ONE HOME, ONE CHOICE
Interior & Exterior
Luminaire Range
QUALITY
INTEGRITY
REASSURANCE
www.homedownlights.co.nz
Downlight Classifications
& Marking Labels
Closed & Abutted - CA ratings
CA
80°C
ABUTTED ONLY
Maximum temperature
allowed on any part
of the downlight that
comes into contact with
insulation is 80ºC.
CA
135°C
ABUTTED
ONLY
Maximum temperature
allowed on any part
of the downlight that
comes into contact with
insulation is 135ºC.
Insulation must be
abutted to the sides of
the fixture.
Insulation must be
abutted to the sides of
the fixture.
20W max. CFL.
100W max. GLS.
IC- Insulation Contact
i.e. can be covered
Blanket insulation may
abut and cover these
downlights.
IC-F downlights are
designed to have openings
no bigger than 1mm.
Maximum temperature
of 80ºC applies.
No maximum temperature
applies to insulation.
A fire rated downlight
means that it has been
tested to maintain a
barrier between the
room and ceiling space
during a fire for 30/90
minutes.
www.homedownlights.co.nz
2
A division of Gerard Lighting (NZ) Ltd.
Interior Range
HD109TC
HD109/SQ/TC
HD110TC
HD110/SQ/TC
HD122
HD60
Eclipse SmartLED Dimmer
4
5
6
7
8
9
11
LED Range
L E D
L I G H T I N G
L E D
L I G H T I N G
HL12-NF
HL12-WF
HL94LED-IC
HL122LED-ICF
HL109LED-ICF
HL109LED/EXT
Phoenix HL88F-IC Fire Rated
HL-LED-LEAD
Kameleon “Uni-Fit” Range
12
13
14
15
16
17
18
19
20-21
Exterior Range
Arch Down HE2291BLK
Arch Up/Down HE2292BLK
Tablet Down HE2162BLK
Tablet Up/Down HE2161BLK
Linear Round HE1003SBLKRD
Hourglass Round HE1002SBLKRD
Linear Square HE1013SBLKSQ
Hourglass Square HE1012SBLKSQ
Brick Up/Down HE2041BLK
“The Giants” IP66 LED Range
22
23
24
25
26
27
28
29
30
31
Symbol Guide:
Paintable
Ceiling Ring
Easily
Removable
Double
Insulated
3
Dimmable
HD109TC
CA
135°C
ABUTTED
One of NZ’s largest-selling
downlights
ONLY
• Designed for 100W GLS/T2,
CFL-I/70W Eco Halogen or LED Retrofit
• 100mm dia. hole cut out
• Complete with Thermal Cut-out control
• Complies with AS/NZS60598.2.2:2001 Amendment A
• CA135 classification
• IP20
• Weight: 330gms
• Ceramic Vossloh-Schwabe E27 lampholder
• Paintable round white ceiling bezel
• For indoor use only
NB: White Ceiling Bezel and Polished Silver
Reflector fitted as standard.
HD109TC
Polished Silver
Reflector
HD109TC/03
Satin Silver
Reflector
HD109TC
White Round
Bezel (standard)
137mm
OPT I ON S
HD109TC
100mm dia.
hole cut out
120mm dia.
overall
HD 109 - 100W GLS
-120° -150° -180° 150°
-90°
120°
(m) Actual lux
dia.
(m)
1 237
90°
3.33
2 58
-60°
6.66
60°
3 26
200
9.99
118°
4 15
-30°
400
30°
5
2m
cd/1000lm
0°
Beam Angle 118° L.O.R: 75.0%
Reflectance
C W
F
70 50 20
30
10
50 50 20
30
10
30 50 20
30
10
0
0
0
Room Index
0.75 1.0 1.25 1.50
#N/A#N/A .64 .67
#N/A#N/A .60 .63
#N/A#N/A .57 .60
#N/A#N/A .63 .65
#N/A#N/A .59 .62
#N/A#N/A .56 .59
#N/A#N/A .61 .64
#N/A#N/A .58 .61
#N/A#N/A .55 .59
#N/A#N/A .54 .56
1m
2.0
.72
.68
.66
.70
.67
.64
.68
.65
.63
.61
2.5
.75
.72
.69
.72
.70
.68
.70
.68
.66
.63
13.32
0
1m
3.0
.77
.74
.72
.74
.72
.70
.72
.70
.68
.65
4.0
.79
.77
.75
.76
.74
.73
.74
.72
.71
.68
2m
5.0
.81
.79
.77
.78
.76
.75
.75
.74
.72
68
DO NOT COVER
D 0.5m
Minimum distance to
flammable object.
5
HD109/13/TC
Polished Chrome
Ceiling Plate
HD109/14/TC
Brushed Chrome
Ceiling Plate
HD109/55/TC
Silver painted
Bezel
RoHS
compliant
www.homedownlights.co.nz
4
A division of Gerard Lighting (NZ) Ltd.
HD109/SQ/TC
CA
135°C
ABUTTED
Popular HD109 downlight
with square ceiling bezel
•
•
•
•
•
•
•
•
•
•
ONLY
Designed for 100W GLS/T2,
CFL-I/70W Eco Halogen or LED Retrofit
100mm dia. hole cut out
Complete with Thermal Cut-out control
Complies with AS/NZS60598.2.2:2001
Amendment A
CA135 classification
IP20
Weight: 382gms
Ceramic Vossloh-Schwabe E27 lampholder
Paintable square white ceiling bezel
For indoor use only
NB: White Ceiling Bezel and Polished Silver
Reflector fitted as standard.
HD109/SQ/TC
Polished Silver
Reflector
HD109/
SQ/03/TC
Satin Silver
Reflector
HD109/SQ/TC
White Square
Bezel (standard)
137mm
OPT I ON S
HD109/SQ/13/TC
Polished Chrome
Ceiling Plate
HD 109 - 100W GLS
-120° -150° -180° 150°
-90°
120°
90°
(m) Actual
lux
1
237
2
-60°
60°
3
200
4
-30°
400
30°
Room Index
0.75 1.0 1.25 1.50
#N/A#N/A .64 .67
#N/A#N/A .60 .63
#N/A#N/A .57 .60
#N/A#N/A .63 .65
#N/A#N/A .59 .62
#N/A#N/A .56 .59
#N/A#N/A .61 .64
#N/A#N/A .58 .61
#N/A#N/A .55 .59
#N/A#N/A .54 .56
dia.
(m)
3.33
58
6.66
26
9.99
118°
15
5
2m
cd/1000lm
0°
Beam Angle 118° L.O.R: 75.0%
Reflectance
C W
F
70 50 20
30
10
50 50 20
30
10
30 50 20
30
10
0
0
0
HD109/SQ/TC
120 x 120mm
square
100mm dia.
hole cut out
1m
2.0
.72
.68
.66
.70
.67
.64
.68
.65
.63
.61
2.5
.75
.72
.69
.72
.70
.68
.70
.68
.66
.63
13.32
0
1m
3.0
.77
.74
.72
.74
.72
.70
.72
.70
.68
.65
4.0
.79
.77
.75
.76
.74
.73
.74
.72
.71
.68
2m
5.0
.81
.79
.77
.78
.76
.75
.75
.74
.72
68
HD109/SQ/14/TC
Brushed Chrome
Ceiling Plate
DO NOT COVER
D 0.5m
Minimum distance to
flammable object.
5
HD109/SQ/55/TC
Silver painted
Bezel
RoHS
compliant
www.homedownlights.co.nz
5
A division of Gerard Lighting (NZ) Ltd.
HD110/TC
CA
80°C
Designed specifically for
CFL-I lamps
•
•
•
•
•
•
•
•
•
•
ABUTTED ONLY
Designed specifically for CFL-I lamps.
Not suitable for GLS lamps
100mm dia. hole cut out
Complete with Thermal Cut-out control
Complies with AS/NZS60598.2.2:2001 Amendment A
CA80 classification
IP20
Weight: 394gms
Ceramic Vossloh-Schwabe E27 lampholder
Paintable round white ceiling bezel
For indoor use only
HD110TC
White Round
Bezel (standard)
OPT I ON S
NB: White Ceiling Bezel and Satin Silver
Reflector fitted as standard.
HD110/TC
166mm
HD110/13/TC
Polished Chrome
Ceiling Plate
100mm dia.
hole cut out
120mm dia.
overall
HD 110 - 20W CFL-I Spiral T3
-120° -150° -180° 150°
120°
-90°
90°
-60°
60°
(m) Actual
lux
1
228
2
3
100
4
-30°
200
30°
5
cd/1000lm
0°
Beam Angle 103° L.O.R: 52.2%
dia.
(m)
2.51
57
5.02
25
7.53
103°
14
2m
HD110/14/TC
Brushed Chrome
Ceiling Plate
1m
0
10.04
1m
2m
DO NOT COVER
D 0.5m
5
Minimum distance to
flammable object.
HD110/55/TC
Silver painted
Bezel
RoHS
compliant
www.homedownlights.co.nz
6
A division of Gerard Lighting (NZ) Ltd.
HD110/SQ/TC
CA
80°C
Designed specifically for
CFL-I lamp with square
ceiling bezel
•
•
•
•
•
•
•
•
•
•
ABUTTED ONLY
Designed specifically for CFL-I lamps.
Not suitable for GLS lamps
100mm dia. hole cut out
Complete with Thermal Cut-out control
Complies with AS/NZS60598.2.2:2001 Amendment A
CA80 classification
IP20
Weight: 394gms
Ceramic Vossloh-Schwabe E27 lampholder
Paintable round white ceiling bezel
For indoor use only
HD110/SQ/TC
White Square Bezel
(standard)
OPT I ON S
NB: White Ceiling Bezel and Satin Silver
Reflector fitted as standard.
100mm dia.
hole cut out
HD110/SQ/TC
166mm
HD110/SQ/13/TC
Polished Chrome
Ceiling Plate
120 x 120mm
ceiling bezel
HD 110 - 20W CFL-I Spiral T3
-120° -150° -180° 150°
-90°
120°
90°
(m) Actual
lux
1
228
2
-60°
60°
3
100
4
-30°
200
30°
cd/1000lm
0°
Beam Angle 103° L.O.R: 52.2%
5
dia.
(m)
2.51
57
5.02
25
7.53
103°
14
2m
HD110/SQ/14/TC
Brushed Chrome
Ceiling Plate
1m
0
10.04
1m
2m
DO NOT COVER
D 0.5m
5
Minimum distance to
flammable object.
HD110/SQ/55/TC
Silver painted
Bezel
RoHS
compliant
www.homedownlights.co.nz
7
A division of Gerard Lighting (NZ) Ltd.
HD122/02 /TC
CA
135°C
ABUTTED
(Polished reflector)
HD122/03 /TC
ONLY
(Satin reflector)
160mm
• 125mm dia. hole cut out
• Complete with Thermal Cut-out control
• Complies with AS/NZS60598.2.2:2001 Amendment A
• CA135 classification
• IP20
• Weight: 380gms
• Ceramic Vossloh-Schwabe E27 lampholder
• For indoor use only
• Paintable round white ceiling bezel
HD122/03/TC
Satin Silver
Reflector
HD122/TC
125mm dia.
hole cut out
144mm dia.
ceiling ring
OPT I ON S
HD 122 - 100W GLS
-120° -150° -180° 150°
120°
-90°
(m) Actual
lux
1
487
90°
2
-60°
60°
3
250
4
-30°
30°
500
5
cd/1000lm
0°
Beam Angle 90° L.O.R: 65.2%
Reflectance
C W F
70 50 20
30
10
50 50 20
30
10
30 50 20
30
10
0 0 0
Room Index
0.75 1.0
.49 .55
.45 .51
.42 .48
.48 .53
.45 .50
.42 .48
.47 .52
.44 .50
.42 .48
.41 .46
1.25
.58
.55
.52
.57
.54
.52
.56
.53
.51
.50
2.00
121
4.00
54
6.00
90°
30
2m
1.50
.61
.58
.55
.59
.57
.55
.58
.56
.54
.52
1m
2.0
.64
.62
.59
.62
.60
.58
.61
.59
.57
.55
5
Order separately from downlight
dia.
(m)
2.5
.66
.64
.62
.64
.62
.61
.62
.61
.59
.57
OPT/13
Polished Chrome
Ceiling Ring
OPT/14
Brushed Chrome
Ceiling Ring
OPT/55
Silver Painted
Ceiling Ring
OPT/SQ/13
Polished Chrome
Ceiling Plate
OPT/SQ/14
Brushed Chrome
Ceiling Plate
A C C ESSOR I ES
Order separately from downlight
8.00
0
1m
3.0
.68
.66
.64
.66
.64
.62
.63
.62
.61
.58
4.0
.70
.68
.66
.67
.66
.65
.65
.64
.63
.60
2m
5.0
.71
.69
.68
.68
.67
.66
.66
.65
.64
.61
DO NOT COVER
D 0.5m
HD122/02/TC
Polished Silver
Reflector
A2-CL
IP54
Convex Clear Lens
/01 White trim
/55 Silver trim
A2-FT
IP54
Convex Frosted Lens
/01 White trim
/55 Silver trim
A5
IP20
Halo Glass
CFL-I 18W max. lamp only
Minimum distance to
flammable object.
RoHS
compliant
www.homedownlights.co.nz
8
A division of Gerard Lighting (NZ) Ltd.
HD60TC
IC rated downlight with
white round ceiling bezel
•
•
•
•
•
•
•
•
125mm dia. hole cut out
Thermal Cut-Out control
Complies with AS/NZS60598.2.2001 Amendment A
IC classification
IP20
Weight: 330gms
Ceramic Vossloh-Schwabe E27 lampholder
Paintable white ceiling ring
HD60TC
White Round
Ceiling Ring
(standard)
NB: White Ceiling Ring and Satin Silver
Reflector fitted as standard.
Order separately from downlight
100mm
OPT I ON S
144mm dia.
overall
HD60/RD/13
Polished Chrome
Ceiling Plate
Round
A2-60-CL IP54
Clear Flush Lens
5
HD60/SQ/13
Polished Chrome
Ceiling Plate
Square
A2-60-FT IP54
Frosted Flush Lens
OPT/14
Brushed Chrome
Ceiling Ring
OPT/SQ/14
Brushed Chrome
Ceiling Plate
RoHS
compliant
www.homedownlights.co.nz
9
A division of Gerard Lighting (NZ) Ltd.
HD60TC
125mm dia.
hole cut out
Importance of Insulation Guards
on IC and IC-F Rated Downlights
Mike Austin, Home Lighting’s Technical Manager and member of the
Lighting Council NZ, explains the need for insulation guards on
IC and IC-F rated downlights.
“The primary cause of
LED lumen depreciation is
heat generated at the LED
junction...Operating the
LED at higher than design
temperatures will significantly
decrease useful life”.
Ever wondered why some LED downlights have
insulation guards fitted and others haven’t?
There is a very good reason reputable LED downlight
manufacturers go to all the trouble and expense
of designing and fitting insulation guards – to make
sure the LED downlights will go the distance.
These guards are designed to keep thermal
insulation from touching the heat sinks. Extensive
testing has shown a gap of as little as 12mm
maintained between insulation and the heat sink will
result in LED junction temperatures (the most critical
point) being reduced up to 22°C.
Source: US Department of Energy – Lifetime of White LEDs
Insulation Guard
This is hugely significant in terms of LED life and
performance, or “lumen depreciation” in lighting
talk.
Consider this excerpt from the article “Lifetime
of White LEDs” published by the US Department
of Energy: “The primary cause of LED lumen
depreciation is heat generated at the LED
junction...Operating the LED at higher than design
temperatures will significantly decrease useful life.”
Home Lighting has been testing and designing
insulation guards for more than four years and
you will find there is only a very small number of NZ
manufacturers or importers who have gone to the
same trouble.
If you look at the range of LED downlights on the
market today you will find the majority DO NOT have
insulation guards fitted. Why? Because they are
imported exactly as they are sold in other countries
where there are no IC or IC-F rated downlights.
www.homedownlights.co.nz
Choose wisely and ensure your customer get the
life and performance from their LED downlights, and
make sure they all have insulation guards fitted.
© Home Lighting 2015. All Rights Reserved.
10
A division of Gerard Lighting (NZ) Ltd.
Eclipse SmartLED Dimmer
Optimised for LED
HLDIM-ECL
HLDIM-ECL
Eclipse SmartLED
Dimmer
SmartLED phase adaptive dimmer
optimised for LED-based lamps and drivers
• Fits PDL, HPM and Clipsal NZ wall switch plate apertures
• Optimised for LED lighting loads
• Also suitable for 12V dichroic, incandescent and dimmable CFL lamps
• 400W maximum, 2W minimum LED load
Includes:
1 x Eclipse SmartLED
dimmer module
3 x Dimmer knobs
1 x PDL600 Adaptor set
• Adjustment for minimum brightness level
• 2-wire design - no neutral connection required
• Suitable for 2-way switching
• 220-240V AC
• 50Hz
Compatible with all PDL, HPM
and Clipsal switch plates.
• <1% to >95% (load dependent)
Integrated LED indicator
illuminates the dimmer knob and
switch at low dimming levels.
LED compatibility
The Home Lighting Eclipse SmartLED Adaptive
Phase Dimmer has been tested for compatibility
with a number of common New Zealand LED
lighting products and brands including,
Home Lighting, Sylvania, Pierlite, Crompton,
OSRAM etc. in our NZ testing facility. While
we cannot test every combination and every
product, Home Lighting’s Eclipse SmartLED
Dimmer performs exceptionally well in a wide
3
range of LED and non-LED lighting circuits.
1
2
If you do not get the desired performance:
4
• Please check carefully that the LED lighting
product you are using is capable of dimming and to what level
• That the circuit loading <1% to >95% is not exceeded
Contact our NZ-based Technical Support Team
PDL600 Adaptor Set
1
on 0800 733 544 or
support@homedownlights.co.nz for further
2
4
assistance.
5
www.homedownlights.co.nz
11
A division of Gerard Lighting (NZ) Ltd.
HLDIM-ECL
Switch plate not included.
HL12-NF
Compact dimmable LED
gimbal downlight with
Narrow Flange
•
•
•
•
•
•
•
•
•
•
•
•
•
CA
135°C
ABUTTED
ONLY
76mm dia. hole cut out
12W CREE LED, 700 Lumens
25,000 hours average lamp life
Complies with AS/NZS60598.2.2001 Amendment A
CA135
IP20
Weight: 160gms
Complete with dimmable LED driver
Dimmable on most leading and/or trailing edge and universal dimmers
Colours: Warm White 3000K & Cool White 4000K
Tiltable 30° each way
For indoor use only
White or Silver Painted finish
HL12-NF/01
Narrow Flange
White Finish
3000K
HL12-NF/55
Narrow Flange
Silver Painted Finish
3000K
HL12-NF
HL12-NF/01/4K
Narrow Flange
White Finish
4000K
HL12-NF/55/4K
Narrow Flange
Silver Painted Finish
4000K
NB: Supplied complete with driver (not shown)
RoHS
25,000
compliant
O
N
LED
L E D
M
L
ODU
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
12
A division of Gerard Lighting (NZ) Ltd.
HL12-WF
Compact dimmable LED
gimbal downlight with
Wide Flange
ONLY
76-92mm dia. hole cut out
12W CREE LED, 700 Lumens
25,000 hours average lamp life
Complies with AS/NZS60598.2.2001 Amendment A
CA135
IP20
Weight: 180gms
Complete with dimmable LED driver
Dimmable on most leading and/or trailing edge and universal dimmers
Colours: Warm White 3000K & Cool White 4000K
Tiltable 30° each way
For indoor use only
White or Silver Painted finish
HL12-WF/01
Wide Flange
White Finish
3000K
HL12-WF/55
Wide Flange Silver
Painted Finish
3000K
HL12-WF/01/4K
Wide Flange
White Finish
4000K
HL12-WF
•
•
•
•
•
•
•
•
•
•
•
•
•
CA
135°C
ABUTTED
HL12-WF/55/4K
Wide Flange Silver
Painted Finish
4000K
NB: Supplied complete with driver (not shown)
RoHS
25,000
compliant
O
N
LED
L E D
M
L
ODU
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
13
A division of Gerard Lighting (NZ) Ltd.
HL94LED-ICF
12W LED Low Height
dimmable downlight
• 94-96mm dia. hole cut out
• 12W LED, 810 Lumens
• 35,000 hours average lamp life
• 105° wide beam angle
• Complies with AS/NZS60598.2.2:2001 Amendment A
• IC-F
• IP44
• Weight: 320gms
• Colour Temperature: 3000K
• Average Lamp Life: 35,000 hrs
• Complete with remote dimmable LED driver
with plug to fixture
• Leading & Trailing Edge and C-Bus Compatible
• White or Silver Painted Finishes
• Ideal for general lighting
• For indoor use only
• White Ceiling Bezel
HL 94LED-ICF
HL94LED-IC
White Round Ceiling
Ring (standard)
HL94LED-IC/55
Silver Painted Round
Ceiling Ring
NB: Supplied complete with driver (not shown)
D 0.1m
Minimum distance to
flammable object.
RoHS
35,000
compliant
O
N
LED
L E D
M
L
ODU
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
14
A division of Gerard Lighting (NZ) Ltd.
HL122LED-ICF
12W LED dimmable
downlight with
125mm hole cut out
HL122LED-ICF
White ceiling
bezel
HL122/55LED-ICF
Silver painted
ceiling bezel
125mm
140mm
NB: Supplied complete with driver (not shown)
D 0.1m
Minimum distance to
flammable object.
RoHS
30,000
compliant
O
N
LED
L E D
M
L
ODU
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
15
A division of Gerard Lighting (NZ) Ltd.
HL122LED-ICF
60mm
• 125mm dia. hole cut out
• 12W LED, 810 lumens
• 30,000 hours average lamp life
• Complies with AS/NZS60598.2.2:2001 Amendment A
• IC-F
• IP44
• Weight: 300gms
• Colour Temperature: 3000K
• Complete with remote dimmable LED driver
• White or silver ceiling bezel
• Wide beam angle perfect for general lighting
• Warm white 3000K
• For indoor use only
HL109LED-ICF
HL109LED-IC
White ceiling
bezel (standard)
12W LED version of the
popular HD109TC
downlight
• 100mm dia. hole cut out
• 12W LED, 810 Lumen
• 35,000 hours average lamp life
• Complies with AS/NZS60598.2.2:2001 Amendment A
• IC-F
• IP44
• Weight: 345gms
• Complete with dimmable LED driver
• Paintable white ceiling bezel
• For indoor use only
• Wide beam angle perfect for general lighting
• Warm white 3000K
• White or Silver Painted finish
73mm
HL109LED-ICF
NB: White Ceiling Bezel and Polished Silver
Reflector fitted as standard.
HL109LED-IC/55
Silver painted
ceiling bezel
100mm dia.
hole cut out
D 0.1m
120mm dia.
overall
NB: Supplied complete with driver (not shown)
Minimum distance to
flammable object.
RoHS
35,000
compliant
O
N
LED
L E D
M
L
ODU
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
16
A division of Gerard Lighting (NZ) Ltd.
HL109LED/EXT
HL109LED/EXT
Polycarbonate
reflector
12W LED exterior version
of the HL109LED with
non-corrosive
polycarbonate reflector
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100mm dia. hole cut out
12W LED, 810 Lumen
35,000 hours average lamp life
Complies with AS/NZS60598.2.2:2001 Amendment A
IC-F
Non-corrosive polycarbonate reflector
IP44
Weight: 345gms
Complete with dimmable LED driver
Paintable white ceiling bezel
For indoor or outdoor use under eaves
Wide beam angle perfect for general lighting
Warm white 3000K
White finish
100mm dia.
hole cut out
D 0.1m
120mm dia.
overall
NB: Supplied complete with driver (not shown)
Minimum distance to
flammable object.
RoHS
35,000
compliant
O
N
LED
L E D
M
L
ODU
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
17
A division of Gerard Lighting (NZ) Ltd.
HL109LED/EXT
73mm
NB: White Ceiling Bezel fitted as standard.
Phoenix
HL88F-IC
10W fire rated LED downlight
• 85mm dia. hole cut out
• 10W CREE LED, 600 Lumens
• 30,000 hours average lamp life
• Complies with AS/NZS60598.2.2:2001
(NZ only) Amendment A
• 30 / 90 minute fire rated
• 20° tiltable
• 40° beam angle
• IC
• IP20
• Weight: 340gms
• Complete with Sylvania dimmable LED
driver and insulation cover
• Average Lamp Life: 30,000 hours
• Steel chassis and White Bezel
• Warm White (3000K) or Cool White (4000K)
• For indoor use only
Phoenix HL 88F-IC
HL88F-IC/3K
3000K
HL88F-IC/4K
4000K
NB: Supplied complete with driver (not shown)
D 0.1m
Minimum distance to
flammable object.
RoHS
30,000
compliant
O
N
LED
L E D
MOD
UL
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
18
A division of Gerard Lighting (NZ) Ltd.
HL-LED-LEAD
300mm LED driver extension lead
HL-LED-LEAD
300mm LED
driver extension
lead
• 300mm length
• Quick and easy to use
• No fixings required
Home Lighting’s LED 300mm Extension Lead
is designed to make installation of all Home
Lighting LED products easier and ensure
correct placement of the driver every
time, preserving its life.
As all Home Lighting LED drivers must be
installed above insulation this lead provides
an extension to allow placement of driver
on top of extra thick insulation or attaching
to a building element that is further away
from the downlight.
HL-LED-LEAD
Quick and easy to use, clicks into the plugs
of the driver and fitting leads with no fixings
required.
This will ensure the driver and fitting are
operating at correct temperatures helping
to ensure the long life of your light fitting.
NB: Downlight and driver supplied separately
L E D
L I G H T I N G
www.homedownlights.co.nz
19
A division of Gerard Lighting (NZ) Ltd.
Kameleon
A new range of customisable and interchangeable
LED downlight combinations to suit your home.
12W CREE LED Module
Complete with dimmable driver
and customisable reflector or lens.
• 12W, 740 lumens
• 30,000 hours average lamp life
• IC-F rated
• Includes insulation cage
• Warm White, 3000K
• 7 Year Warranty
KAM 30R
KAM 60R
KAM 30L
KAM 60L
30° beam angle
reflector
60° beam angle
reflector
30° beam angle
lens
60° beam angle
lens
RoHS
30,000
compliant
O
N
LED
L E D
M
L
ODU
HOURS
E
L I G H T I N G
www.homedownlights.co.nz
20
A division of Gerard Lighting (NZ) Ltd.
K1
K5
90mm cutout. Round White
Gimbal Tilt Ceiling Ring
90mm cutout. Round White
Gimbal Tilt Ceiling Ring
with Ribbed White Baffle
K6
K2
90mm cutout. Square White
Gimbal Tilt Ceiling Ring
with Ribbed White Baffle
(110x110mm)
90mm cutout. Square White
Gimbal Tilt Ceiling Ring
(110x110mm)
K3
K7
90mm cutout. Round White
Gimbal Tilt Ceiling Ring
with Black Baffle
90mm cutout. Round White
Gimbal Tilt Ceiling Ring
with Ribbed Black Baffle
K4
K8
90mm cutout. Square White
Gimbal Tilt Ceiling Ring
with Black Baffle
(110x110mm)
90mm cutout. Square White
Gimbal Tilt Ceiling Ring
with Ribbed Black Baffle
(110x110mm)
K9
K10
70mm cutout. Round White
Fixed Ceiling Ring
70mm cutout. Square White
Fixed Ceiling Ring
(90x90mm)
21
ARCH DOWN
- Die-cast aluminium body
- Clear glass diffuser
- GU10 Max 35W
- 220-240v ~ 50Hz
- IP44
- Matt black
- Lamp sold separately
- LED compatible
- 68mm W x 92mm D x 81mm H
68
APPLICATIONS
- Exterior wall
81
Product Code: HE2291BLK
92
2
www.homedownlights.co.nz
22
A division of Gerard Lighting (NZ) Ltd.
ARCH UP/DOWN
- Die-cast aluminium body
- Clear glass diffuser
- GU10 Max 2 x 35W
- 220-240v ~ 50Hz
- IP44
- Matt black
- Lamp sold separately
- LED compatible
- 68mm W x 92mm D x 150mm H
68
APPLICATIONS
- Exterior wall
150
Product Code: HE2292BLK
92
2
www.homedownlights.co.nz
23
A division of Gerard Lighting (NZ) Ltd.
TABLET DOWN
- Die-cast aluminium body
- Frosted glass diffuser
- 3 x 1W LEDs warm white
- 220-240v ~ 50Hz
- IP44
- Matt black
- LED
- 95mm W x 82mm D x 198mm H
APPLICATIONS
- Exterior wall
Product Code: HE2162BLK
2
www.homedownlights.co.nz
24
A division of Gerard Lighting (NZ) Ltd.
TABLET UP/DOWN
- Die-cast aluminium body
- Frosted glass diffuser
- 6 x 1W LEDs warm white
- 220-240v ~ 50Hz
- IP44
- Matt black
- LED
- 95mm W x 82mm D x 198mm H
APPLICATIONS
- Exterior wall
Product Code: HE2161BLK
2
www.homedownlights.co.nz
25
A division of Gerard Lighting (NZ) Ltd.
LINEAR ROUND
- Die-cast aluminium body
- Opal PC diffuser
- 3 x 1W LEDs warm white
- 220-240v ~ 50Hz
- IP44
- Matt black
- LED
- 140mm dia., 55mm D
APPLICATIONS
- Exterior wall
Product Code: HE1003SBLKRD
2
www.homedownlights.co.nz
26
A division of Gerard Lighting (NZ) Ltd.
HOURGLASS ROUND
- Die-cast aluminium body
- Opal PC diffuser
- 3 x 1W LEDs warm white
- 220-240v ~ 50Hz
- IP44
- Matt black
- LED
- 140mm dia., 55mm D
APPLICATIONS
- Exterior wall
Product Code: HE1002SBLKRD
2
www.homedownlights.co.nz
27
A division of Gerard Lighting (NZ) Ltd.
LINEAR SQUARE
- Die-cast aluminium body
- Opal PC diffuser
- 3 x 1W LEDs warm white
- 220-240v ~ 50Hz
- IP44
- Matt black
- LED
- 140mm W x 53mm D x 140mm H
APPLICATIONS
- Exterior wall
Product Code: HE1013SBLKSQ
2
www.homedownlights.co.nz
28
A division of Gerard Lighting (NZ) Ltd.
HOURGLASS SQUARE
- Die-cast aluminium body
- Opal PC diffuser
- 3 x 1W LEDs warm white
- 220-240v ~ 50Hz
- IP44
- Matt black
- LED
- 140mm W x 53mm D x 140mm H
APPLICATIONS
- Exterior wall
Product Code: HE1012SBLKSQ
2
www.homedownlights.co.nz
29
A division of Gerard Lighting (NZ) Ltd.
BRICK UP/DOWN
- Die-cast aluminium body
- Frosted glass diffuser
- 6 x 1W LEDs warm white
- 220-240v ~ 50Hz
- IP44
- Matt black
- LED
110
APPLICATIONS
- Exterior wall
71
Product Code: HE2041BLK
172
2
www.homedownlights.co.nz
30
A division of Gerard Lighting (NZ) Ltd.
‘The Giants’
IP66 Exterior Range
12W LED IP66 Round and Oval
Ceiling/Wall Lights
• 12W LED
• 840 lumens
• IP66 weather protection
• 20,000 hours average lamp life
• Non-corrosive polycarbonate housing
• Opal diffuser
• Indoor or outdoor use
• 3000K Warm White
• Sensor option available (on Kauri or Rimu only)
• Oval 290 x 200 x 100mm or
Round ø300 x 100mm
• Black or White
• 2 Year Warranty
Kauri
HERCL/BLKLED
Round, Black*
* Sensor options available
Rimu
HERCL/WHLED
Round, White*
Manuka
HEOCL/BLKLED
Oval, Black
Totara
HEOCL/BLKLED
Oval, White
2
www.homedownlights.co.nz
20,000
HOURS
31
A division of Gerard Lighting (NZ) Ltd.
ONE HOME, ONE CHOICE
For more information
Phone 0800 733 544
Fax 09 525 8047
support@homedownlights.co.nz
INTEGRITY
REASSURANCE
www.homedownlights.co.nz
© Home Lighting 2015
QUALITY