TRISTAR
iPhonPod
The best thing happens to cell phone is iPhone*
The best thing happens to iPhone is iPhonPod
to fit iPhone 4S, 5
4.
30-800B Black
30-800W White
1.
6.
3.
7.
2.
5.
8.
What is iPhonPod? It is a support system for the Apple iPhone 4,4S,5. The iPhone is more than a cell phone, it is even more than a DV camera as
it has two lenses, front and back. This feature enables user to shoot HD picture or movie on either side. The iPhonPod has a removable LED light,
this compact LED light is powerful, can fill in shadow or even use as main light in total darkness. The solid bracket holds the iPhone firmly, also, it
is the heart of the system as all the accessories are mounted around it. The mini tripod is stored inside the hand grip. When snapping picture or video,
the hand grip provides a firm grip of the phone rather than using 4 fingers from both hands. With the use of extension handle, in video mode, user
can shoot self-portrait, raise up to shoot the other side of the wall, or over the peoples’ head.
With two speakers, it becomes a portable
entertaiment unit.
(speakers are not included)
iPhonPod contains:
1. Phone bracket
2. Mini tripod
3. Handle
4. LED light
5. Bounce reflector
6. Extension handle
7. Thin black velvet
for iPhone 4, 4S.
8. Thick black
velvet for iPhone 5
iPhonPod, for iPhone 4,4S,5
30-800B (black) 30-800W(white)
LED lgiht can tilt 90
or 180 degrees. Use
bounce board to
prevent glare to
The extension handle also can work horizontally. When use the back
lens, combines with bounce board over the tilted LED light, user can
shoot video with user appears in screen along with background, this is
unique as you can stay in the picture and the background is moving
when you walk, it looks as if a cameraman shoots the video of you while
you are walking. The bounce light illuminate the user without causing
blindness to eyes.
The extension handle can raise up the camera 18” more, so you can
shoot what other people can’t do. Fantastic video when shooting at
night time with street scene.
*iPhone is register trade mark of Apple computer Inc. Cuppertino CA USA. iPhonPod and iPhonGrip are not associated with their products
TRISTAR
iPhonGrip and mini LED light
iPhonGrip, iPhonGrip Pro
iPhonGrip for iPhone 4, 4S
HPL-5 mini LED video light
HPL-5 LED attachment light
iPhonGrip
Model No. 30-801W
(white)
Batteries Lid
Shoe mount
Auto on/off switch
Hook & Loop tape
iPhonGrip
Model No. 30-801B
(black)
The iPhonGrip contains a LED light, a removable handle and a case to
have the iPhone to fit into. The main purpose of this product is to let user
to have a firm, steady grip on the phone. As without this support, user
has to use 4 fingers from both hands to shoot picture or video, which is
not easy to grip on the phone, and may drop the phone if not managing
well. The LED light and the case is one unit, permanently attached, and
the hand grip is removable for convenient storage. LED light can provide
the light for video shoot when shooting in darkness, or pilot light for still
picture when using phone’s built-in flash. The LED light has a standard
1/4” female thread.
iPhonGripPro
Model No. 30-900B
This is the base unit of 30-800B, it has only the hand grip with stoway
tripod, and the iPhone holder for iPhone 4S, or 5 series. The heavy duty
aluminum extrusion holds the phone securely and also it provides a
shoemount for other accessories like microphone, video light etc...
The LED video light is not included. User can purchase separately in
case of necessity. The HPL-5i is just sliding in to secure and is tiltable.
The HPL-5 is a compact LED video light, it is designed for the present
day’s V-DSLR camera with video capability. As most user use TTL
flash for still imaging, but when switching to video mode, there is no
constant light. HPL-5 can be attached on top of TTL flash, and flip it
down when it is not in use. When constant light is needed for video, just
flip it up, the light will be on automatically. It can be used on still imaging
to assist for focusing in total darkness.
Specification:
Size: 3.5x1.5x1.1inch
LED: 12W
Lumen: 200/yd.
Weight:3 oz.
Batteries: 6 x 1.5V AAA alkaline or 6 x 1.2 rechargeable NiMh
Battery life: approximately 1 hour, Batteries are not included.
HPL-5i
LED video light for 30-900B, specification is same as above, but it is
designed to mount onto the 30-900B iPhonPod, not for speed light.
TRISTAR
iPadGrip
The ultimate holder for iPad #30-808
fluid effect
rotating handle
Push button locks
NEW 2013
Clamps on round or
flat surface, range
20-100mm
#110-08 Articulated arm for iPad, together with
SpaceClamp #110-021. This combination can
mount iPad anywhere.
#30-808 iPadGrip, constructed by light weight
aluminum, with fluid effect hand grips for
smooth panning of iPad. White color only.
The iPad 3 has an ultimate holder, It can be mounted
on camera tripod, use the iPad like digital camera, or
mounted on our SpaceArm, an articulated arm that can
be adjusted to any angle with push button positive locking
mechanism. This set up is to transform the iPad to a work station. As
Apple’s iPad is capable to do laptop’s job but without the laptop’s weight,
mounting the iPad this way is a neat and sturdy anyway, anywhere.
The Two handles can turn smoothly thanks to the ball bearing and silcone
grease within. Now, user simply pushes right hand out and pulls left hand
back, the iPad pans smoothly, user needs not to turn the body in order to
have panoramic video clip, also, the iPad gets a more firmly grip. The
#110-021 SpaceClamp can grip on round or square pole, or table leg. User
can separate the iPad from the arm, or take it out from the holder easely.
#HPL-6 LED video light for iPad, easily
mounts on the iPadGrip. runs on 4 AA 1.5V
batteries, (not included) Has full and half power.
#30-808
#110-08
#110-021
HPL-6
iPadGrip
SpaceArm
SplaceClamp
LED video for 30-808
TRISTAR
CamPorta
Steady video with CamPorta, completely hand free !!!
Model 30-380
Shooting up
Shooting down
The CamPorta is a support unit for today’s V-DSLR
camera with Video capability. As the camera with lens,
normally is heavy, the way of the camera is mostly
designed for snap shots, when on Video mode, it is
not comfortable to hold-on, and heavy to use
continuously. This harmness support holds the
camera and becomes part of human body when putting
it on. User has both hands free, and the weight of any
apparatus put on it becomes weight-less as it merges
to the body.
Press buttom to change angle, telescopic column
CamPorta 30-380 is very versatile, it is fully
adjustable to cope with any optical apparatus like
Binoculars, Telescope, Digital Video camera and
V-DSLR camera.
The unit has built-in tilthead, quick mount with tripod
screw. The Harmness is fully adjustable to fit human
body comfortably and firmly. Although it is not a
Gyro type stabilizing device, it does turn out steady
image in video mode on most cameras. Most
importantly, user’s hand is free.
Quick
ZR-02
ZR-03
ZR-04
Shooting straight
zoom ring
range 2-3” lens zoom barrel
range 3-4” lens zoom barrel
Set of 2, contains ZR-03, ZR-03
Thick shoulder pads
Folds up to single unit, flat, comes with carrybag.
Tilt-head
Telescopic columns
Adjustable waist
strap
Quick zoom ring
ZR-02
Quick, and alignment plate
Total weight: 2 kgs
TRISTAR
XYZ-01 rail
TTL flash lighting for micro digital imaging
made possible by our XYZ-01 camera rail
When both of automatic TTL flash are
mounted on the twin TTL cord, which
couples the camera’s hot shoe, a fully
automatic exposure on flash and camera
can be achieved. Twin flash allows more
lighting effect on the object. (TTL cable
available for Canon, Panasonic, Pentax,
Olympus, Pentax, Sony.
(Nikon is not available)
All aluminum construction close-up
camera rail with built- in arms for
TTL flash units. This is the set-up for
micro photography of small things in
our world. The special twin arms are
fully adjustable. Each has a spring
loaded ballhead , equipped with
lockable flash cold shoe mount on it.
One twin TTL cable is included.
Z axis
Y
XYZ-01 Camera rail allows
the camera to flip both
horizontal and vertical format.
The dovetail design on rail
ensures secured and smooth
slide. As the product name
implies, the camera can
move X and Y axis when
camera is on horizontal
format. When camera is in
is
ax
xis
Xa
X axis
vertical format, camera can move X and Z axis only. As micro photography requires only minor adjustment on all axis, this design makes slight
changes of camera position more easily. Most of the experient photographers know, moving the tripod slightly to compose the image, is difficult as
the whole things would be heavy.The two arms are designed like human arms, can position both TTL flashes at any angle or position, this flexibility
allows photographer to cope with difficult lighting problem on small objects. The unit has standard female 1/4” tripod mount at unit’s bottom.
Lockable cold shoe mount
Spring loaded ball head
Arm
Max. 300mm
Min. 80mm
All metal construction
Y axis travel, 100mm
Comes with one twin TTL cable
Canon E-ttLII
Panasonic TTL
Pentex P-TTL
Olympus
Sony
(Nikon is not available)
Z travel, 40mm
X axis travel, 100mm
01-171 (2.8)
Quick release mount with
camera aligment plate
Female 1/4”-20 tripod thread
Safety screws at both ends,
stop quick mount falling out
TRISTAR
Collapsible Reflector/Diffuser panel
Model #50-1000, #50-1000BDK, #50-1000DM
Superb clamp
Mounted on light stand as reflector
Sample of overhead set up with barndoor,
superb clamp shown is not included
Pull and separate all 4 spring loaded tubings
Rest on floor, low angle reflection
Model 50-1000DM, has additional 16mm spigot
tiltable receptacle, this allows the square frame
mounts on lightstand, on the other hand, the handle
rod be used as additional light support to put light
behind the diffuser, this set-up transforms the
reflector panel into a soft light source. This is a
turely versatile lighting accessory.
This ingenous design of reflector/diffuser frame is
rigidly built, able to mount on any light stand with
16mm spigot. The frame can be flipped almost 350
degrees and be locked at any angle. The unit
comes with 3 fabric material, Silver, Gold and
Transucent. The Silver and Gold material has a
white surface on other side. User can use this product as diffuser, or even to emulate light from soft
box. Any make of electronic flash, tungsten light,
fluorescent lamp or LED, can work without problem, no need for speed ring as required by softbox.
This makes it very versatile.
A. 1 pair snap-on aluminum barndoor to avoid
light spillage
B. Aluminum frame held together by pre-loaded
rubber spring
C. Handle/floor supporting rod
A.
Folds up easily for storage
Hand held for mobility
50-1000 contains 1m x1m frame, 3 x fabric material, has built-in swivel mount, 1 x removable
handle rod and a tote bag.
50-1000BDK is same as 50-1000, except it
comes with additional pair of aluminum, snapon barndoor.
50-1000DM is same as 50-1000, except frame
is silver in color, with additonal 16mm swivel
spigot mount for additional arm to attach light
source on it.
B.
C.
TRISTAR
1x1M fabric material
Optional fabric material for #50-1000, 50-1000DM
50-1000BLKA, 1m black cotton material w/
center removable patch for camera shoot thru,
this eliminates camera, photographer getting
into picture when dealing with reflective objects.
50-1000BLK, 1 m black cotton material only,
used to block light
50-1000S/G, 1 m silver and gold with wave
pattern for light gold reflection, flip side, white
6 cm square
Removable patch held by
hook and loop fastener
50-1000TA, 1m translucdent diffuser with
center removable patch for camera shoot
thru, this allows light source to place next to
the camera lens, for shadowless front light.
6 cm square
Removable patch held by
hook and loop fastener
50-1000S/B, 1 m silver mylar laminated with
black backing, Heavy gauge nylon material
50-1000MES, 1 m white mesh diffuser, to
diffuse harsh sun light with 1f stop light
reduction.
50-1000WD, 1 m translucent window diffuser,
great to have window catch light on reflective
objects.
Replacement material
50-1000T, 1 m translucent diffuser only
50-1000S, 1 m silver/white reflector only
50-1000G, 1 m gold/white reflector only
TRISTAR
Collapsible Reflector/Diffuser panel
Model #50-1450 size 1.45 meter
To diffuse light
To reflect light
10mm Square
hole with
removable
patch
The 50-1450 large Reflector/diffuser panel is portable
yet large enough to tackle any lighting job requires
total light control. It measures 145cm square when
opens up, this means large light source, large reflection
surface, blocks unwanted light or reflections. It has
light weight yet strong aluminum frame, fits on standard
16mm stand spigot, or stands up by itself with the
supplied 2 section support pole. The 25mm spring
loaded frame folds up easily and neatly. It comes with
3 pieces of fabric material: 1x 1.45m translucent, 1x
1.45m matt black and 1x 1.45m Silver/White. The
Translucent and Matt black material has a center
removable patch, when removed, it has square hole,
size 10x10cm. This allows camera to shoot thru this
hole. The whole frame weights only 2kgs, it has foam
hand grip one on each side for hand held use, and a
swivel 16mm stand spigot receptacle to mount on
stand directly. The whole panel fits into a supplied
totebag together with the fabric material. The 501450 does not require any tool or screw or knob to
assemble. The spring loaded cord holds the frame
together when setting up. To dissamble it, just pull and
separate the tubes then fold them up. This reduces
the size down to 1/5 of open size.
Contents:
1 x 1.45m frame, 24.5mm diameter
1 x Telescopic rod, 2 sections
1 x 1.45m silver/white fabric material
1 x 1.45m black fabric with center hole, and removable patch
1 x 1.45m translucent material with center hole, and removable patch
1 x tote bag to carry all above items.
130cm
When folds up, it measure 130 x 24cm
The telescopic pole is 1.3m when
extended.
To block light
TRISTAR
Collapsible Reflector/Diffuser panel
Model #50-2X2M
The 50-2X2M translucent diffuser frame is designed to diffuse the
harsh sun light, It is the same design as our flat panel series-aluminum
frame with inner spring to pull all sections together. The unit comes
with translucent and white mesh screen. Stand is not included. It can
be used on floor level or mounts on light stands. Size is 2 X 2M. It
requires no tool to assemble and mounts on 16mm spigots. Folds
down to 1/6 of its size. Supplied with carry bag.
20-C ST-BM Steel Cstand
with 1m boom arm, 2
swivel clamps. Max. height
3m.
20-C ST Steel Cstand
only, 3m tall, with slope
adjustment leg. a must for
large reflector panel.
Model #50-1X2M
The 50-1X2M Flat reflctor panel is
constructed of aluminum material, rigid
yet light weight, It collapses down to
1/4 of its full size. The inner spring pulls
all sections together, easy to set up
or fold up without tool. The unit comes
with built-in adjustable support at the
back, ideal to put light behind it when
using the translucent material as large
diffuser. The product comes with
carry bag, to hold the frame plus the
Translucent and silver/white material.
TRISTAR
Quad Speed light Holder
QuadFlash Tilthead #RF-400 and # SE-400
Model # RF-400
RF antenna
RF transmitter w/shoemount
RF-400 with our semi-softbox mounted
on. The model 40-600S semi-softbox
contains 4 fiberglass rods, and a 60cm
square diffuser with black light shield
around 4 sides. This is to avoid light
spilling outside the diffuser. As the speed
light strikes the the diffuser directly, so
there is no need to have a reflector on
this semi softbox. This makes it easy to
assemble and requires no speed ring.
Professional class product.
Model # SE-400
The RF-400 and SE-400 QuadFlash
Tiltheads can handle 4 portable speed lights
with hot-shoe mounts. Any speed light from
top of the line to old manual units are
suitable to be used on this head.
Both units are suitable to use with any photo
umbrella or semi-softbox from us. There are
two models, RF-400 has a 16 channel radio
frequency trigger built into the unit. Speed
lights can be fired wirelessly by remote
transmitter, which fits on camera’s flash
mount. The range is 30 meters. The special
designed radio transmitter and receiver are
sensitive and misfire proof.
The SE-400 can handle speed lights like
the RF-400, but it is designed to be triggered
by camera’s on board flash unit. It has a
selection switch to match the pre-flash
system of Digital camera’s on board flash,
or large add-on flash unit. The Aluminum
casing can be rotated 45 degree in order to
use umbrella or softbox. They both fit onto
standard 16mm stand spigot. A handle
behind the head allows to tilt the head easily.
Now, user can use any old or new speed
light and turn it to a powerful studio light
with power control, by selecting individual
flash’s power settings. QuadFlash tiltheads
are so versatile and require no AC power to
run. They are most suitable on location, or
outdoor lighting but AC power is not
available, yet they deliver vast amount of
light.
40-600S
Semi softbox
Rotating to X position to fit umbrella
Specification:
RF-400
Radio Frequency triggering system to
fire 4 speed lights with hotshoe mount.
Comes with shoemount transmitter. 16
channels, runs on 433Mz. Range 30m.
Unit can rotate 45 degrees when using
umbrella. It has digit readout and on/off
switch.
SE-400
Light sensing triggering system to fire 4
speed lights with hotshoe mount. It can
be fired by on board or add-on flash.
Depends on digital cameras, unit can be
set 1, 2 or 3 preflash.
Requires 4x AAA alkaline batteries (not
included)
Rotating to + position for semi softbox
Net weight: 1.8kg.
TRISTAR
New booms and FloMonoPod
Boom, Arm, Clamp and FloMonoPod
110-06B Miniboom
110-05B SpaceArm
Max. L. 6ft
Max. load: 6 lbs
Fits on 5/8” stand spigot
Tubing dia. 5/8 and 3/4”
Counter weight: 5lbs
Push button locks
The SpacArm
is an uniquely
designed arm.
It is so versatile
and rigid. Easy
push button locks
positively, fits on
5/8” stand spigot. Its
arm configurates like
the arm of space shuttle.
It can be separated into
two pieces if two lights
are needed. Comes with
one SpaceClamp.
30-308 FloMonoPod
Can break into two pieces
The self-leveling FloMonoPod is a partial
monopod and partial FloPod. This support is
designed for V-DSLR cameras. When in Video
mode, it can be used like monopod when user is
not moving, but when user needs to walk or run,
the camera will be steady and always in
horizontal plane when it is off the ground. The
FloMonoPod has a gimbal built under the
camera, so it floats when lifting it up off the
ground. The weight of the pod acts as counter
balancing device to keep the camera in horizontal
position and floats when user is in motion. It has
quick release mount, sliding rail to balance the
camera in center of gravity. The FloMonoPod
has a fluid effect leveling pad at the tip of pole, so
it acts like fluid head when panning the camera.
Tubing diameter: 1, 7/8, 3/4, 5/8” diameter
Material: aluminum tubing
Camera head: yes, with x and y adjustment
Two handles: one for monopod function and one
for FloPod function.
5/8” spigots
Photo of
SpaceArm in
two arms config.
Max. weight is 5 lbs ea.
with sand bag to counter
balance.
Built-in 5/8” spigot
Max. load for camera: 6 lbs.
Max. height: 5.5ft
Net weight: 3 lbs
110-021
SpaceClamp, clamps 20-100mm dia. pole
All metal construction
TRISTAR
MiniStudio Flash kit
Micro processor control digital electronic flash kit for DSLR cameras
close barndoors to protect flash tube
hold-all compact, soft carry case
adjustable barndoors to shield light
optional diffuser 60-120JD
easy to mount on 40x40cm softbox
The simple, easy to control back panel enables
user to choose complex function on flash
settings, thanks for the micro processor inside
flash.
RF trigger
mode LED
Light
Sensor
Sync mode
button
Test
button
Pilot On/Off
Flash/Pilot
power knob
Kit models:
Radio
channel
digital
readout
*60-PC120J/K2UM/120 or 220
Contains 2 x flash heads, 2 x stands, 2 x silver umbrellas, 1x 10ft pc sync cable with PC plug.
Channel
button
*60-PC120J/K2BX/120 or 220
Same as above, but with 2 x 16x16” softboxes
Ready
light
Fuse
holder
60-RF120J/K2UM/120 or 220
Contains 2 x flash heads, 2 x stands, 2 x silver umbrellas, 1 x radio transmitter, 16 channels.
60-RF120J/K2BX/120 or 220
Same as above, but with 2 x 16x16” softboxes
Above kits all come with soft carry case
All models PC sync are electronic camera safe.
Low Profile transmitter
with digital readout for
channel setting. Comes
with Model:
60-RF100J/K2UM and
60-RF100J/K2BX
silver photo umbrella, 24” diameter
PC
sync
LED
Pre flash sync
LED, red,green,
orange indicates
preflash in 1,2,
or 3 modes
RF Version
User replaceable flash tube and halogen pilot
light, protected by built-in barndoors when closed
and put in carry case for traveling.
Built-in barndoors
Radio trigger specification:
Range: 60ft
Frequency: 433Mz.
Channels: 16, 0-9, ABCDEF
Shutter speed sync: 1/60 sec.
Battery: 12V 23A alkaline (included)
Slave sensor specification:
Range: 30ft
Flash sync mode: 3 modes, Red, instant sync,
Green, 2 preflash sync, Orange, 3 preflash sync.
*this model does not has RFchannel digital readout.
3.5mm
sync
cable
outlet
Parabolic
reflector
Rachet
locking
mechanism
5/8” stand
spigot mt.
75W
pilot light
Umbrella
receptacle
10,000
cycles
flash
tube
Techincal specification
Power: 120Joules per head
Color Temp. 5600K
Flash duration: 1/1000 sec.
Recycle: 3 seconds
Flash/Pilot light adjustment: Stepless
Pilot Light: plug-in, 75W halogen
Flash tube: plug-in, 10,000 cycle,
Casing: all metal, built-in barndoors
Stand mount: 5/8” stand spigot
Power cable: 12ft, 3 wire, w/in-line switch
Fuse: 6A/120V, or 3A/220V
Stand: Aluminum, 4 sections, 2m tall
Flash casing size: 3.8” dia.x7” L.
Each flash head weight: 3.2 lbs
2 light kit weight: 14.5 lbs
Carry bag size:7x7x25”
TRISTAR
RF Hybrid Trigger
DSLR camera, Flash trigger in one
Product # RT-20K-4XXX
NEW 2013
This Hybrid trigger is designed to trip the DSLR
camera or fire the flash unit by Radio Frequency.
It has a range of 50m. The low profile transmitter
has no ugly antenna, and is merging to the camera
body. The large color Digit readout is bright and
clear. Transmitter runs on 12V small Alkaling
battery, can last for long time like Garage
openers. Battery is included. The transmitter has
an PC sync outlet for PC sync cord. (sold
separately)
Specification:
Frequency:
Channel:
Range:
Shutter speed sync
Order code:
Canon
Nikon
Olympus
Panasonic
Pentax
Sony
comes with RTC cables
RT-20K-4CAN
RT-20K-4NIK
RT-20K-4OLY
RT-20K-4PAN
RT-20K-4PEN
RT-20K-SON
2 RTC cables
3 RTC cables
2 RTC cables
1 RTC cable
1RTC cable
1 RTC cable
2.4GHz
4
50m
1/125 sec or more
depends on Camera
Transmiter:
Standard hotshoe mt or
Sony/Minolta shoe mt.
Battery:
1x 12V 23A Alkaline type
Receiver:
Strap to cling on camera
and Hook N Loop selfadhesive tape.
Battery:
2x AAA 1.5V Alkaline
Indicator
4 color LEDs
Sync Jack
3.5mm,or with 6.2mm
adapter
DSLR remote plug Supplied, refer to RTC cable
TRISTAR
CooLED 50, 80
HPL-800 MonoBloc High power LED
This is a set of 2 high power SMD type LED studio light. Unlike the traditional
light bulb, CooLED 50 and CooLED 80 are pure electronic, no tungsten filament,
no gas, no arc electrode, no lamp socket, no mercury vapor found in fluorescent
tube. A pure, clean enviromental product that lasts for 50,000 hours. The key
advantage of this light is economical to use, only 50W or 80W respectively on
each lamphead, and they generate very low heat, produce high intensity, and
work on 110-230VAC, so, can be used anywhere in the world without voltage
problem.
The CooLED 50 and 80 are specially designed for photography, videography
purposes, it is a monobloc type studio light, It has a fixed 50 degree reflector,
and all the constant light features, •above all, it emits daylight color. It fits on
standard 5/8” stand spigot, accepts umbrella. Each lamphead comes with 2
barndoors, and a removable lenticular lens, this lens is to widen the light angle
horizontally. A much superior LED over the other panel type of LED, contains
hundreds of tiny dots of light, which cast unnatural step shadows, not able to
use umbrella.
The CooLED 50 and 80 have a clear color, frosted glass dome, it is to spread
the light from the high power LED evenly over the fixed reflector surface, to
increase the light output and modify the light to be similiar to the traditional
parabolic reflector light pattern.
Easy to add on filter holder
The light can be used continuously, 24 hours a day or 360 days a year.
Although there is a fan inside, but it is not noticeable unless putting the ear next
to it because the fan turns very slowly, just enough to move the air inside the
lamphead, so no problem for HD video or sound studio. It has all metal casing,
rigidly built, and neatly to store inside a well padded steel case. A true revolutionary
studio light design over the glass bulb counter-part. It is possible to use 12V
battery by means of 12V DC inverter, to use car battery or small lead acid battery.
A 12V 6 Ah lead acid battery can last one light for about 30 minutes.
specification:
Applicaton: for Still or video
Type: SMD type LED, 50W, or 80W
Color Temperature: 5200K +- 3%
Temperature working range: -4C to +40C
CooLED 50 : 3500/m Lux with fixed 50 d refector
CooLED 80: 5000/m Lux with fixed 50 d reflector
Dimmer: full and half power
Light Angle: 50 degrees
Total power consumption: 50W, and 80W
respectivelyoltage: 110-230VAC, fuse 1.5A
Cooling fan: built-in
Umbrella receptacle: Yes
Noise level: 0 db 3 ft away
Life span: rated for 50,000 hours
Degradation of lumen: 0.3% /10000 hours
Casing: All metal, with U yoke, 5/8” spigot receptacle
Power Cord: attached, 10ft, 3 wire with in-line switch
Total weight: CooLED 50, 22 lbs. CooLED 80 25lbs
Barndoors to use with or without diffuser
HPL800-TUN
Color conversion
filter, 3200K
HPL800-LEN
Lenticular lens
TRISTAR
HPL-800/50K2, HPL-800/80K2
CooLED 50W
Two light kit
Product number HPL-800K2/50 contains:
2 pcs. CooLED 50 lamp heads, 50W
2 pcs 7.5ft, 5 sec. aluminum light stands
2 sets 2 leaf barndoors
2 pcs Lenticular Lenses
2 pcs. 10x10” diffusers
1 set HPL-RBY 3 color filter set
1 hold-all steel case
CooLED 80W
Two light kit
Product number HPL-800K2/80 contains:
2 pcs. CooLED 80 lamp heads, 80W
2 pcs 7.5ft, 5 sec. aluminum light stands
2 sets 2 leaf barndoors
2 pcs add-on diffusers, 10x10”
2 pcs Lenticular Lenses
2 pcs white umbrella with removable backing
2 pcs Daylight to Tungsten 3200K conversion filter
1 set RBY 3 color filter set
1 hold-all steel case
There are Black and Yellow color to choose from
Steel case weights only 8 lbs and gives
maximum protection, size is 25” x 9” x 16”.
TRISTAR
CooLED 100, 200 lamp head
HPL-1600/100, or 200 MonoBloc LED
The CooLED is specially designed for photography, videography
purposes, it is a monobloc type studio light, it has all the traditional photo
studio light mounting design, fits on standard 5/8” stand spigot, accepts
umbrella, interchangeable reflectors, has full line of other accessories like
softbox, beauty dish, snoot, fresnel spot, barndoors etc. This is a much
superior LED over the other panel type of LED, contains hundreds of tiny
dots of light, which cast unnatural step shadows, has problem to use
reflector, softbox, umbrella, spot attachment, etc.
The CooLED has a clear color, frosted, removable glass dome, it is to
spread the light from the high power LED evenly over the conical reflector
surface, to increase the light output and modify the light to be similiar to the
traditional parabolic reflector light pattern. Also, there is an optional amber
glass dome to turn the light to 3200K tungsten light color instead of the
original 5200K daylight.
The light can be used continuously, 24 hours a day or 360 days a year.
Although there is a fan inside, but it is not noticeable unless putting the ear
next to it as the fan turns very slowly, just enough to move the air inside the
lamphead, so no problem for HD video or sound studio. It has all metal
casing, rigidly built, and compact for storage, a true revolutionary studio
light design over the glass bulb counter-part.
CooLED comes with one clear color, frosted glass dome, one mirror
finished conical reflector, one protective cap, and fabric diffuser. It is
maintenance free, trouble free, almost instant on, (1 second delay) no
warm up period, can be switched on-off-on without waiting for re-stike which
requires on HID, or HMI type of light.
Applicaton: for Still or video
Type: Semiconductor LED, 100W, 200W
Color Temperature: 5200K +- 3%
Gradation adjustment: 2 f stop with half stop interval
Temperature working range: -4C to +40C
Lumen: 10000/m with conical mirror 40d refector (CooLED 100)
Lumen: 20000/m with conical mirror 40d reflector (CooLED 200)
Voltage: 110-230VAC, fuse 3A
Cooling Fan: Yes, built-in
Noise level: 0 db 3 ft away
Life span: rated for 50,000 hours
Casing: All metal, with push button tilting head
Power Cord: attached, 10ft, 3 wire with in-line switch
Weight: 4.5 lbs
Mounts: bayonet type on reflector, 5/8” receptacle on stand spigot,
accepts umbrella
Standard accesssories: 40 degrees conical, mirror type reflector,
protective
cap, frosted clear glass dome,
fabric sock diffuser
TRISTAR
CooLED 100, 200 kits
HPL-1600/100K2, and HPL-1600/200K2
The HPL-1600 2 light kit comprises 2 set of CooLED lamp heads, besides the
the standard set of lampheads, it also, comes with 2 x 7.5ft, 4 sectons, aircushioned stands, 2 x 36” diameter, translucent umbrellas for shoot thru or reflect
purposes, plus 2 black/silver removable covers for parabolic reflection use. When
using the black/silver cover on the translucent umbrella, it delivers brighter light
as most of the light is reflected back to subject and also produces soft, diffused
light. When using the translucent umbrella only without the black cover, it weaken
the light as some of the light goes thru the material hence weakens the light no
matter the umbrella is being used either way. These two umbrellas with the
removeable cover has more light control on diffused light.
with translucent umbrella with
removable backing
In additional, there are two fabric diffusers come with the set, they are designed
to put directly onto the reflectors. Unit comes with hold-all carry bag with wheels
so everything fits into a compact case and user can wheel around with ease. The
kit is great for location work, still life, videographing, imaging, etc...
On the CooLED 100W, it is possible to use 12V DC battery power by means of
a AC inverter*, which turns the 12VDC to 110 or 220V AC. A small 12V,12Ah
lead acid battery can run the unit with full power, about 30 minutes, it runs more
if car battery is being used. This solves problem when AC wall socket is not
available but light is needed. *AC inverter is available in local electronic store
and is not our product. Both 110V or 220V version can be used as the CooLED
works on both voltage.
The light stand is the latest design, it features air-cushioned, black anodized
aluminum material, flat leg design to add more weight on bottom part, keeps the
light well balanced and not easy to tip off. It has all metal flip locks on collets
and never breaks compare with metal die-casting or plastic version because
ours is made by high density aluminum extrusion material. Each section has
built-in valve to prevent vacumn problem when pulling up the stand sections.
HPL-1600/100K2 or HPL-1600/200K2
2 x CooLED Lamp heads
2 x Mirror conical reflectors
1 x Reflector case
2 x Protective caps
2 x frosted glass domes
2 x 7.5ft, 4 section stands
2 x White umbrella w/removable black
backing
2 x fabric sock diffusers
1 x hold-all carry bag with wheels
and retractable handle.
TRISTAR
Optional Accessories for HPL-1600 Lamp head
#HPL-24BX
Description: 22” fold flat softbox wth ring
#HPL-65-FS
Fresnel lens, variable spot attachment for HPL-1600
LED light,
4-leaf barndoors is not included.
#HPL-626
3200K conversion filter sheet to use with HPL-65-4BD
#HPL-65-FSBD
Description: 8” 4 leaf barndoor with fixed focus
fresnel lens.
#HPL-12
Description: 8 holes softbox ring for fiberglass
rod type softbox
QFH-65-4BD
Description: barndoors weight 1 lb, with magnetic color gel
holder
#QF-002
Description: Snoot for HPL-1600 with 2 honeycomb grids
TRISTAR
AD-G63-E27
2 E-27
adapters
for 6.3mm
type two pin
halogen bulb.
Max. 650W.
Adapters
P.1
11-045
adapter, male
flash shoe
to 1/4” male screw.
black anodized
11-046
adapter, male to male
flash shoe, Black
anodized
Bulb is not
included.
11-003
adapter, 3/8” stud
to 1/4” male screw
11-001
flash cold shoe
mount, spring
to hold flash
unit. 1/4” female
thread at bottom
11-005
3/8” dia. stud
11-045A
Adapter, male
flash shoe
to 1/4” male
screw
2.5” long, plated mild steel stud
with female thread 1/4”,
11-008
5/8” spigot w/female,
male 1/4” thread
11-006
1/2” dia. double stud
with
3/8” , 1/4” female
thread
11-001A
flash cold shoe
mount, lockable.
1/4” female
thread and
male flash shoe
at bottom
11-004
Brass reducer,
3/8” female thread
to 1/4” female thread
11-007
5/8” dia. double stud with
3/8”, 1/4” female thread
metal spigot, 5/8, with
1/4” male screw on top
and 1/4” female
thread at bottom.
ADR-NI-CA
Lens adapter ring for Nikon Lens to Canon
DSLR camera body. (automatic function
is voided when using this adapter)
11-009
mild steel double stud
with 3/8”
and 1/4”
male
screw
01-132
Binoculars holder,
has male and female
1/4” thread. Designed
to affix Binoculars
on camera tripod.
3” long.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
TN-3/16ABS
ABS thumb nut,
3/16” thread, Brass insert.
TN-1/4ABS
ABS thumb nut,
1/4”-20 thread, Brass insert.
TN-TPABS
ABS thumb nut,
double spiral thread,
for light stand collets,
Brass insert.
TS-1/4-1.2ABSM
ABS thumb screw,
1/4”-20 thread, mild steel
screw, 1” long
Thumb nuts/screws
P.2
KS-1/4AL
Stealth bracket camera
knob screw, female
1/4” thread at bottom.
TS-1/4-6C
All metal thumb screw
for LED video light
HPL-3
TS-1/4-5/8ABS
ABS thumb screw,
1/4-20 thread, Brass
insert. 5/8” long
TS-1/4-1/2ABSM
ABS thumb screw,
1/4-20 thread, mild steel
screw, 1/2” long
TS-3/16
All metal thumb screw,
3/16” thread, brass insert.
KS-1/4ABS
ABS knob screw,
1/4”-20 thread, aluminum
screw, 5/8” long,
no thread on bottom end.
KN-M3
All metal knob nut, with
M3 screw,
TS-1/4-4C
All metal thumb screw,
1/4”-20 thread. Mild steel
screw.
KS-1/4ABST
ABS knob screw,
1/4”-20 thread, aluminum
screw, 5/8” long,
with 1/4” thread on bottom
end.
KS-M3
All metal knob screw,
M3, mild steel screw,
3/8” long.
KS-1PT
knob screw
3/16” x3/4”
KS-3/16BR
3/16” knob screw,
nickel plated, brass,
1/2” long
KS-3/16RT
Security knob
screw
3/16” x 1/2”
KS-1/4BR
1/4”-20 knob
screw,
nickel plated,
brass,
5/8” long
Racheted handle
thread.
1.
2.
3.
1.
with
HN-M10
HN-5/16
HN-1/4
KS-M4BD
M4 thumb screw for
BeatiDish
retaining
ring.
2.
TS-1/4-1ABS
ABS thumb screw,
1/4”-20 thread, Brass
insert. 1” long
TN-1/4ST
All metal thumb nut,
1/4”-20 thread, for flat leg
stands.
3.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
Tripod and Monopod
P.3
Tubing diameter: 26,22,19mm.
Min. 67cm/26.5in
Max. 165cm/65in
Weight 0.6kg/1.4Lb.
Monopods
A. 30-301-3
Aluminum monopod in 3 sections. Comes with quick
release camera mount. Air cushioned. All metal locking
collets, half turn lock/unlock, 1/4in-20 tripod screw.
Tubing diameter
26,22,19,16mm.
Min. 58.5cm/23in
Max. 162.5cm/64in
Weight 0.7kg/1.6Lb.
B. 30-301-4
Aluminum monopod in 4 sections. Comes with quick
release camera mount. Air cushioned. All metal locking
collets, half turn lock/unlock, 1/4in-20 tripod screw.
A.
B.
Tripods
J. 30-330
All aluminum camera tripod, black, comes with small ball
head and quick release mount. Tubing dia. 23,19,16mm,
anodized black color. Legs spread 3 position for low angle.
Min. 38cm/15” Max. 132cm/52in W. 1.6kg/3.6Lb.
K. 30-331
All aluminum camera tripod, black, comes with large ball
head and quick release mount. Tubing dia. 27,22,19mm,
anodized black color. Legs spred 3 position for low angle.
Min.44.5cm/17.5in Max. 150cm/59in W. 2.4kg/5.4Lb.
L.
L. 30-332
All aluminum camera tripod, black, comes with 3 way pan/
tilt head and quick release mount. Tubing dia. 30,25,20mm,
anodized siver color. Legs spread 3 position for low angle.
Min. 44cm/17.5in Max. 175cm/69in. W. 3.5kg/7.8Lbs
K.
J.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
11-014
flexiArm with 5/8” stud, 1/4”
male at one end, 1/4” female
thread at other end, 11” long
11-016 22” flexi-Arm with clamp, 5/8” spigot, 1/4” screw at top
11-015
flexiArm with 5/8” stud w/1/4”
screw, 1/4” female thread at
other end. 22” long
11-017 22” double flexi-Arm with
clamp, 5/8” spigot, 1/4” screw at top
11-011
superb clamp
w/double stud
aluminum diecasting
11-012
7” extension bar only for superb clamp
11-026
Extensionbar for superb clamp/
Imager lamp head
11-028
Miniclip with male
and female 1/4”-20
screw thread.
Clamps & Arms
P.4
11-013 18” extension bar for superb clamp, no double stud
11-024
metal clamp with 5/8”
stud, rubber grip
1/4” tripod screw,
extra 11-009 double
stud
11-025
Double miniclip, works best on
reflector clip on barndoor, or other
lighting control flaps, with fraction
stop
1/4” female thread
11-023
1/4” male thread
11-029
Mini clip, rotate-able,
fits on 1/4” tripod
screw
metal clamp
with 5/8” stud
rubber grip
1/4” tripod screw
110-021
11-030
Double miniclip, fits on 1/4” tripod
screw, rotate-able, to handle large
flap, or barndoor.
1 pc. “A” style all metal clamp
designed to clamp on 20-100mm
square or roung column, has double
16mm spigot. Perfect for lights mount
directly onto any stands or poles.
Max. load 5kgs.
11-031
Miniclip with 9”
flexiArm, 1/4” female
thread at other end.
10-104BK
battery pack holder w/1/4” screw
clamps on
tubing up to
1.5” dia.
11-032
Double miniclip with 9”
flexiArm, 1/4” female
thread at other end.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
FLH-1200/120,230
Lamp heads/sockets
P.5
FLH-950/120,230
for use with
SB-28 and
SB-85 CFL
Bulbs
for use
with SB-28
CFL bulb
only
FLH-360/120,230
for use with
SB-28 CFL,
JDD-250
bulbs
FLH-650/120,230
for use with
SB-28 CFL
bulbs only.
Back side of
lamp head
10-600/120,230 ceramic E-27 lamp
socket with all metal
bracket, 12’
3 wire cable.
In-line
switch.
120
Max. 500W.
Ceramic
sockets
10-401/E,N
ceramic E-27 lampsocket with
cold shoe mount. 12ft power cable
with inline switch.
10-101/E,N ceramic socket
umbrella/flash tilthead, and
lampsocket for pilot lamp
as one unit. E-27
socket is ceramic
for light up to
500W
10-300/E,N
designed for low wattage lamps.
all ABS plastic, with E-27
base. Max. 60W.
12ft 2 wire cable.
50-500K-5C
5 color filter
set
FL-28/E,N
complete lamphead with small foldable stand, and SB-28 CFL bulb,
color filter set is optional.
10-C300/E,N
same as 10-300, but with
11-023 metal clamp as one unit.
10-500/120,230 ceramic E-27 lamp
socket wtih ABS
bracket,
12’ 3
wire
cable.
inline switch.
Max. 500W.
230
10-400/E,N ceramic socket
lampsocket for
500W photo
flood lamp
with builtin reflector
10-C400/E,N
same as above, but with 11-023
metal clamp as one unit.
E.
N.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
Tiltheads
P.6
10-102
all metal flash/umbrella bracket
for hammer type flash units.
It accepts small
flashunit too,
has 2, 1/4”
knob screw.
10-102-2
same as 10-102, except it has
extra shoe mount for
10-401 E-27
socket.
10-103
Alu. die-cast umbrella/flash
tilthead, fits on 5/8” stand
spigot,comes with 1/4”
and 3/8” insert for tripod,
has 5/8” aluminum
spigot.
10-100
Alu.die-cast umbrella/flash
tilthead, fits on 5/8” stand
spigot,comes with 1/4”
and 3/8” insert for tripod.
fits electronic flash
shoe.
10-100A
Alu.die-cast umbrella/flash tilthead,
fits on 5/8” stand spigot,
comes with 1/4” and
3/8” insert for tripod,
has 1/4” tripod screw
on top.
10-101
it has same function as 10-100,
except it has extra extended
bracket for screw mount
accessories.
10-103A
Alu. die-cast umbrella/flash
tilthead, fits on 5/8” stand
spigot,comes with 1/4”
and 3/8” insert for tripod,
has 5/8” steel spigot,
and /4” screw on top.
10-101A
it is similiar to 10-101, but
has two 1/4” screw on each
side.
10-104TT
01-150
Quick release
mount w/01-151
plate, 1/4” female
thread at bottom
01-151
quick release plate
only
designed for use with two portable
flash units, one at each side of the camera.
Camera is in the middle of bracket. fits on
tripod, comes with 3/8” 1/4” adatper.
10-104T4
30-21
professional ballhead with 01-151,
fits on tripod with 1/4” or 3/8” screw.
Pan,
tilt
controled
by one
knob.
designed for use with 4 portable
flash units, to use with umbrella.
tripod, comes with 3/8” 1/4” adatper.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
PL-T55W
55W T-5 tube,
5000K
PL-T55BL/120,230
Ballast for PL-55W
P.7
Bulbs and ballasts
PL-C83BL/120, 230
Replacement electronic ballast
for PL-75 circular fluorescent
tube. Used on CircleM, CircleT
and circleV 85W circle
light,completed with spiral cord,
casing and belt clip. Power cord
is not included
PL-83W
Replacement fluorescent tube for FL-CircleM,
FL-CircleT, and FL-CircleV. 83W, 5500K
FT-36R-1.1
Replacement ring flash tube
for PortaImager
160WS
BB3RD-FT
Replacement
flash tube for
50-3RD Digital
Barebulb.
JTT1000/230
1000W Quartz halogen
bulb. 3200K, Tubular
shape,
with E-40
mogal
base.
JDD250FR/120,230
Ultra bright, 3200K, 250w
quartz halogen bulb. Average
life is 100 hours, fits on all
E-27 screw base, ceramic
socket. It is used widely on
our F, Q, and QF Imager
series lampheads. Bulb life
can be extended if used on
our lampheads with dimmers.
JCD-300
120,230
and
JCD-650
120,230
SB-85/120,230
5200K daylight Metal Halide
bulb. E-27 screw base.
Average life is 7000 hours.
Works only on our HMIImager lampheads. 12500
lumens. 150W equals to
800W incandescent bulb.
Diffusion coating is in outer
glass. Use with caution,
needs proper protective
shield as it is hot in inner glass
envelope.
5200K daylight
spiral
fluorescent
bulb.
Equals to
550W
incandescent bulb.
CRI 82.
E-27 base.
CRI 82
quartz
halogen
bulb.
2 pins.
MH-150W
SB-28/120,230
5200K daylight
spiral fluorescent
bulb. Equals to
120W incandescent bulb. CRI 82.
E-27 base.
XFT-001-01U
Half circle flash tube
for Flasi-imager,
needs two to form a
ring in one unit.
AD-300W-E27/120,230
Set of 300W halogen
bulb with E27 socket
AD-650W-E27
Set of 650W halogen
bulb with E27 socket
PL-27BL/120,230
Ballast for FL-500,
FL-1000
PL-27W
5500K fluorescent tube, 27W,
for FL-500,FL-1000
ZX1052
Ring flash tube
for Hybrid, QFImager
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.8
three axis
two axis
one axis
ANFI-01
90 degree angle view finder for DSLR
camera. comes
with 3 rubber
finder adapters.
Rotate-able
for horizontal
or vertical
view.
XYR-1
X and Y axis rail for accurate position
of camera. Designed for fine tune on
both X and Y axis.
Mountable
on tripod
Other accessories
Camera shoe mount spirit level
For Standard shoe mount
SL-A1
one axis bubble level
dual shoe
SL-A2
two axis bubble level
dual shoe
SL-A3
3 Axis bubble level
single shoe
For Sony shoe mount
SLS-A2 two axis bubble level
dual shoe
SLS-A3 three axis bubble level
single shoe
30-401 vacumn box
10-2000
polycarbonate vacumn box. To store delicate apparatus like camera, lens, etc.
The box has built-in vacuum pump, once apparatus have been store inside,
close the lid, and use the handle to suck out the moisted air, to keep the box
dry within. Strongly build to withstand rough handling. Best for traveling with
it on location, sand, dust, rain will not be a problem.
Also, to keep expansive
camera and lens in house
for storage. Camera bag
can’t give this kind of total
protection.
silicon seal
sand bag
QD-600/120.230
stepless light
dimmer,to use
with our Econ
light kit. It works
on incandescnt
lamp only, up
to 600W
It has humidity meter, to see
inside case, silcone seal,
rubberize handle, high tech
design.
New in Photokina
vacumn pump
It is maintenance free as
it requires no silica gel,
which needs to replace
from time to time.
gauge
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.9
Automatic triggering device
Imaging Automation
We have pioneered an automatic image capturing system to enhance the Digital SLR cameras. The system contains a
Passive Infra-red detector, a Radio camera
trigger device, adapter cable for popular DSLR remote control port and a
vibration
probe sensor.
IRX-8
IRX-8, PIR detector, it is a motion detector, when object is moving in its
covering area, it will send out a signal to external port, which can be linked to a radio
transmitter, or a electronic flash unit. The IRX-8 has a pair of barndoor, which can narrow
down the angle of coverage. It has a PC socket, and a 2.5mm phone jack port. The
coverage is 120 degree and downward via the control of barndoor. Unit comses with a
flexarm for mounting the unit on tripod screw with angle adjustment. The detector can
work on day or night time as it is triggered by movement. It is great for self portrait, wild
life or any thing imaginable to shoot picture without any operator.
RT-08K-10
RT-08K-10, (contains 1, RT-08T-10 and 1,RT-08R-10) DSLR camera trigger.
This is a 433Mz radio control trigger, contains one transmitter and one receiver. It’s
working range is 300ft in open space. The system is a modulated frequency design, so it
is not subject to interference by other electro-magnetic devices. Unit has built-in time
lapse timer, so it can be programmed to capture image once a minute, an hour, and a day.
When this unit hooks up wth the IRX-8, user can have a system set-up to capture image
unattented, and of cause, it can be operated manually.
RTC-CA, CP, NA, NA1, NP, SO,PE These are the adatper cables for the receiver
RT-08R-10, which comes in only with 2.5mm jack, it requires to use with the RTC-CP, CA
for Canon remote control port or RTC-NA,Nikon D-80, RTC-NA90, for D-90 port, RTCSO, for Sony port, RTC-PE, for Pentax port. RTC adapter cable is not included on the unit.
It is a must optional cable in order to fire the specific brand of camera.
VB-1 is an accessories of IRX-8, it is designed to sense vibration. To place the
probe on a piece of plywood, a metal plate, about 1meter square in size, ( these can be
camoflaged to hide) when small aminal steps on it, the probe detects vibration and will
send out signal to the IRX-8, then it will trigger the RT-08T-10, which is a radio transmitter,
and send out the signal to the reciver, eventually fire the DSLR camera. The camera can
be far away with a telephoto lens pointing to the specific area. This is a simple path for
the imaging automation.
RTC-
(add suffix)
VB-1
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
Flat Leg stands
P.10
Professional series portable stands
The evolution has not stopped. Our new 110 flat leg series light stands have followed the green movement of 21st century.
What is our light stand has something to do with green movement? Here is the answer: our new series of professional light
stands are built to last. Instead of using breakable plastic or aluminum die-casting on locking collets, we machine them with
high density aluminum extrusion on all parts, will never break. We also designed a new kind of lever lock to enable fast and
easy to lock the column. Each column has pneumatic valve and piston, which ensures air tight cushioning when column
goes down, but no vacumn is created when pulling up. The flat, solid legs increase the stability and fold up compactly, hence
takes up less space on traveling with it. So, this is the ultimate and last light stand to keep for life time. Conservation of
energy takes part.
closed
open
sections
dia. leg spread
tubing dia
weigh (lb)
110-000-5
24.5
81
5
36
1-1/8-5/8
3.8
110-010B-4*
28.5
94
4
32
1-5/8
3.9
110-P004B-4
28.5
94
4
32
1-5/8
3.7
110-P005B-5
31
120
5
36
1-1/8-5/8
4.
110-P007B-4
35
117
4
44
1-1/8-3/4
5.
110-P009B-5
40
165
5
46
1-1/8-5/8
*autoleg stand
6
size in inches
Letter “P” means Pneumatic stand
2013 New Stand
110-000-5
As the stand legs fold upward, it can reduce the minimum size when it is closed.
All stands are with 5/8” stand spigot
1/4-20 tripod screw on top of it.
Special package kit
110-P004BK3
Contains 3 pcs. of 110-P004B-4 air cushioned stands
and one zipperless hold-all carrybag.
110-P007B-4
110-P009B-5
o
Str
ng
,
lid
so
f
le
lat
gs
.
ility
tab
s
s
se
rea
c
in
These stands are professional
series.One of the legs on those
stands is adjustable to adapt
the inclined floor, to keep
the stand upright. This
is very important if the
floor is not level, and
the heavy lamphead
is on top, stand is
fully extended.
A tilted stand
is always
dangerous.
Autoleg stand
110-F010B-4 has auto closing
stand legs when lift up from
the floor, this feature enables
user to go around in crowded
space and needs to move
around.
when put the stand
back on the floor
it will open up
again
closed
adjustable leg
closing
open
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.11
Flash honeycomb attachment
Add-on honey comb grid for portable flash units
Model# HC-345
Our add-on honeycomb grids are to add special effect to the portable electronic
flash units. Unit consists a base unit which to be attached onto the flash head
by hook and loop tape, an additional tape is to loop around the flash to keep it
more securely. The built-in panel is flipable at 45 degrees interval with click
stop. There are 3 different spot grid come with unit, use can plug in the honey
comb grid into the panel easily. There is also a separate frame to use with color
filter gel when the grid spot is removed. The attachment also can be used as
bounce flash attachment as it has a silver/white bounce board.
Folds up small for easy storage
Size: 6x9cm
Weigh:50gm
Mount: Hook and loop tape, w/ extra
band.
Material on casing: ABS Plastic.
Honey comb grid : Aluminum
Bounce board: Aluminum
Easy to attach on
Flip to bounce light, with
choice of white, or silver
deflection.
Covers most portable
flash units
Gird panel has click stiops, at 45
degree interval.
Honey comb grid
Product No.
HC-345 contains:
1 of each 30,40,50 degrees spot
grids
1 silver/white deflector
1 set of 3 color gels
1 translucent diffuser
1 removable frame for above
Set of 3 color gels plus 1 diffuser,
come with gel frame.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
Turbo Windtunnels
P.12
Windsnoot fits on windtunnel
RPM: 1400
CFM: 2880
Wattage: 145W
voltage: 120v or
220v
Fan dia.: 17”
Weight: 17lbs
Noise level: 60db/3m
Model #500/120,230
With stepless speed control,
fits on 5/8” stand spigot.
#750WS
Windsnoot
1000R
#110-500ST
air lift-assist
stand for
windtunnel
to increase
wind speed.
Comes with
mounting
clip.
weight: 6lbs
#500D/120,230
#1000RFD/120,230
Windtunnel with dolly.
Packed in one package
#1000RF/120,230
Turbo Windtunnel with RF wireless
remote control, up to 20 ft. It has auto
and manual mode. Auto mode:
switching wind speed automatically in
time frame to emulate natural wind
blowing. Manual mode: Wind speed
can be controlled by steps.
1000R Replacement RF recomote
control with digital read out.
Air-lift assist
stand
kit
contains one
2m column
with 5 legs
base,
has
lockabl wheels,
5/8”
stand
spigot is on the
top.
Shipped in
two cartons
#110-400ST
air lift-assist
stand for
windtunnel
Air-lift assist
stand
kit
contains 1.2m
column with 5
legs base, has
lockable wheels,
5/8” stand spigot
is on the top.
A gas air
spring is
built-into
the stand
column,
this enables
air lift of
the windtunnel.
Shipped in
one carton
#110-500D
Dolly with 5 lockable wheels
#110-400ST and #110-500ST have
removable center column to enable
the fan to
put on
dolly
directly.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
BeautiDish
P.13
#BES-15
snoot w/grid
40-600
BeautiDish
#BER-12
softbox
ring
weigh: 0.8kg
reflector size: 30cm
reflector finish: satin silver
flash bracket: fully adjustable
construction: all aluminum
translucent deflector: plastic
front diffuser: nylon material
#40-16X16
magic
squire
#30-342
Long extension
handle
#40-600 BeautiDish, contains:
1. Backplate/bracket, tiltable fits 5/8, 1/4, 3/8 stand
spigot or thread
2. Retaining ring to hold the 30cm relector
3. Translucent deflector w/3 springs
4. Aluminum deflector
5. 30cm main reflector
6. Fabric diffuser (sock type)
7. 1/4,3/8 adapter insert
8. 30-343 handle
our digital
barebulb
fits in directly
#30-343
Handle
w/ 1/4”
screw
2
1
3
6
5
4
7
#BHC-35 honey cone grid
40-800P 19.8”/50cm dia. BeautiDish
with Portable flash bracket
and back plate. Comes
with Honeycomb Grid, 1 silver
dish and 1 translucent
deflection dish. Tilt-able.
#30-341
Short extension
handle
40-800R 19.8”/50 cm BeautiDish
with Imager series
ring mount. Comes with
Honey comb Grid, 1 silver
and 1 translucent deflction
disc.
40-800C same as above
but with Bowen ring
mount
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
FL-Cicle T/120,230
built-in camera
flip bracket,
mount-able
on tripod.
FL-Circle V/120,230
has 4 screw to
attach on fixture.
FL-Circle M/120,230
has adjustable
mount, two
handles, with
digital camera
trigger.
P.14
FL-Circle & FL-Stripe
FL-Stripe I/120.230
FL-Stripe II/120.230
The FL-Stripe
has 2 versions,
FL-Stripe I has a
modular design,
user can joint
unit together to
have a tall and
narrow illumination light source
for imaging. It is
limitless to joint.
Also, It can be
jointed
side
way, to form a
light bank. The
casing is one
piece aluminum
extrusion for
ridgidity. Unit
contains two T5 tubes, diffuser.
barndoors and
mounting hardwares are optional.
The FL-Stripe II is a
simple unit, it can’t be
stacked together, instead, it is a single
unit, complete with
bardoors,
tilting
bracket and diffuser.
The casing is sheet
metal with tiny vent for
heat dissipation.
Power cord is same as
FL-StripeI,12ft with full
and half power switch.
Both Unit size is
47x4.5x2”. Weight is
less than 6 lbs. Ballast
is built-in but replaceable. The light produces very slim but
wide light beam, it is
best to light up background evenly in short
distance, or reproduction of paintings,(does
not generate lot of
heat) shooting reflective glass products,
shiny metal products..
etc. etc....
It is also great of low
key portait, nude photography as the light
can bring out the lines
beautifully.
PL-83BL/
120,230
FL-Circle has a twin circle fluorescent
tube, 83W, 5500K. Comes with PL83BL ballast, and 10ft power cord.
FL-Circle has metal casing, frosted
front diffuser.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.15
Magic Squares
50-601PFT
50-601PFT
Magic square, with portable flash mount.
It has removeable front and inner diffusers.
The large 24x24” box size makes it most
suitable for studio and on location work
50-501PFT
Magic SquareI, fold flat softbox,
comes with adjiustable flash
bracket, tilt-able, mounts on 5/8”
stand spigot. Comes with 1/4” ,
and 3/8” adapter, with provision
for RF flash trigger with shoe mt.
22x22 front diffuser.
50-PS
adapter ring for rib type
softbox, has 8 holes
for fiberglass ribs.
Hole: 8mm dia.
60-601RM
Magic Square, 22x22” comes with ring mount for
Imager and Calumet/Bowens flash mount. Magic
folds flat, and comes with a hall-all carry pouch.
50-501PF
Magic Square, fold flat softbox,
comes with adjiustable flash
bracket, non tilt-abled, mounts on 5/
8” stand spigot. Comes with 1/4” ,
and 3/8” adapter. Best to use with
our VH flip bracket.
50-601RM
50-401BB
Magic square for Digital Barebulb,
which is not included.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
#30-345
Handle with
built-in
tripod
BirdsEyePod
P.16
Specification
#30-390 BirdsEyePod JR
Weight: 1kg.
Min.: 70cm
Max.: 177cm
for camera not over 1.5kg.
RTC cable is not included.
3 section telescopic pole
with racheted tilt-head,
quick camera mount
on top, equipped with
remote electronic shutter
release. Designed for
new DSLR cameras
which have flip-able
LCD panel. User can
raise camera up to
10ft above ground,
and get birds-eye
view, and get
the aerial shot
without riding
on helicopter.
your height
is no longer
a limit.
30-344
3 section
handle for
iPhonPod
1/4” female
threaded
bottom
RTC-XX
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
2 in 1 LED Video light
P. 17
LED Video light designed for DSLR camera in HD movie mode
Product #HPL-4
Right now, there is a whole new game in town. People can
shoot HD video using the latest DSLR camera. There is no
hard drive, no mini tape, DVD disc whatsoever. There is no
motor to turn to record HD movie, but there is a full line of
interchangeable lenses to use on camera, and capturing
video in a tiny memory card. A big leap in videography.
Our innovative LED video light is designed for this purpose. The 5500K, bright light fits on camera’s shoe mount.
It is close to the lens to minimize the shadow. The light is
good to use over an hour. Need close-up? No problem, just
remove the LED panel from the camera, and remove the
LED module A, and plug-in module B into the battery case
frame, and mount the battery case onto the supplied bracket.
This bracket also holds the Camera, to become single unit.
User can shoot hand-held, or rmount it onto tripod for still
shot. Unlike the ring light, there is no ring size to match, the
auto focus is still free of burden as the light is not mounted
on the lens. The module B is designed for close-up or micro-photogray.
The module A fits on this camera will last for an hour. The
LED can turn half power if needed. It comes with adapter to
fit on Sony camera.
LED/Camera bracket
Battery case/LED frame
module A
module B
HPL-4 specification
With this set-up, close-up HD video is possible thanks for
the close-to-lens LED. The left and right panels can be
switched to have a 2:1 light ratio achieving 3 dimensional
lighting.
0.3W x60 LED, on module A
0.3W x30 LED, on module B
Runs on 4x AA akaline batteries or 4 x rechargableables
Running time is more than one hour on Akaline batteries
Full and half power switchable
Frame can tilt at 45 degree interval with click stop
Has standard cold shoe and one Sony adapter
Comes with LED/Camera bracket, tripod mountable
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.18
IRX-18
Infra-red flash triggering devices
Infra-Red Flash Trigger
Special designed
Infra-Red filter
On/off switch
Sync outlet
Low Voltage
hot-shoe
Test button
Ready light
The IRX-18 is a powerful flash trigger to trigger electronic flash units with built-in photo sensors. It can fire slave flash
unit up to 20 meters away. Unit has low voltage hot-shoe contact, safe for digital cameras. IRX-18 has 2.5mm
diameter sync cord outlet also, to use with P C sync cord. (20cm, included) It requires 2, AA akaline batteries. Unit’s
recycle time is one second. The special designed infra-red filter allows to trigging the flash wirelessly and the infra-red
light will not show on the film or image capture. Unit is light weight, user friendly. Weights xxxxgms. Batteries are not
included.
IRX-10 Add-on Infrared-Flash filter/bouncer
Removable
silver/white
aluminum
bounce
plate to
soften
light
Special designed
infra-red add-on filter
blocks all visible light
from flash and transmits
infra-red light to trigger
remote slave flash
units.
Hook and loop
tape to fasten unit
onto any portable
electronic flash
The IRX-10, add-on infra-red filter to absorb any visible light but transmits infra-red ligtht to trigger other electronic
flash units (must has slave sensor) The purpose of using this device is to eliminate the light from the camera position
but be able to fire slave flashes wirelessly. The dual purpose flash add-on accessory is compact, light weight, and
easy to attach onto any portable flash units. Weight 40gms. Filter size: 6x9cm ( Flash unit is not included)
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.19
Multi-purpose LED video light
HPL-3 LED panel attachment to portable flash units
OK, Digital Single Lens Reflex camera can make HD
video, what about your flash, will it light up your video
clips? The answer is-you know. Then what to do? Keep
switching gear, flash unit, video light, back and forth? No
need, with this piggyback LED panel light, you only need
to flip it over, the flash will remain flash, when you want to
have bounce light, flip the flash head 90 degrees up, and
flip the LED panel light at 45 degrees toward to the front,
voila! a bounce light.
Now, it is time for a little HD video, just flip the panel
down to cover up the flash head, you have a perfect video
light. It sounds like a Hybrid car. Yes, the LED video light
is much greener than the traditional halogen video light,
the unit runs on 4 AA akaline batteries, exactly like the
one used in the flash unit, more than one hour. So, in
case you run out one of
the sets, you can switch them for emergency
use as batteries are inter-changeable. What
about I don’t want to put the flash on, just
video? No problem, just remove the flash
from the camera, use the shoe-mount on
the unit, slide HPL-3 into the camera’s hot-shoe,
and secured by the knob, that all you need
to do, simple. By the way, There is an adapter
comes with it to fit the Sony hot shoe.
There are 60 high efficient LEDs in the panel, totally
consume only 3 watts of battery power, yet it emits almost
150 lux/m of 5600K color balanced light, of course, no
heat. This amazing gadget is a must for contemporary
photo enthusists. Who would still use the dinosaur, large,
power grizzler video light ?
This LED attachment folds up pretty compact, light
weigh. It has self-adhesive loop and hook tape to attach
onto the flash head, then a second securing band loops
around the head, to have a positive bond to the flash unit.
The other side of the panel has a white reflective material
decal to use as bounce board for flash. It also has a
switch to cut down the light in half. The front panel has
slots to use with color cut-film or gel. The panel has click
stop for angles to meet the need. The weigh of the unit is
only 220 gms without battery. The conclusion is....you
must have one!
size: 7.5x11cm
weigh: 220gm
power: 1.5,3w, selectable
lumen: 150/m
color: 5600K
batteries: 4xAA or
rechargeable Ni-mh
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.20
HPL-70 Studio LED light
The HPL-70
Studio LED Light utilizes the latest 1W high power LED to form the heart of the light. There are 70 pcs of
them in it , hence 70W, produces 1200 Lux/m. Due to its mighty power, there are two quiet fans are being
used inside the lamp to prolong the semi-conductors’ life. It has built-in 4 leaf barndoors, full,half power
switch. The case is constructed by mild steel sheet metal with lots of vent hole. The unit has receptacle for
photo umberella. We have incorporates a front diffuser to diffuse the light to have a even illumination.
The life is 50000 hours, total weight is 3.5kg. size is 30x30cm. unit fits onto 16mm spigot. It runs on 120 to
230 VAC.
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
Motorized backdrop system
P.21
Motorized background paper hanger system
200-300, 1 pair of free standing BG support, air lifted/cusioned, holds 4 rolls, designed
to be in studio where ceiling, wall mount is not possilbe. Each stand has hand pump to
increase pressure inside column, to counter-balance the weight when lifting up the
load. Max. 3m tall. Cossbars and paper rolls are not included, but does come with
crossbar to link between 2 stands.
200-P2014BM/L/120,230
is a portable stand set,
comes with two 4m aircushioned
stands,
includes a 3 sections, 3m
motorized crossbar. The
crossbar, has built-in
powerful ac motor with
manual, in-line rocker
switch to roll/unroll
background paper or
muslin backdrop material
for effortless set-up.
It opens to 4m tall, black
color, in addition, it has a
steel tube to use as paper
weight, keep paper from
curling up, also it has two
bubble level to check the
levelness of background
paper, comes with hold-all
carrybag.
fold and tape the edge of paper, to form a pocket, then insert the steel tube to act as paper weight
200-200MR, 3m motorized crossbar for 2.7m roll paper with in-line rocker switch.
200-200MRC, same as above but with 10 channel RF remote control.
Manual rocker switch
10 channel RF remote
control. Controls up to 10
rollers
comes with 20-BGW paper counter-weight
200-2014SM/S/120,230
same as above, except it
is 3m tall, silver color, non
air-cushioned.
powerful
brushless
motor built
into crossbar
200-407, 3.2m airspring pole
200-408, 4.2m airspring pole
200-200MR/120,230
3m motorized crossbar in 3
section, rocker switch.
200-200MRC/120,230
3m motorized crossbar in 3
secetion, RF remote control
Air-spring
pole
200-200M1
1m middle extension only
above motorized crossbars
are able to mount on 5/8”
stand spigot directly
20-403 pair 3 roller hook
20-405 pair 5 roller hook
can be mounted on wall, or
use 200-011
mounting clamps
crossbar joints
together without
tools
paper weight has
spirit level
for horizontal
adjustment
120
230
200-011 set of 4 mounting
clamps for roller hooks to
mount on pair of air-lifted
pole.
200-P2014BM/L/120 ,230
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P. 22
Background paper counter-weight
Background paper counter-weight Product #20-BGW
The backgound paper counter-weight is to keep the paper flat when the roll paper is hanging on
ceiling or mounted onto portable background stands. Also, when the paper is fully unrolled onto the
floor, it is normaly curling up. User needs to put some paper weight to keep it flat on the floor. With this
counter-weight, all the paper curling up problem is gone. The 3 section 3/8” steel rod is spring loaded
for easy to assemble, It is also supplied with two bubble level vials to put at both end, this enables
user can check if the roll paper is properly leveled.
The unit is supplied with double side tape, and paper sealing tape, and a small sponge to wet the
tape. Once the counter-weight is installed, it is recommanded the weight is to stay with the paper
permantly. For a 36ft standard background paper, user may need to redo the whole process as the
floor section may be worn out and full of marks due to models foot print. User needs to cut off the dirty
section and re do the paper end edge.
To assemble
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.23
DSLR FloPod #30-500
FloPod, Quick zoom ring
The DSLR FloPod is designed to make HD video in mind.
Due to the evolution of present DSLR cameras, they are
able to deliver high quality video, are a lot cheaper than
use the semi-pro HD video camera.
As the camera is much lighter and easier to handle, more
and more people discover its marvels.
We have come up with 2 products for the need. The 30500 is a camera bracket, holds a DSLR camera, but it floats
on 2 axis. The weight of the camera keeps the frame horizontal, after the alignment, and the x and y axis adjustment. There are two large handles with drag control. The
unit has video light shoe mount on top of the bracket, and
quick release camera mount at the bottom. It is built by
light weight aluminum, black anodized for durability. The
whole unit is easy to put together.
30-500 DSLR FloPod
Basic version, for DSLR camera with video
capability. Camera remains horizontal as the
camera hangs on a yoke, which has drag control. This will have smooth movement when
user hands on the bracket and moves around.
Comes with shoemount, camera quick release
plate.
Includes
Quick zoom ring 50-70mm
diameter range
Optonal accessories
#QR-0102K set of two
Quick Zoom Ring kit,
Contain1x QR-01 50-70mm and
1X QR-02 60-100mm
1/2 lb counter
weight
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com
TRISTAR
P.24
Fast Bracket
Electronic FAST flash bracket,
FAST bracket, no flip, just rotate camera!
We produce flash bracket to a new level, a bracket won’t change the way you hold the camera. There is no extra handle, no
mechanism to flip in order to keep the flash on top of lens. When you change camera from horizontal to vertical format, there
is always a flash above the lens, to produce the exact light coverage and have the light always on top of lens. This bracket
is designed for professional DSLR camera with TTL functions.
BK-8/CA,NI
BK-8/CA
What this FAST bracket can do for you?
1. Always give you light above lens to minimze harsh shadow, only one flash blinks.
2. You can hold the camera as it is designed for.
3. You get double the battery usage time as you have now two flashes.
4. Can be hooked- up to a radio tranmitter to fire remote flash, as it has a PC outlet.
5. Everything is done automatically, no switch to flip, requires no attention.
7. Available for Canon, Nikon,Olympus, Pentax and Sony Digital SLR cameras.
8. Fully adjustable for short, tall flash unit to align with lens.
9. Use 2xAAA batteries, easy to replace.
10. TTL hot shoe is tiltable.
11. Light weight, only 300gm.
Optional accessories:
RT-07K-16
Optional Accessories
RT-07K-16
16 channel radio flash trigger, range 100m with LED readout,
this flash trigger has a small tranmitter to be piggy back on top
of the flash to fire the remote flash units.
Radio transmitter piggy
back on top of flash
unit by Velcro tape
Tristar Photo Industrial Company 11 Lung Tak St. 24/F. # 7 Tsuen Wan Hongkong
Ph. 2408 6079 Fax. 2409 9408 Email: triphoto@biznetvigator.net WWW. tristar-photo.com