SUPPLEMENT
Catalogue Supplement
Featuring...
2-5
6-10
Sevylor Kayaks & Accessories
Coleman Coolboxes, Torches, Headlamps,
Dry Gear Bags & Campingaz Stove
11-13
Besto Buoyancy Aids, Challenger Lifejackets
14-18
Devocean Life Vests, Combo Skis,
Kneeboards, Wakeboards & Towables
19
TREM Anchor Connectors, Glovebox,
Boarding Ladder, Lifebuoys & Navigation Lights
20-21
CAN-SB Lifebuoys, Hatches, Storage Boxes,
Transom Drain Sockets & Caps & Expanding Plugs
21-22
Attwood Ski Mirror, Dometic Starlight Cooker,
Propeller Bags, Fishing Rod Holders
23
Ritchie Compasses
24-25
Canopy Fasteners
26-27
Marinco/Nicro Ventilation & Marinco Spot Lights
28-33
Marinco/AFI Horns, Wiper Motors, Blades & Arms
34-46
Shakespeare Antennas, Dockline & Fuel Additives
47-50
Riptide Cleaning Products &
Polymarine Inflatable Boat & Rib Care
51
Weaver Snap Davits
52-53
International Cleaning Products,
Professional Antifouling, Bilgex & Intertuf
54-55
Loctite Sealants & Adhesives, Geocel Sealant
Captain Tolley’s Creeping Crack Cure
56-59
Quicksilver Oils & Lubricants
60-61
Ultraflex M90 Rotary Cable Steering
& GoTech™ Hydraulic Outboard Steering Systems
62
Fuel-Guard Decontaminator,
CAN-SB Jerry Cans & Anti-syphon Lock Valve
63
Guidi Alex Valves & Long Bronze Skin Fittings,
Swing Check Valve
64-65
Propane Regulator, Gas Checker Pen
Johnson Pump Pumps, Radial Blower & Grey Water Tank
66
Whale Pump Accumulator Kit
67
Morsø Swift Solid Fuel Stove
68-73
Mastervolt Mass Combi Ultra & Inverter Chargers,
Comfort System , Alpha Alternator Kits & Regulators,
EasyCharge Battery Chargers. Battery Boxes
74-78
Marinco/BEP Pro Installer Series Battery Switches
Busbars, Fuse Holders, Insulated Studs & Link Bars
79-80
Blue Sea Dual USB Chargers, Blade Fuse
Blocks & Busbars
81-84
Lewmar 110TT Thruster,
CRW400 & CPX Windlasses, HTX Blocks
Six Depots Nationwide
Aquafax Limited, 1 Dencora Way, Sundon Business Park, Luton, Beds LU3 3HP
Aquafax Ltd. (Hamble), 1-2 Mitchell Point, Ensign Business Park, Hamble, Southampton SO31 4RF
Aquafax Ltd. (Plymouth), Unit 5 Plymouth Trade Park, 22 Macadam Road, Plymouth PL4 0RU
Aquafax Ltd. (Middlewich), Unit 11, Valley Court, Sanderson Way, Middlewich, Cheshire CW10 0GF
Aquafax Ltd. (Wroxham), Unit 31, Stalham Road Ind. Estate, Littlewood Lane, Hoveton, Norfolk NR12 8DZ
Aquafax Ltd. (Glasgow), 103-105 Barrie Road, Hillington Park, Glasgow G52 4PX
E-mail: sales@aquafax.co.uk
Website: www.aquafax.co.uk
Tel:(01582) 568700
Tel:(023) 80457206
Tel:(01752) 669944
Tel:(01606) 841111
Tel:(01603) 781881
Tel: (0141) 8827511
Fax:(01582) 568720
Fax:(023) 80457208
Fax:(01752) 667764
Fax:(01606) 841188
Fax:(01603) 781981
Fax: (0141) 8835111
CATALOGUE SUPPLEMENT - I
Sevylor Inflatable
Kayaks & Accessories
GENERAL BOAT EQUIPMENT - KAYAKS
NEW RANGE
RIVIERA™ KAYAK
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
Ideal to enjoy adventures and leisure times on the water with friends and family.
With a light weight construction the Riviera is ideal for your very first kayak
adventures and comes complete with aluminium paddle
6-33000
312 x 92cm
2
1
180kg
3
8.4kg
TAHITI™ PLUS KAYAK
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for
easy inflation and deflation
• Sevytest™ to check pressure easily during inflation
• Highly effective drainage system
• Integrated spray deck at bow and stern
• Backpack System for easy storage and transportation
• 2 removable inflatable seats
• 2 ergonomic carry handles for easy transportation
Includes: paddle, Sevytest, repair kit and owners manual.
Optional: Direction skeg Part No. 6-33010 (page 5)
A timeless classic, the Tahiti Plus comes with an extra seat providing enough space for 2 adults and 1 child.
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for
easy inflation and deflation
• Sevytest™ to check pressure easily during inflation
• Highly effective drainage system
• Integrated spray deck at bow and stern
• Backpack System for easy storage and transportation
• 3 adjustable, removable, inflatable PVC seats
• 2 ergonomic carry handles for easy transportation
6-33001
361 x 90cm
2
1
200kg
3
11.7kg
Includes: Sevytest, repair kit and owners manual.
Optional: Direction skeg Part No. 6-33010 (page 5)
ADVENTURE™ & ADVENTURE™ KIT CANOES
Classic canoes that encourage fun, exploration and family adventure.
The high sided hull creates comfort and protection while on the water.
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for
easy inflation and deflation
• Manometer: check pressure easily during inflation
• 2 fabric covered adjustable, removable, inflatable seats
• Removable fin for excellent manoeuvrability
• 2 ergonomic carry handles for easy transportation
Specifications
Part No. (Adventure™):
Part No. (Adventure™ Kit):
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
2
6-33002
6-33003
314 x 88cm
2
0
165kg
3
11.5kg
Adventure Canoe Includes: carry bag, manometer, removable fin, repair kit and owners manual.
Adventure Canoe Kit includes all of the above plus foot pump and paddles.
Removable
Fin
ADVENTURE™
CANOE KIT
Manometer
(see page 5)
CATALOGUE SUPPLEMENT - I
Sevylor Inflatable
Kayaks & Accessories
GENERAL BOAT EQUIPMENT - KAYAKS
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
The Adventure Plus has the same high hull design as the
adventure but is longer to accommodate an additional central
childs seat and extra storage capacity.
6-33004
368 x 86cm
2
1
200kg
3
15.2kg
Removable
Fin
Manometer
(see page 5)
COLORADO™ & COLORADO™ KIT KAYAKS
Specifications
Part No. (Colorado™):
Part No. (Colorado™ Kit):
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
6-33005
6-33006
331 x 88cm
2
0
200kg
3
14.7kg
Colorado Kayak includes: carry bag, manometer,
removable fin, repair kit and owners manual.
Colorado Kayak Kit includes all of the above plus
foot pump and paddles
HUDSON™ KAYAK
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
NEW RANGE
ADVENTURE™ PLUS CANOE
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for
easy inflation and deflation
• Manometer: check pressure easily during inflation
• Integrated spray deck at bow and stern with bungee
cords for securing cargo
• 3 fabric covered adjustable, removable, inflatable seats
• Removable fin for excellent manoeuvrability
• 2 ergonomic carry handles for easy transportation
Includes: carry bag, manometer, removable fin,
repair kit and owners manual
Combining a mix of manoeuvrability, stability and comfort, The Colorado
features the easy inflation manometer to allow inflation to the correct pressure.
Removable
Fin
Manometer
(see page 5)
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for
easy inflation and deflation
• Manometer: check pressure easily during inflation
• Highly effective drainage system
• 2 fabric covered, adjustable seats with high backrest
and inflatable sitting area
• Removable seats - easily turn the kayak into a 2 or
1-person version
• Removable fin and welded directional strakes for
excellent manoeuvrability
• 4 ergonomic carry handles for easy transportation
COLORADO™
KAYAK KIT
Roomy and comfortable, the Hudson is perfect for a family day out, touring along sheltered coastline or on inland
waterways. This sporty kayak not only looks good but also offers great performance, stability and comfort.
6-33007
374 x 89cm
2
1
210kg
3
17.7kg
Removable
Fin
Manometer
(see page 5)
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for easy
inflation and deflation
• Manometer: check pressure easily during inflation
• Highly effective drainage system
• Integrated spray deck at bow and stern
• 3 fabric covered, adjustable seats with high backrest and
inflatable sitting area
• Removable seats - easily turn the kayak into a 1-person version
• Removable fin and welded directional strakes for excellent
manoeuvrability
• 4 ergonomic carry handles for easy transportation
Includes: carry bag, manometer, removable fin, repair
kit and owners manual
CATALOGUE SUPPLEMENT - I
3
Sevylor Inflatable
Kayaks & Accessories
GENERAL BOAT EQUIPMENT - KAYAKS
NEW RANGE
The Pointer has a sharp bow and stern and a flat bottomed construction making it both a stable and comfortable
design, ideal for sea touring and suitable for beginners as well as experienced kayakers. Directional strakes and
removable fins add to its manoeuvrability.
Pointer K1 Features
POINTER™ K1 KAYAK
• Ideal width and pointed shape offering excellent
Manometer
performance
(see page 5)
• ABS plates at bow and stern for increased rigidity
• Boston, Mini Boston and Mini Double Lock valves for easy
inflation and deflation
• Manometer: check pressure easily during inflation
• Highly effective drainage system
• Integrated, large spray deck at bow and stern with bungee
cords for securing cargo
Specifications
• Large, water-protected storage area underneath stern
Removable
Part No.:
6-33011
spray deck
Fin
Size Inflated:
314 x 81cm
• Spray skirt offering additional protection from water
Max Adult Capacity:
1
• 1 fabric covered adjustable, removable seat with high
Max Child Capacity:
0
backrest and inflatable sitting area
Spray
Skirt
Max Load Capacity:
95kg
•
1 adjustable, removable foot rest for increased performance
No. of inflatable chambers: 3
•
Removable fin and welded directional strakes for excellent
Weight:
13.3kg
manoeuvrability
Includes: carry bag, manometer, removable fin,
• 4 ergonomic carry handles for easy transportation
spray skirt, repair kit and owners manual
POINTER™ K2 KAYAK
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
Manometer
(see page 5)
6-33012
440 x 85cm
2
0
180kg
3
13.3kg
Removable
Fin
Spray Decks
Spray Skirts
Pointer K2 Features
• Ideal width and pointed shape offering excellent
performance
• ABS plates at bow and stern for increased rigidity
• Boston, Mini Boston and Mini Double Lock valves for easy
inflation and deflation
• Manometer: check pressure easily during inflation
• Highly effective drainage system
• Integrated, large spray deck at bow and stern with bungee
cords for securing cargo
• Large, water-protected storage area underneath stern
spray deck
• 1-person and 2-person zip-in spray covers and 2 spray
skirts offering additional protection from water
• 2 fabric covered, adjustable seats with high backrest and
inflatable sitting area
• Removable seats - easily turn the kayak into a
1-person version
• 2 adjustable, removable foot rests for increased
performance
• Removable fin and welded directional strakes for excellent
manoeuvrability
• 4 ergonomic carry handles for easy transportation
Includes: carry bag, manometer, removable fin, 2 x
spray skirt, 1 x two person spray deck, 1 x person
spray deck, repair kit and owners manual.
4
CATALOGUE SUPPLEMENT - I
Sevylor Inflatable
Kayaks & Accessories
GENERAL BOAT EQUIPMENT - KAYAKS
The Yukon is ideal for long excursions, whether overnight or for several days and
has been developed with comfort and practicality in mind. The kayak configuration
offers better protection from water and both seats and footrests can be adjusted for
optimum fit. There's plenty of storage including cargo nets and a large storage bag.
Specifications
Part No.:
Size Inflated:
Max Adult Capacity:
Max Child Capacity:
Max Load Capacity:
No. of inflatable chambers:
Weight:
• Broad shape offering excellent stability
• Boston, Mini Boston and Mini Double Lock valves for easy
inflation and deflation
• Manometer: check pressure easily during inflation
• Highly effective drainage system
• Integrated spray deck at bow and stern and splash guard
• Mesh pocket, water resistant pocket and bungee cords for
securing cargo
• 2 fabric covered, adjustable seats with high backrest and
inflatable sitting area
• Removable seats easily turn the kayak into a 1-person version
• 2 adjustable, removable foot rests for increased performance
• Removable, large storage bag
• Large neoprene paddling guards along the side chambers to
prevent chaffing
• Removable fin and welded on directional strakes for excellent
manoeuvrability
• 2 ergonomic carry handles for easy transportation
6-33008
382 x 98cm
2
0
210kg
3
15.3kg
Removable Fin
Manometer
(see below)
Includes: backpack carry bag, manometer,
removable fin, repair kit and owners manual
QUICK CARRY BAG
DETACHABLE SKEG
• Fits all Sevylor kayaks and canoes
• Comfortable, padded, adjustable shoulder straps
• Mesh on both sides for optimal ventilation
• Adjustable hood with snap buckle
• Adjustable inner compression straps
• Large zipper to open bag completely and
easily place kayak/canoe inside
• 2 side pockets for paddles and pump
• Size: 90 x 44 x 33cm
Front
Part 6-33009
Attachable skeg for Tahiti
and Riviera ranges.
Part No. 6-33010
®
DUAL ACTION
HAND PUMP
• Double Action Hand Pump for
inflating with both up and
down strokes while pumping
• Dual function pump: inflates
and deflates
• Volume: 2 x 2 litres
• Head pressure: 1000 mBar /
14.5 PSI
• Long, flexible hose and
multiple adapters included
• Dimensions: 46 x 22cm
Part 6-33016
MANOMETER 700mbar
Pressure Gauge for easy inflation to
correct tube pressure. Allows check up
to 700mbar (10psi) Part No. 6-33013
2 SECTION PADDLE
Back
HIGH PRESSURE AIR COMPRESSOR
• Powerful compressor type pump for inflating any
type of kayak or SUP
• Usable on any 12V DC outlet typically found in cars
and motor boats
• Integrated pressure selector for PSI, Bar and kPa:
switches pump off when the pre-selected pressure
is reached
• Hose with attached high-pressure (Halkey Roberts)
valve adapter included
• Hose with multiple low-pressure valve adapters
included (for Boston, Mini Boston, Double Lock and
Mini Double Lock valves)
• Dimensions: 20 x 19 cm • Airflow: 190L per minute
• Head pressure:
1030 mBar / 15 PSI
Part 6-33017
NEW RANGE
YUKON™ KAYAK
• Multiple feather settings
• Spoon-shaped fibreglass and reinforced
polypropylene blades
• Special aluminium shaft
• Cold weather grip with blade indicator
• 2 drip rings
• Dimensions: L: 230 x W: 18cm Weight: 1.8kg
Part 6-33014
COMPACT KAYAK PADDLE /
TWO CANOE PADDLE
• Kayak paddle (2.15m)
• Converts into 2 canoe paddles (2 x 1.50m)
• Aluminium shaft and polypropylene blades
Dimensions:
1 x Kayak Paddle: L: 215cm Weight: 1.8kg
2 x Canoe Paddles L: 150cm Weight: 0.9kg
Part 6-33015
Split into 2 canoe paddles
CATALOGUE SUPPLEMENT - I
5
Coleman Coolers
GENERAL BOAT EQUIPMENT - COOLERS
NEW RANGE
COLEMAN XTREME® COOLERS
Designed with premium insulation technology; keeping the contents cold for days, these coolers are
perfect for long road trips, days spent boating, on a campsite, or even sporting events. As an added
feature, the lids can be used as a seat (up to 113kg).
26L XTREME® COOLER
33L XTREME® COOLER
47L XTREME® WHEELED COOLER
Part No. 6-60300
Part No. 6-60301
Part No. 6-60302
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
Cooling
Performance:
Dimensions:
Weight:
36 Cans (0.33L)
26 Litres
Robust lid, 2L height, cup
holders, easy-clean top
3 days ice
Internal: 38 x 25 x 31cm
External: 46 x 33 x 40cm
2.7 kg
Cooling
Performance:
Dimensions:
Weight:
46 Cans (0.33L)
33 Litres
Hinged lid, 4 beverage holders.
Rustproof, leak-resistant drain,
2-way handles for easy lifting
and carrying
4 days ice
Internal: 41 x 24 x 27cm
External: 57 x 37 x 37cm
3.4 kg
Weight:
66L XTREME® COOLER
91L XTREME® COOLER
Part No. 6-60303
Part No. 6-60304
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
100 Cans (0.33L)
66 Litres
Robust lid, cup holders, comfort handles,
easy-clean top
Cooling Performance: 5 days ice
Dimensions:
Internal: 61 x 30 x 33cm
External: 72 x 40 x 44cm
Weight:
6.1 kg
CATALOGUE SUPPLEMENT - I
Internal: 45 x 33 x 33cm
External: 58 x 44 x 46cm
5.9 kg
130 Cans (0.33L)
91 Litres
Hinged lid. 4 cup holders. Rustproof,
leak-resistant drain, 2-way handles for easier
lifting and carrying.
Cooling Performance: 5 days ice
Dimensions:
Weight:
6
Cooling
Performance:
Dimensions:
84 Cans (0.33L)
47 Litres
Robust lid, telescopic handle,
durable wheels, easy-clean top
5 days ice
Internal: 79 x 33 x 29cm
External: 92 x 42 x 44cm
7.4 kg
Coleman Coolers &
Campingaz Stove
GENERAL BOAT EQUIPMENT - COOLERS & STOVE
NEW RANGE
COLEMAN XTREME® MARINE COOLERS
A must-have for fishermen, Coleman® Xtreme® Marine Coolers are designed specifically for use in the hot
sun. UVGuard™ reflective colour additives protect the cooler, fighting against yellow discolouration and
cracking caused by sun exposure. Combined with the Coleman Xtreme® cooling qualities, these coolers
are perfect for sport, fishing, or a day on the beach.
66L XTREME® MARINE COOLER
Part No. 6-60305
47L XTREME® MARINE WHEELED
COOLER Part No. 6-60306
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
Specification:
Holds:
Capacity:
Features:
26L XTREME® MARINE COOLER
Cooling
Performance:
Dimensions:
Weight:
36 Cans (0.33L)
26 Litres
Robust lid, antimicrobial
protection, stainless steel
hardware, UV blocker
3 days ice
Internal: 38 x 25 x 31cm
External: 46 x 33 x 40cm
2.7 kg
Cooling
Performance:
Dimensions:
Weight:
84 Cans (0.33L)
47 Litres
Antimicrobial protection,
telescopic handle, durable
wheels, UV blocker
5 days ice
Internal: 45 x 33 x 33cm
External: 58 x 44 x 46cm
5.9 kg
Part No. 6-60307
Cooling
Performance:
Dimensions:
Weight:
100 Cans (0.33L)
66 Litres
Robust lid, antimicrobial
protection, stainless steel
hardware, UV blocker
5 days ice
Internal: 61 x 30 x 33cm
External: 72 x 40 x 44cm
6.1 kg
CAMPINGAZ® CAMP'BISTRO® STOVE
User-friendly, compact and portable this single burner stove is powerful, cordless
and has precise power adjustment for ease of use.
• Gas cartridge safety locking system
• Enamelled pan support for easy cleaning
• Hard plastic carry case included
• Built-in piezo burner ignition
• 2300W Power
• Uses Campingaz® CP250 cartridges
(Part no. 6-01343)
• Boil time: 6 mins
• Running time: 1h 15 mins on 1 x CP250
• Dimensions: 33 x 28 x 9cm
• Weight: 2.3kg
Part No. 6-01300
For Coleman Esky™ Series Coolers see next page >>>
CATALOGUE SUPPLEMENT - I
7
Coleman Coolers
GENERAL BOAT EQUIPMENT - COOLERS
NEW RANGE
COLEMAN ESKY™ SERIES COOLERS
A thick, all-round insulation and a tight-fitting lid gasket retain ice for days longer than a regular cooler. Esky
coolers have integrated hinges with stainless steel pins and recessed catch-free latches. An antimicrobial liner is
housed inside a strong durable shell. Tie down points allow the cooler to be secured while leaving the lid free to open and close.
ESKY™ SERIES 52L COOLER
ESKY™ SERIES 80L COOLER
Part No. 6-60320
Part No. 6-60321
Specification:
Capacity:
Insulation:
Specification:
Capacity:
Insulation:
ESKY™ SERIES 127L COOLER
ESKY™ SERIES 194L COOLER
Part No. 6-60322
Part No. 6-60323
Specification:
Capacity:
Insulation:
Specification:
Capacity:
Insulation:
52 Litres
Lid and bottom insulation 6.4cm,
side insulation 5.1cm
Features:
Antimicrobial additive, UV inhibitor, airflow
barrier with gasket seal, recessed catch-free
rubber latches, dual drains, rope handles with
soft grips, integrated cutting board, dry-storage
basket, lockslot and tie-down points
Cooling Performance: 7 days ice
Dimensions:
Internal: 43 x 27 x 34cm
External: 70 x 50 x 50cm
Weight:
13.2 kg
127.8 Litres
Lid and bottom insulation 6.4cm,
side insulation 5.1cm
Features:
Antimicrobial additive, UV inhibitor, airflow
barrier with gasket seal, recessed catch-free
rubber latches, dual drains, rope handles with
soft grips, integrated cutting board, dry-storage
basket, lockslot and tie-down points
Cooling Performance: 10 days ice
Dimensions:
Internal: 66 x 39 x 40cm
External: 93 x 61 x 56cm
Weight:
22.7 kg
8
CATALOGUE SUPPLEMENT - I
80.4 Litres
Lid and bottom insulation 6.4cm,
side insulation 5.1cm
Features:
Antimicrobial additive, UV inhibitor, airflow
barrier with gasket seal, recessed catch-free
rubber latches, dual drains, rope handles with
soft grips, integrated cutting board, dry-storage
basket, lockslot and tie-down points
Cooling Performance: 7 days ice
Dimensions:
Internal: 56 x 27 x 40cm
External: 83 x 49 x 55cm
Weight:
19.1 kg
194 Litres
Lid and bottom insulation 6.4cm,
side insulation 5.1cm
Features:
Antimicrobial additive, UV inhibitor, airflow
barrier with gasket seal, recessed catch-free
rubber latches, dual drains, rope handles with
soft grips, integrated cutting board, dry-storage
basket, lockslot and tie-down points
Cooling Performance: 11 days ice
Dimensions:
Internal: 98 x 39 x 42cm
External: 125 x 61 x 58cm
Weight:
34.5 kg
Coleman Flashlights
& Headlamps
GENERAL BOAT EQUIPMENT - FLASHLIGHTS
Tough, lightweight, compact and water resistant. With impressive beam
distances and high lumens, the built-in LED’s give a much longer runtime.
CT MINI LED FLASHLIGHT
CT 2 LED FLASHLIGHT
CT 9 LED FLASHLIGHT
Part No. 6-11800
Part No. 6-11801
Part No. 6-11802
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
75 Lumens
55 metres
20 minutes
1 x AAA Duracell®
batteries included
IPX4 water resistant
8cm
43g
CT11 LED FLASHLIGHT
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
NEW RANGE
COLEMAN CT
FLASHLIGHT RANGE
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
20 Lumens
25 metres
35 hours
3 x AAA Duracell®
batteries included
IPX4 water resistant
anodized aluminium body
11 x 3cm Ø
86g
Part No. 6-11803
110 Lumens
90 metres
2 hours
2 x AA Duracell® batteries included
IPX4 water resistant anodized aluminium body
15.1 x 2.7cm Ø
113g
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
CT20 LED FLASHLIGHT
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
90 Lumens
50 metres
6.5 hours
3 x AAA Duracell®
batteries included
IPX4 water resistant
anodized aluminium body
12.2 x 3cm Ø
95g
Part No. 6-11804
200 Lumens (high) / 70 Lumens (low)
100 metres (high) / 60 metres (low)
2 hours (high) / 3.5 hours (low)
2 x AA Duracell® batteries included
IPX4 water resistant anodized aluminium body
with high / low modes
15.3 x 2.7cm Ø
118g
COLEMAN CHT HEADLAMPS
Coleman CHT headlamps are equipped with a pivoting head allowing the lamp to be rotated to suit your direction preference. All headlamps
have various light modes, come complete with batteries and have an adjustable head band.
CHT4 LED HEADLAMP
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
Part No. 6-11805
40 bright lumens on high, 23 lumens on low setting
32 metres beam distance on high, 24 metres on low
20 hours on high, 35 hours on low
Operates on 2 x AAA batteries (included)
3 modes (high, low, red), pivoting head, strap-key used for
quick battery changes
5.2 x 4 x 2.8cm. 60cm Ø headband
85g with battery
CHT7 LED HEADLAMP
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
Part No. 6-11806
70 bright lumens on high, 30 lumens on low setting
50 metres beam distance on high, 30 metres on low
9 hours runtime on high, 25 hours on low
Operates on 3 x AAA batteries (included)
4 modes (high, medium, low, red), pivoting head, strap-key
used for quick battery changes
6.8 x 4.7 x 3.7cm 60cm Ø headband
135g with battery
CATALOGUE SUPPLEMENT - I
9
Coleman Headlamps
& Dry Gear Bags
GENERAL BOAT EQUIPMENT - HEADLAMPS
NEW RANGE
COLEMAN CHT HEADLAMPS continued...
CHT10 LED HEADLAMP
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
Part No. 6-11807
100 bright lumens on high, 30 lumens on low setting
54 metres beam distance on high, 28 metres on low
7 hours runtime on high, 26 hours on low
Operates on 3 x AAA batteries (included)
5 modes (extra bright, high, medium, low, red), pivoting
head, easy-open battery door with strap-key for quick
battery changes.
IPX7 Waterproof: up to 30 minutes in 3ft of water
6.8 x 4.7 x 3.7cm. 60cm Ø headband
135g with battery
CHT15 LED HEADLAMP
Specifications:
Light Output:
Beam Distance:
Runtime:
Batteries:
Features:
Size:
Weight:
Part No. 6-11808
150 bright lumens on high, 35 lumens on low setting
55 metres beam distance on high, 27 metres on low
6 hours runtime on high, 27 hours on low
Operates on 3 x AAA batteries (included)
7 modes (extra-bright, high, medium, low, strobe,
red, blue), pivoting head, easy-open battery door with
strap-key for quick battery changes.
IPX7 Waterproof: up to 30 minutes in 3ft of water
6.8 x 4.7 x 3.7cm 60cm Ø headband
135g with battery
GENERAL BOAT EQUIPMENT - DRY GEAR BAGS
SMALL DRY GEAR BAG
MEDIUM DRY GEAR BAG
LARGE DRY GEAR BAG
Size: 201⁄2 '' x 101⁄2 '' (520 x 266mm)
Part No. 6-22850
Size: 23'' x 121⁄2 '' (584 x 317mm)
Part No. 6-22851
Size: 241⁄2 '' x 15'' (622 x 381mm)
Part No. 6-22852
For Devocean Watersports Equipment see pages 14 -18
10
CATALOGUE SUPPLEMENT - I
Besto Buoyancy Aids
GENERAL BOAT EQUIPMENT - BUOYANCY AIDS
NEW RANGE
BESTO FOAM
BUOYANCY AIDS
The front panels of these
highly comfortable buoyancy
aids are designed as separate sections to ensure
exceptional body comfort and are suitable for
both sexes. They feature top, waist and bottom
fastening to ensure a close body fit, and to
enhance body comfort and safety.
All sizes are designed with Fluorescent Orange
High Visibility outer fabrics, signalling whistle and
reflective applications for quick recognition and
rapid rescuing in case of an emergency. The
jackets are provided with crotch straps to prevent
the buoyancy aid from creeping up.
Specifications
• Separate filling compartments in front panels
for extra comfort
• 100% Polyester high visible fabric EN471
• Attachment strap included (baby size only)
• Crotch strap included
• PE foam filling
• Conforms to CE EN395 / ISO12402-4
Child & Junior
Part No.
6-30350
6-30351
6-30352
6-30353
6-30354
6-30355
6-30356
6-30357
Description
Besto Foam Buoyancy Aid 100N Baby
Besto Foam Buoyancy Aid 100N Toddler
Besto Foam Buoyancy Aid 100N Child
Besto Foam Buoyancy Aid 100N Junior
Besto Foam Buoyancy Aid 100N Small Adult
Besto Foam Buoyancy Aid 100N Medium Adult
Besto Foam Buoyancy Aid 100N Large Adult
Besto Foam Buoyancy Aid 100N Ex Large Adult
Baby & Toddler
Weight
Range
5-15kg
15-20kg
20-30kg
30-40kg
40-60kg
60-70kg
70kg+
70kg++
Min Required
Buoyancy
30N
35N
40N
50N
70N
80N
100N
100N
DOG BUOYANCY AIDS
This buoyancy aid is specially designed for the safety of man's best friend. Your dog will be
easily seen thanks to the high visibility fabric used in the design of this special dog vest.
Consisting of a cover filled with light PE foam filling, fitted with dual ventral belts and a single
collar belt with buckles that are both easy to adjust and close, this vest will not impair your
dog's freedom of movement.
D-shaped rings fitted on the top of the cover allow easy attachment of a leash, and a strong
lifeline attached to the top of the vest makes it easy to quickly pull the animal out of the water.
The vest will also protect your dog against the cold.
Part No.
6-30360
6-30361
6-30362
6-30363
6-30364
Description
Besto Dog Buoyancy Aid - Extra Small
Besto Dog Buoyancy Aid - Small
Besto Dog Buoyancy Aid - Medium
Besto Dog Buoyancy Aid - Large
Besto Dog Buoyancy Aid - Extra Large
Weight Range
0-4kg
4-8kg
8-15kg
15-40kg
40kg+
For More Boat Safety Products
see our Section 6 Catalogue
CATALOGUE SUPPLEMENT - I
11
Challenger Lifejackets
BOAT SAFETY - LIFEJACKETS
Our new range of Challenger and Challenger Aqua-Pro life jackets are manufactured in the UK and provide comfortable and
reliable personal safety for leisure, professional and commercial requirements. Manufactured to the highest standards, the
Challenger range are fully CE approved to ISO 12402. All life jackets have safety yellow colour when inflated.
6-30250
6-30251
6-30255
6-30254
CHALLENGER LIFE JACKETS
• SOLAS retroreflective tape to allow light to be reflected back to source in
the dark or poor visibility conditions
• Choice of manual or automatic with manual override inflation systems
• Oral top-up tube and deflation key included
• Approved emergency whistle, strong lifting loop and strong synthetic
harness webbing included
• Suitable for adults over 50kg up to 55'' (140cm) chest
• Choice of heavy duty plastic buckle or stainless steel buckle and deck harness
options 150N buoyancy
• Choice of Navy blue or red covering with Velcro edge for easy re-packing
• Fully CE approved to ISO 12402
Buoyancy
150N
150N
150N
150N
150N
150N
Webbing Type
Waist Belt
Waist Belt
Waist Belt
Waist Belt
Waist Belt & Harness
Waist Belt & Harness
Operation
Manual
Manual
Automatic
Automatic
Automatic
Automatic
Colour
Navy
Red
Navy
Red
Navy
Red
Part No.
6-30250
6-30251
6-30254
6-30255
6-30260
6-30261
6-30261
6-30260
CHALLENGER JUNIOR LIFE JACKETS
• SOLAS retroreflective tape to allow light to be reflected back to source in
the dark or poor visibility conditions
• Automatic inflation with manual override cylinder inflation
• Oral top-up tube and deflation key included
• Approved emergency whistle, strong lifting loop and strong synthetic
harness webbing included
• Suitable for persons from 15-40Kg
• Supplied with stainless steel buckle and deck harness
• Crotch strap included
• 100N buoyancy
• Choice of Navy blue or red covering with Velcro edge for easy re-packing
• Fully CE approved to ISO 12402
Buoyancy
100N
100N
12
Webbing Type
Waist Belt & Harness
Waist Belt & Harness
Operation
Automatic
Automatic
Colour
Navy
Red
CATALOGUE SUPPLEMENT - I
Part No.
6-30276
6-30277
6-30276
6-30277
Challenger Lifejackets
BOAT SAFETY - LIFEJACKETS
CHALLENGER AQUA-PRO LIFE JACKETS
The Challenger Aqua-Pro life jackets have been ergonomically designed with a slimmer fit, zipped
cover with a storm flap. It has a mesh back to improve comfort and provide breathability as well as an
integral pocket which allows you to stow away the crotch strap when not in use. The Aqua-Pro is also
fitted with a zipped pocket and neoprene neck for added comfort.
• SOLAS retroreflective tape to allow light to be reflected back to
source in the dark or poor visibility conditions
• Single point indicated operating head with automatic and manual
override cylinder inflation
• Oral top-up tube and deflation key included
• Approved emergency whistle, strong lifting loop and strong synthetic
harness webbing included
• Suitable for persons 50Kg up to 55” (140cm) chest
• Supplied with stainless steel buckle and deck harness
• Mesh back with integral crotch strap
• 170N buoyancy or 300N buoyancy options
• Patented Wave Barrier* Technology with 170N Aqua-Pro life jacket
• Red and Black zipped cover with quick burst zip
• Zipped pocket included
• Fully CE approved to ISO 12402
Buoyancy
170N
300N
Webbing Type
Deck Harness & Crotch Strap
Deck Harness & Crotch Strap
Operation
Automatic
Automatic
Colour
Red/Black
Red/Black
Part No.
6-30280
6-30284
* Wave Barrier Technology.
The patented interlocking lobe design of the bladder used in the AquaPro 170 self-rights the wearer in under five seconds, even if the
wearer is unconscious providing an effective wave barrier which
prevents the water from being channelled into the wearers airways
SPARES & ACCESSORIES
CROTCH STRAP
Part No. 6-30290
SOLAS LIFEJACKET
LIGHT Part No. 6-30292
SPARES KIT
SPARES KIT
SPARES KIT
SPARES KIT
SPARES KIT
24g Junior Auto
150/170N
33g Auto
150/170N
33g Manual
275/300N
60g Auto
275/300N
60g Manual
Part No. 6-30295
Part No. 6-30296
Part No. 6-30297
Part No. 6-30298
Part No. 6-30294
CHALLENGER
SPARES GUIDE
Spares kits can be used on other
inflation type life jackets using
United Mouldings operating heads.
Life Jacket Type
Challenger
Challenger
Challenger
Challenger Junior
Challenger Aqua-Pro
Challenger Aqua-Pro
Life Jacket Part No.
6-30250 & 51
6-30254 & 55
6-30260 & 61
6-30276 & 77
6-30280
6-30284
Buoyancy
150N
150N
150N
100N
170N
300N
Operation
Manual
Auto
Auto
Auto
Auto
Auto
Spares Kit Part No.
6-30296
6-30295
6-30295
6-30294
6-30295
6-30297
CATALOGUE SUPPLEMENT - I
13
Devocean Floating Vests
GENERAL BOAT EQUIPMENT - WATERSPORTS
6-32015
6-32001
BEST VEST SIZE CHART:
Size
Chest
Weight
S/M
80-100cm >70kg
L/XL
100-110cm >70kg
XXL/XXXL 110-130cm >70kg
PROMO ADULT VEST
6-32005
• Nylon floating device
• Universal - One size fits all
(Chest: 75-130cm. Weight: 40-100kg)
• Available in Yellow or Red
• CE-approved according to ISO 12402.5
Size
Universal
Yellow Part No.
6-32001
6-32011
BEST VEST
• Nylon floating device
• Nylon side panels for adjustability
• Fully adjustable straps for a better fit
• Size: S-M, L-XL, XXL-XXXL
• Available in Red or Blue
• CE-approved according to ISO 12402.5
Red Part No.
6-32005
Size
Red Part No.
S/M
6-32011
L/XL
6-32012
XXL/XXXL
6-32013
BEAT VEST YOUTH
ALLROUND VEST
• Nylon youth floating device
• Size: Universal (60-70cm
chest, 30-40kg weight)
• CE-approved according to
ISO 12402.5
• Nylon floating device
• Size: S, M, L, XL, XXL
• Available in Black
• CE-approved according to
ISO 12402.5
Size
S
M
L
XL
XXL
Part No. 6-32040
Part No.
6-32022
6-32023
6-32024
6-32025
6-32026
ALLROUND VEST SIZE CHART:
Size
S
M
L
XL
Chest 80-90cm 80-100cm 90-100cm 100-110cm
Weight 50-60kg 60-70kg
>70kg
>70kg
6-32040
XXL
100cm+
>70kg
BEST VEST
EASY BOATING PACKAGE
• 5 Nylon boating vests complete
with ventilating transparent bag
• Content: 2 x S-M, 3 x L-XL
• Horseshoe style
• Reflective panels and non clog
whistle for safety
• 100N CE-approved
according to
ISO 12402.4
Part No. 6-32090
EASY BOATING VEST SIZE CHART:
Size
S/M
L/XL
Newton
78 N
113.5 N
Weight
50-60kg
>60kg
14
Blue Part No.
6-32015
6-32016
6-32017
CATALOGUE SUPPLEMENT - I
Easy Vest
Devocean Combo Skis
& Accessories
GENERAL BOAT EQUIPMENT - WATERSPORTS
GLOBE SKI
BALANCE SKI
GLOBE / BALANCE
COMBO SKI
• Size: 67'' (170cm)
• Beginner – Intermediate RIM
combo pair
• Can be used as either combo
skis or as an entry-level slalom
• Foam lined adjustable
horseshoe bindings with trigger
adjustment
• Tunnel shaped bottom for
more stability
• Bright yellow fins for visibility
Globe: Part No. 6-32120
Balance: Part No. 6-32122
LYNX SKI
LYNX COMBO SKI
• Size: 65'' (165cm)
• Beginner – Advanced wide RIM
combo pair
• Can be used as either combo skis
or as an entry-level slalom
• Wider tip profile and double V
bottom for additional stability with
deep water starts
• Great skis to teach people how to
ski and providing added
confidence to skiers of all levels
• Foam lined adjustable horseshoe
bindings with trigger adjustment
• Bright yellow fins for visibility
Part No. 6-32124
GLOBE JUNIOR SKI
CREATURE TRAINER SKI
GLOBE JUNIOR
COMBO SKI
CREATURE TRAINER
COMBO SKI
• Size: 59'' (150cm)
• Beginner – Intermediate RIM
combo pair for junior skiers
• Can be used as either combo
skis or as an entry-level slalom
• Foam lined heel adjustable
horseshoe bindings with
trigger adjustment
• Tunnel shaped bottom for
more stability
• Bright yellow fins for visibility
• Size: 45'' (117cm)
• Wooden marine coated combo
pair for kids
• Adjustable horseshoe bindings
with trigger adjustment
• Comes with special handle and
rope attachment
• Extra towrope and handle
included
• Stabilizing bar inserts
• Line between skis for stability
Part No. 6-32126
Part No. 6-32127
SPARE
SLALOM
TOE
Adult: Part No. 6-32147
COMBO FIN Part No. 6-32148
COMBO SKIS
SPARE FRONT TOE
SPARE SQUEEZE HEEL
Adult:
Part No. 6-32140
Junior: Part No. 6-32141
Trainer: Part No. 6-32142
Adult:
Part No. 6-32143
Junior: Part No. 6-32144
Trainer: Part No. 6-32145
Wide Track
Traditional
Length
59"
62"
65"
46"
59"
67"
Weight
up to 59kg
36-73kg
50kg and up
up to 33kg
up to 54kg
50kg and up
Binding Size (EU-US)
35-40
37-45
37-45
>36 / > 4,5
35-40 / 3.5 - 7
37-45 / 5.5 - 11.5
CATALOGUE SUPPLEMENT - I
15
Devocean Kneeboard,
Wakeboard, Towables
GENERAL BOAT EQUIPMENT - WATERSPORTS
TRIUMPH KNEEBOARD
ATTITUDE WAKEBOARD PACKAGE
• Handle-hook allows you to
get up easy and quickly
• Bevelled edge
• Ergonomic kneepad
• Strong 3.3'' webbing strap,
neoprene padded, with
easy opening handle
• Includes shock-strap
which absorbs big blows
on the water
• Length: 143.5cm
• Width: 53.5cm
• Weight: 6kg
Attitude 139 Wakeboard and Explore
Bindings (Standard or XL sizes)
Finally a board that actually performs like all
riders want! It’s easy to ride straight behind the
boat when you wish to, but when you want to
cut out hard and make turns, rolls and spins
this board is also the one for you.
• Continuous rocker
• Fiberglass and formica reinforced foam core
• Ultra light RIM construction
• Two 0.9'' plastic center fins
• Performance level: Intermediate
• 8'' insert setup
• Length: 139cm, Tip/tail Width: 26cm
Centre Width: 41cm
• Rider weight: 50-90kg
Part No. 6-32100
Standard Package: 38.5 - 45cm bindings
Part No. 6-32110
XL Package: 43 - 48cm bindings
Part No. 6-32111
Top Design
CRYPTO TOWABLE
TWINS TOWABLE
Deflated size: 53.5'' x 55.5'' (136 x 141cm)
• Nylon cover / Heavy duty PVC
• 4 EVA foam soft-grip handles
• 1 air chamber
• Water drain, big stem valve and
buoyancy chamber
• Rider capacity: 1 person
Deflated size: 76'' x 60'' (193 x 152cm)
• Nylon cover / Heavy duty PVC
• 4 EVA foam soft-grip handles with neoprene knuckle guards
• 1 air chamber
• Water drains, big stem valve and buoyancy chamber
• Rider capacity: 2 persons
Part No. 6-32170
Part No. 6-32172
MUSKETEER TOWABLE
Deflated size: 96'' x 54'' (244 x 137cm)
• Nylon cover / Heavy duty PVC
• 6 EVA foam soft-grip handles with
neoprene knuckle guards
• 1 air chamber
• Water drains, big stem valve
and buoyancy chamber
• Rider capacity: 3 persons
Part No. 6-32174
16
CATALOGUE SUPPLEMENT - I
Bottom Design
ROCKET
TOWABLE
Deflated size 3 men:
109'' (277cm)
• Full nylon cover / Heavy duty PVC
• EVA-foam filled comfort grip handles
• Neoprene comfort seat pads
• 3 Air chambers, including side floats
• Quick connector
• Water drains
• Covered Boston valve and
2 speed valves
Part No. 6-32176
Devocean Towables
GENERAL BOAT EQUIPMENT - WATERSPORTS
SUNDOWN PACKAGE
Included: Sundown, wrist seal, quick release,
orange flag, foot pump and rope for towables.
Part No. 6-32161
ECLIPSE TOWABLE
SUNDOWN TOWABLE
Deflated size: 54'' (137cm)
• Nylon cover / Heavy duty PVC
• Water drain, big stem valve & buoyancy chamber
• 1 air chamber
• 2 EVA foam soft-grip handles
• Rider capacity: 1 person
Part No. 6-32162
Deflated size: 48'' (122cm)
• Nylon cover / Heavy duty PVC
• Water drain, big stem valve & buoyancy chamber
• 1 air chamber
• 2 EVA foam soft-grip handles
• Rider capacity: 1 person
Part No. 6-32160
MAX TOWABLE
SPEED
Adults:
32KMH (20MPH)
Youth:
24KMH (15MPH)
G-FORCE TOWABLE
GIANT TOWABLE
Deflated size: 58'' (147cm)
• Full nylon cover / Heavy duty PVC
• 4 EVA foam soft-grip handles with neoprene knuckle protectors
• 1 air chamber
• Water drain, covered Boston valve and buoyancy chamber
• Rider capacity: 1 person
Part No. 6-32164
Deflated size: 71'' (181cm)
• Nylon cover / Heavy duty PVC
• 8 EVA foam soft-grip handles with Neoprene knuckle guards
• 1 air chamber
• Water drain, Boston valve and buoyancy chamber
• Rider capacity: 3 persons
Part No. 6-32166
COIN 1
Deflated size: 54" (138cm)
• Full nylon cover / Heavy duty PVC
• 3 comfortable neoprene pads
• 4 EVA foam soft-grip handles with
neoprene knuckle guards
• 1 webbing handle
• 1 air chamber
• Water drain, big stem valve and
buoyancy chamber
• Rider capacity: 1 person
Part No. 6-32180
COIN 2
COIN 3
Deflated size: 70" (178cm)
• Improved quality full nylon cover / Heavy duty PVC
• 3 comfortable neoprene pads
• 6 EVA foam soft-grip handles with neoprene
knuckle guards
• 2 webbing handles
• 1 air chamber
• 2 water drains, big stem valve & buoyancy chamber
• Rider capacity: 2 persons
Part No. 6-32182
Deflated size: 80" (203cm)
• Improved quality full nylon cover / Heavy duty PVC
• 3 comfortable neoprene pads
• 6 EVA foam soft-grip handles with neoprene
knuckle guards
• 4 webbing handles
• 1 air chamber
• Water drain, big stem valve and buoyancy chamber
• Rider capacity: 3 persons
Part No. 6-32184
CATALOGUE SUPPLEMENT - I
17
Devocean Ropes
and Handles
GENERAL BOAT EQUIPMENT - WATERSPORTS
TOW ROPE FOR
TOWABLES
BOSTON VALVE
Specs: 50ft (15m)
Part No. 6-32210
Spare inflation valve for towables. Part No. 6-32199
STANDARD ROPE BRIDLE
HEAVY DUTY TOW ROPE
Length of the rope can
easily be adjusted.
Galvanized hooks.
Part No. 6-32202
Specs: 55ft (17m)
• For towing up to a maximum of four people
• Ideal for water sleds and multi
person towables
• 16 strands, 84 filaments rope
• Break strength:
4100lbs (1859kg)
• Float attachment
Part No. 6-32211
WEB BRIDLE
Length of the webbing
can easily be adjusted.
Galvanized hooks.
Part No. 6-32203
WAKEBOARD ROPE
RECREATIONAL SKI ROPE
• 60ft mainline • 5ft, 11'' smooth foam grip handle with wooden bar
• 8 strand ski line • Recreational and fun line
Part No. 6-32220
• 2 section 70ft mainline • 5ft, 12'' smooth rubber grip handle
Part No. 6-32224
CHALLENGE SERIES ROPE
NOVA SKI ROPE
• 60ft mainline • 5ft, 11'' Machined EVA grip handle
• 12 strand ski line • Finger protection on handle for safety
Part No. 6-32221
See Section 6 for
Pumps for Inflatables
SPARES FOR BRAVO INFLATABLES
Closing Clip
for Bravo 7/8/9/10
Part No. 6-62061
Hose Pump Adaptor
Bravo 1/2/7/8/9/10
Part No. 6-62060
Adaptor Set for
Electric Inflators
Part No. 6-62062
18
• 4 or 8 section 70 ft mainline
• 5ft, 12'' machined smooth rubber grip handle
• Constructed from the finest polypropylene
• Sectioned for the perfect rope length
• 8 section version meets official comp. demands
4 Section: Part No. 6-32227 8 Section: Part No. 6-32228
CATALOGUE SUPPLEMENT - I
Adaptor Set for
Hand/Footpumps
Part No. 6-62063
Replacement Hose Kits
Bravo 6 & 12 Part No. 6-62064
Bravo 1/2/7/8/9/10 Part No. 6-62065
For Attwood Ski Mirror see page 21
TREM Miscellaneous
Boat Equipment
GENERAL BOAT EQUIPMENT - TREM
TREM 3 STEP
S/S BOLT-ON
BOARDING LADDER
TREM ANCHOR CONNECTORS
Stainless steel pivoting anchor connector.
Chain
6-8mm
8-10mm
Manufactured in stainless steel.
Suitable for rubber boats transom.
Pipe Ø: 25mm
Width: 220mm
Length: 740mm
Weight: 2.3kg
Part No. 6-25041
Mouth
15mm
22mm
Part No.
N-60164
N-60165
NEW
Stainless steel double pivoting
anchor connector.
Chain
6-8mm
8-10mm
TREM SUPPORTS
Part No.
N-60166
N-60167
NEW
For Self Inflating Lifecraft
Complete with belt with fastening buckle.
Can be applied both in
horizontal & vertical position.
Width: 42cm+
Part No. 6-25619
TREM HORSESHOE
LIFEBUOY
Made of cellular foam with highly
resistant PVC cover.
Part No.
6-25532
6-25533
TREM OBJECT
COMPARTMENT / GLOVEBOX
ABS plastic complete with lock & 2 keys.
Part No. 6-20095
Dimensions:
Inner: 315 x 100 x 165mm
Outer: 344 x 140 x 190mm
Cut-out: 300 x 105 x 168mm
Weight: 55g
Port
Description Visibility Black
12V Port
112.5º 8-30940
12V Starboard 112.5º 8-30941
12V Masthead 225º
8-30943
12V Stern
135º
8-30944
Starboard
Masthead
Colour
Orange
Yellow
For more TREM products see
our Section 6 Catalogue
NEW
TREM LED ROUND NAVIGATION LIGHT For boats up to 20m
• Polycarbonate body
• UV resistant lens
• IP56 ingress rating
• Fitted with LED fitment
• Voltage range: 6-32V
• RINA approved product
Buoyancy
15kg
15kg
NEW
White
8-30945
8-30946
8-30948
8-30949
Stern
Chrome
8-30950
8-30951
8-30953
8-30954
TREM ALL ROUND LED
NAVIGATION LIGHTS
Suitable for boats up to 20m
• Base mount ABS body with UV resistant lens
• IP56 Ingress rating
NEW
• 360º all round LED fitment
• Voltage range 6 -36V
• RINA approved product
Part No. 8-30980
Part No. 8-30984
CATALOGUE SUPPLEMENT - I
19
CAN-SB General Boat
Equipment
NEW RANGES
GENERAL BOAT EQUIPMENT - CAN-SB
CAN-SB PONZA LIFEBUOY
Container:
H: 80cm
W: 85cm
D: 28cm
6-99027
O ring life buoy manufactured in high
density polythene filled with
polyurethene closed cell foam,
reflecting tape and rope.
• SOLAS & RINA approved
Part No. 6-99025
Specifications:
External Diameter:
Internal Diameter:
Weight:
Total height of post
& container 173cm
740mm
435mm
2.5kg
PONZA LIFEBUOY ACCESSORIES
Description
Container only wall mount / post mount
Floor mount post for container*
Orange rope 8mm x 30m
Lifebuoy & rope
not included.
6-99029
Part No.
6-99027
6-99028
6-99029
Base
Post
ø 12mm
40 x 60mm
6-99028
Height:
150cm
300 x 300mm
*Fixings not included
6-20062
CAN-SB INSPECTION PLATE
6-20050
6-20051
6-20060
Part No.
6-20060
6-20062
• In white plastic.
• Latching lid
Open Dia.
185mm
235mm
External Dia.
265mm
315mm
Hole Dia. Cutout
215mm
265mm
6-20052
CAN-SB HATCHES
6-20053
with removeable hinge.
In white plastic. Opens 180º.
Part No.
6-20050
6-20051
6-20052
6-20053
Opening Size*
190 x 290mm
274 x 523mm
290 x 290mm
375 x 428mm
External Size
270 x 370mm
357 x 606mm
374 x 374mm
460 x 515mm
Cut Out Size
195 x 298mm
283 x 531mm
298 x 298mm
384 x 437mm
*excluding latch
CAN-SB STORAGE BOXES
Part No.
6-20085
6-20088
Description
Plastic Deck Storage Box with door
Plastic Fire Extinguisher* Holder with door
6-20085
Internal W x H x D
120 x 370 x 112mm
120 x 370 x 112mm
* Fits fire extinguishers 6-99051 & 6-99052
20
CATALOGUE SUPPLEMENT - I
6-20088 Closed
External W x H x D
180 x 430 x 130mm
180 x 430 x 130mm
Cut Out Size
124 x 374mm
124 x 374mm
6-20088 Open
Fitted Depth
110mm
110mm
Transom Drain Sockets
Attwood Ski Mirror
GENERAL BOAT EQUIPMENT - CAN-SB
6-22918
6-22919
Description
Expanding Plug, Black
Expanding Plug, Black
Expanding Plug, Black
6-22924 / 6-22925
CAN-SB PLASTIC TRANSOM DRAIN SOCKETS
CAN-SB EXPANDING PLUGS
Part No.
6-22917
6-22918
6-22919
6-22922 / 6-22923
NEW RANGES
6-22917
Part No.
6-22922
6-22923
6-22924
6-22925
Size*
40mm
35mm
22.5mm
* Pre expanded size
Description
Plastic Transom Drain Socket, White
Plastic Transom Drain Socket, White
Plastic Transom Drain Socket, White
Plastic Transom Drain Socket, White
CAN-SB PLASTIC TRANSOM DRAIN CAPS
Length
115mm
111mm
115mm
175mm
ID
40mm
40mm
40mm
40mm
OD
70mm
74mm
70mm
75mm
For Hose
45mm
50mm
–
–
CAN-SB TELESCOPIC
TRANSOM DRAIN SOCKET
White Plastic Transom Drain Socket
Inner Diameter: 45mm
Outer Diameter: 70mm
Length: 195mm
For Hose: 50mm
Part No. 6-22928
Plastic Drain Cap with non return valve
(for 6-22928).
OD: 81mm Part No. 6-22926
Plastic Drain Cap with non return valve
(for 6-22928).
OD: 90mm Part No. 6-22927
GENERAL BOAT EQUIPMENT
ATTWOOD CHROME SKI MIRROR
Shatterproof, 180° convex mirror eliminates blind spots. Mirror is compact and constructed of lightweight chrome plated zinc ZAMAK.
Adjusts to any position up-and-down or side-to-side, then secures in desired location.
Dimensions:
Width:
Height:
Features
185mm (7 ⁄16 ")
63.5mm (21⁄2 ")
5
• Provides 180º rear vision eliminating blind spots
• Die-cast zinc mirror with Perma-Plate® chrome finish
• Universal mount installs on dash or windshield
Part No. 6-31990
• Windshield mounting bracket can be used on windshield
extrusions up to 19mm (3⁄4 '') thick
For Devocean
Watersports
Equipment see
pages 14 -18
CATALOGUE SUPPLEMENT - I
21
Dometic Cooker,
Miscellaneous
GENERAL BOAT EQUIPMENT
DOMETIC STARLIGHT GIMBAL COOKER
Oven with grill and 2 burner hob Part No. 6-01400
• Extra slim design for small galleys
• Easy clean stainless steel surface
• 28 Litre thermostatically controlled oven with grill
• Transparent bottom hinged oven door with lock
• Stainless steel burner caps and pan supports
• Semi gimbal suspension
• Includes oven rack and baking tray
• Full flame failure gas shut off
Technical Specification:
Burner Outputs:
No. of Hob Burners:
Hob Outputs:
Oven Output:
Grill Output:
Gas Consumption:
Oven gas consumption:
Grill gas consumption:
Combined hob gas consumption:
LPG Gas:
LPG Connection:
Dimensions:
Cooker only (WxHxD):
Cooker with Gimbals (WxHxD):
Weight:
NEW
2
1 x 2.2kW, 1 x 1.8kW
1.1kW
1.3kW
80g/h
100g/h
291g/h
Propane or Butane
8mm tube
448.6 x 507.5 x 356.9mm
475 x 539.5 x 356.9mm
23kg
PROPELLER BAGS
Five sizes of orange PVC propeller bags with a draw string at the neck. To comply
with the law these must be placed over the propeller when the boat is being trailed.
Part No.
6-20900
6-20901
6-20902
6-20903
6-20904
Size
Small
Medium
Large
XL
XXL
Dimensions
40 x 40cm
50 x 50cm
63 x 63cm
67 x 65cm
92.5 x 77.5cm
For engines
Up to 6hp
6hp to 40hp
Large motors inc outboards
Large motors inc outboards
Large motors inc outboards
FISHING ROD HOLDERS
WHITE PLASTIC
FIXED ROD
HOLDER
Inner diameter: 40mm
45° angle
Part No. 6-22750
22
S/S 45° FIXED
ROD HOLDER
S/S FLUSH MOUNT
ROD HOLDER
SIDE/WALL MOUNT
ROD HOLDER
With black hole cover
Inner diameter: 42mm
45° angle
Part No. 6-22752
Black plastic inner & flange
Inner diameter: 42mm
Flange: 88 x 115mm
Overall length: 210mm
90° angle
Part No. 6-22754
In 316 stainless steel with
white PVC top sleeve
Overall length: 254mm
Inner diameter: 40mm
Inner tube dia.: 48.8mm
Part No. 6-22760
CATALOGUE SUPPLEMENT - I
SINGLE WALL
MOUNT ROD
HOLDER
Inner diameter: 40mm
Part No. 6-22761
DELIVERY
Please contact your nearest Aquafax depot
for carriage details.
Ritchie Navigation
GENERAL BOAT EQUIPMENT - COMPASSES
• 3" CombiDamp flat dial
• Easily installed (download a template from www.ritchienavigation.com)
• Exclusive built-in 12V green night illumination
• Built-in compensators to easily adjust for deviation
• Scientifically matched sapphire jewel & hardened steel pivot dial movement
• Powerful Directiveforce magnets for fast heading lock-on
• Movable sun shield
• High temperature composite construction for
extended operating range
• 100% repairable
• Exclusive 5-Year Ritchie warranty
• Protective cover available: V-83-C
(Part No. 16-80081-1)
Dial Size:
Design:
Night Lighting:
Compensators:
Mounting Hole:
Warranty:
Approx. Shipping Wt:
3" (76mm)
Combi Dial
12V Green
Built-in
43 ⁄16 '' (107mm)
5-Year
1lb. 4oz (567g)
NEW RANGE
RITCHIE VOYAGER® F-83, 3'' Dial (Flush Mount)
The Wheelmark approval is for Lifeboat and Rescue boat
compasses. These compasses are also suitable for
sailboats, power boats and motor sailing vessels.
The -WM suffix signifies type approval and compliance with
the Navigation requirements of Marine Equipment Directive
(MED) 95/98/EC and the last modification by Directive 2011/75/EU.
Wheelmark certificates can be downloaded from www.ritchienavigation.com
6-80088-WM
Model
F-83
F-83W
Colour
Black
White
Mount
Flush
Flush
Part No.
6-80088-WM
6-80089-WM
6-80089-WM
RITCHIE NAVIGATOR™ FNW-201 41 ⁄2 '' Dial (Flush Mount)
• 41⁄2 " PowerDamp flat card dial with large numerals
• Easily installed, fits 4.75" (121mm) to 5.125" (130 mm)
mounting hole, (download a template from
www.ritchienavigation.com)
• Built-in compensators to easily adjust for deviation
• Scientifically matched sapphire jewel & hardened steel pivot dial
movement
• Powerful Directiveforce magnets for fast heading lock-on
• 12V green LED lighting standard
• Built-in compensators to easily adjust for deviation
• Movable sun shield
• 45 degree lubber lines
Dial Size:
• High temperature composite construction for
Design:
extended operating range
Night Lighting:
• 100% repairable
Compensators:
• Exclusive 5-Year Ritchie warranty
Mounting Hole:
• Custom fitted protective covers to special order
Warranty:
• Protective cover available: N-203-C
Approx. Shipping Wt:
(Part No. 16-80170-1)
Model
Colour
FNW-201 White
Mount
Flush
Part No.
6-80171
4 1⁄2 " (114mm)
Flat-card or Combi Dial
12V Green
Built-in
51⁄8 '' (130mm)
5-Year
2lb. 10oz (1.19kg)
6-80171
Black version also available - see Section 6 for details
6-80170
See Section 6 for Ritchie Compasses
CATALOGUE SUPPLEMENT - I
23
Turnbutton & “Lift the
Dot” Kits
GENERAL BOAT EQUIPMENT- CANOPY FASTENERS
NEW RANGE
FASTENERS
A range of fastener kits all blister packed, full assembly instructions are given on the rear of the pack.
Turnbutton Fastener Kit with two hole bases, 6mm
TURNBUTTON KITS
With a simple "twist to lock" action, the turnbutton
fastener is positively engaged by twisting the knob.
Commonly found on boat covers (especially
narrowboat cratch covers), they are an essential for
any marine repair kit.
(Stainless Steel or Brass Nickel Plated )
• 5 x 6mm Turnbuttons with two
hole bases
• 5 x Eyelets
• 5 x Washers
• 10 x S/S Screws
Available in stainless steel with polished / self
coloured finish, or heavy gauge brass with
heavy duty nickel plate finish.
Part No. 6-68400 Stainless Steel
Part No. 6-68401 Brass Nickel Plated
Turnbutton Fastener Kit for fabric to
fabric application, 7mm
Turnbutton Fastener Kit with two hole
bases, 8mm
Turnbutton Fastener Kit with two hole
bases, 10mm
(Brass Nickel Plated )
• 5 x 7mm Pronged Turnbuttons
• 5 x Clinch Plates
• 5 x Eyelets
• 5 x Washers
Part No. 6-68402
(Brass Nickel Plated )
• 5 x 8mm Turnbuttons with two hole bases
• 5 x Eyelets
• 5 x Washers
• 10 x Stainless Steel Screws
Part No. 6-68403
(Brass Nickel Plated )
• 4 x 10mm Turnbuttons with two hole bases
• 4 x Eyelets
• 4 x Washers
• 8 x Stainless Steel Screws
Part No. 6-68404
“Lift the Dot” Fastener Kit for Fabric
to Fabric Application
“LIFT THE DOT” KITS
With a simple "snap on, pull off" action, the
fastener locks on three sides of the stud and will
only detach from the fourth trademarked side by
lifting the dot / spot.
(Brass Nickel Plated )
• 5 x “Lift the Dot” Fasteners
• 5 x Clinch Plates
• 5 x Pronged Studs
• 5 x Clinch Plates for Pronged Studs
Made in heavy gauge brass with phosphor
bronze spring, finished in heavy duty nickel plate.
24
Part No. 6-68410
“Lift the Dot” Fastener Kit with Two
Hole Base Studs* (Brass Nickel Plated )
“Lift the Dot” Fastener Kit with M5
Studs* (Brass Nickel Plated )
“Lift the Dot” Fastener Kit with
Woodscrew Studs* (Brass Nickel Plated )
• 5 x “Lift the Dot” Fasteners
• 5 x Clinch Plates
• 5 x Two Hole Base Studs*
• 10 x Stainless Steel Screws
• 5 x “Lift the Dot” Fasteners
• 5 x Clinch Plates
• 5 x M5 x 10mm Studs*
• 5 x M5 Nuts
• 5 x “Lift the Dot” Fasteners
• 5 x Clinch Plates
• 5 x Woodscrew Studs*
* Kit with double height two hole base studs available
* Kit with double height M5 studs available
Part No. 6-68411 with regular base studs
Part No. 6-68412 with double height base studs
Part No. 6-68413 with regular M5 studs
Part No. 6-68414 with double height M5 studs
CATALOGUE SUPPLEMENT - I
* Kit with double height woodscrew studs available
Part No. 6-68415 with regular woodscrew studs
Part No. 6-68416 with double height woodscrew
studs
Press Stud & Eyelet Kits,
Tonneau Buttons & more
GENERAL BOAT EQUIPMENT- CANOPY FASTENERS
NEW RANGE
FASTENERS
A range of fastener kits all blister packed, full assembly instructions are given on the rear of the pack.
PRESS STUD KITS
With easy "snap on, pull off" action, and a heavy duty spring to limit the risk of unwanted detachment.
Available in stainless steel with polished / self coloured finish, or heavy gauge brass with heavy duty nickel plate finish.
Press Stud Fastener Kit for fabric to wood application
Press Stud Fastener Kit for fabric to fabric application
(Stainless Steel or Brass Nickel Plated )
(Stainless Steel or Brass Nickel Plated )
• 10 x 15.2mm Ø buttons
(Ligne 24)
• 10 x Sockets
• 10 x Studs with
10mm Screw
• 1 x set of closing tools
• 10 x 15.2mm Ø buttons
(Ligne 24)
• 10 x Sockets
• 10 x Studs
• 10 x Eyelets
• 1 x set of closing tools
Part No. 6-68420 Stainless Steel
Part No. 6-68422 Brass Nickel Plated
Part No. 6-68421 Stainless Steel
Part No. 6-68423 Brass Nickel Plated
BRASS EYELET & WASHER REPAIR KITS
Brass sail eyelets and washers reinforce and
strengthen perforations in fabrics. These kits
are ideal for maintaining and repairing boat
covers, canopies, sails, tarpaulins etc.
Made in Brass with polished / self
6-68430
coloured finish.
6-68432
6-68431
6-68433
6-68434
6.7mm (1/4'') ID Kit
8mm (5/16'') ID Kit
9.5mm (3/8'') ID Kit
11.1mm (7/16'') ID Kit 12.7mm (1/2'') ID Kit
11mm Closed Eyelet OD
• 50 x 6.7mm ID Eyelets
• 50 x Washers
• 1 x Set of Closing Tools
Part No. 6-68430
14.3mm Closed Eyelet OD
• 25 x 8mm ID Eyelets
• 25 x Washers
• 1 x Set of Closing Tools
Part No. 6-68431
17.5mm Closed Eyelet OD
• 25 x 9.5mm ID Eyelets
• 25 x Washers
• 1 x Set of Closing Tools
Part No. 6-68432
20.6mm Closed Eyelet OD
• 25 x 11.1mm ID Eyelets
• 25 x Washers
• 1 x Set of Closing Tools
Part No. 6-68433
23.8mm Closed Eyelet OD
• 15 x 12.7mm ID Eyelets
• 15 x Washers
• 1 x Set of Closing Tools
Part No. 6-68434
RUBBER GUYS
Overall length: 76mm (3'')
Pack of 6 Part No. 6-68440
TONNEAU BUTTON KIT
S/S LACING HOOKS
• 4 x Stainless Steel Lacing Hooks
• 8 x Stainless Steel Screws
Polished / Self colour finish
Part No. 6-68441
• 10 x Norwegian Buttons
• 10 x Stainless Steel Screws
Made in heavy gauge brass with heavy duty
nickel plate finish
Part No. 6-68442
TONNEAU BUTTON KITS
• 4 x Plastic Buttons
• 4 x Stainless Steel Screws
Part No. 6-68443 Black Buttons
Part No. 6-68444 White Buttons
CATALOGUE SUPPLEMENT - I
25
Marinco Nicro Vents
GENERAL BOAT EQUIPMENT - VENTILATION
SOLAR MINI VENT 1000
The Solar Mini Vent 1000 offers a solar powered exhaust
only ventilation in daylight hours to keep a cabin cool,
and passive ventilation during nightime hours
Part No. 6-11600 White
Part No. 6-11601 S/Steel
Specifications:
Overall Dimensions:
Fan Vent Size:
Cut Out Hole Size:
Interior Trim size:
• Solar powered exhaust fan operated ventilation during
daylight hours
• Passive ventilation during nightime hours
• Whisper quiet fan operation and no wiring needed
• Includes shut off damper for rough seas and white plastic
interior trim
• Available in white plastic ABS or with stainless steel cover
• Capacity: 700cu.ft per hour under solar power ventilation
7'' (178mm) Dia. x 13⁄4 '' (45mm) high
3'' (76mm) Dia.
33⁄4 '' (96mm) Dia. to 6'' (152mm) Dia.
Cut out 33⁄4 '' (96mm) Dia. x 5'' (127mm) OD
DAY / NIGHT PLUS SOLAR VENT
Circulates fresh air in or out of the boat cabin eliminating mould, mildew and musty air. Solar power
operates fan during daylight hours and a built in battery allows the fan to run during nightime hours.
• Solar powered fan operation and built in battery charge during daylight hours
• Built in battery fan operation during nightime hours
• Whisper quiet fan operation and no wiring needed
• Includes intake and exhaust fans, insect screen and white plastic interior trim
• Complete shut off damper to close off air and protect against rough seas.
• Built in on/off fan switch
• Available in white plastic ABS or with stainless steel cover
• Can be used in place of snap in deck plates 6-11628 3" and 6-11629 4"
• Capacity: 1000cu.ft per hour (4" version)
Part No.
6-11605
6-11606
6-11607
6-11608
Finish:
S/Steel
White
S/Steel
White
Overall Dimension:
9'' (229mm) Dia. x 21⁄4 '' (57mm) high
Fan Vent Size:
3'' (76mm) Dia.
4'' (101mm) Dia.
Cut Out Hole Size:
33⁄4 '' (96mm) Dia.
43⁄4 ''' (121mm) Dia.
Interior Trim Size: Cut out 33⁄4 '' (121mm) Dia Cut out 43⁄4 '' (121mm) Dia
x 5'' (127mm) OD
x 6'' (152mm) OD
AIR VENT 500 PASSIVE EXHAUST
VENTILATION
The Air Vent 500 is a
non-solar ventilator that
can passively move 600 to
1000 cubic feet of air per
hour in a 15 knot breeze.
An economical solution to use
with solar powered or other DC
powered fan ventilation to create cross flow air circulation
• High volume passive ventilation with up to 1000cu.ft per
hour air flow in a 15 knot breeze
• Strong U.V stabilised white ABS construction with
translucent centre allowing light through
• Complete shut off damper to close off air ventilation
from below
• Fits using a 33⁄4 " diameter hole or can be retrofitted to an
existing hole up to 6" diameter
Part No. 6-11611
Specifications:
Vent Size:
3'' (76mm) Dia.
Overall Dimensions: 7'' (178mm) Dia. x 13⁄4 '' (45mm) high
Cut Out Hole Size:
33⁄4 '' (96mm) Dia. to 6'' (152mm) Dia.
26
CATALOGUE SUPPLEMENT - I
NiMh Nickel Metal Hybrid Battery for Day/Night Plus Vents
Replacement battery for current Day/Night Plus vents, as well
as, older model PowerVent 3000 and Day / Night 2000 Vents.
Part No. 6-11610
• High capacity C-cell battery
• 1.2 volts, 2.0 amp-hours
• Average life: 3 - 5 years
• Environmentally friendly
SNAP-IN DELUXE LOW PROFILE PVC COWL VENT
Made from soft, durable PVC, these vents are perfect for an air intake to
supplement solar or DC powered ventilation and are also commonly used as
bilge ventilation with or without a mechanical blower.
• Soft and durable PVC construction, returns to
original shape if stepped on
• Safer than metal cowl vents preventing injury
and snagging lines
• Supplied with snap-in deck plate and
watertight flush fitting cover
Part No:
Vent Size:
Overall Dimensions:
Cut Out Hole Size:
6-11620
3'' (76mm) Dia.
H: 41⁄2 '' (114mm)
W: 6'' (152mm)
D: 4'' (101mm)
33⁄4 '' (96mm) Dia
WHITE SNAP-IN DECK PLATES
• Includes flush fit snap-in watertight cover
• Use with any Marinco snap-in vent system
Vent Size
3" (76mm)
4" (101mm)
Cut-Out Hole Size
33⁄4 " (96mm) Dia.
43⁄4 " (121mm) Dia.
Part No.
6-11628
6-11629
6-11621
1'' (101mm) Dia.
H: 51⁄2 '' (140mm)
W: 73⁄4 '' (197mm)
D: 5'' (127mm)
43⁄4 '' (121mm) Dia
Marinco Spot Lights
GENERAL BOAT EQUIPMENT - SPOT LIGHTS
WIRELESS REMOTE SPOT LIGHT
• Universal 12/24 volt circuit with bright 100W, H3 halogen bulb
• UV resistant, IP56 Weatherproof ABS housing and Lexan® lens
• O-ring sealed housing, designed for the harsh marine environment - moisture, salt,
shock and vibration tested
• Universal snap-in mounting system (can be mounted upside down)
• Super-quiet, all-weather motor with limit stops provides a full range of coverage
• 370° sweep and 120° Tilt (75° up and 45° down)
• One touch auto sweep and S.O.S. function
• Wireless dash mount remote standard; (hard wired & handheld remotes are optional)
• Available in white, black and chrome
Specifications:
Bulb:
Power (Input voltage):
Current draw (idle/in use):
Peak Beam Intensity:
Peak Beam Distance:
Lux @ 66' (20 m):
Coverage at 66' (20 m):
Rotation:
Tilt:
Wireless range:
Dimensions (W x H x D):
Weight:
Housing material:
Lens material:
Operating temp range:
IP Rating:
100 watt, H3 halogen
12V or 24V
0.03 amps / 7.0 amps
210,000 Cp
917 ft (280m)
525 Lux
132 sq ft (12 sq m)
370° (built in limit stops)
120° Tilt (75° up & 45° down)
200 ft (65 m)
7.5" x 7.5" x 9.25"
(19cm x 19cm x 23.5cm)
3.30lbs (1.5kg)
UV resistant PC/ASA
UV resistant Lexan®
5°F – 113°F (-15°C – 45°C)
IP56
Description
Wireless Remote Spot Light
Wireless Remote Spot Light
Wireless Remote Spot Light
Colour
Black
White
Chrome
Part No.
6-11500
6-11501
6-11502
For spare bulbs see Section 8
REMOTE OPTIONS
Part No.
Remote Specifications:
Power
Current Draw (idle/in use):
Wireless Range:
Estimated Battery Life:
Dimensions (W x H x D):
Weight:
Housing Material:
Button Material:
Operating Temp Range:
IP Rating:
6-11512
Included
Wireless Bridge Remote
12 or 24 volt (hard wired)
negligible
200ft (65m)
—
3.5" x 2.25" x 0.75"
88 x 57 x 19mm
2.12 oz (60 g)
UV resistant PC/ASA
Silicone (glow in the dark)
5°F – 113°F (-15°C – 45°C)
IP54
6-11511
(Optional)
Hand Held Bridge Remote
CR2540 button cell battery
negligible
200 ft (65 m)
> 40 hours (continuous use)
2.0" x 3.78" x 1"
51 x 96 x 25mm
2.82 oz (80 g)
UV resistant PC/ASA
Silicone (glow in the dark)
5°F – 113°F (-15°C – 45°C)
IP56
6-11513
(Optional)
Wired Bridge Remote
12 or 24 volt (hard wired)
negligible
—
—
3.5" x 2.25" x 0.75"
88 x 57 x 19mm
2.12 oz (60 g)
UV resistant PC/ASA
Silicone (glow in the dark)
5°F – 113°F (-15°C – 45°C)
IP54
CATALOGUE SUPPLEMENT - I
27
Marinco AFI Horns
GENERAL BOAT EQUIPMENT - HORNS
ELECTRONIC HORN (White Grill)
DROP-IN “H” HORN with Grills
• Electronic Piezo horn sound
• One piece water resistant housing, grill is
molded to horn
• 107 dB(A) at one meter
• Fundamental frequency: 550±100Hz
• Mounts in a standard 57mm dia. (2.25") opening
• Draws less than 1A, maximum draw: 0.8A
• Internal space requirements (W x H x D):
57mm (2.25") x 57mm (2.25") x 50mm (2")
• Grill dimensions (W x H x D): 124mm (4.875")
x 70mm (2.75") x 127mm (5")
Part No. 6-11002
• Comes with both black ABS and white ASA
snap-in grills
• dB(A) rating: 107 at one meter
• Fundamental frequency: 370±20Hz
• Internal space requirements (H x W x D):
50mm (2") x 86mm (3.375") x 82mm (3.25")
• Distinctive marine horn sound
• Enclosed sound unit
• Easy installation or retrofit, mounts from
the outside
• 12 volt, maximum amp draw: 4 amps
Part No. 6-11004
SINGLE TRUMPET MINI AIR HORN
DUAL TRUMPET MINI AIR HORN
DUAL TRUMPET AIR HORNS (24V)
• Solid brass construction, chrome plated
• Non-corrosive Lexan® polycarbonate diaphragm
• Includes compressor, air tubing, fittings, and
hardware (12V compressor produces 9-11 PSI)
• Dimensions (L x W x H): 241mm (9.5") x 89mm
(3.5") x 89mm (3.5")
• Maximum amp draw: 12V: 20A
• dB rating: 126 at one meter, 1/3 octave band
• Fundamental frequency: 630±15Hz
Part No. 6-11020
• Solid brass construction, chrome plated
• Non-corrosive Lexan® polycarbonate diaphragm
• Includes compressor, air tubing, fittings, and
hardware (12V compressor produces 9-11 PSI)
• Dimensions (L x W x H): 241mm (9.5") x
127mm (5") x 95mm (3.75")
• Maximum amp draw: 12V: 20A
• dB(A) rating: 127 at one meter, 1/3 octave band
• Fundamental frequency: 630±15/525±15Hz
Part No. 6-11022
• Chrome plated
• Non-corrosive Lexan® polycarbonate diaphragm
• Includes compressor, air tubing, fittings,
and hardware
• Dimensions (L x W x H): 431mm (17") x 178mm
(7") x 95mm (3.75")
• Maximum amp draw: 24V: 10A
• dB rating: 121 at one meter, 1/3 octave band
• Fundamental frequency: 375±15/315±15Hz
Part No. 6-11027
AIR HORN COMPRESSOR
• Replacement compressor fits all Marinco
AFI™ Air Horns
• Dimensions (D x L): 66mm (2.625") x
127mm (5")
• Includes mounting bracket
• Maximum amp draw: 20 amps, produces
9 - 11 PSI
Part No. 6-11030 (12V) Part No. 6-11031 (24V)
28
CATALOGUE SUPPLEMENT - I
MINI HIDDEN HORN
• Type 304 stainless steel diaphragm
• Dimensions (W x H x L): 82mm (3.25") x
44mm (1.75") x 76mm (3")
• Maximum amp draw: 3 amps
• dB(A) rating: 105 at one meter
• Fundamental frequency: 440±20Hz
• This horn is not designed for installation in
exposed areas.
Part No. 6-11010
SINGLE TRUMPET ELECTRIC HORN (24V)
• 100% stainless steel exterior
• Type 304 stainless steel diaphragm
• Includes laminated horn signal card and stainless steel mounting screws
• Dimensions (L x W x H): 419mm (16.5") x 101mm (4") x 120mm (4.75")
• Maximum amp draw: 2.5 amps
• dB(A) rating: 118 at one meter
• Fundamental frequency: 390±15Hz
Part No. 6-11041
Marinco AFI Horns
GENERAL BOAT EQUIPMENT - HORNS
COMPACT SINGLE TRUMPET
ELECTRIC HORN (12V)
COMPACT DUAL TRUMPET
ELECTRIC HORN (12V)
• 100% stainless steel exterior
• Type 304 stainless steel diaphragm
• Dimensions (L x W x H): 355mm (14") x 89mm
(3.5") x 101mm (4")
• Maximum amp draw: 3.5 amps
• dB(A) rating: 108 at one meter
• Fundamental frequency: 460±15Hz
Part No. 6-11044
• 100% stainless steel exterior
• Type 304 stainless steel diaphragm
• Dimensions (L x W x H): 406mm (16") x 190mm
(7.5") x 101mm (4")
• Maximum amp draw: 7 amps
• dB(A) rating: 110 at one meter
• Fundamental frequency: 460±15/415±15Hz
Part No. 6-11046
MINIBLAST™ COMPACT
ELECTRIC HORNS (12V)
• Long lasting, non-corrosive ASA plastic cover
• Sealed sound unit with stainless steel diaphragm
• Mounts in same hole pattern as the 6-11054 horn
• Dimensions (L x W x H): 111mm (4.375") x
86mm (3.375") x 50mm (2")
• Maximum amp draw: 3A, 12V
• dB(A) rating: 106 at 1m (3')
• Fundamental frequency: 440±20Hz
Part No. 6-11050 (White)
Part No. 6-11052 (Black)
MINI COMPACT
ELECTRIC HORN (12V)
MINI TWIN ELECTRIC
HORN (12V)
COMPACT SINGLE HORN INTERNATIONAL
WITH BLACK COVER (12V) SHORTY HORN (12V)
• Totally sealed sound unit
• Type 304 stainless steel cover,
diaphragm, mounting bracket
• Dimensions (L x W x H): 76mm
(3") x 82mm (3.25") x 44mm
(1.75")
• Maximum amp draw: 3A, 12V
• dB(A) rating: 106 at one meter
• Fundamental frequency:
440±20Hz
Part No. 6-11054
• Type 304 stainless steel covers,
diaphragms, and mounting bracket
• Dimensions (L x W x H): 76mm (3")
x 203mm (8") x 44mm (1.75")
• Maximum amp draw: 6A, 12V
• dB(A) rating: 109 at one meter
• Fundamental frequency:
490±20/440±20Hz
Part No. 6-11056
• Stainless steel diaphragm and
mounting bracket
• Black polypropylene cover
• Dimensions (L x W x H): 114mm
(4.5") x 101mm (4") x 76mm (3")
• Maximum amp draw: 4A, 12V
• dB(A) rating: 108 at one meter
• Fundamental frequency:
350±15Hz
Part No. 6-11058
• Stainless steel diaphragm and
mounting bracket
• ABS, triple chrome-plated housing
• Dimensions (L x W x H): 108mm
(4.25") x 127mm (5") x 165mm (6.5")
• Maximum amp draw: 4A, 12V
• Fundamental frequency:
290±15 Hz
• Loudest Marinco® compact
electric horn
• dB(A) rating: 123 at one meter
Part No. 6-11060
For Marinco BEP Pro Installer Series, see pages 74 - 78
CATALOGUE SUPPLEMENT - I
29
Marinco AFI Wiper Kits
& Motors
GENERAL BOAT EQUIPMENT - WIPERS
WMW WIPER KIT (12V) Windshield Mount: 3/8" (9mm) shaft diameter
KIT CONTENTS:
• WMW Wiper Motor
• 11.5" (292mm) Deluxe stainless steel
curved blade (6-11311)
• Deluxe adjustable 6.75" to 10.5" (171 266mm) stainless steel arm (6-11340)
• Sweep: 80º
• Shaft length: 2.5'' (63mm)
Part No. 6-11200
WMW Wiper Motor Features:
• Water-resistant sealed motor
• Chrome-plated brass case and shaft housing
• Stainless steel front plate and wiper shaft
• Maximum current draw: 2 amps
• Shaft diameter: 3/8" (9mm)
• For external use in open cabin boats
• Dimensions (L x W x D): 4.25" (108mm)
x 2.75" (70mm) x 3.5" (89mm)
STANDARD WIPER KIT (12V) Windshield Mount: 3/8" (9mm) shaft diameter
KIT CONTENTS:
• STD Wiper Motor
• 11.5" (292mm) Deluxe stainless steel
curved blade (6-11311)
• Deluxe adjustable 6.75" to 10.5" (171 266mm) stainless steel arm (6-11340)
• Sweep: 80º
• Shaft Length: 2.5'' (63mm)
Part No. 6-11204
STD Wiper Motor Features:
• Corrosion-proof aluminium alloy case with black
crackle finish
• Base & mounting plates are chrome plated
naval brass
• Maximum current draw: 2 amps
• 80° sweep, adjustable right or left self-parking
• Shaft diameter: 3/8" (9mm)
• Dimensions (L x W x D): 3.875" (98mm) x
2.25" (57mm) x 3.5" (89mm)
500 WIPER KIT (12V) Windshield Mount: 1/2" (13mm) shaft diameter
• 500 Waterproof Wiper Motor (is totally sealed and 100% waterproof)
• 11.5" (292mm) Deluxe stainless steel curved blade (6-11311)
• Deluxe adjustable 6.75" to 10.5" (171 - 266mm) stainless steel arm (6-11340)
• Sweep: 80º
• Shaft Length: 2.5'' (63mm)
Part No. 6-11210
MRV WIPER MOTOR
• Easily powers 22" (559mm) x 22" (559mm) deluxe arm/blade combinations, or a 20"
(508mm) x 20" (508mm) premier arm/blade combination at sweep sets of 80° or less
• Factory pre-set sweep of 80º or 110º adjustable to 45º, 60º, 80º or 110º
• 0.625" (16mm) diameter shaft
• Available in 2 shaft lengths: 1.5" (38mm), 2.5" (63mm), *includes 0.5" (13mm) length of
knurled arm fitting
• Corrosion-resistant casing
• Heavy-duty motor with right angle drive
• Two-speed motor, can be operated as one speed
• Solid brass knurled drive nut with brass and stainless
steel drive shaft
• Adjustable right or left self parking, coast to park
• Includes 5 amp fuse and holder
• Stainless steel fasteners and mounting bracket
• Use with three-position switch (not included)
• Compact size (L x W x D): 7.625" (193mm) x 4"
Shaft*
Voltage Sweep
(101mm) x 2" (51mm)
1.5"
(38mm)
12V
80°
• Stall torque: 109 in-lbs (125 kgf/cm: 12.3 Nm)
2.5"
(63mm)
12V
80°
• Stall current: 11.5–13.0 amps
2.5" (63mm)
12V
110°
• No load current: 0.5–1.2 amps
2.5" (63mm)
24V
110°
30
CATALOGUE SUPPLEMENT - I
Part No.
6-11220
6-11224
6-11226
6-11227
Marinco AFI Wiper Kits
& Motors
GENERAL BOAT EQUIPMENT - WIPERS
1000 WATERPROOF WIPER MOTOR
• Powers 16" (406mm) Deluxe arm and 16" (406mm) Deluxe blade
combinations at a sweep set of 110°
• Factory pre-set sweep of 80°, adjustable to 50°, 65°, 80°, or 110°
• 0.625" (16mm) diameter shaft
• Fully sealed waterproof housing made of UV stabilized, hightemperature, high-impact thermoplastic
• 12 volt heavy-duty motor with anti-rotation drive shaft
• Knurled drive shaft and solid brass arm drive nut
• Coast to park with adjustable right or left self parking
• Includes 5 amp fuse and holder (on/off switch not included)
• RF shielded circuitry
• Weight: 1.75 lbs (0.79kg)
• Shaft length: 2.5" (68mm), *includes 0.5" (13mm) length of
knurled arm fitting
• Measures approximately (L x W x D): 6.625" (168mm) x 3.375"
(86mm) x 2" (51mm)
• Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm)
• Stall current: 9.8 - 10.0 amps
1000 WATERPROOF
• No load current: 0.8 - 1.2 amps
Kit Contents:
Shaft*
Voltage Sweep
Part No.
• 6-11244 motor
2.5" (63mm)
12V
80°
6-11244
• 6-11341 10'' - 14'' arm
• 14'' polymer wiper blade
WIPER KIT
Part No. 6-11248
2.5 WATERPROOF WIPER MOTOR
• Fully sealed powder coated aluminium waterproof base and housing
• Powers a 26" (660mm) Deluxe arm and Deluxe blade combination or a
24" (609mm) Premier arm and Premier blade combination
• Shaft lengths: 1.5'' (38mm) or 2.5" (68mm), *includes 0.5" (13mm) length of
knurled arm fitting
• Factory pre-set sweep angles of 80°, with easy adjustment to 45° or 60°
• Chrome plated solid brass knurled drive nut with brass and
stainless steel drive shaft
• Two speed motor
• Sealed 6" wire leads, 16 AWG
• Adjustable right or left self parking
• 0.625" (16mm) diameter shaft
• Coast to park
• RF shielded circuitry
• Includes 6 amp fuse and holder (operating switch not included)
• Measures approximately (L x W x D): 7.875" (200mm) x 4.25" (108mm) x
3" (76mm) - see drawing
• Stall torque: 139 in-lbs (160 kgf/cm; 15.7 Nm)
• Stall current: 9.0 - 10.5 amps
• No load current: 1.0 -1.6 amps
Shaft*
1.5" (38mm)
2.5" (63mm)
Voltage
12V
12V
Sweep
80°
80°
Part No.
6-11261
6-11264
CATALOGUE SUPPLEMENT - I
31
Marinco AFI Wiper Motor,
Switch & Washer Kit
GENERAL BOAT EQUIPMENT - WIPERS
1.5 WATERPROOF WIPER MOTOR
• Fully sealed powder coated aluminium waterproof base and housing
• Powers a 22" (559mm) Deluxe arm and 22" (559mm) Deluxe blade combination or
a 20" (508mm) Premier arm and 20" (508mm) Premier blade combination
• Shaft length: 1.5'' (38mm) or 2.5" (68mm) (includes 0.5" (13mm) length of knurled arm fitting)
• Factory pre-set sweep angles of 80°, with easy adjustment to 45° or 60°
• Chrome plated solid brass knurled drive nut with brass and stainless steel drive shaft
• Two speed motor
• Sealed 6" wire leads, 16 AWG
• Adjustable right or left self parking
• 0.625" (16mm) diameter shaft
• Coast to park
• RF shielded circuitry
• Includes 5 amp fuse and holder (operating switch not included)
• Measures approximately (L x W x D): 7.75" (197mm)
x 4" (101mm) x 2.75" (70mm) - see drawing
• Stall torque: 109 in-lbs (125 kgf/cm; 12.3 Nm)
• Stall current: 11.5 - 13.0 amps
• No load current: 0.5 - 1.2 amps
• Replaces AFI 2000 motor
Shaft
1.5" (38mm)
2.5" (63mm)
Voltage Sweep
12V
80°
12V
80°
Part No.
6-11273
6-11274
INTELLIGENT WIPER SWITCH - SINGLE MOTOR
AFI’s new microcontroller based “intelligent” switch provides all necessary
wiper motor functions in one small component.
• Settings for two continuous speed functions and three intermittent speed
functions (2 second delay, 4 second delay, 8 second delay)
• Washer system operation function
• Blinking LED lights in switch indicate operating function
• Dual motor switch synchronizes both motors in each mode and deactivates
each motor individually
• Works with 12V or 24V DC motors
• Fits standard switch size openings, requires 2.65" (67.5mm) depth
• Includes one ten pole connector with female pins and two female quick-connects
ADD-ON WINDSHIELD WASHER KIT
• Can be used on new or existing AFI™
Deluxe wiper arm and blade sets
• Kit includes parts to outfit two wiper arms
• Sprayer fittings (kit includes two) each
have four adjustable brass nozzles to
provide maximum spray coverage for
most any windshield
• Plastic parts are numbered to make
installation easy
Part No. 6-11292
32
KIT INCLUDES:
• Water tank with mounting bracket
• 12 Volt pump motor
• Under deck tee fitting
• Thru deck fitting and hardware
• Below deck clear tubing (16 ft.)
• Above deck black tubing (6 ft.)
• Large and small rivet clips
• Wiper arm clips
• Sprayer fittings with clamps
CATALOGUE SUPPLEMENT - I
Part No. 6-11290
Marinco AFI Wiper
Blades & Arms
GENERAL BOAT EQUIPMENT - WIPERS
DELUXE ADJUSTABLE WIPER ARM
• All arms are stainless steel
• Arm has “articulating/bend-back” feature
• Motor shaft mounting has additional set screw clamping
Wet / Dry
Dry
Dry
Dry
Dry
Length
(adjustable)
6.75'' - 10.5'' (171 - 267mm)
10'' - 14'' (254 - 355mm)
14'' - 20'' (355 - 508mm)
18'' - 24' (457 - 609mm)
Stainless
Part No.
6-11340
6-11341
6-11342
–
Black
Part No.
–
6-11345
6-11346
6-11347
DELUXE STAINLESS
STEEL CURVED
WIPER BLADES
• Works well on curved or
flat windshields
POLYMER WIPER
BLADES
DELUXE ADJUSTABLE PANTOGRAPHIC ARM
• For Use with AFI™ 2.5, 1.5 and MRV Motors
• Stainless steel
• Arm has “articulating/bend-back” feature
• Motor shaft mounting has additional set screw clamping
Wet / Dry
Dry
Dry
Length
(adjustable)
12'' - 17'' (305 - 432mm)
17'' - 22' (432 - 559mm)
Stainless
Part No.
6-11350
6-11351
PREMIER PANTOGRAPHIC S/S WIPER ARM
• Combines the heavy-duty construction and materials of the Premier
wiper arm line with a built-in wet arm system that allows for a clean
and easy installation of a washer system
• A simple and easy way to keep your windshield clean, the Premier
wet arms feature a black PVC hose that runs up the center of the arm
and ends in a four-nozzle fixture that is an integral part of the wiper
arm itself
• Each solid brass nozzle is adjustable to provide a maximum coverage
spray pattern for most any windshield
• Black glass polyimpregnated
construction
• Marine-grade rubber squeegee
Length
11.5" (292mm)
14" (355mm)
16" (406mm)
18" (457mm)
20" (508mm)
Part No.
6-11311
6-11312
6-11313
6-11314
6-11315
Length
12" (305mm)
14" (355mm)
16" (406mm)
18" (457mm)
20" (508mm)
22" (559mm)
24" (609mm)
Part No.
6-11301
6-11302
6-11303
6-11304
6-11305
6-11306
6-11307
PREMIER S/S WIPER BLADE
• All stainless steel construction
Length
Part No.
• Marine grade silicone squeegee
20" (508mm)
6-11321
• Extra squeegee “claws” spread
pressure evenly over the length of the blade, allowing the blade to
conform to a curved windshield
For more Marinco products see
Section 8 of our catalogue.
Pantographic wiper arms will only function properly with wiper
motor sweep angles 80º or less.
Wet / Dry
Wet
Length
(adjustable)
17'' - 22'' (432 - 559mm)
Stainless
Part No.
6-11370
CATALOGUE SUPPLEMENT - I
33
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE HELICAL VHF ANTENNAS
HA156C HELIFLEX
5912 RUBBER DUCK
Part No. 6-09000
Part No. 6-09002
• Lightweight, low windage, compact
helical VHF antenna for short range
communications
• A favourite for racing yachts and
sports boats
• Integral aluminium masthead
mounting bracket
• 20m of RG-58 cable and PL-259
connector
• Antenna length: 0.15m (0.5ft)
• Gain: 1dB
MD 23N
• Lightweight, low windage, compact
helical VHF antenna for short range
communications
• Ideal for emergency or temporary
installations and particularly suitable
for cabin or console tops
• Attached and detaches with ease
using supplied flush mounting kit
• Gold plated connectors supplied
• Antenna length: 0.18m (0.6ft)
• Gain: 1dB
• Heavy-duty helical VHF antenna
for short range communications
• Ideal for sail and power boats to
withstand the most rugged
conditions
• Watertight, strong, lightweight
(0.3kg) construction
• Electronics are sealed in epoxy for
additional protection
• Fitted with ‘N’ Jack to allow
detachable cable (no bracket)
• Compatible with RG-58 cable
• Antenna length: 0.3m (1ft)
• Gain: 1dB
Part No. 6-09005
SHAKESPEARE STAINLESS STEEL VHF ANTENNAS
5215 SQUATTY BODY®
YWX WHIPFLEX™
• Stainless steel whip VHF antenna for sail boats
• Unique solderless watertight masthead
connector system for easy installation and
dismounting
• Lightweight - 0.15 kilo with bracket
• Includes 180mm cranked masthead nylon
mounting bracket
• 20m of RG-58 cable and PL-259 connector
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09010
• Stainless steel whip VHF antenna for
sail boats
• Lightweight and low profile
• Removeable whip
• SO-239 (UHF) connector in base
• Sealed, tin-plated copper wire coil
• Stainless steel “L” bracket supplied for
mast mounting or use optional 4716 or
4717 mast head mounts (p.44)
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09013
YHK HAWK™
6-09020
Detail
6-09011
6-09010
34
• Heavy-duty stainless steel whip ‘lift
and lay’ VHF antenna
• Ideal for sports fishing boats and
smaller power boats
• Simple to set up and lay down,
ensuring the antenna does not
obstruct when fishing or storing
the boat
• SO-239 (UHF) connector in base
• Whip is user replaceable
• Sealed, tin-plated copper wire coil
• Stainless steel “L” bracket supplied
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09020
• Stainless steel whip VHF antenna
with ‘Hawk’ windex for
sail boats
• Unique solderless watertight
masthead connector system for
easy installation and dismounting
• Lightweight - 0.15 kilo with bracket
• Includes 180mm flat masthead
nylon mounting bracket
• 20m of RG-58 cable and PL-259
connector
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09011
5247-A LIFT ‘N’ LAY
CATALOGUE SUPPLEMENT - I
6-09013
6-09020
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE STAINLESS STEEL VHF ANTENNAS
5216
5250 SKINNY MINI™
• Lightweight, black
stainless steel VHF
antenna for short range
communications
• Ideal for sports sailing
boats
• Gold plated connector
• ‘L’ bracket for mast top
mounting
• Antenna length:
0.3m (1ft)
• Gain: 1dB
• Compact, lightweight, stainless
steel whip VHF antenna
• Ideal for small power boats
• Sealed, tin-plated copper wire coil
• 4.5m of RG-58 cable plus PL-259
plug included. Requires a mount
with centre hole for cable
• Suggested mounts: 4187, 5187,
4188-S or 4190 (p.43)
• Chromed brass ferrule
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09019
Part No. 6-09021
YRR RIB RAIDER™
• Black (YRR) or White
(YRR-W), stainless steel
VHF antenna for short
range communications
• Designed to avoid snagging
and excessive whip action,
ideal for RIBs and high
speed craft
• Solderless connector
system for ease of installation
and removal
• Integral bracket with
mounting holes
• 8m of RG-58 cable with
PL-259 connector
• Antenna length: 0.48m (1.6ft)
• Gain: 1dB
5241-R
• Heavy duty stainless steel
whip VHF antenna
• Ideal for fast sports boats,
RIBs and small fishing boats
• Whip is user replaceable
• 4.5m of RG-58 cable plus
PL-259 plug included.
Requires a mount with
centre hole for cable
• Suggested mounts: 4187,
5187, 4188-S or 4190 (p.43)
• Chromed brass ferrule
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09025
Part No. 6-09022
(YRR - Black)
Part No. 6-09023
(YRR-W - White)
NEW
6-09023
6-09025
6-09021
6-09022
5911 THE STOWAWAY™
MD 20N
• Heavy duty stainless steel whip
VHF antenna
• Ideal for sail and power boats to
withstand the most rugged
conditions
• Watertight, strong, lightweight
(0.2kg) construction
• Electronics are sealed in epoxy for
additional protection
• Fitted with ‘N’ Jack to allow
detachable cable (no bracket)
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09026
• Short VHF whip antenna with flexible outer covering
• Ideal as a temporary, spare or emergency antenna
• Supplied with 3.6m of cable and PL-259 connector
• Rubber suction cup for easy mounting
• Velcro storage strips included
• Packed in a 50cm, weather resistant, retail plastic tube
• Antenna length: 0.25m (0.8ft)
• Gain: 1dB
Part No. 6-09030
6-09030
SL 156 SHORELINK™
• Emergency VHF antenna for instant set up if your main
antenna becomes broken or disabled
• Sealed in a waterproof 24cm weather resistant plastic tube
• Stored easily on bulkhead or in flare pack
• 6m of miniature coaxial cable (RG-174) with PL-259
connector fitted
• Compulsory for R.O.R.C. racing
• Antenna length: 0.4m (1.3ft)
• Gain: 1dB
6-09032
Part No. 6-09032
CATALOGUE SUPPLEMENT - I
35
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE FIBREGLASS VHF ANTENNAS
426-N
• White fibreglass VHF antenna
• Designed for high speed sports
boats and RIBs working in
rough conditions
• Quality copper cable elements for
good range and efficiency
• Includes 4.5m RG-58 cable and
PL-259 connector (not attached)
• Suggested mounts: 4186, 4721
or 4722 (p.43)
• Nylon ferrule
• Antenna length: 1.2m (4ft)
• Gain: 3dBi
Part No. 6-09040
5104 CENTENNIAL™
5400-XT / 5401-XT LITTLE GIANT™
• Durable, smooth, white fibreglass
VHF antenna with polyurethane
finish that will not yellow in the sun.
• A good looking and superb value
antenna, ideal for power and
work boats
• Brass and copper elements for
extra performance
• Includes 4.5m RG-58 cable and
PL-259 connector (not attached)
• Suggested mounts: 4187 or 5187
(p.43)
• Chromed brass ferrule
• Antenna length: 1.2m (4ft)
• Gain: 3dBi
• Heavy-duty, high gloss, smooth Galaxy white
(5400-XT) or black (5401-XT) fibreglass VHF
antenna with polyurethane finish that will not
yellow in the sun.
• Centre-fed 1⁄2 wave coaxial sleeve
• An outstanding, heavy-duty antenna, ideal for
power boats, work and fishing boats operating
in all types of conditions
• Brass and copper elements to maximise range
and performance
• 6m RG-8X ultra low loss cable and PL-259
connector (not attached)
• Matches 5420-XT / 5421-XT AM/FM
antennas (p.40)
• Suggested mounts: 4187 or 5187 (p.43)
• Stainless steel ferrule
• Antenna length: 1.2m (4ft)
• Gain: 3dBi
Part No. 6-09041
6-09040
6-09041
5400-XP
• Heavy-duty, high gloss, smooth
Galaxy white fibreglass VHF antenna
with polyurethane finish that will not
yellow in the sun
• “Silver Series” (extends
transmit/receive performance)
• Centre-fed 1⁄2 wave coaxial sleeve
• Exceptionally efficient performing,
heavy-duty antenna, ideal for serious
power boat, work and fishing boat
operators in all types of conditions
• Stranded high quality tinned copper
inner conductor maximises signal
strength, combined with the
copper and silver plated brass
elements will extend
performance and life
• 6m RG-8X ultra low loss cable
and PL-259 connector (not
attached)
• Suggested mounts: 4187 or
5187 (p.43)
• Stainless steel ferrule
• Antenna length: 1.2m (4ft)
• Gain: 3dBi
427-N & 427-N KIT
• Durable smooth gloss finished
white fibreglass VHF antenna
• Very good value, this antenna is
ideal for power and work boats
• Brass and copper elements for
extra performance
• Includes 6m RG-58 cable and
PL-259 connector (not attached)
• Matches 5350-N AM/FM antenna
(p.40)
• Suggested mounts: 4186 or 4721
or 495-B (p.43-44)
• Nylon ferrule
• Antenna length: 1.5m (5ft)
• Gain: 3dBi
Part No. 6-09050
• Durable smooth gloss finished
white fibreglass VHF antenna
• A very good looking antenna,
ideal for power and work boats
• Brass and copper elements for
extra performance
• Includes 6m RG-58 cable and
PL-259 connector (not attached)
• Matches 5350-S AM/FM antenna,
(p.40)
• Suggested mounts: 4187 or 5187
(p.43)
• Stainless steel ferrule
• Antenna length: 1.5m (5ft)
• Gain: 3dBi
Part No. 6-09051
427-N Kit as above but with 4186
nylon rachet mount supplied and
packaged in a box
Part No. 6-09052 (Kit)
6-09052
6-09051
Part No. 6-09045
6-09045
36
427-S
CATALOGUE SUPPLEMENT - I
6-09050
6-09043
6-09042
Part No. 6-09042 (5400-XT - White)
Part No. 6-09043 (5401-XT - Black)
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE FIBREGLASS VHF ANTENNAS
5206-N / 5206-C
• Economical, lightweight, white
fibreglass VHF antenna
• Attractive antenna for good
communications where range is
not a predominant factor, ideal for
power boat applications
• Quality copper cable elements for
good range and efficiency
• Includes 4.5m RG-58 cable and
PL-259 connector (not attached)
• 5206-N: Nylon ferrule. Suggested
mount 4186 (p.43)
• 5206-C: Chromed brass ferrule.
Suggested mount 4187 or 5187
(p.43)
• Antenna length: 2.4m (8ft)
• Gain: 6dBi
5206-BL-C
5101-S
• Economical, lightweight, black
fibreglass VHF antenna
• With an attractive black finish this
antenna is ideal for power boats
and for good communications
where range is not a predominant
factor
• Quality copper cable elements for
good range and efficiency
• Includes 4.5m RG-58 cable and
PL-259 connector (not attached)
• Suggested mounts 4187 or 5187
(p.43)
• Chromed brass ferrule
• Antenna length: 2.4m (8ft)
• Gain: 6dBi
• Durable, smooth, white gloss
fibreglass VHF antenna
• Good looking and excellent
value, ideal for power and work
boats
• Brass and copper elements for
extra performance
• Includes 6m RG-58 cable and
PL-259 connector (not attached)
• Twin to 5120-S AM/FM antennas
(p.41)
• Suggested mounts 4187 or 5187
(p.43)
• Stainless steel ferrule
• Antenna length: 2.4m (8ft)
• Gain: 6dBi
Part No. 6-09062
Part No. 6-09063
Part No. 6-09060 (5206-N)
Part No. 6-09061 (5206-C)
6-09062
Detail
6-09061
Detail
6-09060
5225-XT
• Heavy-duty, high gloss, smooth
Galaxy white fibreglass VHF
antenna with polyurethane finish
that will not yellow in the sun
• Collinear-phased 5/8 wave
elements
• An outstanding performing,
heavy-duty antenna, ideal for
power boats, work and fishing
boats operating in all types
of conditions
• Brass and copper elements to
maximise range and performance
• Includes 6m RG-8X ultra low
loss cable and PL-259 connector
(not attached)
• Matches 5235-XT AM/FM
antenna (p.41)
• Suggested mounts 4187 or 5187
(p.43)
• Stainless steel ferrule
• Antenna length: 2.4m (8ft)
• Gain: 6dBi
Part No. 6-09065
6-09063
Detail
6-09062
6-09061
6-09063
399-1
5225-XP
• Heavy-duty, high gloss, smooth Galaxy
white fibreglass VHF antenna with silver
plated elements and polyurethane finish
that will not yellow in the sun
• “Silver Series” (extends
transmit/receive performance)
• Collinear-phased 5/8 wave elements
• Exceptionally efficient, heavy duty
antenna, ideal for superyachts, work
and fishing boat operators requiring
extended communications in all types
of conditions
• Stranded high quality tinned copper
inner conductor maximise signal
strength, combined with the copper
and silver plated brass elements will
provide extended performance and life
• Includes 6m RG-8X ultra low loss cable
cable and PL-259 connector (not
attached)
• Suggested mounts 4187 or 5187 (p.43)
• Stainless steel ferrule
• Antenna length: 2.4m (8ft)
• Gain: 6dBi
• Heavy-duty, smooth, two-sectioned
white gloss fibreglass VHF antenna
• Collinear phased 5/8 wave with
two coaxial chokes to suppress
cable radiation
• A highly efficient, professional
quality antenna combining strength
and performance
• Brass and copper elements
• 4.5m RG-58 cable and PL-259
connector (not attached)
• 2 sections: base 1.9m, tip 1m
• Suggested mounts 409-R or 410-R
for deck or side mounting (p.44)
• Chromed brass ferrule
• Antenna length: 3m (9.6ft)
• Gain: 6dBi
Part No. 6-09070
Mount not
included.
6-09070
Part No. 6-09068
6-09065
6-09068
CATALOGUE SUPPLEMENT - I
37
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE FIBREGLASS VHF ANTENNAS
5399
• Heavy-duty, high gloss, smooth
Galaxy white, two section fibreglass
VHF antenna with polyurethane finish
that will not yellow in the sun
• Collinear phased 5/8 wave with two
coaxial chokes to suppress cable
radiation
• Strong, sturdy and self supporting,
providing exceptional performance for
commercial, fishing and leisure
applications in all conditions
• Brass and copper elements for
maximum range and efficiency
• 6m RG-8X ultra low loss cable and
PL-259 connector (not attached)
• 2 sections: base 1.9m, tip 1m
• Suggested mount 410-R mounting kit
(p.44)
• Stainless steel ferrule
• Antenna length: 3m (9.7ft)
• Gain: 6dBi
Part No. 6-09072
SHAKESPEARE SSB / HF
ANTENNA
5230
• Heavy-duty, high gloss, smooth
Galaxy white, two sectioned white
fibreglass VHF antenna with
polyurethane finish that will not yellow
in the sun
• 5/8 wave over 1⁄2 wave dipole.
The most effective 8dB antenna
system available
• Outstanding antenna, ideal for
commercial, fishing and superyacht
applications in all conditions
• Brass and copper elements for
maximum range and efficiency
• 6m RG-8X ultra low loss cable and
PL-259 connector (not attached)
• 2 sections: base 2.4m, tip 1.9m
• Suggested mounts 409R or 410-R
mounting kit (p.44)
• Stainless steel ferrule
• Antenna length: 4.3m (14.1ft)
• Gain: 8dBi
6-09073
SHAKESPEARE SPECIALITY COMMERCIAL VHF ANTENNAS
MD 70
MD 7A
• Extra heavy-duty, white, tapered,
mast or rail mount, end-fed
fibreglass antenna
• Ideal for work boats and fishing
vessels working in the toughest
environments
• Brass and copper elements for
improved performance
• Integral, cast aluminium mounting
base with white gloss finish
• Mounts easily to rail and masts
using supplied U bolts
• 1m RG213 with N Jack
• Aluminium ferrule
• Antenna length: 1.5m (4.9ft)
• Gain: 3dBi
• Extra heavy-duty, mast mount,
white fibreglass dipole antenna
• Ideal for the extreme conditions
found on fishing vessels in the
North Sea type of environment and
on dhows in the Indian Ocean
• Aluminium and copper elements
for improved performance
• Supplied with extra heavy-duty
galvanised steel clamp set for
mast mount
• 1m RG213 with N Jack
• Antenna length: 1.6m (5.2ft)
• Gain: 3dBi
Part No. 6-09083
Part No. 6-09082
6-09082
38
6-09083
CATALOGUE SUPPLEMENT - I
• Heavy-duty, smooth gloss, white,
three section, fibreglass SSB antenna
• Permanently sealed full length
conductors with no loading coil
• Reinforced insulation to allow power
up to 1kW
• Excellent value, this award winning
antenna is a high performing HF
communicator
• Side termination band
• 3 sections: base 2.3m, middle 2.3m,
tip 2.3m
• Suggested mounts 409R or 410-R
mounting kit (p.44)
• Chromed brass ferrule
• Antenna length: 7.0m (23ft)
• Gain: 1kW
Part No. 6-09104
Mount not
included.
Part No. 6-09073
6-09072
393
6-09104
For Antenna Mount
Accessories, see
pages 43 & 44
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE AIS ANTENNAS
HA 156C-AIS
• Lightweight, low windage,
compact helical AIS antenna
• A favourite for racing yachts
and sports boats
• Integral aluminium
mounting bracket
• 20m of RG-58 cable and
PL-259 connector
• Antenna length: 0.15m (1ft)
• Gain: 1dBi
Part No. 6-09120
MD 23-AIS
• Extra heavy-duty helical AIS antenna
for short range communications
• Ideal for sail and power boats to
withstand the most rugged conditions
• Watertight, strong, lightweight (0.3kg)
construction
• Electronics are sealed in epoxy for
additional protection
• Supplied with 20m RG-58 cable plus
PL-259 connector and 180mm
aluminium bracket
• Antenna length: 0.3m (1ft)
• Gain: 1dB
Part No. 6-09121
5215-AIS SQUATTY BODY®
• Stainless steel whip AIS antenna for
sail boats
• Strong, lightweight and low profile
antenna with removeable whip
• SO-239 (UHF) connector in base
• Sealed, tin-plated copper wire coil for
performance and reliability
• Stainless steel “L” bracket supplied
for mast mounting or use optional
4716 or 4717 mast head mounts
(p.44)
• Matches 5215 (VHF)
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09125
6-09120
6-09121
5250-AIS SKINNY MINI™
• Compact, strong, lightweight,
stainless steel whip AIS
antenna
• End fed 1⁄2 wave stainless steel
whip with chrome plated brass
canister
• Ideal for small power boats
• Matches 5250 (VHF)
• 4.5m of RG-58 cable plus
PL-259 plug. Requires a mount
with centre hole for cable
• Suggested mounts: 4187,
4188-S (p.43)
• Chromed brass ferrule
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09126
AIS-MAST
• Heavy-duty stainless steel
whip AIS antenna
• Ideal for sail and power
boats to withstand the
most rugged conditions
• Watertight, strong,
lightweight (0.2kg)
construction
• Electronics are sealed in
epoxy for additional
protection
• Matches YWX (VHF)
• 20m RG-58 cable plus
PL-259 connector and
180mm nylon
cranked bracket
• Antenna length: 0.9m (3ft)
• Gain: 3dBi
Part No. 6-09127
6-09126
Detail
6-09125
5396-AIS LITTLE
GIANT™
• Heavy-duty, high gloss,
smooth, Galaxy white,
fibreglass VHF antenna with
polyurethane finish that will
not yellow in the sun
• End-fed 1⁄2 wave coaxial
sleeve
• Specially designed for AIS
systems, ideal for power
boats, work and fishing
boats operating in all types
of conditions
• Brass and copper elements
to maximise range and
performance
• 6m RG-8X ultra low loss
cable and PL-259 connector
(not attached)
• Suggested mounts 4187 or
5187 (p.43)
• Stainless steel ferrule
• Antenna length:
1.2m (3.9ft)
• Gain: 3dBi
AIS-COM
• Heavy-duty, mast mount,
white fibreglass dipole AIS
antenna
• Specially designed for the
extreme conditions found
on fishing vessels in the
North Sea type of
environment and on dhows
in the Indian Ocean
• Aluminium and copper
elements for improved
performance
• Supplied with extra heavyduty galvanised 4715 steel
clamp set for mast mount
• 1m RG213 with N Jack
• Antenna length: 1.6m (5.2ft)
• Gain: 3dBi
Part No. 6-09134
Part No. 6-09130
6-09127
6-09126
6-09130
6-09134
CATALOGUE SUPPLEMENT - I
39
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE AM / FM ANTENNAS
4351
YRR AM/FM RIB RAIDER™
4350
• Black stainless AM/FM antenna
• Designed to avoid snagging and
excessive whip action, ideal for RIBs
and high speed craft
• Matches YRR (VHF)
• Integral black bracket with
mounting holes
• 4.5m of RG-62 cable with Motorola
type connector
• Antenna length: 0.48m (1.6ft)
• White fibreglass AM/FM antenna
• Features Shakespeare’s
exclusive distribution load for
improved reception
• Integral polycarbonate Lift and
Lay mount
• 3m of RG-62 cable with Motorola
type plug
• Nylon ferrule
• Antenna length: 1.0m (3.3ft)
Part No. 6-09141
Part No. 6-09143
• White fibreglass AM/FM antenna
• Features Shakespeare’s exclusive
distribution load for improved
reception
• 3m of RG-62 cable with Motorola
type plug
• Suggested mount style 4186 (p.43)
• Nylon ferrule
• Antenna length: 1.0m (3.3ft)
Part No. 6-09142
6-09143
6-09141
6-09142
5350-N
5420-XT / 5421-XT
LITTLE GIANT™
• Durable, smooth, gloss finished,
white fibreglass AM/FM antenna
• Good performance AM/FM
antenna, ideal for power and
work boats
• Includes 4.6m RG-62 cable plus
Motorola plug attached
• Matches 427-N VHF antenna
• Suggested mounts: 4186 (p.43)
• Nylon ferrule
• Antenna length: 1.5m (5ft)
• Heavy-duty, high gloss,
smooth Galaxy white (5420XT) or black (5421-XT)
fibreglass AM/FM antenna
with polyurethane finish that
will not yellow in the sun.
• An outstanding, heavy-duty
antenna, ideal for power
boats, work and fishing boats
operating in all types of
conditions
• Copper elements to maximise
range and performance
• 3.7m RG-62 coax cable plus
Motorola connector attached
• Matches 5400-XT / 5401-XT
(VHF), (p.36)
• Suggested mounts: 4187 or
5187 (p.43)
• Stainless steel ferrule
• Antenna length: 1.2m (4ft)
Part No. 6-09146
5350-S
• Durable, smooth, gloss finished,
white fibreglass AM/FM antenna
• A good looking and well
performing AM/FM antenna,
ideal for power and work boats
• Includes 4.6m RG-62 cable plus
Motorola plug attached
• Matches 427-S VHF antenna
• Suggested mounts: 4187 or
5187 (p.43)
• Stainless steel ferrule
• Antenna length: 1.5m (5ft)
Part No. 6-09147
6-09147
Detail
Part No. 6-09145
(5420-XT - White)
6-09146
Detail
6-09144
6-09145
Part No. 6-09144
(5421-XT - Black)
6-09147
6-09146
40
CATALOGUE SUPPLEMENT - I
NOTE: SHAKESPEARE DOES NOT RECOMMEND
CABLES RUN LONGER THAN 7.6m WITH AM/FM
ANTENNA SYSTEMS.
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE AM / FM ANTENNAS
5120-S
5235-XT
• Heavy-duty, high gloss, smooth
Galaxy white fibreglass AM/FM
antenna with polyurethane finish
that will not yellow in the sun
• Copper elements to maximise
reception ranges
• An outstanding performing, good
looking, heavy-duty AM/FM
antenna, ideal for power boats,
and superyachts operating in all
types of conditions
• 6m RG-62 cable plus Motorola
plug attached
• Matches 5225-XT (VHF)
• Suggested mounts 4187 or 5187
(p.43)
• Stainless steel ferrule
• Antenna length: 2.4m (8ft)
• Durable, smooth gloss finished,
white fibreglass AM/FM antenna
• A good looking and well
performing AM/FM antenna ideal
for power boats
• Includes 4.6m RG-62 cable plus
Motorola plug attached
• Matches 5101-S VHF antenna
• Suggested mounts 4187 or 5187
(p.43)
• Stainless steel ferrule
• Antenna length: 2.4m (8ft)
4357-S
• VHF to AM/FM converter
• For use with VHF antennas where a separate
AM/FM antenna is not practical
• Ideal for sail boat applications
• Does not affect or interfere with the VHF
performance
• 3m RG-62 cable with Motorola plug (attached) plus
0.9m RG-58 cable for connection to VHF
Part No. 6-09150
Part No. 6-09149
6-09150
Part No. 6-09148
6-09149
6-09148
SHAKESPEARE LOUD SPEAKERS AND HAILERS
WS200-P
HS-5
• Weatherproof Deck Watch Loud Speaker
• Can be surface or flush mounted
• UV Resistant ABS construction
• Can be used on 4 or 8 ohm systems
• Overall diameter 14cm, depth 5cm
• Hole diameter of 11.6cm for flush mounting
• Output 5 watts, Impedance 8 ohms
• Weight 0.3 kilo • Blister packed
Part No. 6-09200
ES-2
• 5.7cm external speaker with Mylar cone
in a compact white housing
• 4 ohm speaker, 5 watts (RMS) input
• Rachet action mounting bracket
• 1.8m cable and 3.5mm phono plug
Part No. 6-09202
ES-4
• External Horn Speaker
• 12.7cm white plastic horn speaker
• 4 ohm speaker, 15 watts
(RMS) input
Part No. 6-09208
ES-4P
• 10cm deluxe speaker with Mylar cone in white
plastic case for protection against moisture
• 4 ohm speaker, 8 watts (RMS) input
• Swivel mounting bracket
• 1.8m cable with 3.5mm phono plug
Part No. 6-09204
• Same as ES-4 plus built in amplifier for
volume control
• Switchable attenuator to prevent overload
• Max audio level to 94dBA
• 3.5mm plug for audio input
• 12V DC Operation
Part No. 6-09205
CATALOGUE SUPPLEMENT - I
41
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE ANYWHERE™ TV ANTENNAS & ACCESSORIES
Shakespeare AnyWhere™ HDTV antennas have been designed to
the highest specification to bring the best possible signal to your TV,
either on board, in a caravan or at home.
• Receives digital and terrestrial TV signals (DVB-T, ISDB-T, DMBT/H, ATSC) and DAB/FM radio
• Waterproof and weatherproof housing - made of UV resistant,
injection moulded ASA material for long term durability
42
• Omnidirectional reception - receives VHF, UHF, and FM signals
through 360º
• Built in high gain and low noise amplifier, shielded for minimum interference
• The use of SMD technology and micro electronics in the amplifier ensures
outstanding performance
• LTE filter is incorporated to eliminate interference from 4G mobile
communications
SA-HDTV-INDR1 AnyWhere Marine HDTV 8''
SA-HDTV-MAR8 AnyWhere Marine HDTV 8''
• 190W x 120H x 22D mm Indoor & Portable
HDTV antenna (with built-in LTE filter).
• Newly designed using the latest TV
technologies
• Attractive, gloss black, compact and
slim-line, indoor portable HDTV antenna.
Comes with built in high gain, low noise
amplifier and LTE filter. Ideal indoors and
below decks
• Set of screws and suction cups
• USB cable
• IEC to F connector
• AC/DC power adaptor (UK/EURO)
• Receiving range FM/VHF/UHF (VHF:87.5 – 230MHz UHF: 470-862)
• Gain: 28dB / Noise figure: 3dB
• Max. output level: 100 dBµV / Impedance: 75Ω
• Outputs: x 2 TV’s
Part No. 6-09160
• 203H x 110W mm (8'' x 4.3'') Omni Directional
HDTV antenna (with built-in LTE filter)
• Newly designed using the latest TV technologies
• Compact, lightweight, weatherproof HDTV
antenna. Comes with built in high gain, low noise
amplifier and LTE filter. Ideal for small power
boats and sail boats
• Includes amplifier gain control unit
• 10m 75 Ohm RG59 cable with 2 x F connectors
+ IEC to F connector
• 1.5m adapt cable fitted with F plug to IEC
• Power 12/24V DC - AC/DC power adaptor (UK/EURO) included
• Receiving range FM/VHF/UHF (VHF:87-230MHz UHF: 470-862)
• Gain: 30dB / Noise figure: 3dB
• Max. output level: 110 dBµV / Impedance: 75Ω
• Outputs: x 2 TV’s
• Fits to standard 1''-14 threaded mount
Part No. 6-09162
SA-HDTV-MAR10 AnyWhere Marine HDTV 10''
SA-HDTV-MAR14 AnyWhere Marine HDTV 14''
• 240mm (10'') Omni Directional HDTV antenna (with built-in LTE filter)
• Newly designed using the latest TV technologies
• Compact, lightweight, white ASA, weatherproof HDTV antenna. Comes
with built in high gain, low noise amplifier and LTE filter. Ideal for small
power boats and sail boats
• Includes amplifier gain control unit
• 25m 75 Ohm RG59 cable with 2 x F connectors + IEC to F connector
• 1.5m adapt cable fitted with F plug to IEC
• Power 12/24V DC - AC/DC power
adaptor (UK/EURO) included
• Receiving range FM/VHF/UHF
(VHF:87-230MHz UHF: 470-862)
• Gain: 30dB / Noise figure: 3dB
• Max. output level: 110 dBµV / Impedance: 75Ω
• Outputs: x 2 TV’s
• Fits to 1''-14 threaded mount
Part No. 6-09164
• 380mm (14'') Omni Directional HDTV antenna (with built-in LTE filter)
• Newly designed using the latest TV technologies
• Compact, white ASA, weatherproof HDTV antenna. Comes with built in
high gain, low noise amplifier and LTE filter. Ideal for power boats and
work boats
• Includes amplifier gain control unit
• 25m 75 Ohm RG59 cable with 2 x F connectors + IEC to F connector
• 1.5m adapt cable fitted with F plug to IEC
• Power 12/24V DC - AC/DC power adaptor (UK/EURO) included
• Receiving range FM/VHF/UHF
(VHF:47-230MHz UHF:
470-862)
• Gain: 30dB / Noise figure: 3dB
• Max. output level: 110 dBµV / Impedance: 75Ω
• Outputs: x 2 TV’s
• Fits to 1''-14 threaded mount
Part No. 6-09166
4366 SAILBOAT TV ANTENNA MAST MOUNT
TV-4S 4 WAY TV SPLITTER
Aluminium mast mount supplied with a 1'' - 14 thread fitting
for SA-HDTV-MAR8, MAR10 or MAR14 Part No. 6-09171
• 4 Way splitter for TV antennas
• Operating band 5MHz - 1000MKz
• Isolation >22dB, damping 6.9 - 8.0dB,
75Ω Impedance
• Die cast aluminium construction
• Connector type: F connectors
CATALOGUE SUPPLEMENT - I
Part No. 6-09172
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE ANTENNA DECK MOUNTS
4186 NYLON RACHET MOUNT
4187 S/STEEL RACHET MOUNT
• Four-way nylon rachet mount with handle, for
deck or side mounting
• Standard 1''-14 thread
• Quick release lever allows antenna fold-down
• For antennas up to 2.4m in self support mode
• Stainless steel four-way swivel rachet mount
• Standard 1''-14 thread
• Quick release lever allows antenna fold-down
• Slot centre feed
• Sturdy construction, quality finish
Part No. 6-09250
Part No. 6-09251
5187 S/STEEL RACHET MOUNT
• Sleek s/steel four-way swivel rachet mount
• Fine angle control (5 degree steps)
• Standard 1''-14 thread
• Quick release lever allows antenna fold-down
• Slot centre feed
• Highly polished finish
Part No. 6-09252
4711 NYLON 25mm FLANGE MOUNT
4710 S/STEEL 25mm FLANGE MOUNT
• Heavy duty, 25mm high mount
• 70mm diameter base
• Ideal for GPS, marine TV and fibreglass
antennas up to 1.5m
• Standard 1''-14 thread (male)
Part No. 6-09253
4365 S/STEEL 110mm FLANGE MOUNT
• Moderate duty, low profile 25mm high mount
• 70mm diameter base
• Ideal for GPS, marine TV and fibreglass
antennas up to 1.5m
• Standard 1''-14 thread (male)
• Stainless steel fixed base mount
• Standard 1''-14 thread
• 100mm high mount, 75mm dia. base
• Ideal for fitting to radar arches
• Excellent for GPS & marine TV antennas
Part No. 6-09254
Part No. 6-09255
SHAKESPEARE ANTENNA RAIL MOUNTS
4188-S RAIL RACHET MOUNT
4188-SL RAIL RACHET MOUNT
• Stainless steel rachet rail mount
• Quick release lever for quick, easy lay down
• Side slot for cable feed
• For 22 / 25mm vertical and horizontal rails
• For antennas up to 2.4m in self support mode
• Stainless steel rachet rail mount
• Quick release lever for quick, easy lay down
• Side slot for cable feed
• For 25 / 38mm vertical or horizontal rails
• For antennas up to 2.4m in self support mode
Part No. 6-09260
Part No. 6-09261
4190 RAIL RACHET MOUNT
4721 NYLON RAIL MOUNT
• Stainless steel rail rachet mount
• Quick release lever allows antenna fold-down
• Side slot for cable feed
• Suitable for 22mm or 25mm vertical, horizontal
or angled rails
• For antennas up to 2.5m in self support mode
Part No. 6-09262
• Nylon rachet rail mount
• Attaches to 22mm / 25mm vertical,
horizontal and angled rails. Lever action 1''-14 thread
• Has hole for coax cable pass-through
4722 PLASTIC RAIL MOUNT
4720 S/STEEL RAIL MOUNT
• Sturdy plastic rail mount
• Attaches to 22mm & 25mm horizontal rails,
1''-14 thread
• Slot cable feed
• Stainless steel rail and bulk head mount
• This clever design allows a neat fit to 22, 25
and 32mm square or round rails
• Fits vertical or horizontal rails and flat surfaces
• Complete with nylon adapters
Part No. 6-09264
Part No. 6-09263
Part No. 6-09265
CATALOGUE SUPPLEMENT - I
43
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE MOUNTS, BRACKETS & ACCESSORIES
495-B LIFT ‘N’ LAY MOUNT
4716 STAND-OFF MAST BRACKET
• Nylon Deck Mount
• Enables antenna to lift ‘n’ lay with positive
snap action
• Levelling plate included for mounting to a
sloping deck
• Standard 1''-14 thread (male)
• Includes 3/8''-24 thread brass insert
• Durable plastic angled mast mount /
stand-off bracket
• Mounting screws not included
• 12.7cm high x stand-off
distance: 20cm
Part No. 6-09270
Part No. 6-09256
4717 MAST TOP BRACKET
YBR
ADAPT3 / ADAPT4
• Flat plastic bracket attaches to the top of a
mast for mounting Shakespeare’s low-profile,
base-loaded antennas
• Mounting screws not included
• Attaches easily to any flat, horizontal surface
• Dimensions (mm): 9.5 high x 45 wide x 200 long
• Right angle bracket as supplied with the RIB
Raider (p35 or p40)
• Black, aluminium
• Screws supplied
• 16mm diameter hole
• ADAPT3: Adapts SO-239 (UHF) male to 1'' x 14
TPI female thread (chrome plated brass) (converts 5215 & 5247 antennas to 1'' x 14 TPI)
Part No. 6-09283
Part No. 6-09273
Part No. 6-09271
• ADAPT4: Adapts M16 male to 1'' x 14 TPI
female thread - (converts YRR, YWX, YHK
antennas to 1'' x 14 TPI) Part No. 6-09284
SHAKESPEARE COMMERCIAL ANTENNA MOUNTS
4715 MOUNTING CLAMPS
• Galvanised steel mounting clamps for
mast mount
• Size: 260 x 40mm
• Aerial / Pole size: 25mm - 50mm dia.
• Supplied with rubber inserts
• For MD 7A (p.38)
Part No. 6-09305
410-R HEAVY DUTY
MOUNTING KIT
• Combines the 81-S s/s swivel mount
with the 408-R moulded upper bracket
• Insert to accept 25mm, 28mm, or 38mm
diameter antennas or extension masts
Part No. 6-09309
AHDVM HEAVY DUTY
VERTICAL MOUNT
• Stainless steel heavy duty, vertical
mount / pole mount with ‘U’ bolts and
nuts 1''-14 thread
• 90 x 90mm backing plate
• 120mm total height
Part No. 6-09311
409-R HEAVY DUTY
MOUNTING KIT
• Combines 407 and 408-R together
• 407 is a heavy duty chrome plated
brass swivel mount bracket. For deck or
side mounting
• 408-R is a white moulded heavy duty
plastic insulated stand off bracket
• Insert to accept 25mm, 28mm, or 38mm
diameter antennas or extension masts
Part No. 6-09315
44
CATALOGUE SUPPLEMENT - I
Shakespeare Antennas
GENERAL BOAT EQUIPMENT - ANTENNAS
SHAKESPEARE SWITCHES & TESTERS
4700 SERIES EXTENSION
MASTS (Heavy Duty)
AS-2 VHF AUTOMATIC SWITCH
ART-3 VHF TEST METER
• Automatic switch toggles two radios to one antenna
• When you transmit on one radio, it switches the
antenna to it automatically
• The radio stays locked onto the antenna, until the
switch detects a transmit from the other radio. Easy!
• Test receiver function
• Output power and VSWR (antenna
efficiency)
• Internal battery or 12V DC
Part No. 6-09322
Part No. 6-09323
• Heavy-duty stainless steel
extension mast
• Male upper, female lower 1''-14
threads
• Excellent for clearing an
obstruction
• One Section
• Stainless steel ferrule
Length
15cm
30cm
60cm
Part No.
6-09220
6-09221
6-09222
SHAKESPEARE ANTENNA SPARES & CABLE ACCESSORIES
ACC105 DECK PLUG
AND SOCKET
ACC106 DECK PLUG
AND SOCKET
ACC108 THRU DECK
GLAND
• Deck plug and socket
for RG-58 coaxial cable
with N type connectors,
shroud and screws
complete with 2
protective caps
• Blister packed
• Deck plug and socket
for RG-213 coaxial
cable with N type
connectors, shroud and
screws complete with
protective cap
• Blister packed
• Thru Deck Gland for
RG-58 and RG-2113
cable complete with
stainless steel screws
• Blister packed
Part No. 6-09340
Part No. 6-09341
ACC156 BNC JACK AND
PLUG AND RG-58
SHROUD KIT
• Contains:
1x BNC Plug
1x BNC Jack
2x RG-58
Shrouds
• Blister packed
Part No. 6-09342
Part No. 6-09343
NEW
ACC 158
SOLDERLESS
CABLE
TERMINATION
KIT
NEW
COAXIAL
ANTENNA
CABLE
CENTERPIN
PL-258-CP-G SERIES
CENTERPIN
PL-259-CP-G SERIES
• The easy way to splice coax for splicing
RG-58 A/U, RG-8/X
• No soldering or pairing back
• For RG-58 A/U, and RG-8/X
coaxial cable
• For installing a PL-259 connector
• No soldering or pairing back
Part No. 6-09350
Part No. 6-09351
100m reel of
RG-58 Ohm
Coaxial Cable
Part No. 6-09333
• For solderless
terminations on the
Hawk, Whipflex
and Raider
• Blister Packed
Cross section
Part No. 6-09344
SHAKESPEARE SPARES
YWA
YHA
YHI
Spare antenna for YWX Whipflex Part
No. 6-09010 (p.34)
Part No. 16-09010-1
Spare antenna for YHK Hawk Part No.
6-09011 (p.34)
Part No. 16-09011-1
Replacement wind indicator for YHK Hawk
Part No. 6-09011 (p.34)
Part No. 16-09011-2
CATALOGUE SUPPLEMENT - I
45
Shakespeare Reflective
Dock Line & Fuel Additives
GENERAL BOAT EQUIPMENT- DOCKLINE
NEW RANGES
SHAKESPEARE REFLECTIVE NYLON DOCKLINE
This reflective line has a built in tracer which
helps when the sun is going down or has yet to
come up. The ropes come with a loop on one
end for quick and easy docking.
• Comes with reusable storage strap: great
for organizing & prolonging the life of
dock line
• Eye catching reflective accents
• Exposed rope for tactile experience
The different lengths of reflective rope are for
different boat lengths, as shown in the table.
Double Braided Nylon Dockline
For Boats Up To
25ft (7.6m)
35ft (10.6m)
45ft (13.7m)
Dia. x Length of Rope
⁄8 '' (9.5mm) x 15ft (4.5m)
1
⁄2 '' (12.7mm) x 25ft (7.6m)
5
⁄8 '' (15.8mm) x 25ft (7.6m)
3
White
6-00996
6-00997
6-00998
Red
6-00999
6-01000
6-01001
Black
6-01002
6-01003
6-01004
Double Braided Polypropylene Dockline
For Boats Up To
20ft (6.1m)
Dia. x Length of Rope
⁄8 '' (9.5mm) x 20ft (6m)
3
Blue
6-01005
BOAT CONSUMABLES - FUEL ADDITIVES
Marine engines are subjected to some of the harshest and most demanding environments imaginable, and recent changes
in the chemical formulations of marine fuels have introduced a new level of adversity to an already taxed service life.
Shakespeare® Marine's specifically formulated marine fuel additives repair and prevent fuel-related lost engine
performance in both petrol and diesel marine engines.
ETHANOL SHIELD
FUEL ADDITIVE
REPAIR MECHANIC
IN A BOTTLE FUEL
TREATMENT
This year round fuel stabilizer
is used for 2 & 4 cycle marine
engines and treats all
gasoline blends.
This marine formula prevents
ethanol related problems. It
displaces water common in
marine engines, prevents
corrosion, provides easy
engine starting and keeps
stored fuel fresh. It also
reduces heat to extend the
life of the engine.
• Gasoline Fuel Stabilizer
• All Gasoline Blends
• Protects Entire Fuel System
• Reduces Heat
• Reduces Emissions
• Keeps Stored Fuel Fresh
DIESEL MECHANIC
IN A BOTTLE FUEL
TREATMENT
This synthetic fuel additive works
in poor or non-running marine
engines as a complete fuel
system cleaner.
Without removing the carburetor
it removes all the varnish in the
fuel system avoiding costly
repairs. It removes carbon
deposits, displaces water,
reconditions
rubber and plastic components
and revitalizes old fuel.
This ultra-concentrated diesel
fuel stabilizer is engineered to
protect your entire marine fuel
system from problems caused
by Diesel and bio-Diesel
blended fuels.
It cleans injectors and pumps,
improves lubricity, disperses
water and removes sludge.
• Quickly Repairs Engine
• Repairs Ethanol Fuel Problems
• Restores Old Decayed Fuel
• Breaks Down Carbon Deposits
• Adds an Octane Booster
• Diesel Fuel Stabilizer
• Bio-Diesel Protection
• Keeps Entire Fuel System Clean
• Reduces Emissions
• Reduces Smoke
Treats up to 76 Litres
Treats up to 300 Litres
Treats up to 300 Litres
Size
236.6ml (8oz)
236.6ml (8oz)
46
Qty
9
each
Part No.
5-32001
5-32001/1
Size
236.6ml (8oz)
236.6ml (8oz)
CATALOGUE SUPPLEMENT - I
Qty
9
each
Part No.
5-32004
5-32004/1
Size
236.6ml (8oz)
236.6ml (8oz)
Qty
9
each
Part No.
5-32007
5-32007/1
Riptide
Cleaning Products
BOAT CONSUMABLES - CLEANING PRODUCTS
RIPTIDE INTERIOR
ALL-SURFACE
CLEANER
• Cleans GRP, Gel coat and all
hard washable surfaces.
• Contains no solvents or CFC’s
• Leaves no residue of
unnecessary chemicals.
• Exceeds legal requirements
for biodegradability
• Safe to marine life when
used as instructed.
• Suitable on all washable surfaces, GRP, Gel
coat, laminates.
• Conforms to EU Directive on Biodegradability.
500ml Part No. 5-81328
• Cuts through grease and grime
• Non-Toxic, food safe for
galley surfaces
• Chrome-friendly
• Contains no solvents or CFC’s
• No residue of unnecessary
chemicals
• Exceeds legal requirements
for biodegradability
• Safe to use, minimum impact on aquatic life.
• Suitable for galley and heads surfaces, plastics,
GRP, shower rooms, basins acrylic and chrome.
• Conforms to EU Directive on Biodegradability.
500ml Part No. 5-81329
RIPTIDE HULL AND DECK
MAINTENANCE SHAMPOO
RIPTIDE 3 IN 1 TOILET CLEANER
• Cleans GRP, Gel coat and
all hard washable surfaces
• Contains no solvents
or CFC’s
• Leaves no residue of
unnecessary chemicals.
• Exceeds legal
requirements for
biodegradability
• Safe to marine life when
used as instructed
• Conforms to EU Directive on Biodegradability
• Sodium Chloride Free
1 Litre Part No. 5-81331
• Triple action: cleans,
decalcifies and freshens
exposed surfaces
• Lubricates moving parts
and seals
• Promotes bio-degrading
action in holding tank
• Hygienic, naturally powerful
and safe to use
• Exceeds legal requirements
for biodegradability
• Minimum impact on aquatic life
• Suitable for septic holding tanks
500ml Part No. 5-81333
RIPTIDE PORTHOLE
AND GLASS
CLEANER
NEW RANGE
RIPTIDE EXTERIOR
MULTIPURPOSE
CLEANER
• A smear and streak free
formulation ideally suited to
days marine environment
• Spray directly on to glass or
mirror and wipe off with
paper towel until dry
300ml Part No. 5-81330
RIPTIDE ECO-FRIENDLY
GRP POLISH
• Gently buffs and polishes to a
brilliant shine without scratching
• Totally safe on all marine
materials
• Suitable for all kinds of
surfaces. GRP, hulls,
decks and super
structure, Gel Coat,
Cookers, fridges, enamel,
stainless steel & chrome
300ml Part No. 5-81332
RIPTIDE WATER PROOFER
• A specially developed
formulation of water based
waxes and polymers to
provide a Water Proofer
ideally suited to the marine market
• Safe to apply directly on to spray
covers, sail covers,
clothing etc.
• Please note: NOT a
permanent water proofer
300ml Part No. 5-81334
RIPTIDE WIPE CLEAN GRP CLEANING POWDER
• A versatile cleaner to remove stubborn stains
on all GRP surfaces
• Will remove algae and rust staining
850g Part No. 5-81335
RIPTIDE FULL ECO-VALET KIT
RIPTIDE INTERIOR ECO-VALET KIT
RIPTIDE EXTERIOR ECO-VALET KIT
Supplied in a PVC drawstring bag containing:
• 1 litre Hull and Deck Shampoo
• 500ml Exterior Multipurpose Cleaner
• 500ml Interior All Surface Cleaner
• 500ml 3 in 1 Toilet Cleaner
• 300ml Porthole and Glass Cleaner
• Sponge
Part No. 5-81325
Supplied in a PVC drawstring bag containing:
• 500ml 3 in 1 Toilet Cleaner
• 500ml Interior Cleaner
• 300ml Porthole and Glass Cleaner
• Sponge
Part No. 5-81326
Supplied in a PVC drawstring bag containing:
• 1 litre Hull and Deck Shampoo
• 500ml Exterior Multipurpose Cleaner
• 300ml 3 in 1 Silicon Free Polish
• Sponge
Part No. 5-81327
CATALOGUE SUPPLEMENT - I
47
Polymarine Inflatable
Boat & Rib Care
BOAT CONSUMABLES
HYPALON FABRIC
PVC FABRIC
Hypalon inflatable boat material for repairing damaged tubes & floors.
Hypalon is a synthetic rubber material patented by DuPont. Hypalon has
many applications in many industries and it has proven itself as a
material with excellent air holding capabilities and oil resistance. Hypalon
coated onto polyester or nylon fabric with an interior coating of neoprene
is a very reliable and durable inflatable boat fabric and can last for more
than a decade even in the harshest environments.
PVC inflatable boat material for repairing damaged tubes & floors.
PVC is a vinyl polymer chemically known as polyvinyl chloride. In the
inflatable boat industry it is used as a coating on polyester or nylon to
increase the strength and tear resistance. Because it is a type of plastic,
it can be thermobonded or glued. This allows the manufacturer to mass
produce boats on a large scale with machines and unskilled labour.
Half roll (70cm x 15cm)
Half roll (70cm x 15cm)
Colour
Black
Blue
Grey
Light Grey
Orange
Red
White
Yellow
Full roll (145cm x 15cm)
Colour
Black
Blue
Grey
Light Grey
Orange
Red
White
Yellow
Part No.
5-81050
5-81051
5-81052
5-81053
5-81054
5-81055
5-81056
5-81057
Colour
Black
Blue
Grey
Orange
Red
White
Part No.
5-81060
5-81061
5-81062
5-81064
5-81065
5-81066
Full roll (145cm x 15cm)
Colour
Black
Blue
Grey
Orange
Red
White
Part No.
5-81070
5-81071
5-81072
5-81074
5-81075
5-81076
For advice on selecting the correct fabric go to: www.polymarine.com
2990 HYPALON ADHESIVE Inflatable Boat Adhesive.
3026 PVC ADHESIVE Inflatable Boat Adhesive.
Solvent based polychloroprene rubber glue giving high strength bonds,
particularly suitable for emergency repair of inflatable boats, RIBs and
Dinghies. Will bond natural rubber, polychloroprene, butyl, nitrile ,
hypalon and polyurethane rubber materials, leather.
Solvent based polyurethane adhesive giving excellent adhesion to both
plasticised and unplasticised PVC nylon fabric, polyurethane fabric and
foam. Use for repair of all PVC inflatables including Zodiac/Bombard
"Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex".
PLEASE NOTE :- For a complete bond 2903 solvent (Part No. 5-81125 or
5-81126), must be used before the adhesive is applied.
Hypalon 1 Part Adhesive
• Excellent resistance to heat, salt
water and humidity
• Easy to use as a single part glue
for quick and temporary repairs
• Cleaner - P510 Hypalon Solvent
(Part No. 5-81120 or 5-81121)
70ml - Part No. 5-81101
5-81101
5-81103
5-81104
48
Part No.
5-81040
5-81041
5-81042
5-81043
5-81044
5-81045
5-81046
5-81047
PVC 1 Part Adhesive
• Easy to use as a single part glue
for quick and temporary repairs
• Contact bonds in 10-15 minutes,
full cure 48 hours
70ml - Part No. 5-81111
PVC 2 Part Adhesive
• Easy to mix two part system
supplied in sets with requisite
amount of curing agent; can be
used as a single part for quick
temporary repairs
• Contact bonds in 10-15 minutes,
full cure 48 hours
• Coverage - using 2 coats, 1 litre
bonds 1 square metre
• Easy to apply by brush, roller or
serrated trowel
Hypalon 2 Part Adhesive
As above, plus:
• Easy to mix two part system
supplied in sets with requisite
amount of curing agent; can be
used as a single part for quick
temporary repairs
• Contact bonds in 10-15 minutes,
full cure 48 hours
• Coverage - using 2 coats, 1 litre
bonds 1 square metre
• Easy to apply by brush or roller
250ml Tin & Curing Agent
Part No. 5-81103
250ml Tin & Curing Agent
Part No. 5-81113
1 Litre Tin & Curing Agent
Part No. 5-81104
1 Litre Tin & Curing Agent
Part No. 5-81114
CATALOGUE SUPPLEMENT - I
!
DO NOT USE HYPALON PRODUCTS ON ANY
PVC COATED FABRIC SURFACE.
Polymarine Inflatable
Boat & Rib Care
BOAT CONSUMABLES
HYPALON EMERGENCY BOAT REPAIR KIT
PVC EMERGENCY BOAT REPAIR KIT
Contains: 70ml tube of Hypalon adhesive,
35 x 15cm of Hypalon material, abrasive
paper and instructions.
Please Note:- For a permanent repair,
Polymarine 2 part adhesive must be used.
Colour
Black
Blue
Grey
Light Grey
Orange
Red
White
Yellow
Part No.
5-81000
5-81001
5-81002
5-81003
5-81004
5-81005
5-81006
5-81007
Contains: 70ml tube of PVC
adhesive, 35 x 15cm of PVC
material and instructions.
Colour
Black
Grey
Orange
Red
White
Part No.
5-81020
5-81022
5-81024
5-81025
5-81026
Please Note:- For a permanent repair, Polymarine 2 part adhesive must be used.
P510 HYPALON SOLVENT PRIMER
2903 PVC SOLVENT PRIMER & CLEANER
• For degreasing hypalon surfaces
before adhering and cleaning
brushes.
• Suitable for reactivating applied
adhesive
500ml Part No. 5-81120
1 Litre Part No. 5-81121
• A primer to degrease and prepare
PVC surfaces before adhering
• Suitable for reactivating applied
adhesive and cleaning brushes
500ml Part No. 5-81125
1 Litre Part No. 5-81126
FLEXITHANE HYPALON PAINT
SUPERFLEX PVC PAINT
A fully flexible paint formulated for Hypalon PU and
rubber variant fabric
• Smooth satin finish, will not crack or flake off
• No mixing required, apply with a brush or gloss
roller, touch dry in 30 minutes. Can be sprayed
• Two coats for best results
• Used for resealing and preventing rubbing strake
and mouldings from powdering
Colour
• Coverage 3 sq m per 500ml
Black
WARNING - Flexithane must not
Blue
be used on any PVC coated
Grey
fabric surface.
Orange
Red
For paint colours see page 50
White
A fully flexible paint formulated for renovating PVC
and any other PVC variant fabric
• Smooth satin finish, will not crack or flake off
• No mixing required, apply with a brush or gloss
roller, touch dry in one hour
• Seawater and sunlight resistant
• Many uses including hatch covers, PVC fenders,
boatcovers, dodgers etc.
Colour
• Coverage 2.5 sq m per 500ml
Black
Blue
Grey
Orange
Red
White
Yellow
Midnight Blue
Size
500ml
500ml
500ml
500ml
500ml
500ml
Part No.
5-81210
5-81211
5-81212
5-81214
5-81215
5-81216
LIQUID LETTERS HYPALON LETTERING PAINT
A fully flexible paint formulated for Hypalon PU and
rubber variant fabric
• Smooth satin finish, will not crack or flake off
• No mixing required, apply with a brush or gloss
roller, touch dry in 30 minutes. Can be sprayed
• Two coats for best results
• Used for resealing and preventing rubbing strake
and mouldings from powdering
Colour
WARNING - Must not be used on
Black
any PVC coated fabric surface.
Blue
Grey
For paint colours see page 50
Orange
Red
White
!
Size
500ml
500ml
500ml
500ml
500ml
500ml
500ml
500ml
Part No.
5-81230
5-81231
5-81232
5-81234
5-81235
5-81236
5-81237
5-81238
For paint colours see page 50
LETTERFLEX PVC LETTERING PAINT
Size
125ml
125ml
125ml
125ml
125ml
125ml
Part No.
5-81200
5-81201
5-81202
5-81204
5-81205
5-81206
DO NOT USE HYPALON PRODUCTS ON ANY
PVC COATED FABRIC SURFACE.
Tin
A fully flexible paint formulated for
Colour
renovating PVC and any other PVC
Black
variant fabric
Blue
• Smooth satin finish, will not crack or
Orange
flake off
Red
• No mixing required, apply with brush White
or gloss roller, touch dry in 1 hour
Yellow
• Seawater and sunlight resistant
Aerosol
• Many uses including hatch covers,
Colour
PVC fenders, boatcovers,
Orange
dodgers etc.
Red
• Can be used with our cut stencils
White
Size
125ml
125ml
125ml
125ml
125ml
125ml
Part No.
5-81220
5-81221
5-81224
5-81225
5-81226
5-81227
Size
150ml
150ml
150ml
Part No.
5-81244
5-81245
5-81246
CATALOGUE SUPPLEMENT - I
49
Polymarine Inflatable
Boat & Rib Care
BOAT CONSUMABLES
SP54 HYPALON ANTIFOUL
SP54 PVC ANTIFOUL
Fully flexible antifoul for use on Hypalon
material. Can also be used on non-flexible
surfaces such as GRP.
• Hull and tubes can be protected on your RiB
with just one product.
• Developed using unique pseudo-organic
technology
• Extensively tested - keeps virtually Colour
Black
all hulls free from growth of algae,
Blue
crustaceans and othe unwelcome
Grey
marine life
Orange
• Includes copper
White
A fully flexible antifoul for use on PVC
material. Can also be used on non-flexible
surfaces such as GRP.
• Hull and tubes can be protected on your RiB
with just one product.
• Developed using unique pseudo-organic
technology
• Extensively tested - keeps virtually Colour
all hulls free from growth of algae,
Black
crustaceans and othe unwelcome
Grey
marine life
Red
• Includes copper
White
Polymarine Paint Colours
Black
Blue
Size
1 Litre
1 Litre
1 Litre
1 Litre
1 Litre
Part No.
5-81270
5-81271
5-81272
5-81274
5-81276
Part No.
5-81280
5-81282
5-81285
5-81286
The printing processes used in producing the colour charts do not allow exact colour
reproduction and we recommend that you should check for accuracy before applying.
Grey
Orange
Red
SURE SEAL EXTRA
AQUA STOP
Flexible Repair Sealant & Adhesive
Waterproof permanent repair to coated
fabrics, PVC, PU, neoprene, rubber, leather,
most plastics and fabrics Vinyl, Fibreglass,
Glass, Wood, Metal, etc
NEW
35ml Part No. 5-81307
Protect your electrical
equipment from
water/moisture ingress
• Formulated to protect all low
voltage equipment
eg. VHF radios,
GPS, etc.
• One application
provides
permanent
protection
DISPEL STAIN & RUST REMOVER
Removes rust stains, organic stains, algae
stains from fibre glass.
• Easy to use, non abrasive gel
• For those difficult to remove yellow and rust
stains on GRP
500ml Part No. 5-81300
INFLATABLE BOAT
CLEANER
An easy to use cleaner specifically
formulated for use on inflatable boats
• Suitable for both PVC and
Hypalon fabrics
• Removes dirt, white oxidation,
grease, oil and petrol deposits
• Biodegradable
500ml Part No. 5-81310
200ml Aerosol
Part No. 5-81302
White
CATALOGUE SUPPLEMENT - I
Midnight Blue
Flexible waterbased acrylic latex sealant used internally
for sealing porosity and minor leaks in Hypalon & PVC
inflatables
• Sealflex is introduced into the
inflatable through the valve, which is
then inflated and tumbled to circulate
the sealant which adheres & cures to
form an impermeable membrane
• Suitable for painting on the inside of
seams during manufacture
• Sufficient for an 8-9ft inflatable
• Improved formula flows & seals the
tube more efficiently
500ml Part No. 5-81305
A finishing product specifically for use on
inflatable boats
• Suitable for both PVC & Hypalon fabrics
• Easy to apply with a soft cloth, no
polishing required, dries to a
pleasant sheen
• Helps to prevent resoiling
• Contains no silicones or distillates
250ml Part No. 5-81314
Supplied in a draw string PVC bag with blue
fabric top, comes complete with two Inflatable
Boat Cleaners, one Inflatable Boat Finish, one
GRP Silicon Free Polish, two Polishing Cloths,
one Sponge, one Trigger Spray and a pair of
disposable gloves.
Everything that you need to keep your Rib
looking good.
Part No. 5-81320
Yellow
SEALFLEX SEALANT
INFLATABLE BOAT FINISH
RIB VALETING KIT
50
Size
1 Litre
1 Litre
1 Litre
1 Litre
INFLATABLE BOAT GRP
SILICON FREE POLISH
• Wipe on – Polish – Wipe off
• Gently buffs and polishes to a
brilliant shine without scratching
• Totally safe on all marine
materials
• Silicon Free formulation
250ml Part No. 5-81316
FLUSH FIT VALVES
• Acetal flush fitting complete inflate/deflate valve
• Mechanically fitted into hole 38mm dia. with
reinforcing fabric doubler required depending
No Handle
Pull Handle
on pressure.
• Servicing is kept to a minimum.
Colour Pull Handle Part No.
• Overall Dia: 65mm
Black
No
5-81150
• Height: 43mm
Grey
No
5-81151
• Baynet fit cap.
Black
Yes
5-81152
• Push and turn core to deflate
Grey
Yes
5-81153
Weaver Snap Davits
GENERAL BOAT EQUIPMENT
WEAVER SNAP DAVITS FROM POLYMARINE
A set of ingenious lock-on davit fittings to secure an inflatable boat or
RIB tender to the swim platform or transom of the main vessel. For
tenders up to 60kg (140lbs) in weight.
Two davit fittings are bolted onto the swim platform or transom of the
main vessel, the rubber pads and hooks are attached to the tender,
and these then clip into a locked position on each davit head,
allowing the tender to be secured and tilted into a vertical position.
• Safely board/alight your tender
• Strong & Robust dinghy Pads
• Reduced mooring fees in marinas
• Easy snap-on action to lock
• Little force required to release
RBD100 SNAP DAVIT - SWIMBOARD FIT
RBD150 SNAP DAVIT - TRANSOM MOUNT
Suitable for tenders up to 60kg (140lbs) in weight.
Complete boxed kit contains:
• 2x S/S Snap Davit fittings
screws/nuts/washers
required for fixing
• 2x large grey rubber pads
• 2x stainless steel hooks
Part No. 6-38101
Suitable for tenders up to 60kg (140lbs) in weight.
Complete boxed kit contains:
• 2x S/S Snap Davit fittings
screws/nuts/washers
required for fixing
• 2x large grey rubber pads
• 2x stainless steel hooks
Part No. 6-38110
RBD100 KIT WITH 2", 4" EXTENDED OR OFFSET
DAVIT HEADS
QUICK RELEASE SHOE FOR RBD 100 SNAP DAVIT
2" or 4" extended head,
or 4" out 4" down offset davit
head for curved swim platform.
Boxed kit for boats with a swim
platform comprises:
• 2x RP101 Pads (for attachment
to the inflatable or RIB tender)
• 2x RSH 120 Hooks
• 2x extended or offset head swim
platform mount Snap Davits
Description
2'' RBD100 Extended
4'' RBD100 Extended
4'' x 4'' RBD100 Offset
Part No.
6-38112
6-38114
6-38119
Pair of Stainless Steel shoes for RBD 100
kits for quick removal of davit heads.
Supplied with stainless steel fixing bolts and
quick release pin. The 'quick fit' allows for
quick removal of the davit heads so bathers
don't stub their toes or trip over the davit
heads.
Allows unhindered access to the bathing
platform. The shoes are bolted down to your
swim platform. By releasing the pin the davit Part No. 6-38150
head can be quickly and easily removed.
Stand-off Arms & Securing Pads
Stainless steel bracket arms secure the tender in a raised position on davits. Fixed by a bracket to the yacht transom at its highest point when the
tender is raised to 90 deg, and to a special moulded pad adhered to the upper part of the tender when raised. Provides security when underway
and removes strain on the davit fittings in keeping the tender at 90 deg. Arms Supplied in Pairs / Pad in Singles
STAND OFF ARMS
Supplied in pairs as a kit with 2x arms and 4x 'L' shaped brackets for
mounting. Fixed onto the tender with one arm secured with an 'L' shaped
bracket to the edge of the transom at its highest
Size
Part No.
point when the tender is raised to 90º on its davits,
12'' x Pair 6-38161
and the second arm to a special moulded pad
18'' x Pair 6-38162
which is adhered to the upper part of the tender
24'' x Pair 6-38163
when raised, (order pads separately).
30'' x Pair 6-38164
For a rigid tender two 'L' shape bracket fixings
36'' x Pair 6-38165
can be used.
RP101 LARGE RUBBER
PAD FOR RBD100/150
RSH120 HOOKS FOR
RP101 PAD
Replacement neoprene pad for
RBD kits
• RSH 120 hook fits into the pad
• To be bonded onto tube
• Colour: Grey
Part No. 6-38155
Replacement stainless steel hooks
for neoprene pad for RBD kits
• Supplied as a pair
• Supplied with S/S fixing bolts
• To fit into RP101 pad
Part No. 6-38156
RUBBER PAD FOR STAND-OFF ARMS
TOGGLES FASTENERS FOR DAVIT HEADS
Designed for attaching stand-off brackets to the tube/inflatable.
Two can be used on a soft
tail dinghy. Pad is bonded on
using adhesive. Colour: Grey.
Part No. 6-38168
The Toggler is placed through a pre-drilled hole and the
stainless steel plate expands out. Insert the bolt and
your davit head is attached. No more stripping inside to
get to the nuts. Part No. 6-38152
CATALOGUE SUPPLEMENT - I
51
International Boat
Care Products
BOAT CONSUMABLES
UV WAX SEALER
NEW Boat Care products from
SUPER CLEANER
• High Strength Formula
• Removes dirt, oil, wax and grease
• Low odour
• Cleans and degrease without
damaging gelcoat or paint
• Does not leave any residue
• Biodegradable
• Leaves GRP and painted surfaces
ready to be restored
Part No. 5-60950 (500ml)
BOAT SHAMPOO
• Mild universal cleaner useful for
cleaning throughout the boating
season but won’t damage wax
protection
• Hydrophobic – repels water
• Free from silicon oils
• Mixable with sea water & fresh water
• Biodegradable
Part No. 5-60951 (500ml)
STAIN REMOVER
• High-strength GRP cleaning gel
• Easy to use
• Penetrating gel quickly dissolves
stains and marks on GRP areas like
waterline or exhaust pipe stains
• Removes surface rust on metal
and gelcoat
• Contains surfactant that dissolves oil
and proteins
• Does not damage adjacent surfaces
• Will not run on vertical surfaces
• No abrasives
• No scrubbing required
Part No. 5-60952 (500ml)
LIQUID RUBBING
• Coarse grain size – suitable for
painted surfaces and GRP in
poor condition
• Safely removes marks and
yellowing, and restores gloss
• Restore the gelcoat’s original lustre
• May be used in direct sunshine
• Does no contain wax & silicone oils
• Manual or machine use
(800-1000 rpm)
Part No. 5-60953 (500ml)
MARINE POLISH
• Fine graded liquid polish for a high
gloss, smooth, reflective surface
• Contains no silicon oils
• Mild odour
• Manual or machine use
(800-1000 rpm)
Part No. 5-60954 (500ml)
MARINE WAX
• Protective wax for GRP and
paintwork
• Provides excellent protection for
polished surfaces
• No abrasives or silicon oils
• Easy to work & apply on large areas
• Manual or machine use
(800-1000 rpm)
Part No. 5-60955 (500ml)
POLISH AND WAX
• All in one medium grade polish and
wax formula
• A quick and easy solution which
saves time and effort
• Contains a protective wax for
long-lasting gloss
• Safe for use on gelcoat and
painted surfaces
• Manual or machine use
(800-1000 rpm)
Part No. 5-60956 (500ml)
• UV absorbing reactive wax, sealing
the surface for ultimate gloss
protection
• Protects polished surfaces against
the elements, dirt and oil
• Hydrophobic – repels water. Also
repels oil and dirt
• Easy to use
• Excellent UV protection
• Manual or machine use
(800-1000 rpm)
Part No. 5-60957 (500ml)
TEAK RESTORER
• Cleans, restores and brightens teak
and other hardwoods back to their
original colour
• Does not damage GRP, varnish,
paintwork or aluminium
• Can be used in conjunction with
seawater or freshwater
• For use on any teak or hardwood
Part No. 5-60958 (500ml)
TEAK OIL
• Penetrating hardwood oil which
protects and enhances the natural
beauty of teak
• Contains a rust inhibitor for
metal surfaces
• Penetrates even moist wood
• Produces a protective and
easy-clean surface
• For use on any teak or hardwood
Part No. 5-60959 (500ml)
INTERNATIONAL MARINEFILM
Instant Scratch Repair for Gelcoat & Paint
Minor scratches are practically unavoidable. Yet we all know how much even the
smallest scratch can be annoying. That's why MarineFilm puts a unique smart and
easy do-it-yourself solution into the hands of all
boat owners. Coated with high quality paint, it
covers minor scratches with an ultra-thin
adhesive film, instantly covering unsightly
scratches in gelcoat or paint above the waterline.
MarineFilm is easy to apply and offered in the
twelve most popular gelcoat and International
Paint topside paint colours. It’s cost-effective, kind
to the environment and it provides strong season
long adhesion whilst being easily removable
when the boat is next hauled where it can be
permanently repaired.
52
CATALOGUE SUPPLEMENT - I
• Easy to apply, meaning a pleasing finish can be achieved quickly and
unsightly scratches can be hidden instantly and without fuss
• Avoids the need for clean up and personal
Part No. Description
protective equipment during application
5-60970 White 011
• Easy to match popular marine gelcoats
5-60971 White 012
and paints
5-60972 White 013
• Provides a season long temporary repair
5-60973 White 014
that enables the aesthetics of the topside to
5-60974 White 015
be maintained until the boat is next hauled
5-60975 Black 111
• No hassle removing when time to
5-60976 Blue 211
permanently repair.
5-60977 Blue 212
• Ready to use right out of the package
5-60978 Blue 213
• Two pre-cut shapes
5-60979 Blue 214
• Custom fit to size of repair
5-60980 Green 311
5-60981
Red 411
International Paints &
Cuprinol Bilgex
BOAT CONSUMABLES
FOR PR0FESSIONAL USE ONLY
MICRON WA PREMIUM ANTIFOULING
Contains unique water activated matrix technology,
combining powerful performance with very low VOC1
Unique to International Paint, Micron WA has been developed using novel paint technology - Water
Activated Matrix - which provides outstanding protection against all types of fouling in all types of water,
including high-challenge areas, for up to 24 months.*
• Longer in-service periods improve flexibility of maintenance schedules
• Once activated, Water Activated Matrix technology delivers a crisp, vibrant colour and uniform
appearance to provide a striking, attractive finish.
• It also helps to reduce environmental impact by having optimised copper levels, using fewer natural
resources and minimising the amount of VOCs emitted to the
Practical Coverage (m²/Lt): 3.66 (Airless Spray),
atmosphere that form ground level ozone (smog) which is
8.3 (Brush/Roller)
harmful to humans, animals, vegetation and marine life.
No. of coats: 2 - 3
• The extremely low VOC (~5 g/l) also helps with local VOC
Substrates: GRP, Lead, Steel, Wood, Cast Iron
regulation compliance.
Application: Brush, Roller, Airless Spray
• For all suitably primed substrates except aluminium
Rated “Outstanding” on high fouling areas.
• One pack product in a 5 Litre tin
Colour Pre-Immersion
Colour Post-Immersion
* Depends on the total DFT (dry film thickness) applied.
For 24 months performance, a total dry film thickness of
120µm (microns) needs to be achieved. Extra coats are
needed if vessels are expected to operate at speeds in
excess of 15 knots for extended periods.
Black
Blue
Navy
Water Activated Matrix Technology
The unique Water Activated Matrix consists of a densely packed, structured arrangement of
biocides, colouring pigment and voids. The antifouling appears matt when first applied, with colour
variations or unevenness caused by different rates of water evaporation. However, on immersion,
water enters the voids and filters through the matrix, saturating the pigments and developing the
bright, crisp colour of the paint whilst, at the same time, efficiently releasing the active ingredients
to deliver powerful antifouling performance.
Patent Pending
Colour
Black
Blue
Navy
Red
Dover White
Red
Part No.
5-60094
5-60095
5-60096
5-60097
5-60098
Dover White
The printing processes used in
producing the colour charts do not allow
exact colour reproduction and we
recommend that you should check for
accuracy before applying. International
Paints colour charts are available.
Micron WA - Outstanding Multi Season Protection*
• Haul, wash and re-launch without re-painting
every season
• Extended in-service periods so owners and
captains save money by the boat remaining in
the water for longer
• Improved flexibility of maintenance schedules
with the option to apply more coats for more
than 24 months performance
A panel test conducted in Malaga, Spain
examined five different antifouling paints.
Sample 3 with Micron WA shows very little slime
after immersion for 26 months, in comparison to
many of the others which display a significantly
higher level of slime and fouling.
CUPRINOL BILGEX
Clears Grease, Scum & Oil
• Emulsifies petrol, oil and grease in the bilge
• Removes grease, scum and floating oil with
the normal movement of the boat
• Biodegradable
• Highly concentrated - a little goes a long way
• Gets rid of bad smells
• Non-caustic; harmless to paintwork and
fittings when diluted
INTERNATIONAL
INTERTUF 203
A one pack, tar free vinyl
anticorrosive which can
be used at temperatures
down to -5°C (23°F).
20 Litre tin.
Part No. 5-60893
1 Litre Bottle Part No. 5-27030
5 Litre Bottle Part No. 5-27031
DELIVERY
Please contact your nearest Aquafax depot
for carriage details.
CATALOGUE SUPPLEMENT - I
53
Loctite Sealants
& Adhesives
BOAT CONSUMABLES - SEALANTS & ADHESIVES
LOCTITE 243 LOCK ‘N SEAL 24ml
LOCTITE 270 STUD ‘N BEARING FIT 24ml
Loctite 243 medium strength threadlocker, suitable for all metal threaded
assemblies. Breakaway torque 26Nm.
• Works on all metals, including passive substrates (e.g. stainless steel,
aluminium, plated surfaces)
• Proven to tolerate slight contaminations of industrial oils, e.g. engine
oils, corrosion prevention oils and cutting fluids
• Prevents loosening on vibrating parts, e.g. pumps, gear boxes or presses
• Permits disassembly with hand tools for servicing
• P1 NSF Reg. No.: 123000
Loctite 270 High Strength, general purpose threadlocker.
Breakaway torque 33Nm.
• Suitable for all metal fasteners, including stainless steel, aluminium,
plated surfaces and chrome-free coatings
• Tolerates slight contaminations of industrial oils, e.g. engine oils,
corrosion prevention oils, cutting fluids
• Ideal for permanently locking studs on engine blocks and pump housings
• To be used if regular removal for maintenance is not required
• P1 NSF Reg. No.: 123006
Part No. 5-21141 (Qty 12)
Part No. 5-21141/1 (Single)
Part No. 5-21142 (Qty 12)
Part No. 5-21142/1 (Single)
Specification
Maximum thread size:
Strength:
Breakaway torque:
Fixture time steel:
Fixture time brass:
Fixture time stainless steel:
Service temperature range:
M36
Medium
M10 bolts: 26 Nm
10 min.
5 min.
10 min.
-55 °C to +180 °C
Specification
Maximum thread size:
Strength:
Breakaway torque:
Fixture time steel:
Fixture time brass:
Fixture time stainless steel:
Service temperature range:
Up to M20
High
M10 bolts: 33 Nm
10 min.
10 min.
150 min.
-55 °C to +180 °C
LOCTITE 55 PIPE SEALING CORD 50m Pot
LOCTITE 2701 THREADLOCKER 50ml
Loctite 2701 High strength threadlocker, especially for
chromated surfaces
Part No. 5-21144 (Single)
Specification
Maximum thread size:
Strength:
Breakaway torque:
Fixture time steel:
Fixture time brass:
Fixture time stainless steel:
Service temperature range:
Up to M20
High
M10 bolts: 38 Nm
10 min.
4 min.
25 min.
-55 °C to +150 °C
Specification
Maximum pipe size:
Disassembly strength:
Service temperature range:
Breakaway torque:
4"
Low
-55°C - +149°C
n.a.
LOCTITE SI 5980 QUICK GASKET
LOCTITE SI 5990 QUICK GASKET
40ml General Purpose Flange Sealant
40ml High Temperature Flange Sealant
Premium high performance silicone black for flanges exposed to
permanent oil contact.
• Excellent oil resistance
• For all kind of flanges including metals and
plastics as well as combinations of both
• Can replace pre-cut paper or cork gaskets
• High flexible gasket maker
• Non-corrosive
• Health & Safety friendly
Premium high performance silicone copper for flanges exposed to high
temperatures (up to 300ºC).
• Excellent temperature resistance
• For all kind of flanges including metals and
plastics as well as combinations of both
• Can replace pre-cut paper or cork gaskets
• Non corrosive
• Health & Safety friendly
Part No. 5-21162 (Qty 12)
Part No. 5-21162/1 (Single)
Part No. 5-21160 (Qty 12)
Part No. 5-21160/1 (Single)
Specification
Colour:
Tack free time:
Tensile strength:
Service temperature range:
54
Loctite 55 pipe & threadsealing cord.
• General purpose, threaded pipe and fitting sealant
• Non curing, immediate, full pressure seal
• For a quick, easy and reliable seal
• WRC listed, meets BS 6920 for potable water: 0808533
• DVGW/KTW approval for gas and potable water
• Tested in accordance with EN 751-2 Class ARp and DIN 30660
• Certified to NSF/ANSI, Standard 61
Part No. 5-21155 (Qty 24)
Part No. 5-21155/1 (Single)
Black
30 min.
1.6 N/mm²
-55°C to 250°C
CATALOGUE SUPPLEMENT - I
Specification
Colour:
Tack free time:
Tensile strength:
Service temperature range:
Copper
40 min.
1.9 N/mm²
-60°C to 350°C
Sealants & Adhesives
(Various)
BOAT CONSUMABLES - SEALANTS & ADHESIVES
LOCTITE SI 5926 INSTANT GASKET
LOCTITE 574 MULTI GASKET
40ml Multi purpose flexible silicone sealant.
50ml general purpose sealant for
machined, rigid metal flanges.
For flexible flanges, machined or casted surfaces. Can be used on metal,
plastic and painted parts. Resists vibration, thermal expansion and
contraction
Part No. 5-21168 (Single)
Part No. 5-21166 (Qty 12)
Part No. 5-21166/1 (Single)
Specification
Colour:
Service temperature range:
Max. gap:
Skin over time:
Cure through volume in 24 h:
Strength:
Cure method:
Ideal for use on rigid metal parts, e.g. cast iron
components and pump housings
Specification
Colour:
Service temperature range:
Tensile shear strength:
Max. gap:
Fixture time steel:
Fixture time aluminium:
Strength:
Cure method:
Blue
-60°C - +200°C
1mm
60 min.
2.5 mm
Low
Moisture (Silicone)
Orange
-50°C - +150°C
8.5N/mm²
0.25mm
15 min.
45 min.
Medium
Anaerobic
LOCTITE 3463 MAGIC METAL STEEL STICK 114g
Metal-filled Compounds, 2K Epoxy.
Sets in 10 minutes. Steel filled kneadable
stick. Adheres to damp surfaces and cures
under water. Chemical and corrosion
resistant. Can be drilled, filed and painted.
• Emergency sealing of leaks in
pipes and tanks
• Smoothes welds
• Repairs small cracks in castings
Specification
Working life:
Fixture time:
Shear strength (GBMS):
Compressive strength:
Service temperature range:
Part No. 5-21170 (Single)
GEOCEL® TRADE MATE
SILICONE PLUMBA FLUE
High Temperature
Silicone Sealant
CAPTAIN TOLLEY'S
CREEPING CRACK CURE
• One part water based acrylic co-polymer
penetrating sealant
• Seals hairline cracks by capillary action 24 hour
curing time providing a clear, flexible and
paintable seal
• Can be used on wood, glass, rubber, metals,
perspex, ceramic, fibreglass, polystyrene and
some plastics
• For use around the home, boat caravan,
motorhome or car
Size
60ml
60ml
250ml
250ml
Qty
12
Each
12
Each
Part No.
5-70100
5-70100/1
5-70101
5-70101/1
A one component, high
temperature acetoxy silicone
sealant suitable for use on nonporous surfaces and ideal for
sealing gas flues.
Once cured, Trade Mate Plumba
Flue is able to withstand
temperatures of up to 300ºC for
short term exposure and 250ºC
for long term exposure.
Suitable for sealing gas flue and
chimney terminals.
3 min.
10 min.
>6 N/mm²
82.7 N/mm²
-30 °C to +120 °C
See Section 5 for
Paints, Sealants
& Consumables
Bulk Pack: 12 x 310ml cartridges
(Black): Part No. 5-70031
Single: 310ml cartridge (Black):
Part No. 5-70031/1
FARÉCLA SPURRING BRUSH
Spurring brush for manually cleaning excess
compound from a pad.
Part No. 5-21460
CATALOGUE SUPPLEMENT - I
55
Quicksilver Oils
& Lubricants
BOAT CONSUMABLES - OILS & LUBRICANTS
PREMIUM PLUS 2 STOKE TC-W3 OUTBOARD OIL
PREMIUM 2 STOKE TC-W3 OUTBOARD OIL
Specifically formulated with a marine additive package to meet the
needs of low to mid-horsepower outboard engines.
• For use in normal marine operating conditions
• Exceeds TC-W3 standards
• Reduces rust and corrosion of internal components
• Provides enhanced detergency to help keep
your engine free of deposits
• Meets all outboard and personal watercraft
manufacturers’ recommendations for use of
TC-WII and TC-W3 oils in pre-mix or
oil-injected models
Size
1 Litre
4 Litre
10 Litre
Qty
6
3
2
Part No.
5-38021
5-38022
5-38023
OPTIMAX/DFI 2 STOKE OUTBOARD OIL
Specifically formulated and developed to meet the needs of all
Direct Fuel Injected (DFI) 2-stroke outboard engines.
• Specifically formulated to meet the unique performance demands of
next generation two-stroke DFI engines
• Incorporating a synthetic, high viscosity, lubricity
additive to provide maximum scuff protection at
the high operating temperatures associated
with DFI engines
• Enhanced detergency additives
providing superior piston cleanliness to
prevent ring sticking.
• Formulated with improved rust
protection for the unique demands of
the marine environment.
Size
4 Litre
10 Litre
Part No.
5-38037
5-38038
Size
1 Litre
4 Litre
10 Litre
Qty
6
3
2
Part No.
5-38026
5-38027
5-38028
HEAVY DUTY DIESEL ENGINE OIL 15W 40
Specifically formulated and developed to meet the needs of all
marine diesel engines.
• 15W-40 oil formulated to combat sludge and
varnish formation
• Contains a higher additive level
than standard fleet oils, providing
better protection
• Provides excellent shear stability to
assure stay-in-grade performance,
even in highly stressed applications
• Protects internal engine components
from corrosion and wear
• Provides excellent water tolerance.
Size
4 Litre
Qty
3
Part No.
5-38042
PERFORMANCE 4 STOKE OUTBOARD OIL 10W 30
STERNDRIVE & INBOARD 4 STOKE OIL 25W 40
Specifically formulated and developed to meet the needs of all
4-stroke outboard engines.
• Developed for the rigours of the marine environment
• Field-proven to provide superior lubrication as well as
protection from corrosion and wear
• Low-temperature viscosity formula allows for easy
cold temperature starting
• Shear stable additives prevent oil degradation.
• Enhanced formula developed with heavy
duty additives
• Exceeds all 4-stroke outboard engine
manufacturers’requirements and surpasses API
service requirements for SJ, CF-2 and CH-4
Specifically formulated and developed to meet the needs of
high-output sterndrive and inboard engines.
• Multi-viscosity 25W-40 oil formulated to eliminate thermal
breakdown (no viscosity improvers necessary) under
extreme temperatures and loads
• Field-tested & proven in petrol & diesel applications
• Provides superior lubrication and protection of
internal components from corrosion, wear,
scuffing and scoring – even in higher
temperature engines
• Meets and exceeds API service requirements for
SJ, CF-2, CH-4 with a multi-functional additive
that assures “Marine Grade” oil performance.
Size
1 Litre
4 Litre
56
Qty
3
2
Specifically formulated with a higher concentration marine additive
package to meet the needs of high-horsepower outboards,
including direct fuel-injected engines.
• For use in extreme marine operating conditions
• Far exceeds Mercury in-house test standards which are
more stringent than the industry’s TC-W3® standard
• Cleanest burning-reduces carbon build-up in
exhaust system
• Reduces smoke
• Superior lubrication
• Meets all outboard and personal watercraft
manufacturers’recommendations for use of
TC-W3 oils in pre-mix or oil-injected models
Qty
6
3
Part No.
5-38045
5-38046
CATALOGUE SUPPLEMENT - I
Size
1 Litre
4 Litre
Qty
6
3
Part No.
5-38048
5-38049
Quicksilver products are available as single containers,
add /1 after the case part no. e.g 5-38021/1
Quicksilver Oils
& Lubricants
BOAT CONSUMABLES - OILS & LUBRICANTS
SYNTHETIC BLEND 4 STROKE OUTBOARD OIL 25W 40
Specifically formulated and developed to meet the needs
of all 4-stroke outboard engines.
• Newly formulated to provide the highest level of
performance and protection available today from a
4-stroke outboard oil
• Recommended oil for use in Verado engines.
• For use in all 4-stroke engines
• First in class for all durability test properties
• Industry-leading internal marine engine
corrosion protection
Size
1 Litre
4 Litre
Qty
6
3
Specifically formulated and developed to meet the
needs of all 4-stroke marine engines.
• Advanced protection not offered by
conventional automotive oils
• For use in all MerCruiser and other
sterndrive engines
• For use in all 4-stroke engines
• Superior friction and wear protection
• Industry-leading internal marine engine
corrosion protection
Part No.
5-38052
5-38053
Size
946ml
4 Litre
SYNTHETIC BLEND 4 STROKE OUTBOARD OIL 25W 50
Formulated for pressure charged and intercooled engines and
contains an advanced additive system that
provides unmatched performance.
• Industry leading corrosion protection
• Enhanced protection against varnish
build-up and sludge formation in critical
engine parts
• Improved lubricity benefits internal
engine parts for extended reliability
• Ideal for commercial and recreational use
• Exceeds all outboard manufacturers’
oil requirements and FC-W®
marine qualifications
Size
4 Litre
Qty
3
SYNTHETIC BLEND 4 STROKE STERNDRIVE AND
INBOARD OIL 25W 40
Part No.
5-38084
Qty
6
3
Part No.
5-38055
5-38056
SYNTHETIC 4 STROKE CATALYST
STERNDRIVE & INBOARD OIL 20W 40
Formulated to provide optimum operation and
longer life for the critical engine catalyst
systems that safeguard our environment.
Catalysed marine engine use
• Extended catalytic converter life due to low
phosphorus formation
Sterndrive and Inboard use
• Three distinct synthetic base stocks provide
superior wear protection and lubrication
• Provides extreme salt water and freshwater
rust protection
• Reduced oil consumption, improved pumping ability
• A more stable, high viscosity oil that prevents dirt
and soot from settling on metal surfaces
Size
• Exceeds all outboard manufacturers’ oil
requirements & FC-W® marine qualifications 1 Litre
PREMIUM GEAR OIL 80W 90
HIGH PERFORMANCE GEAR OIL SAE 90
Specifically designed and developed to meet the
needs of outboard lower units.
• Provides excellent lubrication and wear resistance
for outboard lower unit gears
• Great for both high and low horsepower
engines under varying operating conditions
• Special additives protect gears
from metal-to-metal contact
• Exclusive formulation helps
improve film adhesion to gears.
• Since no industry wide standards
exist concerning marine gear oils,
it is essential to use products such
as this which has been specifically
designed and tested for marine
Size
applications
237ml
• Do not mix with High
1 Litre
Performance Gear Oil
10 Litre
Engineered to provide maximum protection for
sterndrive and outboard lower units.
• Exclusive formula provides extended gear life in
extreme conditions including high-speed and high
horsepower applications
• Extensively tested to provide excellent
protection against corrosion and
excessive wear.
• Specifically formulated to help
prevent failures due to water
entering the gear housing.
• Extreme-pressure synthetic
additives protect gears from metal
to metal contact.
• Since no industry-wide standards exist
concerning marine gear oils, it is
Size
essential to use products such as this
237ml
which has been specifically designed
1 Litre
and tested for marine applications.
10 Litre
• Do not mix with Premium Gear Oil.
Qty
12
6
2
DELIVERY
Please contact your nearest Aquafax depot
for carriage details.
Part No.
5-38100
5-38102
5-38104
Qty
6
Part No.
5-38087
Qty
12
6
2
Part No.
5-38110
5-38112
5-38114
CATALOGUE SUPPLEMENT - I
57
Quicksilver Oils
& Lubricants
BOAT CONSUMABLES - OILS & LUBRICANTS
QUICKARE FUEL TREATMENT OIL
Quickare is a complete fuel treatment that can
be used in all grades of gasoline, including
ethanol blends.
Use Quickare at every fill-up to:
• Maximize engine performance with all grades
of gasoline
• Help control corrosion, gum and varnish
build-up, and phase separation associated
with ethanol-blended fuel
• Help control moisture and corrosion problems
associated with non-ethanol fuel
• Clean up existing varnish and
gum deposits from fuel lines,
tanks, carburetors and injectors,
intake valves, and spark plugs
• Keep fuel fresh between fill-ups
- up to 12 months
Each 355ml bottle treats 227L
Size
355ml
Qty
12
Formulated to clean the injectors and restore
original spray pattern - which helps prevent
recurring problems, and
reduces intake and port
deposits.
Clean fuel injectors mean
cleaner running, more efficient
engines and lower emissions.
No mixing required - use right
from the can.
Qty
12
Part No.
5-38126
QUICKLEEN ENGINE & FUEL
SYSTEM CLEANER
QUICKSTOR FUEL STABILIZER
Quickleen is a deep cleaning treatment
that should be used periodically.
Aggressive cleaners work to quickly and
thoroughly remove carbon deposits from
carburetors and injectors, intake valves, spark
plugs, piston crowns and cylinder heads.
This product does not contain
fuel stabilizers.
Use with Quickare to prevent fuel
breakdown and oxidation.
Use Quickleen to:
• Prevent engine knocking and
piston seize-up
• Extend spark plug life
Add Quickstor to fuel before storing your
engine to ensure your fuel is ready to
go at the start of the next season.
Use Quickstor to:
• Prevent regular and ethanol-blended fuel
from breaking down and oxidizing
• Prevent fuel system corrosion
• Prevent gum and varnish from
forming in the fuel and settling in
fuel lines and tanks, carburetors
and injectors
• Keep injectors and carburetor
lubricated
• Stabilize fuel for up to a year
Each 355ml bottle treats 227L
Each 355ml bottle treats 227L
Size
355ml
Part No.
5-38120
FUEL INJECTOR CLEANER
OTC® INJECT-R-KLEEN
Size
473ml
The Quicksilver Fuel Care System is one complete system - specially formulated
by the people who made your engine, with decades of experience on all kinds of
engines - to help it run its best. It's as easy as 1, 2, 3 - regardless of whether you
use ethanol- or non-ethanol-blended fuels.
Qty
12
Size
355ml
Qty
12
Part No.
5-38122
POWER TUNE ENGINE CLEANER
STORAGE SEAL FOGGING OIL
For use in all 2- and 4- stroke carbureted
and fuel injected petrol engines.
Assists in restoring lost power
due to carbon, gum and varnish
deposits that accumulate in the
combustion chambers of petrol
engines, as a result of normal
engine use. Removing these
deposits helps improve fuel/air
flow and overall engine
performance.
Specially formulated compound
for all 2- and 4- stoke engines
that forms a protective barrier
against rust on internal
metal surfaces.
To be used at the end of the
season or whenever it will not
be used for more than a month.
Size
340g
Qty
12
Part No.
5-38135
Size
340g
3.78L
Qty
12
2
Part No.
5-38143
5-38145
HIGH PERFORMANCE EXTREME GREASE
CORROSION GUARD AEROSOL
• Calcium sulfonate-based NLGI grease
• Excellent rust and corrosion protection
• Formulated for high-temperature & high-load applications
• 100% compatible with lithium-based greases
Corrosion Guard is a rust inhibitor that forms a water
resistant barrier on non-painted and painted surfaces.
Protects outdrives, lower units and power trim motors
from rust. Remains clear and doesn’t peel.
Can also be used to prevent further paint damage in
areas where undercutting and blistering have occurred.
Do not spray on surfaces coated with antifouling or
biocide paint.
For use in the following applications: steering systems/
cable linkages, throttle and shift cables, drive shaft
splines, gimbal bearings, U-joints, suspension systems,
chassis, ball joints, and trailer wheel bearings.
Size
227g
58
Part No.
5-38124
Qty
12
Part No.
5-38141
Use Quicksilver grease
gun (P/No. 5-38171)
CATALOGUE SUPPLEMENT - I
Size
312g
Qty
6
Part No.
5-38147
Quicksilver products are available as single containers,
add /1 after the case part no. e.g 5-38021/1
Quicksilver Oils
& Lubricants
BOAT CONSUMABLES - OILS & LUBRICANTS
2-4-C MARINE LUBRICANT WITH PTFE
Quicksilver 2-4-C marine grease is a multi-purpose lubricant
that withstands extreme friction and won’t break down when
mixed with water.
Contains rust and oxidation inhibitors to prevent corrosion. Also
contains PTFE for added friction reduction and reduced wear.
Recommended uses: steering systems, cable linkages, throttle
and shift cable and linkages, remote controls, prop shafts,
swivel pins, drive shaft splines, tilt lock mechanisms, tilt tubes,
hinge pins and trailer wheel bearings.
Size
227g
3 x 85g
397g
Qty
12
10
4
Part No.
5-38150
5-38152
5-38154
Use with
Quicksilver tubes gun (5-38171)
Quicksilver cartridge gun (5-38170)
–
POWER TRIM &
STEERING FLUID
• For use in power trim and
steering systems
• Unique formula helps prevent
corrosion, oxidation and wear
• Suitable for high temperature
applications
Size
237ml
Qty
12
QUICKSILVER GREASE GUN
QUICKSILVER GREASE GUN
For 85g cartridge (5-38152).
Part No. 5-38170
For 227g cartridge (5-38150).
Part No. 5-38171
EXTENDED LIFE COOLANT ANTI-FREEZE
MARINE ENGINE COOLANT
• Ready to use premixed 50/50
formula (deionised water)
• Ethylene glycol-based product
• Will not cause gelling and provides
superior corrosion protection
• Protects all cooling system metals
including aluminium
• Silicate and Phosphate free
• Provides anti-freeze protection to
-36ºC (-34ºF)
Low silicate formula specially
recommended for four stroke diesel
and petrol engines with closed
cooling systems
• Coolant additives provide protection
against corrosion and scale formation
• Ready to use premix formula requires
no mixing or additives
• Low silicate formula prevents silicate
gelling which can restrict engine
cooling passages and cause
overheating
• Provides antifreeze protection
down to -36ºC (-33ºF)
Size
3.78ml
Qty
4
Part No.
5-38182
Part No.
5-38160
Size
5 Litre
Qty
2
Part No.
5-38185
For more Oils & Lubricants see
Section 5 of our Catalogue
DELIVERY
Please contact your nearest Aquafax depot
for carriage details.
CATALOGUE SUPPLEMENT - I
59
Ultraflex Rotary Steering
Systems & M90 Cable
ULTRAFLEX STEERING
NEW RANGE
ULTRAFLEX T91 AND T93ZT (ZERO TORQUE)
ROTARY STEERING SYSTEMS
A Complete Steering System Consists Of:
STEERING HELM:
4-T91 - single cable steering helm
4-T93ZT - zero torque single cable steering helm, benefits user
from no feedback effect through the steering.
MOUNTING BEZEL:
4-X34 - black, 90° mounting
4-X34W - white, 90° mounting
4-X35 - black, 20° mounting
STEERING CABLE:
M90 Mach (patented) - see below
Featuring Planetary
Gear Design
OPTIONAL STEERING WHEEL (see Section 4)
ENGINE CONNECTION KITS (see Section 4)
Features And Technical Specifications:
• Specifically designed for high performance and high efficiency
applications
• M90 mach cable (patented) performance and durability
increased by top quality materials and construction
• Fast connect, simple installation, patented end fitting
• Engine side stainless steel cable output end featuring patented
gasket
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° helm mounting installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 4,2
• Stroke: 228 mm (9'')
• Maximum allowable steering wheel diameter: 406 mm (16'')
• Minimum steering cable bend radius: 200 mm (7.9'')
• Minimal feedback
• T91 and T93ZT steering systems are not to be used on boats
equipped with engines that exceed the maximum horsepower
rating of the boat
• For boats faster than 50 mph our hydraulic steering systems
are recommended
• Exceeds EN 28848 & ABYC P17 safety standards
4-T93ZT
4-T91
M90 MACH LOW FRICTION STEERING CABLE
4-X34W
M90 Mach steering cable is suitable for use also with 4-T85, 4-T71FC, 4-T72FC, 4-T73NRFC, 4-T74NRFC,
4-T81FC, 4-T83NRFC Ultraflex steering helms.
Note: M66 steering cable cannot be fitted to 4-T91 and 4-T93ZT steering systems
Part No.
4-M90-10
4-M90-11
4-M90-12
4-M90-13
4-M90-14
4-M90-15
4-M90-16
4-M90-17
4-M90-18
4-M90-19
4-M90-20
60
CATALOGUE SUPPLEMENT - I
Length
10ft (3.05m)
11ft (3.36m)
12ft (3.66m)
13ft (3.97m)
14ft (4.27m)
15ft (4.58m)
16ft (4.88m)
17ft (5.19m)
18ft (5.49m)
19ft (5.80m)
20ft (6.10m)
90° Mounting Bezel Kits
4-X35
20° Mounting Bezel Kit
4-X34
Ultraflex GoTech™
Steering System
ULTRAFLEX STEERING
GOTECH™- PACKAGED OUTBOARD STEERING SYSTEM FOR SINGLE ENGINE UP TO 115 HP
• For outboard single engine up to 115 hp • Wheel turns 4,5
1
2
GOTECH™ package kit contains:
UP18 Intermediate helm pump
Steering wheel
UC81-OBF Front mount outboard cylinder
is not included.
OL 150 Hydraulic oil – 2 litres.
KIT OB-GT/M Hose kit dia. 1/4" 6m (19.7') length
Part No. 4-48120
APPLICATION GUIDE FOR UC81-OBF
3
Engine
KIT OB-GT/M - Hose Kit with Preassembled Fittings at One
End for Single Station Application.
Consists of a pair of high pressure flexible hose dia. 1⁄4 '' with fittings
featuring turning nuts preassembled at one end only and supplied with
two non assembled fittings. 6m (19.7') standard length that can be cut to
fit the desired application and loose hose fittings easily fitted to cut ends.
1
Mercury®
Mariner®
Evinrude®
2 UP18 HELM PUMP
• Built-in lock valve for positive rudder lock
• Integral relief valve for over-pressure protection
• 3⁄4 " tapered anodized aluminium shaft
• Corrosion proof
Model:
composite housing
Mounting:
• Easy accessible lock valve and Displacement/
shaft seal for replacement
Revolution:
• For use with UC81-OBF
No. of pistons:
cylinder only
Relief Valve Setting:
• Intermediate dashboard
Max Wheel Dia.:
position mount
Weight:
UP18
Intermediate
18 cc – 1.1 cu.in.
5
55 Bar - 800 PSI
508mm (20'')
3.6kg (8lbs)
Yamaha®
Honda
®
Suzuki®
Tohatsu®
Nissan®
3 UC81-OBF CYLINDER
• Balanced: the number of turns
lock-to-lock is equal port to
starboard and vice-versa.
• Depending on the applications
on the outboard engine, the
UC81-OBF can be installed port
or starboard
Model:
Volume:
Output force:
Inside diameter:
Stroke:
Bleed fittings:
3
⁄8 '' (9.5mm)
Fittings:
UC81-OBF
81 cc - 4.9 cu. in
222 kg - 489 lbs
27.4 mm - 1.08''
186 mm - 7.3''
DN5 Quick connect
For high pressure
flex hose
Selva®
Johnson®
Power
50 - 75 - 90 2 Stroke
115 EFI 2 Stroke
75 - 90 - 115 Optimax 2 Stroke
40 - 50 - 60 EFI 4 Stroke
75 - 80 - 90 EFI 4 Stroke
100 - 115 EFI 4 Stroke
E40 - E50 - E55 - E60 2 Stroke
E75 - E90 2 Stroke
E115 2 Stroke V4
60 - 70 2 Stroke
75C - 90 2 Stroke
115C 2 Stroke
F40G - F70 4 Stroke
F30 - F40 - F60 - F75 - F80 EFI 4 Stroke
F90 - F100 - F115 EFI 4 Stroke
F80 - F100 4 Stroke
F115
F40D - F50F - F60C EFI 4 Stroke
BF40 - 50 - 60 - 75 - 90 4 Stroke
BF115D
BF115A
BF90 V-TEC 4 Stroke
DF40 - 50 - 60 - 70 - 80 - 90 4 Stroke
DF100 - 115 4 Stroke*
DF100 - 115 4 Stroke New Model
40 - 50 - 60 - 70 - 90 2 Stroke
75 - 115 2 Stroke
40 - 50TLDI 4 Stroke
70 - 90 - 115 TLDI 4 Stroke
40XS - 50 Madeira 2 Stroke
40XS - 50 Bull shark 2 Stroke
40XS - 60 Grey shark 2 Stroke
40XS - 70 Mako shark 2 Stroke
40XS - 60 St Tropez 2 Stroke
80 Portofino / Tigershark 2 Stroke
25 Kingfish 4 Stroke
40 Aruana 4 Stroke
40XS - 40XSR 50 - 60 Derado EFI 4 Stroke
40XSR EFI Murena 4 Stroke
80XS - 100 - 100XSR EFI Marlin 4 Stroke
115 - 115XSR EFI Tarpon 4 Stroke
115 - EFI Narwhal 4 Stroke
BJ60 - 70 4 Stroke
BJ90 - 115 4 Stroke
J90 - 115 V4 2 Stroke
Year
1990 - 2008
1990 - 2007
2004 to date
2004 to date
2000 to date
2007 to date
2004 to date
2004 to date
1995 to date
1984 - 2008
1998 - 2008
1990 - 2008
2010 to date
1999 - 2007
1999 - 2007
2000 to date
2004 to date
1995 to date
1998 - 2009
2009 to date
2008 to date
1998 to date
1998 - 2008
2008 to date
2004 to date
2004 to date
2004 to date
2004 to date
1995 to date
2000 to date
2001 -2007
2001 -2007
1995 -2007
*NOTE: Suzuki® engines built from 1998 to 2008 installing
UC81-OBF cylinder require optional KIT SU Part No. 4-48130
Suitable for an outboard engine up to 115hp and
where the boat does not exceed 34.5mph (30 knots).
NOT INTENDED FOR USE IN RACING APPLICATIONS
CATALOGUE SUPPLEMENT - I
61
Fuel Accessories
ENGINE ROOM
FUEL-GUARD DECONTAMINATOR
Features
• Removes 95% of solid contaminants and 99.9%
visible and emulsified water
• Reusable filter element, no replacement filter cartridge
is required
• Simple maintenance with no tools needed
• Can be used with both petrol and diesel fuels
• Conforms to the Boat Safety Scheme
NEW
How It Works
The Fuel-Guard decontaminator is sited between the fuel tank
and the engine fuel filter. Fuel enters the specially designed
element which induces a swirling action separating off the water
and solid contaminants.
The formulated green coating on the element allows fuel to pass
through repelling all water and contaminants to the base of the
filter housing.
Contaminated fuel can be seen at the base of the filter housing
and can be easily and safely drained off.
The element is simple to remove and can be washed with clean
fuel should it become blocked.
Part No.
Max Engine
Size (BHP)
Fuel Connections
(BSPF)
Spare
Elements
2-76980
2-76981
2-76982
150
600
1200
3/8''
1/2''
1/2''
12-76980-1
12-76981-1
12-76982-1
How It
Works...
Fuel Fittings
Part No.
1-14070
1-14110
1-14130
1-14140
1-14170
Male Stud Coupling
1
⁄4 " x 3⁄8 " BSPT
5
⁄16 " x 3⁄8 " BSPT
3
⁄8 " x 3⁄8 " BSPT
3
⁄8 " x 1⁄2 " BSPT
1
⁄2 " x 1⁄2 " BSPT
Part No.
1-25240
1-25270
1-25290
1-25300
1-25330
1-25360
Male Stud Coupling
6mm x 3⁄8 " BSPT
8mm x 3⁄8 " BSPT
10mm x 3⁄8 " BSPT
10mm x 1⁄2 " BSPT
12mm x 1⁄2 " BSPT
15mm x 1⁄2 " BSPT
CAN-SB PLASTIC
FUEL JERRY CANS
2-20115
2-20117
2-20116
New Range of
Shakespeare
Fuel Additives
Now Available
- see page 46
Part No. Ltrs
2-20115
5
2-20116 10
2-20117 20
CATALOGUE SUPPLEMENT - I
W(mm)
265
265
370
L(mm)
145
145
380
ANTI-SYPHON LOCK WITH VALVE
Universal anti-syphon lock
valve to prevent fluids
syphoning from a tank
or sea water
intake/outlet.
Diameters: 13 to 38mm A
Height (A): 158mm (61⁄4'')
Width (B): 305mm (12'')
Part No. 2-20295
62
H (mm)
260
375
220
B
B
A
Weight
1.75kg
2.5kg
3.2kg
Valves & Skin Fittings
PLUMBING - VALVES
NEW RANGES
GUIDI ‘ALEX’ NON-STICK BRONZE SAFETY VALVE
Specially designed for marine applications, the valve can be mounted in any position,
giving full flow through both directions. The valve includes open and closed indicator
incorporated in an ergonmic operating control.
Technical Specifications:
Components that come into contact with fluid.
Body:
Bronze CC491K (UNI 1982)
Seal:
Neoprene
Operating Knob: Fire resistant ABS
G/BSP SW
3
⁄8 "
25
1
⁄2 "
25
3
⁄4 "
31
1"
38
1 1⁄ 4 "
47
1 1⁄ 2 "
54
2"
67
F
15
15
20
25
33
38
48
A
11.4
15
16.3
19.1
21.4
21.4
25.7
V
53
53
58
63
72
78
90
L
H
67 76
67 76
73 85
84 94
97 110
103 118
124 139
Part No
1-71750
1-71751
1-71752
1-71753
1-71754
1-71755
1-71756
Available Mid 2015
GUIDI LONG BRONZE SKIN FITTINGS
The new range of long bronze skin fittings have internal
anti-rotation nibs for easy installation and can be used
with the bronze external scoop fitting.
Long Bronze Skin Fitting
Scoop
G*/BSP SW H D D1 A F Part No. Part No.
⁄4 "
1"
11 ⁄ 4 "
11 ⁄2 "
2"
21 ⁄2 "
3"
3
Scoop to be
ordered separately
32
41
49
56
69
85
100
185
206
206
207
207
238
238
47
57
67
75
88
108
122
46
57
67
75
88
108
122
180
200
200
200
200
230
230
19
24
32
37
48
63
75
2-70132
2-70133
2-70134
2-70135
2-70136
2-70137
2-70138
2-70262
2-70263
2-70264
2-70265
2-70266
2-70267
2-70268
Dimensions in mm.
Material: UNI EN 1982 CC491K (CuSn5Zn5Pb5-C)
DZR SWING CHECK VALVES
Features
• Full bore high flow rate
• Heavy duty and high
corrosion resistance
• Upper plug allows cleaning
and maintenance
• Flow direction arrow indicated
on valve body
• Horizontal mounting position
Specifications:
Body and Cap:
Cap Seal:
Temperature Limits:
Pressure Limits:
Thread:
DZR Brass CW602N (Dezincification Resistant)
EPDM
-20ºC to +120ºC
16 BAR
BSP Female thread to UNI ISO 7/1 (UNI EN 10226) DIN2999
BSP Bore A
B
1
⁄2 "
15
59 15
3
⁄4 "
20
68 16.5
1"
25
84 19
1 1⁄ 4 "
32
96 21.5
1 1⁄ 2 "
40 105.5 21.5
2"
50 125 26
C
31.5
34.5
44.5
47
53.5
63.5
Ch
26
32
39
48
55
68
Part No
1-17351
1-17352
1-17353
1-17354
1-17355
1-17356
CATALOGUE SUPPLEMENT - I
63
Gas Accessories, Johnson
Pump Circulation Pumps
NEW RANGES
PLUMBING - GAS
PROPANE REGULATOR (37MB)
Gold regulators offer highest level of
performance and safety for small to
medium LPG installations (domestic
or commercial) as a single stage low
pressure regulator.
Part No. 1-59092
Specifications:
Inlet Connection:
Outlet Connection:
Inlet Pressure
Outlet Pressure
Flow Rate LPG:
GAS WATCH CHECKER PEN
• Easy to install and efficient to use
• Safety Pressure Relief Valve as standard
• Filter on Inlet when connected directly to gas cylinder
• Maximum capacity of up to 5kg/h (69kW)
• BS EN Standard EN13785
• Simple way to check the level of gas in
your LPG bottle
• Clear green / red indicator shows the
gas level in the bottle
• Works with standard metal propane or
butane gas bottles between 200 350mm diameter.
Page 1-59300
UK POL 5⁄8 LH Male NUT Propane
⁄2 '' BSPT Female
1 - 16 bar
37 mbar
5 kgh (69kw)
1
SEE SECTION 1 FOR GAS CHANGEOVER KITS, WALL BLOCKS, GAS PIGTAILS, GAS PIPE & FITTINGS
PLUMBING - PUMPS
CM30P7-1 HEAVY DUTY MAGNETIC
DRIVEN CENTRIFUGAL PUMP
Techncial Specifications
Pump Body:
PPA
Impeller:
PPA
Shaft:
Stainless Steel
Liquid:
Water/glycol mixture; max 60% glycol, fresh water
Liquid temp.:
Min -40°C, Max +100°C
System Pressure:
2.5 Bar max
Port Size:
Ø 16mm (5⁄8 '') hose
Dry Running:
Max 30 mins
Input Power:
Max 27W
Mounting:
Separate universal bracket for flat services
Motor:
12/24V DC enclosed (as per IP67) permanent magnet,
ball bearing mounted motor, designed for continuous operation
Dimensions (LxWxH): 177 x 68 x 85mm (6.97'' x 2.68'' x 3.35'')
Weight:
0.6kg (1.3lbs) with bracket
CM Series Circulation Pumps are a line of
compact centrifugal pumps which combine
high flow rates with very low electric
current consumption, making them
ideally suited for
circulating fresh water
in live fish tanks,
heating and
cooling systems.
But not saltwater.
Model
Volts
Hose Connection
CM30P7-1
CM30P7-1
12V
24V
Ø 16mm (5/8'')
Ø 16mm (5/8'')
Back Pressure
Bar
kPA
ft
Flow
l/min USGPM
0.1
0.15
20.0
17.5
10
15
3.3
6.6
5.3
4.2
Part No.
10-24503-03
10-24503-04
CM30P7-1 with 20mm Ø Port
and CM90 also available see
Section 10 catalogue or visit:
www.aquafax.co.uk
CM90BL HEAVY DUTY MAGNETIC DRIVEN CENTRIFUGAL PUMP
Magnetic driven centrifugal pump, fitted with a brushless
electric motor with fewer wear parts for continous
operation with extra long service life. Suitable for
circulation of glycol mixture or fresh water.
Model
CM90P7-1 BL
CM90P7-1 BL
64
Volts
12
24
Part No.
10-24898-01
10-24898-02
Techncial Specifications
Pump Body:
PPA
Impeller:
PA12
Shaft:
Stainless Steel
Liquid:
Water/glycol mixture; max 60% glycol, fresh water
Liquid temp.:
Min -40°C, Max +100°C
System Pressure:
2.5 Bar max
Port Size:
Ø 38mm (11 ⁄2 '') hose
Dry Running:
Max 30 mins
Input Power:
Max 125W
Mounting:
Separate universal bracket for flat services
Motor:
Brushless 12/24 V DC enclosed (as per IP67) permanent magnet,
ball bearing mounted motor, designed for continuous operation
Capacity 0.1 Bar:
115 l/min at 0.1 bar (30.4 GPM at 8.2ft)
Capacity 0.25 Bar:
90 l/min at 0.25 bar (23.8 GPM at 8.2ft)
Dimensions (LxWxH): 272 x 121 x 150mm (10.71'' x 4.76'' x 5.90'')
Weight:
3kg (6.6lbs) with bracket
CATALOGUE SUPPLEMENT - I
CM30P7-1 & CM90BL CE marked to the following standards:
• EN55014: 1993/Radio disturbance • ISO8846: Small Craft - Electrical
devices -protection against ignition of surrounding flammable gases
• ISO10133: Small Craft - Electrical systems - extra low voltage DC
installations • 72/245/EEG, 95/54/EG Electromagnetic compatibility
Johnson Pump
Pumps, Blower & Tank
PLUMBING - PUMPS
AQUA JET WPS 3.5 PUMP WITH BYPASS
Model:
Length:
Width:
Height:
Weight:
Motor:
Body:
Valves:
Diaphragm:
Connection:
WPS 3.5 fitted with a built-in pulsation dampening
by-pass to control unwanted cycling and noise.
The five chamber Aqua Jet WPS Series provides a reliable heart for small
boat and recreational vehicle water pressure system. It’s lower initial price
is naturally attractive, but equally important, its readily serviceable design
assures low maintenance costs and years of faithful service.
It’s recommended to install an accumulator tank.
Also available:
Always use a PUMProtector inlet strainer before
Aquajet Pump Pressure Switch with
the pump intake.
Bypass (2.8b). Part No. 09-47277-01
See our catalogue Section 10 for
the full range or visit our website:
www.aquafax.co.uk.
Model
WPS 3.5
Capacity
13LPM (3.5GPM)
Cut-Off Pressure 12V Part No. Fuse Size
2.1bar/30psi
10-13395-07
10A
WPS 3.5
236.5mm
210mm
116mm
2kg
85W
PP/PPA
EPDM
Santoprene
3
⁄8" BSP/hose 1⁄2",
1
⁄2" BSP/hose 3⁄4"
24V Part No.
10-13395-08
Fuse Size
5A
Specification:
Capacity:
Voltage:
JOHNSON PUMP HEAVY DUTY RADIAL BLOWER
280m3/hr 163cfm
12V Amps: 3.9A
24V Amps: 2.5A
Dimensions:
H: 290 x W: 257 x L: 180mm
Port Connections: Inlet: 75mm Outlet: 72mm
• Designed for engine compartment ventilation prior to start-up
• Motor rated for continuous operation and can be used as air
intake or extraction to ventilate bilges, galleys, accommodation
and other compartments
• Flange mount design
• Double ball bearing motor with corrosion
resistant stainless steel shafts and screws
Description
Air 3'' 90º Bilge Blower 12V
Air 3'' 90º Bilge Blower 24V
Part No.
10-47416-01
10-47416-02
JOHNSON PUMP VIKING COMPACT MANUALLY OPERATED BILGE PUMP
The Viking Compact is a bulkhead fitting, manually operated,
self-priming, diaphragm pump designed for bilge pump
applications on boats.
Complies with ISO 15083 Small craft - bilge pumping
systems. Can be used on boats
of design categories A, B, C and D.
Specification:
Plastic materials:
Elastomers:
Shafts:
Connections:
ABS, PA 66, PP
Nitrile rubber
Stainless Steel
25mm (1") or 38mm (11⁄2 ")
hose connections
Max. Liquid temp.: +60ºC (140ºF)
Storage temp.:
-40ºC to +60ºC (-40ºF to 140ºF),
without operation and in dry condition
Dimensions:
According to fig.1
Weight:
0.7kg (1.54lbs)
CAPACITY
Output capacity depends on installation
conditions and pumping rate.
Performance given at back pressure (head)
of 10kPa (1.45psi) rated for 45 strokes per
minute: Dia. 38mm (11⁄2 ") ports, 37.5 lit/min
(9.91 USGPM) (594 USGPH).
Maximum lift:
2.1m (7')
Maximum head:
1.2m (4' )
Maximum combined
lift and head:
3.3m (11')
Description
Viking Compact w. dia 25mm (1") and dia. 38mm (11⁄2 ") ports
Part No.
10-24800-01
JOHNSON PUMP GREY WATER TANK
• Designed for use as a waste water collection tank from showers, sinks,
dishwashing machines etc.
• Easy access cover for cleaning
• Available with Ultima Switch for automatic operation to any 12/24V
pump rated up to 20A
Shows tank
• Tank is prepared for Viking Power 16 waste pumps
with pump
10-13350-03/04 (not included)
• Hose Connections:
Inlet: 3 x 19mm, 3 x 25mm 3 x 38mm
Outlet: 1 x 19mm, 1 x 25mm
• Dimensions: 185 x 280 x 340mm
• Capacity: 10L
10-1206
Description
Multiple Port Grey Water Tank c/w Ultima 12/24V Switch
Multiple Port Grey Water Tank Only
Part No.
10-1206
10-1207
CATALOGUE SUPPLEMENT - I
65
Whale Electric Freshwater
Galley Pumps
PLUMBING - WHALE
PUMP ACCUMULATOR KIT – INTEGRATED
Smooth constant flow - prevents water hammering and cycling.
One piece kit includes pump and 2 or 8L compact accumulator tank.
Easy maintenance inlet strainer
with clear lid for inspection prevents
debris from entering the pump
This integrated kit is a drop into line pre-assembled kit designed to
provide a constant reliable flow of water on board. Save time and
money fast installation.
Features and Benefits
• Combined pump and accumulator tank ensures a
smooth even flow of water to all outlets
• Compact design installs easily in convenient locations
• Reduced noise and vibration by preventing
pump cycling
Easy installation
• Easily plumbed into standard 1⁄2 " or 3⁄8 " pipework
pre-mounted kit 4 screws
(W-UF2215 has 15mm Quick Connect fittings)
and connect plumbing
• Connects directly to Whale Quick Connect 15mm
plumbing system
• Can be fitted to new or existing systems
• Includes long life Whale pressure pump
Accreditations:
• EMC compliant
• CE marked
NEW
Moulded base
drop in and fit
one piece kit
Connects directly to 15mm Quick Connect
pipework. 8ltr version suitable to connect to
1
⁄2 " flexible hose or 3⁄8 " flexible hose with
Whale adaptors (see specifications).
W-UF2215
Specifications:
Part No.
W-UF2215
W-UF2015
W-UF8025
Model:
Accumulator Kit
(includes W-UF1214)
Accumulator Kit
(includes W-UF1215)
Accumulator Kit
(includes W-UF1825)
Accumulator Tank Size:
2 ltrs (0.53 US gals)
8 ltrs (4.75 US gals)
8 ltrs (4.7 US gals)
Voltage:
12V DC
12V DC
24V DC
Recommended Fuse Size:
10 Amp
8 Amp
8 Amp
Cut Out Pressure:
3 bar (45 psi)
3 bar (45 psi)
3 bar (45 psi)
Weight:
3.9kg (8.9 lbs)
5.4kg (11.9 lbs)
5.9kg (13 lbs)
Factory Pre-charge Pressure
+/0.014 bar+/-2psi:
2.2 bar (32 psi)
2.2 bar (32 psi)
2.2 bar (32 psi)
Inlet/Outlet Connections:
Materials:
Quick Connect Whale®
15mm connections
Pump Body: Glass-filled Polypropylene Aluminium and Powder-coated Steel Diaphragms,
Valves and Feet: Monoprene®, Seals: Nitrile®, Tank: Butyl, Base: ABS, Fittings: Brass, Fasteners: Stainless Steel
Materials in contact with fluid:
Minimum Wire Size:
Glass-filled Polypropylene, Monprene®, Nitrile®, Stainless Steel, Brass
2.5 mm2 (13 AWG)
2.5 mm2 (13 AWG)
2.5 mm2 (13 AWG)
Maximum Suction Lift:
30m (99ft)
20m (66ft)
30m (99ft)
Maximum Discharge Head:
3m (10 ft)
3m (10 ft)
3m (10 ft)
W-UF2215
66
Whale Quick Connect 15mm Female
For 1⁄2 " Flexible Hose, Use W-WX1584 (supplied with kit)
For 3⁄8 " Flexible Hose, Use W-WU1215 and W-WU1280 (not supplied with kit)
CATALOGUE SUPPLEMENT - I
W-UF2015 & W-UF8025
Morsø Solid Fuel Stove
& Accessories
NARROWBOATS
MORSØ SWIFT SOLID FUEL STOVE
The Swift has clean lines and a compact frame, built with the quality and style you can expect from
a world renowned stove manufacturer. A true cast iron stove, this radiant burner is both strong and
efficient with exceptional draft control and a single fire / ash pan door. Part No. N-90025
Technical Specifications:
Rated Output (kW):
Log Length (cm):
Efficiency Net/Gross (%):
Flue Outlet:
4.5
28
76 / 69
Top or rear option
Dimensions:
Height inc. legs (mm):
Width (mm):
Depth (mm):
Leg Height (mm):
Flue Outlet Internal Diameter (mm):
NEW
546
388
438
100
125
Optional Accessories
Description
Twin Wall Flue Kit for Morsø - Straight
Twin Wall Flue Kit for Morsø - 12'' Offset
S/S Back Boiler for Morsø Stoves 8000 BTU
Flue Kit Includes:
• 2 x 1m lengths inner chimney flue pipe
• 1 x Deck Plate
• 1 x 550mm External Chimney
• 1 x External flue terminal
• 1 x Blanking cap
• 4 x Clamping rings
• 2 x Fire hearth securing brackets
• 1 x Length Self adhesive gasket
Part No.
N-90023
N-90024
N-90022
GEOCEL® FIRE BLOCK SEAL
High Temperature Resistant Sealant
A ready mixed and ready to use new
generation fire cement that will withstand
temperatures up to 1500°C. Suitable for
sealing joints on solid fuel stove flues.
Bulk Pack: 12 x 310ml cartridges:
Part No. 5-70020
Single: 310ml cartridge:
Part No. 5-70020/1
For More Solid Fuel
Stoves see our
Narrowboat
catalogue section...
INSTALLATION AND COMMISSIONING OF THE STOVE MUST BE
CARRIED OUT BY A COMPETENT PERSON. THE INSTALLER MUST
CONSIDER ALL ASPECTS OF SAFETY WHEN FITTING THE STOVE AND
FLUE PIPE SYSTEM AND INSTRUCT USERS HOW TO OPERATE AND
MAINTAIN THE STOVE SAFELY AFTER COMMISSIONING.
DELIVERY
Please contact your nearest Aquafax depot for
carriage details.
CATALOGUE SUPPLEMENT - I
67
Mastervolt Combi
Inverter/Chargers
MASTERVOLT
NEW RANGE
MASS COMBI ULTRA 12V & 24V
All components are easily connected via Masterbus
allowing easy installation, control and monitoring from
one Masterview Easy touchscreen panel.
Two AC inputs give dedicated connections for
shorepower and generator that can be adjusted to suit
the specific characteristics of each power source.
Ultra-fast controls transfer to and from the inverter
seamlessly ensuring continuous power is maintained.
The Ultra has two separate outputs, the first dedicated
to critical loads such as refrigerators, computers and
audio systems, the second is for non-preferential loads
such as water heaters. The second AC output can be
switched off automatically at any desired setting.
The high yield solar power regulator on the DC side
allows a second independent charge output thanks to
the super-efficient built-in MPPT solar charge regulator.
In addition to a main 3-stage charge function, the
Mass Combi Ultras have an integrated second charger
which (in most cases) can charge 12V or 24V
batteries, ideal to charge an engine start battery.
Active Optima Cooling ensures minimal fan use
regulating the fan speed for maximum capacity
requirements or when the ambient temperature is very
high. The Ultima provides up to 50% charging or
inverter capacity without fan cooling under normal
conditions. Perfect for night time operation.
The Mass Combi Ultra functionality goes beyond a
single stand alone operation, the design allows
multiple parallel units and 3-phase operation for larger
applications up to 35kW.
1
2
Laptop
Phone Charger
Power Point
Washing Machine
Electric Kettle
3
5
4
7
6
8
1. Generator
2. Mass Combi Ultra
3. Grid Power
4. Solar Panel
5. MasterView Easy
6. MasterShunt
7. DC Distribution System
8. AGM Starter Battery
9. Domestic Battery Bank
68
9
DC Equipment
• Switch Panel
• Digital Switching
• Engine Alternator etc.
CATALOGUE SUPPLEMENT - I
Mastervolt Combi
Inverter/Chargers
MASTERVOLT
Part No.
SINE WAVE INVERTER SPECIFICATIONS
Nom. DC voltage:
Cont. power at 40 °C, cos phi 1:
Surge capability:
Parallel configuration:
3-Phase mains configuration:
Output voltage:
Output waveform:
Max. efficiency:
Max. ripple on DC Battery:
No-load power consumption (ON/INV/OFF/OFF):
BATTERY CHARGER SPECIFICATIONS
Nom. input voltage:
Max. charge current at 40°C:
Main charging characteristic:
Second charging characteristic:
Second charge output voltage:
Second charger output current:
Battery temperature sensor:
GENERAL SPECIFICATIONS
Display / Read-out:
Dimensions (H x W x D):
Weight:
Approvals:
TRANSFER SYSTEM SPECIFICATIONS
Generator input (switched):
Mains input (switched):
AC output 1:
AC output 2 (switched):
Transfer time:
Transfer voltage range (adjustable):
Transfer frequency range (adjustable):
Power Sharing / Generator / Mains Support:
SOLAR INPUT (DC) SPECIFICATIONS
Input voltage range:
Max. PV power:
Max. input current:
Max. charge current:
MPP voltage range at nom. power:
Ground relay:
Temperature range (ambient temp.):
Cooling:
Protection degree:
Protections:
MasterBus compatible:
Model:
NEW RANGE
MASS COMBI ULTRA 12V & 24V
M38013000
M38023500
12/3000-150
24/3500-100
12V (9.5 – 15.5V)
24V (19 – 32V)
3000 W
3500 W
5400 W
7000 W
yes, up to 10 standard
yes, up to 10 standard
yes
yes
-------------------------------- 230 V - 50/60 Hz (+/- 0.005%) selectable ------------------------------------------------ True Sinewave, Thd < 1% under standard conditions ----------------90%
91%
< 10%
< 10%
16W / 2W / 0W
16W / 2W / 0W
230V (180 – 275V)
230V (180 – 275V)
150A at 14.25V
100A at 28.5V
IUoU, automatic 3-step+ for AGM/Gel/Lithium Ion/Flooded/Flooded Traction/Spiral/NiCad
----------------------------- IUoU, automatic 3-step+ or constant voltage -----------------------12V
12/24V selectable
10A
10A
yes, included as standard
yes, included as standard
LED display
LED display
--------------------------- 472 x 318 x 175mm (18.6 x 12.5 x 6.9 inches) ---------------------15kg (33.1 pounds)
15kg (33.1 pounds)
CE, E-mark, ABYC
CE, E-mark, ABYC
50A
30A
67A
50A
seamless (UPS, < 1 ms)
180 – 275V
35 – 65Hz
yes
50A
30A
67A
50A
seamless (UPS, < 1 ms)
180 – 275V
35 – 65Hz
yes
15-100V
15-100V
500 Wp
500 Wp
18A
18A
30A at 14.25V
15A at 28.5V
35-80V
35-80V
adjustable
adjustable
----------------------- -25°C to 80°C, derating > 40 °C (-13 to 176 °F) ----------------------Maintenance free Vario fans
Maintenance free Vario fans
IP23 (vertical mounting)
IP23 (vertical mounting)
over temperature, AC over load, AC short circuit, DC short circuit, high battery, low battery
yes
yes
Upcoming Models: Mass Combi Ultras 24/5000-125, 24/7000-200, 48/3500-50, 48/5000-60 and 48/7000-100
Optional
Accessories
MasterView Easy
Touch screen panel for
monitoring charge status,
power share setting &
controlling MasterBus
enabled equipment.
Part No. M77010305
MasterShunt
Use with MasterView
Easy to monitor voltage,
current, time remaining
and consumption in
percentage.
Part No. M77020100
CATALOGUE SUPPLEMENT - I
69
Mastervolt Combi
Inverter/Chargers
MASTERVOLT
NEW RANGE
MASS COMBI INVERTER CHARGERS
The mass combi combines an advanced 3-stage battery charger, and silent
inverter in one unit. Ideal for most boats and heavy mobile applications.
Power boost offers additional mains voltage from the batteries if
mains/generator power is limited.
Two separate AC outputs allow low power items to operate from the
inverter and high power demands to only operate when the generator or
mains power is online.
Mass combines are available with either Masterbus interface or ICC and
APC control panels.
Part No. (with ICC & APC Panel)
Part No. (with MasterBus Interface)
Model:
SINEWAVE INVERTER SPECIFICATIONS
Nominal DC Voltage:
Continuous Power at 25ºC, cos phi I:
Surge Capability:
Parallel Configuration:
Parallel Power Boost with Mains/Generator:
Output Voltage:
Efficiency:
DC Consumption at 230V:
Search Mode Consumption:
BATTERY CHARGER SPECIFICATIONS
Nominal Input Voltage:
Max. Charge Current (adjustable):
Primary AC Consumption (full charge):
Charge Voltage 25ºC (absorption/float):*
Charge Characteristic:
Second Charge Output:
Battery Temperature Sensor:
GENERAL SPECIFICATIONS
Display / Read-out:
Dimensions (H x W x D in mm):
Dimensions (H x W x D in inch):
Weight:
Approvals:
TECHNICAL SPECIFICATIONS
Max. Current First Output:
Max. Current Shortbreak / Inverter Output:
Transfer Time:
Grounding:
Temperature Range (ambient temp):
Cooling:
Sound Level:
Protection Degree:
Protections:
MasterBus Compatible:
OPTIONS
Remote ICC
(Part No. M70405000)
Remote APC
(Part No. M70405010)
Masterlink/MICC
(Part No. M70403105)
MasterView Easy
(Part No. M77010305)
MasterBus Combi Interface
(Part No. M77030475)
M36011601
M36011602
12/1600-60
M36012201
M36012202
12/2200-100
M36022601
M36022602
24/2600-60
12V (10-15V)
12V (10-15V)
28.5/26.5V
28.5/26.5V
1600W - 7A
2150W - 9.3A
1800W - 7.8A
2550W - 11A
3000W - 13A
4000W - 17.4A
3000W - 13A
4000W - 17.4A
No
Yes
No
Yes
Yes
Yes
Yes
Yes
----------------------------- 230V - 50Hz, +/- 0.05% (60Hz adjustable, +/- 0.05%) ------------------------------≥ 90%
≥ 90%
≥ 90%
≥ 90%
< 9W
< 9W
< 9W
< 9W
0.5W
0.5W
0.5W
0.5W
--------------------------------------------- 230V (180-265V) - 45-65 Hz-----------------------------------------------60A at 14.25V
100A at 14.25V
35A at 28.5V
60A at 28.5V
1035W - 4.5A
1656W - 7.2A
1170W - 5.1A
1965W - 8.5A
14.25 / 13.25V
14.25 / 13.25V
28.5 / 26.5V
28.5 / 26.5V
--------------------------- IUoUo, automatic 3 Step+ for Wet/AGM/Gel/Lithium Ion -----------------------------5A
5A
5A
5A
------------------------------ Included as standard with 6m (20ft) cable and telejack plug ---------------------LED Display
LED Display
LED Display
LED Display
371 x 318 x 143
496 x 318 x 156
371 x 318 x 143
496 x 318 x 156
14.6 x 12.5 x 5.6
19.5 x 12.5 x 6.1
14.6 x 12.5 x 5.6
19.5 x 12.5 x 6.1
7.8kg (17.2lbs)
11kg (24.3lbs)
11kg (24.3lbs)
11kg (24.3lbs)
----------------------------------------------- CE, ABYC A-31 ---------------------------------------------------50A
50A
50A
50A
25A
25A
25A
25A
10ms
10ms
10ms
10ms
-------------------------------------------- Yes, adjustably by DIP Switch --------------------------------------------------------------------------------- -25ºC to 80ºC, > 25ºC - 13 to 176ºF derating power ------------------------------------------------------------------------- Maintenance free Vario fans --------------------------------------------≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
≤ 48 dBA at 1m
IP23
IP23
IP23
IP23
-------------------- Over temperature, over load, short circuit, high battery, low battery ---------------------Yes**
Yes**
Yes**
Yes**
SUPPLIED WITH
SUPPLIED WITH
SUPPLIED WITH
SUPPLIED WITH
M36011601
M36012201
M36021801
M36022602
Indication of DC consumption, charge phase, AC present, failure, with on/off/’charger only’ switch, 6m (20ft) cable.
M36011601
M36012201
M36021801
M36022602
Indication of AC consumption, AC voltage, fuse value of the mains/generator connection with power sharing.
Optional
Optional
Optional
Optional
Battery consumption meter for 2 batteries, 12/24V DC with LCD read-out and Mass Inverter remote control.
Optional**
Optional**
Optional**
Optional**
Touch screen panel for monitoring charge status, power share setting & MasterBus enabled equipment control.
M36011602
M36012202
M36021802
M36022602
Integrates the Mass Combi with a MasterBus network.
* The charge characteristics can be set to your requirements **When ordered with Masterbus Interface
70
M36021801
M36021802
24/1800-35
CATALOGUE SUPPLEMENT - I
Mastervolt
Comfort System
MASTERVOLT
MASTERVOLT COMFORT SYSTEM
A one box kit designed to take the time out of system design and
specifying individual components.
Part No. M77712200.
NEW
The Comfort System consists of an inverter / charger combination,
shore power connection, battery monitoring, monitored main fused,
and a touch screen panel.
Complete overview of the Comfort System:
M36012202
M77020100
M77020200
M77049250
M77010305
M121160250
M121160000
M6708409077
Mass Combi 12/2200-100 230V
MasterShunt 500
DC Distribution 500
Fuse ANL 250A for DC Distribution Box
MasterView Easy Mk III
25m Shore power cable 3 x 2.5 mm² Cordset
MV Inlet 16A RVS
Comfort System Instruction Manual
Ideally suited for boats between 30-50ft and luxury mobile homes offering
enough power for mains power products such as a coffee make or microwave.
Using Masterbus technology, the Comfort System is easy to upgrade or add to
using other Mastervolt Masterbus enabled products.
Mastervolt Comfort System Installation Overview
3x
2.5mm2
RCD*
RCD*
Power
Output
Grid/Shore
Power
Short
Break
Output
Kettle
TV
Hairdryer
Microwave
Computer
95mm2
+
–
12V Battery bank*
>200Ah
<500Ah
Battery switch*
for winter storage
or maintenance
only
70mm2
for lengths <3m
A MasterView System configuration .mvc file
is available at mastervolt.com/marine/systems
* Not included
NEW
Inside view
Part No. 8-41324
Battery Switch*
to disconnect
consumers
Before first use,
the MasterShunt
has to be set up.
Refer to the
Direct loads/power input
user’s manual.
SNAP-TOP BATTERY BOXES
• Strong injection moulded polypropylene construction
• Snap-Top secures and locks lid to prevent contact with battery terminals
• Ventilated lid, included securing strap
• Large battery box can be adjusted to suit battery size (8-41324 only)
Description
Small
Inside Dim. (LxWxH)
279 x 200 x 247mm
(11.00'' x 7.88'' x 9.75'')
Outside Dim. (LxWxH)
359 x 254 x 267mm
(14.13'' x 10.00'' x 10.50)
Part No.
8-41322
Large
368 x 200 x 247mm
(14.50'' x 7.88'' x 9.75'')
448 x 254 x 267mm
(17.63'' x 10.00'' x 10.50)
8-41324
CATALOGUE SUPPLEMENT - I
71
Mastervolt Alternators
& Regulator
MASTERVOLT
ALPHA ALTERNATOR KITS
The main engine alternator is designed
to charge the starter battery. As a result
the combination is not ideal for fast & full
charging of other batteries such as the
service or bowthruster, especially for
charging batteries over a short time or
when a little more power is required.
M48512090
There are two options to solve this issue:
Equip the standard alternator with an Alpha Pro II MB charge regulator,
ensuring that the existing alternator works in accordance with the 3-step
charge technology instead of it’s standard 1-step method. This allows
the batteries to be charged faster within a shorter period.
Or use a powerful second Alpha alternator with Alpha Pro II MB charge
regulator. This is specifically designed for charging service batteries, and
allows you to charge quickly and turn off your engine when you moor.
M48512130
M48524075
M48524110
• Fast & complete charging of
starter/service/bowthruster batteries.
• Power supply for all consumers.
• 12V and 24V versions.
• 75 A to 150 A charge current.
• Supplied with Alpha Pro II MB charge
regulator for optimal performance &
longer-lasting batteries.
M48524150
Part No.s in
Red = To
Order Only
Part No.
Model:
Type Cabinet:
Charge Current:
Charge Voltage Absorption:
Charge Voltage Float:
Cable Length Regulator/Alternator:
Pulley (double) diameter:
Belt section:
Isolated from Mass:
Direction of Revolutions:
Weight:
Dimensions:
Mounting:
M48512090
M48512130
M48524075
M48524110
M48524150
12/90
12/130*
24/75*
24/110
24/150
A
B
B
B
C
90A
130A
75A
110A
150A
14.25V
14.25V
28.5V
28.5V
28.5V
13.25V
13.25V
26.5V
26.5V
26.5V
------------------------- 1.5m (5ft) oil resistant marine connection cable - delivered as standard ------------------------------73mm (2.9")
88mm (3.5")
88mm (3.5")
88mm (3.5")
92mm (3.6")
2xA
2xA
2xA
2xA
2xA
Yes
Yes
Yes
Yes
Yes
2
2
2
2
2
5.5kg (12.1lbs)
10.1kg (22.2lbs)
10.1kg (22.2lbs)
10.1kg (22.2lbs)
13.1kg (28.9lbs)
------------------------------------------- see www.mastervolt.com/alternators for the drawings ---------------------------------------five to six,
six o’clock
six o’clock
six o’clock
five to six,
six o’clock and
six o’clock and
five past six
five past six
Charge Regulation:
-------------- The Alpha Pro II Charge Regulator is supplied as standard with all models, see below ------------* Available with multi-groove pulley (12/130 model = Part no. M48512131 24/75 model = Part no. M48524076)
ALPHA PRO II MB CHARGE REGULATOR
The Alpha Pro II MB charge regulator is designed as a
‘fit all’ solution, just one unit is needed for both 12 and
24V applications with a simple selector switch to set
the regulator to the right voltage.
The unit can also be used on any other brand of
alternator that has a standard Bosch connector, with a
cable supplied as standard in the box.
Easy operation LEDs on the body of the regulator
indicate the charge phase.
Connection
cable delivered
as standard.
Part No.:
Link to MasterShunt:
Connection to Mastervolt alternator:
Connection to Bosch alternator:
Cooling:
Nom. output voltage:
Cable length regulator/alternator:
Cable length temperature sensor:
Connection plug regulator/alternator:
Display/read-out:
Dimensions, hxwxd:
Weight:
Approvals:
Charge characteristic:
Charge voltage Bulk:
Charge voltage Absorption:
Absorption time:
Charge voltage Float:
Temperature compensation:
Voltage compensation:
Alternator type:
Protection degree:
MasterBus compatible:
Plus connection cable
for Bosch alternator.
72
CATALOGUE SUPPLEMENT - I
M45512000
yes
yes
yes
fanless
12 V / 24 V
1.5m (5ft) oil resistant connection cable
6m (20ft)
Alpha/Mastervolt
LED display
90x109x30 mm 3.5 x 4.3 x 1.2 inches
0.4 kg 0.9 pounds
CE
IUoUo, automatic / 3-step+ for gel/AGM/wet/Lithium Ion
14.25 V / 28.5 V
14.25 V / 28.5 V
4 hours, adjustable from 2 minutes to 12 hours
13.25 V / 26.5 V
-30 mV / °C -17 mV/ °F
voltage drop compensation in DC cables up to 3V
various
IP65
yes
Mastervolt Battery
Chargers
MASTERVOLT
NEW RANGE
EASYCHARGE WATERPROOF
PORTABLE BATTERY CHARGERS
Features
• Rugged durable weather resistant housing to IP65 standard
• Charges & maintains 6V and 12V wet, AGM and Gel batteries
• 1.1A or 4.3A Models Available
• Intuitive control panel
• Ideal for use on boat, car, motorcycle and camper van
• Extends battery life
• Includes fuse 61cm battery lead with ring and alligator clip connections
• Reverse polarity protected and short circuit proof
Part No.
Nominal Output Voltage:
Total Charge Current:
DC Battery Connection:
Recommended Battery Capacity:
Nominal Input Voltage:
LED Display:
Dimensions (H x W x D)mm:
Dimensions (H x W x D) inches:
Weight:
Charge Characteristic:
Temp Range (Ambient Temp):
Protection Degree:
Protections:
M43510102
M43510402
6V or 12V
6V or 12V
1.1 A
4.3A
---------------------- Lead with ring and alligator clip connections ------------------2.2 to 40Ah
14 to 90Ah
----------------------------120/230 V (90-265 V), 50/60 Hz ---------------------------Yes
Yes
152 x 63.5 x 35.5
161 x 72 x 43.7
6.0 x 2.5 x 1.4
6.3 x 2.8 x 1.7
0.5 kg (1.1 lb)
0.9kg (2.0lbs)
--------------------- IUoUo, automatic 3 Step+ for Wet/AGM/Gel ------------------------------------------------- -20ºC to 40ºC (-4ºF to 104ºF) -----------------------------IP65
IP65
Short circuit, reverse polarity, over voltage, current limited, over temperature
EASYCHARGE WATERPROOF FIXED MOUNT BATTERY CHARGERS
Features
• Fix-mounted epoxy filled waterproof unit in
non-corrosive enclosure
• 12V 6A and 12/24V 10A Versions Available
• Can be used with wet, AGM or Gel batteries
• Includes fuse 120cm battery lead with ring terminals
• Reverse polarity protected and short circuit proof
Part No.
Nominal Output Voltage:
Total Charge Current:
No. of Battery Outlets:
Charge Current Second Output:
Recommended Battery Capacity:
Nominal Input Voltage:
LED Display:
Dimensions (H x W x D)mm:
Dimensions (H x W x D) inches:
Weight:
Approvals:
Charge Characteristic:
Temp Range (Ambient Temp):
Protection Degree:
Protections:
M43310602
M43321002
12V
12V or 24V
6A
10A @ 12V*, 5A @ 24V
1
2 x (12V) or 1 x (24V)
N/A
5A
----------------------------- 120Ah (based on 50% discharge) ----------------------------------------------------------120/230 V (90-265 V), 50/60 Hz -----------------------------Yes
Yes
76 x 152 x 51
127 x 178 x 51
3.0 x 6.0 x 2.0
5.0 x 7.0 x 2.0
1.8kg (4.0lbs)
2.8kg (6.2lbs)
---------------------------------- CE, CSA, CEC and ABYC ----------------------------------------------------- IUoUo, automatic 3 Step+ for Wet/AGM/Gel --------------------------------------------------- -20ºC to 50ºC (-4ºF to 122ºF) -----------------------------IP68
IP68
Short circuit, reverse polarity, over voltage, current limited, over temperature
*Max 10A output, 5A per bank when used to change 12V DC system.
CATALOGUE SUPPLEMENT - I
73
Marinco BEP Pro
Installer Series
ELECTRICS
NEW RANGE
MARINCO BEP PRO INSTALLER SERIES
Onboard power demands continue to increase as boaters request the comforts of home on their
boats. Marinco and BEP looked at the common products used by electrical installers every day and
made significant improvements to their design and construction. The result is a robust product line
with greater capacity and extended product life.
The valuable space saved onboard gives builders or installers greater flexibility when designing
power systems. Since Pro Installer modular assemblies are designed for fast, flexible installation in
tight spaces, it's easy to “cluster” products and reduce their mounting footprint. The common
interconnection height enables solid link bars to connect multiple Pro Installer products – a smart
design feature for watercraft.
Like all Marinco products by BEP, you can be assured of durable construction engineered
specifically to handle the challenging marine environment. High-temperature, fiber-reinforced base
material provides strength and chemical resistance.
PRO INSTALLER EZ MOUNT BATTERY SWITCHES
The new Pro-Installer EZ Mount battery switches make installation both quick and easy. Upward
facing studs on the switch base allow direct access to cable connections. The front actuator
knob and facia can then be fitted at any 90 degree rotated position to suit the cable runs in and
out of the switch. These switches can also be used with Pro-Installer link bars to create cluster
configurations to other Pro-Installer products.
• Surface mount installation
• Connects to other Pro-Installer
products using link bars
• Stainless steel nuts & washers
• Strong UV stabilized fibre
reinforced plastics
• IP66 rated
• Tested to UL1107 Ignition
Protection, CE Marked
Part No.
Operation
8-93550
8-93551
On/Off
1,2 Both, Off
8-93550
1
Fit
Base
2
Add
Wiring
3
Clip on
Actuator
8-93551
Rating (A DC)
Continuous Intermittent Cranking
400
600
1500
400
600
1500
Voltage
(V DC)
12-48
12-48
Dimensions
(LxWxH)
98 x 98 x 92mm (3.85" x 3.85" x 3.62")
98 x 98 x 92mm (3.85" x 3.85" x 3.62")
Stud Detail
2 x 10mm (3⁄8 ")
3 x 10mm (3⁄8 ")
PRO INSTALLER STANDARD MOUNT BATTERY SWITCHES
Pro Installer standard mount battery switches can be surface mounted, rear panel mounted or front panel mounted with multiple cable access options for easy
installation. The new Pro Installer design offer outstanding ergonomics engineered with materials to withstand the harsh marine environment.
• Can be surface, rear panel or front panel mounted
• Stainless steel nuts and washers
• Industry standard footprint
• Strong UV stabilized fibre reinforced plastics
• IP66 rated
• Tested to UL1107 Ignition Protection, CE Marked
8-93560 & 8-93561
Part No.
Operation
8-93560
8-93561
8-93562
8-93563
8-93564
On/Off
On/Off D/Pole
1-2-Both-Off
1-2-Both-Off*
1,1/2, Parallel, Off
Rating (A DC)
Continuous Intermittent Cranking
400
600
1500
400
600
1500
400
600
1500
400
600
1500
400
600
1500
Voltage
(V DC)
12-48
12-48
12-48
12-48
12-48
8-93562 & 8-93563
Dimensions
(L x W x H)
98 x 98 x 92mm (3.85" x 3.85" x 3.62")
98 x 98 x 92mm (3.85" x 3.85" x 3.62")
98 x 98 x 92mm (3.85" x 3.85" x 3.62")
98 x 98 x 92mm (3.85" x 3.85" x 3.62")
98 x 98 x 92mm (3.85" x 3.85" x 3.62")
8-93564
Stud Detail
2 x 10mm (3⁄8 ")
4 x 10mm (3⁄8 ")
3 x 10mm (3⁄8 ")
3 x 10mm (3⁄8 ")
4 x 10mm (3⁄8 ")
* PN 8-93563 battery selector switch is fitted with alternator field disconnect
PLEASE NOTE: THE STANDARD MOUNT BATTERY SWITCHES ARE NOT SUITABLE FOR USE WITH LINK BARS - USE EZ MOUNT INSTEAD.
74
CATALOGUE SUPPLEMENT - I
Marinco BEP
Pro Installer Series
ELECTRICS
MARINCO BEP PRO INSTALLER SERIES
Features and Benefits:
• Common interconnection height
makes it easy to ‘cluster’ products
• Modular assemblies offer unrivalled
flexibility in design/layout
• Reduced individual footprints save
additional space for the most
compact installations
• Robust construction for the harshest
of marine environments
Innovative clear covers
insulate/protect on three
sides, and include recesses
for convenient labelling
Covers feature snap-out side
skirts for additional cable entry
as required
Stainless steel studs,
washers and nuts
Tin plated copper
conductors
Radiused bar ends and
generous stud lengths
improve cable routing options
for large cables
High-temperature, fibre
reinforced base materials for
strength and chemical resistance
PRO INSTALLER HEAVY-DUTY BUSBARS
Providing a robust means to connect (bus) together the multitude large cables found in
modern electrical installations.
Specifications:
• 4 Stud-500A busbar: 8mm (5/16") stainless steel studs
• 3, 5, and 8 stud-650A busbars: 10mm (3/8") stainless
steel studs
• Studs treated with anti-seize lubricant
• 50 VDC
• Tinned CDA102 Copper conductors
• Stainless steel studs, washers, nuts for longevity
8-93502
in the marine environment
• Generous stud lengths, metric threads
Part No.:
Description::
Stud Detail:
Amps:
Dimensions (mm):
Dimensions (Inches):
Weight:
Footprint:
8-93501
3 Stud Busbar
3x 10mm (3/8")
650A
98 x 49 x 61
3.9" x 1.9" x 2.4"
294g (10.4 oz)
1x
8-93502
4 Stud Busbar
4x 8mm (5/16")
500A
98 x 49 x 61
3.9" x 1.9" x 2.4"
272g (9.6 oz)
1x
8-93503
5 Stud Busbar
5x 10mm (3/8")
650A
147 x 49 x 64
5.8" x 1.9" x 2.5"
506g (17.9 oz)
1.5x
8-93501
8-93504
8-93504
8 Stud Busbar
8x 10mm (3/8")
650A
249 x 49 x 64
9.8" x 1.9" x 2.5"
841g (29.7 oz)
2.5x
8-93503
PRO INSTALLER Z BUSBARS
Marinco BEP Products have created a completely new concept for small cable termination
with the Z-Bar range. These busbars maximize power density by utilizing high and low level
bars to optimize cable runs, saving even more installation space.
Specifications:
• 10 Way and 18 Way versions
• 4x 6mm (1/4") studs with anti-seize lubricant
• 4mm (5/32") terminals with captive lock washers
• 200A maximum per bar (2x 200A)
• 50 VDC
• Tinned CDA102 Copper conductors
• Stainless steel studs, washers, nuts for longevity in the
marine environment
• Metric threads
Part No.:
Description:
Stud Detail:
Amps:
Dimensions (mm):
Dimensions (Inches):
Weight:
Footprint*:
8-93510
10 Way Z Busbar
4x 6mm (1/4")
18 x 4mm (5/32")
2 x 200A
98 x 49 x 51
3.9" x 1.9" x 2.0"
203g (7.2 oz)
1x
8-93511
18 Way, Z Busbar
4x 6 (1/4")
18 x 4mm (5/32")
2 x 200A
147 x 49 x 51
5.8" x 1.9" x 2.0"
280g (9.9 oz)
1.5x
8-93511
8-93510
*See page 77 for footprint info.
CATALOGUE SUPPLEMENT - I
75
Marinco BEP
Pro Installer Series
ELECTRICS
PRO INSTALLER ANL FUSE HOLDERS
These ANL fuseholders offer unparalleled circuit protection choice for both the installer
and end-user. The innovative Through-Panel fuseholder (8-93522) provides superior
access for fuse inspection and replacement. Small electrical loads are catered for with the
compact 8-93520 unit while additional cable security and highest capacity is provided by
the 8-93521, featuring additional studs for separate clamping of cables or link bars.
Specifications:
• Cable connection studs: Shared 8mm (5/16") on 8-93520
• 10mm (3/8") studs on 8-93522 and 8-93521
• Fuse mounting studs: 8mm (5/16")
• Double washers allow any ANL fuse brand to be fitted
• Fuse type: ANL or ANN (fast blow)
• Swinging fuse style allows changing fuse without
removal of fastening nuts
• Amperage: determined by fuse sizing,
8-93520 (35-300A), 8-93521 (35-750A),
8-93522 (35-500A)
• 50 VDC (or determined by fuse fitted)
• Tinned CDA102 copper conductors 8-93521
• Tinned CDA260 high conductivity brass
conductors 8-93522
Part No.:
Description:
8-93520
Fuseholder, ANL
Stud Detail:
2x 8mm (5/16")
Amps:
Dimensions (mm):
Dimensions (Inches):
Weight:
Footprint*:
35 - 300A ANL
98 x 49 x 54
3.9" x 1.9" x 2.1"
143g (5.0 oz)
1x
8-93521
Fuseholder, ANL with
additional cable clamping studs
Fuse: 2x 8mm (5/16")
2x 10mm (3/8")
35 - 750A ANL
147 x 49 x 61
5.8" x 1.9" x 2.4"
330g (11.6 oz)
1.5x
*See page 77 for footprint info.
8-93521
8-93520
8-93522
Fuseholder, ANL
through panel
Fuse: 2x 8mm (5/16")
2x 10mm (3/8")
35 - 500A ANL
98 x 49 x 36*
3.9" x 1.9" x 1.4"*
298g (10.5 oz)
1x
8-93522
Please note: The through panel fuse holder 8-93522 cannot be used with link bars.
PRO INSTALLER CLASS-T FUSE HOLDERS
Class-T fusing provides the ultimate protection for high power circuits, and where
extremely fast fuse blow characteristics are required. Modern battery technologies
such as Mastervolt Lithium Ion or AGM are capable of very high short circuit
currents which may be beyond the interrupt rating of standard circuit
breakers and other types of fuse. Two sizes of Pro Installer
Class-T Fuseholder are available which accommodate fuses
from 225-400 Amps, and 450-600 Amps respectively.
Specifications:
• Cable connection studs: 10mm (3/8") studs
• Fuse mounting studs: 10mm (3/8") 225-400A holder, 12mm (1/2")
450-600A holder
• Fuse type: Class-T (JLLN / TJN / A3T)
• Maximum amperage: Determined by fuse sizing, either 400A or 600A
• 50 VDC
• High temperature, fibre reinforced plastic base provides strength and
chemical resistance
• Clear polycarbonate cover
• Tinned CDA102 Copper conductors
• Stainless steel studs, washers and nuts
for longevity in the marine environment
• Metric threads
76
CATALOGUE SUPPLEMENT - I
8-93525
8-93524
Part No.:
Description:
Stud Detail:
8-93524
ClassT Holder
4x 10mm
Amps:
Dimensions (mm):
Dimensions (Inches):
Weight:
Footprint*:
225-400A Class-T
147 x 49 x 61
5.8" x 1.9" x 2.4"
351g (12.4 oz)
1.5x
*See page 47 for footprint info.
8-93525
ClassT Holder
Fuse: 2x 12mm (0.47")
2x 10mm (3/8")
450-600A Class-T
147 x 49 x 61
5.8" x 1.9" x 2.4"
382g (13.5 oz)
1.5x
Marinco BEP
Pro Installer Series
ELECTRICS
PRO INSTALLER INSULATED STUDS
Pro Installer Insulated studs are available in single and twin stud
versions, featuring 8mm (5/16") and 10mm (3/8") variants.
A double stud version with 10mm and 8mm studs is also included
for extending outboard motor cables. The Power Tapping Plate
single stud models provide convenient termination points for
additional small cables. Pro Installer family features are replicated
with these insulated studs, generous stud length, modular footprint,
insulating covers with label recess, common interconnection height.
Part No.:
Description:
8-93531
Single 8mm Insulated
Stud with 4mm
power tapping plate
Stud Detail:
1x 8mm (5/16") 1x 8mm (5/16")
Insulated Stud
4x 4 (5/32")
Amps:
–
Power Plate 4 x 50A
Dimensions (mm):
49 x 49 x 62
49 x 49 x 62
Dimensions (Inches): 1.9" x 1.9" x 2.4" 1.9" x 1.9" x 2.4"
Weight:
74g (2.6 oz)
106g (3.7 oz)
Footprint:
0.5x
0.5x
Part No.:
Description:
8-93530
Single 8mm
Insulated Stud
8-93540
Single 10mm
Insulated Stud
8-93541
Single 10mm Insulated
Stud with 4mm
power tapping plate
Stud Detail:
1x 10mm (3/8") 1x 10mm (3/8")
Insulated Stud
4x 4 (5/32")
Amps:
–
Power Plate 4 x 50A
Dimensions (mm):
49 x 49 x 62
49 x 49 x 62
Dimensions (Inches): 1.9" x 1.9" x 2.4" 1.9" x 1.9" x 2.4"
Weight:
85g (3.0 oz)
117g (4.1 oz)
Footprint:
0.5x
0.5x
*See below for footprint info.
Specifications:
• Power tapping plate: 4x 4mm (5/16") terminals
• Maximum current through power tapping plate: 50A per terminal (4x 50A maximum)
• Note: no power passes through the stud so no amp rating is given
• 50 VDC
• High temperature, fibre reinforced plastic base provides strength & chemical resistance
• Clear polycarbonate cover with snap-out extra cable access
• Stainless steel studs, screws and nuts for longevity in the marine environment
• Insert moulded studs with metric threads
• Double studs feature ‘snap out’ insulating partition, to allow linking of studs
8-93532
Double 8mm
Insulated Stud
2x 8mm (5/16")
Insulated Stud
–
49 x 49 x 62
1.9" x 1.9" x 2.4"
98g (3.5 oz)
0.5x
8-93530
8-93532
8-93531
8-93542
Double 10mm
Insulated Stud
8-93544
Double 10mm/8mm
Insulated Stud
2x 10mm (3/8")
Insulated Stud
–
49 x 49 x 62
1.9" x 1.9" x 2.4"
122g (4.3 oz)
0.5x
1x 8mm (5/16"), &
1x 10mm (3/8")
–
49 x 49 x 62
1.9" x 1.9" x 2.4"
110g (3.9 oz)
0.5x
8-93540
8-93542
8-93541
8-93544
Pro Installer Product Footprints
See individual products for
footprint size.
CREATING YOUR PRO INSTALLER POWER DISTRIBUTION CLUSTER
Pro Installer link bars allow fast and space saving electrical connection of Pro Installer products. Made from high purity copper, the link bars are tin plated
for optimum marine electrical performance. Link bars can also be doubled to increase amperage rating for higher loads. See next page for details >>>
Pro Installer cluster showing link bars fitted.
Finished cluster with covers and EZ-Mount battery switch.
CATALOGUE SUPPLEMENT - I
77
Marinco BEP
Pro Installer Series
ELECTRICS
NEW RANGE
PRO INSTALLER LINK BARS
8-93590 (LB-1)
SE. Side to
End Linking
EE. End to End Linking
8-93591 (LB-2)
8-93593 (LBZ-1)
8-93592 (LBJ-2)
8-93596 (LBJ-3)
SS. Side to Side Linking
8-93597 (LBJ-4)
8-93594 (LBZ-2)
GAP. For small gaps between products
8-93598 (LBJ-5)
8-93599 (LBJ-6)
Ctr. Centreline Linking
Part No.
8-93590
8-93591
8-93592
8-93593
8-93594
8-93596
8-93597
8-93598
8-93599
OS. Offset Linking
Max Amps*
Description & Function
650
Short link bar 8 & 10mm studs
Link Bar 31 - 34.7mm
650
Medium link bar 8 & 10mm studs
Link Bar 35.5 - 42.5mm
650
Joiner 2-way 46 - 50mm Long link bar 8 & 10mm studs or side to side joiner 2 products
250
Link Z bus bar to Z bus bar end to end or back to back
400
Link Z bus bar to HD bus bar or fuse holder
525
3 way side to side product joiner
450
4 way side to side product joiner
400
5 way side to side product joiner
350
6 way side to side product joiner
L x W in
2.2 x 1.0
2.8 x 1.0
3.0 x 1.0
2.0 x 0.5
2.1 x 1.0
4.9 x 1.0
6.9 x 1.0
8.8 x 1.0
10.8 x 1.0
L x W mm Pack Qty
1
56 x 25
1
69 x 25
1
74 x 25
1
49 x 12
1
53 x 25
1
123 x 25
1
172 x 25
1
221 x 25
1
270 x 25
* Pro Installer links can be double for high load applications, e.g. 2 x 8-93598 5 way joiners can be use to double the maximum amp rating from 400 to 800 amps. Please note
that the amp rating reduces for studs positioned further away from the main battery +/- cable, therefore high loads should be positioned on adjacent main battery +/- cable.
Pro Installer Link Bar Selection Guide
Pro Installer
Component
HD Bus Bars
ANL Thru
Panel Fuse
Holder
ANL & Class T
Stud Fuse
Holders*
Single Insulated
Studs
HD Bus Bars
8-93590
8-93594
5-93590
N/A
8-93590
8-93591
Z Bus Bars
ANL Fuse
Holder
ANL Thru Panel
Fuse Holder
ANL & Class T
Stud Fuse Holders*
Sgl Insulated
Studs
Dbl Insulated
Studs
EZ Mount Battery
Switch On/Off
EZ Mount
Selector Switch
'Battery' Studs
EZ Mount
Selector Switch
'Common' Studs
8-93594
8-93590
5-93593
8-93594
8-93594
8-93591
N/A
N/A
8-93594
8-93590
N/A
8-93591
N/A
N/A
N/A
8-39591
N/A
N/A
8-93590
8-93594
8-93590
N/A
8-93590
8-93591
8-93591
N/A
8-93591
N/A
8-93591
SE. Link 8-93590
Gap Link 8-93590
OS. Link 8-93591
Ctr. Link 8-93590
8-93591
8-93594
SE. Link 8-93590
Gap. 8-93590
OS. Link 8-93591
Ctr. Link 8-93590
8-93591
N/A
SE. Link 8-93590
Gap. 8-93590
OS. Link 8-93591
Ctr. Link 8-93590
OS. Link 8-93590
Ctr. Link 8-93591
OS. Link 8-93591
Ctr. Link 8-93590
Z Bus Bars ANL Fuse Holder
8-93594
8-93594
8-93594
OS. Link 8-93591
Ctr. Link 8-93590
* Relates to 2 Stud Fuse Holders 8-93521, 8-93524 & 8-93525.
78
CATALOGUE SUPPLEMENT - I
N/A
N/A
N/A
Double Insulated
EZ Mount
Studs
Battery Switch
SE. Link 8-93590
Gap Link 8-93590
Gap Link 8-93592
SE. Link 8-93590
Gap Link 8-93590
N/A
OS. Link 8-39591
Ctr. Link 8-93590
Link 8-93594
OS. Link 8-39591
Ctr. Link 8-93590
N/A
SE. Link 8-93590 OS. Link 8-39591
Gap Link 8-93590 Ctr. Link 8-93590
8-93592
8-93590
8-93592
Ctr. Link 8-93591
8-93590
SS. Link 8-93592 OS. Link 8-93590
Gap Link 8-93590 Ctr. Gap Link 8-93590
OS. Link 8-93592 OS. Link 8-93590
8-93590
Ctr. Link 8-93591 Ctr. Gap Link 8-93590
8-93592
8-93590
N/A
OS. Link 8-93591 OS. Link 8-93592 OS. Link 8-93590
Ctr. Link 8-93590 Ctr. Link 8-93591 Ctr. Gap Link 8-93590
N/A
Blue Sea Dual USB
Chargers & Fuse Block
ELECTRICS
DUAL USB CHARGERS Two USB ports with protective cap
Protective dust cap with tether keeps dust and spray from shortening
the life of the charger. Made with corrosion resistant materials which
ensure a solid contact and low voltage drop.
• Compatible with popular mobile devices including Apple® products
• Protective dust cap
• Conformal coated circuit board for the harsh marine environment
• Easy to use
Dual USB Chargers (8-21016, 8-21016200, 8-21018)
Easy to install in existing 12V DC socket hole providing convenient
access for charging mobile devices
Dual USB Contura Switch Mount Chargers (8-21019, 8-21039)
Easy to install in existing Contura switch aperture providing convenient
access for charging mobile devices
Dual USB Charger Plug (8-21017)
Easy to use in common 12V DC sockets found in boats, cars,
and recreational vehicle
Specifications:
8-21016 / 8-21016200 /
8-21017 / 8-21019
2.1A DC (total)
12V DC
9-16V DC
5V DC ±5%
15mA
Yes
Yes
Yes
2.0
8-21016
8-21016200
Voltage
12V DC
12V DC
12V DC
12 /24V DC
12V DC
12 / 24V DC
Color
Black
White
Black/Silver
Black
Black
Black
NEW
8-21017
8-21018 / 8-21039
Maximum Output Current:
2.1A DC (total)
Input Voltage:
12-24V DC
Input Voltage Range:
9-32V DC
Output Voltage:
5V DC ±5%
Parasitic Current Draw:
15mA
Thermal Overload Protection:
Yes
Short Circuit Protection:
Yes
Reverse Polarity Protection:
Yes
USB:
2.0
Cut Out Dimensions:
Regulatory: FCC Part
for 8-21016/8-21016200/8-21018: 11⁄8 " (29mm) dia. hole
for 8-21019 / 8-21039: 1.45" x 0.83" (36.83mm x 21.08mm) 15: Subpart B Compliant
Part No.
8-21016
8-21016200
8-21017
8-21018
8-21019
8-21039
NEW
NEW
8-21018
8-21019 / 8-21039
12V SOCKET-PLUG SYSTEM
Description
Dual USB Charger Socket
Dual USB Charger Socket
Dual USB Charger Plug
Dual USB Charger Socket
Dual USB Charger Switch Mount
Dual USB Charger Switch Mount
NEW white socket
now available.
Part No. 8-21011200
NEW
See Section 8, page 78
for complete system
ST BLADE SPLIT BUS FUSE BLOCK Screw Terminal
Split ATO®/ATC® fuse block with ground and insulating cover. For use when
a mix of switched and 24-hour circuits are desired in the same block.
• Provides two isolated groups of six ATO®/ATC® circuits
• For use with either two isolated batteries or with a single battery providing
a mix of 24 hour and switched circuits
• Screw terminals for securing wires accept ring terminals
• One-piece stainless flange nuts ensure safe and secure connections
• Clear insulating cover with label recesses and storage for two fuses,
satisfies ABYC/USCG insulation requirements
• Easy to open, push button latch for easy access to fuses
• Tin-plated copper buses and fuse clips
NEW
• Fuses sold separately (see Section 8)
Specifications
Voltage Max. Operating:
Amperage Max. Operating:
Amperage Max. Operating:
Fuse Type:
Screw Terminal:
Mounting:
32V DC
30A (per circuit)
100A (per block)
ATO® or ATC® Fuses
#8-32 Screws with captive star lock washer
#8 Screw (M4)
Part No. Circuits
8-25032
12
Cover
Yes
Negative Bus
#10-32 stud
Positive Bus
#10-32 stud
CATALOGUE SUPPLEMENT - I
79
Blue Sea Busbars &
Fuse Blocks
ELECTRICS
NEW RANGE
ST-BLADE BATTERY TERMINAL
MOUNT FUSE BLOCK Screw Terminal.
BATTERY TERMINAL MOUNT BUSBARS
Easy to install.
Positive and Negative
Part No. 8-22340
Easily add up to 4 fused circuits with insulating cover
to the terminal of a battery. Provides power to new
accessories in your boat or vehicle.
•
•
•
•
•
•
•
Easy to install 4 ATO®/ATC® fused circuits
Mounts on the battery terminal stud
Screw terminals for securing wires
Four Nylon insulated ring terminals included
Insulating cover included
Accepts small format circuit labels (see Section 8, p.77)
Includes 1 fuse (see Section 8, p.51 for blade fuses)
Part No. 8-25023
Specifications:
Voltage Max. Operating:
Amperage Max. Operating:
Amperage Max. Operating:
Fuse Type:
Screw Terminal:
Mounting Thru-hole:
Part No. 8-25023
32V DC
30A (per circuit)
100A (per block)
ATO® or ATC® Fuses
#8-32 Screws with
captive star lock washer
Clearance for 3/8" [M10] stud
Specifications
Continuous Rating:
Voltage Max. Operating:
Bus Material:
Mounting Thru-hole:
Screw Terminal:
Regulatory:
Designed to meet ISO
8846 and SAE J1171
external ignition
protection requirements.
Pending Testing.
Screw Terminal. Easily installed battery terminal
mount 4 ATO®/ATC® Fuse Block and negative BusBar.
8-21990
Operating Frequency:
80
12/24V DC
5-30V DC
Male Quick Connect
25mA @ 30V DC
5mA @ 5V DC
2900 ± 250 Hz
3 ± 25% Beeps/Second
• 1,000 Amp busbar for large complex wiring systems
• Tin plated pure electrical copper for maximum conductivity
• Stepped bus design offers two elevations for conductors which doubles the density of
the wire loom compared to traditional bus bars
• Busbar and fuse block elevations match common fuse blocks allowing for multiple fuse
block attachment, eliminating the need for connecting cables
• One-piece serrated flange nuts ensure correct and secure connections
• Stainless steel 8-32 screws with captive lock washers for securing smaller gauge wires
• Busbar may be cut to a shorter length to accommodate constricted spaces
• Bi-directional busbar end caps allow the ganging of additional busbars
• Snap on insulating cover meets ABYC & USCG requirements & includes label recess
• Models available to accommodate
either 3⁄8 " or 5⁄16 " terminals
8-21991
Specifications:
Continuous Rating:
Voltage Max. Operating:
Mounting Holes:
Bus Material:
Audibly alerts operator
• Adjustable volume by rotating bezel
• Tamper resistant front mounting case
• Threaded attachment ring
• Fits any 1'' round aperture
Specifications:
Nominal Voltage:
Operating Voltage:
Terminal Type:
Operating Current:
• Easy to install 4 ATO®/ATC® fused circuits
• Mounts on the battery terminal stud
• Screw terminals for securing wires
• Eight nylon ring terminals included
• Includes 8-25023 and 8-22340
• Insulating cover included
Part No. 8-25024
Complex wiring systems require a single point to consolidate large
and small conductors. The PowerBar 1000 offers a 1,000A busbar
with various size studs and screws to connect conductors and fuse
blocks. A snap-on insulating cover is included in retail packages.
FLOYD BELL TURBO SERIES ALARM
Part No. 8-21070
ST-BLADE BATTERY TERMINAL MOUNT FUSE BLOCK KIT
POWERBAR 1000 - 1000A Common BusBar
100A DC
32V DC
Tin-Plated Copper C11000
Clearance for Ø3/8 [M10] stud
#8-32 screws with Captive Star
Lock washer
8-21993
8-21992
1000A
150V
Accepts #10 (M5) Screws
Tin-Plated Copper C11000
CATALOGUE SUPPLEMENT - I
Part No.
8-21990
8-21991
8-21992
8-21993
Cover
Yes
Yes
Yes
Yes
Terminal Stud
8 × 3 ⁄ 8" - 8
12 × 3 ⁄ 8" - 12
8 × 5 ⁄ 16" - 8
12 × 5 ⁄ 16" - 12
Terminal Screw
5 x #10-24, 11 x #8-32
5 x #10-24, 11 x #8-32
5 x #10-24, 11 x #8-32
5 x #10-24, 11 x #8-32
Lewmar 110TT Thruster
& CRW400 Windlass
SAILING
NEW RANGES
LEWMAR 110TT THRUSTER
Also Available As A Thruster Kit
Kit Includes:
• Lewmar 110TT Thruster
• Lewmar Joystick Control (see below)
• BEP Fuse Block and Fuse
• BEP Battery Master Switch
Part No. L59110K
• Perfect for small craft up to 28ft
• Powerful 1.5kW 12V compact motor
• Extremely lightweight maintenance free composite 5
blade propeller giving high thrust and quiet operation
• No anode needed
• Plug ‘n’ Play joystick control
4 Wire Joystick Control Loom
Length
2m
7m
10m
14m
18m
22m
2m extension
Simple Joystick Control
Part No. L589094
• Ideal entry level control
of thrusters
• Features On/Off illumination
• Easy installation connection
• Auto-Shut off not available
Part No.
Model
L591101 110TT1.5
Voltage
12
Power
Kw HP
1.5 2.0
Tunnel Thrust Current
Fuse
Weight
Ø mm Kgf lb Draw (A) Rating (A) kg lb
110
28 62
230
200
10 22
A
mm in
123 4 5⁄8
Part No.
L589021
L589016
L589017
L589018
L589019
L589020
L589015
GRP Thruster Tube 110mm Dia.
Length
75cm 2' 6''
100cm 3' 3''
B
mm in
208 8 3⁄16
Part No.
L589402
L589403
C
mm
110
in
4 1⁄ 3
D
mm in
64 2 1⁄2
CAPTIVE REEL WINDLASS CRW400
Lewmar’s new CRW400 windlass represents a
step-change in engineering and design for
small boat windlasses. Built around a stainless
steel chassis with composite bearing
technology and a robust UV-stabilised ABS
shell, the CRW400 is salt-water resistant and
suitable for boats up to 30ft.
Lewmar’s unique “level wind” feature ensures that the rode is always stowed
neatly on the drum, ensuring tangle free anchoring and maximum stowage
capacity every time. In addition, the windlass features load detection, allowing
effective “drift” fishing to be performed. An auto-stop is also included, ensuring a
safe number of wraps remain on the drum when anchoring in deep water.
Full UV-stabilised ABS housing
incorporates clear viewing window,
IP67-rated switchgear and integrated
protected electronics housing.
Part No.
Motor
Power
L66910441 400W
Max Pull
275kg (605lb)
Manufactured in robust acetal, a
compact worm and wheel gear system
powers the rode feeder arm, thereby
neatly laying the rode on the drum.
Max Line Speed
Normal
m/min ft/min Current Draw
25
82
15A
• Rode stowage without the need for a locker
• Self locking – no need for cleat or chain stopper
• Fully remote operation - can be deployed and
retrieved from the helm
• High quality materials and construction
• Level-wind technology prevent spooled line bunching
• Pre-fitted with 35m (115ft) of 6mm (1⁄4 '') anchor rode
• All stainless steel 316 chassis / ABS UV stabilised case
An integrated switch is fitted to the rear of the housing, or optional
remote controls can be fitted. A clear window means that correct
functioning of the windlass can be observed, with no risk of
trapping fingers or clothing in the winding drum.
Reliable gear driven mechanism
perfectly synchronises slider
arm movement.
The composite rode feeder arm
includes a sprung load-detecting
device. This prevents the unit from
paying-out when the line is slack.
Max Anchor
Weight
Circuit
Breaker
16kg (40lb)
30A
Length
mm in
Width
mm
in
Height
mm in
365
303
188
143⁄8
1115⁄16
CATALOGUE SUPPLEMENT - I
7 2⁄ 5
81
Lewmar CPX Vertical
Windlasses
SAILING
NEW RANGE
CPX VERTICAL WINDLASS
The CPX vertical lightweight windlass range compliments
the current V Range.
These windlasses feature the tried and tested worm-wheel
gearbox architecture and use quality materials throughout
- hard anodised aluminium for the base and cast stainless
steel for the gypsy top cap and chain pipe cover.
• 15% lighter than comparable all-stainless windlass
• New architecture with reduced parts
• Easier to service
• Highly reliable, light weight, high performance windlass
• IP68 motor gearbox available on request
CPX Gypsy Only
CPX1/2/3 DIMENSIONS
CPX Gypsy Drum
For CPX4 dimensions
see www.lewmar.com
or product manual.
CPX1/2/3 COMPLETE KITS
Gypsy Only Part No.
L6671011006
L6671011000
L6671011001
L6672011006
L6672011001
L6672011002
L6672011003
L6672211001
L6672211002
–
Model
CPX1
CPX1
CPX1
CPX2
CPX2
CPX2
CPX2
CPX3
CPX3
CPX3
Windlass Kit includes: Deck unit, gypsy, Motor gearbox, rocker switch, circuit breaker and contactor.
Gypsy No. - Chain Description
006- 6mm ISO 4565, 1⁄4 " G40*, 1⁄4 " BBB
000- 7mm ISO 4565, 1⁄4 " G40*, 1⁄4 " BBB
001- 8mm DIN 766, 8mm ISO 4565, 5⁄16 " G40
006- 6mm ISO 4565, 1⁄4 " G40*, 1⁄4 " BBB
001- 8mm DIN 766, 8mm ISO 4565, 5⁄16 " G40
002- 10mm DIN 766, Campbell 3⁄8 " S4
003- 10mm ISO, Campbell 3⁄8 " S3, Lewmar 9.5mm G40
001- 8mm DIN 766, 8mm ISO 4565, 5⁄16 " G40
002- 10mm DIN 766, Campbell 3⁄8 " S4
003- 10mm ISO, Campbell 3⁄8 " S3, Lewmar 9.5mm G40
Voltage
12V
12V
12V
12V
12V
12V
12V
12V
12V
12V
SPECIFICATIONS
Model
CPX1 12V
CPX2 12V
CPX3 12V
CPX4 12V
82
Motor
Power
Watt
700
700
1000
1600
Max Pull
kg
lb
454
650
890
1250
1000
1433
1962
2750
Working Load
Limit
kg
lb
113
163
215
313
250
358
473
688
Max Line
Speed
m/min ft/min
19
21
28
25
CATALOGUE SUPPLEMENT - I
65
69
92
82
Normal
Current Draw
Amp
Circuit
Breaker
Amp
80
80
85
125
90
90
110
150
For Foot
Switches
see Lewmar
section
For 285 Series
Circuit Breakers
see Section 8
App Weight
Gypsy Only
kg
lb
App Weight
Gypsy/Drum
kg
lb
17.5
17.5
20.0
26.5
20.0
20.5
23.0
33.5
38.5
38.5
44.0
58.3
44.0
45.1
50.6
73.7
Please contact Aquafax for availability &
additional sizes Tel: 023 8045 4045
Lewmar CPX Vertical
Windlasses
SAILING
2 Motor Gearbox (Inc. contactor)
1 Deck Unit
Part No.
L69000493
L69000480
L69000483
L69000494
L69000495
3
NEW RANGE
CPX1/2/3/4 SPECIFY YOUR WINDLASS
Description
CPX1 Gypsy only
CPX2/3 Gypsy only
CPX2/3 Gypsy Drum
CPX4 Gypsy only
CPX4 Gypsy Drum
Part No.
L68001042
L68001043
L68001044
L68001045
L68001046
CPX1/2/3/4 GYPSY SPECIFICATIONS
Part No
Gypsy No.
L68001047
006
L68001048
000
L68001049
001
L68001050
002
L68001051
003
L68001063
201
L68001064
202
L68001065
203
L68001066
204
CPX OPTIONAL ACCESSORIES
Description
CPX1 - 12V
CPX2 - 12V
CPX2 - 24V
CPX3 - 12V
CPX3 - 24V
IP68 motor
gearbox
available
to order
Part No.
L66840054
L66840056
L68000866
L29140017
Part No.s in Red = To Order Only
*G40 = Grade 40 Short Link Chain
Chain Description
6mm ISO 4565, 1⁄4 " G40*, 1⁄4 " BBB
7mm ISO 4565, 1⁄4 " G40*, 1⁄4 " BBB
8mm DIN 766, 8mm ISO 4565, 5⁄16 " G40
10mm DIN 766, Campbell 3⁄8 " S4
10mm ISO, Campbell 3⁄8 " S3, Lewmar 9.5mm G40
8mm DIN 766, 8mm ISO 4565, 5⁄16 " G40, 5⁄16 " Campbell S4
10mm DIN 766, 5⁄16 " Campbell S3, 3⁄8 " Campbell S4, 9.5mm G30
10mm ISO 4565, 3⁄8 " Campbell S3, Lewmar 9.5mm G40
12mm ISO 4565, 13mm DIN 766
CPX0 VERTICAL WINDLASS
The CPX0 anchor windlass is aimed at the ever increasing number of
smaller craft fitting powered units, filling the gap at the smaller end of the
CPX range for boats between 24ft and 36ft.
It features the tried and tested worm-wheel gearbox architecture and
uses quality materials throughout - hard anodised aluminium for the base
and cast stainless steel for the gypsy top cap and chain pipe cover.
• Lightweight design
• 500W or 700W motors
• Dual chain gypsy
• Highly reliable gearbox design
Description
Gypsy Only manual recovery kit
Gypsy Drum manual recovery kit
3 Gland Bulkhead fitting
Manual handle
12-14mm
12-14mm
12-16mm
12-16mm
16mm
12-14mm
16mm
16mm
18-20mm
Rope Description
(1⁄2 '')
3-strand and 8-plait
(1⁄2 '')
3-strand and 8-plait
(1⁄2 '' - 5⁄8 '') 3-strand and 8-plait (5⁄8 '' only)
(1⁄2 '' - 5⁄8 '') 3-strand and 8-plait (5⁄8 '' only)
(5⁄8 '')
3-strand and 8-plait
(1⁄2 '')
3 strand hard lay up
(5⁄8 '')
3 strand hard lay up
(5⁄8 '')
3 strand hard lay up
(3 ⁄4 '')
3 strand hard lay up
To Fit
CPX1/2/3
CPX1/2/3
CPX1/2/3
CPX1/2/3
CPX1/2/3
CPX4
CPX4
CPX4
CPX4
Stainless steel
chain pipe cover
and gypsy cap
Lightweight cast
aluminium base hard anodised black
6/7mm, 1⁄4 " dual chain and
8mm, 5⁄16 " gypsy options
CPX0 BASIC WINDLASS KITS
Basic windlass kit includes: Deck unit, Motor gearbox, Solenoid & Gypsy
Part No.
L66910422
L66910423
L66910424
L66910425
L66910426
L66910427
L66910428
L66910429
Description
500W 6mm-7mm-1⁄4 " with Chain Counter Sensor
500W 6mm-7mm-1⁄4 " no Sensor
500W 8mm-5⁄16 " with Chain Counter Sensor
500W 8mm-5⁄16 " no sensor
700W 6mm-7mm-1⁄4 " with Chain Counter Sensor
700W 6mm-7mm-1⁄4 " no sensor
700W 8mm-5⁄16 " with Chain Counter Sensor
700W 8mm-5⁄16 " no sensor
CPX0 EXTENDED WINDLASS KITS
Extended windlass kit includes: Deck unit, Motor gearbox,
Solenoid, Gypsy, Rocker switch and circuit breaker
Part No.
L66910437
L66910438
Description
500W 6mm-7mm-1⁄4 " with chain counter sensor & switch kit
500W 8mm-5⁄16 " with chain counter sensor & switch kit
Model
Max Pull
CPX0 - 500W/12V
CPX0 - 700W/12V
410 kg
600 kg
900 lb
1320 lb
Working Load Limit
103 kg
150 kg
226 lb
330 lb
Please contact Aquafax for availability
Tel: 023 8045 4045
Max Line Speed
14 m/min
15.5 m/min
46 ft/min
51 ft/min
Normal
Current Draw
Circuit
Breaker
75A
105A
70A
90A
App Weight
Gypsy Only
9.2 kg
17 kg
20.2 lb
37.4 lb
CATALOGUE SUPPLEMENT - I
83
Lewmar HTX Blocks
SAILING
HTX BLOCKS
Years of design and manufacturing experience, combined with
collaboration with boat builders, designers, and sailors, has
resulted in the new Lewmar HTX Hardware Range. Drawing upon
the design of the racing range, the HTX blocks are constructed
from a minimal number of alloy parts, providing enhanced reliability.
Additional Information
Post Diameter:
Shackle Pin Diameter:
Max Line Size:
Fits Traveller Upstand:
Fit Snap Shackle:
Working Load Limit:
Breaking Load:
Size 50
9.4mm (3 ⁄8 ")
5mm (3 ⁄16 ")
10mm (8mm fiddle)
3
⁄8 '' (5⁄16 '' fiddle)
Sz1NTR
L29926040*
800kg (1760lb)
1600kg (3520lb)
• Alloy cheeks
• High Load capacity and large line size
• Side thrust ball bearings
• Head design inspired by Lewmar racing range with
swivel head mechanism locking through a grub screw
Size 60
11.9mm (15 ⁄32 ")
6mm (1 ⁄4 ")
12mm (10mm fiddle)
1
⁄2 '' (3 ⁄8 '' fiddle)
Sz1HTX
L29927240
1100kg (2425lb)
2200kg (4850lb)
Size 72mm
16.5mm (21 ⁄32 '')
9.8mm (3⁄8 '')
14mm (12mm fiddle)
9
⁄16 '' (1 ⁄2 '' fiddle)
Sz2NTR & HTX
L29929040
2000kg (4400lb)
4000kg (8800lb)
Size 90mm
19.8mm (25 ⁄32 '')
10mm (3⁄8 '')
16mm
(5⁄8' '')
Sz3NTR
–
3500kg (7700lb)
7000kg (15400lb)
Single
Part No.
L29195001
L29195002
L29195003
L29195004
L29195005
L29195009
L29195010
L29195021
L29195031
L29195034
L29195037
L29195039
L29195047
L29196001
L29196002
L29196003
L29196004
L29196005
L29196009
L29196010
L29196021
L29196031
L29196034
L29196039
L29196047
L29197201
L29197202
L29197204
L29197221
L29197231
L29197234
L29197237
L29197239
L29197247
L29199001
L29199004
84
Size
50
50
50
50
50
50
50
50
50
50
50
50
50
60
60
60
60
60
60
60
60
60
60
60
60
72
72
72
72
72
72
72
72
72
90
90
Description
Single
Double
Triple
Single Becket
Double Becket
Single Becket & cam
Triple Becket & cam
Toghead
Single Fiddle
Single Fiddle Becket
Fiddle & cam
Fiddle Becket & cam
Single Web/Lash
Single
Double
Triple
Single Becket
Double Becket
Single Becket & cam
Triple Becket & cam
Toghead
Single Fiddle
Single Fiddle Becket
Fiddle Becket & cam
Single Web/Lash
Single
Double
Single Becket
Toghead
Single Fiddle
Single Fiddle Becket
Fiddle & cam
Fiddle Becket & cam
Single Web/Lash
Single
Single Becket
Weight g (oz)
139 (4.76)
217 (7.65)
305 (10.76)
150 (5.29)
232 (8.18)
320 (11.29)
511 (18.02)
160 (5.64)
165 (5.82)
175 (6.17)
335 (11.82)
346 (12.20)
80 (2.8)
215 (7.58)
331 (11.67)
426 (15.03)
226 (7.97)
319 (11.25)
414 (14.60)
710 (25.04)
227 (8.01)
257 (9.06)
269 (9.49)
460 (16.22)
148 (5.2)
445 15.70
552 19.47
482 17.00
410 14.46
530 18.69
560 19.75
748 26.38
776 27.37
735 25.92
936 33.01
CATALOGUE SUPPLEMENT - I
Double
Triple
Single Fiddle
Single Becket
Please contact Aquafax for more
information on Lewmar HTX Sail Boat
Hardware. Tel: 023 8045 4045