Visual signaling devices
SPECTRA Flashing Light 15 J
P 400 STR (Ø 140 mm)
Dimensions
20 m
Covering distance
as per EN 54
Ø 110
220
58
20
85°
Operating
temperature
Electrical data
P 400 STR
Rated voltage
230 V AC
115 V AC
24 V AC/DC
Rated frequency
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz / DC
Operating range
207 – 253 V
100 – 130 V
20 – 28 V
225 mA
400 mA
870 mA
Nominal current consumption
Mechanical data
P 400 STR
Ordering details
Light source
xenon flash tube
Article numbers
230 V / 115 V
24 V
Light intensity (DIN 5037) 1
clear, yellow, amber, red, green, blue
Lens type
prismatic
Operating temperature
Lens colour
P 400 STR
Rated voltage
230 V AC
115 V AC
24 V AC/DC
yellow
213 44 10 3 000
213 44 15 3 000
213 44 40 3 000
amber
213 44 10 4 000
213 44 15 4 000
213 44 40 4 000
red
213 44 10 5 000
213 44 15 5 000
213 44 40 5 000
Article numbers for other colours and voltages on request
- 25 °C ... + 50 °C
Relative humidity
90% @ + 20 °C
Protection system according to EN 60529
Service life of the flash tube
IP 65
Options / Accessories
light emission still 70% after 5,000,000 flashes
Material
polycarbonate (PC)
Design
Wall
bracket
bayonet with anti-tamper locking screw
Mounting
surface mounting (wall bracket and tubular stand available as accessories)
Cable entry
1 x 5-7 mm push through grommet (bottom side); 2 x M20 cable entries sideways
Connecting terminals
with a clear lens
1 Hz / 1.5 Hz / double flash
165 cd
Lens colours
Weight
1 Hz
15 J @ 1 Hz
Flash energy
1
120°
Ø 140
- 25 °C
Protection
system
Flash rate
47
+ 50 °C
IP 65
mounting holes
3 x Ø 5.4 mm
25°
cable entry
2 x M20
120
Flashing Lights
Powerful flashing alarm light for universal use
• large variety of mounting methods due to modular design principle:
– surface-mounted devices for mounting directly
or on a wall bracket or a tubular stand
– also for exposed installation locations through
combination of wall bracket and tubular stand
– cable entry at the side (2 x) or through the base of the housing
• durable, sturdy and functionally reliable
due to the use of high-quality plastic
• optimum illumination due to prismatic coloured lens
• electronic components mechanically protected
for highest mounting security
• attracts maximum attention due to adjustable flash rates
• synchronous flash sequence operation of several lights
r=
°
cable entry
Ø 5-7 mm
screw terminals 1.5 mm2
AC
632 g
DC
696 g
GOST
Article number:
213 94 00 0 000
Tubular
stand
145 mm
Article number:
213 95 00 0 000
Wall
holder
only in
combination
with tubular
stand
See pages 106/107 for further information
Article number:
282 50 20 0 000
Conformity to standards
The visual characteristics of flashing lights conform to the European standard DIN EN 842: “Machine safety - visual alarm signals“.
Requirements contained in the DIN EN 981 standard: “Machine safety - system of acoustic and visual alarm and information signals“, can be fulfilled.
The colours ‘red’ for the emergency signal and ‘yellow’ for the warning signal conform to the requirements of IEC 73 / DIN EN 60073 / VDE 0199:
“Coding of display devices and control elements using colours and supplementary means“.
References to visual alarm devices can be found in the following standards:
EN 60825-1
Radiation safety of laser devices, identical to IEC 825 and DIN-VDE 0837
DIN EN 54
Fire alarm systems
DIN 54113-2
Radiation protection regulations for the technical operation of X-ray equipment up to 500 kV
52
www.pfannenberg.com
Further technical information can be found on our website at www.pfannenberg.com
53