3/16"
(30.2mm)
9/16"
(14.3mm)
2-1/8"
(54mm)
1-9/16”
(39.7mm)
Operator Hsg.
Momentary 2-1/4” (57.2mm) Shrouded Jumbo
Mushroom Cap
1-3/16"
(30.2mm)
9/16"
(14.3mm)
1-3/16"
(30.2mm)
2-7/16” (61.9mm)
Mounting Bracket
Sel Switch
3-1/8"
(79.4mm)
2-1/4"
(57.2mm)
2-1/8"
2-1/8"
(54mm)
2-1/8"
(54mm)
1-5/8"
(41.3mm)
Operator Hsg.
2” (50.8mm)
2-1/8”
(54mm)
1-5/8”
(41.3mm)
Operator Hsg.
N on -I lluminated2-7/16"
P ush B utton
(61.9mm)
M ounting B racket
2" (50.8mm)
1-9/16"
(39.7mm)
Operator Hsg.
13/16"
(20.6mm)
M omentary G uarded
E xtended C ap
1-11/16”
(42.9mm)
2-1/8"
(54mm)
1-5/8"
(41.3mm)
Operator
Hsg.
2-1/4"
(57.2mm)
2-7/16"
(61.9mm)
Mtg. bracket
2-7/16"
(61.9mm)
Mtg. bracket
2-1/8"
(54mm)
1-9/16"
(39.7mm)
1-5/8"
(41.3mm)
Operator
Hsg.
2-1/8"
(54mm)
3/8"
(9.5mm)
2-1/8"
(54mm)
1-5/8"
(41.3mm)
2-7/16"
(61.9mm)
Mtg. bracket
2" (50.8mm)
1-9/16"
(39.7mm)
Operator Hsg.
9/16"
(14.3mm)
pushbuttons
7/16"
(11.1mm)
Momentary Extended Cap
(54mm)
Non Illum Push Button
2-3/8"
(60.3mm)
13/16"
Panel
Thk.
2 3/16"
(3/16" (4.8mm) shown)
2-7/16"
(61.9mm)
Mtg. Bracket
9/16"
Mtg.
bracket
1 1/2"
Data is subject to change without notice.
APG2011 B.indd 257
WEG Automation - Products and Solutions
Panel Thk.
(3/16" shown)
B-257
7/27/11 11:50 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty
maintained non-Illuminated H-Line Push Buttons
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
2-Position Push-Pull Maintained
1-1/2” (38mm) Mushroom Cap
2-Position Push-Pull Maintained Operator
(shown with 2-1/4” (57.2mm) Jumbo Mushroom Cap)
1-7/16"
(36.5mm)
Out Dim.
2-1/8"
(54mm)
1-3/16"
(30.2mm)
In Dim.
2-1/8"
(54mm)
1-5/8"
(41.3mm)
Operator
Hsg.
2-1/4"
1 7/16"(57.2mm)
Out Dim.
1-5/8"
(41.3mm)
Oper. Hsg.
2-7/16"
(61.9mm)
Mtg. bracket
3 1/16"
1 3/16"
(30.2mm)
In Dim.
2-7/16" (61.9mm)
Mounting Bracket
momentary Illuminated H-Line Push Buttons
2-3/16"
(55.6mm)
9/16"
(14.3mm)
Mtg. Bracket
1-7/16"
(36.5mm)
Out Dim.
2" (50.8mm)
1-9/16"
(39.7mm)
Oper. Hsg.
1-5/8"
(41.3mm)
1 3/16"
In Dim.
Panel Thk.
(3/16"1(4.8mm)
shown)
5/8"
Panel Thk.
(3/16" shown)
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Illuminated Full Voltage Operator
1-7/16"
(36.5mm)
Illuminated Transformer, Resistor
and Dual Input Operators
To end of transformer/resistor /
2-1/4"
dual-input housing
(57.2mm)
1-1/2"
1 7/16"
(38.1mm)
3-3/16"
2-1/4"
11/16"
(80.9mm)
(57.2mm)
(17.5mm)
2-1/4"
(57.2mm)
1-11/16"
(42.9mm)
2-1/8"
(54mm)
1-3/4"
(44.5mm)
1-9/16"
(39.7mm)
Panel Thk.
3/16" (4.8mm)
Panel Thk.
(3/16" (4.8mm) shown)
I lluminated P ush B utton M ounting
B racket
9/16"
(14.3mm)
1-3/16"
(30.2mm)
Illuminated Shrouded
Mushroom Lens
1-7/16”
(36.5mm)
2-1/8"
(54mm)
Illuminated Guarded Lens
ø1-15/16”
(ø49.2mm)
Illum PB
1-3/4”
(44.5mm)
1-11/16”
(42.9mm)
1-1/2”
(39.7mm)
1-5/8”
(41.3mm)
1-9/16”
(39.7mm)
2-1/4"
(57.2mm)
pushbuttons
9/16"Maintained Illuminated H-Line Push Buttons
2-Position Push-Pull
(14.3mm)
1-3/16"
Fully-assembled
operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
(30.2mm)
2-1/8"
(54mm)
Illuminated Full
Voltage Operator
Sel Switch
2-7/16"
2-1/8"
(61.9mm)
(54mm)
3-9/16"
(90.5mm)
1-5/8"
(41.3mm)
1-3/16"
(30.2mm)
1-7/16"
(36.5mm)
Illuminated Transformer and Resistor Operators
1-7/16"
(36.5mm)
2-7/16"
(61.9mm)
7/8"
(22.5mm)
1-9/16"
9/16"
(39.7mm)
(14.3mm)
2-1/8"
(54mm)
Panel Thk.
(3/16" (4.8mm) shown)
2-1/8"
(54mm)
Non Illum Push Button
2-1/4"
(57.2mm)
Panel Thk.
(3/16" (4.8mm) shown)
2-3/8"
(60.3mm)
B-258
APG2011 B.indd 258
1-800-ASK-4WEG
Data is subject to change without notice.
7/27/11 11:51 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty
H-Line Pilot Lights
Fully-assembled operators come standard with one 3/16” (4.8mm) and two 1/16” (1.6mm) gaskets.
T ransformer & R esistor P ilot L ight
O perators
F ull V oltage P ilot L ight O perator
1-1/16"
(27mm)
3/4"
(19.1mm)
1-5/8"
(41.3mm)
1-1/16"
(27mm)
1-3/4"
(44.5mm)
D ual I nput
P ilot L ight O perator
2-3/16"
(55.6mm)
1-1/16"1-3/4"
(44.5mm)
(27mm)
7/8"
(22.5mm)
Add'l
blocks
1-5/8" (41.3mm)
1-9/16"
(39.7mm)
Panel Thk.
(3/16" (4.8mm) shown)
2-3/16"
(55.6mm)
1-5/8"
(41.3mm)
Panel Thk.
(3/16" (4.8mm) shown)
1-5/8"
(41.3mm)
1-3/4"
(44.5mm)
Panel Thk.
(3/16" (4.8mm) shown)
Push-To-Test H-Line Pilot Lights
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
F ull V oltage P ush -T o -T est O perator
Transformer & Resistor Push-To-Test Operators
3-1/8"
(79.4mm)
1-3/16"
(30.2mm)
1-5/8"
(41.3mm)
3-3/16"
(81mm)
1-1/2"
(38.1mm)
2-1/4"
(57.2mm)
2-1/8"
(54mm)
1-5/8"
(41.3mm)
Operator
Hsg.
2-1/8"
(54mm)
2-7/16"
(61.9mm)
Mtg. bracket
Panel Thk.
(3/16" (4.8mm) shown)
Guarded Lens
Shrouded Mushroom Lens
1-11/16”
(42.9mm)
1-3/4”
(44.5mm)
1-7/16”
(36.5mm)
1-3/4”
(44.5mm)
ø1-15/16”
(ø49.2mm”)
Illuminated Push-To-Test Mounting
Bracket
9/16"
(14.3mm)
1-3/16"
(30.2mm)
2-1/8"
(54mm)
1-5/8”
(41.3mm)
1-5/8”
(41.3mm)
Illum PB
9/16"
(14.3mm)
Multi-Voltage H-Line Pilot Light
Fully-assembled operators come standard with four 1/16” (1.6mm) gaskets.
1-3/16"
(30.2mm)
Multi-Voltage Pilot Light
1-1/16"
(27mm)
2-1/8"
(54mm)
1-5/8"
(41.3mm)
2-1/16"
(52.4mm)
Panel Thk.
(3/16" (4.8mm) shown)
1"
(25.4mm)
9/16"
(14.3mm)
1-3/16"
(30.2mm)
2-1/8"
(54mm)
Data is subject to change without notice.
APG2011 B.indd 259
Sel Switch
2-7/16"
(61.9mm)
1-5/8"
(41.3mm)
1-9/16"
(39.7mm)
pushbuttons
2-1/4"
(57.2mm)
2-3/8"
(60.3mm)
WEG Automation - Products and Solutions
Non Illum Push Button
B-259
7/27/11 11:51 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty
h-line Selector switches
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
Selector Switch Operator
(shown with standard handle)
Selector Switch Lever Handle
2-1/8"
(54mm)
1-3/8"
(34.9mm)
2-1/4"
(57.2mm) Panel Thk.
(3/16" (4.8mm) shown)
1-1/8"
(28.6mm)
1-9/16"
(39.7mm)
Operator
Hsg.
9/16"
3-1/16"
(14.3mm)
(77.8mm)
9/16" (14.3mm)
Mtg. bracket
1-3/16" 1-1/8"
(28.6mm)
(30.2mm)
2-1/8"
Illum PB
(54mm)
1-5/8"
(41.3mm)
Operator
Hsg.
31/32"
(787.4mm)
1" (25.4mm) Swing Radius
2-7/16"
(61.9mm)
Mtg. bracket
Selector Switch Mounting Bracket
9/16"
(14.3mm)
1-3/16"
(30.2mm)
2-1/8"
(54mm)
Sel Switch
2-7/16"
(61.9mm)
9/16"
(14.3mm)
1-3/16"
(30.2mm)
H-line contact blocks
2-1/8"
Non Illum Push Button
(54mm)
Factory Sealed Contact Block
Power Reed, Mid-Power Reed & Medium Logic
Reed Contact Blocks
2-3/8"
(60.3mm)
1-11/16"
(42.9mm)
NC
contacts
NO
contacts
1-15/16"
(49.2mm)
1-1/2"
(38.1mm)
1-3/16"
(30.2mm)
1-1/8"
(28.6mm)
1"
(25.4mm)
pushbuttons
1-11/16"
(42.9mm)
2-5/16"
(58.7mm)
2-13/16"
(71.4mm)
13/16"
(20.6mm)
L ogic R eed C ontact B lock
11/16"
(17.5mm)
7/8"
(22.5mm)
7/8"
(22.5mm)
1-3/8"
(34.9mm)
1-11/16"
(42.9mm)
B-260
APG2011 B.indd 260
1-800-ASK-4WEG
5/16"
(7.9mm)
5/16"
(7.9mm)
Data is subject to change without notice.
7/27/11 11:51 AM
www.weg.net
Controls
Pushbutton and Pilot Light - CSW30H Series (30mm) Hazardous Duty
Maintained Flush & Extended h-line Push Button Caps
M aintained E xtended
P ush B utton C ap
Fully-assembled operators come standard with one 3/16” (4.8mm) and three 1/16” (1.6mm) gaskets.
M aintained F lush P ush B utton C ap
( shown with an operator and contact block )
2-3/16"
(55.6mm)
9/16"
(14.3mm)
Mtg. Bracket
1-3/8"
(34.9mm)
1-1/2"
(38.1mm)
2"
(50.8mm)
1-9/16"
(39.7mm)
Operator Hsg.
1-3/8"
(34.9mm)
2-1/8"
(54mm)
1-5/8"
(41.3mm)
Operator
Hsg.
1-3/8"
(34.9mm)
Panel Thk.
(3/16" (4.8mm) shown)
2-7/16"
(61.9mm)
Mtg. Bracket
h-line Reset Push Button
GUARD ATTACHMENT
Fully-assembled operators come standard with one 3/16” (4.8mm)
and three 1/16” (1.6mm) gaskets.
ø1-15/16”
(ø49.5mm)
ø1-3/16”
(ø30.5mm)
1-9/16”
(39.4mm)
R eset P ush B utton
1-3/8"
(34.9mm)
7/16"
(11.1mm)
1-15/16”
(49.5mm)
1-3/4”
(45.2mm)
1/2"
(12.7mm)
Travel
lock-off attachment
5-7/64"
(129.8mm)
2”
(50.9mm)
1-15/32”
(37.5mm)
CAVITY
HEIGHT
1-55/64"
(47mm)
ø1-7/32”
(ø30.7mm)
Data is subject to change without notice.
APG2011 B.indd 261
pushbuttons
2-11/16"
(68.1mm)
2-11/16"
(68.1mm)
1-21/32”
(42mm)
37/64”
(14.7mm)
3/16”
(4.7mm)
WEG Automation - Products and Solutions
B-261
7/27/11 11:51 AM